1# 2# For a description of the syntax of this configuration file, 3# see scripts/kbuild/config-language.txt. 4# 5 6mainmenu "Configuration" 7 8config HAVE_DOT_CONFIG 9 bool 10 default y 11 12menu "Settings" 13 14config DESKTOP 15 bool "Enable compatibility for full-blown desktop systems" 16 default y 17 help 18 Enable applet options and features which are not essential. 19 Many applet options have dedicated config options to (de)select them 20 under that applet; this options enables those options which have no 21 individual config item for them. 22 23 Select this if you plan to use busybox on full-blown desktop machine 24 with common Linux distro, which needs higher level of command-line 25 compatibility. 26 27 If you are preparing your build to be used on an embedded box 28 where you have tighter control over the entire set of userspace 29 tools, you can unselect this option for smaller code size. 30 31config EXTRA_COMPAT 32 bool "Provide compatible behavior for rare corner cases (bigger code)" 33 default n 34 help 35 This option makes grep, sed etc handle rare corner cases 36 (embedded NUL bytes and such). This makes code bigger and uses 37 some GNU extensions in libc. You probably only need this option 38 if you plan to run busybox on desktop. 39 40config FEDORA_COMPAT 41 bool "Building for Fedora distribution" 42 default n 43 help 44 This option makes some tools behave like they do on Fedora. 45 46 At the time of this writing (2017-08) this only affects uname: 47 normally, uname -p (processor) and uname -i (platform) 48 are shown as "unknown", but with this option uname -p 49 shows the same string as uname -m (machine type), 50 and so does uname -i unless machine type is i486/i586/i686 - 51 then uname -i shows "i386". 52 53config INCLUDE_SUSv2 54 bool "Enable obsolete features removed before SUSv3" 55 default y 56 help 57 This option will enable backwards compatibility with SuSv2, 58 specifically, old-style numeric options ('command -1 <file>') 59 will be supported in head, tail, and fold. (Note: should 60 affect renice too.) 61 62config LONG_OPTS 63 bool "Support --long-options" 64 default y 65 help 66 Enable this if you want busybox applets to use the gnu --long-option 67 style, in addition to single character -a -b -c style options. 68 69config SHOW_USAGE 70 bool "Show applet usage messages" 71 default y 72 help 73 Enabling this option, applets will show terse help messages 74 when invoked with wrong arguments. 75 If you do not want to show any (helpful) usage message when 76 issuing wrong command syntax, you can say 'N' here, 77 saving approximately 7k. 78 79config FEATURE_VERBOSE_USAGE 80 bool "Show verbose applet usage messages" 81 default y 82 depends on SHOW_USAGE 83 help 84 All applets will show verbose help messages when invoked with --help. 85 This will add a lot of text to the binary. 86 87config FEATURE_COMPRESS_USAGE 88 bool "Store applet usage messages in compressed form" 89 default y 90 depends on SHOW_USAGE 91 help 92 Store usage messages in .bz2 compressed form, uncompress them 93 on-the-fly when "APPLET --help" is run. 94 95 If you have a really tiny busybox with few applets enabled (and 96 bunzip2 isn't one of them), the overhead of the decompressor might 97 be noticeable. Also, if you run executables directly from ROM 98 and have very little memory, this might not be a win. Otherwise, 99 you probably want this. 100 101config LFS 102 bool "Support files > 2 GB" 103 default y 104 help 105 If you need to work with large files, enable this option. 106 This will have no effect if your kernel or your C 107 library lacks large file support for large files. Some of the 108 programs that can benefit from large file support include dd, gzip, 109 cp, mount, tar. 110 111config PAM 112 bool "Support PAM (Pluggable Authentication Modules)" 113 default n 114 help 115 Use PAM in some applets (currently login and httpd) instead 116 of direct access to password database. 117 118config FEATURE_DEVPTS 119 bool "Use the devpts filesystem for Unix98 PTYs" 120 default y 121 help 122 Enable if you want to use Unix98 PTY support. If enabled, 123 busybox will use /dev/ptmx for the master side of the pseudoterminal 124 and /dev/pts/<number> for the slave side. Otherwise, BSD style 125 /dev/ttyp<number> will be used. To use this option, you should have 126 devpts mounted. 127 128config FEATURE_UTMP 129 bool "Support utmp file" 130 default y 131 help 132 The file /var/run/utmp is used to track who is currently logged in. 133 With this option on, certain applets (getty, login, telnetd etc) 134 will create and delete entries there. 135 "who" applet requires this option. 136 137config FEATURE_WTMP 138 bool "Support wtmp file" 139 default y 140 depends on FEATURE_UTMP 141 help 142 The file /var/run/wtmp is used to track when users have logged into 143 and logged out of the system. 144 With this option on, certain applets (getty, login, telnetd etc) 145 will append new entries there. 146 "last" applet requires this option. 147 148config FEATURE_PIDFILE 149 bool "Support writing pidfiles" 150 default y 151 help 152 This option makes some applets (e.g. crond, syslogd, inetd) write 153 a pidfile at the configured PID_FILE_PATH. It has no effect 154 on applets which require pidfiles to run. 155 156config PID_FILE_PATH 157 string "Directory for pidfiles" 158 default "/var/run" 159 depends on FEATURE_PIDFILE 160 help 161 This is the default path where pidfiles are created. Applets which 162 allow you to set the pidfile path on the command line will override 163 this value. The option has no effect on applets that require you to 164 specify a pidfile path. 165 166config BUSYBOX 167 bool "Include busybox applet" 168 default y 169 help 170 The busybox applet provides general help message and allows 171 the included applets to be listed. It also provides 172 optional --install command to create applet links. If you unselect 173 this option, running busybox without any arguments will give 174 just a cryptic error message: 175 176 $ busybox 177 busybox: applet not found 178 179 Running "busybox APPLET [ARGS...]" will still work, of course. 180 181config FEATURE_INSTALLER 182 bool "Support --install [-s] to install applet links at runtime" 183 default y 184 depends on BUSYBOX 185 help 186 Enable 'busybox --install [-s]' support. This will allow you to use 187 busybox at runtime to create hard links or symlinks for all the 188 applets that are compiled into busybox. 189 190config INSTALL_NO_USR 191 bool "Don't use /usr" 192 default n 193 help 194 Disable use of /usr. "busybox --install" and "make install" 195 will install applets only to /bin and /sbin, 196 never to /usr/bin or /usr/sbin. 197 198config FEATURE_SUID 199 bool "Drop SUID state for most applets" 200 default y 201 help 202 With this option you can install the busybox binary belonging 203 to root with the suid bit set, enabling some applets to perform 204 root-level operations even when run by ordinary users 205 (for example, mounting of user mounts in fstab needs this). 206 207 With this option enabled, busybox drops privileges for applets 208 that don't need root access, before entering their main() function. 209 210 If you are really paranoid and don't want even initial busybox code 211 to run under root for every applet, build two busybox binaries with 212 different applets in them (and the appropriate symlinks pointing 213 to each binary), and only set the suid bit on the one that needs it. 214 215 Some applets which require root rights (need suid bit on the binary 216 or to be run by root) and will refuse to execute otherwise: 217 crontab, login, passwd, su, vlock, wall. 218 219 The applets which will use root rights if they have them 220 (via suid bit, or because run by root), but would try to work 221 without root right nevertheless: 222 findfs, ping[6], traceroute[6], mount. 223 224 Note that if you DO NOT select this option, but DO make busybox 225 suid root, ALL applets will run under root, which is a huge 226 security hole (think "cp /some/file /etc/passwd"). 227 228config FEATURE_SUID_CONFIG 229 bool "Enable SUID configuration via /etc/busybox.conf" 230 default y 231 depends on FEATURE_SUID 232 help 233 Allow the SUID/SGID state of an applet to be determined at runtime 234 by checking /etc/busybox.conf. (This is sort of a poor man's sudo.) 235 The format of this file is as follows: 236 237 APPLET = [Ssx-][Ssx-][x-] [USER.GROUP] 238 239 s: USER or GROUP is allowed to execute APPLET. 240 APPLET will run under USER or GROUP 241 (regardless of who's running it). 242 S: USER or GROUP is NOT allowed to execute APPLET. 243 APPLET will run under USER or GROUP. 244 This option is not very sensical. 245 x: USER/GROUP/others are allowed to execute APPLET. 246 No UID/GID change will be done when it is run. 247 -: USER/GROUP/others are not allowed to execute APPLET. 248 249 An example might help: 250 251 |[SUID] 252 |su = ssx root.0 # applet su can be run by anyone and runs with 253 | # euid=0,egid=0 254 |su = ssx # exactly the same 255 | 256 |mount = sx- root.disk # applet mount can be run by root and members 257 | # of group disk (but not anyone else) 258 | # and runs with euid=0 (egid is not changed) 259 | 260 |cp = --- # disable applet cp for everyone 261 262 The file has to be owned by user root, group root and has to be 263 writeable only by root: 264 (chown 0.0 /etc/busybox.conf; chmod 600 /etc/busybox.conf) 265 The busybox executable has to be owned by user root, group 266 root and has to be setuid root for this to work: 267 (chown 0.0 /bin/busybox; chmod 4755 /bin/busybox) 268 269 Robert 'sandman' Griebl has more information here: 270 <url: http://www.softforge.de/bb/suid.html >. 271 272config FEATURE_SUID_CONFIG_QUIET 273 bool "Suppress warning message if /etc/busybox.conf is not readable" 274 default y 275 depends on FEATURE_SUID_CONFIG 276 help 277 /etc/busybox.conf should be readable by the user needing the SUID, 278 check this option to avoid users to be notified about missing 279 permissions. 280 281config FEATURE_PREFER_APPLETS 282 bool "exec prefers applets" 283 default n 284 help 285 This is an experimental option which directs applets about to 286 call 'exec' to try and find an applicable busybox applet before 287 searching the PATH. This is typically done by exec'ing 288 /proc/self/exe. 289 290 This may affect shell, find -exec, xargs and similar applets. 291 They will use applets even if /bin/APPLET -> busybox link 292 is missing (or is not a link to busybox). However, this causes 293 problems in chroot jails without mounted /proc and with ps/top 294 (command name can be shown as 'exe' for applets started this way). 295 296config BUSYBOX_EXEC_PATH 297 string "Path to busybox executable" 298 default "/proc/self/exe" 299 help 300 When applets need to run other applets, busybox 301 sometimes needs to exec() itself. When the /proc filesystem is 302 mounted, /proc/self/exe always points to the currently running 303 executable. If you haven't got /proc, set this to wherever you 304 want to run busybox from. 305 306config SELINUX 307 bool "Support NSA Security Enhanced Linux" 308 default n 309 select PLATFORM_LINUX 310 help 311 Enable support for SELinux in applets ls, ps, and id. Also provide 312 the option of compiling in SELinux applets. 313 314 If you do not have a complete SELinux userland installed, this stuff 315 will not compile. Specifially, libselinux 1.28 or better is 316 directly required by busybox. If the installation is located in a 317 non-standard directory, provide it by invoking make as follows: 318 319 CFLAGS=-I<libselinux-include-path> \ 320 LDFLAGS=-L<libselinux-lib-path> \ 321 make 322 323 Most people will leave this set to 'N'. 324 325config FEATURE_CLEAN_UP 326 bool "Clean up all memory before exiting (usually not needed)" 327 default n 328 help 329 As a size optimization, busybox normally exits without explicitly 330 freeing dynamically allocated memory or closing files. This saves 331 space since the OS will clean up for us, but it can confuse debuggers 332 like valgrind, which report tons of memory and resource leaks. 333 334 Don't enable this unless you have a really good reason to clean 335 things up manually. 336 337# These are auto-selected by other options 338 339config FEATURE_SYSLOG 340 bool #No description makes it a hidden option 341 default n 342 #help 343 #This option is auto-selected when you select any applet which may 344 #send its output to syslog. You do not need to select it manually. 345 346config PLATFORM_LINUX 347 bool #No description makes it a hidden option 348 default n 349 #help 350 #For the most part, busybox requires only POSIX compatibility 351 #from the target system, but some applets and features use 352 #Linux-specific interfaces. 353 # 354 #This is automatically selected if any applet or feature requires 355 #Linux-specific interfaces. You do not need to select it manually. 356 357comment 'Build Options' 358 359config STATIC 360 bool "Build static binary (no shared libs)" 361 default n 362 help 363 If you want to build a static binary, which does not use 364 or require any shared libraries, enable this option. 365 Static binaries are larger, but do not require functioning 366 dynamic libraries to be present, which is important if used 367 as a system rescue tool. 368 369config PIE 370 bool "Build position independent executable" 371 default n 372 depends on !STATIC 373 help 374 Hardened code option. PIE binaries are loaded at a different 375 address at each invocation. This has some overhead, 376 particularly on x86-32 which is short on registers. 377 378 Most people will leave this set to 'N'. 379 380config NOMMU 381 bool "Force NOMMU build" 382 default n 383 help 384 Busybox tries to detect whether architecture it is being 385 built against supports MMU or not. If this detection fails, 386 or if you want to build NOMMU version of busybox for testing, 387 you may force NOMMU build here. 388 389 Most people will leave this set to 'N'. 390 391# PIE can be made to work with BUILD_LIBBUSYBOX, but currently 392# build system does not support that 393config BUILD_LIBBUSYBOX 394 bool "Build shared libbusybox" 395 default n 396 depends on !FEATURE_PREFER_APPLETS && !PIE && !STATIC 397 help 398 Build a shared library libbusybox.so.N.N.N which contains all 399 busybox code. 400 401 This feature allows every applet to be built as a really tiny 402 separate executable linked against the library: 403 |$ size 0_lib/l* 404 | text data bss dec hex filename 405 | 939 212 28 1179 49b 0_lib/last 406 | 939 212 28 1179 49b 0_lib/less 407 | 919138 8328 1556 929022 e2cfe 0_lib/libbusybox.so.1.N.M 408 409 This is useful on NOMMU systems which are not capable 410 of sharing executables, but are capable of sharing code 411 in dynamic libraries. 412 413config FEATURE_LIBBUSYBOX_STATIC 414 bool "Pull in all external references into libbusybox" 415 default n 416 depends on BUILD_LIBBUSYBOX 417 help 418 Make libbusybox library independent, not using or requiring 419 any other shared libraries. 420 421config FEATURE_INDIVIDUAL 422 bool "Produce a binary for each applet, linked against libbusybox" 423 default y 424 depends on BUILD_LIBBUSYBOX 425 help 426 If your CPU architecture doesn't allow for sharing text/rodata 427 sections of running binaries, but allows for runtime dynamic 428 libraries, this option will allow you to reduce memory footprint 429 when you have many different applets running at once. 430 431 If your CPU architecture allows for sharing text/rodata, 432 having single binary is more optimal. 433 434 Each applet will be a tiny program, dynamically linked 435 against libbusybox.so.N.N.N. 436 437 You need to have a working dynamic linker. 438 439config FEATURE_SHARED_BUSYBOX 440 bool "Produce additional busybox binary linked against libbusybox" 441 default y 442 depends on BUILD_LIBBUSYBOX 443 help 444 Build busybox, dynamically linked against libbusybox.so.N.N.N. 445 446 You need to have a working dynamic linker. 447 448### config BUILD_AT_ONCE 449### bool "Compile all sources at once" 450### default n 451### help 452### Normally each source-file is compiled with one invocation of 453### the compiler. 454### If you set this option, all sources are compiled at once. 455### This gives the compiler more opportunities to optimize which can 456### result in smaller and/or faster binaries. 457### 458### Setting this option will consume alot of memory, e.g. if you 459### enable all applets with all features, gcc uses more than 300MB 460### RAM during compilation of busybox. 461### 462### This option is most likely only beneficial for newer compilers 463### such as gcc-4.1 and above. 464### 465### Say 'N' unless you know what you are doing. 466 467config CROSS_COMPILER_PREFIX 468 string "Cross compiler prefix" 469 default "" 470 help 471 If you want to build busybox with a cross compiler, then you 472 will need to set this to the cross-compiler prefix, for example, 473 "i386-uclibc-". 474 475 Note that CROSS_COMPILE environment variable or 476 "make CROSS_COMPILE=xxx ..." will override this selection. 477 478 Native builds leave this empty. 479 480config SYSROOT 481 string "Path to sysroot" 482 default "" 483 help 484 If you want to build busybox with a cross compiler, then you 485 might also need to specify where /usr/include and /usr/lib 486 will be found. 487 488 For example, busybox can be built against an installed 489 Android NDK, platform version 9, for ARM ABI with 490 491 CONFIG_SYSROOT=/opt/android-ndk/platforms/android-9/arch-arm 492 493 Native builds leave this empty. 494 495config EXTRA_CFLAGS 496 string "Additional CFLAGS" 497 default "" 498 help 499 Additional CFLAGS to pass to the compiler verbatim. 500 501config EXTRA_LDFLAGS 502 string "Additional LDFLAGS" 503 default "" 504 help 505 Additional LDFLAGS to pass to the linker verbatim. 506 507config EXTRA_LDLIBS 508 string "Additional LDLIBS" 509 default "" 510 help 511 Additional LDLIBS to pass to the linker with -l. 512 513config USE_PORTABLE_CODE 514 bool "Avoid using GCC-specific code constructs" 515 default n 516 help 517 Use this option if you are trying to compile busybox with 518 compiler other than gcc. 519 If you do use gcc, this option may needlessly increase code size. 520 521comment 'Installation Options ("make install" behavior)' 522 523choice 524 prompt "What kind of applet links to install" 525 default INSTALL_APPLET_SYMLINKS 526 help 527 Choose what kind of links to applets are created by "make install". 528 529config INSTALL_APPLET_SYMLINKS 530 bool "as soft-links" 531 help 532 Install applets as soft-links to the busybox binary. This needs some 533 free inodes on the filesystem, but might help with filesystem 534 generators that can't cope with hard-links. 535 536config INSTALL_APPLET_HARDLINKS 537 bool "as hard-links" 538 help 539 Install applets as hard-links to the busybox binary. This might 540 count on a filesystem with few inodes. 541 542config INSTALL_APPLET_SCRIPT_WRAPPERS 543 bool "as script wrappers" 544 help 545 Install applets as script wrappers that call the busybox binary. 546 547config INSTALL_APPLET_DONT 548 bool "not installed" 549 help 550 Do not install applet links. Useful when you plan to use 551 busybox --install for installing links, or plan to use 552 a standalone shell and thus don't need applet links. 553 554endchoice 555 556choice 557 prompt "/bin/sh applet link" 558 default INSTALL_SH_APPLET_SYMLINK 559 depends on INSTALL_APPLET_SCRIPT_WRAPPERS 560 help 561 Choose how you install /bin/sh applet link. 562 563config INSTALL_SH_APPLET_SYMLINK 564 bool "as soft-link" 565 help 566 Install /bin/sh applet as soft-link to the busybox binary. 567 568config INSTALL_SH_APPLET_HARDLINK 569 bool "as hard-link" 570 help 571 Install /bin/sh applet as hard-link to the busybox binary. 572 573config INSTALL_SH_APPLET_SCRIPT_WRAPPER 574 bool "as script wrapper" 575 help 576 Install /bin/sh applet as script wrapper that calls 577 the busybox binary. 578 579endchoice 580 581config PREFIX 582 string "Destination path for 'make install'" 583 default "./_install" 584 help 585 Where "make install" should install busybox binary and links. 586 587comment 'Debugging Options' 588 589config DEBUG 590 bool "Build with debug information" 591 default n 592 help 593 Say Y here to compile with debug information. 594 This increases the size of the binary considerably, and 595 should only be used when doing development. 596 597 This adds -g option to gcc command line. 598 599 Most people should answer N. 600 601config DEBUG_PESSIMIZE 602 bool "Disable compiler optimizations" 603 default n 604 depends on DEBUG 605 help 606 The compiler's optimization of source code can eliminate and reorder 607 code, resulting in an executable that's hard to understand when 608 stepping through it with a debugger. This switches it off, resulting 609 in a much bigger executable that more closely matches the source 610 code. 611 612 This replaces -Os/-O2 with -O0 in gcc command line. 613 614config DEBUG_SANITIZE 615 bool "Enable runtime sanitizers (ASAN/LSAN/USAN/etc...)" 616 default n 617 help 618 Say Y here if you want to enable runtime sanitizers. These help 619 catch bad memory accesses (e.g. buffer overflows), but will make 620 the executable larger and slow down runtime a bit. 621 622 This adds -fsanitize=foo options to gcc command line. 623 624 If you aren't developing/testing busybox, say N here. 625 626config UNIT_TEST 627 bool "Build unit tests" 628 default n 629 help 630 Say Y here if you want to build unit tests (both the framework and 631 test cases) as an applet. This results in bigger code, so you 632 probably don't want this option in production builds. 633 634config WERROR 635 bool "Abort compilation on any warning" 636 default n 637 help 638 This adds -Werror to gcc command line. 639 640 Most people should answer N. 641 642choice 643 prompt "Additional debugging library" 644 default NO_DEBUG_LIB 645 help 646 Using an additional debugging library will make busybox become 647 considerably larger and will cause it to run more slowly. You 648 should always leave this option disabled for production use. 649 650 dmalloc support: 651 ---------------- 652 This enables compiling with dmalloc ( http://dmalloc.com/ ) 653 which is an excellent public domain mem leak and malloc problem 654 detector. To enable dmalloc, before running busybox you will 655 want to properly set your environment, for example: 656 export DMALLOC_OPTIONS=debug=0x34f47d83,inter=100,log=logfile 657 The 'debug=' value is generated using the following command 658 dmalloc -p log-stats -p log-non-free -p log-bad-space \ 659 -p log-elapsed-time -p check-fence -p check-heap \ 660 -p check-lists -p check-blank -p check-funcs -p realloc-copy \ 661 -p allow-free-null 662 663 Electric-fence support: 664 ----------------------- 665 This enables compiling with Electric-fence support. Electric 666 fence is another very useful malloc debugging library which uses 667 your computer's virtual memory hardware to detect illegal memory 668 accesses. This support will make busybox be considerably larger 669 and run slower, so you should leave this option disabled unless 670 you are hunting a hard to find memory problem. 671 672 673config NO_DEBUG_LIB 674 bool "None" 675 676config DMALLOC 677 bool "Dmalloc" 678 679config EFENCE 680 bool "Electric-fence" 681 682endchoice 683 684source libbb/Config.in 685 686endmenu 687 688comment "Applets" 689 690source archival/Config.in 691source coreutils/Config.in 692source console-tools/Config.in 693source debianutils/Config.in 694source klibc-utils/Config.in 695source editors/Config.in 696source findutils/Config.in 697source init/Config.in 698source loginutils/Config.in 699source e2fsprogs/Config.in 700source modutils/Config.in 701source util-linux/Config.in 702source miscutils/Config.in 703source networking/Config.in 704source printutils/Config.in 705source mailutils/Config.in 706source procps/Config.in 707source runit/Config.in 708source selinux/Config.in 709source shell/Config.in 710source sysklogd/Config.in 711