1/* 2 * FILE SA-1100.h 3 * 4 * Version 1.2 5 * Author Copyright (c) Marc A. Viredaz, 1998 6 * DEC Western Research Laboratory, Palo Alto, CA 7 * Date January 1998 (April 1997) 8 * System StrongARM SA-1100 9 * Language C or ARM Assembly 10 * Purpose Definition of constants related to the StrongARM 11 * SA-1100 microprocessor (Advanced RISC Machine (ARM) 12 * architecture version 4). This file is based on the 13 * StrongARM SA-1100 data sheet version 2.2. 14 * 15 */ 16 17 18/* Be sure that virtual mapping is defined right */ 19#ifndef __ASM_ARCH_HARDWARE_H 20#error You must include hardware.h not SA-1100.h 21#endif 22 23#include "bitfield.h" 24 25/* 26 * SA1100 CS line to physical address 27 */ 28 29#define SA1100_CS0_PHYS 0x00000000 30#define SA1100_CS1_PHYS 0x08000000 31#define SA1100_CS2_PHYS 0x10000000 32#define SA1100_CS3_PHYS 0x18000000 33#define SA1100_CS4_PHYS 0x40000000 34#define SA1100_CS5_PHYS 0x48000000 35 36/* 37 * Personal Computer Memory Card International Association (PCMCIA) sockets 38 */ 39 40#define PCMCIAPrtSp 0x04000000 /* PCMCIA Partition Space [byte] */ 41#define PCMCIASp (4*PCMCIAPrtSp) /* PCMCIA Space [byte] */ 42#define PCMCIAIOSp PCMCIAPrtSp /* PCMCIA I/O Space [byte] */ 43#define PCMCIAAttrSp PCMCIAPrtSp /* PCMCIA Attribute Space [byte] */ 44#define PCMCIAMemSp PCMCIAPrtSp /* PCMCIA Memory Space [byte] */ 45 46#define PCMCIA0Sp PCMCIASp /* PCMCIA 0 Space [byte] */ 47#define PCMCIA0IOSp PCMCIAIOSp /* PCMCIA 0 I/O Space [byte] */ 48#define PCMCIA0AttrSp PCMCIAAttrSp /* PCMCIA 0 Attribute Space [byte] */ 49#define PCMCIA0MemSp PCMCIAMemSp /* PCMCIA 0 Memory Space [byte] */ 50 51#define PCMCIA1Sp PCMCIASp /* PCMCIA 1 Space [byte] */ 52#define PCMCIA1IOSp PCMCIAIOSp /* PCMCIA 1 I/O Space [byte] */ 53#define PCMCIA1AttrSp PCMCIAAttrSp /* PCMCIA 1 Attribute Space [byte] */ 54#define PCMCIA1MemSp PCMCIAMemSp /* PCMCIA 1 Memory Space [byte] */ 55 56#define _PCMCIA(Nb) /* PCMCIA [0..1] */ \ 57 (0x20000000 + (Nb)*PCMCIASp) 58#define _PCMCIAIO(Nb) _PCMCIA (Nb) /* PCMCIA I/O [0..1] */ 59#define _PCMCIAAttr(Nb) /* PCMCIA Attribute [0..1] */ \ 60 (_PCMCIA (Nb) + 2*PCMCIAPrtSp) 61#define _PCMCIAMem(Nb) /* PCMCIA Memory [0..1] */ \ 62 (_PCMCIA (Nb) + 3*PCMCIAPrtSp) 63 64#define _PCMCIA0 _PCMCIA (0) /* PCMCIA 0 */ 65#define _PCMCIA0IO _PCMCIAIO (0) /* PCMCIA 0 I/O */ 66#define _PCMCIA0Attr _PCMCIAAttr (0) /* PCMCIA 0 Attribute */ 67#define _PCMCIA0Mem _PCMCIAMem (0) /* PCMCIA 0 Memory */ 68 69#define _PCMCIA1 _PCMCIA (1) /* PCMCIA 1 */ 70#define _PCMCIA1IO _PCMCIAIO (1) /* PCMCIA 1 I/O */ 71#define _PCMCIA1Attr _PCMCIAAttr (1) /* PCMCIA 1 Attribute */ 72#define _PCMCIA1Mem _PCMCIAMem (1) /* PCMCIA 1 Memory */ 73 74 75/* 76 * Universal Serial Bus (USB) Device Controller (UDC) control registers 77 * 78 * Registers 79 * Ser0UDCCR Serial port 0 Universal Serial Bus (USB) Device 80 * Controller (UDC) Control Register (read/write). 81 * Ser0UDCAR Serial port 0 Universal Serial Bus (USB) Device 82 * Controller (UDC) Address Register (read/write). 83 * Ser0UDCOMP Serial port 0 Universal Serial Bus (USB) Device 84 * Controller (UDC) Output Maximum Packet size register 85 * (read/write). 86 * Ser0UDCIMP Serial port 0 Universal Serial Bus (USB) Device 87 * Controller (UDC) Input Maximum Packet size register 88 * (read/write). 89 * Ser0UDCCS0 Serial port 0 Universal Serial Bus (USB) Device 90 * Controller (UDC) Control/Status register end-point 0 91 * (read/write). 92 * Ser0UDCCS1 Serial port 0 Universal Serial Bus (USB) Device 93 * Controller (UDC) Control/Status register end-point 1 94 * (output, read/write). 95 * Ser0UDCCS2 Serial port 0 Universal Serial Bus (USB) Device 96 * Controller (UDC) Control/Status register end-point 2 97 * (input, read/write). 98 * Ser0UDCD0 Serial port 0 Universal Serial Bus (USB) Device 99 * Controller (UDC) Data register end-point 0 100 * (read/write). 101 * Ser0UDCWC Serial port 0 Universal Serial Bus (USB) Device 102 * Controller (UDC) Write Count register end-point 0 103 * (read). 104 * Ser0UDCDR Serial port 0 Universal Serial Bus (USB) Device 105 * Controller (UDC) Data Register (read/write). 106 * Ser0UDCSR Serial port 0 Universal Serial Bus (USB) Device 107 * Controller (UDC) Status Register (read/write). 108 */ 109 110#define Ser0UDCCR __REG(0x80000000) /* Ser. port 0 UDC Control Reg. */ 111#define Ser0UDCAR __REG(0x80000004) /* Ser. port 0 UDC Address Reg. */ 112#define Ser0UDCOMP __REG(0x80000008) /* Ser. port 0 UDC Output Maximum Packet size reg. */ 113#define Ser0UDCIMP __REG(0x8000000C) /* Ser. port 0 UDC Input Maximum Packet size reg. */ 114#define Ser0UDCCS0 __REG(0x80000010) /* Ser. port 0 UDC Control/Status reg. end-point 0 */ 115#define Ser0UDCCS1 __REG(0x80000014) /* Ser. port 0 UDC Control/Status reg. end-point 1 (output) */ 116#define Ser0UDCCS2 __REG(0x80000018) /* Ser. port 0 UDC Control/Status reg. end-point 2 (input) */ 117#define Ser0UDCD0 __REG(0x8000001C) /* Ser. port 0 UDC Data reg. end-point 0 */ 118#define Ser0UDCWC __REG(0x80000020) /* Ser. port 0 UDC Write Count reg. end-point 0 */ 119#define Ser0UDCDR __REG(0x80000028) /* Ser. port 0 UDC Data Reg. */ 120#define Ser0UDCSR __REG(0x80000030) /* Ser. port 0 UDC Status Reg. */ 121 122#define UDCCR_UDD 0x00000001 /* UDC Disable */ 123#define UDCCR_UDA 0x00000002 /* UDC Active (read) */ 124#define UDCCR_RESIM 0x00000004 /* Resume Interrupt Mask, per errata */ 125#define UDCCR_EIM 0x00000008 /* End-point 0 Interrupt Mask */ 126 /* (disable) */ 127#define UDCCR_RIM 0x00000010 /* Receive Interrupt Mask */ 128 /* (disable) */ 129#define UDCCR_TIM 0x00000020 /* Transmit Interrupt Mask */ 130 /* (disable) */ 131#define UDCCR_SRM 0x00000040 /* Suspend/Resume interrupt Mask */ 132 /* (disable) */ 133#define UDCCR_SUSIM UDCCR_SRM /* Per errata, SRM just masks suspend */ 134#define UDCCR_REM 0x00000080 /* REset interrupt Mask (disable) */ 135 136#define UDCAR_ADD Fld (7, 0) /* function ADDress */ 137 138#define UDCOMP_OUTMAXP Fld (8, 0) /* OUTput MAXimum Packet size - 1 */ 139 /* [byte] */ 140#define UDCOMP_OutMaxPkt(Size) /* Output Maximum Packet size */ \ 141 /* [1..256 byte] */ \ 142 (((Size) - 1) << FShft (UDCOMP_OUTMAXP)) 143 144#define UDCIMP_INMAXP Fld (8, 0) /* INput MAXimum Packet size - 1 */ 145 /* [byte] */ 146#define UDCIMP_InMaxPkt(Size) /* Input Maximum Packet size */ \ 147 /* [1..256 byte] */ \ 148 (((Size) - 1) << FShft (UDCIMP_INMAXP)) 149 150#define UDCCS0_OPR 0x00000001 /* Output Packet Ready (read) */ 151#define UDCCS0_IPR 0x00000002 /* Input Packet Ready */ 152#define UDCCS0_SST 0x00000004 /* Sent STall */ 153#define UDCCS0_FST 0x00000008 /* Force STall */ 154#define UDCCS0_DE 0x00000010 /* Data End */ 155#define UDCCS0_SE 0x00000020 /* Setup End (read) */ 156#define UDCCS0_SO 0x00000040 /* Serviced Output packet ready */ 157 /* (write) */ 158#define UDCCS0_SSE 0x00000080 /* Serviced Setup End (write) */ 159 160#define UDCCS1_RFS 0x00000001 /* Receive FIFO 12-bytes or more */ 161 /* Service request (read) */ 162#define UDCCS1_RPC 0x00000002 /* Receive Packet Complete */ 163#define UDCCS1_RPE 0x00000004 /* Receive Packet Error (read) */ 164#define UDCCS1_SST 0x00000008 /* Sent STall */ 165#define UDCCS1_FST 0x00000010 /* Force STall */ 166#define UDCCS1_RNE 0x00000020 /* Receive FIFO Not Empty (read) */ 167 168#define UDCCS2_TFS 0x00000001 /* Transmit FIFO 8-bytes or less */ 169 /* Service request (read) */ 170#define UDCCS2_TPC 0x00000002 /* Transmit Packet Complete */ 171#define UDCCS2_TPE 0x00000004 /* Transmit Packet Error (read) */ 172#define UDCCS2_TUR 0x00000008 /* Transmit FIFO Under-Run */ 173#define UDCCS2_SST 0x00000010 /* Sent STall */ 174#define UDCCS2_FST 0x00000020 /* Force STall */ 175 176#define UDCD0_DATA Fld (8, 0) /* receive/transmit DATA FIFOs */ 177 178#define UDCWC_WC Fld (4, 0) /* Write Count */ 179 180#define UDCDR_DATA Fld (8, 0) /* receive/transmit DATA FIFOs */ 181 182#define UDCSR_EIR 0x00000001 /* End-point 0 Interrupt Request */ 183#define UDCSR_RIR 0x00000002 /* Receive Interrupt Request */ 184#define UDCSR_TIR 0x00000004 /* Transmit Interrupt Request */ 185#define UDCSR_SUSIR 0x00000008 /* SUSpend Interrupt Request */ 186#define UDCSR_RESIR 0x00000010 /* RESume Interrupt Request */ 187#define UDCSR_RSTIR 0x00000020 /* ReSeT Interrupt Request */ 188 189 190/* 191 * Universal Asynchronous Receiver/Transmitter (UART) control registers 192 * 193 * Registers 194 * Ser1UTCR0 Serial port 1 Universal Asynchronous 195 * Receiver/Transmitter (UART) Control Register 0 196 * (read/write). 197 * Ser1UTCR1 Serial port 1 Universal Asynchronous 198 * Receiver/Transmitter (UART) Control Register 1 199 * (read/write). 200 * Ser1UTCR2 Serial port 1 Universal Asynchronous 201 * Receiver/Transmitter (UART) Control Register 2 202 * (read/write). 203 * Ser1UTCR3 Serial port 1 Universal Asynchronous 204 * Receiver/Transmitter (UART) Control Register 3 205 * (read/write). 206 * Ser1UTDR Serial port 1 Universal Asynchronous 207 * Receiver/Transmitter (UART) Data Register 208 * (read/write). 209 * Ser1UTSR0 Serial port 1 Universal Asynchronous 210 * Receiver/Transmitter (UART) Status Register 0 211 * (read/write). 212 * Ser1UTSR1 Serial port 1 Universal Asynchronous 213 * Receiver/Transmitter (UART) Status Register 1 (read). 214 * 215 * Ser2UTCR0 Serial port 2 Universal Asynchronous 216 * Receiver/Transmitter (UART) Control Register 0 217 * (read/write). 218 * Ser2UTCR1 Serial port 2 Universal Asynchronous 219 * Receiver/Transmitter (UART) Control Register 1 220 * (read/write). 221 * Ser2UTCR2 Serial port 2 Universal Asynchronous 222 * Receiver/Transmitter (UART) Control Register 2 223 * (read/write). 224 * Ser2UTCR3 Serial port 2 Universal Asynchronous 225 * Receiver/Transmitter (UART) Control Register 3 226 * (read/write). 227 * Ser2UTCR4 Serial port 2 Universal Asynchronous 228 * Receiver/Transmitter (UART) Control Register 4 229 * (read/write). 230 * Ser2UTDR Serial port 2 Universal Asynchronous 231 * Receiver/Transmitter (UART) Data Register 232 * (read/write). 233 * Ser2UTSR0 Serial port 2 Universal Asynchronous 234 * Receiver/Transmitter (UART) Status Register 0 235 * (read/write). 236 * Ser2UTSR1 Serial port 2 Universal Asynchronous 237 * Receiver/Transmitter (UART) Status Register 1 (read). 238 * 239 * Ser3UTCR0 Serial port 3 Universal Asynchronous 240 * Receiver/Transmitter (UART) Control Register 0 241 * (read/write). 242 * Ser3UTCR1 Serial port 3 Universal Asynchronous 243 * Receiver/Transmitter (UART) Control Register 1 244 * (read/write). 245 * Ser3UTCR2 Serial port 3 Universal Asynchronous 246 * Receiver/Transmitter (UART) Control Register 2 247 * (read/write). 248 * Ser3UTCR3 Serial port 3 Universal Asynchronous 249 * Receiver/Transmitter (UART) Control Register 3 250 * (read/write). 251 * Ser3UTDR Serial port 3 Universal Asynchronous 252 * Receiver/Transmitter (UART) Data Register 253 * (read/write). 254 * Ser3UTSR0 Serial port 3 Universal Asynchronous 255 * Receiver/Transmitter (UART) Status Register 0 256 * (read/write). 257 * Ser3UTSR1 Serial port 3 Universal Asynchronous 258 * Receiver/Transmitter (UART) Status Register 1 (read). 259 * 260 * Clocks 261 * fxtl, Txtl Frequency, period of the system crystal (3.6864 MHz 262 * or 3.5795 MHz). 263 * fua, Tua Frequency, period of the UART communication. 264 */ 265 266#define _UTCR0(Nb) __REG(0x80010000 + ((Nb) - 1)*0x00020000) /* UART Control Reg. 0 [1..3] */ 267#define _UTCR1(Nb) __REG(0x80010004 + ((Nb) - 1)*0x00020000) /* UART Control Reg. 1 [1..3] */ 268#define _UTCR2(Nb) __REG(0x80010008 + ((Nb) - 1)*0x00020000) /* UART Control Reg. 2 [1..3] */ 269#define _UTCR3(Nb) __REG(0x8001000C + ((Nb) - 1)*0x00020000) /* UART Control Reg. 3 [1..3] */ 270#define _UTCR4(Nb) __REG(0x80010010 + ((Nb) - 1)*0x00020000) /* UART Control Reg. 4 [2] */ 271#define _UTDR(Nb) __REG(0x80010014 + ((Nb) - 1)*0x00020000) /* UART Data Reg. [1..3] */ 272#define _UTSR0(Nb) __REG(0x8001001C + ((Nb) - 1)*0x00020000) /* UART Status Reg. 0 [1..3] */ 273#define _UTSR1(Nb) __REG(0x80010020 + ((Nb) - 1)*0x00020000) /* UART Status Reg. 1 [1..3] */ 274 275#define Ser1UTCR0 _UTCR0 (1) /* Ser. port 1 UART Control Reg. 0 */ 276#define Ser1UTCR1 _UTCR1 (1) /* Ser. port 1 UART Control Reg. 1 */ 277#define Ser1UTCR2 _UTCR2 (1) /* Ser. port 1 UART Control Reg. 2 */ 278#define Ser1UTCR3 _UTCR3 (1) /* Ser. port 1 UART Control Reg. 3 */ 279#define Ser1UTDR _UTDR (1) /* Ser. port 1 UART Data Reg. */ 280#define Ser1UTSR0 _UTSR0 (1) /* Ser. port 1 UART Status Reg. 0 */ 281#define Ser1UTSR1 _UTSR1 (1) /* Ser. port 1 UART Status Reg. 1 */ 282 283#define Ser2UTCR0 _UTCR0 (2) /* Ser. port 2 UART Control Reg. 0 */ 284#define Ser2UTCR1 _UTCR1 (2) /* Ser. port 2 UART Control Reg. 1 */ 285#define Ser2UTCR2 _UTCR2 (2) /* Ser. port 2 UART Control Reg. 2 */ 286#define Ser2UTCR3 _UTCR3 (2) /* Ser. port 2 UART Control Reg. 3 */ 287#define Ser2UTCR4 _UTCR4 (2) /* Ser. port 2 UART Control Reg. 4 */ 288#define Ser2UTDR _UTDR (2) /* Ser. port 2 UART Data Reg. */ 289#define Ser2UTSR0 _UTSR0 (2) /* Ser. port 2 UART Status Reg. 0 */ 290#define Ser2UTSR1 _UTSR1 (2) /* Ser. port 2 UART Status Reg. 1 */ 291 292#define Ser3UTCR0 _UTCR0 (3) /* Ser. port 3 UART Control Reg. 0 */ 293#define Ser3UTCR1 _UTCR1 (3) /* Ser. port 3 UART Control Reg. 1 */ 294#define Ser3UTCR2 _UTCR2 (3) /* Ser. port 3 UART Control Reg. 2 */ 295#define Ser3UTCR3 _UTCR3 (3) /* Ser. port 3 UART Control Reg. 3 */ 296#define Ser3UTDR _UTDR (3) /* Ser. port 3 UART Data Reg. */ 297#define Ser3UTSR0 _UTSR0 (3) /* Ser. port 3 UART Status Reg. 0 */ 298#define Ser3UTSR1 _UTSR1 (3) /* Ser. port 3 UART Status Reg. 1 */ 299 300/* Those are still used in some places */ 301#define _Ser1UTCR0 __PREG(Ser1UTCR0) 302#define _Ser2UTCR0 __PREG(Ser2UTCR0) 303#define _Ser3UTCR0 __PREG(Ser3UTCR0) 304 305/* Register offsets */ 306#define UTCR0 0x00 307#define UTCR1 0x04 308#define UTCR2 0x08 309#define UTCR3 0x0c 310#define UTDR 0x14 311#define UTSR0 0x1c 312#define UTSR1 0x20 313 314#define UTCR0_PE 0x00000001 /* Parity Enable */ 315#define UTCR0_OES 0x00000002 /* Odd/Even parity Select */ 316#define UTCR0_OddPar (UTCR0_OES*0) /* Odd Parity */ 317#define UTCR0_EvenPar (UTCR0_OES*1) /* Even Parity */ 318#define UTCR0_SBS 0x00000004 /* Stop Bit Select */ 319#define UTCR0_1StpBit (UTCR0_SBS*0) /* 1 Stop Bit per frame */ 320#define UTCR0_2StpBit (UTCR0_SBS*1) /* 2 Stop Bits per frame */ 321#define UTCR0_DSS 0x00000008 /* Data Size Select */ 322#define UTCR0_7BitData (UTCR0_DSS*0) /* 7-Bit Data */ 323#define UTCR0_8BitData (UTCR0_DSS*1) /* 8-Bit Data */ 324#define UTCR0_SCE 0x00000010 /* Sample Clock Enable */ 325 /* (ser. port 1: GPIO [18], */ 326 /* ser. port 3: GPIO [20]) */ 327#define UTCR0_RCE 0x00000020 /* Receive Clock Edge select */ 328#define UTCR0_RcRsEdg (UTCR0_RCE*0) /* Receive clock Rising-Edge */ 329#define UTCR0_RcFlEdg (UTCR0_RCE*1) /* Receive clock Falling-Edge */ 330#define UTCR0_TCE 0x00000040 /* Transmit Clock Edge select */ 331#define UTCR0_TrRsEdg (UTCR0_TCE*0) /* Transmit clock Rising-Edge */ 332#define UTCR0_TrFlEdg (UTCR0_TCE*1) /* Transmit clock Falling-Edge */ 333#define UTCR0_Ser2IrDA /* Ser. port 2 IrDA settings */ \ 334 (UTCR0_1StpBit + UTCR0_8BitData) 335 336#define UTCR1_BRD Fld (4, 0) /* Baud Rate Divisor/16 - 1 [11:8] */ 337#define UTCR2_BRD Fld (8, 0) /* Baud Rate Divisor/16 - 1 [7:0] */ 338 /* fua = fxtl/(16*(BRD[11:0] + 1)) */ 339 /* Tua = 16*(BRD [11:0] + 1)*Txtl */ 340#define UTCR1_BdRtDiv(Div) /* Baud Rate Divisor [16..65536] */ \ 341 (((Div) - 16)/16 >> FSize (UTCR2_BRD) << \ 342 FShft (UTCR1_BRD)) 343#define UTCR2_BdRtDiv(Div) /* Baud Rate Divisor [16..65536] */ \ 344 (((Div) - 16)/16 & FAlnMsk (UTCR2_BRD) << \ 345 FShft (UTCR2_BRD)) 346 /* fua = fxtl/(16*Floor (Div/16)) */ 347 /* Tua = 16*Floor (Div/16)*Txtl */ 348#define UTCR1_CeilBdRtDiv(Div) /* Ceil. of BdRtDiv [16..65536] */ \ 349 (((Div) - 1)/16 >> FSize (UTCR2_BRD) << \ 350 FShft (UTCR1_BRD)) 351#define UTCR2_CeilBdRtDiv(Div) /* Ceil. of BdRtDiv [16..65536] */ \ 352 (((Div) - 1)/16 & FAlnMsk (UTCR2_BRD) << \ 353 FShft (UTCR2_BRD)) 354 /* fua = fxtl/(16*Ceil (Div/16)) */ 355 /* Tua = 16*Ceil (Div/16)*Txtl */ 356 357#define UTCR3_RXE 0x00000001 /* Receive Enable */ 358#define UTCR3_TXE 0x00000002 /* Transmit Enable */ 359#define UTCR3_BRK 0x00000004 /* BReaK mode */ 360#define UTCR3_RIE 0x00000008 /* Receive FIFO 1/3-to-2/3-full or */ 361 /* more Interrupt Enable */ 362#define UTCR3_TIE 0x00000010 /* Transmit FIFO 1/2-full or less */ 363 /* Interrupt Enable */ 364#define UTCR3_LBM 0x00000020 /* Look-Back Mode */ 365#define UTCR3_Ser2IrDA /* Ser. port 2 IrDA settings (RIE, */ \ 366 /* TIE, LBM can be set or cleared) */ \ 367 (UTCR3_RXE + UTCR3_TXE) 368 369#define UTCR4_HSE 0x00000001 /* Hewlett-Packard Serial InfraRed */ 370 /* (HP-SIR) modulation Enable */ 371#define UTCR4_NRZ (UTCR4_HSE*0) /* Non-Return to Zero modulation */ 372#define UTCR4_HPSIR (UTCR4_HSE*1) /* HP-SIR modulation */ 373#define UTCR4_LPM 0x00000002 /* Low-Power Mode */ 374#define UTCR4_Z3_16Bit (UTCR4_LPM*0) /* Zero pulse = 3/16 Bit time */ 375#define UTCR4_Z1_6us (UTCR4_LPM*1) /* Zero pulse = 1.6 us */ 376 377#define UTDR_DATA Fld (8, 0) /* receive/transmit DATA FIFOs */ 378#if 0 /* Hidden receive FIFO bits */ 379#define UTDR_PRE 0x00000100 /* receive PaRity Error (read) */ 380#define UTDR_FRE 0x00000200 /* receive FRaming Error (read) */ 381#define UTDR_ROR 0x00000400 /* Receive FIFO Over-Run (read) */ 382#endif /* 0 */ 383 384#define UTSR0_TFS 0x00000001 /* Transmit FIFO 1/2-full or less */ 385 /* Service request (read) */ 386#define UTSR0_RFS 0x00000002 /* Receive FIFO 1/3-to-2/3-full or */ 387 /* more Service request (read) */ 388#define UTSR0_RID 0x00000004 /* Receiver IDle */ 389#define UTSR0_RBB 0x00000008 /* Receive Beginning of Break */ 390#define UTSR0_REB 0x00000010 /* Receive End of Break */ 391#define UTSR0_EIF 0x00000020 /* Error In FIFO (read) */ 392 393#define UTSR1_TBY 0x00000001 /* Transmitter BusY (read) */ 394#define UTSR1_RNE 0x00000002 /* Receive FIFO Not Empty (read) */ 395#define UTSR1_TNF 0x00000004 /* Transmit FIFO Not Full (read) */ 396#define UTSR1_PRE 0x00000008 /* receive PaRity Error (read) */ 397#define UTSR1_FRE 0x00000010 /* receive FRaming Error (read) */ 398#define UTSR1_ROR 0x00000020 /* Receive FIFO Over-Run (read) */ 399 400 401/* 402 * Synchronous Data Link Controller (SDLC) control registers 403 * 404 * Registers 405 * Ser1SDCR0 Serial port 1 Synchronous Data Link Controller (SDLC) 406 * Control Register 0 (read/write). 407 * Ser1SDCR1 Serial port 1 Synchronous Data Link Controller (SDLC) 408 * Control Register 1 (read/write). 409 * Ser1SDCR2 Serial port 1 Synchronous Data Link Controller (SDLC) 410 * Control Register 2 (read/write). 411 * Ser1SDCR3 Serial port 1 Synchronous Data Link Controller (SDLC) 412 * Control Register 3 (read/write). 413 * Ser1SDCR4 Serial port 1 Synchronous Data Link Controller (SDLC) 414 * Control Register 4 (read/write). 415 * Ser1SDDR Serial port 1 Synchronous Data Link Controller (SDLC) 416 * Data Register (read/write). 417 * Ser1SDSR0 Serial port 1 Synchronous Data Link Controller (SDLC) 418 * Status Register 0 (read/write). 419 * Ser1SDSR1 Serial port 1 Synchronous Data Link Controller (SDLC) 420 * Status Register 1 (read/write). 421 * 422 * Clocks 423 * fxtl, Txtl Frequency, period of the system crystal (3.6864 MHz 424 * or 3.5795 MHz). 425 * fsd, Tsd Frequency, period of the SDLC communication. 426 */ 427 428#define Ser1SDCR0 __REG(0x80020060) /* Ser. port 1 SDLC Control Reg. 0 */ 429#define Ser1SDCR1 __REG(0x80020064) /* Ser. port 1 SDLC Control Reg. 1 */ 430#define Ser1SDCR2 __REG(0x80020068) /* Ser. port 1 SDLC Control Reg. 2 */ 431#define Ser1SDCR3 __REG(0x8002006C) /* Ser. port 1 SDLC Control Reg. 3 */ 432#define Ser1SDCR4 __REG(0x80020070) /* Ser. port 1 SDLC Control Reg. 4 */ 433#define Ser1SDDR __REG(0x80020078) /* Ser. port 1 SDLC Data Reg. */ 434#define Ser1SDSR0 __REG(0x80020080) /* Ser. port 1 SDLC Status Reg. 0 */ 435#define Ser1SDSR1 __REG(0x80020084) /* Ser. port 1 SDLC Status Reg. 1 */ 436 437#define SDCR0_SUS 0x00000001 /* SDLC/UART Select */ 438#define SDCR0_SDLC (SDCR0_SUS*0) /* SDLC mode (TXD1 & RXD1) */ 439#define SDCR0_UART (SDCR0_SUS*1) /* UART mode (TXD1 & RXD1) */ 440#define SDCR0_SDF 0x00000002 /* Single/Double start Flag select */ 441#define SDCR0_SglFlg (SDCR0_SDF*0) /* Single start Flag */ 442#define SDCR0_DblFlg (SDCR0_SDF*1) /* Double start Flag */ 443#define SDCR0_LBM 0x00000004 /* Look-Back Mode */ 444#define SDCR0_BMS 0x00000008 /* Bit Modulation Select */ 445#define SDCR0_FM0 (SDCR0_BMS*0) /* Freq. Modulation zero (0) */ 446#define SDCR0_NRZ (SDCR0_BMS*1) /* Non-Return to Zero modulation */ 447#define SDCR0_SCE 0x00000010 /* Sample Clock Enable (GPIO [16]) */ 448#define SDCR0_SCD 0x00000020 /* Sample Clock Direction select */ 449 /* (GPIO [16]) */ 450#define SDCR0_SClkIn (SDCR0_SCD*0) /* Sample Clock Input */ 451#define SDCR0_SClkOut (SDCR0_SCD*1) /* Sample Clock Output */ 452#define SDCR0_RCE 0x00000040 /* Receive Clock Edge select */ 453#define SDCR0_RcRsEdg (SDCR0_RCE*0) /* Receive clock Rising-Edge */ 454#define SDCR0_RcFlEdg (SDCR0_RCE*1) /* Receive clock Falling-Edge */ 455#define SDCR0_TCE 0x00000080 /* Transmit Clock Edge select */ 456#define SDCR0_TrRsEdg (SDCR0_TCE*0) /* Transmit clock Rising-Edge */ 457#define SDCR0_TrFlEdg (SDCR0_TCE*1) /* Transmit clock Falling-Edge */ 458 459#define SDCR1_AAF 0x00000001 /* Abort After Frame enable */ 460 /* (GPIO [17]) */ 461#define SDCR1_TXE 0x00000002 /* Transmit Enable */ 462#define SDCR1_RXE 0x00000004 /* Receive Enable */ 463#define SDCR1_RIE 0x00000008 /* Receive FIFO 1/3-to-2/3-full or */ 464 /* more Interrupt Enable */ 465#define SDCR1_TIE 0x00000010 /* Transmit FIFO 1/2-full or less */ 466 /* Interrupt Enable */ 467#define SDCR1_AME 0x00000020 /* Address Match Enable */ 468#define SDCR1_TUS 0x00000040 /* Transmit FIFO Under-run Select */ 469#define SDCR1_EFrmURn (SDCR1_TUS*0) /* End Frame on Under-Run */ 470#define SDCR1_AbortURn (SDCR1_TUS*1) /* Abort on Under-Run */ 471#define SDCR1_RAE 0x00000080 /* Receive Abort interrupt Enable */ 472 473#define SDCR2_AMV Fld (8, 0) /* Address Match Value */ 474 475#define SDCR3_BRD Fld (4, 0) /* Baud Rate Divisor/16 - 1 [11:8] */ 476#define SDCR4_BRD Fld (8, 0) /* Baud Rate Divisor/16 - 1 [7:0] */ 477 /* fsd = fxtl/(16*(BRD[11:0] + 1)) */ 478 /* Tsd = 16*(BRD[11:0] + 1)*Txtl */ 479#define SDCR3_BdRtDiv(Div) /* Baud Rate Divisor [16..65536] */ \ 480 (((Div) - 16)/16 >> FSize (SDCR4_BRD) << \ 481 FShft (SDCR3_BRD)) 482#define SDCR4_BdRtDiv(Div) /* Baud Rate Divisor [16..65536] */ \ 483 (((Div) - 16)/16 & FAlnMsk (SDCR4_BRD) << \ 484 FShft (SDCR4_BRD)) 485 /* fsd = fxtl/(16*Floor (Div/16)) */ 486 /* Tsd = 16*Floor (Div/16)*Txtl */ 487#define SDCR3_CeilBdRtDiv(Div) /* Ceil. of BdRtDiv [16..65536] */ \ 488 (((Div) - 1)/16 >> FSize (SDCR4_BRD) << \ 489 FShft (SDCR3_BRD)) 490#define SDCR4_CeilBdRtDiv(Div) /* Ceil. of BdRtDiv [16..65536] */ \ 491 (((Div) - 1)/16 & FAlnMsk (SDCR4_BRD) << \ 492 FShft (SDCR4_BRD)) 493 /* fsd = fxtl/(16*Ceil (Div/16)) */ 494 /* Tsd = 16*Ceil (Div/16)*Txtl */ 495 496#define SDDR_DATA Fld (8, 0) /* receive/transmit DATA FIFOs */ 497#if 0 /* Hidden receive FIFO bits */ 498#define SDDR_EOF 0x00000100 /* receive End-Of-Frame (read) */ 499#define SDDR_CRE 0x00000200 /* receive CRC Error (read) */ 500#define SDDR_ROR 0x00000400 /* Receive FIFO Over-Run (read) */ 501#endif /* 0 */ 502 503#define SDSR0_EIF 0x00000001 /* Error In FIFO (read) */ 504#define SDSR0_TUR 0x00000002 /* Transmit FIFO Under-Run */ 505#define SDSR0_RAB 0x00000004 /* Receive ABort */ 506#define SDSR0_TFS 0x00000008 /* Transmit FIFO 1/2-full or less */ 507 /* Service request (read) */ 508#define SDSR0_RFS 0x00000010 /* Receive FIFO 1/3-to-2/3-full or */ 509 /* more Service request (read) */ 510 511#define SDSR1_RSY 0x00000001 /* Receiver SYnchronized (read) */ 512#define SDSR1_TBY 0x00000002 /* Transmitter BusY (read) */ 513#define SDSR1_RNE 0x00000004 /* Receive FIFO Not Empty (read) */ 514#define SDSR1_TNF 0x00000008 /* Transmit FIFO Not Full (read) */ 515#define SDSR1_RTD 0x00000010 /* Receive Transition Detected */ 516#define SDSR1_EOF 0x00000020 /* receive End-Of-Frame (read) */ 517#define SDSR1_CRE 0x00000040 /* receive CRC Error (read) */ 518#define SDSR1_ROR 0x00000080 /* Receive FIFO Over-Run (read) */ 519 520 521/* 522 * High-Speed Serial to Parallel controller (HSSP) control registers 523 * 524 * Registers 525 * Ser2HSCR0 Serial port 2 High-Speed Serial to Parallel 526 * controller (HSSP) Control Register 0 (read/write). 527 * Ser2HSCR1 Serial port 2 High-Speed Serial to Parallel 528 * controller (HSSP) Control Register 1 (read/write). 529 * Ser2HSDR Serial port 2 High-Speed Serial to Parallel 530 * controller (HSSP) Data Register (read/write). 531 * Ser2HSSR0 Serial port 2 High-Speed Serial to Parallel 532 * controller (HSSP) Status Register 0 (read/write). 533 * Ser2HSSR1 Serial port 2 High-Speed Serial to Parallel 534 * controller (HSSP) Status Register 1 (read). 535 * Ser2HSCR2 Serial port 2 High-Speed Serial to Parallel 536 * controller (HSSP) Control Register 2 (read/write). 537 * [The HSCR2 register is only implemented in 538 * versions 2.0 (rev. = 8) and higher of the StrongARM 539 * SA-1100.] 540 */ 541 542#define Ser2HSCR0 __REG(0x80040060) /* Ser. port 2 HSSP Control Reg. 0 */ 543#define Ser2HSCR1 __REG(0x80040064) /* Ser. port 2 HSSP Control Reg. 1 */ 544#define Ser2HSDR __REG(0x8004006C) /* Ser. port 2 HSSP Data Reg. */ 545#define Ser2HSSR0 __REG(0x80040074) /* Ser. port 2 HSSP Status Reg. 0 */ 546#define Ser2HSSR1 __REG(0x80040078) /* Ser. port 2 HSSP Status Reg. 1 */ 547#define Ser2HSCR2 __REG(0x90060028) /* Ser. port 2 HSSP Control Reg. 2 */ 548 549#define HSCR0_ITR 0x00000001 /* IrDA Transmission Rate */ 550#define HSCR0_UART (HSCR0_ITR*0) /* UART mode (115.2 kb/s if IrDA) */ 551#define HSCR0_HSSP (HSCR0_ITR*1) /* HSSP mode (4 Mb/s) */ 552#define HSCR0_LBM 0x00000002 /* Look-Back Mode */ 553#define HSCR0_TUS 0x00000004 /* Transmit FIFO Under-run Select */ 554#define HSCR0_EFrmURn (HSCR0_TUS*0) /* End Frame on Under-Run */ 555#define HSCR0_AbortURn (HSCR0_TUS*1) /* Abort on Under-Run */ 556#define HSCR0_TXE 0x00000008 /* Transmit Enable */ 557#define HSCR0_RXE 0x00000010 /* Receive Enable */ 558#define HSCR0_RIE 0x00000020 /* Receive FIFO 2/5-to-3/5-full or */ 559 /* more Interrupt Enable */ 560#define HSCR0_TIE 0x00000040 /* Transmit FIFO 1/2-full or less */ 561 /* Interrupt Enable */ 562#define HSCR0_AME 0x00000080 /* Address Match Enable */ 563 564#define HSCR1_AMV Fld (8, 0) /* Address Match Value */ 565 566#define HSDR_DATA Fld (8, 0) /* receive/transmit DATA FIFOs */ 567#if 0 /* Hidden receive FIFO bits */ 568#define HSDR_EOF 0x00000100 /* receive End-Of-Frame (read) */ 569#define HSDR_CRE 0x00000200 /* receive CRC Error (read) */ 570#define HSDR_ROR 0x00000400 /* Receive FIFO Over-Run (read) */ 571#endif /* 0 */ 572 573#define HSSR0_EIF 0x00000001 /* Error In FIFO (read) */ 574#define HSSR0_TUR 0x00000002 /* Transmit FIFO Under-Run */ 575#define HSSR0_RAB 0x00000004 /* Receive ABort */ 576#define HSSR0_TFS 0x00000008 /* Transmit FIFO 1/2-full or less */ 577 /* Service request (read) */ 578#define HSSR0_RFS 0x00000010 /* Receive FIFO 2/5-to-3/5-full or */ 579 /* more Service request (read) */ 580#define HSSR0_FRE 0x00000020 /* receive FRaming Error */ 581 582#define HSSR1_RSY 0x00000001 /* Receiver SYnchronized (read) */ 583#define HSSR1_TBY 0x00000002 /* Transmitter BusY (read) */ 584#define HSSR1_RNE 0x00000004 /* Receive FIFO Not Empty (read) */ 585#define HSSR1_TNF 0x00000008 /* Transmit FIFO Not Full (read) */ 586#define HSSR1_EOF 0x00000010 /* receive End-Of-Frame (read) */ 587#define HSSR1_CRE 0x00000020 /* receive CRC Error (read) */ 588#define HSSR1_ROR 0x00000040 /* Receive FIFO Over-Run (read) */ 589 590#define HSCR2_TXP 0x00040000 /* Transmit data Polarity (TXD_2) */ 591#define HSCR2_TrDataL (HSCR2_TXP*0) /* Transmit Data active Low */ 592 /* (inverted) */ 593#define HSCR2_TrDataH (HSCR2_TXP*1) /* Transmit Data active High */ 594 /* (non-inverted) */ 595#define HSCR2_RXP 0x00080000 /* Receive data Polarity (RXD_2) */ 596#define HSCR2_RcDataL (HSCR2_RXP*0) /* Receive Data active Low */ 597 /* (inverted) */ 598#define HSCR2_RcDataH (HSCR2_RXP*1) /* Receive Data active High */ 599 /* (non-inverted) */ 600 601 602/* 603 * Multi-media Communications Port (MCP) control registers 604 * 605 * Registers 606 * Ser4MCCR0 Serial port 4 Multi-media Communications Port (MCP) 607 * Control Register 0 (read/write). 608 * Ser4MCDR0 Serial port 4 Multi-media Communications Port (MCP) 609 * Data Register 0 (audio, read/write). 610 * Ser4MCDR1 Serial port 4 Multi-media Communications Port (MCP) 611 * Data Register 1 (telecom, read/write). 612 * Ser4MCDR2 Serial port 4 Multi-media Communications Port (MCP) 613 * Data Register 2 (CODEC registers, read/write). 614 * Ser4MCSR Serial port 4 Multi-media Communications Port (MCP) 615 * Status Register (read/write). 616 * Ser4MCCR1 Serial port 4 Multi-media Communications Port (MCP) 617 * Control Register 1 (read/write). 618 * [The MCCR1 register is only implemented in 619 * versions 2.0 (rev. = 8) and higher of the StrongARM 620 * SA-1100.] 621 * 622 * Clocks 623 * fmc, Tmc Frequency, period of the MCP communication (10 MHz, 624 * 12 MHz, or GPIO [21]). 625 * faud, Taud Frequency, period of the audio sampling. 626 * ftcm, Ttcm Frequency, period of the telecom sampling. 627 */ 628 629#define Ser4MCCR0 __REG(0x80060000) /* Ser. port 4 MCP Control Reg. 0 */ 630#define Ser4MCDR0 __REG(0x80060008) /* Ser. port 4 MCP Data Reg. 0 (audio) */ 631#define Ser4MCDR1 __REG(0x8006000C) /* Ser. port 4 MCP Data Reg. 1 (telecom) */ 632#define Ser4MCDR2 __REG(0x80060010) /* Ser. port 4 MCP Data Reg. 2 (CODEC reg.) */ 633#define Ser4MCSR __REG(0x80060018) /* Ser. port 4 MCP Status Reg. */ 634#define Ser4MCCR1 __REG(0x90060030) /* Ser. port 4 MCP Control Reg. 1 */ 635 636#define MCCR0_ASD Fld (7, 0) /* Audio Sampling rate Divisor/32 */ 637 /* [6..127] */ 638 /* faud = fmc/(32*ASD) */ 639 /* Taud = 32*ASD*Tmc */ 640#define MCCR0_AudSmpDiv(Div) /* Audio Sampling rate Divisor */ \ 641 /* [192..4064] */ \ 642 ((Div)/32 << FShft (MCCR0_ASD)) 643 /* faud = fmc/(32*Floor (Div/32)) */ 644 /* Taud = 32*Floor (Div/32)*Tmc */ 645#define MCCR0_CeilAudSmpDiv(Div) /* Ceil. of AudSmpDiv [192..4064] */ \ 646 (((Div) + 31)/32 << FShft (MCCR0_ASD)) 647 /* faud = fmc/(32*Ceil (Div/32)) */ 648 /* Taud = 32*Ceil (Div/32)*Tmc */ 649#define MCCR0_TSD Fld (7, 8) /* Telecom Sampling rate */ 650 /* Divisor/32 [16..127] */ 651 /* ftcm = fmc/(32*TSD) */ 652 /* Ttcm = 32*TSD*Tmc */ 653#define MCCR0_TcmSmpDiv(Div) /* Telecom Sampling rate Divisor */ \ 654 /* [512..4064] */ \ 655 ((Div)/32 << FShft (MCCR0_TSD)) 656 /* ftcm = fmc/(32*Floor (Div/32)) */ 657 /* Ttcm = 32*Floor (Div/32)*Tmc */ 658#define MCCR0_CeilTcmSmpDiv(Div) /* Ceil. of TcmSmpDiv [512..4064] */ \ 659 (((Div) + 31)/32 << FShft (MCCR0_TSD)) 660 /* ftcm = fmc/(32*Ceil (Div/32)) */ 661 /* Ttcm = 32*Ceil (Div/32)*Tmc */ 662#define MCCR0_MCE 0x00010000 /* MCP Enable */ 663#define MCCR0_ECS 0x00020000 /* External Clock Select */ 664#define MCCR0_IntClk (MCCR0_ECS*0) /* Internal Clock (10 or 12 MHz) */ 665#define MCCR0_ExtClk (MCCR0_ECS*1) /* External Clock (GPIO [21]) */ 666#define MCCR0_ADM 0x00040000 /* A/D (audio/telecom) data */ 667 /* sampling/storing Mode */ 668#define MCCR0_VldBit (MCCR0_ADM*0) /* Valid Bit storing mode */ 669#define MCCR0_SmpCnt (MCCR0_ADM*1) /* Sampling Counter storing mode */ 670#define MCCR0_TTE 0x00080000 /* Telecom Transmit FIFO 1/2-full */ 671 /* or less interrupt Enable */ 672#define MCCR0_TRE 0x00100000 /* Telecom Receive FIFO 1/2-full */ 673 /* or more interrupt Enable */ 674#define MCCR0_ATE 0x00200000 /* Audio Transmit FIFO 1/2-full */ 675 /* or less interrupt Enable */ 676#define MCCR0_ARE 0x00400000 /* Audio Receive FIFO 1/2-full or */ 677 /* more interrupt Enable */ 678#define MCCR0_LBM 0x00800000 /* Look-Back Mode */ 679#define MCCR0_ECP Fld (2, 24) /* External Clock Prescaler - 1 */ 680#define MCCR0_ExtClkDiv(Div) /* External Clock Divisor [1..4] */ \ 681 (((Div) - 1) << FShft (MCCR0_ECP)) 682 683#define MCDR0_DATA Fld (12, 4) /* receive/transmit audio DATA */ 684 /* FIFOs */ 685 686#define MCDR1_DATA Fld (14, 2) /* receive/transmit telecom DATA */ 687 /* FIFOs */ 688 689 /* receive/transmit CODEC reg. */ 690 /* FIFOs: */ 691#define MCDR2_DATA Fld (16, 0) /* reg. DATA */ 692#define MCDR2_RW 0x00010000 /* reg. Read/Write (transmit) */ 693#define MCDR2_Rd (MCDR2_RW*0) /* reg. Read */ 694#define MCDR2_Wr (MCDR2_RW*1) /* reg. Write */ 695#define MCDR2_ADD Fld (4, 17) /* reg. ADDress */ 696 697#define MCSR_ATS 0x00000001 /* Audio Transmit FIFO 1/2-full */ 698 /* or less Service request (read) */ 699#define MCSR_ARS 0x00000002 /* Audio Receive FIFO 1/2-full or */ 700 /* more Service request (read) */ 701#define MCSR_TTS 0x00000004 /* Telecom Transmit FIFO 1/2-full */ 702 /* or less Service request (read) */ 703#define MCSR_TRS 0x00000008 /* Telecom Receive FIFO 1/2-full */ 704 /* or more Service request (read) */ 705#define MCSR_ATU 0x00000010 /* Audio Transmit FIFO Under-run */ 706#define MCSR_ARO 0x00000020 /* Audio Receive FIFO Over-run */ 707#define MCSR_TTU 0x00000040 /* Telecom Transmit FIFO Under-run */ 708#define MCSR_TRO 0x00000080 /* Telecom Receive FIFO Over-run */ 709#define MCSR_ANF 0x00000100 /* Audio transmit FIFO Not Full */ 710 /* (read) */ 711#define MCSR_ANE 0x00000200 /* Audio receive FIFO Not Empty */ 712 /* (read) */ 713#define MCSR_TNF 0x00000400 /* Telecom transmit FIFO Not Full */ 714 /* (read) */ 715#define MCSR_TNE 0x00000800 /* Telecom receive FIFO Not Empty */ 716 /* (read) */ 717#define MCSR_CWC 0x00001000 /* CODEC register Write Completed */ 718 /* (read) */ 719#define MCSR_CRC 0x00002000 /* CODEC register Read Completed */ 720 /* (read) */ 721#define MCSR_ACE 0x00004000 /* Audio CODEC Enabled (read) */ 722#define MCSR_TCE 0x00008000 /* Telecom CODEC Enabled (read) */ 723 724#define MCCR1_CFS 0x00100000 /* Clock Freq. Select */ 725#define MCCR1_F12MHz (MCCR1_CFS*0) /* Freq. (fmc) = ~ 12 MHz */ 726 /* (11.981 MHz) */ 727#define MCCR1_F10MHz (MCCR1_CFS*1) /* Freq. (fmc) = ~ 10 MHz */ 728 /* (9.585 MHz) */ 729 730 731/* 732 * Synchronous Serial Port (SSP) control registers 733 * 734 * Registers 735 * Ser4SSCR0 Serial port 4 Synchronous Serial Port (SSP) Control 736 * Register 0 (read/write). 737 * Ser4SSCR1 Serial port 4 Synchronous Serial Port (SSP) Control 738 * Register 1 (read/write). 739 * [Bits SPO and SP are only implemented in versions 2.0 740 * (rev. = 8) and higher of the StrongARM SA-1100.] 741 * Ser4SSDR Serial port 4 Synchronous Serial Port (SSP) Data 742 * Register (read/write). 743 * Ser4SSSR Serial port 4 Synchronous Serial Port (SSP) Status 744 * Register (read/write). 745 * 746 * Clocks 747 * fxtl, Txtl Frequency, period of the system crystal (3.6864 MHz 748 * or 3.5795 MHz). 749 * fss, Tss Frequency, period of the SSP communication. 750 */ 751 752#define Ser4SSCR0 __REG(0x80070060) /* Ser. port 4 SSP Control Reg. 0 */ 753#define Ser4SSCR1 __REG(0x80070064) /* Ser. port 4 SSP Control Reg. 1 */ 754#define Ser4SSDR __REG(0x8007006C) /* Ser. port 4 SSP Data Reg. */ 755#define Ser4SSSR __REG(0x80070074) /* Ser. port 4 SSP Status Reg. */ 756 757#define SSCR0_DSS Fld (4, 0) /* Data Size - 1 Select [3..15] */ 758#define SSCR0_DataSize(Size) /* Data Size Select [4..16] */ \ 759 (((Size) - 1) << FShft (SSCR0_DSS)) 760#define SSCR0_FRF Fld (2, 4) /* FRame Format */ 761#define SSCR0_Motorola /* Motorola Serial Peripheral */ \ 762 /* Interface (SPI) format */ \ 763 (0 << FShft (SSCR0_FRF)) 764#define SSCR0_TI /* Texas Instruments Synchronous */ \ 765 /* Serial format */ \ 766 (1 << FShft (SSCR0_FRF)) 767#define SSCR0_National /* National Microwire format */ \ 768 (2 << FShft (SSCR0_FRF)) 769#define SSCR0_SSE 0x00000080 /* SSP Enable */ 770#define SSCR0_SCR Fld (8, 8) /* Serial Clock Rate divisor/2 - 1 */ 771 /* fss = fxtl/(2*(SCR + 1)) */ 772 /* Tss = 2*(SCR + 1)*Txtl */ 773#define SSCR0_SerClkDiv(Div) /* Serial Clock Divisor [2..512] */ \ 774 (((Div) - 2)/2 << FShft (SSCR0_SCR)) 775 /* fss = fxtl/(2*Floor (Div/2)) */ 776 /* Tss = 2*Floor (Div/2)*Txtl */ 777#define SSCR0_CeilSerClkDiv(Div) /* Ceil. of SerClkDiv [2..512] */ \ 778 (((Div) - 1)/2 << FShft (SSCR0_SCR)) 779 /* fss = fxtl/(2*Ceil (Div/2)) */ 780 /* Tss = 2*Ceil (Div/2)*Txtl */ 781 782#define SSCR1_RIE 0x00000001 /* Receive FIFO 1/2-full or more */ 783 /* Interrupt Enable */ 784#define SSCR1_TIE 0x00000002 /* Transmit FIFO 1/2-full or less */ 785 /* Interrupt Enable */ 786#define SSCR1_LBM 0x00000004 /* Look-Back Mode */ 787#define SSCR1_SPO 0x00000008 /* Sample clock (SCLK) POlarity */ 788#define SSCR1_SClkIactL (SSCR1_SPO*0) /* Sample Clock Inactive Low */ 789#define SSCR1_SClkIactH (SSCR1_SPO*1) /* Sample Clock Inactive High */ 790#define SSCR1_SP 0x00000010 /* Sample clock (SCLK) Phase */ 791#define SSCR1_SClk1P (SSCR1_SP*0) /* Sample Clock active 1 Period */ 792 /* after frame (SFRM, 1st edge) */ 793#define SSCR1_SClk1_2P (SSCR1_SP*1) /* Sample Clock active 1/2 Period */ 794 /* after frame (SFRM, 1st edge) */ 795#define SSCR1_ECS 0x00000020 /* External Clock Select */ 796#define SSCR1_IntClk (SSCR1_ECS*0) /* Internal Clock */ 797#define SSCR1_ExtClk (SSCR1_ECS*1) /* External Clock (GPIO [19]) */ 798 799#define SSDR_DATA Fld (16, 0) /* receive/transmit DATA FIFOs */ 800 801#define SSSR_TNF 0x00000002 /* Transmit FIFO Not Full (read) */ 802#define SSSR_RNE 0x00000004 /* Receive FIFO Not Empty (read) */ 803#define SSSR_BSY 0x00000008 /* SSP BuSY (read) */ 804#define SSSR_TFS 0x00000010 /* Transmit FIFO 1/2-full or less */ 805 /* Service request (read) */ 806#define SSSR_RFS 0x00000020 /* Receive FIFO 1/2-full or more */ 807 /* Service request (read) */ 808#define SSSR_ROR 0x00000040 /* Receive FIFO Over-Run */ 809 810 811/* 812 * Operating System (OS) timer control registers 813 * 814 * Registers 815 * OSMR0 Operating System (OS) timer Match Register 0 816 * (read/write). 817 * OSMR1 Operating System (OS) timer Match Register 1 818 * (read/write). 819 * OSMR2 Operating System (OS) timer Match Register 2 820 * (read/write). 821 * OSMR3 Operating System (OS) timer Match Register 3 822 * (read/write). 823 * OSCR Operating System (OS) timer Counter Register 824 * (read/write). 825 * OSSR Operating System (OS) timer Status Register 826 * (read/write). 827 * OWER Operating System (OS) timer Watch-dog Enable Register 828 * (read/write). 829 * OIER Operating System (OS) timer Interrupt Enable Register 830 * (read/write). 831 */ 832 833#define OSMR0 io_p2v(0x90000000) /* OS timer Match Reg. 0 */ 834#define OSMR1 io_p2v(0x90000004) /* OS timer Match Reg. 1 */ 835#define OSMR2 io_p2v(0x90000008) /* OS timer Match Reg. 2 */ 836#define OSMR3 io_p2v(0x9000000c) /* OS timer Match Reg. 3 */ 837#define OSCR io_p2v(0x90000010) /* OS timer Counter Reg. */ 838#define OSSR io_p2v(0x90000014) /* OS timer Status Reg. */ 839#define OWER io_p2v(0x90000018) /* OS timer Watch-dog Enable Reg. */ 840#define OIER io_p2v(0x9000001C) /* OS timer Interrupt Enable Reg. */ 841 842#define OSSR_M(Nb) /* Match detected [0..3] */ \ 843 (0x00000001 << (Nb)) 844#define OSSR_M0 OSSR_M (0) /* Match detected 0 */ 845#define OSSR_M1 OSSR_M (1) /* Match detected 1 */ 846#define OSSR_M2 OSSR_M (2) /* Match detected 2 */ 847#define OSSR_M3 OSSR_M (3) /* Match detected 3 */ 848 849#define OWER_WME 0x00000001 /* Watch-dog Match Enable */ 850 /* (set only) */ 851 852#define OIER_E(Nb) /* match interrupt Enable [0..3] */ \ 853 (0x00000001 << (Nb)) 854#define OIER_E0 OIER_E (0) /* match interrupt Enable 0 */ 855#define OIER_E1 OIER_E (1) /* match interrupt Enable 1 */ 856#define OIER_E2 OIER_E (2) /* match interrupt Enable 2 */ 857#define OIER_E3 OIER_E (3) /* match interrupt Enable 3 */ 858 859 860/* 861 * Real-Time Clock (RTC) control registers 862 * 863 * Registers 864 * RTAR Real-Time Clock (RTC) Alarm Register (read/write). 865 * RCNR Real-Time Clock (RTC) CouNt Register (read/write). 866 * RTTR Real-Time Clock (RTC) Trim Register (read/write). 867 * RTSR Real-Time Clock (RTC) Status Register (read/write). 868 * 869 * Clocks 870 * frtx, Trtx Frequency, period of the real-time clock crystal 871 * (32.768 kHz nominal). 872 * frtc, Trtc Frequency, period of the real-time clock counter 873 * (1 Hz nominal). 874 */ 875 876#define RTAR __REG(0x90010000) /* RTC Alarm Reg. */ 877#define RCNR __REG(0x90010004) /* RTC CouNt Reg. */ 878#define RTTR __REG(0x90010008) /* RTC Trim Reg. */ 879#define RTSR __REG(0x90010010) /* RTC Status Reg. */ 880 881#define RTTR_C Fld (16, 0) /* clock divider Count - 1 */ 882#define RTTR_D Fld (10, 16) /* trim Delete count */ 883 /* frtc = (1023*(C + 1) - D)*frtx/ */ 884 /* (1023*(C + 1)^2) */ 885 /* Trtc = (1023*(C + 1)^2)*Trtx/ */ 886 /* (1023*(C + 1) - D) */ 887 888#define RTSR_AL 0x00000001 /* ALarm detected */ 889#define RTSR_HZ 0x00000002 /* 1 Hz clock detected */ 890#define RTSR_ALE 0x00000004 /* ALarm interrupt Enable */ 891#define RTSR_HZE 0x00000008 /* 1 Hz clock interrupt Enable */ 892 893 894/* 895 * Power Manager (PM) control registers 896 * 897 * Registers 898 * PMCR Power Manager (PM) Control Register (read/write). 899 * PSSR Power Manager (PM) Sleep Status Register (read/write). 900 * PSPR Power Manager (PM) Scratch-Pad Register (read/write). 901 * PWER Power Manager (PM) Wake-up Enable Register 902 * (read/write). 903 * PCFR Power Manager (PM) general ConFiguration Register 904 * (read/write). 905 * PPCR Power Manager (PM) Phase-Locked Loop (PLL) 906 * Configuration Register (read/write). 907 * PGSR Power Manager (PM) General-Purpose Input/Output (GPIO) 908 * Sleep state Register (read/write, see GPIO pins). 909 * POSR Power Manager (PM) Oscillator Status Register (read). 910 * 911 * Clocks 912 * fxtl, Txtl Frequency, period of the system crystal (3.6864 MHz 913 * or 3.5795 MHz). 914 * fcpu, Tcpu Frequency, period of the CPU core clock (CCLK). 915 */ 916 917#define PMCR __REG(0x90020000) /* PM Control Reg. */ 918#define PSSR __REG(0x90020004) /* PM Sleep Status Reg. */ 919#define PSPR __REG(0x90020008) /* PM Scratch-Pad Reg. */ 920#define PWER __REG(0x9002000C) /* PM Wake-up Enable Reg. */ 921#define PCFR __REG(0x90020010) /* PM general ConFiguration Reg. */ 922#define PPCR __REG(0x90020014) /* PM PLL Configuration Reg. */ 923#define PGSR __REG(0x90020018) /* PM GPIO Sleep state Reg. */ 924#define POSR __REG(0x9002001C) /* PM Oscillator Status Reg. */ 925 926#define PMCR_SF 0x00000001 /* Sleep Force (set only) */ 927 928#define PSSR_SS 0x00000001 /* Software Sleep */ 929#define PSSR_BFS 0x00000002 /* Battery Fault Status */ 930 /* (BATT_FAULT) */ 931#define PSSR_VFS 0x00000004 /* Vdd Fault Status (VDD_FAULT) */ 932#define PSSR_DH 0x00000008 /* DRAM control Hold */ 933#define PSSR_PH 0x00000010 /* Peripheral control Hold */ 934 935#define PWER_GPIO(Nb) GPIO_GPIO (Nb) /* GPIO [0..27] wake-up enable */ 936#define PWER_GPIO0 PWER_GPIO (0) /* GPIO [0] wake-up enable */ 937#define PWER_GPIO1 PWER_GPIO (1) /* GPIO [1] wake-up enable */ 938#define PWER_GPIO2 PWER_GPIO (2) /* GPIO [2] wake-up enable */ 939#define PWER_GPIO3 PWER_GPIO (3) /* GPIO [3] wake-up enable */ 940#define PWER_GPIO4 PWER_GPIO (4) /* GPIO [4] wake-up enable */ 941#define PWER_GPIO5 PWER_GPIO (5) /* GPIO [5] wake-up enable */ 942#define PWER_GPIO6 PWER_GPIO (6) /* GPIO [6] wake-up enable */ 943#define PWER_GPIO7 PWER_GPIO (7) /* GPIO [7] wake-up enable */ 944#define PWER_GPIO8 PWER_GPIO (8) /* GPIO [8] wake-up enable */ 945#define PWER_GPIO9 PWER_GPIO (9) /* GPIO [9] wake-up enable */ 946#define PWER_GPIO10 PWER_GPIO (10) /* GPIO [10] wake-up enable */ 947#define PWER_GPIO11 PWER_GPIO (11) /* GPIO [11] wake-up enable */ 948#define PWER_GPIO12 PWER_GPIO (12) /* GPIO [12] wake-up enable */ 949#define PWER_GPIO13 PWER_GPIO (13) /* GPIO [13] wake-up enable */ 950#define PWER_GPIO14 PWER_GPIO (14) /* GPIO [14] wake-up enable */ 951#define PWER_GPIO15 PWER_GPIO (15) /* GPIO [15] wake-up enable */ 952#define PWER_GPIO16 PWER_GPIO (16) /* GPIO [16] wake-up enable */ 953#define PWER_GPIO17 PWER_GPIO (17) /* GPIO [17] wake-up enable */ 954#define PWER_GPIO18 PWER_GPIO (18) /* GPIO [18] wake-up enable */ 955#define PWER_GPIO19 PWER_GPIO (19) /* GPIO [19] wake-up enable */ 956#define PWER_GPIO20 PWER_GPIO (20) /* GPIO [20] wake-up enable */ 957#define PWER_GPIO21 PWER_GPIO (21) /* GPIO [21] wake-up enable */ 958#define PWER_GPIO22 PWER_GPIO (22) /* GPIO [22] wake-up enable */ 959#define PWER_GPIO23 PWER_GPIO (23) /* GPIO [23] wake-up enable */ 960#define PWER_GPIO24 PWER_GPIO (24) /* GPIO [24] wake-up enable */ 961#define PWER_GPIO25 PWER_GPIO (25) /* GPIO [25] wake-up enable */ 962#define PWER_GPIO26 PWER_GPIO (26) /* GPIO [26] wake-up enable */ 963#define PWER_GPIO27 PWER_GPIO (27) /* GPIO [27] wake-up enable */ 964#define PWER_RTC 0x80000000 /* RTC alarm wake-up enable */ 965 966#define PCFR_OPDE 0x00000001 /* Oscillator Power-Down Enable */ 967#define PCFR_ClkRun (PCFR_OPDE*0) /* Clock Running in sleep mode */ 968#define PCFR_ClkStp (PCFR_OPDE*1) /* Clock Stopped in sleep mode */ 969#define PCFR_FP 0x00000002 /* Float PCMCIA pins */ 970#define PCFR_PCMCIANeg (PCFR_FP*0) /* PCMCIA pins Negated (1) */ 971#define PCFR_PCMCIAFlt (PCFR_FP*1) /* PCMCIA pins Floating */ 972#define PCFR_FS 0x00000004 /* Float Static memory pins */ 973#define PCFR_StMemNeg (PCFR_FS*0) /* Static Memory pins Negated (1) */ 974#define PCFR_StMemFlt (PCFR_FS*1) /* Static Memory pins Floating */ 975#define PCFR_FO 0x00000008 /* Force RTC oscillator */ 976 /* (32.768 kHz) enable On */ 977 978#define PPCR_CCF Fld (5, 0) /* CPU core Clock (CCLK) Freq. */ 979#define PPCR_Fx16 /* Freq. x 16 (fcpu = 16*fxtl) */ \ 980 (0x00 << FShft (PPCR_CCF)) 981#define PPCR_Fx20 /* Freq. x 20 (fcpu = 20*fxtl) */ \ 982 (0x01 << FShft (PPCR_CCF)) 983#define PPCR_Fx24 /* Freq. x 24 (fcpu = 24*fxtl) */ \ 984 (0x02 << FShft (PPCR_CCF)) 985#define PPCR_Fx28 /* Freq. x 28 (fcpu = 28*fxtl) */ \ 986 (0x03 << FShft (PPCR_CCF)) 987#define PPCR_Fx32 /* Freq. x 32 (fcpu = 32*fxtl) */ \ 988 (0x04 << FShft (PPCR_CCF)) 989#define PPCR_Fx36 /* Freq. x 36 (fcpu = 36*fxtl) */ \ 990 (0x05 << FShft (PPCR_CCF)) 991#define PPCR_Fx40 /* Freq. x 40 (fcpu = 40*fxtl) */ \ 992 (0x06 << FShft (PPCR_CCF)) 993#define PPCR_Fx44 /* Freq. x 44 (fcpu = 44*fxtl) */ \ 994 (0x07 << FShft (PPCR_CCF)) 995#define PPCR_Fx48 /* Freq. x 48 (fcpu = 48*fxtl) */ \ 996 (0x08 << FShft (PPCR_CCF)) 997#define PPCR_Fx52 /* Freq. x 52 (fcpu = 52*fxtl) */ \ 998 (0x09 << FShft (PPCR_CCF)) 999#define PPCR_Fx56 /* Freq. x 56 (fcpu = 56*fxtl) */ \ 1000 (0x0A << FShft (PPCR_CCF))
1001#define PPCR_Fx60 /* Freq. x 60 (fcpu = 60*fxtl) */ \ 1002 (0x0B << FShft (PPCR_CCF)) 1003#define PPCR_Fx64 /* Freq. x 64 (fcpu = 64*fxtl) */ \ 1004 (0x0C << FShft (PPCR_CCF)) 1005#define PPCR_Fx68 /* Freq. x 68 (fcpu = 68*fxtl) */ \ 1006 (0x0D << FShft (PPCR_CCF)) 1007#define PPCR_Fx72 /* Freq. x 72 (fcpu = 72*fxtl) */ \ 1008 (0x0E << FShft (PPCR_CCF)) 1009#define PPCR_Fx76 /* Freq. x 76 (fcpu = 76*fxtl) */ \ 1010 (0x0F << FShft (PPCR_CCF)) 1011 /* 3.6864 MHz crystal (fxtl): */ 1012#define PPCR_F59_0MHz PPCR_Fx16 /* Freq. (fcpu) = 59.0 MHz */ 1013#define PPCR_F73_7MHz PPCR_Fx20 /* Freq. (fcpu) = 73.7 MHz */ 1014#define PPCR_F88_5MHz PPCR_Fx24 /* Freq. (fcpu) = 88.5 MHz */ 1015#define PPCR_F103_2MHz PPCR_Fx28 /* Freq. (fcpu) = 103.2 MHz */ 1016#define PPCR_F118_0MHz PPCR_Fx32 /* Freq. (fcpu) = 118.0 MHz */ 1017#define PPCR_F132_7MHz PPCR_Fx36 /* Freq. (fcpu) = 132.7 MHz */ 1018#define PPCR_F147_5MHz PPCR_Fx40 /* Freq. (fcpu) = 147.5 MHz */ 1019#define PPCR_F162_2MHz PPCR_Fx44 /* Freq. (fcpu) = 162.2 MHz */ 1020#define PPCR_F176_9MHz PPCR_Fx48 /* Freq. (fcpu) = 176.9 MHz */ 1021#define PPCR_F191_7MHz PPCR_Fx52 /* Freq. (fcpu) = 191.7 MHz */ 1022#define PPCR_F206_4MHz PPCR_Fx56 /* Freq. (fcpu) = 206.4 MHz */ 1023#define PPCR_F221_2MHz PPCR_Fx60 /* Freq. (fcpu) = 221.2 MHz */ 1024#define PPCR_F239_6MHz PPCR_Fx64 /* Freq. (fcpu) = 239.6 MHz */ 1025#define PPCR_F250_7MHz PPCR_Fx68 /* Freq. (fcpu) = 250.7 MHz */ 1026#define PPCR_F265_4MHz PPCR_Fx72 /* Freq. (fcpu) = 265.4 MHz */ 1027#define PPCR_F280_2MHz PPCR_Fx76 /* Freq. (fcpu) = 280.2 MHz */ 1028 /* 3.5795 MHz crystal (fxtl): */ 1029#define PPCR_F57_3MHz PPCR_Fx16 /* Freq. (fcpu) = 57.3 MHz */ 1030#define PPCR_F71_6MHz PPCR_Fx20 /* Freq. (fcpu) = 71.6 MHz */ 1031#define PPCR_F85_9MHz PPCR_Fx24 /* Freq. (fcpu) = 85.9 MHz */ 1032#define PPCR_F100_2MHz PPCR_Fx28 /* Freq. (fcpu) = 100.2 MHz */ 1033#define PPCR_F114_5MHz PPCR_Fx32 /* Freq. (fcpu) = 114.5 MHz */ 1034#define PPCR_F128_9MHz PPCR_Fx36 /* Freq. (fcpu) = 128.9 MHz */ 1035#define PPCR_F143_2MHz PPCR_Fx40 /* Freq. (fcpu) = 143.2 MHz */ 1036#define PPCR_F157_5MHz PPCR_Fx44 /* Freq. (fcpu) = 157.5 MHz */ 1037#define PPCR_F171_8MHz PPCR_Fx48 /* Freq. (fcpu) = 171.8 MHz */ 1038#define PPCR_F186_1MHz PPCR_Fx52 /* Freq. (fcpu) = 186.1 MHz */ 1039#define PPCR_F200_5MHz PPCR_Fx56 /* Freq. (fcpu) = 200.5 MHz */ 1040#define PPCR_F214_8MHz PPCR_Fx60 /* Freq. (fcpu) = 214.8 MHz */ 1041#define PPCR_F229_1MHz PPCR_Fx64 /* Freq. (fcpu) = 229.1 MHz */ 1042#define PPCR_F243_4MHz PPCR_Fx68 /* Freq. (fcpu) = 243.4 MHz */ 1043#define PPCR_F257_7MHz PPCR_Fx72 /* Freq. (fcpu) = 257.7 MHz */ 1044#define PPCR_F272_0MHz PPCR_Fx76 /* Freq. (fcpu) = 272.0 MHz */ 1045 1046#define POSR_OOK 0x00000001 /* RTC Oscillator (32.768 kHz) OK */ 1047 1048 1049/* 1050 * Reset Controller (RC) control registers 1051 * 1052 * Registers 1053 * RSRR Reset Controller (RC) Software Reset Register 1054 * (read/write). 1055 * RCSR Reset Controller (RC) Status Register (read/write). 1056 */ 1057 1058#define RSRR __REG(0x90030000) /* RC Software Reset Reg. */ 1059#define RCSR __REG(0x90030004) /* RC Status Reg. */ 1060 1061#define RSRR_SWR 0x00000001 /* SoftWare Reset (set only) */ 1062 1063#define RCSR_HWR 0x00000001 /* HardWare Reset */ 1064#define RCSR_SWR 0x00000002 /* SoftWare Reset */ 1065#define RCSR_WDR 0x00000004 /* Watch-Dog Reset */ 1066#define RCSR_SMR 0x00000008 /* Sleep-Mode Reset */ 1067 1068 1069/* 1070 * Test unit control registers 1071 * 1072 * Registers 1073 * TUCR Test Unit Control Register (read/write). 1074 */ 1075 1076#define TUCR __REG(0x90030008) /* Test Unit Control Reg. */ 1077 1078#define TUCR_TIC 0x00000040 /* TIC mode */ 1079#define TUCR_TTST 0x00000080 /* Trim TeST mode */ 1080#define TUCR_RCRC 0x00000100 /* Richard's Cyclic Redundancy */ 1081 /* Check */ 1082#define TUCR_PMD 0x00000200 /* Power Management Disable */ 1083#define TUCR_MR 0x00000400 /* Memory Request mode */ 1084#define TUCR_NoMB (TUCR_MR*0) /* No Memory Bus request & grant */ 1085#define TUCR_MBGPIO (TUCR_MR*1) /* Memory Bus request (MBREQ) & */ 1086 /* grant (MBGNT) on GPIO [22:21] */ 1087#define TUCR_CTB Fld (3, 20) /* Clock Test Bits */ 1088#define TUCR_FDC 0x00800000 /* RTC Force Delete Count */ 1089#define TUCR_FMC 0x01000000 /* Force Michelle's Control mode */ 1090#define TUCR_TMC 0x02000000 /* RTC Trimmer Multiplexer Control */ 1091#define TUCR_DPS 0x04000000 /* Disallow Pad Sleep */ 1092#define TUCR_TSEL Fld (3, 29) /* clock Test SELect on GPIO [27] */ 1093#define TUCR_32_768kHz /* 32.768 kHz osc. on GPIO [27] */ \ 1094 (0 << FShft (TUCR_TSEL)) 1095#define TUCR_3_6864MHz /* 3.6864 MHz osc. on GPIO [27] */ \ 1096 (1 << FShft (TUCR_TSEL)) 1097#define TUCR_VDD /* VDD ring osc./16 on GPIO [27] */ \ 1098 (2 << FShft (TUCR_TSEL)) 1099#define TUCR_96MHzPLL /* 96 MHz PLL/4 on GPIO [27] */ \ 1100 (3 << FShft (TUCR_TSEL)) 1101#define TUCR_Clock /* internal (fcpu/2) & 32.768 kHz */ \ 1102 /* Clocks on GPIO [26:27] */ \ 1103 (4 << FShft (TUCR_TSEL)) 1104#define TUCR_3_6864MHzA /* 3.6864 MHz osc. on GPIO [27] */ \ 1105 /* (Alternative) */ \ 1106 (5 << FShft (TUCR_TSEL)) 1107#define TUCR_MainPLL /* Main PLL/16 on GPIO [27] */ \ 1108 (6 << FShft (TUCR_TSEL)) 1109#define TUCR_VDDL /* VDDL ring osc./4 on GPIO [27] */ \ 1110 (7 << FShft (TUCR_TSEL)) 1111 1112 1113/* 1114 * General-Purpose Input/Output (GPIO) control registers 1115 * 1116 * Registers 1117 * GPLR General-Purpose Input/Output (GPIO) Pin Level 1118 * Register (read). 1119 * GPDR General-Purpose Input/Output (GPIO) Pin Direction 1120 * Register (read/write). 1121 * GPSR General-Purpose Input/Output (GPIO) Pin output Set 1122 * Register (write). 1123 * GPCR General-Purpose Input/Output (GPIO) Pin output Clear 1124 * Register (write). 1125 * GRER General-Purpose Input/Output (GPIO) Rising-Edge 1126 * detect Register (read/write). 1127 * GFER General-Purpose Input/Output (GPIO) Falling-Edge 1128 * detect Register (read/write). 1129 * GEDR General-Purpose Input/Output (GPIO) Edge Detect 1130 * status Register (read/write). 1131 * GAFR General-Purpose Input/Output (GPIO) Alternate 1132 * Function Register (read/write). 1133 * 1134 * Clock 1135 * fcpu, Tcpu Frequency, period of the CPU core clock (CCLK). 1136 */ 1137 1138#define GPLR __REG(0x90040000) /* GPIO Pin Level Reg. */ 1139#define GPDR __REG(0x90040004) /* GPIO Pin Direction Reg. */ 1140#define GPSR __REG(0x90040008) /* GPIO Pin output Set Reg. */ 1141#define GPCR __REG(0x9004000C) /* GPIO Pin output Clear Reg. */ 1142#define GRER __REG(0x90040010) /* GPIO Rising-Edge detect Reg. */ 1143#define GFER __REG(0x90040014) /* GPIO Falling-Edge detect Reg. */ 1144#define GEDR __REG(0x90040018) /* GPIO Edge Detect status Reg. */ 1145#define GAFR __REG(0x9004001C) /* GPIO Alternate Function Reg. */ 1146 1147#define GPIO_MIN (0) 1148#define GPIO_MAX (27) 1149 1150#define GPIO_GPIO(Nb) /* GPIO [0..27] */ \ 1151 (0x00000001 << (Nb)) 1152#define GPIO_GPIO0 GPIO_GPIO (0) /* GPIO [0] */ 1153#define GPIO_GPIO1 GPIO_GPIO (1) /* GPIO [1] */ 1154#define GPIO_GPIO2 GPIO_GPIO (2) /* GPIO [2] */ 1155#define GPIO_GPIO3 GPIO_GPIO (3) /* GPIO [3] */ 1156#define GPIO_GPIO4 GPIO_GPIO (4) /* GPIO [4] */ 1157#define GPIO_GPIO5 GPIO_GPIO (5) /* GPIO [5] */ 1158#define GPIO_GPIO6 GPIO_GPIO (6) /* GPIO [6] */ 1159#define GPIO_GPIO7 GPIO_GPIO (7) /* GPIO [7] */ 1160#define GPIO_GPIO8 GPIO_GPIO (8) /* GPIO [8] */ 1161#define GPIO_GPIO9 GPIO_GPIO (9) /* GPIO [9] */ 1162#define GPIO_GPIO10 GPIO_GPIO (10) /* GPIO [10] */ 1163#define GPIO_GPIO11 GPIO_GPIO (11) /* GPIO [11] */ 1164#define GPIO_GPIO12 GPIO_GPIO (12) /* GPIO [12] */ 1165#define GPIO_GPIO13 GPIO_GPIO (13) /* GPIO [13] */ 1166#define GPIO_GPIO14 GPIO_GPIO (14) /* GPIO [14] */ 1167#define GPIO_GPIO15 GPIO_GPIO (15) /* GPIO [15] */ 1168#define GPIO_GPIO16 GPIO_GPIO (16) /* GPIO [16] */ 1169#define GPIO_GPIO17 GPIO_GPIO (17) /* GPIO [17] */ 1170#define GPIO_GPIO18 GPIO_GPIO (18) /* GPIO [18] */ 1171#define GPIO_GPIO19 GPIO_GPIO (19) /* GPIO [19] */ 1172#define GPIO_GPIO20 GPIO_GPIO (20) /* GPIO [20] */ 1173#define GPIO_GPIO21 GPIO_GPIO (21) /* GPIO [21] */ 1174#define GPIO_GPIO22 GPIO_GPIO (22) /* GPIO [22] */ 1175#define GPIO_GPIO23 GPIO_GPIO (23) /* GPIO [23] */ 1176#define GPIO_GPIO24 GPIO_GPIO (24) /* GPIO [24] */ 1177#define GPIO_GPIO25 GPIO_GPIO (25) /* GPIO [25] */ 1178#define GPIO_GPIO26 GPIO_GPIO (26) /* GPIO [26] */ 1179#define GPIO_GPIO27 GPIO_GPIO (27) /* GPIO [27] */ 1180 1181#define GPIO_LDD(Nb) /* LCD Data [8..15] (O) */ \ 1182 GPIO_GPIO ((Nb) - 6) 1183#define GPIO_LDD8 GPIO_LDD (8) /* LCD Data [8] (O) */ 1184#define GPIO_LDD9 GPIO_LDD (9) /* LCD Data [9] (O) */ 1185#define GPIO_LDD10 GPIO_LDD (10) /* LCD Data [10] (O) */ 1186#define GPIO_LDD11 GPIO_LDD (11) /* LCD Data [11] (O) */ 1187#define GPIO_LDD12 GPIO_LDD (12) /* LCD Data [12] (O) */ 1188#define GPIO_LDD13 GPIO_LDD (13) /* LCD Data [13] (O) */ 1189#define GPIO_LDD14 GPIO_LDD (14) /* LCD Data [14] (O) */ 1190#define GPIO_LDD15 GPIO_LDD (15) /* LCD Data [15] (O) */ 1191 /* ser. port 4: */ 1192#define GPIO_SSP_TXD GPIO_GPIO (10) /* SSP Transmit Data (O) */ 1193#define GPIO_SSP_RXD GPIO_GPIO (11) /* SSP Receive Data (I) */ 1194#define GPIO_SSP_SCLK GPIO_GPIO (12) /* SSP Sample CLocK (O) */ 1195#define GPIO_SSP_SFRM GPIO_GPIO (13) /* SSP Sample FRaMe (O) */ 1196 /* ser. port 1: */ 1197#define GPIO_UART_TXD GPIO_GPIO (14) /* UART Transmit Data (O) */ 1198#define GPIO_UART_RXD GPIO_GPIO (15) /* UART Receive Data (I) */ 1199#define GPIO_SDLC_SCLK GPIO_GPIO (16) /* SDLC Sample CLocK (I/O) */ 1200#define GPIO_SDLC_AAF GPIO_GPIO (17) /* SDLC Abort After Frame (O) */ 1201#define GPIO_UART_SCLK1 GPIO_GPIO (18) /* UART Sample CLocK 1 (I) */ 1202 /* ser. port 4: */ 1203#define GPIO_SSP_CLK GPIO_GPIO (19) /* SSP external CLocK (I) */ 1204 /* ser. port 3: */ 1205#define GPIO_UART_SCLK3 GPIO_GPIO (20) /* UART Sample CLocK 3 (I) */ 1206 /* ser. port 4: */ 1207#define GPIO_MCP_CLK GPIO_GPIO (21) /* MCP CLocK (I) */ 1208 /* test controller: */ 1209#define GPIO_TIC_ACK GPIO_GPIO (21) /* TIC ACKnowledge (O) */ 1210#define GPIO_MBGNT GPIO_GPIO (21) /* Memory Bus GraNT (O) */ 1211#define GPIO_TREQA GPIO_GPIO (22) /* TIC REQuest A (I) */ 1212#define GPIO_MBREQ GPIO_GPIO (22) /* Memory Bus REQuest (I) */ 1213#define GPIO_TREQB GPIO_GPIO (23) /* TIC REQuest B (I) */ 1214#define GPIO_1Hz GPIO_GPIO (25) /* 1 Hz clock (O) */ 1215#define GPIO_RCLK GPIO_GPIO (26) /* internal (R) CLocK (O, fcpu/2) */ 1216#define GPIO_32_768kHz GPIO_GPIO (27) /* 32.768 kHz clock (O, RTC) */ 1217 1218#define GPDR_In 0 /* Input */ 1219#define GPDR_Out 1 /* Output */ 1220 1221 1222/* 1223 * Interrupt Controller (IC) control registers 1224 * 1225 * Registers 1226 * ICIP Interrupt Controller (IC) Interrupt ReQuest (IRQ) 1227 * Pending register (read). 1228 * ICMR Interrupt Controller (IC) Mask Register (read/write). 1229 * ICLR Interrupt Controller (IC) Level Register (read/write). 1230 * ICCR Interrupt Controller (IC) Control Register 1231 * (read/write). 1232 * [The ICCR register is only implemented in versions 2.0 1233 * (rev. = 8) and higher of the StrongARM SA-1100.] 1234 * ICFP Interrupt Controller (IC) Fast Interrupt reQuest 1235 * (FIQ) Pending register (read). 1236 * ICPR Interrupt Controller (IC) Pending Register (read). 1237 * [The ICPR register is active low (inverted) in 1238 * versions 1.0 (rev. = 1) and 1.1 (rev. = 2) of the 1239 * StrongARM SA-1100, it is active high (non-inverted) in 1240 * versions 2.0 (rev. = 8) and higher.] 1241 */ 1242 1243#define ICIP __REG(0x90050000) /* IC IRQ Pending reg. */ 1244#define ICMR __REG(0x90050004) /* IC Mask Reg. */ 1245#define ICLR __REG(0x90050008) /* IC Level Reg. */ 1246#define ICCR __REG(0x9005000C) /* IC Control Reg. */ 1247#define ICFP __REG(0x90050010) /* IC FIQ Pending reg. */ 1248#define ICPR __REG(0x90050020) /* IC Pending Reg. */ 1249 1250#define IC_GPIO(Nb) /* GPIO [0..10] */ \ 1251 (0x00000001 << (Nb)) 1252#define IC_GPIO0 IC_GPIO (0) /* GPIO [0] */ 1253#define IC_GPIO1 IC_GPIO (1) /* GPIO [1] */ 1254#define IC_GPIO2 IC_GPIO (2) /* GPIO [2] */ 1255#define IC_GPIO3 IC_GPIO (3) /* GPIO [3] */ 1256#define IC_GPIO4 IC_GPIO (4) /* GPIO [4] */ 1257#define IC_GPIO5 IC_GPIO (5) /* GPIO [5] */ 1258#define IC_GPIO6 IC_GPIO (6) /* GPIO [6] */ 1259#define IC_GPIO7 IC_GPIO (7) /* GPIO [7] */ 1260#define IC_GPIO8 IC_GPIO (8) /* GPIO [8] */ 1261#define IC_GPIO9 IC_GPIO (9) /* GPIO [9] */ 1262#define IC_GPIO10 IC_GPIO (10) /* GPIO [10] */ 1263#define IC_GPIO11_27 0x00000800 /* GPIO [11:27] (ORed) */ 1264#define IC_LCD 0x00001000 /* LCD controller */ 1265#define IC_Ser0UDC 0x00002000 /* Ser. port 0 UDC */ 1266#define IC_Ser1SDLC 0x00004000 /* Ser. port 1 SDLC */ 1267#define IC_Ser1UART 0x00008000 /* Ser. port 1 UART */ 1268#define IC_Ser2ICP 0x00010000 /* Ser. port 2 ICP */ 1269#define IC_Ser3UART 0x00020000 /* Ser. port 3 UART */ 1270#define IC_Ser4MCP 0x00040000 /* Ser. port 4 MCP */ 1271#define IC_Ser4SSP 0x00080000 /* Ser. port 4 SSP */ 1272#define IC_DMA(Nb) /* DMA controller channel [0..5] */ \ 1273 (0x00100000 << (Nb)) 1274#define IC_DMA0 IC_DMA (0) /* DMA controller channel 0 */ 1275#define IC_DMA1 IC_DMA (1) /* DMA controller channel 1 */ 1276#define IC_DMA2 IC_DMA (2) /* DMA controller channel 2 */ 1277#define IC_DMA3 IC_DMA (3) /* DMA controller channel 3 */ 1278#define IC_DMA4 IC_DMA (4) /* DMA controller channel 4 */ 1279#define IC_DMA5 IC_DMA (5) /* DMA controller channel 5 */ 1280#define IC_OST(Nb) /* OS Timer match [0..3] */ \ 1281 (0x04000000 << (Nb)) 1282#define IC_OST0 IC_OST (0) /* OS Timer match 0 */ 1283#define IC_OST1 IC_OST (1) /* OS Timer match 1 */ 1284#define IC_OST2 IC_OST (2) /* OS Timer match 2 */ 1285#define IC_OST3 IC_OST (3) /* OS Timer match 3 */ 1286#define IC_RTC1Hz 0x40000000 /* RTC 1 Hz clock */ 1287#define IC_RTCAlrm 0x80000000 /* RTC Alarm */ 1288 1289#define ICLR_IRQ 0 /* Interrupt ReQuest */ 1290#define ICLR_FIQ 1 /* Fast Interrupt reQuest */ 1291 1292#define ICCR_DIM 0x00000001 /* Disable Idle-mode interrupt */ 1293 /* Mask */ 1294#define ICCR_IdleAllInt (ICCR_DIM*0) /* Idle-mode All Interrupt enable */ 1295 /* (ICMR ignored) */ 1296#define ICCR_IdleMskInt (ICCR_DIM*1) /* Idle-mode non-Masked Interrupt */ 1297 /* enable (ICMR used) */ 1298 1299 1300/* 1301 * Peripheral Pin Controller (PPC) control registers 1302 * 1303 * Registers 1304 * PPDR Peripheral Pin Controller (PPC) Pin Direction 1305 * Register (read/write). 1306 * PPSR Peripheral Pin Controller (PPC) Pin State Register 1307 * (read/write). 1308 * PPAR Peripheral Pin Controller (PPC) Pin Assignment 1309 * Register (read/write). 1310 * PSDR Peripheral Pin Controller (PPC) Sleep-mode pin 1311 * Direction Register (read/write). 1312 * PPFR Peripheral Pin Controller (PPC) Pin Flag Register 1313 * (read). 1314 */ 1315 1316#define PPDR __REG(0x90060000) /* PPC Pin Direction Reg. */ 1317#define PPSR __REG(0x90060004) /* PPC Pin State Reg. */ 1318#define PPAR __REG(0x90060008) /* PPC Pin Assignment Reg. */ 1319#define PSDR __REG(0x9006000C) /* PPC Sleep-mode pin Direction Reg. */ 1320#define PPFR __REG(0x90060010) /* PPC Pin Flag Reg. */ 1321 1322#define PPC_LDD(Nb) /* LCD Data [0..7] */ \ 1323 (0x00000001 << (Nb)) 1324#define PPC_LDD0 PPC_LDD (0) /* LCD Data [0] */ 1325#define PPC_LDD1 PPC_LDD (1) /* LCD Data [1] */ 1326#define PPC_LDD2 PPC_LDD (2) /* LCD Data [2] */ 1327#define PPC_LDD3 PPC_LDD (3) /* LCD Data [3] */ 1328#define PPC_LDD4 PPC_LDD (4) /* LCD Data [4] */ 1329#define PPC_LDD5 PPC_LDD (5) /* LCD Data [5] */ 1330#define PPC_LDD6 PPC_LDD (6) /* LCD Data [6] */ 1331#define PPC_LDD7 PPC_LDD (7) /* LCD Data [7] */ 1332#define PPC_L_PCLK 0x00000100 /* LCD Pixel CLocK */ 1333#define PPC_L_LCLK 0x00000200 /* LCD Line CLocK */ 1334#define PPC_L_FCLK 0x00000400 /* LCD Frame CLocK */ 1335#define PPC_L_BIAS 0x00000800 /* LCD AC BIAS */ 1336 /* ser. port 1: */ 1337#define PPC_TXD1 0x00001000 /* SDLC/UART Transmit Data 1 */ 1338#define PPC_RXD1 0x00002000 /* SDLC/UART Receive Data 1 */ 1339 /* ser. port 2: */ 1340#define PPC_TXD2 0x00004000 /* IPC Transmit Data 2 */ 1341#define PPC_RXD2 0x00008000 /* IPC Receive Data 2 */ 1342 /* ser. port 3: */ 1343#define PPC_TXD3 0x00010000 /* UART Transmit Data 3 */ 1344#define PPC_RXD3 0x00020000 /* UART Receive Data 3 */ 1345 /* ser. port 4: */ 1346#define PPC_TXD4 0x00040000 /* MCP/SSP Transmit Data 4 */ 1347#define PPC_RXD4 0x00080000 /* MCP/SSP Receive Data 4 */ 1348#define PPC_SCLK 0x00100000 /* MCP/SSP Sample CLocK */ 1349#define PPC_SFRM 0x00200000 /* MCP/SSP Sample FRaMe */ 1350 1351#define PPDR_In 0 /* Input */ 1352#define PPDR_Out 1 /* Output */ 1353 1354 /* ser. port 1: */ 1355#define PPAR_UPR 0x00001000 /* UART Pin Reassignment */ 1356#define PPAR_UARTTR (PPAR_UPR*0) /* UART on TXD_1 & RXD_1 */ 1357#define PPAR_UARTGPIO (PPAR_UPR*1) /* UART on GPIO [14:15] */ 1358 /* ser. port 4: */ 1359#define PPAR_SPR 0x00040000 /* SSP Pin Reassignment */ 1360#define PPAR_SSPTRSS (PPAR_SPR*0) /* SSP on TXD_C, RXD_C, SCLK_C, */ 1361 /* & SFRM_C */ 1362#define PPAR_SSPGPIO (PPAR_SPR*1) /* SSP on GPIO [10:13] */ 1363 1364#define PSDR_OutL 0 /* Output Low in sleep mode */ 1365#define PSDR_Flt 1 /* Floating (input) in sleep mode */ 1366 1367#define PPFR_LCD 0x00000001 /* LCD controller */ 1368#define PPFR_SP1TX 0x00001000 /* Ser. Port 1 SDLC/UART Transmit */ 1369#define PPFR_SP1RX 0x00002000 /* Ser. Port 1 SDLC/UART Receive */ 1370#define PPFR_SP2TX 0x00004000 /* Ser. Port 2 ICP Transmit */ 1371#define PPFR_SP2RX 0x00008000 /* Ser. Port 2 ICP Receive */ 1372#define PPFR_SP3TX 0x00010000 /* Ser. Port 3 UART Transmit */ 1373#define PPFR_SP3RX 0x00020000 /* Ser. Port 3 UART Receive */ 1374#define PPFR_SP4 0x00040000 /* Ser. Port 4 MCP/SSP */ 1375#define PPFR_PerEn 0 /* Peripheral Enabled */ 1376#define PPFR_PPCEn 1 /* PPC Enabled */ 1377 1378 1379/* 1380 * Dynamic Random-Access Memory (DRAM) control registers 1381 * 1382 * Registers 1383 * MDCNFG Memory system: Dynamic Random-Access Memory (DRAM) 1384 * CoNFiGuration register (read/write). 1385 * MDCAS0 Memory system: Dynamic Random-Access Memory (DRAM) 1386 * Column Address Strobe (CAS) shift register 0 1387 * (read/write). 1388 * MDCAS1 Memory system: Dynamic Random-Access Memory (DRAM) 1389 * Column Address Strobe (CAS) shift register 1 1390 * (read/write). 1391 * MDCAS2 Memory system: Dynamic Random-Access Memory (DRAM) 1392 * Column Address Strobe (CAS) shift register 2 1393 * (read/write). 1394 * 1395 * Clocks 1396 * fcpu, Tcpu Frequency, period of the CPU core clock (CCLK). 1397 * fmem, Tmem Frequency, period of the memory clock (fmem = fcpu/2). 1398 * fcas, Tcas Frequency, period of the DRAM CAS shift registers. 1399 */ 1400 1401#define MDCNFG __REG(0xA0000000) /* DRAM CoNFiGuration reg. */ 1402#define MDCAS0 __REG(0xA0000004) /* DRAM CAS shift reg. 0 */ 1403#define MDCAS1 __REG(0xA0000008) /* DRAM CAS shift reg. 1 */ 1404#define MDCAS2 __REG(0xA000000c) /* DRAM CAS shift reg. 2 */ 1405 1406/* SA1100 MDCNFG values */ 1407#define MDCNFG_DE(Nb) /* DRAM Enable bank [0..3] */ \ 1408 (0x00000001 << (Nb)) 1409#define MDCNFG_DE0 MDCNFG_DE (0) /* DRAM Enable bank 0 */ 1410#define MDCNFG_DE1 MDCNFG_DE (1) /* DRAM Enable bank 1 */ 1411#define MDCNFG_DE2 MDCNFG_DE (2) /* DRAM Enable bank 2 */ 1412#define MDCNFG_DE3 MDCNFG_DE (3) /* DRAM Enable bank 3 */ 1413#define MDCNFG_DRAC Fld (2, 4) /* DRAM Row Address Count - 9 */ 1414#define MDCNFG_RowAdd(Add) /* Row Address count [9..12] */ \ 1415 (((Add) - 9) << FShft (MDCNFG_DRAC)) 1416#define MDCNFG_CDB2 0x00000040 /* shift reg. Clock Divide By 2 */ 1417 /* (fcas = fcpu/2) */ 1418#define MDCNFG_TRP Fld (4, 7) /* Time RAS Pre-charge - 1 [Tmem] */ 1419#define MDCNFG_PrChrg(Tcpu) /* Pre-Charge time [2..32 Tcpu] */ \ 1420 (((Tcpu) - 2)/2 << FShft (MDCNFG_TRP)) 1421#define MDCNFG_CeilPrChrg(Tcpu) /* Ceil. of PrChrg [2..32 Tcpu] */ \ 1422 (((Tcpu) - 1)/2 << FShft (MDCNFG_TRP)) 1423#define MDCNFG_TRASR Fld (4, 11) /* Time RAS Refresh - 1 [Tmem] */ 1424#define MDCNFG_Ref(Tcpu) /* Refresh time [2..32 Tcpu] */ \ 1425 (((Tcpu) - 2)/2 << FShft (MDCNFG_TRASR)) 1426#define MDCNFG_CeilRef(Tcpu) /* Ceil. of Ref [2..32 Tcpu] */ \ 1427 (((Tcpu) - 1)/2 << FShft (MDCNFG_TRASR)) 1428#define MDCNFG_TDL Fld (2, 15) /* Time Data Latch [Tcpu] */ 1429#define MDCNFG_DataLtch(Tcpu) /* Data Latch delay [0..3 Tcpu] */ \ 1430 ((Tcpu) << FShft (MDCNFG_TDL)) 1431#define MDCNFG_DRI Fld (15, 17) /* min. DRAM Refresh Interval/4 */ 1432 /* [Tmem] */ 1433#define MDCNFG_RefInt(Tcpu) /* min. Refresh Interval */ \ 1434 /* [0..262136 Tcpu] */ \ 1435 ((Tcpu)/8 << FShft (MDCNFG_DRI)) 1436 1437/* SA1110 MDCNFG values */ 1438#define MDCNFG_SA1110_DE0 0x00000001 /* DRAM Enable bank 0 */ 1439#define MDCNFG_SA1110_DE1 0x00000002 /* DRAM Enable bank 1 */ 1440#define MDCNFG_SA1110_DTIM0 0x00000004 /* DRAM timing type 0/1 */ 1441#define MDCNFG_SA1110_DWID0 0x00000008 /* DRAM bus width 0/1 */ 1442#define MDCNFG_SA1110_DRAC0 Fld(3, 4) /* DRAM row addr bit count */ 1443 /* bank 0/1 */ 1444#define MDCNFG_SA1110_CDB20 0x00000080 /* Mem Clock divide by 2 0/1 */ 1445#define MDCNFG_SA1110_TRP0 Fld(3, 8) /* RAS precharge 0/1 */ 1446#define MDCNFG_SA1110_TDL0 Fld(2, 12) /* Data input latch after CAS*/ 1447 /* deassertion 0/1 */ 1448#define MDCNFG_SA1110_TWR0 Fld(2, 14) /* SDRAM write recovery 0/1 */ 1449#define MDCNFG_SA1110_DE2 0x00010000 /* DRAM Enable bank 0 */ 1450#define MDCNFG_SA1110_DE3 0x00020000 /* DRAM Enable bank 1 */ 1451#define MDCNFG_SA1110_DTIM2 0x00040000 /* DRAM timing type 0/1 */ 1452#define MDCNFG_SA1110_DWID2 0x00080000 /* DRAM bus width 0/1 */ 1453#define MDCNFG_SA1110_DRAC2 Fld(3, 20) /* DRAM row addr bit count */ 1454 /* bank 0/1 */ 1455#define MDCNFG_SA1110_CDB22 0x00800000 /* Mem Clock divide by 2 0/1 */ 1456#define MDCNFG_SA1110_TRP2 Fld(3, 24) /* RAS precharge 0/1 */ 1457#define MDCNFG_SA1110_TDL2 Fld(2, 28) /* Data input latch after CAS*/ 1458 /* deassertion 0/1 */ 1459#define MDCNFG_SA1110_TWR2 Fld(2, 30) /* SDRAM write recovery 0/1 */ 1460 1461 1462/* 1463 * Static memory control registers 1464 * 1465 * Registers 1466 * MSC0 Memory system: Static memory Control register 0 1467 * (read/write). 1468 * MSC1 Memory system: Static memory Control register 1 1469 * (read/write). 1470 * 1471 * Clocks 1472 * fcpu, Tcpu Frequency, period of the CPU core clock (CCLK). 1473 * fmem, Tmem Frequency, period of the memory clock (fmem = fcpu/2). 1474 */ 1475 1476#define MSC0 __REG(0xa0000010) /* Static memory Control reg. 0 */ 1477#define MSC1 __REG(0xa0000014) /* Static memory Control reg. 1 */ 1478#define MSC2 __REG(0xa000002c) /* Static memory Control reg. 2, not contiguous */ 1479 1480#define MSC_Bnk(Nb) /* static memory Bank [0..3] */ \ 1481 Fld (16, ((Nb) Modulo 2)*16) 1482#define MSC0_Bnk0 MSC_Bnk (0) /* static memory Bank 0 */ 1483#define MSC0_Bnk1 MSC_Bnk (1) /* static memory Bank 1 */ 1484#define MSC1_Bnk2 MSC_Bnk (2) /* static memory Bank 2 */ 1485#define MSC1_Bnk3 MSC_Bnk (3) /* static memory Bank 3 */ 1486 1487#define MSC_RT Fld (2, 0) /* ROM/static memory Type */ 1488#define MSC_NonBrst /* Non-Burst static memory */ \ 1489 (0 << FShft (MSC_RT)) 1490#define MSC_SRAM /* 32-bit byte-writable SRAM */ \ 1491 (1 << FShft (MSC_RT)) 1492#define MSC_Brst4 /* Burst-of-4 static memory */ \ 1493 (2 << FShft (MSC_RT)) 1494#define MSC_Brst8 /* Burst-of-8 static memory */ \ 1495 (3 << FShft (MSC_RT)) 1496#define MSC_RBW 0x0004 /* ROM/static memory Bus Width */ 1497#define MSC_32BitStMem (MSC_RBW*0) /* 32-Bit Static Memory */ 1498#define MSC_16BitStMem (MSC_RBW*1) /* 16-Bit Static Memory */ 1499#define MSC_RDF Fld (5, 3) /* ROM/static memory read Delay */ 1500 /* First access - 1(.5) [Tmem] */ 1501#define MSC_1stRdAcc(Tcpu) /* 1st Read Access time (burst */ \ 1502 /* static memory) [3..65 Tcpu] */ \ 1503 ((((Tcpu) - 3)/2) << FShft (MSC_RDF)) 1504#define MSC_Ceil1stRdAcc(Tcpu) /* Ceil. of 1stRdAcc [3..65 Tcpu] */ \ 1505 ((((Tcpu) - 2)/2) << FShft (MSC_RDF)) 1506#define MSC_RdAcc(Tcpu) /* Read Access time (non-burst */ \ 1507 /* static memory) [2..64 Tcpu] */ \ 1508 ((((Tcpu) - 2)/2) << FShft (MSC_RDF)) 1509#define MSC_CeilRdAcc(Tcpu) /* Ceil. of RdAcc [2..64 Tcpu] */ \ 1510 ((((Tcpu) - 1)/2) << FShft (MSC_RDF)) 1511#define MSC_RDN Fld (5, 8) /* ROM/static memory read Delay */ 1512 /* Next access - 1 [Tmem] */ 1513#define MSC_NxtRdAcc(Tcpu) /* Next Read Access time (burst */ \ 1514 /* static memory) [2..64 Tcpu] */ \ 1515 ((((Tcpu) - 2)/2) << FShft (MSC_RDN)) 1516#define MSC_CeilNxtRdAcc(Tcpu) /* Ceil. of NxtRdAcc [2..64 Tcpu] */ \ 1517 ((((Tcpu) - 1)/2) << FShft (MSC_RDN)) 1518#define MSC_WrAcc(Tcpu) /* Write Access time (non-burst */ \ 1519 /* static memory) [2..64 Tcpu] */ \ 1520 ((((Tcpu) - 2)/2) << FShft (MSC_RDN)) 1521#define MSC_CeilWrAcc(Tcpu) /* Ceil. of WrAcc [2..64 Tcpu] */ \ 1522 ((((Tcpu) - 1)/2) << FShft (MSC_RDN)) 1523#define MSC_RRR Fld (3, 13) /* ROM/static memory RecoveRy */ 1524 /* time/2 [Tmem] */ 1525#define MSC_Rec(Tcpu) /* Recovery time [0..28 Tcpu] */ \ 1526 (((Tcpu)/4) << FShft (MSC_RRR)) 1527#define MSC_CeilRec(Tcpu) /* Ceil. of Rec [0..28 Tcpu] */ \ 1528 ((((Tcpu) + 3)/4) << FShft (MSC_RRR)) 1529 1530 1531/* 1532 * Personal Computer Memory Card International Association (PCMCIA) control 1533 * register 1534 * 1535 * Register 1536 * MECR Memory system: Expansion memory bus (PCMCIA) 1537 * Configuration Register (read/write). 1538 * 1539 * Clocks 1540 * fcpu, Tcpu Frequency, period of the CPU core clock (CCLK). 1541 * fmem, Tmem Frequency, period of the memory clock (fmem = fcpu/2). 1542 * fbclk, Tbclk Frequency, period of the PCMCIA clock (BCLK). 1543 */ 1544 1545 /* Memory system: */ 1546#define MECR __REG(0xA0000018) /* Expansion memory bus (PCMCIA) Configuration Reg. */ 1547 1548#define MECR_PCMCIA(Nb) /* PCMCIA [0..1] */ \ 1549 Fld (15, (Nb)*16) 1550#define MECR_PCMCIA0 MECR_PCMCIA (0) /* PCMCIA 0 */ 1551#define MECR_PCMCIA1 MECR_PCMCIA (1) /* PCMCIA 1 */ 1552 1553#define MECR_BSIO Fld (5, 0) /* BCLK Select I/O - 1 [Tmem] */ 1554#define MECR_IOClk(Tcpu) /* I/O Clock [2..64 Tcpu] */ \ 1555 ((((Tcpu) - 2)/2) << FShft (MECR_BSIO)) 1556#define MECR_CeilIOClk(Tcpu) /* Ceil. of IOClk [2..64 Tcpu] */ \ 1557 ((((Tcpu) - 1)/2) << FShft (MECR_BSIO)) 1558#define MECR_BSA Fld (5, 5) /* BCLK Select Attribute - 1 */ 1559 /* [Tmem] */ 1560#define MECR_AttrClk(Tcpu) /* Attribute Clock [2..64 Tcpu] */ \ 1561 ((((Tcpu) - 2)/2) << FShft (MECR_BSA)) 1562#define MECR_CeilAttrClk(Tcpu) /* Ceil. of AttrClk [2..64 Tcpu] */ \ 1563 ((((Tcpu) - 1)/2) << FShft (MECR_BSA)) 1564#define MECR_BSM Fld (5, 10) /* BCLK Select Memory - 1 [Tmem] */ 1565#define MECR_MemClk(Tcpu) /* Memory Clock [2..64 Tcpu] */ \ 1566 ((((Tcpu) - 2)/2) << FShft (MECR_BSM)) 1567#define MECR_CeilMemClk(Tcpu) /* Ceil. of MemClk [2..64 Tcpu] */ \ 1568 ((((Tcpu) - 1)/2) << FShft (MECR_BSM)) 1569 1570/* 1571 * On SA1110 only 1572 */ 1573 1574#define MDREFR __REG(0xA000001C) 1575 1576#define MDREFR_TRASR Fld (4, 0) 1577#define MDREFR_DRI Fld (12, 4) 1578#define MDREFR_E0PIN (1 << 16) 1579#define MDREFR_K0RUN (1 << 17) 1580#define MDREFR_K0DB2 (1 << 18) 1581#define MDREFR_E1PIN (1 << 20) 1582#define MDREFR_K1RUN (1 << 21) 1583#define MDREFR_K1DB2 (1 << 22) 1584#define MDREFR_K2RUN (1 << 25) 1585#define MDREFR_K2DB2 (1 << 26) 1586#define MDREFR_EAPD (1 << 28) 1587#define MDREFR_KAPD (1 << 29) 1588#define MDREFR_SLFRSH (1 << 31) 1589 1590 1591/* 1592 * Direct Memory Access (DMA) control registers 1593 */ 1594#define DMA_SIZE (6 * 0x20) 1595#define DMA_PHYS 0xb0000000 1596 1597 1598/* 1599 * Liquid Crystal Display (LCD) control registers 1600 * 1601 * Registers 1602 * LCCR0 Liquid Crystal Display (LCD) Control Register 0 1603 * (read/write). 1604 * [Bits LDM, BAM, and ERM are only implemented in 1605 * versions 2.0 (rev. = 8) and higher of the StrongARM 1606 * SA-1100.] 1607 * LCSR Liquid Crystal Display (LCD) Status Register 1608 * (read/write). 1609 * [Bit LDD can be only read in versions 1.0 (rev. = 1) 1610 * and 1.1 (rev. = 2) of the StrongARM SA-1100, it can be 1611 * read and written (cleared) in versions 2.0 (rev. = 8) 1612 * and higher.] 1613 * DBAR1 Liquid Crystal Display (LCD) Direct Memory Access 1614 * (DMA) Base Address Register channel 1 (read/write). 1615 * DCAR1 Liquid Crystal Display (LCD) Direct Memory Access 1616 * (DMA) Current Address Register channel 1 (read). 1617 * DBAR2 Liquid Crystal Display (LCD) Direct Memory Access 1618 * (DMA) Base Address Register channel 2 (read/write). 1619 * DCAR2 Liquid Crystal Display (LCD) Direct Memory Access 1620 * (DMA) Current Address Register channel 2 (read). 1621 * LCCR1 Liquid Crystal Display (LCD) Control Register 1 1622 * (read/write). 1623 * [The LCCR1 register can be only written in 1624 * versions 1.0 (rev. = 1) and 1.1 (rev. = 2) of the 1625 * StrongARM SA-1100, it can be written and read in 1626 * versions 2.0 (rev. = 8) and higher.] 1627 * LCCR2 Liquid Crystal Display (LCD) Control Register 2 1628 * (read/write). 1629 * [The LCCR1 register can be only written in 1630 * versions 1.0 (rev. = 1) and 1.1 (rev. = 2) of the 1631 * StrongARM SA-1100, it can be written and read in 1632 * versions 2.0 (rev. = 8) and higher.] 1633 * LCCR3 Liquid Crystal Display (LCD) Control Register 3 1634 * (read/write). 1635 * [The LCCR1 register can be only written in 1636 * versions 1.0 (rev. = 1) and 1.1 (rev. = 2) of the 1637 * StrongARM SA-1100, it can be written and read in 1638 * versions 2.0 (rev. = 8) and higher. Bit PCP is only 1639 * implemented in versions 2.0 (rev. = 8) and higher of 1640 * the StrongARM SA-1100.] 1641 * 1642 * Clocks 1643 * fcpu, Tcpu Frequency, period of the CPU core clock (CCLK). 1644 * fmem, Tmem Frequency, period of the memory clock (fmem = fcpu/2). 1645 * fpix, Tpix Frequency, period of the pixel clock. 1646 * fln, Tln Frequency, period of the line clock. 1647 * fac, Tac Frequency, period of the AC bias clock. 1648 */ 1649 1650#define LCD_PEntrySp 2 /* LCD Palette Entry Space [byte] */ 1651#define LCD_4BitPSp /* LCD 4-Bit pixel Palette Space */ \ 1652 /* [byte] */ \ 1653 (16*LCD_PEntrySp) 1654#define LCD_8BitPSp /* LCD 8-Bit pixel Palette Space */ \ 1655 /* [byte] */ \ 1656 (256*LCD_PEntrySp) 1657#define LCD_12_16BitPSp /* LCD 12/16-Bit pixel */ \ 1658 /* dummy-Palette Space [byte] */ \ 1659 (16*LCD_PEntrySp) 1660 1661#define LCD_PGrey Fld (4, 0) /* LCD Palette entry Grey value */ 1662#define LCD_PBlue Fld (4, 0) /* LCD Palette entry Blue value */ 1663#define LCD_PGreen Fld (4, 4) /* LCD Palette entry Green value */ 1664#define LCD_PRed Fld (4, 8) /* LCD Palette entry Red value */ 1665#define LCD_PBS Fld (2, 12) /* LCD Pixel Bit Size */ 1666#define LCD_4Bit /* LCD 4-Bit pixel mode */ \ 1667 (0 << FShft (LCD_PBS)) 1668#define LCD_8Bit /* LCD 8-Bit pixel mode */ \ 1669 (1 << FShft (LCD_PBS)) 1670#define LCD_12_16Bit /* LCD 12/16-Bit pixel mode */ \ 1671 (2 << FShft (LCD_PBS)) 1672 1673#define LCD_Int0_0 0x0 /* LCD Intensity = 0.0% = 0 */ 1674#define LCD_Int11_1 0x1 /* LCD Intensity = 11.1% = 1/9 */ 1675#define LCD_Int20_0 0x2 /* LCD Intensity = 20.0% = 1/5 */ 1676#define LCD_Int26_7 0x3 /* LCD Intensity = 26.7% = 4/15 */ 1677#define LCD_Int33_3 0x4 /* LCD Intensity = 33.3% = 3/9 */ 1678#define LCD_Int40_0 0x5 /* LCD Intensity = 40.0% = 2/5 */ 1679#define LCD_Int44_4 0x6 /* LCD Intensity = 44.4% = 4/9 */ 1680#define LCD_Int50_0 0x7 /* LCD Intensity = 50.0% = 1/2 */ 1681#define LCD_Int55_6 0x8 /* LCD Intensity = 55.6% = 5/9 */ 1682#define LCD_Int60_0 0x9 /* LCD Intensity = 60.0% = 3/5 */ 1683#define LCD_Int66_7 0xA /* LCD Intensity = 66.7% = 6/9 */ 1684#define LCD_Int73_3 0xB /* LCD Intensity = 73.3% = 11/15 */ 1685#define LCD_Int80_0 0xC /* LCD Intensity = 80.0% = 4/5 */ 1686#define LCD_Int88_9 0xD /* LCD Intensity = 88.9% = 8/9 */ 1687#define LCD_Int100_0 0xE /* LCD Intensity = 100.0% = 1 */ 1688#define LCD_Int100_0A 0xF /* LCD Intensity = 100.0% = 1 */ 1689 /* (Alternative) */ 1690 1691#define LCCR0_LEN 0x00000001 /* LCD ENable */ 1692#define LCCR0_CMS 0x00000002 /* Color/Monochrome display Select */ 1693#define LCCR0_Color (LCCR0_CMS*0) /* Color display */ 1694#define LCCR0_Mono (LCCR0_CMS*1) /* Monochrome display */ 1695#define LCCR0_SDS 0x00000004 /* Single/Dual panel display */ 1696 /* Select */ 1697#define LCCR0_Sngl (LCCR0_SDS*0) /* Single panel display */ 1698#define LCCR0_Dual (LCCR0_SDS*1) /* Dual panel display */ 1699#define LCCR0_LDM 0x00000008 /* LCD Disable done (LDD) */ 1700 /* interrupt Mask (disable) */ 1701#define LCCR0_BAM 0x00000010 /* Base Address update (BAU) */ 1702 /* interrupt Mask (disable) */ 1703#define LCCR0_ERM 0x00000020 /* LCD ERror (BER, IOL, IUL, IOU, */ 1704 /* IUU, OOL, OUL, OOU, and OUU) */ 1705 /* interrupt Mask (disable) */ 1706#define LCCR0_PAS 0x00000080 /* Passive/Active display Select */ 1707#define LCCR0_Pas (LCCR0_PAS*0) /* Passive display (STN) */ 1708#define LCCR0_Act (LCCR0_PAS*1) /* Active display (TFT) */ 1709#define LCCR0_BLE 0x00000100 /* Big/Little Endian select */ 1710#define LCCR0_LtlEnd (LCCR0_BLE*0) /* Little Endian frame buffer */ 1711#define LCCR0_BigEnd (LCCR0_BLE*1) /* Big Endian frame buffer */ 1712#define LCCR0_DPD 0x00000200 /* Double Pixel Data (monochrome */ 1713 /* display mode) */ 1714#define LCCR0_4PixMono (LCCR0_DPD*0) /* 4-Pixel/clock Monochrome */ 1715 /* display */ 1716#define LCCR0_8PixMono (LCCR0_DPD*1) /* 8-Pixel/clock Monochrome */ 1717 /* display */ 1718#define LCCR0_PDD Fld (8, 12) /* Palette DMA request Delay */ 1719 /* [Tmem] */ 1720#define LCCR0_DMADel(Tcpu) /* palette DMA request Delay */ \ 1721 /* [0..510 Tcpu] */ \ 1722 ((Tcpu)/2 << FShft (LCCR0_PDD)) 1723 1724#define LCSR_LDD 0x00000001 /* LCD Disable Done */ 1725#define LCSR_BAU 0x00000002 /* Base Address Update (read) */ 1726#define LCSR_BER 0x00000004 /* Bus ERror */ 1727#define LCSR_ABC 0x00000008 /* AC Bias clock Count */ 1728#define LCSR_IOL 0x00000010 /* Input FIFO Over-run Lower */ 1729 /* panel */ 1730#define LCSR_IUL 0x00000020 /* Input FIFO Under-run Lower */ 1731 /* panel */ 1732#define LCSR_IOU 0x00000040 /* Input FIFO Over-run Upper */ 1733 /* panel */ 1734#define LCSR_IUU 0x00000080 /* Input FIFO Under-run Upper */ 1735 /* panel */ 1736#define LCSR_OOL 0x00000100 /* Output FIFO Over-run Lower */ 1737 /* panel */ 1738#define LCSR_OUL 0x00000200 /* Output FIFO Under-run Lower */ 1739 /* panel */ 1740#define LCSR_OOU 0x00000400 /* Output FIFO Over-run Upper */ 1741 /* panel */ 1742#define LCSR_OUU 0x00000800 /* Output FIFO Under-run Upper */ 1743 /* panel */ 1744 1745#define LCCR1_PPL Fld (6, 4) /* Pixels Per Line/16 - 1 */ 1746#define LCCR1_DisWdth(Pixel) /* Display Width [16..1024 pix.] */ \ 1747 (((Pixel) - 16)/16 << FShft (LCCR1_PPL)) 1748#define LCCR1_HSW Fld (6, 10) /* Horizontal Synchronization */ 1749 /* pulse Width - 1 [Tpix] (L_LCLK) */ 1750#define LCCR1_HorSnchWdth(Tpix) /* Horizontal Synchronization */ \ 1751 /* pulse Width [1..64 Tpix] */ \ 1752 (((Tpix) - 1) << FShft (LCCR1_HSW)) 1753#define LCCR1_ELW Fld (8, 16) /* End-of-Line pixel clock Wait */ 1754 /* count - 1 [Tpix] */ 1755#define LCCR1_EndLnDel(Tpix) /* End-of-Line Delay */ \ 1756 /* [1..256 Tpix] */ \ 1757 (((Tpix) - 1) << FShft (LCCR1_ELW)) 1758#define LCCR1_BLW Fld (8, 24) /* Beginning-of-Line pixel clock */ 1759 /* Wait count - 1 [Tpix] */ 1760#define LCCR1_BegLnDel(Tpix) /* Beginning-of-Line Delay */ \ 1761 /* [1..256 Tpix] */ \ 1762 (((Tpix) - 1) << FShft (LCCR1_BLW)) 1763 1764#define LCCR2_LPP Fld (10, 0) /* Line Per Panel - 1 */ 1765#define LCCR2_DisHght(Line) /* Display Height [1..1024 lines] */ \ 1766 (((Line) - 1) << FShft (LCCR2_LPP)) 1767#define LCCR2_VSW Fld (6, 10) /* Vertical Synchronization pulse */ 1768 /* Width - 1 [Tln] (L_FCLK) */ 1769#define LCCR2_VrtSnchWdth(Tln) /* Vertical Synchronization pulse */ \ 1770 /* Width [1..64 Tln] */ \ 1771 (((Tln) - 1) << FShft (LCCR2_VSW)) 1772#define LCCR2_EFW Fld (8, 16) /* End-of-Frame line clock Wait */ 1773 /* count [Tln] */ 1774#define LCCR2_EndFrmDel(Tln) /* End-of-Frame Delay */ \ 1775 /* [0..255 Tln] */ \ 1776 ((Tln) << FShft (LCCR2_EFW)) 1777#define LCCR2_BFW Fld (8, 24) /* Beginning-of-Frame line clock */ 1778 /* Wait count [Tln] */ 1779#define LCCR2_BegFrmDel(Tln) /* Beginning-of-Frame Delay */ \ 1780 /* [0..255 Tln] */ \ 1781 ((Tln) << FShft (LCCR2_BFW)) 1782 1783#define LCCR3_PCD Fld (8, 0) /* Pixel Clock Divisor/2 - 2 */ 1784 /* [1..255] (L_PCLK) */ 1785 /* fpix = fcpu/(2*(PCD + 2)) */ 1786 /* Tpix = 2*(PCD + 2)*Tcpu */ 1787#define LCCR3_PixClkDiv(Div) /* Pixel Clock Divisor [6..514] */ \ 1788 (((Div) - 4)/2 << FShft (LCCR3_PCD)) 1789 /* fpix = fcpu/(2*Floor (Div/2)) */ 1790 /* Tpix = 2*Floor (Div/2)*Tcpu */ 1791#define LCCR3_CeilPixClkDiv(Div) /* Ceil. of PixClkDiv [6..514] */ \ 1792 (((Div) - 3)/2 << FShft (LCCR3_PCD)) 1793 /* fpix = fcpu/(2*Ceil (Div/2)) */ 1794 /* Tpix = 2*Ceil (Div/2)*Tcpu */ 1795#define LCCR3_ACB Fld (8, 8) /* AC Bias clock half period - 1 */ 1796 /* [Tln] (L_BIAS) */ 1797#define LCCR3_ACBsDiv(Div) /* AC Bias clock Divisor [2..512] */ \ 1798 (((Div) - 2)/2 << FShft (LCCR3_ACB)) 1799 /* fac = fln/(2*Floor (Div/2)) */ 1800 /* Tac = 2*Floor (Div/2)*Tln */ 1801#define LCCR3_CeilACBsDiv(Div) /* Ceil. of ACBsDiv [2..512] */ \ 1802 (((Div) - 1)/2 << FShft (LCCR3_ACB)) 1803 /* fac = fln/(2*Ceil (Div/2)) */ 1804 /* Tac = 2*Ceil (Div/2)*Tln */ 1805#define LCCR3_API Fld (4, 16) /* AC bias Pin transitions per */ 1806 /* Interrupt */ 1807#define LCCR3_ACBsCntOff /* AC Bias clock transition Count */ \ 1808 /* Off */ \ 1809 (0 << FShft (LCCR3_API)) 1810#define LCCR3_ACBsCnt(Trans) /* AC Bias clock transition Count */ \ 1811 /* [1..15] */ \ 1812 ((Trans) << FShft (LCCR3_API)) 1813#define LCCR3_VSP 0x00100000 /* Vertical Synchronization pulse */ 1814 /* Polarity (L_FCLK) */ 1815#define LCCR3_VrtSnchH (LCCR3_VSP*0) /* Vertical Synchronization pulse */ 1816 /* active High */ 1817#define LCCR3_VrtSnchL (LCCR3_VSP*1) /* Vertical Synchronization pulse */ 1818 /* active Low */ 1819#define LCCR3_HSP 0x00200000 /* Horizontal Synchronization */ 1820 /* pulse Polarity (L_LCLK) */ 1821#define LCCR3_HorSnchH (LCCR3_HSP*0) /* Horizontal Synchronization */ 1822 /* pulse active High */ 1823#define LCCR3_HorSnchL (LCCR3_HSP*1) /* Horizontal Synchronization */ 1824 /* pulse active Low */ 1825#define LCCR3_PCP 0x00400000 /* Pixel Clock Polarity (L_PCLK) */ 1826#define LCCR3_PixRsEdg (LCCR3_PCP*0) /* Pixel clock Rising-Edge */ 1827#define LCCR3_PixFlEdg (LCCR3_PCP*1) /* Pixel clock Falling-Edge */ 1828#define LCCR3_OEP 0x00800000 /* Output Enable Polarity (L_BIAS, */ 1829 /* active display mode) */ 1830#define LCCR3_OutEnH (LCCR3_OEP*0) /* Output Enable active High */ 1831#define LCCR3_OutEnL (LCCR3_OEP*1) /* Output Enable active Low */ 1832