linux/include/uapi/linux/atmdev.h
<<
>>
Prefs
   1/* atmdev.h - ATM device driver declarations and various related items */
   2 
   3/* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */
   4 
   5
   6#ifndef _UAPILINUX_ATMDEV_H
   7#define _UAPILINUX_ATMDEV_H
   8
   9
  10#include <linux/atmapi.h>
  11#include <linux/atm.h>
  12#include <linux/atmioc.h>
  13
  14
  15#define ESI_LEN         6
  16
  17#define ATM_OC3_PCR     (155520000/270*260/8/53)
  18                        /* OC3 link rate:  155520000 bps
  19                           SONET overhead: /270*260 (9 section, 1 path)
  20                           bits per cell:  /8/53
  21                           max cell rate:  353207.547 cells/sec */
  22#define ATM_25_PCR      ((25600000/8-8000)/54)
  23                        /* 25 Mbps ATM cell rate (59111) */
  24#define ATM_OC12_PCR    (622080000/1080*1040/8/53)
  25                        /* OC12 link rate: 622080000 bps
  26                           SONET overhead: /1080*1040
  27                           bits per cell:  /8/53
  28                           max cell rate:  1412830.188 cells/sec */
  29#define ATM_DS3_PCR     (8000*12)
  30                        /* DS3: 12 cells in a 125 usec time slot */
  31
  32
  33#define __AAL_STAT_ITEMS \
  34    __HANDLE_ITEM(tx);                  /* TX okay */ \
  35    __HANDLE_ITEM(tx_err);              /* TX errors */ \
  36    __HANDLE_ITEM(rx);                  /* RX okay */ \
  37    __HANDLE_ITEM(rx_err);              /* RX errors */ \
  38    __HANDLE_ITEM(rx_drop);             /* RX out of memory */
  39
  40struct atm_aal_stats {
  41#define __HANDLE_ITEM(i) int i
  42        __AAL_STAT_ITEMS
  43#undef __HANDLE_ITEM
  44};
  45
  46
  47struct atm_dev_stats {
  48        struct atm_aal_stats aal0;
  49        struct atm_aal_stats aal34;
  50        struct atm_aal_stats aal5;
  51} __ATM_API_ALIGN;
  52
  53
  54#define ATM_GETLINKRATE _IOW('a',ATMIOC_ITF+1,struct atmif_sioc)
  55                                        /* get link rate */
  56#define ATM_GETNAMES    _IOW('a',ATMIOC_ITF+3,struct atm_iobuf)
  57                                        /* get interface names (numbers) */
  58#define ATM_GETTYPE     _IOW('a',ATMIOC_ITF+4,struct atmif_sioc)
  59                                        /* get interface type name */
  60#define ATM_GETESI      _IOW('a',ATMIOC_ITF+5,struct atmif_sioc)
  61                                        /* get interface ESI */
  62#define ATM_GETADDR     _IOW('a',ATMIOC_ITF+6,struct atmif_sioc)
  63                                        /* get itf's local ATM addr. list */
  64#define ATM_RSTADDR     _IOW('a',ATMIOC_ITF+7,struct atmif_sioc)
  65                                        /* reset itf's ATM address list */
  66#define ATM_ADDADDR     _IOW('a',ATMIOC_ITF+8,struct atmif_sioc)
  67                                        /* add a local ATM address */
  68#define ATM_DELADDR     _IOW('a',ATMIOC_ITF+9,struct atmif_sioc)
  69                                        /* remove a local ATM address */
  70#define ATM_GETCIRANGE  _IOW('a',ATMIOC_ITF+10,struct atmif_sioc)
  71                                        /* get connection identifier range */
  72#define ATM_SETCIRANGE  _IOW('a',ATMIOC_ITF+11,struct atmif_sioc)
  73                                        /* set connection identifier range */
  74#define ATM_SETESI      _IOW('a',ATMIOC_ITF+12,struct atmif_sioc)
  75                                        /* set interface ESI */
  76#define ATM_SETESIF     _IOW('a',ATMIOC_ITF+13,struct atmif_sioc)
  77                                        /* force interface ESI */
  78#define ATM_ADDLECSADDR _IOW('a', ATMIOC_ITF+14, struct atmif_sioc)
  79                                        /* register a LECS address */
  80#define ATM_DELLECSADDR _IOW('a', ATMIOC_ITF+15, struct atmif_sioc)
  81                                        /* unregister a LECS address */
  82#define ATM_GETLECSADDR _IOW('a', ATMIOC_ITF+16, struct atmif_sioc)
  83                                        /* retrieve LECS address(es) */
  84
  85#define ATM_GETSTAT     _IOW('a',ATMIOC_SARCOM+0,struct atmif_sioc)
  86                                        /* get AAL layer statistics */
  87#define ATM_GETSTATZ    _IOW('a',ATMIOC_SARCOM+1,struct atmif_sioc)
  88                                        /* get AAL layer statistics and zero */
  89#define ATM_GETLOOP     _IOW('a',ATMIOC_SARCOM+2,struct atmif_sioc)
  90                                        /* get loopback mode */
  91#define ATM_SETLOOP     _IOW('a',ATMIOC_SARCOM+3,struct atmif_sioc)
  92                                        /* set loopback mode */
  93#define ATM_QUERYLOOP   _IOW('a',ATMIOC_SARCOM+4,struct atmif_sioc)
  94                                        /* query supported loopback modes */
  95#define ATM_SETSC       _IOW('a',ATMIOC_SPECIAL+1,int)
  96                                        /* enable or disable single-copy */
  97#define ATM_SETBACKEND  _IOW('a',ATMIOC_SPECIAL+2,atm_backend_t)
  98                                        /* set backend handler */
  99#define ATM_NEWBACKENDIF _IOW('a',ATMIOC_SPECIAL+3,atm_backend_t)
 100                                        /* use backend to make new if */
 101#define ATM_ADDPARTY    _IOW('a', ATMIOC_SPECIAL+4,struct atm_iobuf)
 102                                        /* add party to p2mp call */
 103#ifdef CONFIG_COMPAT
 104/* It actually takes struct sockaddr_atmsvc, not struct atm_iobuf */
 105#define COMPAT_ATM_ADDPARTY     _IOW('a', ATMIOC_SPECIAL+4,struct compat_atm_iobuf)
 106#endif
 107#define ATM_DROPPARTY   _IOW('a', ATMIOC_SPECIAL+5,int)
 108                                        /* drop party from p2mp call */
 109
 110/*
 111 * These are backend handkers that can be set via the ATM_SETBACKEND call
 112 * above.  In the future we may support dynamic loading of these - for now,
 113 * they're just being used to share the ATMIOC_BACKEND ioctls
 114 */
 115#define ATM_BACKEND_RAW         0       
 116#define ATM_BACKEND_PPP         1       /* PPPoATM - RFC2364 */
 117#define ATM_BACKEND_BR2684      2       /* Bridged RFC1483/2684 */
 118
 119/* for ATM_GETTYPE */
 120#define ATM_ITFTYP_LEN  8       /* maximum length of interface type name */
 121
 122/*
 123 * Loopback modes for ATM_{PHY,SAR}_{GET,SET}LOOP
 124 */
 125
 126/* Point of loopback                            CPU-->SAR-->PHY-->line--> ... */
 127#define __ATM_LM_NONE   0       /* no loop back     ^     ^     ^      ^      */
 128#define __ATM_LM_AAL    1       /* loop back PDUs --'     |     |      |      */
 129#define __ATM_LM_ATM    2       /* loop back ATM cells ---'     |      |      */
 130/* RESERVED             4       loop back on PHY side  ---'                   */
 131#define __ATM_LM_PHY    8       /* loop back bits (digital) ----'      |      */
 132#define __ATM_LM_ANALOG 16      /* loop back the analog signal --------'      */
 133
 134/* Direction of loopback */
 135#define __ATM_LM_MKLOC(n)       ((n))       /* Local (i.e. loop TX to RX) */
 136#define __ATM_LM_MKRMT(n)       ((n) << 8)  /* Remote (i.e. loop RX to TX) */
 137
 138#define __ATM_LM_XTLOC(n)       ((n) & 0xff)
 139#define __ATM_LM_XTRMT(n)       (((n) >> 8) & 0xff)
 140
 141#define ATM_LM_NONE     0       /* no loopback */
 142
 143#define ATM_LM_LOC_AAL  __ATM_LM_MKLOC(__ATM_LM_AAL)
 144#define ATM_LM_LOC_ATM  __ATM_LM_MKLOC(__ATM_LM_ATM)
 145#define ATM_LM_LOC_PHY  __ATM_LM_MKLOC(__ATM_LM_PHY)
 146#define ATM_LM_LOC_ANALOG __ATM_LM_MKLOC(__ATM_LM_ANALOG)
 147
 148#define ATM_LM_RMT_AAL  __ATM_LM_MKRMT(__ATM_LM_AAL)
 149#define ATM_LM_RMT_ATM  __ATM_LM_MKRMT(__ATM_LM_ATM)
 150#define ATM_LM_RMT_PHY  __ATM_LM_MKRMT(__ATM_LM_PHY)
 151#define ATM_LM_RMT_ANALOG __ATM_LM_MKRMT(__ATM_LM_ANALOG)
 152
 153/*
 154 * Note: ATM_LM_LOC_* and ATM_LM_RMT_* can be combined, provided that
 155 * __ATM_LM_XTLOC(x) <= __ATM_LM_XTRMT(x)
 156 */
 157
 158
 159struct atm_iobuf {
 160        int length;
 161        void __user *buffer;
 162};
 163
 164/* for ATM_GETCIRANGE / ATM_SETCIRANGE */
 165
 166#define ATM_CI_MAX      -1              /* use maximum range of VPI/VCI */
 167 
 168struct atm_cirange {
 169        signed char     vpi_bits;       /* 1..8, ATM_CI_MAX (-1) for maximum */
 170        signed char     vci_bits;       /* 1..16, ATM_CI_MAX (-1) for maximum */
 171};
 172
 173/* for ATM_SETSC; actually taken from the ATM_VF number space */
 174
 175#define ATM_SC_RX       1024            /* enable RX single-copy */
 176#define ATM_SC_TX       2048            /* enable TX single-copy */
 177
 178#define ATM_BACKLOG_DEFAULT 32 /* if we get more, we're likely to time out
 179                                  anyway */
 180
 181/* MF: change_qos (Modify) flags */
 182
 183#define ATM_MF_IMMED     1      /* Block until change is effective */
 184#define ATM_MF_INC_RSV   2      /* Change reservation on increase */
 185#define ATM_MF_INC_SHP   4      /* Change shaping on increase */
 186#define ATM_MF_DEC_RSV   8      /* Change reservation on decrease */
 187#define ATM_MF_DEC_SHP  16      /* Change shaping on decrease */
 188#define ATM_MF_BWD      32      /* Set the backward direction parameters */
 189
 190#define ATM_MF_SET      (ATM_MF_INC_RSV | ATM_MF_INC_SHP | ATM_MF_DEC_RSV | \
 191                          ATM_MF_DEC_SHP | ATM_MF_BWD)
 192
 193/*
 194 * ATM_VS_* are used to express VC state in a human-friendly way.
 195 */
 196
 197#define ATM_VS_IDLE     0       /* VC is not used */
 198#define ATM_VS_CONNECTED 1      /* VC is connected */
 199#define ATM_VS_CLOSING  2       /* VC is closing */
 200#define ATM_VS_LISTEN   3       /* VC is listening for incoming setups */
 201#define ATM_VS_INUSE    4       /* VC is in use (registered with atmsigd) */
 202#define ATM_VS_BOUND    5       /* VC is bound */
 203
 204#define ATM_VS2TXT_MAP \
 205    "IDLE", "CONNECTED", "CLOSING", "LISTEN", "INUSE", "BOUND"
 206
 207#define ATM_VF2TXT_MAP \
 208    "ADDR",     "READY",        "PARTIAL",      "REGIS", \
 209    "RELEASED", "HASQOS",       "LISTEN",       "META", \
 210    "256",      "512",          "1024",         "2048", \
 211    "SESSION",  "HASSAP",       "BOUND",        "CLOSE"
 212
 213
 214
 215#endif /* _UAPILINUX_ATMDEV_H */
 216