/* SPDX-License-Identifier: BSD-3-Clause
 * Copyright(c) 2010-2014 Intel Corporation
 */

#include <stdio.h>
#include <stdlib.h>
#include <stdint.h>
#include <inttypes.h>
#include <sys/types.h>
#include <string.h>
#include <sys/queue.h>
#include <stdarg.h>
#include <errno.h>
#include <getopt.h>

#include <rte_common.h>
#include <rte_byteorder.h>
#include <rte_log.h>
#include <rte_memory.h>
#include <rte_memcpy.h>
#include <rte_eal.h>
#include <rte_launch.h>
#include <rte_cycles.h>
#include <rte_prefetch.h>
#include <rte_lcore.h>
#include <rte_per_lcore.h>
#include <rte_branch_prediction.h>
#include <rte_interrupts.h>
#include <rte_random.h>
#include <rte_debug.h>
#include <rte_ether.h>
#include <rte_ethdev.h>
#include <rte_mempool.h>
#include <rte_mbuf.h>
#include <rte_malloc.h>
#include <rte_fbk_hash.h>
#include <rte_ip.h>

#define RTE_LOGTYPE_IPv4_MULTICAST RTE_LOGTYPE_USER1

#define MAX_PORTS 16

#define MCAST_CLONE_PORTS       2
#define MCAST_CLONE_SEGS        2

#define PKT_MBUF_DATA_SIZE      RTE_MBUF_DEFAULT_BUF_SIZE
#define NB_PKT_MBUF     8192

#define HDR_MBUF_DATA_SIZE      (2 * RTE_PKTMBUF_HEADROOM)
#define NB_HDR_MBUF     (NB_PKT_MBUF * MAX_PORTS)

#define NB_CLONE_MBUF   (NB_PKT_MBUF * MCAST_CLONE_PORTS * MCAST_CLONE_SEGS * 2)

/* allow max jumbo frame 9.5 KB */
#define JUMBO_FRAME_MAX_SIZE    0x2600

#define MAX_PKT_BURST 32
#define BURST_TX_DRAIN_US 100 /* TX drain every ~100us */

/* Configure how many packets ahead to prefetch, when reading packets */
#define PREFETCH_OFFSET 3

/*
 * Construct Ethernet multicast address from IPv4 multicast address.
 * Citing RFC 1112, section 6.4:
 * "An IP host group address is mapped to an Ethernet multicast address
 * by placing the low-order 23-bits of the IP address into the low-order
 * 23 bits of the Ethernet multicast address 01-00-5E-00-00-00 (hex)."
 */

/* Construct Ethernet multicast address from IPv4 multicast Address. 8< */
#define ETHER_ADDR_FOR_IPV4_MCAST(x)    \
        (rte_cpu_to_be_64(0x01005e000000ULL | ((x) & 0x7fffff)) >> 16)
/* >8 End of Construction of multicast address from IPv4 multicast address. */

/*
 * Configurable number of RX/TX ring descriptors
 */
#define RTE_TEST_RX_DESC_DEFAULT 1024
#define RTE_TEST_TX_DESC_DEFAULT 1024
static uint16_t nb_rxd = RTE_TEST_RX_DESC_DEFAULT;
static uint16_t nb_txd = RTE_TEST_TX_DESC_DEFAULT;

/* ethernet addresses of ports */
static struct rte_ether_addr ports_eth_addr[MAX_PORTS];

/* mask of enabled ports */
static uint32_t enabled_port_mask = 0;

static uint16_t nb_ports;

static int rx_queue_per_lcore = 1;

struct mbuf_table {
        uint16_t len;
        struct rte_mbuf *m_table[MAX_PKT_BURST];
};

#define MAX_RX_QUEUE_PER_LCORE 16
#define MAX_TX_QUEUE_PER_PORT 16
struct lcore_queue_conf {
        uint64_t tx_tsc;
        uint16_t n_rx_queue;
        uint8_t rx_queue_list[MAX_RX_QUEUE_PER_LCORE];
        uint16_t tx_queue_id[MAX_PORTS];
        struct mbuf_table tx_mbufs[MAX_PORTS];
} __rte_cache_aligned;
static struct lcore_queue_conf lcore_queue_conf[RTE_MAX_LCORE];

static struct rte_eth_conf port_conf = {
        .rxmode = {
                .mtu = JUMBO_FRAME_MAX_SIZE - RTE_ETHER_HDR_LEN -
                        RTE_ETHER_CRC_LEN,
                .split_hdr_size = 0,
        },
        .txmode = {
                .mq_mode = RTE_ETH_MQ_TX_NONE,
                .offloads = RTE_ETH_TX_OFFLOAD_MULTI_SEGS,
        },
};

static struct rte_mempool *packet_pool, *header_pool, *clone_pool;


/* Multicast */
static struct rte_fbk_hash_params mcast_hash_params = {
        .name = "MCAST_HASH",
        .entries = 1024,
        .entries_per_bucket = 4,
        .socket_id = 0,
        .hash_func = NULL,
        .init_val = 0,
};

struct rte_fbk_hash_table *mcast_hash = NULL;

struct mcast_group_params {
        uint32_t ip;
        uint16_t port_mask;
};

static struct mcast_group_params mcast_group_table[] = {
                {RTE_IPV4(224,0,0,101), 0x1},
                {RTE_IPV4(224,0,0,102), 0x2},
                {RTE_IPV4(224,0,0,103), 0x3},
                {RTE_IPV4(224,0,0,104), 0x4},
                {RTE_IPV4(224,0,0,105), 0x5},
                {RTE_IPV4(224,0,0,106), 0x6},
                {RTE_IPV4(224,0,0,107), 0x7},
                {RTE_IPV4(224,0,0,108), 0x8},
                {RTE_IPV4(224,0,0,109), 0x9},
                {RTE_IPV4(224,0,0,110), 0xA},
                {RTE_IPV4(224,0,0,111), 0xB},
                {RTE_IPV4(224,0,0,112), 0xC},
                {RTE_IPV4(224,0,0,113), 0xD},
                {RTE_IPV4(224,0,0,114), 0xE},
                {RTE_IPV4(224,0,0,115), 0xF},
};

/* Send burst of packets on an output interface */
static void
send_burst(struct lcore_queue_conf *qconf, uint16_t port)
{
        struct rte_mbuf **m_table;
        uint16_t n, queueid;
        int ret;

        queueid = qconf->tx_queue_id[port];
        m_table = (struct rte_mbuf **)qconf->tx_mbufs[port].m_table;
        n = qconf->tx_mbufs[port].len;

        ret = rte_eth_tx_burst(port, queueid, m_table, n);
        while (unlikely (ret < n)) {
                rte_pktmbuf_free(m_table[ret]);
                ret++;
        }

        qconf->tx_mbufs[port].len = 0;
}

/* Get number of bits set. 8< */
static inline uint32_t
bitcnt(uint32_t v)
{
        uint32_t n;

        for (n = 0; v != 0; v &= v - 1, n++)
                ;

        return n;
}
/* >8 End of getting number of bits set. */

/**
 * Create the output multicast packet based on the given input packet.
 * There are two approaches for creating outgoing packet, though both
 * are based on data zero-copy idea, they differ in few details:
 * First one creates a clone of the input packet, e.g - walk though all
 * segments of the input packet, and for each of them create a new packet
 * mbuf and attach that new mbuf to the segment (refer to rte_pktmbuf_clone()
 * for more details). Then new mbuf is allocated for the packet header
 * and is prepended to the 'clone' mbuf.
 * Second approach doesn't make a clone, it just increment refcnt for all
 * input packet segments. Then it allocates new mbuf for the packet header
 * and prepends it to the input packet.
 * Basically first approach reuses only input packet's data, but creates
 * it's own copy of packet's metadata. Second approach reuses both input's
 * packet data and metadata.
 * The advantage of first approach - is that each outgoing packet has it's
 * own copy of metadata, so we can safely modify data pointer of the
 * input packet. That allows us to skip creation if the output packet for
 * the last destination port, but instead modify input packet's header inplace,
 * e.g: for N destination ports we need to invoke mcast_out_pkt (N-1) times.
 * The advantage of second approach - less work for each outgoing packet,
 * e.g: we skip "clone" operation completely. Though it comes with a price -
 * input packet's metadata has to be intact. So for N destination ports we
 * need to invoke mcast_out_pkt N times.
 * So for small number of outgoing ports (and segments in the input packet)
 * first approach will be faster.
 * As number of outgoing ports (and/or input segments) will grow,
 * second way will become more preferable.
 *
 *  @param pkt
 *  Input packet mbuf.
 *  @param use_clone
 *  Control which of the two approaches described above should be used:
 *  - 0 - use second approach:
 *    Don't "clone" input packet.
 *    Prepend new header directly to the input packet
 *  - 1 - use first approach:
 *    Make a "clone" of input packet first.
 *    Prepend new header to the clone of the input packet
 *  @return
 *  - The pointer to the new outgoing packet.
 *  - NULL if operation failed.
 */

/* mcast_out_pkt 8< */
static inline struct rte_mbuf *
mcast_out_pkt(struct rte_mbuf *pkt, int use_clone)
{
        struct rte_mbuf *hdr;

        /* Create new mbuf for the header. */
        if (unlikely ((hdr = rte_pktmbuf_alloc(header_pool)) == NULL))
                return NULL;

        /* If requested, then make a new clone packet. */
        if (use_clone != 0 &&
            unlikely ((pkt = rte_pktmbuf_clone(pkt, clone_pool)) == NULL)) {
                rte_pktmbuf_free(hdr);
                return NULL;
        }

        /* prepend new header */
        hdr->next = pkt;

        /* update header's fields */
        hdr->pkt_len = (uint16_t)(hdr->data_len + pkt->pkt_len);
        hdr->nb_segs = pkt->nb_segs + 1;

        __rte_mbuf_sanity_check(hdr, 1);
        return hdr;
}
/* >8 End of mcast_out_kt. */

/*
 * Write new Ethernet header to the outgoing packet,
 * and put it into the outgoing queue for the given port.
 */

/* Write new Ethernet header to outgoing packets. 8< */
static inline void
mcast_send_pkt(struct rte_mbuf *pkt, struct rte_ether_addr *dest_addr,
                struct lcore_queue_conf *qconf, uint16_t port)
{
        struct rte_ether_hdr *ethdr;
        uint16_t len;

        /* Construct Ethernet header. */
        ethdr = (struct rte_ether_hdr *)
                rte_pktmbuf_prepend(pkt, (uint16_t)sizeof(*ethdr));
        RTE_ASSERT(ethdr != NULL);

        rte_ether_addr_copy(dest_addr, &ethdr->dst_addr);
        rte_ether_addr_copy(&ports_eth_addr[port], &ethdr->src_addr);
        ethdr->ether_type = rte_be_to_cpu_16(RTE_ETHER_TYPE_IPV4);

        /* Put new packet into the output queue */
        len = qconf->tx_mbufs[port].len;
        qconf->tx_mbufs[port].m_table[len] = pkt;
        qconf->tx_mbufs[port].len = ++len;

        /* Transmit packets */
        if (unlikely(MAX_PKT_BURST == len))
                send_burst(qconf, port);
}
/* >8 End of writing new Ethernet headers. */

/* Multicast forward of the input packet */
static inline void
mcast_forward(struct rte_mbuf *m, struct lcore_queue_conf *qconf)
{
        struct rte_mbuf *mc;
        struct rte_ipv4_hdr *iphdr;
        uint32_t dest_addr, port_mask, port_num, use_clone;
        int32_t hash;
        uint16_t port;
        union {
                uint64_t as_int;
                struct rte_ether_addr as_addr;
        } dst_eth_addr;

        /* Remove the Ethernet header from the input packet. 8< */
        iphdr = (struct rte_ipv4_hdr *)
                rte_pktmbuf_adj(m, (uint16_t)sizeof(struct rte_ether_hdr));
        RTE_ASSERT(iphdr != NULL);

        dest_addr = rte_be_to_cpu_32(iphdr->dst_addr);
        /* >8 End of removing the Ethernet header from the input packet. */

        /*
         * Check that it is a valid multicast address and
         * we have some active ports assigned to it.
         */

        /* Check valid multicast address. 8< */
        if (!RTE_IS_IPV4_MCAST(dest_addr) ||
            (hash = rte_fbk_hash_lookup(mcast_hash, dest_addr)) <= 0 ||
            (port_mask = hash & enabled_port_mask) == 0) {
                rte_pktmbuf_free(m);
                return;
        }
        /* >8 End of valid multicast address check. */

        /* Calculate number of destination ports. */
        port_num = bitcnt(port_mask);

        /* Should we use rte_pktmbuf_clone() or not. 8< */
        use_clone = (port_num <= MCAST_CLONE_PORTS &&
            m->nb_segs <= MCAST_CLONE_SEGS);
        /* >8 End of using rte_pktmbuf_clone(). */

        /* Mark all packet's segments as referenced port_num times */
        if (use_clone == 0)
                rte_pktmbuf_refcnt_update(m, (uint16_t)port_num);

        /* Construct destination ethernet address. 8< */
        dst_eth_addr.as_int = ETHER_ADDR_FOR_IPV4_MCAST(dest_addr);
        /* >8 End of constructing destination ethernet address. */

        /* Packets dispatched to destination ports. 8< */
        for (port = 0; use_clone != port_mask; port_mask >>= 1, port++) {

                /* Prepare output packet and send it out. */
                if ((port_mask & 1) != 0) {
                        if (likely ((mc = mcast_out_pkt(m, use_clone)) != NULL))
                                mcast_send_pkt(mc, &dst_eth_addr.as_addr,
                                                qconf, port);
                        else if (use_clone == 0)
                                rte_pktmbuf_free(m);
                }
        }
        /* >8 End of packets dispatched to destination ports. */

        /*
         * If we making clone packets, then, for the last destination port,
         * we can overwrite input packet's metadata.
         */
        if (use_clone != 0)
                mcast_send_pkt(m, &dst_eth_addr.as_addr, qconf, port);
        else
                rte_pktmbuf_free(m);
}

/* Send burst of outgoing packet, if timeout expires. */
static inline void
send_timeout_burst(struct lcore_queue_conf *qconf)
{
        uint64_t cur_tsc;
        uint16_t portid;
        const uint64_t drain_tsc = (rte_get_tsc_hz() + US_PER_S - 1) / US_PER_S * BURST_TX_DRAIN_US;

        cur_tsc = rte_rdtsc();
        if (likely (cur_tsc < qconf->tx_tsc + drain_tsc))
                return;

        for (portid = 0; portid < MAX_PORTS; portid++) {
                if (qconf->tx_mbufs[portid].len != 0)
                        send_burst(qconf, portid);
        }
        qconf->tx_tsc = cur_tsc;
}

/* main processing loop */
static int
main_loop(__rte_unused void *dummy)
{
        struct rte_mbuf *pkts_burst[MAX_PKT_BURST];
        unsigned lcore_id;
        int i, j, nb_rx;
        uint16_t portid;
        struct lcore_queue_conf *qconf;

        lcore_id = rte_lcore_id();
        qconf = &lcore_queue_conf[lcore_id];


        if (qconf->n_rx_queue == 0) {
                RTE_LOG(INFO, IPv4_MULTICAST, "lcore %u has nothing to do\n",
                    lcore_id);
                return 0;
        }

        RTE_LOG(INFO, IPv4_MULTICAST, "entering main loop on lcore %u\n",
            lcore_id);

        for (i = 0; i < qconf->n_rx_queue; i++) {

                portid = qconf->rx_queue_list[i];
                RTE_LOG(INFO, IPv4_MULTICAST, " -- lcoreid=%u portid=%d\n",
                    lcore_id, portid);
        }

        while (1) {

                /*
                 * Read packet from RX queues
                 */
                for (i = 0; i < qconf->n_rx_queue; i++) {

                        portid = qconf->rx_queue_list[i];
                        nb_rx = rte_eth_rx_burst(portid, 0, pkts_burst,
                                                 MAX_PKT_BURST);

                        /* Prefetch first packets */
                        for (j = 0; j < PREFETCH_OFFSET && j < nb_rx; j++) {
                                rte_prefetch0(rte_pktmbuf_mtod(
                                                pkts_burst[j], void *));
                        }

                        /* Prefetch and forward already prefetched packets */
                        for (j = 0; j < (nb_rx - PREFETCH_OFFSET); j++) {
                                rte_prefetch0(rte_pktmbuf_mtod(pkts_burst[
                                                j + PREFETCH_OFFSET], void *));
                                mcast_forward(pkts_burst[j], qconf);
                        }

                        /* Forward remaining prefetched packets */
                        for (; j < nb_rx; j++) {
                                mcast_forward(pkts_burst[j], qconf);
                        }
                }

                /* Send out packets from TX queues */
                send_timeout_burst(qconf);
        }
}

/* display usage */
static void
print_usage(const char *prgname)
{
        printf("%s [EAL options] -- -p PORTMASK [-q NQ]\n"
            "  -p PORTMASK: hexadecimal bitmask of ports to configure\n"
            "  -q NQ: number of queue (=ports) per lcore (default is 1)\n",
            prgname);
}

static uint32_t
parse_portmask(const char *portmask)
{
        char *end = NULL;
        unsigned long pm;

        /* parse hexadecimal string */
        pm = strtoul(portmask, &end, 16);
        if ((portmask[0] == '\0') || (end == NULL) || (*end != '\0'))
                return 0;

        return (uint32_t)pm;
}

static int
parse_nqueue(const char *q_arg)
{
        char *end = NULL;
        unsigned long n;

        /* parse numerical string */
        errno = 0;
        n = strtoul(q_arg, &end, 0);
        if (errno != 0 || end == NULL || *end != '\0' ||
                        n == 0 || n >= MAX_RX_QUEUE_PER_LCORE)
                return -1;

        return n;
}

/* Parse the argument given in the command line of the application */
static int
parse_args(int argc, char **argv)
{
        int opt, ret;
        char **argvopt;
        int option_index;
        char *prgname = argv[0];
        static struct option lgopts[] = {
                {NULL, 0, 0, 0}
        };

        argvopt = argv;

        while ((opt = getopt_long(argc, argvopt, "p:q:",
                                  lgopts, &option_index)) != EOF) {

                switch (opt) {
                /* portmask */
                case 'p':
                        enabled_port_mask = parse_portmask(optarg);
                        if (enabled_port_mask == 0) {
                                printf("invalid portmask\n");
                                print_usage(prgname);
                                return -1;
                        }
                        break;

                /* nqueue */
                case 'q':
                        rx_queue_per_lcore = parse_nqueue(optarg);
                        if (rx_queue_per_lcore < 0) {
                                printf("invalid queue number\n");
                                print_usage(prgname);
                                return -1;
                        }
                        break;

                default:
                        print_usage(prgname);
                        return -1;
                }
        }

        if (optind >= 0)
                argv[optind-1] = prgname;

        ret = optind-1;
        optind = 1; /* reset getopt lib */
        return ret;
}

static void
print_ethaddr(const char *name, struct rte_ether_addr *eth_addr)
{
        char buf[RTE_ETHER_ADDR_FMT_SIZE];
        rte_ether_format_addr(buf, RTE_ETHER_ADDR_FMT_SIZE, eth_addr);
        printf("%s%s", name, buf);
}

/* Hash object is created and loaded. 8< */
static int
init_mcast_hash(void)
{
        uint32_t i;

        mcast_hash_params.socket_id = rte_socket_id();
        mcast_hash = rte_fbk_hash_create(&mcast_hash_params);
        if (mcast_hash == NULL){
                return -1;
        }

        for (i = 0; i < RTE_DIM(mcast_group_table); i++) {
                if (rte_fbk_hash_add_key(mcast_hash,
                        mcast_group_table[i].ip,
                        mcast_group_table[i].port_mask) < 0) {
                        return -1;
                }
        }

        return 0;
}
/* >8 End of hash object is created and loaded. */

/* Check the link status of all ports in up to 9s, and print them finally */
static void
check_all_ports_link_status(uint32_t port_mask)
{
#define CHECK_INTERVAL 100 /* 100ms */
#define MAX_CHECK_TIME 90 /* 9s (90 * 100ms) in total */
        uint16_t portid;
        uint8_t count, all_ports_up, print_flag = 0;
        struct rte_eth_link link;
        int ret;
        char link_status_text[RTE_ETH_LINK_MAX_STR_LEN];

        printf("\nChecking link status");
        fflush(stdout);
        for (count = 0; count <= MAX_CHECK_TIME; count++) {
                all_ports_up = 1;
                RTE_ETH_FOREACH_DEV(portid) {
                        if ((port_mask & (1 << portid)) == 0)
                                continue;
                        memset(&link, 0, sizeof(link));
                        ret = rte_eth_link_get_nowait(portid, &link);
                        if (ret < 0) {
                                all_ports_up = 0;
                                if (print_flag == 1)
                                        printf("Port %u link get failed: %s\n",
                                                portid, rte_strerror(-ret));
                                continue;
                        }
                        /* print link status if flag set */
                        if (print_flag == 1) {
                                rte_eth_link_to_str(link_status_text,
                                        sizeof(link_status_text),
                                        &link);
                                printf("Port %d %s\n", portid,
                                       link_status_text);
                                continue;
                        }
                        /* clear all_ports_up flag if any link down */
                        if (link.link_status == RTE_ETH_LINK_DOWN) {
                                all_ports_up = 0;
                                break;
                        }
                }
                /* after finally printing all link status, get out */
                if (print_flag == 1)
                        break;

                if (all_ports_up == 0) {
                        printf(".");
                        fflush(stdout);
                        rte_delay_ms(CHECK_INTERVAL);
                }

                /* set the print_flag if all ports up or timeout */
                if (all_ports_up == 1 || count == (MAX_CHECK_TIME - 1)) {
                        print_flag = 1;
                        printf("done\n");
                }
        }
}

int
main(int argc, char **argv)
{
        struct lcore_queue_conf *qconf;
        struct rte_eth_dev_info dev_info;
        struct rte_eth_txconf *txconf;
        int ret;
        uint16_t queueid;
        unsigned lcore_id = 0, rx_lcore_id = 0;
        uint32_t n_tx_queue, nb_lcores;
        uint16_t portid;

        /* init EAL */
        ret = rte_eal_init(argc, argv);
        if (ret < 0)
                rte_exit(EXIT_FAILURE, "Invalid EAL parameters\n");
        argc -= ret;
        argv += ret;

        /* parse application arguments (after the EAL ones) */
        ret = parse_args(argc, argv);
        if (ret < 0)
                rte_exit(EXIT_FAILURE, "Invalid IPV4_MULTICAST parameters\n");

        /* Create the mbuf pools. 8< */
        packet_pool = rte_pktmbuf_pool_create("packet_pool", NB_PKT_MBUF, 32,
                0, PKT_MBUF_DATA_SIZE, rte_socket_id());

        if (packet_pool == NULL)
                rte_exit(EXIT_FAILURE, "Cannot init packet mbuf pool\n");

        header_pool = rte_pktmbuf_pool_create("header_pool", NB_HDR_MBUF, 32,
                0, HDR_MBUF_DATA_SIZE, rte_socket_id());

        if (header_pool == NULL)
                rte_exit(EXIT_FAILURE, "Cannot init header mbuf pool\n");

        clone_pool = rte_pktmbuf_pool_create("clone_pool", NB_CLONE_MBUF, 32,
                0, 0, rte_socket_id());

        if (clone_pool == NULL)
                rte_exit(EXIT_FAILURE, "Cannot init clone mbuf pool\n");
        /* >8 End of create mbuf pools. */

        nb_ports = rte_eth_dev_count_avail();
        if (nb_ports == 0)
                rte_exit(EXIT_FAILURE, "No physical ports!\n");
        if (nb_ports > MAX_PORTS)
                nb_ports = MAX_PORTS;

        nb_lcores = rte_lcore_count();

        /* initialize all ports */
        RTE_ETH_FOREACH_DEV(portid) {
                struct rte_eth_rxconf rxq_conf;
                struct rte_eth_conf local_port_conf = port_conf;

                /* skip ports that are not enabled */
                if ((enabled_port_mask & (1 << portid)) == 0) {
                        printf("Skipping disabled port %d\n", portid);
                        continue;
                }

                qconf = &lcore_queue_conf[rx_lcore_id];

                /* limit the frame size to the maximum supported by NIC */
                ret = rte_eth_dev_info_get(portid, &dev_info);
                if (ret != 0)
                        rte_exit(EXIT_FAILURE,
                                "Error during getting device (port %u) info: %s\n",
                                portid, strerror(-ret));

                local_port_conf.rxmode.mtu = RTE_MIN(
                    dev_info.max_mtu,
                    local_port_conf.rxmode.mtu);

                /* get the lcore_id for this port */
                while (rte_lcore_is_enabled(rx_lcore_id) == 0 ||
                       qconf->n_rx_queue == (unsigned)rx_queue_per_lcore) {

                        rx_lcore_id ++;
                        qconf = &lcore_queue_conf[rx_lcore_id];

                        if (rx_lcore_id >= RTE_MAX_LCORE)
                                rte_exit(EXIT_FAILURE, "Not enough cores\n");
                }
                qconf->rx_queue_list[qconf->n_rx_queue] = portid;
                qconf->n_rx_queue++;

                /* init port */
                printf("Initializing port %d on lcore %u... ", portid,
                       rx_lcore_id);
                fflush(stdout);

                n_tx_queue = nb_lcores;
                if (n_tx_queue > MAX_TX_QUEUE_PER_PORT)
                        n_tx_queue = MAX_TX_QUEUE_PER_PORT;

                ret = rte_eth_dev_configure(portid, 1, (uint16_t)n_tx_queue,
                                            &local_port_conf);
                if (ret < 0)
                        rte_exit(EXIT_FAILURE, "Cannot configure device: err=%d, port=%d\n",
                                  ret, portid);

                ret = rte_eth_dev_adjust_nb_rx_tx_desc(portid, &nb_rxd,
                                                       &nb_txd);
                if (ret < 0)
                        rte_exit(EXIT_FAILURE,
                                 "Cannot adjust number of descriptors: err=%d, port=%d\n",
                                 ret, portid);

                ret = rte_eth_macaddr_get(portid, &ports_eth_addr[portid]);
                if (ret < 0)
                        rte_exit(EXIT_FAILURE,
                                 "Cannot get MAC address: err=%d, port=%d\n",
                                 ret, portid);

                print_ethaddr(" Address:", &ports_eth_addr[portid]);
                printf(", ");

                /* init one RX queue */
                queueid = 0;
                printf("rxq=%hu ", queueid);
                fflush(stdout);
                rxq_conf = dev_info.default_rxconf;
                rxq_conf.offloads = local_port_conf.rxmode.offloads;
                ret = rte_eth_rx_queue_setup(portid, queueid, nb_rxd,
                                             rte_eth_dev_socket_id(portid),
                                             &rxq_conf,
                                             packet_pool);
                if (ret < 0)
                        rte_exit(EXIT_FAILURE, "rte_eth_tx_queue_setup: err=%d, port=%d\n",
                                  ret, portid);

                /* init one TX queue per couple (lcore,port) */
                queueid = 0;

                RTE_LCORE_FOREACH(lcore_id) {
                        if (rte_lcore_is_enabled(lcore_id) == 0)
                                continue;
                        printf("txq=%u,%hu ", lcore_id, queueid);
                        fflush(stdout);

                        txconf = &dev_info.default_txconf;
                        txconf->offloads = local_port_conf.txmode.offloads;
                        ret = rte_eth_tx_queue_setup(portid, queueid, nb_txd,
                                                     rte_lcore_to_socket_id(lcore_id), txconf);
                        if (ret < 0)
                                rte_exit(EXIT_FAILURE, "rte_eth_tx_queue_setup: err=%d, "
                                          "port=%d\n", ret, portid);

                        qconf = &lcore_queue_conf[lcore_id];
                        qconf->tx_queue_id[portid] = queueid;
                        queueid++;
                }
                ret = rte_eth_allmulticast_enable(portid);
                if (ret < 0)
                        rte_exit(EXIT_FAILURE,
                                "rte_eth_allmulticast_enable: err=%d, port=%d\n",
                                ret, portid);
                /* Start device */
                ret = rte_eth_dev_start(portid);
                if (ret < 0)
                        rte_exit(EXIT_FAILURE, "rte_eth_dev_start: err=%d, port=%d\n",
                                  ret, portid);

                printf("done:\n");
        }

        check_all_ports_link_status(enabled_port_mask);

        /* initialize the multicast hash */
        int retval = init_mcast_hash();
        if (retval != 0)
                rte_exit(EXIT_FAILURE, "Cannot build the multicast hash\n");

        /* launch per-lcore init on every lcore */
        rte_eal_mp_remote_launch(main_loop, NULL, CALL_MAIN);
        RTE_LCORE_FOREACH_WORKER(lcore_id) {
                if (rte_eal_wait_lcore(lcore_id) < 0)
                        return -1;
        }

        /* clean up the EAL */
        rte_eal_cleanup();

        return 0;
}