busybox/networking/ifenslave.c
<<
>>
Prefs
   1/* Mode: C;
   2 *
   3 * Mini ifenslave implementation for busybox
   4 * Copyright (C) 2005 by Marc Leeman <marc.leeman@barco.com>
   5 *
   6 * ifenslave.c: Configure network interfaces for parallel routing.
   7 *
   8 *      This program controls the Linux implementation of running multiple
   9 *      network interfaces in parallel.
  10 *
  11 * Author:      Donald Becker <becker@cesdis.gsfc.nasa.gov>
  12 *              Copyright 1994-1996 Donald Becker
  13 *
  14 *              This program is free software; you can redistribute it
  15 *              and/or modify it under the terms of the GNU General Public
  16 *              License as published by the Free Software Foundation.
  17 *
  18 *      The author may be reached as becker@CESDIS.gsfc.nasa.gov, or C/O
  19 *      Center of Excellence in Space Data and Information Sciences
  20 *         Code 930.5, Goddard Space Flight Center, Greenbelt MD 20771
  21 *
  22 *  Changes :
  23 *    - 2000/10/02 Willy Tarreau <willy at meta-x.org> :
  24 *       - few fixes. Master's MAC address is now correctly taken from
  25 *         the first device when not previously set ;
  26 *       - detach support : call BOND_RELEASE to detach an enslaved interface.
  27 *       - give a mini-howto from command-line help : # ifenslave -h
  28 *
  29 *    - 2001/02/16 Chad N. Tindel <ctindel at ieee dot org> :
  30 *       - Master is now brought down before setting the MAC address.  In
  31 *         the 2.4 kernel you can't change the MAC address while the device is
  32 *         up because you get EBUSY.
  33 *
  34 *    - 2001/09/13 Takao Indoh <indou dot takao at jp dot fujitsu dot com>
  35 *       - Added the ability to change the active interface on a mode 1 bond
  36 *         at runtime.
  37 *
  38 *    - 2001/10/23 Chad N. Tindel <ctindel at ieee dot org> :
  39 *       - No longer set the MAC address of the master.  The bond device will
  40 *         take care of this itself
  41 *       - Try the SIOC*** versions of the bonding ioctls before using the
  42 *         old versions
  43 *    - 2002/02/18 Erik Habbinga <erik_habbinga @ hp dot com> :
  44 *       - ifr2.ifr_flags was not initialized in the hwaddr_notset case,
  45 *         SIOCGIFFLAGS now called before hwaddr_notset test
  46 *
  47 *    - 2002/10/31 Tony Cureington <tony.cureington * hp_com> :
  48 *       - If the master does not have a hardware address when the first slave
  49 *         is enslaved, the master is assigned the hardware address of that
  50 *         slave - there is a comment in bonding.c stating "ifenslave takes
  51 *         care of this now." This corrects the problem of slaves having
  52 *         different hardware addresses in active-backup mode when
  53 *         multiple interfaces are specified on a single ifenslave command
  54 *         (ifenslave bond0 eth0 eth1).
  55 *
  56 *    - 2003/03/18 - Tsippy Mendelson <tsippy.mendelson at intel dot com> and
  57 *                   Shmulik Hen <shmulik.hen at intel dot com>
  58 *       - Moved setting the slave's mac address and openning it, from
  59 *         the application to the driver. This enables support of modes
  60 *         that need to use the unique mac address of each slave.
  61 *         The driver also takes care of closing the slave and restoring its
  62 *         original mac address upon release.
  63 *         In addition, block possibility of enslaving before the master is up.
  64 *         This prevents putting the system in an undefined state.
  65 *
  66 *    - 2003/05/01 - Amir Noam <amir.noam at intel dot com>
  67 *       - Added ABI version control to restore compatibility between
  68 *         new/old ifenslave and new/old bonding.
  69 *       - Prevent adding an adapter that is already a slave.
  70 *         Fixes the problem of stalling the transmission and leaving
  71 *         the slave in a down state.
  72 *
  73 *    - 2003/05/01 - Shmulik Hen <shmulik.hen at intel dot com>
  74 *       - Prevent enslaving if the bond device is down.
  75 *         Fixes the problem of leaving the system in unstable state and
  76 *         halting when trying to remove the module.
  77 *       - Close socket on all abnormal exists.
  78 *       - Add versioning scheme that follows that of the bonding driver.
  79 *         current version is 1.0.0 as a base line.
  80 *
  81 *    - 2003/05/22 - Jay Vosburgh <fubar at us dot ibm dot com>
  82 *       - ifenslave -c was broken; it's now fixed
  83 *       - Fixed problem with routes vanishing from master during enslave
  84 *         processing.
  85 *
  86 *    - 2003/05/27 - Amir Noam <amir.noam at intel dot com>
  87 *       - Fix backward compatibility issues:
  88 *         For drivers not using ABI versions, slave was set down while
  89 *         it should be left up before enslaving.
  90 *         Also, master was not set down and the default set_mac_address()
  91 *         would fail and generate an error message in the system log.
  92 *       - For opt_c: slave should not be set to the master's setting
  93 *         while it is running. It was already set during enslave. To
  94 *         simplify things, it is now handeled separately.
  95 *
  96 *    - 2003/12/01 - Shmulik Hen <shmulik.hen at intel dot com>
  97 *       - Code cleanup and style changes
  98 *         set version to 1.1.0
  99 */
 100
 101//usage:#define ifenslave_trivial_usage
 102//usage:       "[-cdf] MASTER_IFACE SLAVE_IFACE..."
 103//usage:#define ifenslave_full_usage "\n\n"
 104//usage:       "Configure network interfaces for parallel routing\n"
 105//usage:     "\n        -c,--change-active      Change active slave"
 106//usage:     "\n        -d,--detach             Remove slave interface from bonding device"
 107//usage:     "\n        -f,--force              Force, even if interface is not Ethernet"
 108/* //usage:  "\n        -r,--receive-slave      Create a receive-only slave" */
 109//usage:
 110//usage:#define ifenslave_example_usage
 111//usage:       "To create a bond device, simply follow these three steps:\n"
 112//usage:       "- ensure that the required drivers are properly loaded:\n"
 113//usage:       "  # modprobe bonding ; modprobe <3c59x|eepro100|pcnet32|tulip|...>\n"
 114//usage:       "- assign an IP address to the bond device:\n"
 115//usage:       "  # ifconfig bond0 <addr> netmask <mask> broadcast <bcast>\n"
 116//usage:       "- attach all the interfaces you need to the bond device:\n"
 117//usage:       "  # ifenslave bond0 eth0 eth1 eth2\n"
 118//usage:       "  If bond0 didn't have a MAC address, it will take eth0's. Then, all\n"
 119//usage:       "  interfaces attached AFTER this assignment will get the same MAC addr.\n\n"
 120//usage:       "  To detach a dead interface without setting the bond device down:\n"
 121//usage:       "  # ifenslave -d bond0 eth1\n\n"
 122//usage:       "  To set the bond device down and automatically release all the slaves:\n"
 123//usage:       "  # ifconfig bond0 down\n\n"
 124//usage:       "  To change active slave:\n"
 125//usage:       "  # ifenslave -c bond0 eth0\n"
 126
 127#include "libbb.h"
 128
 129/* #include <net/if.h> - no. linux/if_bonding.h pulls in linux/if.h */
 130#include <linux/if.h>
 131//#include <net/if_arp.h> - not needed?
 132#include <linux/if_bonding.h>
 133#include <linux/sockios.h>
 134#include "fix_u32.h" /* hack, so we may include kernel's ethtool.h */
 135#include <linux/ethtool.h>
 136#ifndef BOND_ABI_VERSION
 137# define BOND_ABI_VERSION 2
 138#endif
 139#ifndef IFNAMSIZ
 140# define IFNAMSIZ 16
 141#endif
 142
 143
 144struct dev_data {
 145        struct ifreq mtu, flags, hwaddr;
 146};
 147
 148
 149enum { skfd = 3 };      /* AF_INET socket for ioctl() calls. */
 150struct globals {
 151        unsigned abi_ver;       /* userland - kernel ABI version */
 152        smallint hwaddr_set;    /* Master's hwaddr is set */
 153        struct dev_data master;
 154        struct dev_data slave;
 155};
 156#define G (*ptr_to_globals)
 157#define abi_ver    (G.abi_ver   )
 158#define hwaddr_set (G.hwaddr_set)
 159#define master     (G.master    )
 160#define slave      (G.slave     )
 161#define INIT_G() do { \
 162        SET_PTR_TO_GLOBALS(xzalloc(sizeof(G))); \
 163} while (0)
 164
 165
 166/* NOINLINEs are placed where it results in smaller code (gcc 4.3.1) */
 167
 168static int ioctl_on_skfd(unsigned request, struct ifreq *ifr)
 169{
 170        return ioctl(skfd, request, ifr);
 171}
 172
 173static int set_ifrname_and_do_ioctl(unsigned request, struct ifreq *ifr, const char *ifname)
 174{
 175        strncpy_IFNAMSIZ(ifr->ifr_name, ifname);
 176        return ioctl_on_skfd(request, ifr);
 177}
 178
 179static int get_if_settings(char *ifname, struct dev_data *dd)
 180{
 181        int res;
 182
 183        res = set_ifrname_and_do_ioctl(SIOCGIFMTU, &dd->mtu, ifname);
 184        res |= set_ifrname_and_do_ioctl(SIOCGIFFLAGS, &dd->flags, ifname);
 185        res |= set_ifrname_and_do_ioctl(SIOCGIFHWADDR, &dd->hwaddr, ifname);
 186
 187        return res;
 188}
 189
 190static int get_slave_flags(char *slave_ifname)
 191{
 192        return set_ifrname_and_do_ioctl(SIOCGIFFLAGS, &slave.flags, slave_ifname);
 193}
 194
 195static int set_hwaddr(char *ifname, struct sockaddr *hwaddr)
 196{
 197        struct ifreq ifr;
 198
 199        memcpy(&(ifr.ifr_hwaddr), hwaddr, sizeof(*hwaddr));
 200        return set_ifrname_and_do_ioctl(SIOCSIFHWADDR, &ifr, ifname);
 201}
 202
 203static int set_mtu(char *ifname, int mtu)
 204{
 205        struct ifreq ifr;
 206
 207        ifr.ifr_mtu = mtu;
 208        return set_ifrname_and_do_ioctl(SIOCSIFMTU, &ifr, ifname);
 209}
 210
 211static int set_if_flags(char *ifname, int flags)
 212{
 213        struct ifreq ifr;
 214
 215        ifr.ifr_flags = flags;
 216        return set_ifrname_and_do_ioctl(SIOCSIFFLAGS, &ifr, ifname);
 217}
 218
 219static int set_if_up(char *ifname, int flags)
 220{
 221        int res = set_if_flags(ifname, flags | IFF_UP);
 222        if (res)
 223                bb_perror_msg("%s: can't up", ifname);
 224        return res;
 225}
 226
 227static int set_if_down(char *ifname, int flags)
 228{
 229        int res = set_if_flags(ifname, flags & ~IFF_UP);
 230        if (res)
 231                bb_perror_msg("%s: can't down", ifname);
 232        return res;
 233}
 234
 235static int clear_if_addr(char *ifname)
 236{
 237        struct ifreq ifr;
 238
 239        ifr.ifr_addr.sa_family = AF_INET;
 240        memset(ifr.ifr_addr.sa_data, 0, sizeof(ifr.ifr_addr.sa_data));
 241        return set_ifrname_and_do_ioctl(SIOCSIFADDR, &ifr, ifname);
 242}
 243
 244static int set_if_addr(char *master_ifname, char *slave_ifname)
 245{
 246#if (SIOCGIFADDR | SIOCSIFADDR \
 247  | SIOCGIFDSTADDR | SIOCSIFDSTADDR \
 248  | SIOCGIFBRDADDR | SIOCSIFBRDADDR \
 249  | SIOCGIFNETMASK | SIOCSIFNETMASK) <= 0xffff
 250#define INT uint16_t
 251#else
 252#define INT int
 253#endif
 254        static const struct {
 255                INT g_ioctl;
 256                INT s_ioctl;
 257        } ifra[] = {
 258                { SIOCGIFADDR,    SIOCSIFADDR    },
 259                { SIOCGIFDSTADDR, SIOCSIFDSTADDR },
 260                { SIOCGIFBRDADDR, SIOCSIFBRDADDR },
 261                { SIOCGIFNETMASK, SIOCSIFNETMASK },
 262        };
 263
 264        struct ifreq ifr;
 265        int res;
 266        unsigned i;
 267
 268        for (i = 0; i < ARRAY_SIZE(ifra); i++) {
 269                res = set_ifrname_and_do_ioctl(ifra[i].g_ioctl, &ifr, master_ifname);
 270                if (res < 0) {
 271                        ifr.ifr_addr.sa_family = AF_INET;
 272                        memset(ifr.ifr_addr.sa_data, 0,
 273                               sizeof(ifr.ifr_addr.sa_data));
 274                }
 275
 276                res = set_ifrname_and_do_ioctl(ifra[i].s_ioctl, &ifr, slave_ifname);
 277                if (res < 0)
 278                        return res;
 279        }
 280
 281        return 0;
 282}
 283
 284static void change_active(char *master_ifname, char *slave_ifname)
 285{
 286        struct ifreq ifr;
 287
 288        if (!(slave.flags.ifr_flags & IFF_SLAVE)) {
 289                bb_error_msg_and_die("%s is not a slave", slave_ifname);
 290        }
 291
 292        strncpy_IFNAMSIZ(ifr.ifr_slave, slave_ifname);
 293        if (set_ifrname_and_do_ioctl(SIOCBONDCHANGEACTIVE, &ifr, master_ifname)
 294         && ioctl_on_skfd(BOND_CHANGE_ACTIVE_OLD, &ifr)
 295        ) {
 296                bb_perror_msg_and_die(
 297                        "master %s, slave %s: can't "
 298                        "change active",
 299                        master_ifname, slave_ifname);
 300        }
 301}
 302
 303static NOINLINE int enslave(char *master_ifname, char *slave_ifname)
 304{
 305        struct ifreq ifr;
 306        int res;
 307
 308        if (slave.flags.ifr_flags & IFF_SLAVE) {
 309                bb_error_msg(
 310                        "%s is already a slave",
 311                        slave_ifname);
 312                return 1;
 313        }
 314
 315        res = set_if_down(slave_ifname, slave.flags.ifr_flags);
 316        if (res)
 317                return res;
 318
 319        if (abi_ver < 2) {
 320                /* Older bonding versions would panic if the slave has no IP
 321                 * address, so get the IP setting from the master.
 322                 */
 323                res = set_if_addr(master_ifname, slave_ifname);
 324                if (res) {
 325                        bb_perror_msg("%s: can't set address", slave_ifname);
 326                        return res;
 327                }
 328        } else {
 329                res = clear_if_addr(slave_ifname);
 330                if (res) {
 331                        bb_perror_msg("%s: can't clear address", slave_ifname);
 332                        return res;
 333                }
 334        }
 335
 336        if (master.mtu.ifr_mtu != slave.mtu.ifr_mtu) {
 337                res = set_mtu(slave_ifname, master.mtu.ifr_mtu);
 338                if (res) {
 339                        bb_perror_msg("%s: can't set MTU", slave_ifname);
 340                        return res;
 341                }
 342        }
 343
 344        if (hwaddr_set) {
 345                /* Master already has an hwaddr
 346                 * so set it's hwaddr to the slave
 347                 */
 348                if (abi_ver < 1) {
 349                        /* The driver is using an old ABI, so
 350                         * the application sets the slave's
 351                         * hwaddr
 352                         */
 353                        if (set_hwaddr(slave_ifname, &(master.hwaddr.ifr_hwaddr))) {
 354                                bb_perror_msg("%s: can't set hw address",
 355                                                slave_ifname);
 356                                goto undo_mtu;
 357                        }
 358
 359                        /* For old ABI the application needs to bring the
 360                         * slave back up
 361                         */
 362                        if (set_if_up(slave_ifname, slave.flags.ifr_flags))
 363                                goto undo_slave_mac;
 364                }
 365                /* The driver is using a new ABI,
 366                 * so the driver takes care of setting
 367                 * the slave's hwaddr and bringing
 368                 * it up again
 369                 */
 370        } else {
 371                /* No hwaddr for master yet, so
 372                 * set the slave's hwaddr to it
 373                 */
 374                if (abi_ver < 1) {
 375                        /* For old ABI, the master needs to be
 376                         * down before setting it's hwaddr
 377                         */
 378                        if (set_if_down(master_ifname, master.flags.ifr_flags))
 379                                goto undo_mtu;
 380                }
 381
 382                if (set_hwaddr(master_ifname, &(slave.hwaddr.ifr_hwaddr))) {
 383                        bb_error_msg("%s: can't set hw address",
 384                                master_ifname);
 385                        goto undo_mtu;
 386                }
 387
 388                if (abi_ver < 1) {
 389                        /* For old ABI, bring the master
 390                         * back up
 391                         */
 392                        if (set_if_up(master_ifname, master.flags.ifr_flags))
 393                                goto undo_master_mac;
 394                }
 395
 396                hwaddr_set = 1;
 397        }
 398
 399        /* Do the real thing */
 400        strncpy_IFNAMSIZ(ifr.ifr_slave, slave_ifname);
 401        if (set_ifrname_and_do_ioctl(SIOCBONDENSLAVE, &ifr, master_ifname)
 402         && ioctl_on_skfd(BOND_ENSLAVE_OLD, &ifr)
 403        ) {
 404                goto undo_master_mac;
 405        }
 406
 407        return 0;
 408
 409/* rollback (best effort) */
 410 undo_master_mac:
 411        set_hwaddr(master_ifname, &(master.hwaddr.ifr_hwaddr));
 412        hwaddr_set = 0;
 413        goto undo_mtu;
 414
 415 undo_slave_mac:
 416        set_hwaddr(slave_ifname, &(slave.hwaddr.ifr_hwaddr));
 417 undo_mtu:
 418        set_mtu(slave_ifname, slave.mtu.ifr_mtu);
 419        return 1;
 420}
 421
 422static int release(char *master_ifname, char *slave_ifname)
 423{
 424        struct ifreq ifr;
 425        int res = 0;
 426
 427        if (!(slave.flags.ifr_flags & IFF_SLAVE)) {
 428                bb_error_msg("%s is not a slave", slave_ifname);
 429                return 1;
 430        }
 431
 432        strncpy_IFNAMSIZ(ifr.ifr_slave, slave_ifname);
 433        if (set_ifrname_and_do_ioctl(SIOCBONDRELEASE, &ifr, master_ifname) < 0
 434         && ioctl_on_skfd(BOND_RELEASE_OLD, &ifr) < 0
 435        ) {
 436                return 1;
 437        }
 438        if (abi_ver < 1) {
 439                /* The driver is using an old ABI, so we'll set the interface
 440                 * down to avoid any conflicts due to same MAC/IP
 441                 */
 442                res = set_if_down(slave_ifname, slave.flags.ifr_flags);
 443        }
 444
 445        /* set to default mtu */
 446        set_mtu(slave_ifname, 1500);
 447
 448        return res;
 449}
 450
 451static NOINLINE void get_drv_info(char *master_ifname)
 452{
 453        struct ifreq ifr;
 454        struct ethtool_drvinfo info;
 455
 456        memset(&ifr, 0, sizeof(ifr));
 457        ifr.ifr_data = (caddr_t)&info;
 458        info.cmd = ETHTOOL_GDRVINFO;
 459        /* both fields are 32 bytes long (long enough) */
 460        strcpy(info.driver, "ifenslave");
 461        strcpy(info.fw_version, utoa(BOND_ABI_VERSION));
 462        if (set_ifrname_and_do_ioctl(SIOCETHTOOL, &ifr, master_ifname) < 0) {
 463                if (errno == EOPNOTSUPP)
 464                        return;
 465                bb_perror_msg_and_die("%s: SIOCETHTOOL error", master_ifname);
 466        }
 467
 468        abi_ver = bb_strtou(info.fw_version, NULL, 0);
 469        if (errno)
 470                bb_error_msg_and_die("%s: SIOCETHTOOL error", master_ifname);
 471}
 472
 473int ifenslave_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE;
 474int ifenslave_main(int argc UNUSED_PARAM, char **argv)
 475{
 476        char *master_ifname, *slave_ifname;
 477        int rv;
 478        int res;
 479        unsigned opt;
 480        enum {
 481                OPT_c = (1 << 0),
 482                OPT_d = (1 << 1),
 483                OPT_f = (1 << 2),
 484        };
 485#if ENABLE_LONG_OPTS
 486        static const char ifenslave_longopts[] ALIGN1 =
 487                "change-active\0"  No_argument "c"
 488                "detach\0"         No_argument "d"
 489                "force\0"          No_argument "f"
 490                /* "all-interfaces\0" No_argument "a" */
 491                ;
 492
 493        applet_long_options = ifenslave_longopts;
 494#endif
 495        INIT_G();
 496
 497        opt = getopt32(argv, "cdfa");
 498        argv += optind;
 499        if (opt & (opt-1)) /* Only one option can be given */
 500                bb_show_usage();
 501
 502        master_ifname = *argv++;
 503
 504        /* No interface names - show all interfaces. */
 505        if (!master_ifname) {
 506                display_interfaces(NULL);
 507                return EXIT_SUCCESS;
 508        }
 509
 510        /* Open a basic socket */
 511        xmove_fd(xsocket(AF_INET, SOCK_DGRAM, 0), skfd);
 512
 513        /* Exchange abi version with bonding module */
 514        get_drv_info(master_ifname);
 515
 516        slave_ifname = *argv++;
 517        if (!slave_ifname) {
 518                if (opt & (OPT_d|OPT_c)) {
 519                        /* --change or --detach, and no slaves given -
 520                         * show all interfaces. */
 521                        display_interfaces(slave_ifname /* == NULL */);
 522                        return 2; /* why 2? */
 523                }
 524                /* A single arg means show the
 525                 * configuration for this interface
 526                 */
 527                display_interfaces(master_ifname);
 528                return EXIT_SUCCESS;
 529        }
 530
 531        if (get_if_settings(master_ifname, &master)) {
 532                /* Probably a good reason not to go on */
 533                bb_perror_msg_and_die("%s: can't get settings", master_ifname);
 534        }
 535
 536        /* Check if master is indeed a master;
 537         * if not then fail any operation
 538         */
 539        if (!(master.flags.ifr_flags & IFF_MASTER))
 540                bb_error_msg_and_die("%s is not a master", master_ifname);
 541
 542        /* Check if master is up; if not then fail any operation */
 543        if (!(master.flags.ifr_flags & IFF_UP))
 544                bb_error_msg_and_die("%s is not up", master_ifname);
 545
 546#ifdef WHY_BOTHER
 547        /* Neither -c[hange] nor -d[etach] -> it's "enslave" then;
 548         * and -f[orce] is not there too. Check that it's ethernet. */
 549        if (!(opt & (OPT_d|OPT_c|OPT_f)) {
 550                /* The family '1' is ARPHRD_ETHER for ethernet. */
 551                if (master.hwaddr.ifr_hwaddr.sa_family != 1) {
 552                        bb_error_msg_and_die(
 553                                "%s is not ethernet-like (-f overrides)",
 554                                master_ifname);
 555                }
 556        }
 557#endif
 558
 559        /* Accepts only one slave */
 560        if (opt & OPT_c) {
 561                /* Change active slave */
 562                if (get_slave_flags(slave_ifname)) {
 563                        bb_perror_msg_and_die(
 564                                "%s: can't get flags", slave_ifname);
 565                }
 566                change_active(master_ifname, slave_ifname);
 567                return EXIT_SUCCESS;
 568        }
 569
 570        /* Accepts multiple slaves */
 571        res = 0;
 572        do {
 573                if (opt & OPT_d) {
 574                        /* Detach a slave interface from the master */
 575                        rv = get_slave_flags(slave_ifname);
 576                        if (rv) {
 577                                /* Can't work with this slave, */
 578                                /* remember the error and skip it */
 579                                bb_perror_msg(
 580                                        "skipping %s: can't get flags",
 581                                        slave_ifname);
 582                                res = rv;
 583                                continue;
 584                        }
 585                        rv = release(master_ifname, slave_ifname);
 586                        if (rv) {
 587                                bb_perror_msg("can't release %s from %s",
 588                                        slave_ifname, master_ifname);
 589                                res = rv;
 590                        }
 591                } else {
 592                        /* Attach a slave interface to the master */
 593                        rv = get_if_settings(slave_ifname, &slave);
 594                        if (rv) {
 595                                /* Can't work with this slave, */
 596                                /* remember the error and skip it */
 597                                bb_perror_msg(
 598                                        "skipping %s: can't get settings",
 599                                        slave_ifname);
 600                                res = rv;
 601                                continue;
 602                        }
 603                        rv = enslave(master_ifname, slave_ifname);
 604                        if (rv) {
 605                                bb_perror_msg("can't enslave %s to %s",
 606                                        slave_ifname, master_ifname);
 607                                res = rv;
 608                        }
 609                }
 610        } while ((slave_ifname = *argv++) != NULL);
 611
 612        if (ENABLE_FEATURE_CLEAN_UP) {
 613                close(skfd);
 614        }
 615
 616        return res;
 617}
 618