linux/drivers/net/ethernet/smsc/smc911x.c
<<
>>
Prefs
   1/*
   2 * smc911x.c
   3 * This is a driver for SMSC's LAN911{5,6,7,8} single-chip Ethernet devices.
   4 *
   5 * Copyright (C) 2005 Sensoria Corp
   6 *         Derived from the unified SMC91x driver by Nicolas Pitre
   7 *         and the smsc911x.c reference driver by SMSC
   8 *
   9 * This program is free software; you can redistribute it and/or modify
  10 * it under the terms of the GNU General Public License as published by
  11 * the Free Software Foundation; either version 2 of the License, or
  12 * (at your option) any later version.
  13 *
  14 * This program is distributed in the hope that it will be useful,
  15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
  16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  17 * GNU General Public License for more details.
  18 *
  19 * You should have received a copy of the GNU General Public License
  20 * along with this program; if not, write to the Free Software
  21 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  22 *
  23 * Arguments:
  24 *       watchdog  = TX watchdog timeout
  25 *       tx_fifo_kb = Size of TX FIFO in KB
  26 *
  27 * History:
  28 *        04/16/05      Dustin McIntire          Initial version
  29 */
  30static const char version[] =
  31         "smc911x.c: v1.0 04-16-2005 by Dustin McIntire <dustin@sensoria.com>\n";
  32
  33/* Debugging options */
  34#define ENABLE_SMC_DEBUG_RX             0
  35#define ENABLE_SMC_DEBUG_TX             0
  36#define ENABLE_SMC_DEBUG_DMA            0
  37#define ENABLE_SMC_DEBUG_PKTS           0
  38#define ENABLE_SMC_DEBUG_MISC           0
  39#define ENABLE_SMC_DEBUG_FUNC           0
  40
  41#define SMC_DEBUG_RX            ((ENABLE_SMC_DEBUG_RX   ? 1 : 0) << 0)
  42#define SMC_DEBUG_TX            ((ENABLE_SMC_DEBUG_TX   ? 1 : 0) << 1)
  43#define SMC_DEBUG_DMA           ((ENABLE_SMC_DEBUG_DMA  ? 1 : 0) << 2)
  44#define SMC_DEBUG_PKTS          ((ENABLE_SMC_DEBUG_PKTS ? 1 : 0) << 3)
  45#define SMC_DEBUG_MISC          ((ENABLE_SMC_DEBUG_MISC ? 1 : 0) << 4)
  46#define SMC_DEBUG_FUNC          ((ENABLE_SMC_DEBUG_FUNC ? 1 : 0) << 5)
  47
  48#ifndef SMC_DEBUG
  49#define SMC_DEBUG        ( SMC_DEBUG_RX   | \
  50                           SMC_DEBUG_TX   | \
  51                           SMC_DEBUG_DMA  | \
  52                           SMC_DEBUG_PKTS | \
  53                           SMC_DEBUG_MISC | \
  54                           SMC_DEBUG_FUNC   \
  55                         )
  56#endif
  57
  58#include <linux/init.h>
  59#include <linux/module.h>
  60#include <linux/kernel.h>
  61#include <linux/sched.h>
  62#include <linux/delay.h>
  63#include <linux/interrupt.h>
  64#include <linux/errno.h>
  65#include <linux/ioport.h>
  66#include <linux/crc32.h>
  67#include <linux/device.h>
  68#include <linux/platform_device.h>
  69#include <linux/spinlock.h>
  70#include <linux/ethtool.h>
  71#include <linux/mii.h>
  72#include <linux/workqueue.h>
  73
  74#include <linux/netdevice.h>
  75#include <linux/etherdevice.h>
  76#include <linux/skbuff.h>
  77
  78#include <asm/io.h>
  79
  80#include "smc911x.h"
  81
  82/*
  83 * Transmit timeout, default 5 seconds.
  84 */
  85static int watchdog = 5000;
  86module_param(watchdog, int, 0400);
  87MODULE_PARM_DESC(watchdog, "transmit timeout in milliseconds");
  88
  89static int tx_fifo_kb=8;
  90module_param(tx_fifo_kb, int, 0400);
  91MODULE_PARM_DESC(tx_fifo_kb,"transmit FIFO size in KB (1<x<15)(default=8)");
  92
  93MODULE_LICENSE("GPL");
  94MODULE_ALIAS("platform:smc911x");
  95
  96/*
  97 * The internal workings of the driver.  If you are changing anything
  98 * here with the SMC stuff, you should have the datasheet and know
  99 * what you are doing.
 100 */
 101#define CARDNAME "smc911x"
 102
 103/*
 104 * Use power-down feature of the chip
 105 */
 106#define POWER_DOWN               1
 107
 108#if SMC_DEBUG > 0
 109#define DBG(n, args...)                          \
 110        do {                                     \
 111                if (SMC_DEBUG & (n))             \
 112                        printk(args);            \
 113        } while (0)
 114
 115#define PRINTK(args...)   printk(args)
 116#else
 117#define DBG(n, args...)   do { } while (0)
 118#define PRINTK(args...)   printk(KERN_DEBUG args)
 119#endif
 120
 121#if SMC_DEBUG_PKTS > 0
 122static void PRINT_PKT(u_char *buf, int length)
 123{
 124        int i;
 125        int remainder;
 126        int lines;
 127
 128        lines = length / 16;
 129        remainder = length % 16;
 130
 131        for (i = 0; i < lines ; i ++) {
 132                int cur;
 133                for (cur = 0; cur < 8; cur++) {
 134                        u_char a, b;
 135                        a = *buf++;
 136                        b = *buf++;
 137                        printk("%02x%02x ", a, b);
 138                }
 139                printk("\n");
 140        }
 141        for (i = 0; i < remainder/2 ; i++) {
 142                u_char a, b;
 143                a = *buf++;
 144                b = *buf++;
 145                printk("%02x%02x ", a, b);
 146        }
 147        printk("\n");
 148}
 149#else
 150#define PRINT_PKT(x...)  do { } while (0)
 151#endif
 152
 153
 154/* this enables an interrupt in the interrupt mask register */
 155#define SMC_ENABLE_INT(lp, x) do {                      \
 156        unsigned int  __mask;                           \
 157        __mask = SMC_GET_INT_EN((lp));                  \
 158        __mask |= (x);                                  \
 159        SMC_SET_INT_EN((lp), __mask);                   \
 160} while (0)
 161
 162/* this disables an interrupt from the interrupt mask register */
 163#define SMC_DISABLE_INT(lp, x) do {                     \
 164        unsigned int  __mask;                           \
 165        __mask = SMC_GET_INT_EN((lp));                  \
 166        __mask &= ~(x);                                 \
 167        SMC_SET_INT_EN((lp), __mask);                   \
 168} while (0)
 169
 170/*
 171 * this does a soft reset on the device
 172 */
 173static void smc911x_reset(struct net_device *dev)
 174{
 175        struct smc911x_local *lp = netdev_priv(dev);
 176        unsigned int reg, timeout=0, resets=1, irq_cfg;
 177        unsigned long flags;
 178
 179        DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __func__);
 180
 181        /*       Take out of PM setting first */
 182        if ((SMC_GET_PMT_CTRL(lp) & PMT_CTRL_READY_) == 0) {
 183                /* Write to the bytetest will take out of powerdown */
 184                SMC_SET_BYTE_TEST(lp, 0);
 185                timeout=10;
 186                do {
 187                        udelay(10);
 188                        reg = SMC_GET_PMT_CTRL(lp) & PMT_CTRL_READY_;
 189                } while (--timeout && !reg);
 190                if (timeout == 0) {
 191                        PRINTK("%s: smc911x_reset timeout waiting for PM restore\n", dev->name);
 192                        return;
 193                }
 194        }
 195
 196        /* Disable all interrupts */
 197        spin_lock_irqsave(&lp->lock, flags);
 198        SMC_SET_INT_EN(lp, 0);
 199        spin_unlock_irqrestore(&lp->lock, flags);
 200
 201        while (resets--) {
 202                SMC_SET_HW_CFG(lp, HW_CFG_SRST_);
 203                timeout=10;
 204                do {
 205                        udelay(10);
 206                        reg = SMC_GET_HW_CFG(lp);
 207                        /* If chip indicates reset timeout then try again */
 208                        if (reg & HW_CFG_SRST_TO_) {
 209                                PRINTK("%s: chip reset timeout, retrying...\n", dev->name);
 210                                resets++;
 211                                break;
 212                        }
 213                } while (--timeout && (reg & HW_CFG_SRST_));
 214        }
 215        if (timeout == 0) {
 216                PRINTK("%s: smc911x_reset timeout waiting for reset\n", dev->name);
 217                return;
 218        }
 219
 220        /* make sure EEPROM has finished loading before setting GPIO_CFG */
 221        timeout=1000;
 222        while (--timeout && (SMC_GET_E2P_CMD(lp) & E2P_CMD_EPC_BUSY_))
 223                udelay(10);
 224
 225        if (timeout == 0){
 226                PRINTK("%s: smc911x_reset timeout waiting for EEPROM busy\n", dev->name);
 227                return;
 228        }
 229
 230        /* Initialize interrupts */
 231        SMC_SET_INT_EN(lp, 0);
 232        SMC_ACK_INT(lp, -1);
 233
 234        /* Reset the FIFO level and flow control settings */
 235        SMC_SET_HW_CFG(lp, (lp->tx_fifo_kb & 0xF) << 16);
 236//TODO: Figure out what appropriate pause time is
 237        SMC_SET_FLOW(lp, FLOW_FCPT_ | FLOW_FCEN_);
 238        SMC_SET_AFC_CFG(lp, lp->afc_cfg);
 239
 240
 241        /* Set to LED outputs */
 242        SMC_SET_GPIO_CFG(lp, 0x70070000);
 243
 244        /*
 245         * Deassert IRQ for 1*10us for edge type interrupts
 246         * and drive IRQ pin push-pull
 247         */
 248        irq_cfg = (1 << 24) | INT_CFG_IRQ_EN_ | INT_CFG_IRQ_TYPE_;
 249#ifdef SMC_DYNAMIC_BUS_CONFIG
 250        if (lp->cfg.irq_polarity)
 251                irq_cfg |= INT_CFG_IRQ_POL_;
 252#endif
 253        SMC_SET_IRQ_CFG(lp, irq_cfg);
 254
 255        /* clear anything saved */
 256        if (lp->pending_tx_skb != NULL) {
 257                dev_kfree_skb (lp->pending_tx_skb);
 258                lp->pending_tx_skb = NULL;
 259                dev->stats.tx_errors++;
 260                dev->stats.tx_aborted_errors++;
 261        }
 262}
 263
 264/*
 265 * Enable Interrupts, Receive, and Transmit
 266 */
 267static void smc911x_enable(struct net_device *dev)
 268{
 269        struct smc911x_local *lp = netdev_priv(dev);
 270        unsigned mask, cfg, cr;
 271        unsigned long flags;
 272
 273        DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __func__);
 274
 275        spin_lock_irqsave(&lp->lock, flags);
 276
 277        SMC_SET_MAC_ADDR(lp, dev->dev_addr);
 278
 279        /* Enable TX */
 280        cfg = SMC_GET_HW_CFG(lp);
 281        cfg &= HW_CFG_TX_FIF_SZ_ | 0xFFF;
 282        cfg |= HW_CFG_SF_;
 283        SMC_SET_HW_CFG(lp, cfg);
 284        SMC_SET_FIFO_TDA(lp, 0xFF);
 285        /* Update TX stats on every 64 packets received or every 1 sec */
 286        SMC_SET_FIFO_TSL(lp, 64);
 287        SMC_SET_GPT_CFG(lp, GPT_CFG_TIMER_EN_ | 10000);
 288
 289        SMC_GET_MAC_CR(lp, cr);
 290        cr |= MAC_CR_TXEN_ | MAC_CR_HBDIS_;
 291        SMC_SET_MAC_CR(lp, cr);
 292        SMC_SET_TX_CFG(lp, TX_CFG_TX_ON_);
 293
 294        /* Add 2 byte padding to start of packets */
 295        SMC_SET_RX_CFG(lp, (2<<8) & RX_CFG_RXDOFF_);
 296
 297        /* Turn on receiver and enable RX */
 298        if (cr & MAC_CR_RXEN_)
 299                DBG(SMC_DEBUG_RX, "%s: Receiver already enabled\n", dev->name);
 300
 301        SMC_SET_MAC_CR(lp, cr | MAC_CR_RXEN_);
 302
 303        /* Interrupt on every received packet */
 304        SMC_SET_FIFO_RSA(lp, 0x01);
 305        SMC_SET_FIFO_RSL(lp, 0x00);
 306
 307        /* now, enable interrupts */
 308        mask = INT_EN_TDFA_EN_ | INT_EN_TSFL_EN_ | INT_EN_RSFL_EN_ |
 309                INT_EN_GPT_INT_EN_ | INT_EN_RXDFH_INT_EN_ | INT_EN_RXE_EN_ |
 310                INT_EN_PHY_INT_EN_;
 311        if (IS_REV_A(lp->revision))
 312                mask|=INT_EN_RDFL_EN_;
 313        else {
 314                mask|=INT_EN_RDFO_EN_;
 315        }
 316        SMC_ENABLE_INT(lp, mask);
 317
 318        spin_unlock_irqrestore(&lp->lock, flags);
 319}
 320
 321/*
 322 * this puts the device in an inactive state
 323 */
 324static void smc911x_shutdown(struct net_device *dev)
 325{
 326        struct smc911x_local *lp = netdev_priv(dev);
 327        unsigned cr;
 328        unsigned long flags;
 329
 330        DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", CARDNAME, __func__);
 331
 332        /* Disable IRQ's */
 333        SMC_SET_INT_EN(lp, 0);
 334
 335        /* Turn of Rx and TX */
 336        spin_lock_irqsave(&lp->lock, flags);
 337        SMC_GET_MAC_CR(lp, cr);
 338        cr &= ~(MAC_CR_TXEN_ | MAC_CR_RXEN_ | MAC_CR_HBDIS_);
 339        SMC_SET_MAC_CR(lp, cr);
 340        SMC_SET_TX_CFG(lp, TX_CFG_STOP_TX_);
 341        spin_unlock_irqrestore(&lp->lock, flags);
 342}
 343
 344static inline void smc911x_drop_pkt(struct net_device *dev)
 345{
 346        struct smc911x_local *lp = netdev_priv(dev);
 347        unsigned int fifo_count, timeout, reg;
 348
 349        DBG(SMC_DEBUG_FUNC | SMC_DEBUG_RX, "%s: --> %s\n", CARDNAME, __func__);
 350        fifo_count = SMC_GET_RX_FIFO_INF(lp) & 0xFFFF;
 351        if (fifo_count <= 4) {
 352                /* Manually dump the packet data */
 353                while (fifo_count--)
 354                        SMC_GET_RX_FIFO(lp);
 355        } else   {
 356                /* Fast forward through the bad packet */
 357                SMC_SET_RX_DP_CTRL(lp, RX_DP_CTRL_FFWD_BUSY_);
 358                timeout=50;
 359                do {
 360                        udelay(10);
 361                        reg = SMC_GET_RX_DP_CTRL(lp) & RX_DP_CTRL_FFWD_BUSY_;
 362                } while (--timeout && reg);
 363                if (timeout == 0) {
 364                        PRINTK("%s: timeout waiting for RX fast forward\n", dev->name);
 365                }
 366        }
 367}
 368
 369/*
 370 * This is the procedure to handle the receipt of a packet.
 371 * It should be called after checking for packet presence in
 372 * the RX status FIFO.   It must be called with the spin lock
 373 * already held.
 374 */
 375static inline void       smc911x_rcv(struct net_device *dev)
 376{
 377        struct smc911x_local *lp = netdev_priv(dev);
 378        unsigned int pkt_len, status;
 379        struct sk_buff *skb;
 380        unsigned char *data;
 381
 382        DBG(SMC_DEBUG_FUNC | SMC_DEBUG_RX, "%s: --> %s\n",
 383                dev->name, __func__);
 384        status = SMC_GET_RX_STS_FIFO(lp);
 385        DBG(SMC_DEBUG_RX, "%s: Rx pkt len %d status 0x%08x\n",
 386                dev->name, (status & 0x3fff0000) >> 16, status & 0xc000ffff);
 387        pkt_len = (status & RX_STS_PKT_LEN_) >> 16;
 388        if (status & RX_STS_ES_) {
 389                /* Deal with a bad packet */
 390                dev->stats.rx_errors++;
 391                if (status & RX_STS_CRC_ERR_)
 392                        dev->stats.rx_crc_errors++;
 393                else {
 394                        if (status & RX_STS_LEN_ERR_)
 395                                dev->stats.rx_length_errors++;
 396                        if (status & RX_STS_MCAST_)
 397                                dev->stats.multicast++;
 398                }
 399                /* Remove the bad packet data from the RX FIFO */
 400                smc911x_drop_pkt(dev);
 401        } else {
 402                /* Receive a valid packet */
 403                /* Alloc a buffer with extra room for DMA alignment */
 404                skb = netdev_alloc_skb(dev, pkt_len+32);
 405                if (unlikely(skb == NULL)) {
 406                        PRINTK( "%s: Low memory, rcvd packet dropped.\n",
 407                                dev->name);
 408                        dev->stats.rx_dropped++;
 409                        smc911x_drop_pkt(dev);
 410                        return;
 411                }
 412                /* Align IP header to 32 bits
 413                 * Note that the device is configured to add a 2
 414                 * byte padding to the packet start, so we really
 415                 * want to write to the orignal data pointer */
 416                data = skb->data;
 417                skb_reserve(skb, 2);
 418                skb_put(skb,pkt_len-4);
 419#ifdef SMC_USE_DMA
 420                {
 421                unsigned int fifo;
 422                /* Lower the FIFO threshold if possible */
 423                fifo = SMC_GET_FIFO_INT(lp);
 424                if (fifo & 0xFF) fifo--;
 425                DBG(SMC_DEBUG_RX, "%s: Setting RX stat FIFO threshold to %d\n",
 426                        dev->name, fifo & 0xff);
 427                SMC_SET_FIFO_INT(lp, fifo);
 428                /* Setup RX DMA */
 429                SMC_SET_RX_CFG(lp, RX_CFG_RX_END_ALGN16_ | ((2<<8) & RX_CFG_RXDOFF_));
 430                lp->rxdma_active = 1;
 431                lp->current_rx_skb = skb;
 432                SMC_PULL_DATA(lp, data, (pkt_len+2+15) & ~15);
 433                /* Packet processing deferred to DMA RX interrupt */
 434                }
 435#else
 436                SMC_SET_RX_CFG(lp, RX_CFG_RX_END_ALGN4_ | ((2<<8) & RX_CFG_RXDOFF_));
 437                SMC_PULL_DATA(lp, data, pkt_len+2+3);
 438
 439                DBG(SMC_DEBUG_PKTS, "%s: Received packet\n", dev->name);
 440                PRINT_PKT(data, ((pkt_len - 4) <= 64) ? pkt_len - 4 : 64);
 441                skb->protocol = eth_type_trans(skb, dev);
 442                netif_rx(skb);
 443                dev->stats.rx_packets++;
 444                dev->stats.rx_bytes += pkt_len-4;
 445#endif
 446        }
 447}
 448
 449/*
 450 * This is called to actually send a packet to the chip.
 451 */
 452static void smc911x_hardware_send_pkt(struct net_device *dev)
 453{
 454        struct smc911x_local *lp = netdev_priv(dev);
 455        struct sk_buff *skb;
 456        unsigned int cmdA, cmdB, len;
 457        unsigned char *buf;
 458
 459        DBG(SMC_DEBUG_FUNC | SMC_DEBUG_TX, "%s: --> %s\n", dev->name, __func__);
 460        BUG_ON(lp->pending_tx_skb == NULL);
 461
 462        skb = lp->pending_tx_skb;
 463        lp->pending_tx_skb = NULL;
 464
 465        /* cmdA {25:24] data alignment [20:16] start offset [10:0] buffer length */
 466        /* cmdB {31:16] pkt tag [10:0] length */
 467#ifdef SMC_USE_DMA
 468        /* 16 byte buffer alignment mode */
 469        buf = (char*)((u32)(skb->data) & ~0xF);
 470        len = (skb->len + 0xF + ((u32)skb->data & 0xF)) & ~0xF;
 471        cmdA = (1<<24) | (((u32)skb->data & 0xF)<<16) |
 472                        TX_CMD_A_INT_FIRST_SEG_ | TX_CMD_A_INT_LAST_SEG_ |
 473                        skb->len;
 474#else
 475        buf = (char*)((u32)skb->data & ~0x3);
 476        len = (skb->len + 3 + ((u32)skb->data & 3)) & ~0x3;
 477        cmdA = (((u32)skb->data & 0x3) << 16) |
 478                        TX_CMD_A_INT_FIRST_SEG_ | TX_CMD_A_INT_LAST_SEG_ |
 479                        skb->len;
 480#endif
 481        /* tag is packet length so we can use this in stats update later */
 482        cmdB = (skb->len  << 16) | (skb->len & 0x7FF);
 483
 484        DBG(SMC_DEBUG_TX, "%s: TX PKT LENGTH 0x%04x (%d) BUF 0x%p CMDA 0x%08x CMDB 0x%08x\n",
 485                 dev->name, len, len, buf, cmdA, cmdB);
 486        SMC_SET_TX_FIFO(lp, cmdA);
 487        SMC_SET_TX_FIFO(lp, cmdB);
 488
 489        DBG(SMC_DEBUG_PKTS, "%s: Transmitted packet\n", dev->name);
 490        PRINT_PKT(buf, len <= 64 ? len : 64);
 491
 492        /* Send pkt via PIO or DMA */
 493#ifdef SMC_USE_DMA
 494        lp->current_tx_skb = skb;
 495        SMC_PUSH_DATA(lp, buf, len);
 496        /* DMA complete IRQ will free buffer and set jiffies */
 497#else
 498        SMC_PUSH_DATA(lp, buf, len);
 499        netif_trans_update(dev);
 500        dev_kfree_skb_irq(skb);
 501#endif
 502        if (!lp->tx_throttle) {
 503                netif_wake_queue(dev);
 504        }
 505        SMC_ENABLE_INT(lp, INT_EN_TDFA_EN_ | INT_EN_TSFL_EN_);
 506}
 507
 508/*
 509 * Since I am not sure if I will have enough room in the chip's ram
 510 * to store the packet, I call this routine which either sends it
 511 * now, or set the card to generates an interrupt when ready
 512 * for the packet.
 513 */
 514static int smc911x_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 515{
 516        struct smc911x_local *lp = netdev_priv(dev);
 517        unsigned int free;
 518        unsigned long flags;
 519
 520        DBG(SMC_DEBUG_FUNC | SMC_DEBUG_TX, "%s: --> %s\n",
 521                dev->name, __func__);
 522
 523        spin_lock_irqsave(&lp->lock, flags);
 524
 525        BUG_ON(lp->pending_tx_skb != NULL);
 526
 527        free = SMC_GET_TX_FIFO_INF(lp) & TX_FIFO_INF_TDFREE_;
 528        DBG(SMC_DEBUG_TX, "%s: TX free space %d\n", dev->name, free);
 529
 530        /* Turn off the flow when running out of space in FIFO */
 531        if (free <= SMC911X_TX_FIFO_LOW_THRESHOLD) {
 532                DBG(SMC_DEBUG_TX, "%s: Disabling data flow due to low FIFO space (%d)\n",
 533                        dev->name, free);
 534                /* Reenable when at least 1 packet of size MTU present */
 535                SMC_SET_FIFO_TDA(lp, (SMC911X_TX_FIFO_LOW_THRESHOLD)/64);
 536                lp->tx_throttle = 1;
 537                netif_stop_queue(dev);
 538        }
 539
 540        /* Drop packets when we run out of space in TX FIFO
 541         * Account for overhead required for:
 542         *
 543         *        Tx command words                       8 bytes
 544         *        Start offset                           15 bytes
 545         *        End padding                            15 bytes
 546         */
 547        if (unlikely(free < (skb->len + 8 + 15 + 15))) {
 548                printk("%s: No Tx free space %d < %d\n",
 549                        dev->name, free, skb->len);
 550                lp->pending_tx_skb = NULL;
 551                dev->stats.tx_errors++;
 552                dev->stats.tx_dropped++;
 553                spin_unlock_irqrestore(&lp->lock, flags);
 554                dev_kfree_skb(skb);
 555                return NETDEV_TX_OK;
 556        }
 557
 558#ifdef SMC_USE_DMA
 559        {
 560                /* If the DMA is already running then defer this packet Tx until
 561                 * the DMA IRQ starts it
 562                 */
 563                if (lp->txdma_active) {
 564                        DBG(SMC_DEBUG_TX | SMC_DEBUG_DMA, "%s: Tx DMA running, deferring packet\n", dev->name);
 565                        lp->pending_tx_skb = skb;
 566                        netif_stop_queue(dev);
 567                        spin_unlock_irqrestore(&lp->lock, flags);
 568                        return NETDEV_TX_OK;
 569                } else {
 570                        DBG(SMC_DEBUG_TX | SMC_DEBUG_DMA, "%s: Activating Tx DMA\n", dev->name);
 571                        lp->txdma_active = 1;
 572                }
 573        }
 574#endif
 575        lp->pending_tx_skb = skb;
 576        smc911x_hardware_send_pkt(dev);
 577        spin_unlock_irqrestore(&lp->lock, flags);
 578
 579        return NETDEV_TX_OK;
 580}
 581
 582/*
 583 * This handles a TX status interrupt, which is only called when:
 584 * - a TX error occurred, or
 585 * - TX of a packet completed.
 586 */
 587static void smc911x_tx(struct net_device *dev)
 588{
 589        struct smc911x_local *lp = netdev_priv(dev);
 590        unsigned int tx_status;
 591
 592        DBG(SMC_DEBUG_FUNC | SMC_DEBUG_TX, "%s: --> %s\n",
 593                dev->name, __func__);
 594
 595        /* Collect the TX status */
 596        while (((SMC_GET_TX_FIFO_INF(lp) & TX_FIFO_INF_TSUSED_) >> 16) != 0) {
 597                DBG(SMC_DEBUG_TX, "%s: Tx stat FIFO used 0x%04x\n",
 598                        dev->name,
 599                        (SMC_GET_TX_FIFO_INF(lp) & TX_FIFO_INF_TSUSED_) >> 16);
 600                tx_status = SMC_GET_TX_STS_FIFO(lp);
 601                dev->stats.tx_packets++;
 602                dev->stats.tx_bytes+=tx_status>>16;
 603                DBG(SMC_DEBUG_TX, "%s: Tx FIFO tag 0x%04x status 0x%04x\n",
 604                        dev->name, (tx_status & 0xffff0000) >> 16,
 605                        tx_status & 0x0000ffff);
 606                /* count Tx errors, but ignore lost carrier errors when in
 607                 * full-duplex mode */
 608                if ((tx_status & TX_STS_ES_) && !(lp->ctl_rfduplx &&
 609                    !(tx_status & 0x00000306))) {
 610                        dev->stats.tx_errors++;
 611                }
 612                if (tx_status & TX_STS_MANY_COLL_) {
 613                        dev->stats.collisions+=16;
 614                        dev->stats.tx_aborted_errors++;
 615                } else {
 616                        dev->stats.collisions+=(tx_status & TX_STS_COLL_CNT_) >> 3;
 617                }
 618                /* carrier error only has meaning for half-duplex communication */
 619                if ((tx_status & (TX_STS_LOC_ | TX_STS_NO_CARR_)) &&
 620                    !lp->ctl_rfduplx) {
 621                        dev->stats.tx_carrier_errors++;
 622                }
 623                if (tx_status & TX_STS_LATE_COLL_) {
 624                        dev->stats.collisions++;
 625                        dev->stats.tx_aborted_errors++;
 626                }
 627        }
 628}
 629
 630
 631/*---PHY CONTROL AND CONFIGURATION-----------------------------------------*/
 632/*
 633 * Reads a register from the MII Management serial interface
 634 */
 635
 636static int smc911x_phy_read(struct net_device *dev, int phyaddr, int phyreg)
 637{
 638        struct smc911x_local *lp = netdev_priv(dev);
 639        unsigned int phydata;
 640
 641        SMC_GET_MII(lp, phyreg, phyaddr, phydata);
 642
 643        DBG(SMC_DEBUG_MISC, "%s: phyaddr=0x%x, phyreg=0x%02x, phydata=0x%04x\n",
 644                __func__, phyaddr, phyreg, phydata);
 645        return phydata;
 646}
 647
 648
 649/*
 650 * Writes a register to the MII Management serial interface
 651 */
 652static void smc911x_phy_write(struct net_device *dev, int phyaddr, int phyreg,
 653                        int phydata)
 654{
 655        struct smc911x_local *lp = netdev_priv(dev);
 656
 657        DBG(SMC_DEBUG_MISC, "%s: phyaddr=0x%x, phyreg=0x%x, phydata=0x%x\n",
 658                __func__, phyaddr, phyreg, phydata);
 659
 660        SMC_SET_MII(lp, phyreg, phyaddr, phydata);
 661}
 662
 663/*
 664 * Finds and reports the PHY address (115 and 117 have external
 665 * PHY interface 118 has internal only
 666 */
 667static void smc911x_phy_detect(struct net_device *dev)
 668{
 669        struct smc911x_local *lp = netdev_priv(dev);
 670        int phyaddr;
 671        unsigned int cfg, id1, id2;
 672
 673        DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __func__);
 674
 675        lp->phy_type = 0;
 676
 677        /*
 678         * Scan all 32 PHY addresses if necessary, starting at
 679         * PHY#1 to PHY#31, and then PHY#0 last.
 680         */
 681        switch(lp->version) {
 682                case CHIP_9115:
 683                case CHIP_9117:
 684                case CHIP_9215:
 685                case CHIP_9217:
 686                        cfg = SMC_GET_HW_CFG(lp);
 687                        if (cfg & HW_CFG_EXT_PHY_DET_) {
 688                                cfg &= ~HW_CFG_PHY_CLK_SEL_;
 689                                cfg |= HW_CFG_PHY_CLK_SEL_CLK_DIS_;
 690                                SMC_SET_HW_CFG(lp, cfg);
 691                                udelay(10); /* Wait for clocks to stop */
 692
 693                                cfg |= HW_CFG_EXT_PHY_EN_;
 694                                SMC_SET_HW_CFG(lp, cfg);
 695                                udelay(10); /* Wait for clocks to stop */
 696
 697                                cfg &= ~HW_CFG_PHY_CLK_SEL_;
 698                                cfg |= HW_CFG_PHY_CLK_SEL_EXT_PHY_;
 699                                SMC_SET_HW_CFG(lp, cfg);
 700                                udelay(10); /* Wait for clocks to stop */
 701
 702                                cfg |= HW_CFG_SMI_SEL_;
 703                                SMC_SET_HW_CFG(lp, cfg);
 704
 705                                for (phyaddr = 1; phyaddr < 32; ++phyaddr) {
 706
 707                                        /* Read the PHY identifiers */
 708                                        SMC_GET_PHY_ID1(lp, phyaddr & 31, id1);
 709                                        SMC_GET_PHY_ID2(lp, phyaddr & 31, id2);
 710
 711                                        /* Make sure it is a valid identifier */
 712                                        if (id1 != 0x0000 && id1 != 0xffff &&
 713                                            id1 != 0x8000 && id2 != 0x0000 &&
 714                                            id2 != 0xffff && id2 != 0x8000) {
 715                                                /* Save the PHY's address */
 716                                                lp->mii.phy_id = phyaddr & 31;
 717                                                lp->phy_type = id1 << 16 | id2;
 718                                                break;
 719                                        }
 720                                }
 721                                if (phyaddr < 32)
 722                                        /* Found an external PHY */
 723                                        break;
 724                        }
 725                default:
 726                        /* Internal media only */
 727                        SMC_GET_PHY_ID1(lp, 1, id1);
 728                        SMC_GET_PHY_ID2(lp, 1, id2);
 729                        /* Save the PHY's address */
 730                        lp->mii.phy_id = 1;
 731                        lp->phy_type = id1 << 16 | id2;
 732        }
 733
 734        DBG(SMC_DEBUG_MISC, "%s: phy_id1=0x%x, phy_id2=0x%x phyaddr=0x%d\n",
 735                dev->name, id1, id2, lp->mii.phy_id);
 736}
 737
 738/*
 739 * Sets the PHY to a configuration as determined by the user.
 740 * Called with spin_lock held.
 741 */
 742static int smc911x_phy_fixed(struct net_device *dev)
 743{
 744        struct smc911x_local *lp = netdev_priv(dev);
 745        int phyaddr = lp->mii.phy_id;
 746        int bmcr;
 747
 748        DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __func__);
 749
 750        /* Enter Link Disable state */
 751        SMC_GET_PHY_BMCR(lp, phyaddr, bmcr);
 752        bmcr |= BMCR_PDOWN;
 753        SMC_SET_PHY_BMCR(lp, phyaddr, bmcr);
 754
 755        /*
 756         * Set our fixed capabilities
 757         * Disable auto-negotiation
 758         */
 759        bmcr &= ~BMCR_ANENABLE;
 760        if (lp->ctl_rfduplx)
 761                bmcr |= BMCR_FULLDPLX;
 762
 763        if (lp->ctl_rspeed == 100)
 764                bmcr |= BMCR_SPEED100;
 765
 766        /* Write our capabilities to the phy control register */
 767        SMC_SET_PHY_BMCR(lp, phyaddr, bmcr);
 768
 769        /* Re-Configure the Receive/Phy Control register */
 770        bmcr &= ~BMCR_PDOWN;
 771        SMC_SET_PHY_BMCR(lp, phyaddr, bmcr);
 772
 773        return 1;
 774}
 775
 776/**
 777 * smc911x_phy_reset - reset the phy
 778 * @dev: net device
 779 * @phy: phy address
 780 *
 781 * Issue a software reset for the specified PHY and
 782 * wait up to 100ms for the reset to complete.   We should
 783 * not access the PHY for 50ms after issuing the reset.
 784 *
 785 * The time to wait appears to be dependent on the PHY.
 786 *
 787 */
 788static int smc911x_phy_reset(struct net_device *dev, int phy)
 789{
 790        struct smc911x_local *lp = netdev_priv(dev);
 791        int timeout;
 792        unsigned long flags;
 793        unsigned int reg;
 794
 795        DBG(SMC_DEBUG_FUNC, "%s: --> %s()\n", dev->name, __func__);
 796
 797        spin_lock_irqsave(&lp->lock, flags);
 798        reg = SMC_GET_PMT_CTRL(lp);
 799        reg &= ~0xfffff030;
 800        reg |= PMT_CTRL_PHY_RST_;
 801        SMC_SET_PMT_CTRL(lp, reg);
 802        spin_unlock_irqrestore(&lp->lock, flags);
 803        for (timeout = 2; timeout; timeout--) {
 804                msleep(50);
 805                spin_lock_irqsave(&lp->lock, flags);
 806                reg = SMC_GET_PMT_CTRL(lp);
 807                spin_unlock_irqrestore(&lp->lock, flags);
 808                if (!(reg & PMT_CTRL_PHY_RST_)) {
 809                        /* extra delay required because the phy may
 810                         * not be completed with its reset
 811                         * when PHY_BCR_RESET_ is cleared. 256us
 812                         * should suffice, but use 500us to be safe
 813                         */
 814                        udelay(500);
 815                break;
 816                }
 817        }
 818
 819        return reg & PMT_CTRL_PHY_RST_;
 820}
 821
 822/**
 823 * smc911x_phy_powerdown - powerdown phy
 824 * @dev: net device
 825 * @phy: phy address
 826 *
 827 * Power down the specified PHY
 828 */
 829static void smc911x_phy_powerdown(struct net_device *dev, int phy)
 830{
 831        struct smc911x_local *lp = netdev_priv(dev);
 832        unsigned int bmcr;
 833
 834        /* Enter Link Disable state */
 835        SMC_GET_PHY_BMCR(lp, phy, bmcr);
 836        bmcr |= BMCR_PDOWN;
 837        SMC_SET_PHY_BMCR(lp, phy, bmcr);
 838}
 839
 840/**
 841 * smc911x_phy_check_media - check the media status and adjust BMCR
 842 * @dev: net device
 843 * @init: set true for initialisation
 844 *
 845 * Select duplex mode depending on negotiation state.   This
 846 * also updates our carrier state.
 847 */
 848static void smc911x_phy_check_media(struct net_device *dev, int init)
 849{
 850        struct smc911x_local *lp = netdev_priv(dev);
 851        int phyaddr = lp->mii.phy_id;
 852        unsigned int bmcr, cr;
 853
 854        DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __func__);
 855
 856        if (mii_check_media(&lp->mii, netif_msg_link(lp), init)) {
 857                /* duplex state has changed */
 858                SMC_GET_PHY_BMCR(lp, phyaddr, bmcr);
 859                SMC_GET_MAC_CR(lp, cr);
 860                if (lp->mii.full_duplex) {
 861                        DBG(SMC_DEBUG_MISC, "%s: Configuring for full-duplex mode\n", dev->name);
 862                        bmcr |= BMCR_FULLDPLX;
 863                        cr |= MAC_CR_RCVOWN_;
 864                } else {
 865                        DBG(SMC_DEBUG_MISC, "%s: Configuring for half-duplex mode\n", dev->name);
 866                        bmcr &= ~BMCR_FULLDPLX;
 867                        cr &= ~MAC_CR_RCVOWN_;
 868                }
 869                SMC_SET_PHY_BMCR(lp, phyaddr, bmcr);
 870                SMC_SET_MAC_CR(lp, cr);
 871        }
 872}
 873
 874/*
 875 * Configures the specified PHY through the MII management interface
 876 * using Autonegotiation.
 877 * Calls smc911x_phy_fixed() if the user has requested a certain config.
 878 * If RPC ANEG bit is set, the media selection is dependent purely on
 879 * the selection by the MII (either in the MII BMCR reg or the result
 880 * of autonegotiation.)  If the RPC ANEG bit is cleared, the selection
 881 * is controlled by the RPC SPEED and RPC DPLX bits.
 882 */
 883static void smc911x_phy_configure(struct work_struct *work)
 884{
 885        struct smc911x_local *lp = container_of(work, struct smc911x_local,
 886                                                phy_configure);
 887        struct net_device *dev = lp->netdev;
 888        int phyaddr = lp->mii.phy_id;
 889        int my_phy_caps; /* My PHY capabilities */
 890        int my_ad_caps; /* My Advertised capabilities */
 891        int status;
 892        unsigned long flags;
 893
 894        DBG(SMC_DEBUG_FUNC, "%s: --> %s()\n", dev->name, __func__);
 895
 896        /*
 897         * We should not be called if phy_type is zero.
 898         */
 899        if (lp->phy_type == 0)
 900                return;
 901
 902        if (smc911x_phy_reset(dev, phyaddr)) {
 903                printk("%s: PHY reset timed out\n", dev->name);
 904                return;
 905        }
 906        spin_lock_irqsave(&lp->lock, flags);
 907
 908        /*
 909         * Enable PHY Interrupts (for register 18)
 910         * Interrupts listed here are enabled
 911         */
 912        SMC_SET_PHY_INT_MASK(lp, phyaddr, PHY_INT_MASK_ENERGY_ON_ |
 913                 PHY_INT_MASK_ANEG_COMP_ | PHY_INT_MASK_REMOTE_FAULT_ |
 914                 PHY_INT_MASK_LINK_DOWN_);
 915
 916        /* If the user requested no auto neg, then go set his request */
 917        if (lp->mii.force_media) {
 918                smc911x_phy_fixed(dev);
 919                goto smc911x_phy_configure_exit;
 920        }
 921
 922        /* Copy our capabilities from MII_BMSR to MII_ADVERTISE */
 923        SMC_GET_PHY_BMSR(lp, phyaddr, my_phy_caps);
 924        if (!(my_phy_caps & BMSR_ANEGCAPABLE)) {
 925                printk(KERN_INFO "Auto negotiation NOT supported\n");
 926                smc911x_phy_fixed(dev);
 927                goto smc911x_phy_configure_exit;
 928        }
 929
 930        /* CSMA capable w/ both pauses */
 931        my_ad_caps = ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM;
 932
 933        if (my_phy_caps & BMSR_100BASE4)
 934                my_ad_caps |= ADVERTISE_100BASE4;
 935        if (my_phy_caps & BMSR_100FULL)
 936                my_ad_caps |= ADVERTISE_100FULL;
 937        if (my_phy_caps & BMSR_100HALF)
 938                my_ad_caps |= ADVERTISE_100HALF;
 939        if (my_phy_caps & BMSR_10FULL)
 940                my_ad_caps |= ADVERTISE_10FULL;
 941        if (my_phy_caps & BMSR_10HALF)
 942                my_ad_caps |= ADVERTISE_10HALF;
 943
 944        /* Disable capabilities not selected by our user */
 945        if (lp->ctl_rspeed != 100)
 946                my_ad_caps &= ~(ADVERTISE_100BASE4|ADVERTISE_100FULL|ADVERTISE_100HALF);
 947
 948         if (!lp->ctl_rfduplx)
 949                my_ad_caps &= ~(ADVERTISE_100FULL|ADVERTISE_10FULL);
 950
 951        /* Update our Auto-Neg Advertisement Register */
 952        SMC_SET_PHY_MII_ADV(lp, phyaddr, my_ad_caps);
 953        lp->mii.advertising = my_ad_caps;
 954
 955        /*
 956         * Read the register back.       Without this, it appears that when
 957         * auto-negotiation is restarted, sometimes it isn't ready and
 958         * the link does not come up.
 959         */
 960        udelay(10);
 961        SMC_GET_PHY_MII_ADV(lp, phyaddr, status);
 962
 963        DBG(SMC_DEBUG_MISC, "%s: phy caps=0x%04x\n", dev->name, my_phy_caps);
 964        DBG(SMC_DEBUG_MISC, "%s: phy advertised caps=0x%04x\n", dev->name, my_ad_caps);
 965
 966        /* Restart auto-negotiation process in order to advertise my caps */
 967        SMC_SET_PHY_BMCR(lp, phyaddr, BMCR_ANENABLE | BMCR_ANRESTART);
 968
 969        smc911x_phy_check_media(dev, 1);
 970
 971smc911x_phy_configure_exit:
 972        spin_unlock_irqrestore(&lp->lock, flags);
 973}
 974
 975/*
 976 * smc911x_phy_interrupt
 977 *
 978 * Purpose:  Handle interrupts relating to PHY register 18. This is
 979 *       called from the "hard" interrupt handler under our private spinlock.
 980 */
 981static void smc911x_phy_interrupt(struct net_device *dev)
 982{
 983        struct smc911x_local *lp = netdev_priv(dev);
 984        int phyaddr = lp->mii.phy_id;
 985        int status;
 986
 987        DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __func__);
 988
 989        if (lp->phy_type == 0)
 990                return;
 991
 992        smc911x_phy_check_media(dev, 0);
 993        /* read to clear status bits */
 994        SMC_GET_PHY_INT_SRC(lp, phyaddr,status);
 995        DBG(SMC_DEBUG_MISC, "%s: PHY interrupt status 0x%04x\n",
 996                dev->name, status & 0xffff);
 997        DBG(SMC_DEBUG_MISC, "%s: AFC_CFG 0x%08x\n",
 998                dev->name, SMC_GET_AFC_CFG(lp));
 999}
1000
1001/*--- END PHY CONTROL AND CONFIGURATION-------------------------------------*/
1002
1003/*
1004 * This is the main routine of the driver, to handle the device when
1005 * it needs some attention.
1006 */
1007static irqreturn_t smc911x_interrupt(int irq, void *dev_id)
1008{
1009        struct net_device *dev = dev_id;
1010        struct smc911x_local *lp = netdev_priv(dev);
1011        unsigned int status, mask, timeout;
1012        unsigned int rx_overrun=0, cr, pkts;
1013        unsigned long flags;
1014
1015        DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __func__);
1016
1017        spin_lock_irqsave(&lp->lock, flags);
1018
1019        /* Spurious interrupt check */
1020        if ((SMC_GET_IRQ_CFG(lp) & (INT_CFG_IRQ_INT_ | INT_CFG_IRQ_EN_)) !=
1021                (INT_CFG_IRQ_INT_ | INT_CFG_IRQ_EN_)) {
1022                spin_unlock_irqrestore(&lp->lock, flags);
1023                return IRQ_NONE;
1024        }
1025
1026        mask = SMC_GET_INT_EN(lp);
1027        SMC_SET_INT_EN(lp, 0);
1028
1029        /* set a timeout value, so I don't stay here forever */
1030        timeout = 8;
1031
1032
1033        do {
1034                status = SMC_GET_INT(lp);
1035
1036                DBG(SMC_DEBUG_MISC, "%s: INT 0x%08x MASK 0x%08x OUTSIDE MASK 0x%08x\n",
1037                        dev->name, status, mask, status & ~mask);
1038
1039                status &= mask;
1040                if (!status)
1041                        break;
1042
1043                /* Handle SW interrupt condition */
1044                if (status & INT_STS_SW_INT_) {
1045                        SMC_ACK_INT(lp, INT_STS_SW_INT_);
1046                        mask &= ~INT_EN_SW_INT_EN_;
1047                }
1048                /* Handle various error conditions */
1049                if (status & INT_STS_RXE_) {
1050                        SMC_ACK_INT(lp, INT_STS_RXE_);
1051                        dev->stats.rx_errors++;
1052                }
1053                if (status & INT_STS_RXDFH_INT_) {
1054                        SMC_ACK_INT(lp, INT_STS_RXDFH_INT_);
1055                        dev->stats.rx_dropped+=SMC_GET_RX_DROP(lp);
1056                 }
1057                /* Undocumented interrupt-what is the right thing to do here? */
1058                if (status & INT_STS_RXDF_INT_) {
1059                        SMC_ACK_INT(lp, INT_STS_RXDF_INT_);
1060                }
1061
1062                /* Rx Data FIFO exceeds set level */
1063                if (status & INT_STS_RDFL_) {
1064                        if (IS_REV_A(lp->revision)) {
1065                                rx_overrun=1;
1066                                SMC_GET_MAC_CR(lp, cr);
1067                                cr &= ~MAC_CR_RXEN_;
1068                                SMC_SET_MAC_CR(lp, cr);
1069                                DBG(SMC_DEBUG_RX, "%s: RX overrun\n", dev->name);
1070                                dev->stats.rx_errors++;
1071                                dev->stats.rx_fifo_errors++;
1072                        }
1073                        SMC_ACK_INT(lp, INT_STS_RDFL_);
1074                }
1075                if (status & INT_STS_RDFO_) {
1076                        if (!IS_REV_A(lp->revision)) {
1077                                SMC_GET_MAC_CR(lp, cr);
1078                                cr &= ~MAC_CR_RXEN_;
1079                                SMC_SET_MAC_CR(lp, cr);
1080                                rx_overrun=1;
1081                                DBG(SMC_DEBUG_RX, "%s: RX overrun\n", dev->name);
1082                                dev->stats.rx_errors++;
1083                                dev->stats.rx_fifo_errors++;
1084                        }
1085                        SMC_ACK_INT(lp, INT_STS_RDFO_);
1086                }
1087                /* Handle receive condition */
1088                if ((status & INT_STS_RSFL_) || rx_overrun) {
1089                        unsigned int fifo;
1090                        DBG(SMC_DEBUG_RX, "%s: RX irq\n", dev->name);
1091                        fifo = SMC_GET_RX_FIFO_INF(lp);
1092                        pkts = (fifo & RX_FIFO_INF_RXSUSED_) >> 16;
1093                        DBG(SMC_DEBUG_RX, "%s: Rx FIFO pkts %d, bytes %d\n",
1094                                dev->name, pkts, fifo & 0xFFFF );
1095                        if (pkts != 0) {
1096#ifdef SMC_USE_DMA
1097                                unsigned int fifo;
1098                                if (lp->rxdma_active){
1099                                        DBG(SMC_DEBUG_RX | SMC_DEBUG_DMA,
1100                                                "%s: RX DMA active\n", dev->name);
1101                                        /* The DMA is already running so up the IRQ threshold */
1102                                        fifo = SMC_GET_FIFO_INT(lp) & ~0xFF;
1103                                        fifo |= pkts & 0xFF;
1104                                        DBG(SMC_DEBUG_RX,
1105                                                "%s: Setting RX stat FIFO threshold to %d\n",
1106                                                dev->name, fifo & 0xff);
1107                                        SMC_SET_FIFO_INT(lp, fifo);
1108                                } else
1109#endif
1110                                smc911x_rcv(dev);
1111                        }
1112                        SMC_ACK_INT(lp, INT_STS_RSFL_);
1113                }
1114                /* Handle transmit FIFO available */
1115                if (status & INT_STS_TDFA_) {
1116                        DBG(SMC_DEBUG_TX, "%s: TX data FIFO space available irq\n", dev->name);
1117                        SMC_SET_FIFO_TDA(lp, 0xFF);
1118                        lp->tx_throttle = 0;
1119#ifdef SMC_USE_DMA
1120                        if (!lp->txdma_active)
1121#endif
1122                                netif_wake_queue(dev);
1123                        SMC_ACK_INT(lp, INT_STS_TDFA_);
1124                }
1125                /* Handle transmit done condition */
1126#if 1
1127                if (status & (INT_STS_TSFL_ | INT_STS_GPT_INT_)) {
1128                        DBG(SMC_DEBUG_TX | SMC_DEBUG_MISC,
1129                                "%s: Tx stat FIFO limit (%d) /GPT irq\n",
1130                                dev->name, (SMC_GET_FIFO_INT(lp) & 0x00ff0000) >> 16);
1131                        smc911x_tx(dev);
1132                        SMC_SET_GPT_CFG(lp, GPT_CFG_TIMER_EN_ | 10000);
1133                        SMC_ACK_INT(lp, INT_STS_TSFL_);
1134                        SMC_ACK_INT(lp, INT_STS_TSFL_ | INT_STS_GPT_INT_);
1135                }
1136#else
1137                if (status & INT_STS_TSFL_) {
1138                        DBG(SMC_DEBUG_TX, "%s: TX status FIFO limit (%d) irq\n", dev->name, );
1139                        smc911x_tx(dev);
1140                        SMC_ACK_INT(lp, INT_STS_TSFL_);
1141                }
1142
1143                if (status & INT_STS_GPT_INT_) {
1144                        DBG(SMC_DEBUG_RX, "%s: IRQ_CFG 0x%08x FIFO_INT 0x%08x RX_CFG 0x%08x\n",
1145                                dev->name,
1146                                SMC_GET_IRQ_CFG(lp),
1147                                SMC_GET_FIFO_INT(lp),
1148                                SMC_GET_RX_CFG(lp));
1149                        DBG(SMC_DEBUG_RX, "%s: Rx Stat FIFO Used 0x%02x "
1150                                "Data FIFO Used 0x%04x Stat FIFO 0x%08x\n",
1151                                dev->name,
1152                                (SMC_GET_RX_FIFO_INF(lp) & 0x00ff0000) >> 16,
1153                                SMC_GET_RX_FIFO_INF(lp) & 0xffff,
1154                                SMC_GET_RX_STS_FIFO_PEEK(lp));
1155                        SMC_SET_GPT_CFG(lp, GPT_CFG_TIMER_EN_ | 10000);
1156                        SMC_ACK_INT(lp, INT_STS_GPT_INT_);
1157                }
1158#endif
1159
1160                /* Handle PHY interrupt condition */
1161                if (status & INT_STS_PHY_INT_) {
1162                        DBG(SMC_DEBUG_MISC, "%s: PHY irq\n", dev->name);
1163                        smc911x_phy_interrupt(dev);
1164                        SMC_ACK_INT(lp, INT_STS_PHY_INT_);
1165                }
1166        } while (--timeout);
1167
1168        /* restore mask state */
1169        SMC_SET_INT_EN(lp, mask);
1170
1171        DBG(SMC_DEBUG_MISC, "%s: Interrupt done (%d loops)\n",
1172                dev->name, 8-timeout);
1173
1174        spin_unlock_irqrestore(&lp->lock, flags);
1175
1176        return IRQ_HANDLED;
1177}
1178
1179#ifdef SMC_USE_DMA
1180static void
1181smc911x_tx_dma_irq(int dma, void *data)
1182{
1183        struct net_device *dev = (struct net_device *)data;
1184        struct smc911x_local *lp = netdev_priv(dev);
1185        struct sk_buff *skb = lp->current_tx_skb;
1186        unsigned long flags;
1187
1188        DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __func__);
1189
1190        DBG(SMC_DEBUG_TX | SMC_DEBUG_DMA, "%s: TX DMA irq handler\n", dev->name);
1191        /* Clear the DMA interrupt sources */
1192        SMC_DMA_ACK_IRQ(dev, dma);
1193        BUG_ON(skb == NULL);
1194        dma_unmap_single(NULL, tx_dmabuf, tx_dmalen, DMA_TO_DEVICE);
1195        netif_trans_update(dev);
1196        dev_kfree_skb_irq(skb);
1197        lp->current_tx_skb = NULL;
1198        if (lp->pending_tx_skb != NULL)
1199                smc911x_hardware_send_pkt(dev);
1200        else {
1201                DBG(SMC_DEBUG_TX | SMC_DEBUG_DMA,
1202                        "%s: No pending Tx packets. DMA disabled\n", dev->name);
1203                spin_lock_irqsave(&lp->lock, flags);
1204                lp->txdma_active = 0;
1205                if (!lp->tx_throttle) {
1206                        netif_wake_queue(dev);
1207                }
1208                spin_unlock_irqrestore(&lp->lock, flags);
1209        }
1210
1211        DBG(SMC_DEBUG_TX | SMC_DEBUG_DMA,
1212                "%s: TX DMA irq completed\n", dev->name);
1213}
1214static void
1215smc911x_rx_dma_irq(int dma, void *data)
1216{
1217        struct net_device *dev = (struct net_device *)data;
1218        unsigned long ioaddr = dev->base_addr;
1219        struct smc911x_local *lp = netdev_priv(dev);
1220        struct sk_buff *skb = lp->current_rx_skb;
1221        unsigned long flags;
1222        unsigned int pkts;
1223
1224        DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __func__);
1225        DBG(SMC_DEBUG_RX | SMC_DEBUG_DMA, "%s: RX DMA irq handler\n", dev->name);
1226        /* Clear the DMA interrupt sources */
1227        SMC_DMA_ACK_IRQ(dev, dma);
1228        dma_unmap_single(NULL, rx_dmabuf, rx_dmalen, DMA_FROM_DEVICE);
1229        BUG_ON(skb == NULL);
1230        lp->current_rx_skb = NULL;
1231        PRINT_PKT(skb->data, skb->len);
1232        skb->protocol = eth_type_trans(skb, dev);
1233        dev->stats.rx_packets++;
1234        dev->stats.rx_bytes += skb->len;
1235        netif_rx(skb);
1236
1237        spin_lock_irqsave(&lp->lock, flags);
1238        pkts = (SMC_GET_RX_FIFO_INF(lp) & RX_FIFO_INF_RXSUSED_) >> 16;
1239        if (pkts != 0) {
1240                smc911x_rcv(dev);
1241        }else {
1242                lp->rxdma_active = 0;
1243        }
1244        spin_unlock_irqrestore(&lp->lock, flags);
1245        DBG(SMC_DEBUG_RX | SMC_DEBUG_DMA,
1246                "%s: RX DMA irq completed. DMA RX FIFO PKTS %d\n",
1247                dev->name, pkts);
1248}
1249#endif   /* SMC_USE_DMA */
1250
1251#ifdef CONFIG_NET_POLL_CONTROLLER
1252/*
1253 * Polling receive - used by netconsole and other diagnostic tools
1254 * to allow network i/o with interrupts disabled.
1255 */
1256static void smc911x_poll_controller(struct net_device *dev)
1257{
1258        disable_irq(dev->irq);
1259        smc911x_interrupt(dev->irq, dev);
1260        enable_irq(dev->irq);
1261}
1262#endif
1263
1264/* Our watchdog timed out. Called by the networking layer */
1265static void smc911x_timeout(struct net_device *dev)
1266{
1267        struct smc911x_local *lp = netdev_priv(dev);
1268        int status, mask;
1269        unsigned long flags;
1270
1271        DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __func__);
1272
1273        spin_lock_irqsave(&lp->lock, flags);
1274        status = SMC_GET_INT(lp);
1275        mask = SMC_GET_INT_EN(lp);
1276        spin_unlock_irqrestore(&lp->lock, flags);
1277        DBG(SMC_DEBUG_MISC, "%s: INT 0x%02x MASK 0x%02x\n",
1278                dev->name, status, mask);
1279
1280        /* Dump the current TX FIFO contents and restart */
1281        mask = SMC_GET_TX_CFG(lp);
1282        SMC_SET_TX_CFG(lp, mask | TX_CFG_TXS_DUMP_ | TX_CFG_TXD_DUMP_);
1283        /*
1284         * Reconfiguring the PHY doesn't seem like a bad idea here, but
1285         * smc911x_phy_configure() calls msleep() which calls schedule_timeout()
1286         * which calls schedule().       Hence we use a work queue.
1287         */
1288        if (lp->phy_type != 0)
1289                schedule_work(&lp->phy_configure);
1290
1291        /* We can accept TX packets again */
1292        netif_trans_update(dev); /* prevent tx timeout */
1293        netif_wake_queue(dev);
1294}
1295
1296/*
1297 * This routine will, depending on the values passed to it,
1298 * either make it accept multicast packets, go into
1299 * promiscuous mode (for TCPDUMP and cousins) or accept
1300 * a select set of multicast packets
1301 */
1302static void smc911x_set_multicast_list(struct net_device *dev)
1303{
1304        struct smc911x_local *lp = netdev_priv(dev);
1305        unsigned int multicast_table[2];
1306        unsigned int mcr, update_multicast = 0;
1307        unsigned long flags;
1308
1309        DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __func__);
1310
1311        spin_lock_irqsave(&lp->lock, flags);
1312        SMC_GET_MAC_CR(lp, mcr);
1313        spin_unlock_irqrestore(&lp->lock, flags);
1314
1315        if (dev->flags & IFF_PROMISC) {
1316
1317                DBG(SMC_DEBUG_MISC, "%s: RCR_PRMS\n", dev->name);
1318                mcr |= MAC_CR_PRMS_;
1319        }
1320        /*
1321         * Here, I am setting this to accept all multicast packets.
1322         * I don't need to zero the multicast table, because the flag is
1323         * checked before the table is
1324         */
1325        else if (dev->flags & IFF_ALLMULTI || netdev_mc_count(dev) > 16) {
1326                DBG(SMC_DEBUG_MISC, "%s: RCR_ALMUL\n", dev->name);
1327                mcr |= MAC_CR_MCPAS_;
1328        }
1329
1330        /*
1331         * This sets the internal hardware table to filter out unwanted
1332         * multicast packets before they take up memory.
1333         *
1334         * The SMC chip uses a hash table where the high 6 bits of the CRC of
1335         * address are the offset into the table.       If that bit is 1, then the
1336         * multicast packet is accepted.  Otherwise, it's dropped silently.
1337         *
1338         * To use the 6 bits as an offset into the table, the high 1 bit is
1339         * the number of the 32 bit register, while the low 5 bits are the bit
1340         * within that register.
1341         */
1342        else if (!netdev_mc_empty(dev)) {
1343                struct netdev_hw_addr *ha;
1344
1345                /* Set the Hash perfec mode */
1346                mcr |= MAC_CR_HPFILT_;
1347
1348                /* start with a table of all zeros: reject all */
1349                memset(multicast_table, 0, sizeof(multicast_table));
1350
1351                netdev_for_each_mc_addr(ha, dev) {
1352                        u32 position;
1353
1354                        /* upper 6 bits are used as hash index */
1355                        position = ether_crc(ETH_ALEN, ha->addr)>>26;
1356
1357                        multicast_table[position>>5] |= 1 << (position&0x1f);
1358                }
1359
1360                /* be sure I get rid of flags I might have set */
1361                mcr &= ~(MAC_CR_PRMS_ | MAC_CR_MCPAS_);
1362
1363                /* now, the table can be loaded into the chipset */
1364                update_multicast = 1;
1365        } else   {
1366                DBG(SMC_DEBUG_MISC, "%s: ~(MAC_CR_PRMS_|MAC_CR_MCPAS_)\n",
1367                        dev->name);
1368                mcr &= ~(MAC_CR_PRMS_ | MAC_CR_MCPAS_);
1369
1370                /*
1371                 * since I'm disabling all multicast entirely, I need to
1372                 * clear the multicast list
1373                 */
1374                memset(multicast_table, 0, sizeof(multicast_table));
1375                update_multicast = 1;
1376        }
1377
1378        spin_lock_irqsave(&lp->lock, flags);
1379        SMC_SET_MAC_CR(lp, mcr);
1380        if (update_multicast) {
1381                DBG(SMC_DEBUG_MISC,
1382                        "%s: update mcast hash table 0x%08x 0x%08x\n",
1383                        dev->name, multicast_table[0], multicast_table[1]);
1384                SMC_SET_HASHL(lp, multicast_table[0]);
1385                SMC_SET_HASHH(lp, multicast_table[1]);
1386        }
1387        spin_unlock_irqrestore(&lp->lock, flags);
1388}
1389
1390
1391/*
1392 * Open and Initialize the board
1393 *
1394 * Set up everything, reset the card, etc..
1395 */
1396static int
1397smc911x_open(struct net_device *dev)
1398{
1399        struct smc911x_local *lp = netdev_priv(dev);
1400
1401        DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __func__);
1402
1403        /* reset the hardware */
1404        smc911x_reset(dev);
1405
1406        /* Configure the PHY, initialize the link state */
1407        smc911x_phy_configure(&lp->phy_configure);
1408
1409        /* Turn on Tx + Rx */
1410        smc911x_enable(dev);
1411
1412        netif_start_queue(dev);
1413
1414        return 0;
1415}
1416
1417/*
1418 * smc911x_close
1419 *
1420 * this makes the board clean up everything that it can
1421 * and not talk to the outside world.    Caused by
1422 * an 'ifconfig ethX down'
1423 */
1424static int smc911x_close(struct net_device *dev)
1425{
1426        struct smc911x_local *lp = netdev_priv(dev);
1427
1428        DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __func__);
1429
1430        netif_stop_queue(dev);
1431        netif_carrier_off(dev);
1432
1433        /* clear everything */
1434        smc911x_shutdown(dev);
1435
1436        if (lp->phy_type != 0) {
1437                /* We need to ensure that no calls to
1438                 * smc911x_phy_configure are pending.
1439                 */
1440                cancel_work_sync(&lp->phy_configure);
1441                smc911x_phy_powerdown(dev, lp->mii.phy_id);
1442        }
1443
1444        if (lp->pending_tx_skb) {
1445                dev_kfree_skb(lp->pending_tx_skb);
1446                lp->pending_tx_skb = NULL;
1447        }
1448
1449        return 0;
1450}
1451
1452/*
1453 * Ethtool support
1454 */
1455static int
1456smc911x_ethtool_getsettings(struct net_device *dev, struct ethtool_cmd *cmd)
1457{
1458        struct smc911x_local *lp = netdev_priv(dev);
1459        int ret, status;
1460        unsigned long flags;
1461
1462        DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __func__);
1463        cmd->maxtxpkt = 1;
1464        cmd->maxrxpkt = 1;
1465
1466        if (lp->phy_type != 0) {
1467                spin_lock_irqsave(&lp->lock, flags);
1468                ret = mii_ethtool_gset(&lp->mii, cmd);
1469                spin_unlock_irqrestore(&lp->lock, flags);
1470        } else {
1471                cmd->supported = SUPPORTED_10baseT_Half |
1472                                SUPPORTED_10baseT_Full |
1473                                SUPPORTED_TP | SUPPORTED_AUI;
1474
1475                if (lp->ctl_rspeed == 10)
1476                        ethtool_cmd_speed_set(cmd, SPEED_10);
1477                else if (lp->ctl_rspeed == 100)
1478                        ethtool_cmd_speed_set(cmd, SPEED_100);
1479
1480                cmd->autoneg = AUTONEG_DISABLE;
1481                if (lp->mii.phy_id==1)
1482                        cmd->transceiver = XCVR_INTERNAL;
1483                else
1484                        cmd->transceiver = XCVR_EXTERNAL;
1485                cmd->port = 0;
1486                SMC_GET_PHY_SPECIAL(lp, lp->mii.phy_id, status);
1487                cmd->duplex =
1488                        (status & (PHY_SPECIAL_SPD_10FULL_ | PHY_SPECIAL_SPD_100FULL_)) ?
1489                                DUPLEX_FULL : DUPLEX_HALF;
1490                ret = 0;
1491        }
1492
1493        return ret;
1494}
1495
1496static int
1497smc911x_ethtool_setsettings(struct net_device *dev, struct ethtool_cmd *cmd)
1498{
1499        struct smc911x_local *lp = netdev_priv(dev);
1500        int ret;
1501        unsigned long flags;
1502
1503        if (lp->phy_type != 0) {
1504                spin_lock_irqsave(&lp->lock, flags);
1505                ret = mii_ethtool_sset(&lp->mii, cmd);
1506                spin_unlock_irqrestore(&lp->lock, flags);
1507        } else {
1508                if (cmd->autoneg != AUTONEG_DISABLE ||
1509                        cmd->speed != SPEED_10 ||
1510                        (cmd->duplex != DUPLEX_HALF && cmd->duplex != DUPLEX_FULL) ||
1511                        (cmd->port != PORT_TP && cmd->port != PORT_AUI))
1512                        return -EINVAL;
1513
1514                lp->ctl_rfduplx = cmd->duplex == DUPLEX_FULL;
1515
1516                ret = 0;
1517        }
1518
1519        return ret;
1520}
1521
1522static void
1523smc911x_ethtool_getdrvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
1524{
1525        strlcpy(info->driver, CARDNAME, sizeof(info->driver));
1526        strlcpy(info->version, version, sizeof(info->version));
1527        strlcpy(info->bus_info, dev_name(dev->dev.parent),
1528                sizeof(info->bus_info));
1529}
1530
1531static int smc911x_ethtool_nwayreset(struct net_device *dev)
1532{
1533        struct smc911x_local *lp = netdev_priv(dev);
1534        int ret = -EINVAL;
1535        unsigned long flags;
1536
1537        if (lp->phy_type != 0) {
1538                spin_lock_irqsave(&lp->lock, flags);
1539                ret = mii_nway_restart(&lp->mii);
1540                spin_unlock_irqrestore(&lp->lock, flags);
1541        }
1542
1543        return ret;
1544}
1545
1546static u32 smc911x_ethtool_getmsglevel(struct net_device *dev)
1547{
1548        struct smc911x_local *lp = netdev_priv(dev);
1549        return lp->msg_enable;
1550}
1551
1552static void smc911x_ethtool_setmsglevel(struct net_device *dev, u32 level)
1553{
1554        struct smc911x_local *lp = netdev_priv(dev);
1555        lp->msg_enable = level;
1556}
1557
1558static int smc911x_ethtool_getregslen(struct net_device *dev)
1559{
1560        /* System regs + MAC regs + PHY regs */
1561        return (((E2P_CMD - ID_REV)/4 + 1) +
1562                        (WUCSR - MAC_CR)+1 + 32) * sizeof(u32);
1563}
1564
1565static void smc911x_ethtool_getregs(struct net_device *dev,
1566                                                                                 struct ethtool_regs* regs, void *buf)
1567{
1568        struct smc911x_local *lp = netdev_priv(dev);
1569        unsigned long flags;
1570        u32 reg,i,j=0;
1571        u32 *data = (u32*)buf;
1572
1573        regs->version = lp->version;
1574        for(i=ID_REV;i<=E2P_CMD;i+=4) {
1575                data[j++] = SMC_inl(lp, i);
1576        }
1577        for(i=MAC_CR;i<=WUCSR;i++) {
1578                spin_lock_irqsave(&lp->lock, flags);
1579                SMC_GET_MAC_CSR(lp, i, reg);
1580                spin_unlock_irqrestore(&lp->lock, flags);
1581                data[j++] = reg;
1582        }
1583        for(i=0;i<=31;i++) {
1584                spin_lock_irqsave(&lp->lock, flags);
1585                SMC_GET_MII(lp, i, lp->mii.phy_id, reg);
1586                spin_unlock_irqrestore(&lp->lock, flags);
1587                data[j++] = reg & 0xFFFF;
1588        }
1589}
1590
1591static int smc911x_ethtool_wait_eeprom_ready(struct net_device *dev)
1592{
1593        struct smc911x_local *lp = netdev_priv(dev);
1594        unsigned int timeout;
1595        int e2p_cmd;
1596
1597        e2p_cmd = SMC_GET_E2P_CMD(lp);
1598        for(timeout=10;(e2p_cmd & E2P_CMD_EPC_BUSY_) && timeout; timeout--) {
1599                if (e2p_cmd & E2P_CMD_EPC_TIMEOUT_) {
1600                        PRINTK("%s: %s timeout waiting for EEPROM to respond\n",
1601                                dev->name, __func__);
1602                        return -EFAULT;
1603                }
1604                mdelay(1);
1605                e2p_cmd = SMC_GET_E2P_CMD(lp);
1606        }
1607        if (timeout == 0) {
1608                PRINTK("%s: %s timeout waiting for EEPROM CMD not busy\n",
1609                        dev->name, __func__);
1610                return -ETIMEDOUT;
1611        }
1612        return 0;
1613}
1614
1615static inline int smc911x_ethtool_write_eeprom_cmd(struct net_device *dev,
1616                                                                                                        int cmd, int addr)
1617{
1618        struct smc911x_local *lp = netdev_priv(dev);
1619        int ret;
1620
1621        if ((ret = smc911x_ethtool_wait_eeprom_ready(dev))!=0)
1622                return ret;
1623        SMC_SET_E2P_CMD(lp, E2P_CMD_EPC_BUSY_ |
1624                ((cmd) & (0x7<<28)) |
1625                ((addr) & 0xFF));
1626        return 0;
1627}
1628
1629static inline int smc911x_ethtool_read_eeprom_byte(struct net_device *dev,
1630                                                                                                        u8 *data)
1631{
1632        struct smc911x_local *lp = netdev_priv(dev);
1633        int ret;
1634
1635        if ((ret = smc911x_ethtool_wait_eeprom_ready(dev))!=0)
1636                return ret;
1637        *data = SMC_GET_E2P_DATA(lp);
1638        return 0;
1639}
1640
1641static inline int smc911x_ethtool_write_eeprom_byte(struct net_device *dev,
1642                                                                                                         u8 data)
1643{
1644        struct smc911x_local *lp = netdev_priv(dev);
1645        int ret;
1646
1647        if ((ret = smc911x_ethtool_wait_eeprom_ready(dev))!=0)
1648                return ret;
1649        SMC_SET_E2P_DATA(lp, data);
1650        return 0;
1651}
1652
1653static int smc911x_ethtool_geteeprom(struct net_device *dev,
1654                                                                          struct ethtool_eeprom *eeprom, u8 *data)
1655{
1656        u8 eebuf[SMC911X_EEPROM_LEN];
1657        int i, ret;
1658
1659        for(i=0;i<SMC911X_EEPROM_LEN;i++) {
1660                if ((ret=smc911x_ethtool_write_eeprom_cmd(dev, E2P_CMD_EPC_CMD_READ_, i ))!=0)
1661                        return ret;
1662                if ((ret=smc911x_ethtool_read_eeprom_byte(dev, &eebuf[i]))!=0)
1663                        return ret;
1664                }
1665        memcpy(data, eebuf+eeprom->offset, eeprom->len);
1666        return 0;
1667}
1668
1669static int smc911x_ethtool_seteeprom(struct net_device *dev,
1670                                                                           struct ethtool_eeprom *eeprom, u8 *data)
1671{
1672        int i, ret;
1673
1674        /* Enable erase */
1675        if ((ret=smc911x_ethtool_write_eeprom_cmd(dev, E2P_CMD_EPC_CMD_EWEN_, 0 ))!=0)
1676                return ret;
1677        for(i=eeprom->offset;i<(eeprom->offset+eeprom->len);i++) {
1678                /* erase byte */
1679                if ((ret=smc911x_ethtool_write_eeprom_cmd(dev, E2P_CMD_EPC_CMD_ERASE_, i ))!=0)
1680                        return ret;
1681                /* write byte */
1682                if ((ret=smc911x_ethtool_write_eeprom_byte(dev, *data))!=0)
1683                         return ret;
1684                if ((ret=smc911x_ethtool_write_eeprom_cmd(dev, E2P_CMD_EPC_CMD_WRITE_, i ))!=0)
1685                        return ret;
1686                }
1687         return 0;
1688}
1689
1690static int smc911x_ethtool_geteeprom_len(struct net_device *dev)
1691{
1692         return SMC911X_EEPROM_LEN;
1693}
1694
1695static const struct ethtool_ops smc911x_ethtool_ops = {
1696        .get_settings    = smc911x_ethtool_getsettings,
1697        .set_settings    = smc911x_ethtool_setsettings,
1698        .get_drvinfo     = smc911x_ethtool_getdrvinfo,
1699        .get_msglevel    = smc911x_ethtool_getmsglevel,
1700        .set_msglevel    = smc911x_ethtool_setmsglevel,
1701        .nway_reset = smc911x_ethtool_nwayreset,
1702        .get_link        = ethtool_op_get_link,
1703        .get_regs_len    = smc911x_ethtool_getregslen,
1704        .get_regs        = smc911x_ethtool_getregs,
1705        .get_eeprom_len = smc911x_ethtool_geteeprom_len,
1706        .get_eeprom = smc911x_ethtool_geteeprom,
1707        .set_eeprom = smc911x_ethtool_seteeprom,
1708};
1709
1710/*
1711 * smc911x_findirq
1712 *
1713 * This routine has a simple purpose -- make the SMC chip generate an
1714 * interrupt, so an auto-detect routine can detect it, and find the IRQ,
1715 */
1716static int smc911x_findirq(struct net_device *dev)
1717{
1718        struct smc911x_local *lp = netdev_priv(dev);
1719        int timeout = 20;
1720        unsigned long cookie;
1721
1722        DBG(SMC_DEBUG_FUNC, "--> %s\n", __func__);
1723
1724        cookie = probe_irq_on();
1725
1726        /*
1727         * Force a SW interrupt
1728         */
1729
1730        SMC_SET_INT_EN(lp, INT_EN_SW_INT_EN_);
1731
1732        /*
1733         * Wait until positive that the interrupt has been generated
1734         */
1735        do {
1736                int int_status;
1737                udelay(10);
1738                int_status = SMC_GET_INT_EN(lp);
1739                if (int_status & INT_EN_SW_INT_EN_)
1740                         break;         /* got the interrupt */
1741        } while (--timeout);
1742
1743        /*
1744         * there is really nothing that I can do here if timeout fails,
1745         * as autoirq_report will return a 0 anyway, which is what I
1746         * want in this case.    Plus, the clean up is needed in both
1747         * cases.
1748         */
1749
1750        /* and disable all interrupts again */
1751        SMC_SET_INT_EN(lp, 0);
1752
1753        /* and return what I found */
1754        return probe_irq_off(cookie);
1755}
1756
1757static const struct net_device_ops smc911x_netdev_ops = {
1758        .ndo_open               = smc911x_open,
1759        .ndo_stop               = smc911x_close,
1760        .ndo_start_xmit         = smc911x_hard_start_xmit,
1761        .ndo_tx_timeout         = smc911x_timeout,
1762        .ndo_set_rx_mode        = smc911x_set_multicast_list,
1763        .ndo_change_mtu         = eth_change_mtu,
1764        .ndo_validate_addr      = eth_validate_addr,
1765        .ndo_set_mac_address    = eth_mac_addr,
1766#ifdef CONFIG_NET_POLL_CONTROLLER
1767        .ndo_poll_controller    = smc911x_poll_controller,
1768#endif
1769};
1770
1771/*
1772 * Function: smc911x_probe(unsigned long ioaddr)
1773 *
1774 * Purpose:
1775 *       Tests to see if a given ioaddr points to an SMC911x chip.
1776 *       Returns a 0 on success
1777 *
1778 * Algorithm:
1779 *       (1) see if the endian word is OK
1780 *       (1) see if I recognize the chip ID in the appropriate register
1781 *
1782 * Here I do typical initialization tasks.
1783 *
1784 * o  Initialize the structure if needed
1785 * o  print out my vanity message if not done so already
1786 * o  print out what type of hardware is detected
1787 * o  print out the ethernet address
1788 * o  find the IRQ
1789 * o  set up my private data
1790 * o  configure the dev structure with my subroutines
1791 * o  actually GRAB the irq.
1792 * o  GRAB the region
1793 */
1794static int smc911x_probe(struct net_device *dev)
1795{
1796        struct smc911x_local *lp = netdev_priv(dev);
1797        int i, retval;
1798        unsigned int val, chip_id, revision;
1799        const char *version_string;
1800        unsigned long irq_flags;
1801
1802        DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __func__);
1803
1804        /* First, see if the endian word is recognized */
1805        val = SMC_GET_BYTE_TEST(lp);
1806        DBG(SMC_DEBUG_MISC, "%s: endian probe returned 0x%04x\n", CARDNAME, val);
1807        if (val != 0x87654321) {
1808                printk(KERN_ERR "Invalid chip endian 0x%08x\n",val);
1809                retval = -ENODEV;
1810                goto err_out;
1811        }
1812
1813        /*
1814         * check if the revision register is something that I
1815         * recognize.   These might need to be added to later,
1816         * as future revisions could be added.
1817         */
1818        chip_id = SMC_GET_PN(lp);
1819        DBG(SMC_DEBUG_MISC, "%s: id probe returned 0x%04x\n", CARDNAME, chip_id);
1820        for(i=0;chip_ids[i].id != 0; i++) {
1821                if (chip_ids[i].id == chip_id) break;
1822        }
1823        if (!chip_ids[i].id) {
1824                printk(KERN_ERR "Unknown chip ID %04x\n", chip_id);
1825                retval = -ENODEV;
1826                goto err_out;
1827        }
1828        version_string = chip_ids[i].name;
1829
1830        revision = SMC_GET_REV(lp);
1831        DBG(SMC_DEBUG_MISC, "%s: revision = 0x%04x\n", CARDNAME, revision);
1832
1833        /* At this point I'll assume that the chip is an SMC911x. */
1834        DBG(SMC_DEBUG_MISC, "%s: Found a %s\n", CARDNAME, chip_ids[i].name);
1835
1836        /* Validate the TX FIFO size requested */
1837        if ((tx_fifo_kb < 2) || (tx_fifo_kb > 14)) {
1838                printk(KERN_ERR "Invalid TX FIFO size requested %d\n", tx_fifo_kb);
1839                retval = -EINVAL;
1840                goto err_out;
1841        }
1842
1843        /* fill in some of the fields */
1844        lp->version = chip_ids[i].id;
1845        lp->revision = revision;
1846        lp->tx_fifo_kb = tx_fifo_kb;
1847        /* Reverse calculate the RX FIFO size from the TX */
1848        lp->tx_fifo_size=(lp->tx_fifo_kb<<10) - 512;
1849        lp->rx_fifo_size= ((0x4000 - 512 - lp->tx_fifo_size) / 16) * 15;
1850
1851        /* Set the automatic flow control values */
1852        switch(lp->tx_fifo_kb) {
1853                /*
1854                 *       AFC_HI is about ((Rx Data Fifo Size)*2/3)/64
1855                 *       AFC_LO is AFC_HI/2
1856                 *       BACK_DUR is about 5uS*(AFC_LO) rounded down
1857                 */
1858                case 2:/* 13440 Rx Data Fifo Size */
1859                        lp->afc_cfg=0x008C46AF;break;
1860                case 3:/* 12480 Rx Data Fifo Size */
1861                        lp->afc_cfg=0x0082419F;break;
1862                case 4:/* 11520 Rx Data Fifo Size */
1863                        lp->afc_cfg=0x00783C9F;break;
1864                case 5:/* 10560 Rx Data Fifo Size */
1865                        lp->afc_cfg=0x006E374F;break;
1866                case 6:/* 9600 Rx Data Fifo Size */
1867                        lp->afc_cfg=0x0064328F;break;
1868                case 7:/* 8640 Rx Data Fifo Size */
1869                        lp->afc_cfg=0x005A2D7F;break;
1870                case 8:/* 7680 Rx Data Fifo Size */
1871                        lp->afc_cfg=0x0050287F;break;
1872                case 9:/* 6720 Rx Data Fifo Size */
1873                        lp->afc_cfg=0x0046236F;break;
1874                case 10:/* 5760 Rx Data Fifo Size */
1875                        lp->afc_cfg=0x003C1E6F;break;
1876                case 11:/* 4800 Rx Data Fifo Size */
1877                        lp->afc_cfg=0x0032195F;break;
1878                /*
1879                 *       AFC_HI is ~1520 bytes less than RX Data Fifo Size
1880                 *       AFC_LO is AFC_HI/2
1881                 *       BACK_DUR is about 5uS*(AFC_LO) rounded down
1882                 */
1883                case 12:/* 3840 Rx Data Fifo Size */
1884                        lp->afc_cfg=0x0024124F;break;
1885                case 13:/* 2880 Rx Data Fifo Size */
1886                        lp->afc_cfg=0x0015073F;break;
1887                case 14:/* 1920 Rx Data Fifo Size */
1888                        lp->afc_cfg=0x0006032F;break;
1889                 default:
1890                         PRINTK("%s: ERROR -- no AFC_CFG setting found",
1891                                dev->name);
1892                         break;
1893        }
1894
1895        DBG(SMC_DEBUG_MISC | SMC_DEBUG_TX | SMC_DEBUG_RX,
1896                "%s: tx_fifo %d rx_fifo %d afc_cfg 0x%08x\n", CARDNAME,
1897                lp->tx_fifo_size, lp->rx_fifo_size, lp->afc_cfg);
1898
1899        spin_lock_init(&lp->lock);
1900
1901        /* Get the MAC address */
1902        SMC_GET_MAC_ADDR(lp, dev->dev_addr);
1903
1904        /* now, reset the chip, and put it into a known state */
1905        smc911x_reset(dev);
1906
1907        /*
1908         * If dev->irq is 0, then the device has to be banged on to see
1909         * what the IRQ is.
1910         *
1911         * Specifying an IRQ is done with the assumption that the user knows
1912         * what (s)he is doing.  No checking is done!!!!
1913         */
1914        if (dev->irq < 1) {
1915                int trials;
1916
1917                trials = 3;
1918                while (trials--) {
1919                        dev->irq = smc911x_findirq(dev);
1920                        if (dev->irq)
1921                                break;
1922                        /* kick the card and try again */
1923                        smc911x_reset(dev);
1924                }
1925        }
1926        if (dev->irq == 0) {
1927                printk("%s: Couldn't autodetect your IRQ. Use irq=xx.\n",
1928                        dev->name);
1929                retval = -ENODEV;
1930                goto err_out;
1931        }
1932        dev->irq = irq_canonicalize(dev->irq);
1933
1934        /* Fill in the fields of the device structure with ethernet values. */
1935        ether_setup(dev);
1936
1937        dev->netdev_ops = &smc911x_netdev_ops;
1938        dev->watchdog_timeo = msecs_to_jiffies(watchdog);
1939        dev->ethtool_ops = &smc911x_ethtool_ops;
1940
1941        INIT_WORK(&lp->phy_configure, smc911x_phy_configure);
1942        lp->mii.phy_id_mask = 0x1f;
1943        lp->mii.reg_num_mask = 0x1f;
1944        lp->mii.force_media = 0;
1945        lp->mii.full_duplex = 0;
1946        lp->mii.dev = dev;
1947        lp->mii.mdio_read = smc911x_phy_read;
1948        lp->mii.mdio_write = smc911x_phy_write;
1949
1950        /*
1951         * Locate the phy, if any.
1952         */
1953        smc911x_phy_detect(dev);
1954
1955        /* Set default parameters */
1956        lp->msg_enable = NETIF_MSG_LINK;
1957        lp->ctl_rfduplx = 1;
1958        lp->ctl_rspeed = 100;
1959
1960#ifdef SMC_DYNAMIC_BUS_CONFIG
1961        irq_flags = lp->cfg.irq_flags;
1962#else
1963        irq_flags = IRQF_SHARED | SMC_IRQ_SENSE;
1964#endif
1965
1966        /* Grab the IRQ */
1967        retval = request_irq(dev->irq, smc911x_interrupt,
1968                             irq_flags, dev->name, dev);
1969        if (retval)
1970                goto err_out;
1971
1972#ifdef SMC_USE_DMA
1973        lp->rxdma = SMC_DMA_REQUEST(dev, smc911x_rx_dma_irq);
1974        lp->txdma = SMC_DMA_REQUEST(dev, smc911x_tx_dma_irq);
1975        lp->rxdma_active = 0;
1976        lp->txdma_active = 0;
1977        dev->dma = lp->rxdma;
1978#endif
1979
1980        retval = register_netdev(dev);
1981        if (retval == 0) {
1982                /* now, print out the card info, in a short format.. */
1983                printk("%s: %s (rev %d) at %#lx IRQ %d",
1984                        dev->name, version_string, lp->revision,
1985                        dev->base_addr, dev->irq);
1986
1987#ifdef SMC_USE_DMA
1988                if (lp->rxdma != -1)
1989                        printk(" RXDMA %d ", lp->rxdma);
1990
1991                if (lp->txdma != -1)
1992                        printk("TXDMA %d", lp->txdma);
1993#endif
1994                printk("\n");
1995                if (!is_valid_ether_addr(dev->dev_addr)) {
1996                        printk("%s: Invalid ethernet MAC address. Please "
1997                                        "set using ifconfig\n", dev->name);
1998                } else {
1999                        /* Print the Ethernet address */
2000                        printk("%s: Ethernet addr: %pM\n",
2001                                dev->name, dev->dev_addr);
2002                }
2003
2004                if (lp->phy_type == 0) {
2005                        PRINTK("%s: No PHY found\n", dev->name);
2006                } else if ((lp->phy_type & ~0xff) == LAN911X_INTERNAL_PHY_ID) {
2007                        PRINTK("%s: LAN911x Internal PHY\n", dev->name);
2008                } else {
2009                        PRINTK("%s: External PHY 0x%08x\n", dev->name, lp->phy_type);
2010                }
2011        }
2012
2013err_out:
2014#ifdef SMC_USE_DMA
2015        if (retval) {
2016                if (lp->rxdma != -1) {
2017                        SMC_DMA_FREE(dev, lp->rxdma);
2018                }
2019                if (lp->txdma != -1) {
2020                        SMC_DMA_FREE(dev, lp->txdma);
2021                }
2022        }
2023#endif
2024        return retval;
2025}
2026
2027/*
2028 * smc911x_init(void)
2029 *
2030 *        Output:
2031 *       0 --> there is a device
2032 *       anything else, error
2033 */
2034static int smc911x_drv_probe(struct platform_device *pdev)
2035{
2036        struct net_device *ndev;
2037        struct resource *res;
2038        struct smc911x_local *lp;
2039        void __iomem *addr;
2040        int ret;
2041
2042        DBG(SMC_DEBUG_FUNC, "--> %s\n",  __func__);
2043        res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
2044        if (!res) {
2045                ret = -ENODEV;
2046                goto out;
2047        }
2048
2049        /*
2050         * Request the regions.
2051         */
2052        if (!request_mem_region(res->start, SMC911X_IO_EXTENT, CARDNAME)) {
2053                 ret = -EBUSY;
2054                 goto out;
2055        }
2056
2057        ndev = alloc_etherdev(sizeof(struct smc911x_local));
2058        if (!ndev) {
2059                ret = -ENOMEM;
2060                goto release_1;
2061        }
2062        SET_NETDEV_DEV(ndev, &pdev->dev);
2063
2064        ndev->dma = (unsigned char)-1;
2065        ndev->irq = platform_get_irq(pdev, 0);
2066        lp = netdev_priv(ndev);
2067        lp->netdev = ndev;
2068#ifdef SMC_DYNAMIC_BUS_CONFIG
2069        {
2070                struct smc911x_platdata *pd = pdev->dev.platform_data;
2071                if (!pd) {
2072                        ret = -EINVAL;
2073                        goto release_both;
2074                }
2075                memcpy(&lp->cfg, pd, sizeof(lp->cfg));
2076        }
2077#endif
2078
2079        addr = ioremap(res->start, SMC911X_IO_EXTENT);
2080        if (!addr) {
2081                ret = -ENOMEM;
2082                goto release_both;
2083        }
2084
2085        platform_set_drvdata(pdev, ndev);
2086        lp->base = addr;
2087        ndev->base_addr = res->start;
2088        ret = smc911x_probe(ndev);
2089        if (ret != 0) {
2090                platform_set_drvdata(pdev, NULL);
2091                iounmap(addr);
2092release_both:
2093                free_netdev(ndev);
2094release_1:
2095                release_mem_region(res->start, SMC911X_IO_EXTENT);
2096out:
2097                printk("%s: not found (%d).\n", CARDNAME, ret);
2098        }
2099#ifdef SMC_USE_DMA
2100        else {
2101                lp->physaddr = res->start;
2102                lp->dev = &pdev->dev;
2103        }
2104#endif
2105
2106        return ret;
2107}
2108
2109static int smc911x_drv_remove(struct platform_device *pdev)
2110{
2111        struct net_device *ndev = platform_get_drvdata(pdev);
2112        struct smc911x_local *lp = netdev_priv(ndev);
2113        struct resource *res;
2114
2115        DBG(SMC_DEBUG_FUNC, "--> %s\n", __func__);
2116        platform_set_drvdata(pdev, NULL);
2117
2118        unregister_netdev(ndev);
2119
2120        free_irq(ndev->irq, ndev);
2121
2122#ifdef SMC_USE_DMA
2123        {
2124                if (lp->rxdma != -1) {
2125                        SMC_DMA_FREE(dev, lp->rxdma);
2126                }
2127                if (lp->txdma != -1) {
2128                        SMC_DMA_FREE(dev, lp->txdma);
2129                }
2130        }
2131#endif
2132        iounmap(lp->base);
2133        res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
2134        release_mem_region(res->start, SMC911X_IO_EXTENT);
2135
2136        free_netdev(ndev);
2137        return 0;
2138}
2139
2140static int smc911x_drv_suspend(struct platform_device *dev, pm_message_t state)
2141{
2142        struct net_device *ndev = platform_get_drvdata(dev);
2143        struct smc911x_local *lp = netdev_priv(ndev);
2144
2145        DBG(SMC_DEBUG_FUNC, "--> %s\n", __func__);
2146        if (ndev) {
2147                if (netif_running(ndev)) {
2148                        netif_device_detach(ndev);
2149                        smc911x_shutdown(ndev);
2150#if POWER_DOWN
2151                        /* Set D2 - Energy detect only setting */
2152                        SMC_SET_PMT_CTRL(lp, 2<<12);
2153#endif
2154                }
2155        }
2156        return 0;
2157}
2158
2159static int smc911x_drv_resume(struct platform_device *dev)
2160{
2161        struct net_device *ndev = platform_get_drvdata(dev);
2162
2163        DBG(SMC_DEBUG_FUNC, "--> %s\n", __func__);
2164        if (ndev) {
2165                struct smc911x_local *lp = netdev_priv(ndev);
2166
2167                if (netif_running(ndev)) {
2168                        smc911x_reset(ndev);
2169                        if (lp->phy_type != 0)
2170                                smc911x_phy_configure(&lp->phy_configure);
2171                        smc911x_enable(ndev);
2172                        netif_device_attach(ndev);
2173                }
2174        }
2175        return 0;
2176}
2177
2178static struct platform_driver smc911x_driver = {
2179        .probe           = smc911x_drv_probe,
2180        .remove  = smc911x_drv_remove,
2181        .suspend         = smc911x_drv_suspend,
2182        .resume  = smc911x_drv_resume,
2183        .driver  = {
2184                .name    = CARDNAME,
2185                .owner  = THIS_MODULE,
2186        },
2187};
2188
2189module_platform_driver(smc911x_driver);
2190