linux/arch/arm/mach-omap1/lcd_dma.c
<<
>>
Prefs
   1/*
   2 * linux/arch/arm/mach-omap1/lcd_dma.c
   3 *
   4 * Extracted from arch/arm/plat-omap/dma.c
   5 * Copyright (C) 2003 - 2008 Nokia Corporation
   6 * Author: Juha Yrjölä <juha.yrjola@nokia.com>
   7 * DMA channel linking for 1610 by Samuel Ortiz <samuel.ortiz@nokia.com>
   8 * Graphics DMA and LCD DMA graphics tranformations
   9 * by Imre Deak <imre.deak@nokia.com>
  10 * OMAP2/3 support Copyright (C) 2004-2007 Texas Instruments, Inc.
  11 * Merged to support both OMAP1 and OMAP2 by Tony Lindgren <tony@atomide.com>
  12 * Some functions based on earlier dma-omap.c Copyright (C) 2001 RidgeRun, Inc.
  13 *
  14 * Copyright (C) 2009 Texas Instruments
  15 * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
  16 *
  17 * Support functions for the OMAP internal DMA channels.
  18 *
  19 * This program is free software; you can redistribute it and/or modify
  20 * it under the terms of the GNU General Public License version 2 as
  21 * published by the Free Software Foundation.
  22 *
  23 */
  24
  25#include <linux/module.h>
  26#include <linux/spinlock.h>
  27#include <linux/interrupt.h>
  28#include <linux/io.h>
  29
  30#include <linux/omap-dma.h>
  31
  32#include <mach/hardware.h>
  33#include <mach/lcdc.h>
  34
  35#include "dma.h"
  36
  37int omap_lcd_dma_running(void)
  38{
  39        /*
  40         * On OMAP1510, internal LCD controller will start the transfer
  41         * when it gets enabled, so assume DMA running if LCD enabled.
  42         */
  43        if (cpu_is_omap15xx())
  44                if (omap_readw(OMAP_LCDC_CONTROL) & OMAP_LCDC_CTRL_LCD_EN)
  45                        return 1;
  46
  47        /* Check if LCD DMA is running */
  48        if (cpu_is_omap16xx())
  49                if (omap_readw(OMAP1610_DMA_LCD_CCR) & OMAP_DMA_CCR_EN)
  50                        return 1;
  51
  52        return 0;
  53}
  54
  55static struct lcd_dma_info {
  56        spinlock_t lock;
  57        int reserved;
  58        void (*callback)(u16 status, void *data);
  59        void *cb_data;
  60
  61        int active;
  62        unsigned long addr;
  63        int rotate, data_type, xres, yres;
  64        int vxres;
  65        int mirror;
  66        int xscale, yscale;
  67        int ext_ctrl;
  68        int src_port;
  69        int single_transfer;
  70} lcd_dma;
  71
  72void omap_set_lcd_dma_b1(unsigned long addr, u16 fb_xres, u16 fb_yres,
  73                         int data_type)
  74{
  75        lcd_dma.addr = addr;
  76        lcd_dma.data_type = data_type;
  77        lcd_dma.xres = fb_xres;
  78        lcd_dma.yres = fb_yres;
  79}
  80EXPORT_SYMBOL(omap_set_lcd_dma_b1);
  81
  82void omap_set_lcd_dma_ext_controller(int external)
  83{
  84        lcd_dma.ext_ctrl = external;
  85}
  86EXPORT_SYMBOL(omap_set_lcd_dma_ext_controller);
  87
  88void omap_set_lcd_dma_single_transfer(int single)
  89{
  90        lcd_dma.single_transfer = single;
  91}
  92EXPORT_SYMBOL(omap_set_lcd_dma_single_transfer);
  93
  94void omap_set_lcd_dma_b1_rotation(int rotate)
  95{
  96        if (cpu_is_omap15xx()) {
  97                printk(KERN_ERR "DMA rotation is not supported in 1510 mode\n");
  98                BUG();
  99                return;
 100        }
 101        lcd_dma.rotate = rotate;
 102}
 103EXPORT_SYMBOL(omap_set_lcd_dma_b1_rotation);
 104
 105void omap_set_lcd_dma_b1_mirror(int mirror)
 106{
 107        if (cpu_is_omap15xx()) {
 108                printk(KERN_ERR "DMA mirror is not supported in 1510 mode\n");
 109                BUG();
 110        }
 111        lcd_dma.mirror = mirror;
 112}
 113EXPORT_SYMBOL(omap_set_lcd_dma_b1_mirror);
 114
 115void omap_set_lcd_dma_b1_vxres(unsigned long vxres)
 116{
 117        if (cpu_is_omap15xx()) {
 118                pr_err("DMA virtual resolution is not supported in 1510 mode\n");
 119                BUG();
 120        }
 121        lcd_dma.vxres = vxres;
 122}
 123EXPORT_SYMBOL(omap_set_lcd_dma_b1_vxres);
 124
 125void omap_set_lcd_dma_b1_scale(unsigned int xscale, unsigned int yscale)
 126{
 127        if (cpu_is_omap15xx()) {
 128                printk(KERN_ERR "DMA scale is not supported in 1510 mode\n");
 129                BUG();
 130        }
 131        lcd_dma.xscale = xscale;
 132        lcd_dma.yscale = yscale;
 133}
 134EXPORT_SYMBOL(omap_set_lcd_dma_b1_scale);
 135
 136static void set_b1_regs(void)
 137{
 138        unsigned long top, bottom;
 139        int es;
 140        u16 w;
 141        unsigned long en, fn;
 142        long ei, fi;
 143        unsigned long vxres;
 144        unsigned int xscale, yscale;
 145
 146        switch (lcd_dma.data_type) {
 147        case OMAP_DMA_DATA_TYPE_S8:
 148                es = 1;
 149                break;
 150        case OMAP_DMA_DATA_TYPE_S16:
 151                es = 2;
 152                break;
 153        case OMAP_DMA_DATA_TYPE_S32:
 154                es = 4;
 155                break;
 156        default:
 157                BUG();
 158                return;
 159        }
 160
 161        vxres = lcd_dma.vxres ? lcd_dma.vxres : lcd_dma.xres;
 162        xscale = lcd_dma.xscale ? lcd_dma.xscale : 1;
 163        yscale = lcd_dma.yscale ? lcd_dma.yscale : 1;
 164        BUG_ON(vxres < lcd_dma.xres);
 165
 166#define PIXADDR(x, y) (lcd_dma.addr +                                   \
 167                ((y) * vxres * yscale + (x) * xscale) * es)
 168#define PIXSTEP(sx, sy, dx, dy) (PIXADDR(dx, dy) - PIXADDR(sx, sy) - es + 1)
 169
 170        switch (lcd_dma.rotate) {
 171        case 0:
 172                if (!lcd_dma.mirror) {
 173                        top = PIXADDR(0, 0);
 174                        bottom = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1);
 175                        /* 1510 DMA requires the bottom address to be 2 more
 176                         * than the actual last memory access location. */
 177                        if (cpu_is_omap15xx() &&
 178                                lcd_dma.data_type == OMAP_DMA_DATA_TYPE_S32)
 179                                        bottom += 2;
 180                        ei = PIXSTEP(0, 0, 1, 0);
 181                        fi = PIXSTEP(lcd_dma.xres - 1, 0, 0, 1);
 182                } else {
 183                        top = PIXADDR(lcd_dma.xres - 1, 0);
 184                        bottom = PIXADDR(0, lcd_dma.yres - 1);
 185                        ei = PIXSTEP(1, 0, 0, 0);
 186                        fi = PIXSTEP(0, 0, lcd_dma.xres - 1, 1);
 187                }
 188                en = lcd_dma.xres;
 189                fn = lcd_dma.yres;
 190                break;
 191        case 90:
 192                if (!lcd_dma.mirror) {
 193                        top = PIXADDR(0, lcd_dma.yres - 1);
 194                        bottom = PIXADDR(lcd_dma.xres - 1, 0);
 195                        ei = PIXSTEP(0, 1, 0, 0);
 196                        fi = PIXSTEP(0, 0, 1, lcd_dma.yres - 1);
 197                } else {
 198                        top = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1);
 199                        bottom = PIXADDR(0, 0);
 200                        ei = PIXSTEP(0, 1, 0, 0);
 201                        fi = PIXSTEP(1, 0, 0, lcd_dma.yres - 1);
 202                }
 203                en = lcd_dma.yres;
 204                fn = lcd_dma.xres;
 205                break;
 206        case 180:
 207                if (!lcd_dma.mirror) {
 208                        top = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1);
 209                        bottom = PIXADDR(0, 0);
 210                        ei = PIXSTEP(1, 0, 0, 0);
 211                        fi = PIXSTEP(0, 1, lcd_dma.xres - 1, 0);
 212                } else {
 213                        top = PIXADDR(0, lcd_dma.yres - 1);
 214                        bottom = PIXADDR(lcd_dma.xres - 1, 0);
 215                        ei = PIXSTEP(0, 0, 1, 0);
 216                        fi = PIXSTEP(lcd_dma.xres - 1, 1, 0, 0);
 217                }
 218                en = lcd_dma.xres;
 219                fn = lcd_dma.yres;
 220                break;
 221        case 270:
 222                if (!lcd_dma.mirror) {
 223                        top = PIXADDR(lcd_dma.xres - 1, 0);
 224                        bottom = PIXADDR(0, lcd_dma.yres - 1);
 225                        ei = PIXSTEP(0, 0, 0, 1);
 226                        fi = PIXSTEP(1, lcd_dma.yres - 1, 0, 0);
 227                } else {
 228                        top = PIXADDR(0, 0);
 229                        bottom = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1);
 230                        ei = PIXSTEP(0, 0, 0, 1);
 231                        fi = PIXSTEP(0, lcd_dma.yres - 1, 1, 0);
 232                }
 233                en = lcd_dma.yres;
 234                fn = lcd_dma.xres;
 235                break;
 236        default:
 237                BUG();
 238                return; /* Suppress warning about uninitialized vars */
 239        }
 240
 241        if (cpu_is_omap15xx()) {
 242                omap_writew(top >> 16, OMAP1510_DMA_LCD_TOP_F1_U);
 243                omap_writew(top, OMAP1510_DMA_LCD_TOP_F1_L);
 244                omap_writew(bottom >> 16, OMAP1510_DMA_LCD_BOT_F1_U);
 245                omap_writew(bottom, OMAP1510_DMA_LCD_BOT_F1_L);
 246
 247                return;
 248        }
 249
 250        /* 1610 regs */
 251        omap_writew(top >> 16, OMAP1610_DMA_LCD_TOP_B1_U);
 252        omap_writew(top, OMAP1610_DMA_LCD_TOP_B1_L);
 253        omap_writew(bottom >> 16, OMAP1610_DMA_LCD_BOT_B1_U);
 254        omap_writew(bottom, OMAP1610_DMA_LCD_BOT_B1_L);
 255
 256        omap_writew(en, OMAP1610_DMA_LCD_SRC_EN_B1);
 257        omap_writew(fn, OMAP1610_DMA_LCD_SRC_FN_B1);
 258
 259        w = omap_readw(OMAP1610_DMA_LCD_CSDP);
 260        w &= ~0x03;
 261        w |= lcd_dma.data_type;
 262        omap_writew(w, OMAP1610_DMA_LCD_CSDP);
 263
 264        w = omap_readw(OMAP1610_DMA_LCD_CTRL);
 265        /* Always set the source port as SDRAM for now*/
 266        w &= ~(0x03 << 6);
 267        if (lcd_dma.callback != NULL)
 268                w |= 1 << 1;            /* Block interrupt enable */
 269        else
 270                w &= ~(1 << 1);
 271        omap_writew(w, OMAP1610_DMA_LCD_CTRL);
 272
 273        if (!(lcd_dma.rotate || lcd_dma.mirror ||
 274              lcd_dma.vxres || lcd_dma.xscale || lcd_dma.yscale))
 275                return;
 276
 277        w = omap_readw(OMAP1610_DMA_LCD_CCR);
 278        /* Set the double-indexed addressing mode */
 279        w |= (0x03 << 12);
 280        omap_writew(w, OMAP1610_DMA_LCD_CCR);
 281
 282        omap_writew(ei, OMAP1610_DMA_LCD_SRC_EI_B1);
 283        omap_writew(fi >> 16, OMAP1610_DMA_LCD_SRC_FI_B1_U);
 284        omap_writew(fi, OMAP1610_DMA_LCD_SRC_FI_B1_L);
 285}
 286
 287static irqreturn_t lcd_dma_irq_handler(int irq, void *dev_id)
 288{
 289        u16 w;
 290
 291        w = omap_readw(OMAP1610_DMA_LCD_CTRL);
 292        if (unlikely(!(w & (1 << 3)))) {
 293                printk(KERN_WARNING "Spurious LCD DMA IRQ\n");
 294                return IRQ_NONE;
 295        }
 296        /* Ack the IRQ */
 297        w |= (1 << 3);
 298        omap_writew(w, OMAP1610_DMA_LCD_CTRL);
 299        lcd_dma.active = 0;
 300        if (lcd_dma.callback != NULL)
 301                lcd_dma.callback(w, lcd_dma.cb_data);
 302
 303        return IRQ_HANDLED;
 304}
 305
 306int omap_request_lcd_dma(void (*callback)(u16 status, void *data),
 307                         void *data)
 308{
 309        spin_lock_irq(&lcd_dma.lock);
 310        if (lcd_dma.reserved) {
 311                spin_unlock_irq(&lcd_dma.lock);
 312                printk(KERN_ERR "LCD DMA channel already reserved\n");
 313                BUG();
 314                return -EBUSY;
 315        }
 316        lcd_dma.reserved = 1;
 317        spin_unlock_irq(&lcd_dma.lock);
 318        lcd_dma.callback = callback;
 319        lcd_dma.cb_data = data;
 320        lcd_dma.active = 0;
 321        lcd_dma.single_transfer = 0;
 322        lcd_dma.rotate = 0;
 323        lcd_dma.vxres = 0;
 324        lcd_dma.mirror = 0;
 325        lcd_dma.xscale = 0;
 326        lcd_dma.yscale = 0;
 327        lcd_dma.ext_ctrl = 0;
 328        lcd_dma.src_port = 0;
 329
 330        return 0;
 331}
 332EXPORT_SYMBOL(omap_request_lcd_dma);
 333
 334void omap_free_lcd_dma(void)
 335{
 336        spin_lock(&lcd_dma.lock);
 337        if (!lcd_dma.reserved) {
 338                spin_unlock(&lcd_dma.lock);
 339                printk(KERN_ERR "LCD DMA is not reserved\n");
 340                BUG();
 341                return;
 342        }
 343        if (!cpu_is_omap15xx())
 344                omap_writew(omap_readw(OMAP1610_DMA_LCD_CCR) & ~1,
 345                            OMAP1610_DMA_LCD_CCR);
 346        lcd_dma.reserved = 0;
 347        spin_unlock(&lcd_dma.lock);
 348}
 349EXPORT_SYMBOL(omap_free_lcd_dma);
 350
 351void omap_enable_lcd_dma(void)
 352{
 353        u16 w;
 354
 355        /*
 356         * Set the Enable bit only if an external controller is
 357         * connected. Otherwise the OMAP internal controller will
 358         * start the transfer when it gets enabled.
 359         */
 360        if (cpu_is_omap15xx() || !lcd_dma.ext_ctrl)
 361                return;
 362
 363        w = omap_readw(OMAP1610_DMA_LCD_CTRL);
 364        w |= 1 << 8;
 365        omap_writew(w, OMAP1610_DMA_LCD_CTRL);
 366
 367        lcd_dma.active = 1;
 368
 369        w = omap_readw(OMAP1610_DMA_LCD_CCR);
 370        w |= 1 << 7;
 371        omap_writew(w, OMAP1610_DMA_LCD_CCR);
 372}
 373EXPORT_SYMBOL(omap_enable_lcd_dma);
 374
 375void omap_setup_lcd_dma(void)
 376{
 377        BUG_ON(lcd_dma.active);
 378        if (!cpu_is_omap15xx()) {
 379                /* Set some reasonable defaults */
 380                omap_writew(0x5440, OMAP1610_DMA_LCD_CCR);
 381                omap_writew(0x9102, OMAP1610_DMA_LCD_CSDP);
 382                omap_writew(0x0004, OMAP1610_DMA_LCD_LCH_CTRL);
 383        }
 384        set_b1_regs();
 385        if (!cpu_is_omap15xx()) {
 386                u16 w;
 387
 388                w = omap_readw(OMAP1610_DMA_LCD_CCR);
 389                /*
 390                 * If DMA was already active set the end_prog bit to have
 391                 * the programmed register set loaded into the active
 392                 * register set.
 393                 */
 394                w |= 1 << 11;           /* End_prog */
 395                if (!lcd_dma.single_transfer)
 396                        w |= (3 << 8);  /* Auto_init, repeat */
 397                omap_writew(w, OMAP1610_DMA_LCD_CCR);
 398        }
 399}
 400EXPORT_SYMBOL(omap_setup_lcd_dma);
 401
 402void omap_stop_lcd_dma(void)
 403{
 404        u16 w;
 405
 406        lcd_dma.active = 0;
 407        if (cpu_is_omap15xx() || !lcd_dma.ext_ctrl)
 408                return;
 409
 410        w = omap_readw(OMAP1610_DMA_LCD_CCR);
 411        w &= ~(1 << 7);
 412        omap_writew(w, OMAP1610_DMA_LCD_CCR);
 413
 414        w = omap_readw(OMAP1610_DMA_LCD_CTRL);
 415        w &= ~(1 << 8);
 416        omap_writew(w, OMAP1610_DMA_LCD_CTRL);
 417}
 418EXPORT_SYMBOL(omap_stop_lcd_dma);
 419
 420static int __init omap_init_lcd_dma(void)
 421{
 422        int r;
 423
 424        if (!cpu_class_is_omap1())
 425                return -ENODEV;
 426
 427        if (cpu_is_omap16xx()) {
 428                u16 w;
 429
 430                /* this would prevent OMAP sleep */
 431                w = omap_readw(OMAP1610_DMA_LCD_CTRL);
 432                w &= ~(1 << 8);
 433                omap_writew(w, OMAP1610_DMA_LCD_CTRL);
 434        }
 435
 436        spin_lock_init(&lcd_dma.lock);
 437
 438        r = request_irq(INT_DMA_LCD, lcd_dma_irq_handler, 0,
 439                        "LCD DMA", NULL);
 440        if (r != 0)
 441                pr_err("unable to request IRQ for LCD DMA (error %d)\n", r);
 442
 443        return r;
 444}
 445
 446arch_initcall(omap_init_lcd_dma);
 447
 448