LXR iproute2/include/uapi/linux/can/netlink.h

   1/* SPDX-License-Identifier: GPL-2.0-only WITH Linux-syscall-note */
   2/*
   3 * linux/can/netlink.h
   4 *
   5 * Definitions for the CAN netlink interface
   6 *
   7 * Copyright (c) 2009 Wolfgang Grandegger <wg@grandegger.com>
   8 *
   9 * This program is free software; you can redistribute it and/or modify
  10 * it under the terms of the version 2 of the GNU General Public License
  11 * as published by the Free Software Foundation
  12 *
  13 * This program is distributed in the hope that it will be useful,
  14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  16 * GNU General Public License for more details.
  17 */
  18
  19#ifndef _CAN_NETLINK_H
  20#define _CAN_NETLINK_H
  21
  22#include <linux/types.h>
  23
  24/*
  25 * CAN bit-timing parameters
  26 *
  27 * For further information, please read chapter "8 BIT TIMING
  28 * REQUIREMENTS" of the "Bosch CAN Specification version 2.0"
  29 * at http://www.semiconductors.bosch.de/pdf/can2spec.pdf.
  30 */
  31struct can_bittiming {
  32        __u32 bitrate;          /* Bit-rate in bits/second */
  33        __u32 sample_point;     /* Sample point in one-tenth of a percent */
  34        __u32 tq;               /* Time quanta (TQ) in nanoseconds */
  35        __u32 prop_seg;         /* Propagation segment in TQs */
  36        __u32 phase_seg1;       /* Phase buffer segment 1 in TQs */
  37        __u32 phase_seg2;       /* Phase buffer segment 2 in TQs */
  38        __u32 sjw;              /* Synchronisation jump width in TQs */
  39        __u32 brp;              /* Bit-rate prescaler */
  40};
  41
  42/*
  43 * CAN hardware-dependent bit-timing constant
  44 *
  45 * Used for calculating and checking bit-timing parameters
  46 */
  47struct can_bittiming_const {
  48        char name[16];          /* Name of the CAN controller hardware */
  49        __u32 tseg1_min;        /* Time segment 1 = prop_seg + phase_seg1 */
  50        __u32 tseg1_max;
  51        __u32 tseg2_min;        /* Time segment 2 = phase_seg2 */
  52        __u32 tseg2_max;
  53        __u32 sjw_max;          /* Synchronisation jump width */
  54        __u32 brp_min;          /* Bit-rate prescaler */
  55        __u32 brp_max;
  56        __u32 brp_inc;
  57};
  58
  59/*
  60 * CAN clock parameters
  61 */
  62struct can_clock {
  63        __u32 freq;             /* CAN system clock frequency in Hz */
  64};
  65
  66/*
  67 * CAN operational and error states
  68 */
  69enum can_state {
  70        CAN_STATE_ERROR_ACTIVE = 0,     /* RX/TX error count < 96 */
  71        CAN_STATE_ERROR_WARNING,        /* RX/TX error count < 128 */
  72        CAN_STATE_ERROR_PASSIVE,        /* RX/TX error count < 256 */
  73        CAN_STATE_BUS_OFF,              /* RX/TX error count >= 256 */
  74        CAN_STATE_STOPPED,              /* Device is stopped */
  75        CAN_STATE_SLEEPING,             /* Device is sleeping */
  76        CAN_STATE_MAX
  77};
  78
  79/*
  80 * CAN bus error counters
  81 */
  82struct can_berr_counter {
  83        __u16 txerr;
  84        __u16 rxerr;
  85};
  86
  87/*
  88 * CAN controller mode
  89 */
  90struct can_ctrlmode {
  91        __u32 mask;
  92        __u32 flags;
  93};
  94
  95#define CAN_CTRLMODE_LOOPBACK           0x01    /* Loopback mode */
  96#define CAN_CTRLMODE_LISTENONLY         0x02    /* Listen-only mode */
  97#define CAN_CTRLMODE_3_SAMPLES          0x04    /* Triple sampling mode */
  98#define CAN_CTRLMODE_ONE_SHOT           0x08    /* One-Shot mode */
  99#define CAN_CTRLMODE_BERR_REPORTING     0x10    /* Bus-error reporting */
 100#define CAN_CTRLMODE_FD                 0x20    /* CAN FD mode */
 101#define CAN_CTRLMODE_PRESUME_ACK        0x40    /* Ignore missing CAN ACKs */
 102#define CAN_CTRLMODE_FD_NON_ISO         0x80    /* CAN FD in non-ISO mode */
 103#define CAN_CTRLMODE_CC_LEN8_DLC        0x100   /* Classic CAN DLC option */
 104
 105/*
 106 * CAN device statistics
 107 */
 108struct can_device_stats {
 109        __u32 bus_error;        /* Bus errors */
 110        __u32 error_warning;    /* Changes to error warning state */
 111        __u32 error_passive;    /* Changes to error passive state */
 112        __u32 bus_off;          /* Changes to bus off state */
 113        __u32 arbitration_lost; /* Arbitration lost errors */
 114        __u32 restarts;         /* CAN controller re-starts */
 115};
 116
 117/*
 118 * CAN netlink interface
 119 */
 120enum {
 121        IFLA_CAN_UNSPEC,
 122        IFLA_CAN_BITTIMING,
 123        IFLA_CAN_BITTIMING_CONST,
 124        IFLA_CAN_CLOCK,
 125        IFLA_CAN_STATE,
 126        IFLA_CAN_CTRLMODE,
 127        IFLA_CAN_RESTART_MS,
 128        IFLA_CAN_RESTART,
 129        IFLA_CAN_BERR_COUNTER,
 130        IFLA_CAN_DATA_BITTIMING,
 131        IFLA_CAN_DATA_BITTIMING_CONST,
 132        IFLA_CAN_TERMINATION,
 133        IFLA_CAN_TERMINATION_CONST,
 134        IFLA_CAN_BITRATE_CONST,
 135        IFLA_CAN_DATA_BITRATE_CONST,
 136        IFLA_CAN_BITRATE_MAX,
 137        __IFLA_CAN_MAX
 138};
 139
 140#define IFLA_CAN_MAX    (__IFLA_CAN_MAX - 1)
 141
 142/* u16 termination range: 1..65535 Ohms */
 143#define CAN_TERMINATION_DISABLED 0
 144
 145#endif /* !_UAPI_CAN_NETLINK_H */
 146