linux/drivers/misc/mei/hw.h
<<
>>
Prefs
   1/*
   2 *
   3 * Intel Management Engine Interface (Intel MEI) Linux driver
   4 * Copyright (c) 2003-2012, Intel Corporation.
   5 *
   6 * This program is free software; you can redistribute it and/or modify it
   7 * under the terms and conditions of the GNU General Public License,
   8 * version 2, as published by the Free Software Foundation.
   9 *
  10 * This program is distributed in the hope it will be useful, but WITHOUT
  11 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  12 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  13 * more details.
  14 *
  15 */
  16
  17#ifndef _MEI_HW_TYPES_H_
  18#define _MEI_HW_TYPES_H_
  19
  20#include <linux/uuid.h>
  21
  22/*
  23 * Timeouts in Seconds
  24 */
  25#define MEI_HW_READY_TIMEOUT        2  /* Timeout on ready message */
  26#define MEI_CONNECT_TIMEOUT         3  /* HPS: at least 2 seconds */
  27
  28#define MEI_CL_CONNECT_TIMEOUT     15  /* HPS: Client Connect Timeout */
  29#define MEI_CLIENTS_INIT_TIMEOUT   15  /* HPS: Clients Enumeration Timeout */
  30
  31#define MEI_IAMTHIF_STALL_TIMER    12  /* HPS */
  32
  33#define MEI_PGI_TIMEOUT             1  /* PG Isolation time response 1 sec */
  34#define MEI_D0I3_TIMEOUT            5  /* D0i3 set/unset max response time */
  35#define MEI_HBM_TIMEOUT             1  /* 1 second */
  36
  37/*
  38 * MEI Version
  39 */
  40#define HBM_MINOR_VERSION                   0
  41#define HBM_MAJOR_VERSION                   2
  42
  43/*
  44 * MEI version with PGI support
  45 */
  46#define HBM_MINOR_VERSION_PGI               1
  47#define HBM_MAJOR_VERSION_PGI               1
  48
  49/*
  50 * MEI version with Dynamic clients support
  51 */
  52#define HBM_MINOR_VERSION_DC               0
  53#define HBM_MAJOR_VERSION_DC               2
  54
  55/*
  56 * MEI version with immediate reply to enum request support
  57 */
  58#define HBM_MINOR_VERSION_IE               0
  59#define HBM_MAJOR_VERSION_IE               2
  60
  61/*
  62 * MEI version with disconnect on connection timeout support
  63 */
  64#define HBM_MINOR_VERSION_DOT              0
  65#define HBM_MAJOR_VERSION_DOT              2
  66
  67/*
  68 * MEI version with notification support
  69 */
  70#define HBM_MINOR_VERSION_EV               0
  71#define HBM_MAJOR_VERSION_EV               2
  72
  73/*
  74 * MEI version with fixed address client support
  75 */
  76#define HBM_MINOR_VERSION_FA               0
  77#define HBM_MAJOR_VERSION_FA               2
  78
  79/*
  80 * MEI version with OS ver message support
  81 */
  82#define HBM_MINOR_VERSION_OS               0
  83#define HBM_MAJOR_VERSION_OS               2
  84
  85/* Host bus message command opcode */
  86#define MEI_HBM_CMD_OP_MSK                  0x7f
  87/* Host bus message command RESPONSE */
  88#define MEI_HBM_CMD_RES_MSK                 0x80
  89
  90/*
  91 * MEI Bus Message Command IDs
  92 */
  93#define HOST_START_REQ_CMD                  0x01
  94#define HOST_START_RES_CMD                  0x81
  95
  96#define HOST_STOP_REQ_CMD                   0x02
  97#define HOST_STOP_RES_CMD                   0x82
  98
  99#define ME_STOP_REQ_CMD                     0x03
 100
 101#define HOST_ENUM_REQ_CMD                   0x04
 102#define HOST_ENUM_RES_CMD                   0x84
 103
 104#define HOST_CLIENT_PROPERTIES_REQ_CMD      0x05
 105#define HOST_CLIENT_PROPERTIES_RES_CMD      0x85
 106
 107#define CLIENT_CONNECT_REQ_CMD              0x06
 108#define CLIENT_CONNECT_RES_CMD              0x86
 109
 110#define CLIENT_DISCONNECT_REQ_CMD           0x07
 111#define CLIENT_DISCONNECT_RES_CMD           0x87
 112
 113#define MEI_FLOW_CONTROL_CMD                0x08
 114
 115#define MEI_PG_ISOLATION_ENTRY_REQ_CMD      0x0a
 116#define MEI_PG_ISOLATION_ENTRY_RES_CMD      0x8a
 117#define MEI_PG_ISOLATION_EXIT_REQ_CMD       0x0b
 118#define MEI_PG_ISOLATION_EXIT_RES_CMD       0x8b
 119
 120#define MEI_HBM_ADD_CLIENT_REQ_CMD          0x0f
 121#define MEI_HBM_ADD_CLIENT_RES_CMD          0x8f
 122
 123#define MEI_HBM_NOTIFY_REQ_CMD              0x10
 124#define MEI_HBM_NOTIFY_RES_CMD              0x90
 125#define MEI_HBM_NOTIFICATION_CMD            0x11
 126
 127/*
 128 * MEI Stop Reason
 129 * used by hbm_host_stop_request.reason
 130 */
 131enum mei_stop_reason_types {
 132        DRIVER_STOP_REQUEST = 0x00,
 133        DEVICE_D1_ENTRY = 0x01,
 134        DEVICE_D2_ENTRY = 0x02,
 135        DEVICE_D3_ENTRY = 0x03,
 136        SYSTEM_S1_ENTRY = 0x04,
 137        SYSTEM_S2_ENTRY = 0x05,
 138        SYSTEM_S3_ENTRY = 0x06,
 139        SYSTEM_S4_ENTRY = 0x07,
 140        SYSTEM_S5_ENTRY = 0x08
 141};
 142
 143
 144/**
 145 * enum mei_hbm_status  - mei host bus messages return values
 146 *
 147 * @MEI_HBMS_SUCCESS           : status success
 148 * @MEI_HBMS_CLIENT_NOT_FOUND  : client not found
 149 * @MEI_HBMS_ALREADY_EXISTS    : connection already established
 150 * @MEI_HBMS_REJECTED          : connection is rejected
 151 * @MEI_HBMS_INVALID_PARAMETER : invalid parameter
 152 * @MEI_HBMS_NOT_ALLOWED       : operation not allowed
 153 * @MEI_HBMS_ALREADY_STARTED   : system is already started
 154 * @MEI_HBMS_NOT_STARTED       : system not started
 155 *
 156 * @MEI_HBMS_MAX               : sentinel
 157 */
 158enum mei_hbm_status {
 159        MEI_HBMS_SUCCESS           = 0,
 160        MEI_HBMS_CLIENT_NOT_FOUND  = 1,
 161        MEI_HBMS_ALREADY_EXISTS    = 2,
 162        MEI_HBMS_REJECTED          = 3,
 163        MEI_HBMS_INVALID_PARAMETER = 4,
 164        MEI_HBMS_NOT_ALLOWED       = 5,
 165        MEI_HBMS_ALREADY_STARTED   = 6,
 166        MEI_HBMS_NOT_STARTED       = 7,
 167
 168        MEI_HBMS_MAX
 169};
 170
 171
 172/*
 173 * Client Connect Status
 174 * used by hbm_client_connect_response.status
 175 */
 176enum mei_cl_connect_status {
 177        MEI_CL_CONN_SUCCESS          = MEI_HBMS_SUCCESS,
 178        MEI_CL_CONN_NOT_FOUND        = MEI_HBMS_CLIENT_NOT_FOUND,
 179        MEI_CL_CONN_ALREADY_STARTED  = MEI_HBMS_ALREADY_EXISTS,
 180        MEI_CL_CONN_OUT_OF_RESOURCES = MEI_HBMS_REJECTED,
 181        MEI_CL_CONN_MESSAGE_SMALL    = MEI_HBMS_INVALID_PARAMETER,
 182        MEI_CL_CONN_NOT_ALLOWED      = MEI_HBMS_NOT_ALLOWED,
 183};
 184
 185/*
 186 * Client Disconnect Status
 187 */
 188enum  mei_cl_disconnect_status {
 189        MEI_CL_DISCONN_SUCCESS = MEI_HBMS_SUCCESS
 190};
 191
 192/*
 193 *  MEI BUS Interface Section
 194 */
 195struct mei_msg_hdr {
 196        u32 me_addr:8;
 197        u32 host_addr:8;
 198        u32 length:9;
 199        u32 reserved:5;
 200        u32 internal:1;
 201        u32 msg_complete:1;
 202} __packed;
 203
 204
 205struct mei_bus_message {
 206        u8 hbm_cmd;
 207        u8 data[0];
 208} __packed;
 209
 210/**
 211 * struct hbm_cl_cmd - client specific host bus command
 212 *      CONNECT, DISCONNECT, and FlOW CONTROL
 213 *
 214 * @hbm_cmd: bus message command header
 215 * @me_addr: address of the client in ME
 216 * @host_addr: address of the client in the driver
 217 * @data: generic data
 218 */
 219struct mei_hbm_cl_cmd {
 220        u8 hbm_cmd;
 221        u8 me_addr;
 222        u8 host_addr;
 223        u8 data;
 224};
 225
 226struct hbm_version {
 227        u8 minor_version;
 228        u8 major_version;
 229} __packed;
 230
 231struct hbm_host_version_request {
 232        u8 hbm_cmd;
 233        u8 reserved;
 234        struct hbm_version host_version;
 235} __packed;
 236
 237struct hbm_host_version_response {
 238        u8 hbm_cmd;
 239        u8 host_version_supported;
 240        struct hbm_version me_max_version;
 241} __packed;
 242
 243struct hbm_host_stop_request {
 244        u8 hbm_cmd;
 245        u8 reason;
 246        u8 reserved[2];
 247} __packed;
 248
 249struct hbm_host_stop_response {
 250        u8 hbm_cmd;
 251        u8 reserved[3];
 252} __packed;
 253
 254struct hbm_me_stop_request {
 255        u8 hbm_cmd;
 256        u8 reason;
 257        u8 reserved[2];
 258} __packed;
 259
 260/**
 261 * enum hbm_host_enum_flags - enumeration request flags (HBM version >= 2.0)
 262 *
 263 * @MEI_HBM_ENUM_F_ALLOW_ADD: allow dynamic clients add
 264 * @MEI_HBM_ENUM_F_IMMEDIATE_ENUM: allow FW to send answer immediately
 265 */
 266enum hbm_host_enum_flags {
 267        MEI_HBM_ENUM_F_ALLOW_ADD = BIT(0),
 268        MEI_HBM_ENUM_F_IMMEDIATE_ENUM = BIT(1),
 269};
 270
 271/**
 272 * struct hbm_host_enum_request - enumeration request from host to fw
 273 *
 274 * @hbm_cmd : bus message command header
 275 * @flags   : request flags
 276 * @reserved: reserved
 277 */
 278struct hbm_host_enum_request {
 279        u8 hbm_cmd;
 280        u8 flags;
 281        u8 reserved[2];
 282} __packed;
 283
 284struct hbm_host_enum_response {
 285        u8 hbm_cmd;
 286        u8 reserved[3];
 287        u8 valid_addresses[32];
 288} __packed;
 289
 290struct mei_client_properties {
 291        uuid_le protocol_name;
 292        u8 protocol_version;
 293        u8 max_number_of_connections;
 294        u8 fixed_address;
 295        u8 single_recv_buf;
 296        u32 max_msg_length;
 297} __packed;
 298
 299struct hbm_props_request {
 300        u8 hbm_cmd;
 301        u8 me_addr;
 302        u8 reserved[2];
 303} __packed;
 304
 305struct hbm_props_response {
 306        u8 hbm_cmd;
 307        u8 me_addr;
 308        u8 status;
 309        u8 reserved[1];
 310        struct mei_client_properties client_properties;
 311} __packed;
 312
 313/**
 314 * struct hbm_add_client_request - request to add a client
 315 *     might be sent by fw after enumeration has already completed
 316 *
 317 * @hbm_cmd: bus message command header
 318 * @me_addr: address of the client in ME
 319 * @reserved: reserved
 320 * @client_properties: client properties
 321 */
 322struct hbm_add_client_request {
 323        u8 hbm_cmd;
 324        u8 me_addr;
 325        u8 reserved[2];
 326        struct mei_client_properties client_properties;
 327} __packed;
 328
 329/**
 330 * struct hbm_add_client_response - response to add a client
 331 *     sent by the host to report client addition status to fw
 332 *
 333 * @hbm_cmd: bus message command header
 334 * @me_addr: address of the client in ME
 335 * @status: if HBMS_SUCCESS then the client can now accept connections.
 336 * @reserved: reserved
 337 */
 338struct hbm_add_client_response {
 339        u8 hbm_cmd;
 340        u8 me_addr;
 341        u8 status;
 342        u8 reserved[1];
 343} __packed;
 344
 345/**
 346 * struct hbm_power_gate - power gate request/response
 347 *
 348 * @hbm_cmd: bus message command header
 349 * @reserved: reserved
 350 */
 351struct hbm_power_gate {
 352        u8 hbm_cmd;
 353        u8 reserved[3];
 354} __packed;
 355
 356/**
 357 * struct hbm_client_connect_request - connect/disconnect request
 358 *
 359 * @hbm_cmd: bus message command header
 360 * @me_addr: address of the client in ME
 361 * @host_addr: address of the client in the driver
 362 * @reserved: reserved
 363 */
 364struct hbm_client_connect_request {
 365        u8 hbm_cmd;
 366        u8 me_addr;
 367        u8 host_addr;
 368        u8 reserved;
 369} __packed;
 370
 371/**
 372 * struct hbm_client_connect_response - connect/disconnect response
 373 *
 374 * @hbm_cmd: bus message command header
 375 * @me_addr: address of the client in ME
 376 * @host_addr: address of the client in the driver
 377 * @status: status of the request
 378 */
 379struct hbm_client_connect_response {
 380        u8 hbm_cmd;
 381        u8 me_addr;
 382        u8 host_addr;
 383        u8 status;
 384} __packed;
 385
 386
 387#define MEI_FC_MESSAGE_RESERVED_LENGTH           5
 388
 389struct hbm_flow_control {
 390        u8 hbm_cmd;
 391        u8 me_addr;
 392        u8 host_addr;
 393        u8 reserved[MEI_FC_MESSAGE_RESERVED_LENGTH];
 394} __packed;
 395
 396#define MEI_HBM_NOTIFICATION_START 1
 397#define MEI_HBM_NOTIFICATION_STOP  0
 398/**
 399 * struct hbm_notification_request - start/stop notification request
 400 *
 401 * @hbm_cmd: bus message command header
 402 * @me_addr: address of the client in ME
 403 * @host_addr: address of the client in the driver
 404 * @start:  start = 1 or stop = 0 asynchronous notifications
 405 */
 406struct hbm_notification_request {
 407        u8 hbm_cmd;
 408        u8 me_addr;
 409        u8 host_addr;
 410        u8 start;
 411} __packed;
 412
 413/**
 414 * struct hbm_notification_response - start/stop notification response
 415 *
 416 * @hbm_cmd: bus message command header
 417 * @me_addr: address of the client in ME
 418 * @host_addr: - address of the client in the driver
 419 * @status: (mei_hbm_status) response status for the request
 420 *  - MEI_HBMS_SUCCESS: successful stop/start
 421 *  - MEI_HBMS_CLIENT_NOT_FOUND: if the connection could not be found.
 422 *  - MEI_HBMS_ALREADY_STARTED: for start requests for a previously
 423 *                         started notification.
 424 *  - MEI_HBMS_NOT_STARTED: for stop request for a connected client for whom
 425 *                         asynchronous notifications are currently disabled.
 426 *
 427 * @start:  start = 1 or stop = 0 asynchronous notifications
 428 * @reserved: reserved
 429 */
 430struct hbm_notification_response {
 431        u8 hbm_cmd;
 432        u8 me_addr;
 433        u8 host_addr;
 434        u8 status;
 435        u8 start;
 436        u8 reserved[3];
 437} __packed;
 438
 439/**
 440 * struct hbm_notification - notification event
 441 *
 442 * @hbm_cmd: bus message command header
 443 * @me_addr:  address of the client in ME
 444 * @host_addr:  address of the client in the driver
 445 * @reserved: reserved for alignment
 446 */
 447struct hbm_notification {
 448        u8 hbm_cmd;
 449        u8 me_addr;
 450        u8 host_addr;
 451        u8 reserved[1];
 452} __packed;
 453
 454#endif
 455