linux/arch/arm/mach-ux500/db8500-regs.h
<<
>>
Prefs
   1/*
   2 * Copyright (C) ST-Ericsson SA 2010
   3 *
   4 * License terms: GNU General Public License (GPL) version 2
   5 */
   6
   7#ifndef __MACH_DB8500_REGS_H
   8#define __MACH_DB8500_REGS_H
   9
  10/* Base address and bank offsets for ESRAM */
  11#define U8500_ESRAM_BASE        0x40000000
  12#define U8500_ESRAM_BANK_SIZE   0x00020000
  13#define U8500_ESRAM_BANK0       U8500_ESRAM_BASE
  14#define U8500_ESRAM_BANK1       (U8500_ESRAM_BASE + U8500_ESRAM_BANK_SIZE)
  15#define U8500_ESRAM_BANK2       (U8500_ESRAM_BANK1 + U8500_ESRAM_BANK_SIZE)
  16#define U8500_ESRAM_BANK3       (U8500_ESRAM_BANK2 + U8500_ESRAM_BANK_SIZE)
  17#define U8500_ESRAM_BANK4       (U8500_ESRAM_BANK3 + U8500_ESRAM_BANK_SIZE)
  18/*
  19 * on V1 DMA uses 4KB for logical parameters position is right after the 64KB
  20 * reserved for security
  21 */
  22#define U8500_ESRAM_DMA_LCPA_OFFSET     0x10000
  23
  24#define U8500_DMA_LCPA_BASE    (U8500_ESRAM_BANK0 + U8500_ESRAM_DMA_LCPA_OFFSET)
  25
  26/* This address fulfills the 256k alignment requirement of the lcla base */
  27#define U8500_DMA_LCLA_BASE     U8500_ESRAM_BANK4
  28
  29#define U8500_PER3_BASE         0x80000000
  30#define U8500_STM_BASE          0x80100000
  31#define U8500_STM_REG_BASE      (U8500_STM_BASE + 0xF000)
  32#define U8500_PER2_BASE         0x80110000
  33#define U8500_PER1_BASE         0x80120000
  34#define U8500_B2R2_BASE         0x80130000
  35#define U8500_HSEM_BASE         0x80140000
  36#define U8500_PER4_BASE         0x80150000
  37#define U8500_TPIU_BASE         0x80190000
  38#define U8500_ICN_BASE          0x81000000
  39
  40#define U8500_BOOT_ROM_BASE     0x90000000
  41/* ASIC ID is at 0xbf4 offset within this region */
  42#define U8500_ASIC_ID_BASE      0x9001D000
  43
  44#define U9540_BOOT_ROM_BASE     0xFFFE0000
  45/* ASIC ID is at 0xbf4 offset within this region */
  46#define U9540_ASIC_ID_BASE      0xFFFFD000
  47
  48#define U8500_PER6_BASE         0xa03c0000
  49#define U8500_PER7_BASE         0xa03d0000
  50#define U8500_PER5_BASE         0xa03e0000
  51
  52#define U8500_SVA_BASE          0xa0100000
  53#define U8500_SIA_BASE          0xa0200000
  54
  55#define U8500_SGA_BASE          0xa0300000
  56#define U8500_MCDE_BASE         0xa0350000
  57#define U8500_DMA_BASE          0x801C0000      /* v1 */
  58
  59#define U8500_SBAG_BASE         0xa0390000
  60
  61#define U8500_SCU_BASE          0xa0410000
  62#define U8500_GIC_CPU_BASE      0xa0410100
  63#define U8500_TWD_BASE          0xa0410600
  64#define U8500_GIC_DIST_BASE     0xa0411000
  65#define U8500_L2CC_BASE         0xa0412000
  66
  67#define U8500_MODEM_I2C         0xb7e02000
  68
  69#define U8500_GPIO0_BASE        (U8500_PER1_BASE + 0xE000)
  70#define U8500_GPIO1_BASE        (U8500_PER3_BASE + 0xE000)
  71#define U8500_GPIO2_BASE        (U8500_PER2_BASE + 0xE000)
  72#define U8500_GPIO3_BASE        (U8500_PER5_BASE + 0x1E000)
  73
  74#define U8500_UART0_BASE        (U8500_PER1_BASE + 0x0000)
  75#define U8500_UART1_BASE        (U8500_PER1_BASE + 0x1000)
  76
  77/* per6 base addresses */
  78#define U8500_RNG_BASE          (U8500_PER6_BASE + 0x0000)
  79#define U8500_HASH0_BASE        (U8500_PER6_BASE + 0x1000)
  80#define U8500_HASH1_BASE        (U8500_PER6_BASE + 0x2000)
  81#define U8500_PKA_BASE          (U8500_PER6_BASE + 0x4000)
  82#define U8500_PKAM_BASE         (U8500_PER6_BASE + 0x5100)
  83#define U8500_MTU0_BASE         (U8500_PER6_BASE + 0x6000) /* v1 */
  84#define U8500_MTU1_BASE         (U8500_PER6_BASE + 0x7000) /* v1 */
  85#define U8500_CR_BASE           (U8500_PER6_BASE + 0x8000) /* v1 */
  86#define U8500_CRYP0_BASE        (U8500_PER6_BASE + 0xa000)
  87#define U8500_CRYP1_BASE        (U8500_PER6_BASE + 0xb000)
  88#define U8500_CLKRST6_BASE      (U8500_PER6_BASE + 0xf000)
  89
  90/* per5 base addresses */
  91#define U8500_USBOTG_BASE       (U8500_PER5_BASE + 0x00000)
  92#define U8500_CLKRST5_BASE      (U8500_PER5_BASE + 0x1f000)
  93
  94/* per4 base addresses */
  95#define U8500_BACKUPRAM0_BASE   (U8500_PER4_BASE + 0x00000)
  96#define U8500_BACKUPRAM1_BASE   (U8500_PER4_BASE + 0x01000)
  97#define U8500_RTT0_BASE         (U8500_PER4_BASE + 0x02000)
  98#define U8500_RTT1_BASE         (U8500_PER4_BASE + 0x03000)
  99#define U8500_RTC_BASE          (U8500_PER4_BASE + 0x04000)
 100#define U8500_SCR_BASE          (U8500_PER4_BASE + 0x05000)
 101#define U8500_DMC_BASE          (U8500_PER4_BASE + 0x06000)
 102#define U8500_PRCMU_BASE        (U8500_PER4_BASE + 0x07000)
 103#define U9540_DMC1_BASE         (U8500_PER4_BASE + 0x0A000)
 104#define U8500_PRCMU_TCDM_BASE   (U8500_PER4_BASE + 0x68000)
 105#define U9540_PRCMU_TCDM_BASE   (U8500_PER4_BASE + 0x6A000)
 106#define U8500_PRCMU_TCPM_BASE   (U8500_PER4_BASE + 0x60000)
 107#define U8500_PRCMU_TIMER_3_BASE (U8500_PER4_BASE + 0x07338)
 108#define U8500_PRCMU_TIMER_4_BASE (U8500_PER4_BASE + 0x07450)
 109
 110/* per3 base addresses */
 111#define U8500_FSMC_BASE         (U8500_PER3_BASE + 0x0000)
 112#define U8500_SSP0_BASE         (U8500_PER3_BASE + 0x2000)
 113#define U8500_SSP1_BASE         (U8500_PER3_BASE + 0x3000)
 114#define U8500_I2C0_BASE         (U8500_PER3_BASE + 0x4000)
 115#define U8500_SDI2_BASE         (U8500_PER3_BASE + 0x5000)
 116#define U8500_SKE_BASE          (U8500_PER3_BASE + 0x6000)
 117#define U8500_UART2_BASE        (U8500_PER3_BASE + 0x7000)
 118#define U8500_SDI5_BASE         (U8500_PER3_BASE + 0x8000)
 119#define U8500_CLKRST3_BASE      (U8500_PER3_BASE + 0xf000)
 120
 121/* per2 base addresses */
 122#define U8500_I2C3_BASE         (U8500_PER2_BASE + 0x0000)
 123#define U8500_SPI2_BASE         (U8500_PER2_BASE + 0x1000)
 124#define U8500_SPI1_BASE         (U8500_PER2_BASE + 0x2000)
 125#define U8500_PWL_BASE          (U8500_PER2_BASE + 0x3000)
 126#define U8500_SDI4_BASE         (U8500_PER2_BASE + 0x4000)
 127#define U8500_MSP2_BASE         (U8500_PER2_BASE + 0x7000)
 128#define U8500_SDI1_BASE         (U8500_PER2_BASE + 0x8000)
 129#define U8500_SDI3_BASE         (U8500_PER2_BASE + 0x9000)
 130#define U8500_SPI0_BASE         (U8500_PER2_BASE + 0xa000)
 131#define U8500_HSIR_BASE         (U8500_PER2_BASE + 0xb000)
 132#define U8500_HSIT_BASE         (U8500_PER2_BASE + 0xc000)
 133#define U8500_CLKRST2_BASE      (U8500_PER2_BASE + 0xf000)
 134
 135/* per1 base addresses */
 136#define U8500_I2C1_BASE         (U8500_PER1_BASE + 0x2000)
 137#define U8500_MSP0_BASE         (U8500_PER1_BASE + 0x3000)
 138#define U8500_MSP1_BASE         (U8500_PER1_BASE + 0x4000)
 139#define U8500_MSP3_BASE         (U8500_PER1_BASE + 0x5000)
 140#define U8500_SDI0_BASE         (U8500_PER1_BASE + 0x6000)
 141#define U8500_I2C2_BASE         (U8500_PER1_BASE + 0x8000)
 142#define U8500_SPI3_BASE         (U8500_PER1_BASE + 0x9000)
 143#define U8500_I2C4_BASE         (U8500_PER1_BASE + 0xa000)
 144#define U8500_SLIM0_BASE        (U8500_PER1_BASE + 0xb000)
 145#define U8500_CLKRST1_BASE      (U8500_PER1_BASE + 0xf000)
 146
 147#define U8500_SHRM_GOP_INTERRUPT_BASE   0xB7C00040
 148
 149#define U8500_GPIOBANK0_BASE    U8500_GPIO0_BASE
 150#define U8500_GPIOBANK1_BASE    (U8500_GPIO0_BASE + 0x80)
 151#define U8500_GPIOBANK2_BASE    U8500_GPIO1_BASE
 152#define U8500_GPIOBANK3_BASE    (U8500_GPIO1_BASE + 0x80)
 153#define U8500_GPIOBANK4_BASE    (U8500_GPIO1_BASE + 0x100)
 154#define U8500_GPIOBANK5_BASE    (U8500_GPIO1_BASE + 0x180)
 155#define U8500_GPIOBANK6_BASE    U8500_GPIO2_BASE
 156#define U8500_GPIOBANK7_BASE    (U8500_GPIO2_BASE + 0x80)
 157#define U8500_GPIOBANK8_BASE    U8500_GPIO3_BASE
 158
 159#define U8500_MCDE_SIZE         0x1000
 160#define U8500_DSI_LINK_SIZE     0x1000
 161#define U8500_DSI_LINK1_BASE    (U8500_MCDE_BASE + U8500_MCDE_SIZE)
 162#define U8500_DSI_LINK2_BASE    (U8500_DSI_LINK1_BASE + U8500_DSI_LINK_SIZE)
 163#define U8500_DSI_LINK3_BASE    (U8500_DSI_LINK2_BASE + U8500_DSI_LINK_SIZE)
 164#define U8500_DSI_LINK_COUNT    0x3
 165
 166/* Modem and APE physical addresses */
 167#define U8500_MODEM_BASE        0xe000000
 168#define U8500_APE_BASE          0x6000000
 169
 170/* SoC identification number information */
 171#define U8500_BB_UID_BASE      (U8500_BACKUPRAM1_BASE + 0xFC0)
 172
 173/* Offsets to specific addresses in some IP blocks for DMA */
 174#define MSP_TX_RX_REG_OFFSET    0
 175#define CRYP1_RX_REG_OFFSET     0x10
 176#define CRYP1_TX_REG_OFFSET     0x8
 177#define HASH1_TX_REG_OFFSET     0x4
 178
 179/*
 180 * Macros to get at IO space when running virtually
 181 * We dont map all the peripherals, let ioremap do
 182 * this for us. We map only very basic peripherals here.
 183 */
 184#define U8500_IO_VIRTUAL        0xf0000000
 185#define U8500_IO_PHYSICAL       0xa0000000
 186/* This is where we map in the ROM to check ASIC IDs */
 187#define UX500_VIRT_ROM          0xf0000000
 188
 189/* This macro is used in assembly, so no cast */
 190#define IO_ADDRESS(x)           \
 191        (((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + U8500_IO_VIRTUAL)
 192
 193/* typesafe io address */
 194#define __io_address(n)         IOMEM(IO_ADDRESS(n))
 195
 196/* Used by some plat-nomadik code */
 197#define io_p2v(n)               __io_address(n)
 198
 199#define ARRAY_AND_SIZE(x)       (x), ARRAY_SIZE(x)
 200
 201#endif
 202