/*
 * This file is provided under a dual BSD/GPLv2 license.  When using or
 * redistributing this file, you may do so under either license.
 *
 * GPL LICENSE SUMMARY
 *
 * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of version 2 of the GNU General Public License as
 * published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful, but
 * WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
 * The full GNU General Public License is included in this distribution
 * in the file called LICENSE.GPL.
 *
 * BSD LICENSE
 *
 * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 *   * Redistributions of source code must retain the above copyright
 *     notice, this list of conditions and the following disclaimer.
 *   * Redistributions in binary form must reproduce the above copyright
 *     notice, this list of conditions and the following disclaimer in
 *     the documentation and/or other materials provided with the
 *     distribution.
 *   * Neither the name of Intel Corporation nor the names of its
 *     contributors may be used to endorse or promote products derived
 *     from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/firmware.h>
#include <linux/efi.h>
#include <asm/string.h>
#include <scsi/scsi_host.h>
#include "host.h"
#include "isci.h"
#include "task.h"
#include "probe_roms.h"

#define MAJ 1
#define MIN 2
#define BUILD 0
#define DRV_VERSION __stringify(MAJ) "." __stringify(MIN) "." \
        __stringify(BUILD)

MODULE_VERSION(DRV_VERSION);

static struct scsi_transport_template *isci_transport_template;

static const struct pci_device_id isci_id_table[] = {
        { PCI_VDEVICE(INTEL, 0x1D61),},
        { PCI_VDEVICE(INTEL, 0x1D63),},
        { PCI_VDEVICE(INTEL, 0x1D65),},
        { PCI_VDEVICE(INTEL, 0x1D67),},
        { PCI_VDEVICE(INTEL, 0x1D69),},
        { PCI_VDEVICE(INTEL, 0x1D6B),},
        { PCI_VDEVICE(INTEL, 0x1D60),},
        { PCI_VDEVICE(INTEL, 0x1D62),},
        { PCI_VDEVICE(INTEL, 0x1D64),},
        { PCI_VDEVICE(INTEL, 0x1D66),},
        { PCI_VDEVICE(INTEL, 0x1D68),},
        { PCI_VDEVICE(INTEL, 0x1D6A),},
        {}
};

MODULE_DEVICE_TABLE(pci, isci_id_table);

/* linux isci specific settings */

unsigned char no_outbound_task_to = 2;
module_param(no_outbound_task_to, byte, 0);
MODULE_PARM_DESC(no_outbound_task_to, "No Outbound Task Timeout (1us incr)");

u16 ssp_max_occ_to = 20;
module_param(ssp_max_occ_to, ushort, 0);
MODULE_PARM_DESC(ssp_max_occ_to, "SSP Max occupancy timeout (100us incr)");

u16 stp_max_occ_to = 5;
module_param(stp_max_occ_to, ushort, 0);
MODULE_PARM_DESC(stp_max_occ_to, "STP Max occupancy timeout (100us incr)");

u16 ssp_inactive_to = 5;
module_param(ssp_inactive_to, ushort, 0);
MODULE_PARM_DESC(ssp_inactive_to, "SSP inactivity timeout (100us incr)");

u16 stp_inactive_to = 5;
module_param(stp_inactive_to, ushort, 0);
MODULE_PARM_DESC(stp_inactive_to, "STP inactivity timeout (100us incr)");

unsigned char phy_gen = SCIC_SDS_PARM_GEN2_SPEED;
module_param(phy_gen, byte, 0);
MODULE_PARM_DESC(phy_gen, "PHY generation (1: 1.5Gbps 2: 3.0Gbps 3: 6.0Gbps)");

unsigned char max_concurr_spinup;
module_param(max_concurr_spinup, byte, 0);
MODULE_PARM_DESC(max_concurr_spinup, "Max concurrent device spinup");

uint cable_selection_override = CABLE_OVERRIDE_DISABLED;
module_param(cable_selection_override, uint, 0);

MODULE_PARM_DESC(cable_selection_override,
                 "This field indicates length of the SAS/SATA cable between "
                 "host and device. If any bits > 15 are set (default) "
                 "indicates \"use platform defaults\"");

static ssize_t isci_show_id(struct device *dev, struct device_attribute *attr, char *buf)
{
        struct Scsi_Host *shost = container_of(dev, typeof(*shost), shost_dev);
        struct sas_ha_struct *sas_ha = SHOST_TO_SAS_HA(shost);
        struct isci_host *ihost = container_of(sas_ha, typeof(*ihost), sas_ha);

        return snprintf(buf, PAGE_SIZE, "%d\n", ihost->id);
}

static DEVICE_ATTR(isci_id, S_IRUGO, isci_show_id, NULL);

struct device_attribute *isci_host_attrs[] = {
        &dev_attr_isci_id,
        NULL
};

static struct scsi_host_template isci_sht = {

        .module                         = THIS_MODULE,
        .name                           = DRV_NAME,
        .proc_name                      = DRV_NAME,
        .queuecommand                   = sas_queuecommand,
        .target_alloc                   = sas_target_alloc,
        .slave_configure                = sas_slave_configure,
        .scan_finished                  = isci_host_scan_finished,
        .scan_start                     = isci_host_start,
        .change_queue_depth             = sas_change_queue_depth,
        .change_queue_type              = sas_change_queue_type,
        .bios_param                     = sas_bios_param,
        .can_queue                      = ISCI_CAN_QUEUE_VAL,
        .cmd_per_lun                    = 1,
        .this_id                        = -1,
        .sg_tablesize                   = SG_ALL,
        .max_sectors                    = SCSI_DEFAULT_MAX_SECTORS,
        .use_clustering                 = ENABLE_CLUSTERING,
        .eh_abort_handler               = sas_eh_abort_handler,
        .eh_device_reset_handler        = sas_eh_device_reset_handler,
        .eh_bus_reset_handler           = sas_eh_bus_reset_handler,
        .target_destroy                 = sas_target_destroy,
        .ioctl                          = sas_ioctl,
        .shost_attrs                    = isci_host_attrs,
};

static struct sas_domain_function_template isci_transport_ops  = {

        /* The class calls these to notify the LLDD of an event. */
        .lldd_port_formed       = isci_port_formed,
        .lldd_port_deformed     = isci_port_deformed,

        /* The class calls these when a device is found or gone. */
        .lldd_dev_found         = isci_remote_device_found,
        .lldd_dev_gone          = isci_remote_device_gone,

        .lldd_execute_task      = isci_task_execute_task,
        /* Task Management Functions. Must be called from process context. */
        .lldd_abort_task        = isci_task_abort_task,
        .lldd_abort_task_set    = isci_task_abort_task_set,
        .lldd_clear_aca         = isci_task_clear_aca,
        .lldd_clear_task_set    = isci_task_clear_task_set,
        .lldd_I_T_nexus_reset   = isci_task_I_T_nexus_reset,
        .lldd_lu_reset          = isci_task_lu_reset,
        .lldd_query_task        = isci_task_query_task,

        /* ata recovery called from ata-eh */
        .lldd_ata_check_ready   = isci_ata_check_ready,

        /* Port and Adapter management */
        .lldd_clear_nexus_port  = isci_task_clear_nexus_port,
        .lldd_clear_nexus_ha    = isci_task_clear_nexus_ha,

        /* Phy management */
        .lldd_control_phy       = isci_phy_control,

        /* GPIO support */
        .lldd_write_gpio        = isci_gpio_write,
};


/******************************************************************************
* P R O T E C T E D  M E T H O D S
******************************************************************************/



/**
 * isci_register_sas_ha() - This method initializes various lldd
 *    specific members of the sas_ha struct and calls the libsas
 *    sas_register_ha() function.
 * @isci_host: This parameter specifies the lldd specific wrapper for the
 *    libsas sas_ha struct.
 *
 * This method returns an error code indicating success or failure. The user
 * should check for possible memory allocation error return otherwise, a zero
 * indicates success.
 */
static int isci_register_sas_ha(struct isci_host *isci_host)
{
        int i;
        struct sas_ha_struct *sas_ha = &(isci_host->sas_ha);
        struct asd_sas_phy **sas_phys;
        struct asd_sas_port **sas_ports;

        sas_phys = devm_kzalloc(&isci_host->pdev->dev,
                                SCI_MAX_PHYS * sizeof(void *),
                                GFP_KERNEL);
        if (!sas_phys)
                return -ENOMEM;

        sas_ports = devm_kzalloc(&isci_host->pdev->dev,
                                 SCI_MAX_PORTS * sizeof(void *),
                                 GFP_KERNEL);
        if (!sas_ports)
                return -ENOMEM;

        sas_ha->sas_ha_name = DRV_NAME;
        sas_ha->lldd_module = THIS_MODULE;
        sas_ha->sas_addr    = &isci_host->phys[0].sas_addr[0];

        for (i = 0; i < SCI_MAX_PHYS; i++) {
                sas_phys[i] = &isci_host->phys[i].sas_phy;
                sas_ports[i] = &isci_host->sas_ports[i];
        }

        sas_ha->sas_phy  = sas_phys;
        sas_ha->sas_port = sas_ports;
        sas_ha->num_phys = SCI_MAX_PHYS;

        sas_ha->strict_wide_ports = 1;

        sas_register_ha(sas_ha);

        return 0;
}

static void isci_unregister(struct isci_host *isci_host)
{
        struct Scsi_Host *shost;

        if (!isci_host)
                return;

        shost = to_shost(isci_host);
        sas_unregister_ha(&isci_host->sas_ha);

        sas_remove_host(shost);
        scsi_host_put(shost);
}

static int isci_pci_init(struct pci_dev *pdev)
{
        int err, bar_num, bar_mask = 0;
        void __iomem * const *iomap;

        err = pcim_enable_device(pdev);
        if (err) {
                dev_err(&pdev->dev,
                        "failed enable PCI device %s!\n",
                        pci_name(pdev));
                return err;
        }

        for (bar_num = 0; bar_num < SCI_PCI_BAR_COUNT; bar_num++)
                bar_mask |= 1 << (bar_num * 2);

        err = pcim_iomap_regions(pdev, bar_mask, DRV_NAME);
        if (err)
                return err;

        iomap = pcim_iomap_table(pdev);
        if (!iomap)
                return -ENOMEM;

        pci_set_master(pdev);

        err = pci_set_dma_mask(pdev, DMA_BIT_MASK(64));
        if (err) {
                err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
                if (err)
                        return err;
        }

        err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
        if (err) {
                err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
                if (err)
                        return err;
        }

        return 0;
}

static int num_controllers(struct pci_dev *pdev)
{
        /* bar size alone can tell us if we are running with a dual controller
         * part, no need to trust revision ids that might be under broken firmware
         * control
         */
        resource_size_t scu_bar_size = pci_resource_len(pdev, SCI_SCU_BAR*2);
        resource_size_t smu_bar_size = pci_resource_len(pdev, SCI_SMU_BAR*2);

        if (scu_bar_size >= SCI_SCU_BAR_SIZE*SCI_MAX_CONTROLLERS &&
            smu_bar_size >= SCI_SMU_BAR_SIZE*SCI_MAX_CONTROLLERS)
                return SCI_MAX_CONTROLLERS;
        else
                return 1;
}

static int isci_setup_interrupts(struct pci_dev *pdev)
{
        int err, i, num_msix;
        struct isci_host *ihost;
        struct isci_pci_info *pci_info = to_pci_info(pdev);

        /*
         *  Determine the number of vectors associated with this
         *  PCI function.
         */
        num_msix = num_controllers(pdev) * SCI_NUM_MSI_X_INT;

        for (i = 0; i < num_msix; i++)
                pci_info->msix_entries[i].entry = i;

        err = pci_enable_msix_exact(pdev, pci_info->msix_entries, num_msix);
        if (err)
                goto intx;

        for (i = 0; i < num_msix; i++) {
                int id = i / SCI_NUM_MSI_X_INT;
                struct msix_entry *msix = &pci_info->msix_entries[i];
                irq_handler_t isr;

                ihost = pci_info->hosts[id];
                /* odd numbered vectors are error interrupts */
                if (i & 1)
                        isr = isci_error_isr;
                else
                        isr = isci_msix_isr;

                err = devm_request_irq(&pdev->dev, msix->vector, isr, 0,
                                       DRV_NAME"-msix", ihost);
                if (!err)
                        continue;

                dev_info(&pdev->dev, "msix setup failed falling back to intx\n");
                while (i--) {
                        id = i / SCI_NUM_MSI_X_INT;
                        ihost = pci_info->hosts[id];
                        msix = &pci_info->msix_entries[i];
                        devm_free_irq(&pdev->dev, msix->vector, ihost);
                }
                pci_disable_msix(pdev);
                goto intx;
        }
        return 0;

 intx:
        for_each_isci_host(i, ihost, pdev) {
                err = devm_request_irq(&pdev->dev, pdev->irq, isci_intx_isr,
                                       IRQF_SHARED, DRV_NAME"-intx", ihost);
                if (err)
                        break;
        }
        return err;
}

static void isci_user_parameters_get(struct sci_user_parameters *u)
{
        int i;

        for (i = 0; i < SCI_MAX_PHYS; i++) {
                struct sci_phy_user_params *u_phy = &u->phys[i];

                u_phy->max_speed_generation = phy_gen;

                /* we are not exporting these for now */
                u_phy->align_insertion_frequency = 0x7f;
                u_phy->in_connection_align_insertion_frequency = 0xff;
                u_phy->notify_enable_spin_up_insertion_frequency = 0x33;
        }

        u->stp_inactivity_timeout = stp_inactive_to;
        u->ssp_inactivity_timeout = ssp_inactive_to;
        u->stp_max_occupancy_timeout = stp_max_occ_to;
        u->ssp_max_occupancy_timeout = ssp_max_occ_to;
        u->no_outbound_task_timeout = no_outbound_task_to;
        u->max_concurr_spinup = max_concurr_spinup;
}

static enum sci_status sci_user_parameters_set(struct isci_host *ihost,
                                               struct sci_user_parameters *sci_parms)
{
        u16 index;

        /*
         * Validate the user parameters.  If they are not legal, then
         * return a failure.
         */
        for (index = 0; index < SCI_MAX_PHYS; index++) {
                struct sci_phy_user_params *u;

                u = &sci_parms->phys[index];

                if (!((u->max_speed_generation <= SCIC_SDS_PARM_MAX_SPEED) &&
                      (u->max_speed_generation > SCIC_SDS_PARM_NO_SPEED)))
                        return SCI_FAILURE_INVALID_PARAMETER_VALUE;

                if (u->in_connection_align_insertion_frequency < 3)
                        return SCI_FAILURE_INVALID_PARAMETER_VALUE;

                if ((u->in_connection_align_insertion_frequency < 3) ||
                    (u->align_insertion_frequency == 0) ||
                    (u->notify_enable_spin_up_insertion_frequency == 0))
                        return SCI_FAILURE_INVALID_PARAMETER_VALUE;
        }

        if ((sci_parms->stp_inactivity_timeout == 0) ||
            (sci_parms->ssp_inactivity_timeout == 0) ||
            (sci_parms->stp_max_occupancy_timeout == 0) ||
            (sci_parms->ssp_max_occupancy_timeout == 0) ||
            (sci_parms->no_outbound_task_timeout == 0))
                return SCI_FAILURE_INVALID_PARAMETER_VALUE;

        memcpy(&ihost->user_parameters, sci_parms, sizeof(*sci_parms));

        return SCI_SUCCESS;
}

static void sci_oem_defaults(struct isci_host *ihost)
{
        /* these defaults are overridden by the platform / firmware */
        struct sci_user_parameters *user = &ihost->user_parameters;
        struct sci_oem_params *oem = &ihost->oem_parameters;
        int i;

        /* Default to APC mode. */
        oem->controller.mode_type = SCIC_PORT_AUTOMATIC_CONFIGURATION_MODE;

        /* Default to APC mode. */
        oem->controller.max_concurr_spin_up = 1;

        /* Default to no SSC operation. */
        oem->controller.do_enable_ssc = false;

        /* Default to short cables on all phys. */
        oem->controller.cable_selection_mask = 0;

        /* Initialize all of the port parameter information to narrow ports. */
        for (i = 0; i < SCI_MAX_PORTS; i++)
                oem->ports[i].phy_mask = 0;

        /* Initialize all of the phy parameter information. */
        for (i = 0; i < SCI_MAX_PHYS; i++) {
                /* Default to 3G (i.e. Gen 2). */
                user->phys[i].max_speed_generation = SCIC_SDS_PARM_GEN2_SPEED;

                /* the frequencies cannot be 0 */
                user->phys[i].align_insertion_frequency = 0x7f;
                user->phys[i].in_connection_align_insertion_frequency = 0xff;
                user->phys[i].notify_enable_spin_up_insertion_frequency = 0x33;

                /* Previous Vitesse based expanders had a arbitration issue that
                 * is worked around by having the upper 32-bits of SAS address
                 * with a value greater then the Vitesse company identifier.
                 * Hence, usage of 0x5FCFFFFF.
                 */
                oem->phys[i].sas_address.low = 0x1 + ihost->id;
                oem->phys[i].sas_address.high = 0x5FCFFFFF;
        }

        user->stp_inactivity_timeout = 5;
        user->ssp_inactivity_timeout = 5;
        user->stp_max_occupancy_timeout = 5;
        user->ssp_max_occupancy_timeout = 20;
        user->no_outbound_task_timeout = 2;
}

static struct isci_host *isci_host_alloc(struct pci_dev *pdev, int id)
{
        struct isci_orom *orom = to_pci_info(pdev)->orom;
        struct sci_user_parameters sci_user_params;
        u8 oem_version = ISCI_ROM_VER_1_0;
        struct isci_host *ihost;
        struct Scsi_Host *shost;
        int err, i;

        ihost = devm_kzalloc(&pdev->dev, sizeof(*ihost), GFP_KERNEL);
        if (!ihost)
                return NULL;

        ihost->pdev = pdev;
        ihost->id = id;
        spin_lock_init(&ihost->scic_lock);
        init_waitqueue_head(&ihost->eventq);
        ihost->sas_ha.dev = &ihost->pdev->dev;
        ihost->sas_ha.lldd_ha = ihost;
        tasklet_init(&ihost->completion_tasklet,
                     isci_host_completion_routine, (unsigned long)ihost);

        /* validate module parameters */
        /* TODO: kill struct sci_user_parameters and reference directly */
        sci_oem_defaults(ihost);
        isci_user_parameters_get(&sci_user_params);
        if (sci_user_parameters_set(ihost, &sci_user_params)) {
                dev_warn(&pdev->dev,
                         "%s: sci_user_parameters_set failed\n", __func__);
                return NULL;
        }

        /* sanity check platform (or 'firmware') oem parameters */
        if (orom) {
                if (id < 0 || id >= SCI_MAX_CONTROLLERS || id > orom->hdr.num_elements) {
                        dev_warn(&pdev->dev, "parsing firmware oem parameters failed\n");
                        return NULL;
                }
                ihost->oem_parameters = orom->ctrl[id];
                oem_version = orom->hdr.version;
        }

        /* validate oem parameters (platform, firmware, or built-in defaults) */
        if (sci_oem_parameters_validate(&ihost->oem_parameters, oem_version)) {
                dev_warn(&pdev->dev, "oem parameter validation failed\n");
                return NULL;
        }

        for (i = 0; i < SCI_MAX_PORTS; i++) {
                struct isci_port *iport = &ihost->ports[i];

                INIT_LIST_HEAD(&iport->remote_dev_list);
                iport->isci_host = ihost;
        }

        for (i = 0; i < SCI_MAX_PHYS; i++)
                isci_phy_init(&ihost->phys[i], ihost, i);

        for (i = 0; i < SCI_MAX_REMOTE_DEVICES; i++) {
                struct isci_remote_device *idev = &ihost->devices[i];

                INIT_LIST_HEAD(&idev->node);
        }

        shost = scsi_host_alloc(&isci_sht, sizeof(void *));
        if (!shost)
                return NULL;

        dev_info(&pdev->dev, "%sSCU controller %d: phy 3-0 cables: "
                 "{%s, %s, %s, %s}\n",
                 (is_cable_select_overridden() ? "* " : ""), ihost->id,
                 lookup_cable_names(decode_cable_selection(ihost, 3)),
                 lookup_cable_names(decode_cable_selection(ihost, 2)),
                 lookup_cable_names(decode_cable_selection(ihost, 1)),
                 lookup_cable_names(decode_cable_selection(ihost, 0)));

        err = isci_host_init(ihost);
        if (err)
                goto err_shost;

        SHOST_TO_SAS_HA(shost) = &ihost->sas_ha;
        ihost->sas_ha.core.shost = shost;
        shost->transportt = isci_transport_template;

        shost->max_id = ~0;
        shost->max_lun = ~0;
        shost->max_cmd_len = MAX_COMMAND_SIZE;

        /* turn on DIF support */
        scsi_host_set_prot(shost,
                           SHOST_DIF_TYPE1_PROTECTION |
                           SHOST_DIF_TYPE2_PROTECTION |
                           SHOST_DIF_TYPE3_PROTECTION);
        scsi_host_set_guard(shost, SHOST_DIX_GUARD_CRC);

        err = scsi_add_host(shost, &pdev->dev);
        if (err)
                goto err_shost;

        err = isci_register_sas_ha(ihost);
        if (err)
                goto err_shost_remove;

        return ihost;

 err_shost_remove:
        scsi_remove_host(shost);
 err_shost:
        scsi_host_put(shost);

        return NULL;
}

static int isci_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
{
        struct isci_pci_info *pci_info;
        int err, i;
        struct isci_host *isci_host;
        const struct firmware *fw = NULL;
        struct isci_orom *orom = NULL;
        char *source = "(platform)";

        dev_info(&pdev->dev, "driver configured for rev: %d silicon\n",
                 pdev->revision);

        pci_info = devm_kzalloc(&pdev->dev, sizeof(*pci_info), GFP_KERNEL);
        if (!pci_info)
                return -ENOMEM;
        pci_set_drvdata(pdev, pci_info);

        if (efi_enabled(EFI_RUNTIME_SERVICES))
                orom = isci_get_efi_var(pdev);

        if (!orom)
                orom = isci_request_oprom(pdev);

        for (i = 0; orom && i < num_controllers(pdev); i++) {
                if (sci_oem_parameters_validate(&orom->ctrl[i],
                                                orom->hdr.version)) {
                        dev_warn(&pdev->dev,
                                 "[%d]: invalid oem parameters detected, falling back to firmware\n", i);
                        orom = NULL;
                        break;
                }
        }

        if (!orom) {
                source = "(firmware)";
                orom = isci_request_firmware(pdev, fw);
                if (!orom) {
                        /* TODO convert this to WARN_TAINT_ONCE once the
                         * orom/efi parameter support is widely available
                         */
                        dev_warn(&pdev->dev,
                                 "Loading user firmware failed, using default "
                                 "values\n");
                        dev_warn(&pdev->dev,
                                 "Default OEM configuration being used: 4 "
                                 "narrow ports, and default SAS Addresses\n");
                }
        }

        if (orom)
                dev_info(&pdev->dev,
                         "OEM SAS parameters (version: %u.%u) loaded %s\n",
                         (orom->hdr.version & 0xf0) >> 4,
                         (orom->hdr.version & 0xf), source);

        pci_info->orom = orom;

        err = isci_pci_init(pdev);
        if (err)
                return err;

        for (i = 0; i < num_controllers(pdev); i++) {
                struct isci_host *h = isci_host_alloc(pdev, i);

                if (!h) {
                        err = -ENOMEM;
                        goto err_host_alloc;
                }
                pci_info->hosts[i] = h;
        }

        err = isci_setup_interrupts(pdev);
        if (err)
                goto err_host_alloc;

        for_each_isci_host(i, isci_host, pdev)
                scsi_scan_host(to_shost(isci_host));

        return 0;

 err_host_alloc:
        for_each_isci_host(i, isci_host, pdev)
                isci_unregister(isci_host);
        return err;
}

static void isci_pci_remove(struct pci_dev *pdev)
{
        struct isci_host *ihost;
        int i;

        for_each_isci_host(i, ihost, pdev) {
                wait_for_start(ihost);
                isci_unregister(ihost);
                isci_host_deinit(ihost);
        }
}

#ifdef CONFIG_PM_SLEEP
static int isci_suspend(struct device *dev)
{
        struct pci_dev *pdev = to_pci_dev(dev);
        struct isci_host *ihost;
        int i;

        for_each_isci_host(i, ihost, pdev) {
                sas_suspend_ha(&ihost->sas_ha);
                isci_host_deinit(ihost);
        }

        pci_save_state(pdev);
        pci_disable_device(pdev);
        pci_set_power_state(pdev, PCI_D3hot);

        return 0;
}

static int isci_resume(struct device *dev)
{
        struct pci_dev *pdev = to_pci_dev(dev);
        struct isci_host *ihost;
        int rc, i;

        pci_set_power_state(pdev, PCI_D0);
        pci_restore_state(pdev);

        rc = pcim_enable_device(pdev);
        if (rc) {
                dev_err(&pdev->dev,
                        "enabling device failure after resume(%d)\n", rc);
                return rc;
        }

        pci_set_master(pdev);

        for_each_isci_host(i, ihost, pdev) {
                sas_prep_resume_ha(&ihost->sas_ha);

                isci_host_init(ihost);
                isci_host_start(ihost->sas_ha.core.shost);
                wait_for_start(ihost);

                sas_resume_ha(&ihost->sas_ha);
        }

        return 0;
}
#endif

static SIMPLE_DEV_PM_OPS(isci_pm_ops, isci_suspend, isci_resume);

static struct pci_driver isci_pci_driver = {
        .name           = DRV_NAME,
        .id_table       = isci_id_table,
        .probe          = isci_pci_probe,
        .remove         = isci_pci_remove,
        .driver.pm      = &isci_pm_ops,
};

static __init int isci_init(void)
{
        int err;

        pr_info("%s: Intel(R) C600 SAS Controller Driver - version %s\n",
                DRV_NAME, DRV_VERSION);

        isci_transport_template = sas_domain_attach_transport(&isci_transport_ops);
        if (!isci_transport_template)
                return -ENOMEM;

        err = pci_register_driver(&isci_pci_driver);
        if (err)
                sas_release_transport(isci_transport_template);

        return err;
}

static __exit void isci_exit(void)
{
        pci_unregister_driver(&isci_pci_driver);
        sas_release_transport(isci_transport_template);
}

MODULE_LICENSE("Dual BSD/GPL");
MODULE_FIRMWARE(ISCI_FW_NAME);
module_init(isci_init);
module_exit(isci_exit);