linux/drivers/media/dvb-frontends/af9013.c
<<
>>
Prefs
   1/*
   2 * Afatech AF9013 demodulator driver
   3 *
   4 * Copyright (C) 2007 Antti Palosaari <crope@iki.fi>
   5 * Copyright (C) 2011 Antti Palosaari <crope@iki.fi>
   6 *
   7 * Thanks to Afatech who kindly provided information.
   8 *
   9 *    This program is free software; you can redistribute it and/or modify
  10 *    it under the terms of the GNU General Public License as published by
  11 *    the Free Software Foundation; either version 2 of the License, or
  12 *    (at your option) any later version.
  13 *
  14 *    This program is distributed in the hope that it will be useful,
  15 *    but WITHOUT ANY WARRANTY; without even the implied warranty of
  16 *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  17 *    GNU General Public License for more details.
  18 *
  19 *    You should have received a copy of the GNU General Public License
  20 *    along with this program; if not, write to the Free Software
  21 *    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  22 *
  23 */
  24
  25#include "af9013_priv.h"
  26
  27/* Max transfer size done by I2C transfer functions */
  28#define MAX_XFER_SIZE  64
  29
  30struct af9013_state {
  31        struct i2c_adapter *i2c;
  32        struct dvb_frontend fe;
  33        struct af9013_config config;
  34
  35        /* tuner/demod RF and IF AGC limits used for signal strength calc */
  36        u8 signal_strength_en, rf_50, rf_80, if_50, if_80;
  37        u16 signal_strength;
  38        u32 ber;
  39        u32 ucblocks;
  40        u16 snr;
  41        u32 bandwidth_hz;
  42        fe_status_t fe_status;
  43        unsigned long set_frontend_jiffies;
  44        unsigned long read_status_jiffies;
  45        bool first_tune;
  46        bool i2c_gate_state;
  47        unsigned int statistics_step:3;
  48        struct delayed_work statistics_work;
  49};
  50
  51/* write multiple registers */
  52static int af9013_wr_regs_i2c(struct af9013_state *priv, u8 mbox, u16 reg,
  53        const u8 *val, int len)
  54{
  55        int ret;
  56        u8 buf[MAX_XFER_SIZE];
  57        struct i2c_msg msg[1] = {
  58                {
  59                        .addr = priv->config.i2c_addr,
  60                        .flags = 0,
  61                        .len = 3 + len,
  62                        .buf = buf,
  63                }
  64        };
  65
  66        if (3 + len > sizeof(buf)) {
  67                dev_warn(&priv->i2c->dev,
  68                         "%s: i2c wr reg=%04x: len=%d is too big!\n",
  69                         KBUILD_MODNAME, reg, len);
  70                return -EINVAL;
  71        }
  72
  73        buf[0] = (reg >> 8) & 0xff;
  74        buf[1] = (reg >> 0) & 0xff;
  75        buf[2] = mbox;
  76        memcpy(&buf[3], val, len);
  77
  78        ret = i2c_transfer(priv->i2c, msg, 1);
  79        if (ret == 1) {
  80                ret = 0;
  81        } else {
  82                dev_warn(&priv->i2c->dev, "%s: i2c wr failed=%d reg=%04x " \
  83                                "len=%d\n", KBUILD_MODNAME, ret, reg, len);
  84                ret = -EREMOTEIO;
  85        }
  86        return ret;
  87}
  88
  89/* read multiple registers */
  90static int af9013_rd_regs_i2c(struct af9013_state *priv, u8 mbox, u16 reg,
  91        u8 *val, int len)
  92{
  93        int ret;
  94        u8 buf[3];
  95        struct i2c_msg msg[2] = {
  96                {
  97                        .addr = priv->config.i2c_addr,
  98                        .flags = 0,
  99                        .len = 3,
 100                        .buf = buf,
 101                }, {
 102                        .addr = priv->config.i2c_addr,
 103                        .flags = I2C_M_RD,
 104                        .len = len,
 105                        .buf = val,
 106                }
 107        };
 108
 109        buf[0] = (reg >> 8) & 0xff;
 110        buf[1] = (reg >> 0) & 0xff;
 111        buf[2] = mbox;
 112
 113        ret = i2c_transfer(priv->i2c, msg, 2);
 114        if (ret == 2) {
 115                ret = 0;
 116        } else {
 117                dev_warn(&priv->i2c->dev, "%s: i2c rd failed=%d reg=%04x " \
 118                                "len=%d\n", KBUILD_MODNAME, ret, reg, len);
 119                ret = -EREMOTEIO;
 120        }
 121        return ret;
 122}
 123
 124/* write multiple registers */
 125static int af9013_wr_regs(struct af9013_state *priv, u16 reg, const u8 *val,
 126        int len)
 127{
 128        int ret, i;
 129        u8 mbox = (0 << 7)|(0 << 6)|(1 << 1)|(1 << 0);
 130
 131        if ((priv->config.ts_mode == AF9013_TS_USB) &&
 132                ((reg & 0xff00) != 0xff00) && ((reg & 0xff00) != 0xae00)) {
 133                mbox |= ((len - 1) << 2);
 134                ret = af9013_wr_regs_i2c(priv, mbox, reg, val, len);
 135        } else {
 136                for (i = 0; i < len; i++) {
 137                        ret = af9013_wr_regs_i2c(priv, mbox, reg+i, val+i, 1);
 138                        if (ret)
 139                                goto err;
 140                }
 141        }
 142
 143err:
 144        return 0;
 145}
 146
 147/* read multiple registers */
 148static int af9013_rd_regs(struct af9013_state *priv, u16 reg, u8 *val, int len)
 149{
 150        int ret, i;
 151        u8 mbox = (0 << 7)|(0 << 6)|(1 << 1)|(0 << 0);
 152
 153        if ((priv->config.ts_mode == AF9013_TS_USB) &&
 154                ((reg & 0xff00) != 0xff00) && ((reg & 0xff00) != 0xae00)) {
 155                mbox |= ((len - 1) << 2);
 156                ret = af9013_rd_regs_i2c(priv, mbox, reg, val, len);
 157        } else {
 158                for (i = 0; i < len; i++) {
 159                        ret = af9013_rd_regs_i2c(priv, mbox, reg+i, val+i, 1);
 160                        if (ret)
 161                                goto err;
 162                }
 163        }
 164
 165err:
 166        return 0;
 167}
 168
 169/* write single register */
 170static int af9013_wr_reg(struct af9013_state *priv, u16 reg, u8 val)
 171{
 172        return af9013_wr_regs(priv, reg, &val, 1);
 173}
 174
 175/* read single register */
 176static int af9013_rd_reg(struct af9013_state *priv, u16 reg, u8 *val)
 177{
 178        return af9013_rd_regs(priv, reg, val, 1);
 179}
 180
 181static int af9013_write_ofsm_regs(struct af9013_state *state, u16 reg, u8 *val,
 182        u8 len)
 183{
 184        u8 mbox = (1 << 7)|(1 << 6)|((len - 1) << 2)|(1 << 1)|(1 << 0);
 185        return af9013_wr_regs_i2c(state, mbox, reg, val, len);
 186}
 187
 188static int af9013_wr_reg_bits(struct af9013_state *state, u16 reg, int pos,
 189        int len, u8 val)
 190{
 191        int ret;
 192        u8 tmp, mask;
 193
 194        /* no need for read if whole reg is written */
 195        if (len != 8) {
 196                ret = af9013_rd_reg(state, reg, &tmp);
 197                if (ret)
 198                        return ret;
 199
 200                mask = (0xff >> (8 - len)) << pos;
 201                val <<= pos;
 202                tmp &= ~mask;
 203                val |= tmp;
 204        }
 205
 206        return af9013_wr_reg(state, reg, val);
 207}
 208
 209static int af9013_rd_reg_bits(struct af9013_state *state, u16 reg, int pos,
 210        int len, u8 *val)
 211{
 212        int ret;
 213        u8 tmp;
 214
 215        ret = af9013_rd_reg(state, reg, &tmp);
 216        if (ret)
 217                return ret;
 218
 219        *val = (tmp >> pos);
 220        *val &= (0xff >> (8 - len));
 221
 222        return 0;
 223}
 224
 225static int af9013_set_gpio(struct af9013_state *state, u8 gpio, u8 gpioval)
 226{
 227        int ret;
 228        u8 pos;
 229        u16 addr;
 230
 231        dev_dbg(&state->i2c->dev, "%s: gpio=%d gpioval=%02x\n",
 232                        __func__, gpio, gpioval);
 233
 234        /*
 235         * GPIO0 & GPIO1 0xd735
 236         * GPIO2 & GPIO3 0xd736
 237         */
 238
 239        switch (gpio) {
 240        case 0:
 241        case 1:
 242                addr = 0xd735;
 243                break;
 244        case 2:
 245        case 3:
 246                addr = 0xd736;
 247                break;
 248
 249        default:
 250                dev_err(&state->i2c->dev, "%s: invalid gpio=%d\n",
 251                                KBUILD_MODNAME, gpio);
 252                ret = -EINVAL;
 253                goto err;
 254        }
 255
 256        switch (gpio) {
 257        case 0:
 258        case 2:
 259                pos = 0;
 260                break;
 261        case 1:
 262        case 3:
 263        default:
 264                pos = 4;
 265                break;
 266        }
 267
 268        ret = af9013_wr_reg_bits(state, addr, pos, 4, gpioval);
 269        if (ret)
 270                goto err;
 271
 272        return ret;
 273err:
 274        dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret);
 275        return ret;
 276}
 277
 278static u32 af9013_div(struct af9013_state *state, u32 a, u32 b, u32 x)
 279{
 280        u32 r = 0, c = 0, i;
 281
 282        dev_dbg(&state->i2c->dev, "%s: a=%d b=%d x=%d\n", __func__, a, b, x);
 283
 284        if (a > b) {
 285                c = a / b;
 286                a = a - c * b;
 287        }
 288
 289        for (i = 0; i < x; i++) {
 290                if (a >= b) {
 291                        r += 1;
 292                        a -= b;
 293                }
 294                a <<= 1;
 295                r <<= 1;
 296        }
 297        r = (c << (u32)x) + r;
 298
 299        dev_dbg(&state->i2c->dev, "%s: a=%d b=%d x=%d r=%d r=%x\n",
 300                        __func__, a, b, x, r, r);
 301
 302        return r;
 303}
 304
 305static int af9013_power_ctrl(struct af9013_state *state, u8 onoff)
 306{
 307        int ret, i;
 308        u8 tmp;
 309
 310        dev_dbg(&state->i2c->dev, "%s: onoff=%d\n", __func__, onoff);
 311
 312        /* enable reset */
 313        ret = af9013_wr_reg_bits(state, 0xd417, 4, 1, 1);
 314        if (ret)
 315                goto err;
 316
 317        /* start reset mechanism */
 318        ret = af9013_wr_reg(state, 0xaeff, 1);
 319        if (ret)
 320                goto err;
 321
 322        /* wait reset performs */
 323        for (i = 0; i < 150; i++) {
 324                ret = af9013_rd_reg_bits(state, 0xd417, 1, 1, &tmp);
 325                if (ret)
 326                        goto err;
 327
 328                if (tmp)
 329                        break; /* reset done */
 330
 331                usleep_range(5000, 25000);
 332        }
 333
 334        if (!tmp)
 335                return -ETIMEDOUT;
 336
 337        if (onoff) {
 338                /* clear reset */
 339                ret = af9013_wr_reg_bits(state, 0xd417, 1, 1, 0);
 340                if (ret)
 341                        goto err;
 342
 343                /* disable reset */
 344                ret = af9013_wr_reg_bits(state, 0xd417, 4, 1, 0);
 345
 346                /* power on */
 347                ret = af9013_wr_reg_bits(state, 0xd73a, 3, 1, 0);
 348        } else {
 349                /* power off */
 350                ret = af9013_wr_reg_bits(state, 0xd73a, 3, 1, 1);
 351        }
 352
 353        return ret;
 354err:
 355        dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret);
 356        return ret;
 357}
 358
 359static int af9013_statistics_ber_unc_start(struct dvb_frontend *fe)
 360{
 361        struct af9013_state *state = fe->demodulator_priv;
 362        int ret;
 363
 364        dev_dbg(&state->i2c->dev, "%s:\n", __func__);
 365
 366        /* reset and start BER counter */
 367        ret = af9013_wr_reg_bits(state, 0xd391, 4, 1, 1);
 368        if (ret)
 369                goto err;
 370
 371        return ret;
 372err:
 373        dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret);
 374        return ret;
 375}
 376
 377static int af9013_statistics_ber_unc_result(struct dvb_frontend *fe)
 378{
 379        struct af9013_state *state = fe->demodulator_priv;
 380        int ret;
 381        u8 buf[5];
 382
 383        dev_dbg(&state->i2c->dev, "%s:\n", __func__);
 384
 385        /* check if error bit count is ready */
 386        ret = af9013_rd_reg_bits(state, 0xd391, 4, 1, &buf[0]);
 387        if (ret)
 388                goto err;
 389
 390        if (!buf[0]) {
 391                dev_dbg(&state->i2c->dev, "%s: not ready\n", __func__);
 392                return 0;
 393        }
 394
 395        ret = af9013_rd_regs(state, 0xd387, buf, 5);
 396        if (ret)
 397                goto err;
 398
 399        state->ber = (buf[2] << 16) | (buf[1] << 8) | buf[0];
 400        state->ucblocks += (buf[4] << 8) | buf[3];
 401
 402        return ret;
 403err:
 404        dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret);
 405        return ret;
 406}
 407
 408static int af9013_statistics_snr_start(struct dvb_frontend *fe)
 409{
 410        struct af9013_state *state = fe->demodulator_priv;
 411        int ret;
 412
 413        dev_dbg(&state->i2c->dev, "%s:\n", __func__);
 414
 415        /* start SNR meas */
 416        ret = af9013_wr_reg_bits(state, 0xd2e1, 3, 1, 1);
 417        if (ret)
 418                goto err;
 419
 420        return ret;
 421err:
 422        dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret);
 423        return ret;
 424}
 425
 426static int af9013_statistics_snr_result(struct dvb_frontend *fe)
 427{
 428        struct af9013_state *state = fe->demodulator_priv;
 429        int ret, i, len;
 430        u8 buf[3], tmp;
 431        u32 snr_val;
 432        const struct af9013_snr *uninitialized_var(snr_lut);
 433
 434        dev_dbg(&state->i2c->dev, "%s:\n", __func__);
 435
 436        /* check if SNR ready */
 437        ret = af9013_rd_reg_bits(state, 0xd2e1, 3, 1, &tmp);
 438        if (ret)
 439                goto err;
 440
 441        if (!tmp) {
 442                dev_dbg(&state->i2c->dev, "%s: not ready\n", __func__);
 443                return 0;
 444        }
 445
 446        /* read value */
 447        ret = af9013_rd_regs(state, 0xd2e3, buf, 3);
 448        if (ret)
 449                goto err;
 450
 451        snr_val = (buf[2] << 16) | (buf[1] << 8) | buf[0];
 452
 453        /* read current modulation */
 454        ret = af9013_rd_reg(state, 0xd3c1, &tmp);
 455        if (ret)
 456                goto err;
 457
 458        switch ((tmp >> 6) & 3) {
 459        case 0:
 460                len = ARRAY_SIZE(qpsk_snr_lut);
 461                snr_lut = qpsk_snr_lut;
 462                break;
 463        case 1:
 464                len = ARRAY_SIZE(qam16_snr_lut);
 465                snr_lut = qam16_snr_lut;
 466                break;
 467        case 2:
 468                len = ARRAY_SIZE(qam64_snr_lut);
 469                snr_lut = qam64_snr_lut;
 470                break;
 471        default:
 472                goto err;
 473                break;
 474        }
 475
 476        for (i = 0; i < len; i++) {
 477                tmp = snr_lut[i].snr;
 478
 479                if (snr_val < snr_lut[i].val)
 480                        break;
 481        }
 482        state->snr = tmp * 10; /* dB/10 */
 483
 484        return ret;
 485err:
 486        dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret);
 487        return ret;
 488}
 489
 490static int af9013_statistics_signal_strength(struct dvb_frontend *fe)
 491{
 492        struct af9013_state *state = fe->demodulator_priv;
 493        int ret = 0;
 494        u8 buf[2], rf_gain, if_gain;
 495        int signal_strength;
 496
 497        dev_dbg(&state->i2c->dev, "%s:\n", __func__);
 498
 499        if (!state->signal_strength_en)
 500                return 0;
 501
 502        ret = af9013_rd_regs(state, 0xd07c, buf, 2);
 503        if (ret)
 504                goto err;
 505
 506        rf_gain = buf[0];
 507        if_gain = buf[1];
 508
 509        signal_strength = (0xffff / \
 510                (9 * (state->rf_50 + state->if_50) - \
 511                11 * (state->rf_80 + state->if_80))) * \
 512                (10 * (rf_gain + if_gain) - \
 513                11 * (state->rf_80 + state->if_80));
 514        if (signal_strength < 0)
 515                signal_strength = 0;
 516        else if (signal_strength > 0xffff)
 517                signal_strength = 0xffff;
 518
 519        state->signal_strength = signal_strength;
 520
 521        return ret;
 522err:
 523        dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret);
 524        return ret;
 525}
 526
 527static void af9013_statistics_work(struct work_struct *work)
 528{
 529        struct af9013_state *state = container_of(work,
 530                struct af9013_state, statistics_work.work);
 531        unsigned int next_msec;
 532
 533        /* update only signal strength when demod is not locked */
 534        if (!(state->fe_status & FE_HAS_LOCK)) {
 535                state->statistics_step = 0;
 536                state->ber = 0;
 537                state->snr = 0;
 538        }
 539
 540        switch (state->statistics_step) {
 541        default:
 542                state->statistics_step = 0;
 543        case 0:
 544                af9013_statistics_signal_strength(&state->fe);
 545                state->statistics_step++;
 546                next_msec = 300;
 547                break;
 548        case 1:
 549                af9013_statistics_snr_start(&state->fe);
 550                state->statistics_step++;
 551                next_msec = 200;
 552                break;
 553        case 2:
 554                af9013_statistics_ber_unc_start(&state->fe);
 555                state->statistics_step++;
 556                next_msec = 1000;
 557                break;
 558        case 3:
 559                af9013_statistics_snr_result(&state->fe);
 560                state->statistics_step++;
 561                next_msec = 400;
 562                break;
 563        case 4:
 564                af9013_statistics_ber_unc_result(&state->fe);
 565                state->statistics_step++;
 566                next_msec = 100;
 567                break;
 568        }
 569
 570        schedule_delayed_work(&state->statistics_work,
 571                msecs_to_jiffies(next_msec));
 572}
 573
 574static int af9013_get_tune_settings(struct dvb_frontend *fe,
 575        struct dvb_frontend_tune_settings *fesettings)
 576{
 577        fesettings->min_delay_ms = 800;
 578        fesettings->step_size = 0;
 579        fesettings->max_drift = 0;
 580
 581        return 0;
 582}
 583
 584static int af9013_set_frontend(struct dvb_frontend *fe)
 585{
 586        struct af9013_state *state = fe->demodulator_priv;
 587        struct dtv_frontend_properties *c = &fe->dtv_property_cache;
 588        int ret, i, sampling_freq;
 589        bool auto_mode, spec_inv;
 590        u8 buf[6];
 591        u32 if_frequency, freq_cw;
 592
 593        dev_dbg(&state->i2c->dev, "%s: frequency=%d bandwidth_hz=%d\n",
 594                        __func__, c->frequency, c->bandwidth_hz);
 595
 596        /* program tuner */
 597        if (fe->ops.tuner_ops.set_params)
 598                fe->ops.tuner_ops.set_params(fe);
 599
 600        /* program CFOE coefficients */
 601        if (c->bandwidth_hz != state->bandwidth_hz) {
 602                for (i = 0; i < ARRAY_SIZE(coeff_lut); i++) {
 603                        if (coeff_lut[i].clock == state->config.clock &&
 604                                coeff_lut[i].bandwidth_hz == c->bandwidth_hz) {
 605                                break;
 606                        }
 607                }
 608
 609                ret = af9013_wr_regs(state, 0xae00, coeff_lut[i].val,
 610                        sizeof(coeff_lut[i].val));
 611        }
 612
 613        /* program frequency control */
 614        if (c->bandwidth_hz != state->bandwidth_hz || state->first_tune) {
 615                /* get used IF frequency */
 616                if (fe->ops.tuner_ops.get_if_frequency)
 617                        fe->ops.tuner_ops.get_if_frequency(fe, &if_frequency);
 618                else
 619                        if_frequency = state->config.if_frequency;
 620
 621                dev_dbg(&state->i2c->dev, "%s: if_frequency=%d\n",
 622                                __func__, if_frequency);
 623
 624                sampling_freq = if_frequency;
 625
 626                while (sampling_freq > (state->config.clock / 2))
 627                        sampling_freq -= state->config.clock;
 628
 629                if (sampling_freq < 0) {
 630                        sampling_freq *= -1;
 631                        spec_inv = state->config.spec_inv;
 632                } else {
 633                        spec_inv = !state->config.spec_inv;
 634                }
 635
 636                freq_cw = af9013_div(state, sampling_freq, state->config.clock,
 637                                23);
 638
 639                if (spec_inv)
 640                        freq_cw = 0x800000 - freq_cw;
 641
 642                buf[0] = (freq_cw >>  0) & 0xff;
 643                buf[1] = (freq_cw >>  8) & 0xff;
 644                buf[2] = (freq_cw >> 16) & 0x7f;
 645
 646                freq_cw = 0x800000 - freq_cw;
 647
 648                buf[3] = (freq_cw >>  0) & 0xff;
 649                buf[4] = (freq_cw >>  8) & 0xff;
 650                buf[5] = (freq_cw >> 16) & 0x7f;
 651
 652                ret = af9013_wr_regs(state, 0xd140, buf, 3);
 653                if (ret)
 654                        goto err;
 655
 656                ret = af9013_wr_regs(state, 0x9be7, buf, 6);
 657                if (ret)
 658                        goto err;
 659        }
 660
 661        /* clear TPS lock flag */
 662        ret = af9013_wr_reg_bits(state, 0xd330, 3, 1, 1);
 663        if (ret)
 664                goto err;
 665
 666        /* clear MPEG2 lock flag */
 667        ret = af9013_wr_reg_bits(state, 0xd507, 6, 1, 0);
 668        if (ret)
 669                goto err;
 670
 671        /* empty channel function */
 672        ret = af9013_wr_reg_bits(state, 0x9bfe, 0, 1, 0);
 673        if (ret)
 674                goto err;
 675
 676        /* empty DVB-T channel function */
 677        ret = af9013_wr_reg_bits(state, 0x9bc2, 0, 1, 0);
 678        if (ret)
 679                goto err;
 680
 681        /* transmission parameters */
 682        auto_mode = false;
 683        memset(buf, 0, 3);
 684
 685        switch (c->transmission_mode) {
 686        case TRANSMISSION_MODE_AUTO:
 687                auto_mode = 1;
 688                break;
 689        case TRANSMISSION_MODE_2K:
 690                break;
 691        case TRANSMISSION_MODE_8K:
 692                buf[0] |= (1 << 0);
 693                break;
 694        default:
 695                dev_dbg(&state->i2c->dev, "%s: invalid transmission_mode\n",
 696                                __func__);
 697                auto_mode = 1;
 698        }
 699
 700        switch (c->guard_interval) {
 701        case GUARD_INTERVAL_AUTO:
 702                auto_mode = 1;
 703                break;
 704        case GUARD_INTERVAL_1_32:
 705                break;
 706        case GUARD_INTERVAL_1_16:
 707                buf[0] |= (1 << 2);
 708                break;
 709        case GUARD_INTERVAL_1_8:
 710                buf[0] |= (2 << 2);
 711                break;
 712        case GUARD_INTERVAL_1_4:
 713                buf[0] |= (3 << 2);
 714                break;
 715        default:
 716                dev_dbg(&state->i2c->dev, "%s: invalid guard_interval\n",
 717                                __func__);
 718                auto_mode = 1;
 719        }
 720
 721        switch (c->hierarchy) {
 722        case HIERARCHY_AUTO:
 723                auto_mode = 1;
 724                break;
 725        case HIERARCHY_NONE:
 726                break;
 727        case HIERARCHY_1:
 728                buf[0] |= (1 << 4);
 729                break;
 730        case HIERARCHY_2:
 731                buf[0] |= (2 << 4);
 732                break;
 733        case HIERARCHY_4:
 734                buf[0] |= (3 << 4);
 735                break;
 736        default:
 737                dev_dbg(&state->i2c->dev, "%s: invalid hierarchy\n", __func__);
 738                auto_mode = 1;
 739        }
 740
 741        switch (c->modulation) {
 742        case QAM_AUTO:
 743                auto_mode = 1;
 744                break;
 745        case QPSK:
 746                break;
 747        case QAM_16:
 748                buf[1] |= (1 << 6);
 749                break;
 750        case QAM_64:
 751                buf[1] |= (2 << 6);
 752                break;
 753        default:
 754                dev_dbg(&state->i2c->dev, "%s: invalid modulation\n", __func__);
 755                auto_mode = 1;
 756        }
 757
 758        /* Use HP. How and which case we can switch to LP? */
 759        buf[1] |= (1 << 4);
 760
 761        switch (c->code_rate_HP) {
 762        case FEC_AUTO:
 763                auto_mode = 1;
 764                break;
 765        case FEC_1_2:
 766                break;
 767        case FEC_2_3:
 768                buf[2] |= (1 << 0);
 769                break;
 770        case FEC_3_4:
 771                buf[2] |= (2 << 0);
 772                break;
 773        case FEC_5_6:
 774                buf[2] |= (3 << 0);
 775                break;
 776        case FEC_7_8:
 777                buf[2] |= (4 << 0);
 778                break;
 779        default:
 780                dev_dbg(&state->i2c->dev, "%s: invalid code_rate_HP\n",
 781                                __func__);
 782                auto_mode = 1;
 783        }
 784
 785        switch (c->code_rate_LP) {
 786        case FEC_AUTO:
 787                auto_mode = 1;
 788                break;
 789        case FEC_1_2:
 790                break;
 791        case FEC_2_3:
 792                buf[2] |= (1 << 3);
 793                break;
 794        case FEC_3_4:
 795                buf[2] |= (2 << 3);
 796                break;
 797        case FEC_5_6:
 798                buf[2] |= (3 << 3);
 799                break;
 800        case FEC_7_8:
 801                buf[2] |= (4 << 3);
 802                break;
 803        case FEC_NONE:
 804                break;
 805        default:
 806                dev_dbg(&state->i2c->dev, "%s: invalid code_rate_LP\n",
 807                                __func__);
 808                auto_mode = 1;
 809        }
 810
 811        switch (c->bandwidth_hz) {
 812        case 6000000:
 813                break;
 814        case 7000000:
 815                buf[1] |= (1 << 2);
 816                break;
 817        case 8000000:
 818                buf[1] |= (2 << 2);
 819                break;
 820        default:
 821                dev_dbg(&state->i2c->dev, "%s: invalid bandwidth_hz\n",
 822                                __func__);
 823                ret = -EINVAL;
 824                goto err;
 825        }
 826
 827        ret = af9013_wr_regs(state, 0xd3c0, buf, 3);
 828        if (ret)
 829                goto err;
 830
 831        if (auto_mode) {
 832                /* clear easy mode flag */
 833                ret = af9013_wr_reg(state, 0xaefd, 0);
 834                if (ret)
 835                        goto err;
 836
 837                dev_dbg(&state->i2c->dev, "%s: auto params\n", __func__);
 838        } else {
 839                /* set easy mode flag */
 840                ret = af9013_wr_reg(state, 0xaefd, 1);
 841                if (ret)
 842                        goto err;
 843
 844                ret = af9013_wr_reg(state, 0xaefe, 0);
 845                if (ret)
 846                        goto err;
 847
 848                dev_dbg(&state->i2c->dev, "%s: manual params\n", __func__);
 849        }
 850
 851        /* tune */
 852        ret = af9013_wr_reg(state, 0xffff, 0);
 853        if (ret)
 854                goto err;
 855
 856        state->bandwidth_hz = c->bandwidth_hz;
 857        state->set_frontend_jiffies = jiffies;
 858        state->first_tune = false;
 859
 860        return ret;
 861err:
 862        dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret);
 863        return ret;
 864}
 865
 866static int af9013_get_frontend(struct dvb_frontend *fe)
 867{
 868        struct dtv_frontend_properties *c = &fe->dtv_property_cache;
 869        struct af9013_state *state = fe->demodulator_priv;
 870        int ret;
 871        u8 buf[3];
 872
 873        dev_dbg(&state->i2c->dev, "%s:\n", __func__);
 874
 875        ret = af9013_rd_regs(state, 0xd3c0, buf, 3);
 876        if (ret)
 877                goto err;
 878
 879        switch ((buf[1] >> 6) & 3) {
 880        case 0:
 881                c->modulation = QPSK;
 882                break;
 883        case 1:
 884                c->modulation = QAM_16;
 885                break;
 886        case 2:
 887                c->modulation = QAM_64;
 888                break;
 889        }
 890
 891        switch ((buf[0] >> 0) & 3) {
 892        case 0:
 893                c->transmission_mode = TRANSMISSION_MODE_2K;
 894                break;
 895        case 1:
 896                c->transmission_mode = TRANSMISSION_MODE_8K;
 897        }
 898
 899        switch ((buf[0] >> 2) & 3) {
 900        case 0:
 901                c->guard_interval = GUARD_INTERVAL_1_32;
 902                break;
 903        case 1:
 904                c->guard_interval = GUARD_INTERVAL_1_16;
 905                break;
 906        case 2:
 907                c->guard_interval = GUARD_INTERVAL_1_8;
 908                break;
 909        case 3:
 910                c->guard_interval = GUARD_INTERVAL_1_4;
 911                break;
 912        }
 913
 914        switch ((buf[0] >> 4) & 7) {
 915        case 0:
 916                c->hierarchy = HIERARCHY_NONE;
 917                break;
 918        case 1:
 919                c->hierarchy = HIERARCHY_1;
 920                break;
 921        case 2:
 922                c->hierarchy = HIERARCHY_2;
 923                break;
 924        case 3:
 925                c->hierarchy = HIERARCHY_4;
 926                break;
 927        }
 928
 929        switch ((buf[2] >> 0) & 7) {
 930        case 0:
 931                c->code_rate_HP = FEC_1_2;
 932                break;
 933        case 1:
 934                c->code_rate_HP = FEC_2_3;
 935                break;
 936        case 2:
 937                c->code_rate_HP = FEC_3_4;
 938                break;
 939        case 3:
 940                c->code_rate_HP = FEC_5_6;
 941                break;
 942        case 4:
 943                c->code_rate_HP = FEC_7_8;
 944                break;
 945        }
 946
 947        switch ((buf[2] >> 3) & 7) {
 948        case 0:
 949                c->code_rate_LP = FEC_1_2;
 950                break;
 951        case 1:
 952                c->code_rate_LP = FEC_2_3;
 953                break;
 954        case 2:
 955                c->code_rate_LP = FEC_3_4;
 956                break;
 957        case 3:
 958                c->code_rate_LP = FEC_5_6;
 959                break;
 960        case 4:
 961                c->code_rate_LP = FEC_7_8;
 962                break;
 963        }
 964
 965        switch ((buf[1] >> 2) & 3) {
 966        case 0:
 967                c->bandwidth_hz = 6000000;
 968                break;
 969        case 1:
 970                c->bandwidth_hz = 7000000;
 971                break;
 972        case 2:
 973                c->bandwidth_hz = 8000000;
 974                break;
 975        }
 976
 977        return ret;
 978err:
 979        dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret);
 980        return ret;
 981}
 982
 983static int af9013_read_status(struct dvb_frontend *fe, fe_status_t *status)
 984{
 985        struct af9013_state *state = fe->demodulator_priv;
 986        int ret;
 987        u8 tmp;
 988
 989        /*
 990         * Return status from the cache if it is younger than 2000ms with the
 991         * exception of last tune is done during 4000ms.
 992         */
 993        if (time_is_after_jiffies(
 994                state->read_status_jiffies + msecs_to_jiffies(2000)) &&
 995                time_is_before_jiffies(
 996                state->set_frontend_jiffies + msecs_to_jiffies(4000))
 997        ) {
 998                        *status = state->fe_status;
 999                        return 0;
1000        } else {
1001                *status = 0;
1002        }
1003
1004        /* MPEG2 lock */
1005        ret = af9013_rd_reg_bits(state, 0xd507, 6, 1, &tmp);
1006        if (ret)
1007                goto err;
1008
1009        if (tmp)
1010                *status |= FE_HAS_SIGNAL | FE_HAS_CARRIER | FE_HAS_VITERBI |
1011                        FE_HAS_SYNC | FE_HAS_LOCK;
1012
1013        if (!*status) {
1014                /* TPS lock */
1015                ret = af9013_rd_reg_bits(state, 0xd330, 3, 1, &tmp);
1016                if (ret)
1017                        goto err;
1018
1019                if (tmp)
1020                        *status |= FE_HAS_SIGNAL | FE_HAS_CARRIER |
1021                                FE_HAS_VITERBI;
1022        }
1023
1024        state->fe_status = *status;
1025        state->read_status_jiffies = jiffies;
1026
1027        return ret;
1028err:
1029        dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret);
1030        return ret;
1031}
1032
1033static int af9013_read_snr(struct dvb_frontend *fe, u16 *snr)
1034{
1035        struct af9013_state *state = fe->demodulator_priv;
1036        *snr = state->snr;
1037        return 0;
1038}
1039
1040static int af9013_read_signal_strength(struct dvb_frontend *fe, u16 *strength)
1041{
1042        struct af9013_state *state = fe->demodulator_priv;
1043        *strength = state->signal_strength;
1044        return 0;
1045}
1046
1047static int af9013_read_ber(struct dvb_frontend *fe, u32 *ber)
1048{
1049        struct af9013_state *state = fe->demodulator_priv;
1050        *ber = state->ber;
1051        return 0;
1052}
1053
1054static int af9013_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
1055{
1056        struct af9013_state *state = fe->demodulator_priv;
1057        *ucblocks = state->ucblocks;
1058        return 0;
1059}
1060
1061static int af9013_init(struct dvb_frontend *fe)
1062{
1063        struct af9013_state *state = fe->demodulator_priv;
1064        int ret, i, len;
1065        u8 buf[3], tmp;
1066        u32 adc_cw;
1067        const struct af9013_reg_bit *init;
1068
1069        dev_dbg(&state->i2c->dev, "%s:\n", __func__);
1070
1071        /* power on */
1072        ret = af9013_power_ctrl(state, 1);
1073        if (ret)
1074                goto err;
1075
1076        /* enable ADC */
1077        ret = af9013_wr_reg(state, 0xd73a, 0xa4);
1078        if (ret)
1079                goto err;
1080
1081        /* write API version to firmware */
1082        ret = af9013_wr_regs(state, 0x9bf2, state->config.api_version, 4);
1083        if (ret)
1084                goto err;
1085
1086        /* program ADC control */
1087        switch (state->config.clock) {
1088        case 28800000: /* 28.800 MHz */
1089                tmp = 0;
1090                break;
1091        case 20480000: /* 20.480 MHz */
1092                tmp = 1;
1093                break;
1094        case 28000000: /* 28.000 MHz */
1095                tmp = 2;
1096                break;
1097        case 25000000: /* 25.000 MHz */
1098                tmp = 3;
1099                break;
1100        default:
1101                dev_err(&state->i2c->dev, "%s: invalid clock\n",
1102                                KBUILD_MODNAME);
1103                return -EINVAL;
1104        }
1105
1106        adc_cw = af9013_div(state, state->config.clock, 1000000ul, 19);
1107        buf[0] = (adc_cw >>  0) & 0xff;
1108        buf[1] = (adc_cw >>  8) & 0xff;
1109        buf[2] = (adc_cw >> 16) & 0xff;
1110
1111        ret = af9013_wr_regs(state, 0xd180, buf, 3);
1112        if (ret)
1113                goto err;
1114
1115        ret = af9013_wr_reg_bits(state, 0x9bd2, 0, 4, tmp);
1116        if (ret)
1117                goto err;
1118
1119        /* set I2C master clock */
1120        ret = af9013_wr_reg(state, 0xd416, 0x14);
1121        if (ret)
1122                goto err;
1123
1124        /* set 16 embx */
1125        ret = af9013_wr_reg_bits(state, 0xd700, 1, 1, 1);
1126        if (ret)
1127                goto err;
1128
1129        /* set no trigger */
1130        ret = af9013_wr_reg_bits(state, 0xd700, 2, 1, 0);
1131        if (ret)
1132                goto err;
1133
1134        /* set read-update bit for constellation */
1135        ret = af9013_wr_reg_bits(state, 0xd371, 1, 1, 1);
1136        if (ret)
1137                goto err;
1138
1139        /* settings for mp2if */
1140        if (state->config.ts_mode == AF9013_TS_USB) {
1141                /* AF9015 split PSB to 1.5k + 0.5k */
1142                ret = af9013_wr_reg_bits(state, 0xd50b, 2, 1, 1);
1143                if (ret)
1144                        goto err;
1145        } else {
1146                /* AF9013 change the output bit to data7 */
1147                ret = af9013_wr_reg_bits(state, 0xd500, 3, 1, 1);
1148                if (ret)
1149                        goto err;
1150
1151                /* AF9013 set mpeg to full speed */
1152                ret = af9013_wr_reg_bits(state, 0xd502, 4, 1, 1);
1153                if (ret)
1154                        goto err;
1155        }
1156
1157        ret = af9013_wr_reg_bits(state, 0xd520, 4, 1, 1);
1158        if (ret)
1159                goto err;
1160
1161        /* load OFSM settings */
1162        dev_dbg(&state->i2c->dev, "%s: load ofsm settings\n", __func__);
1163        len = ARRAY_SIZE(ofsm_init);
1164        init = ofsm_init;
1165        for (i = 0; i < len; i++) {
1166                ret = af9013_wr_reg_bits(state, init[i].addr, init[i].pos,
1167                        init[i].len, init[i].val);
1168                if (ret)
1169                        goto err;
1170        }
1171
1172        /* load tuner specific settings */
1173        dev_dbg(&state->i2c->dev, "%s: load tuner specific settings\n",
1174                        __func__);
1175        switch (state->config.tuner) {
1176        case AF9013_TUNER_MXL5003D:
1177                len = ARRAY_SIZE(tuner_init_mxl5003d);
1178                init = tuner_init_mxl5003d;
1179                break;
1180        case AF9013_TUNER_MXL5005D:
1181        case AF9013_TUNER_MXL5005R:
1182        case AF9013_TUNER_MXL5007T:
1183                len = ARRAY_SIZE(tuner_init_mxl5005);
1184                init = tuner_init_mxl5005;
1185                break;
1186        case AF9013_TUNER_ENV77H11D5:
1187                len = ARRAY_SIZE(tuner_init_env77h11d5);
1188                init = tuner_init_env77h11d5;
1189                break;
1190        case AF9013_TUNER_MT2060:
1191                len = ARRAY_SIZE(tuner_init_mt2060);
1192                init = tuner_init_mt2060;
1193                break;
1194        case AF9013_TUNER_MC44S803:
1195                len = ARRAY_SIZE(tuner_init_mc44s803);
1196                init = tuner_init_mc44s803;
1197                break;
1198        case AF9013_TUNER_QT1010:
1199        case AF9013_TUNER_QT1010A:
1200                len = ARRAY_SIZE(tuner_init_qt1010);
1201                init = tuner_init_qt1010;
1202                break;
1203        case AF9013_TUNER_MT2060_2:
1204                len = ARRAY_SIZE(tuner_init_mt2060_2);
1205                init = tuner_init_mt2060_2;
1206                break;
1207        case AF9013_TUNER_TDA18271:
1208        case AF9013_TUNER_TDA18218:
1209                len = ARRAY_SIZE(tuner_init_tda18271);
1210                init = tuner_init_tda18271;
1211                break;
1212        case AF9013_TUNER_UNKNOWN:
1213        default:
1214                len = ARRAY_SIZE(tuner_init_unknown);
1215                init = tuner_init_unknown;
1216                break;
1217        }
1218
1219        for (i = 0; i < len; i++) {
1220                ret = af9013_wr_reg_bits(state, init[i].addr, init[i].pos,
1221                        init[i].len, init[i].val);
1222                if (ret)
1223                        goto err;
1224        }
1225
1226        /* TS mode */
1227        ret = af9013_wr_reg_bits(state, 0xd500, 1, 2, state->config.ts_mode);
1228        if (ret)
1229                goto err;
1230
1231        /* enable lock led */
1232        ret = af9013_wr_reg_bits(state, 0xd730, 0, 1, 1);
1233        if (ret)
1234                goto err;
1235
1236        /* check if we support signal strength */
1237        if (!state->signal_strength_en) {
1238                ret = af9013_rd_reg_bits(state, 0x9bee, 0, 1,
1239                        &state->signal_strength_en);
1240                if (ret)
1241                        goto err;
1242        }
1243
1244        /* read values needed for signal strength calculation */
1245        if (state->signal_strength_en && !state->rf_50) {
1246                ret = af9013_rd_reg(state, 0x9bbd, &state->rf_50);
1247                if (ret)
1248                        goto err;
1249
1250                ret = af9013_rd_reg(state, 0x9bd0, &state->rf_80);
1251                if (ret)
1252                        goto err;
1253
1254                ret = af9013_rd_reg(state, 0x9be2, &state->if_50);
1255                if (ret)
1256                        goto err;
1257
1258                ret = af9013_rd_reg(state, 0x9be4, &state->if_80);
1259                if (ret)
1260                        goto err;
1261        }
1262
1263        /* SNR */
1264        ret = af9013_wr_reg(state, 0xd2e2, 1);
1265        if (ret)
1266                goto err;
1267
1268        /* BER / UCB */
1269        buf[0] = (10000 >> 0) & 0xff;
1270        buf[1] = (10000 >> 8) & 0xff;
1271        ret = af9013_wr_regs(state, 0xd385, buf, 2);
1272        if (ret)
1273                goto err;
1274
1275        /* enable FEC monitor */
1276        ret = af9013_wr_reg_bits(state, 0xd392, 1, 1, 1);
1277        if (ret)
1278                goto err;
1279
1280        state->first_tune = true;
1281        schedule_delayed_work(&state->statistics_work, msecs_to_jiffies(400));
1282
1283        return ret;
1284err:
1285        dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret);
1286        return ret;
1287}
1288
1289static int af9013_sleep(struct dvb_frontend *fe)
1290{
1291        struct af9013_state *state = fe->demodulator_priv;
1292        int ret;
1293
1294        dev_dbg(&state->i2c->dev, "%s:\n", __func__);
1295
1296        /* stop statistics polling */
1297        cancel_delayed_work_sync(&state->statistics_work);
1298
1299        /* disable lock led */
1300        ret = af9013_wr_reg_bits(state, 0xd730, 0, 1, 0);
1301        if (ret)
1302                goto err;
1303
1304        /* power off */
1305        ret = af9013_power_ctrl(state, 0);
1306        if (ret)
1307                goto err;
1308
1309        return ret;
1310err:
1311        dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret);
1312        return ret;
1313}
1314
1315static int af9013_i2c_gate_ctrl(struct dvb_frontend *fe, int enable)
1316{
1317        int ret;
1318        struct af9013_state *state = fe->demodulator_priv;
1319
1320        dev_dbg(&state->i2c->dev, "%s: enable=%d\n", __func__, enable);
1321
1322        /* gate already open or close */
1323        if (state->i2c_gate_state == enable)
1324                return 0;
1325
1326        if (state->config.ts_mode == AF9013_TS_USB)
1327                ret = af9013_wr_reg_bits(state, 0xd417, 3, 1, enable);
1328        else
1329                ret = af9013_wr_reg_bits(state, 0xd607, 2, 1, enable);
1330        if (ret)
1331                goto err;
1332
1333        state->i2c_gate_state = enable;
1334
1335        return ret;
1336err:
1337        dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret);
1338        return ret;
1339}
1340
1341static void af9013_release(struct dvb_frontend *fe)
1342{
1343        struct af9013_state *state = fe->demodulator_priv;
1344        kfree(state);
1345}
1346
1347static struct dvb_frontend_ops af9013_ops;
1348
1349static int af9013_download_firmware(struct af9013_state *state)
1350{
1351        int i, len, remaining, ret;
1352        const struct firmware *fw;
1353        u16 checksum = 0;
1354        u8 val;
1355        u8 fw_params[4];
1356        u8 *fw_file = AF9013_FIRMWARE;
1357
1358        msleep(100);
1359        /* check whether firmware is already running */
1360        ret = af9013_rd_reg(state, 0x98be, &val);
1361        if (ret)
1362                goto err;
1363        else
1364                dev_dbg(&state->i2c->dev, "%s: firmware status=%02x\n",
1365                                __func__, val);
1366
1367        if (val == 0x0c) /* fw is running, no need for download */
1368                goto exit;
1369
1370        dev_info(&state->i2c->dev, "%s: found a '%s' in cold state, will try " \
1371                        "to load a firmware\n",
1372                        KBUILD_MODNAME, af9013_ops.info.name);
1373
1374        /* request the firmware, this will block and timeout */
1375        ret = request_firmware(&fw, fw_file, state->i2c->dev.parent);
1376        if (ret) {
1377                dev_info(&state->i2c->dev, "%s: did not find the firmware " \
1378                        "file. (%s) Please see linux/Documentation/dvb/ for " \
1379                        "more details on firmware-problems. (%d)\n",
1380                        KBUILD_MODNAME, fw_file, ret);
1381                goto err;
1382        }
1383
1384        dev_info(&state->i2c->dev, "%s: downloading firmware from file '%s'\n",
1385                        KBUILD_MODNAME, fw_file);
1386
1387        /* calc checksum */
1388        for (i = 0; i < fw->size; i++)
1389                checksum += fw->data[i];
1390
1391        fw_params[0] = checksum >> 8;
1392        fw_params[1] = checksum & 0xff;
1393        fw_params[2] = fw->size >> 8;
1394        fw_params[3] = fw->size & 0xff;
1395
1396        /* write fw checksum & size */
1397        ret = af9013_write_ofsm_regs(state, 0x50fc,
1398                fw_params, sizeof(fw_params));
1399        if (ret)
1400                goto err_release;
1401
1402        #define FW_ADDR 0x5100 /* firmware start address */
1403        #define LEN_MAX 16 /* max packet size */
1404        for (remaining = fw->size; remaining > 0; remaining -= LEN_MAX) {
1405                len = remaining;
1406                if (len > LEN_MAX)
1407                        len = LEN_MAX;
1408
1409                ret = af9013_write_ofsm_regs(state,
1410                        FW_ADDR + fw->size - remaining,
1411                        (u8 *) &fw->data[fw->size - remaining], len);
1412                if (ret) {
1413                        dev_err(&state->i2c->dev,
1414                                        "%s: firmware download failed=%d\n",
1415                                        KBUILD_MODNAME, ret);
1416                        goto err_release;
1417                }
1418        }
1419
1420        /* request boot firmware */
1421        ret = af9013_wr_reg(state, 0xe205, 1);
1422        if (ret)
1423                goto err_release;
1424
1425        for (i = 0; i < 15; i++) {
1426                msleep(100);
1427
1428                /* check firmware status */
1429                ret = af9013_rd_reg(state, 0x98be, &val);
1430                if (ret)
1431                        goto err_release;
1432
1433                dev_dbg(&state->i2c->dev, "%s: firmware status=%02x\n",
1434                                __func__, val);
1435
1436                if (val == 0x0c || val == 0x04) /* success or fail */
1437                        break;
1438        }
1439
1440        if (val == 0x04) {
1441                dev_err(&state->i2c->dev, "%s: firmware did not run\n",
1442                                KBUILD_MODNAME);
1443                ret = -ENODEV;
1444        } else if (val != 0x0c) {
1445                dev_err(&state->i2c->dev, "%s: firmware boot timeout\n",
1446                                KBUILD_MODNAME);
1447                ret = -ENODEV;
1448        }
1449
1450err_release:
1451        release_firmware(fw);
1452err:
1453exit:
1454        if (!ret)
1455                dev_info(&state->i2c->dev, "%s: found a '%s' in warm state\n",
1456                                KBUILD_MODNAME, af9013_ops.info.name);
1457        return ret;
1458}
1459
1460struct dvb_frontend *af9013_attach(const struct af9013_config *config,
1461        struct i2c_adapter *i2c)
1462{
1463        int ret;
1464        struct af9013_state *state = NULL;
1465        u8 buf[4], i;
1466
1467        /* allocate memory for the internal state */
1468        state = kzalloc(sizeof(struct af9013_state), GFP_KERNEL);
1469        if (state == NULL)
1470                goto err;
1471
1472        /* setup the state */
1473        state->i2c = i2c;
1474        memcpy(&state->config, config, sizeof(struct af9013_config));
1475
1476        /* download firmware */
1477        if (state->config.ts_mode != AF9013_TS_USB) {
1478                ret = af9013_download_firmware(state);
1479                if (ret)
1480                        goto err;
1481        }
1482
1483        /* firmware version */
1484        ret = af9013_rd_regs(state, 0x5103, buf, 4);
1485        if (ret)
1486                goto err;
1487
1488        dev_info(&state->i2c->dev, "%s: firmware version %d.%d.%d.%d\n",
1489                        KBUILD_MODNAME, buf[0], buf[1], buf[2], buf[3]);
1490
1491        /* set GPIOs */
1492        for (i = 0; i < sizeof(state->config.gpio); i++) {
1493                ret = af9013_set_gpio(state, i, state->config.gpio[i]);
1494                if (ret)
1495                        goto err;
1496        }
1497
1498        /* create dvb_frontend */
1499        memcpy(&state->fe.ops, &af9013_ops,
1500                sizeof(struct dvb_frontend_ops));
1501        state->fe.demodulator_priv = state;
1502
1503        INIT_DELAYED_WORK(&state->statistics_work, af9013_statistics_work);
1504
1505        return &state->fe;
1506err:
1507        kfree(state);
1508        return NULL;
1509}
1510EXPORT_SYMBOL(af9013_attach);
1511
1512static struct dvb_frontend_ops af9013_ops = {
1513        .delsys = { SYS_DVBT },
1514        .info = {
1515                .name = "Afatech AF9013",
1516                .frequency_min = 174000000,
1517                .frequency_max = 862000000,
1518                .frequency_stepsize = 250000,
1519                .frequency_tolerance = 0,
1520                .caps = FE_CAN_FEC_1_2 |
1521                        FE_CAN_FEC_2_3 |
1522                        FE_CAN_FEC_3_4 |
1523                        FE_CAN_FEC_5_6 |
1524                        FE_CAN_FEC_7_8 |
1525                        FE_CAN_FEC_AUTO |
1526                        FE_CAN_QPSK |
1527                        FE_CAN_QAM_16 |
1528                        FE_CAN_QAM_64 |
1529                        FE_CAN_QAM_AUTO |
1530                        FE_CAN_TRANSMISSION_MODE_AUTO |
1531                        FE_CAN_GUARD_INTERVAL_AUTO |
1532                        FE_CAN_HIERARCHY_AUTO |
1533                        FE_CAN_RECOVER |
1534                        FE_CAN_MUTE_TS
1535        },
1536
1537        .release = af9013_release,
1538
1539        .init = af9013_init,
1540        .sleep = af9013_sleep,
1541
1542        .get_tune_settings = af9013_get_tune_settings,
1543        .set_frontend = af9013_set_frontend,
1544        .get_frontend = af9013_get_frontend,
1545
1546        .read_status = af9013_read_status,
1547        .read_snr = af9013_read_snr,
1548        .read_signal_strength = af9013_read_signal_strength,
1549        .read_ber = af9013_read_ber,
1550        .read_ucblocks = af9013_read_ucblocks,
1551
1552        .i2c_gate_ctrl = af9013_i2c_gate_ctrl,
1553};
1554
1555MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
1556MODULE_DESCRIPTION("Afatech AF9013 DVB-T demodulator driver");
1557MODULE_LICENSE("GPL");
1558MODULE_FIRMWARE(AF9013_FIRMWARE);
1559