/*
 * Copyright (C) 2001 David J. Mckay (david.mckay@st.com)
 * Copyright (C) 2003, 2004 Paul Mundt
 * Copyright (C) 2004 Richard Curnow
 *
 * May be copied or modified under the terms of the GNU General Public
 * License.  See linux/COPYING for more information.
 *
 * Support functions for the SH5 PCI hardware.
 */

#include <linux/kernel.h>
#include <linux/rwsem.h>
#include <linux/smp.h>
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/types.h>
#include <linux/irq.h>
#include <cpu/irq.h>
#include <asm/pci.h>
#include <asm/io.h>
#include "pci-sh5.h"

unsigned long pcicr_virt;
unsigned long PCI_IO_AREA;

/* Rounds a number UP to the nearest power of two. Used for
 * sizing the PCI window.
 */
static u32 __init r2p2(u32 num)
{
        int i = 31;
        u32 tmp = num;

        if (num == 0)
                return 0;

        do {
                if (tmp & (1 << 31))
                        break;
                i--;
                tmp <<= 1;
        } while (i >= 0);

        tmp = 1 << i;
        /* If the original number isn't a power of 2, round it up */
        if (tmp != num)
                tmp <<= 1;

        return tmp;
}

static irqreturn_t pcish5_err_irq(int irq, void *dev_id)
{
        struct pt_regs *regs = get_irq_regs();
        unsigned pci_int, pci_air, pci_cir, pci_aint;

        pci_int = SH5PCI_READ(INT);
        pci_cir = SH5PCI_READ(CIR);
        pci_air = SH5PCI_READ(AIR);

        if (pci_int) {
                printk("PCI INTERRUPT (at %08llx)!\n", regs->pc);
                printk("PCI INT -> 0x%x\n", pci_int & 0xffff);
                printk("PCI AIR -> 0x%x\n", pci_air);
                printk("PCI CIR -> 0x%x\n", pci_cir);
                SH5PCI_WRITE(INT, ~0);
        }

        pci_aint = SH5PCI_READ(AINT);
        if (pci_aint) {
                printk("PCI ARB INTERRUPT!\n");
                printk("PCI AINT -> 0x%x\n", pci_aint);
                printk("PCI AIR -> 0x%x\n", pci_air);
                printk("PCI CIR -> 0x%x\n", pci_cir);
                SH5PCI_WRITE(AINT, ~0);
        }

        return IRQ_HANDLED;
}

static irqreturn_t pcish5_serr_irq(int irq, void *dev_id)
{
        printk("SERR IRQ\n");

        return IRQ_NONE;
}

static struct resource sh5_pci_resources[2];

static struct pci_channel sh5pci_controller = {
        .pci_ops                = &sh5_pci_ops,
        .resources              = sh5_pci_resources,
        .nr_resources           = ARRAY_SIZE(sh5_pci_resources),
        .mem_offset             = 0x00000000,
        .io_offset              = 0x00000000,
};

static int __init sh5pci_init(void)
{
        unsigned long memStart = __pa(memory_start);
        unsigned long memSize = __pa(memory_end) - memStart;
        u32 lsr0;
        u32 uval;

        if (request_irq(IRQ_ERR, pcish5_err_irq,
                        0, "PCI Error",NULL) < 0) {
                printk(KERN_ERR "PCISH5: Cannot hook PCI_PERR interrupt\n");
                return -EINVAL;
        }

        if (request_irq(IRQ_SERR, pcish5_serr_irq,
                        0, "PCI SERR interrupt", NULL) < 0) {
                printk(KERN_ERR "PCISH5: Cannot hook PCI_SERR interrupt\n");
                return -EINVAL;
        }

        pcicr_virt = (unsigned long)ioremap_nocache(SH5PCI_ICR_BASE, 1024);
        if (!pcicr_virt) {
                panic("Unable to remap PCICR\n");
        }

        PCI_IO_AREA = (unsigned long)ioremap_nocache(SH5PCI_IO_BASE, 0x10000);
        if (!PCI_IO_AREA) {
                panic("Unable to remap PCIIO\n");
        }

        /* Clear snoop registers */
        SH5PCI_WRITE(CSCR0, 0);
        SH5PCI_WRITE(CSCR1, 0);

        /* Switch off interrupts */
        SH5PCI_WRITE(INTM,  0);
        SH5PCI_WRITE(AINTM, 0);
        SH5PCI_WRITE(PINTM, 0);

        /* Set bus active, take it out of reset */
        uval = SH5PCI_READ(CR);

        /* Set command Register */
        SH5PCI_WRITE(CR, uval | CR_LOCK_MASK | CR_CFINT| CR_FTO | CR_PFE |
                     CR_PFCS | CR_BMAM);

        uval=SH5PCI_READ(CR);

        /* Allow it to be a master */
        /* NB - WE DISABLE I/O ACCESS to stop overlap */
        /* set WAIT bit to enable stepping, an attempt to improve stability */
        SH5PCI_WRITE_SHORT(CSR_CMD,
                            PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER |
                            PCI_COMMAND_WAIT);

        /*
        ** Set translation mapping memory in order to convert the address
        ** used for the main bus, to the PCI internal address.
        */
        SH5PCI_WRITE(MBR,0x40000000);

        /* Always set the max size 512M */
        SH5PCI_WRITE(MBMR, PCISH5_MEM_SIZCONV(512*1024*1024));

        /*
        ** I/O addresses are mapped at internal PCI specific address
        ** as is described into the configuration bridge table.
        ** These are changed to 0, to allow cards that have legacy
        ** io such as vga to function correctly. We set the SH5 IOBAR to
        ** 256K, which is a bit big as we can only have 64K of address space
        */

        SH5PCI_WRITE(IOBR,0x0);

        /* Set up a 256K window. Totally pointless waste  of address space */
        SH5PCI_WRITE(IOBMR,0);

        /* The SH5 has a HUGE 256K I/O region, which breaks the PCI spec.
         * Ideally, we would want to map the I/O region somewhere, but it
         * is so big this is not that easy!
         */
        SH5PCI_WRITE(CSR_IBAR0,~0);
        /* Set memory size value */
        memSize = memory_end - memory_start;

        /* Now we set up the mbars so the PCI bus can see the memory of
         * the machine */
        if (memSize < (1024 * 1024)) {
                printk(KERN_ERR "PCISH5: Ridiculous memory size of 0x%lx?\n",
                       memSize);
                return -EINVAL;
        }

        /* Set LSR 0 */
        lsr0 = (memSize > (512 * 1024 * 1024)) ? 0x1ff00001 :
                ((r2p2(memSize) - 0x100000) | 0x1);
        SH5PCI_WRITE(LSR0, lsr0);

        /* Set MBAR 0 */
        SH5PCI_WRITE(CSR_MBAR0, memory_start);
        SH5PCI_WRITE(LAR0, memory_start);

        SH5PCI_WRITE(CSR_MBAR1,0);
        SH5PCI_WRITE(LAR1,0);
        SH5PCI_WRITE(LSR1,0);

        /* Enable the PCI interrupts on the device */
        SH5PCI_WRITE(INTM,  ~0);
        SH5PCI_WRITE(AINTM, ~0);
        SH5PCI_WRITE(PINTM, ~0);

        sh5_pci_resources[0].start = PCI_IO_AREA;
        sh5_pci_resources[0].end = PCI_IO_AREA + 0x10000;

        sh5_pci_resources[1].start = memStart;
        sh5_pci_resources[1].end = memStart + memSize;

        return register_pci_controller(&sh5pci_controller);
}
arch_initcall(sh5pci_init);