LXR linux/drivers/media/usb/au0828/au0828-cards.c

   1/*
   2 *  Driver for the Auvitek USB bridge
   3 *
   4 *  Copyright (c) 2008 Steven Toth <stoth@linuxtv.org>
   5 *
   6 *  This program is free software; you can redistribute it and/or modify
   7 *  it under the terms of the GNU General Public License as published by
   8 *  the Free Software Foundation; either version 2 of the License, or
   9 *  (at your option) any later version.
  10 *
  11 *  This program is distributed in the hope that it will be useful,
  12 *  but WITHOUT ANY WARRANTY; without even the implied warranty of
  13 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  14 *
  15 *  GNU General Public License for more details.
  16 *
  17 *  You should have received a copy of the GNU General Public License
  18 *  along with this program; if not, write to the Free Software
  19 *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  20 */
  21
  22#include "au0828.h"
  23#include "au0828-cards.h"
  24#include "au8522.h"
  25#include "media/tuner.h"
  26#include "media/v4l2-common.h"
  27
  28static void hvr950q_cs5340_audio(void *priv, int enable)
  29{
  30        /* Because the HVR-950q shares an i2s bus between the cs5340 and the
  31           au8522, we need to hold cs5340 in reset when using the au8522 */
  32        struct au0828_dev *dev = priv;
  33        if (enable == 1)
  34                au0828_set(dev, REG_000, 0x10);
  35        else
  36                au0828_clear(dev, REG_000, 0x10);
  37}
  38
  39struct au0828_board au0828_boards[] = {
  40        [AU0828_BOARD_UNKNOWN] = {
  41                .name   = "Unknown board",
  42                .tuner_type = UNSET,
  43                .tuner_addr = ADDR_UNSET,
  44        },
  45        [AU0828_BOARD_HAUPPAUGE_HVR850] = {
  46                .name   = "Hauppauge HVR850",
  47                .tuner_type = TUNER_XC5000,
  48                .tuner_addr = 0x61,
  49                .i2c_clk_divider = AU0828_I2C_CLK_20KHZ,
  50                .input = {
  51                        {
  52                                .type = AU0828_VMUX_TELEVISION,
  53                                .vmux = AU8522_COMPOSITE_CH4_SIF,
  54                                .amux = AU8522_AUDIO_SIF,
  55                        },
  56                        {
  57                                .type = AU0828_VMUX_COMPOSITE,
  58                                .vmux = AU8522_COMPOSITE_CH1,
  59                                .amux = AU8522_AUDIO_NONE,
  60                                .audio_setup = hvr950q_cs5340_audio,
  61                        },
  62                        {
  63                                .type = AU0828_VMUX_SVIDEO,
  64                                .vmux = AU8522_SVIDEO_CH13,
  65                                .amux = AU8522_AUDIO_NONE,
  66                                .audio_setup = hvr950q_cs5340_audio,
  67                        },
  68                },
  69        },
  70        [AU0828_BOARD_HAUPPAUGE_HVR950Q] = {
  71                .name   = "Hauppauge HVR950Q",
  72                .tuner_type = TUNER_XC5000,
  73                .tuner_addr = 0x61,
  74                /* The au0828 hardware i2c implementation does not properly
  75                   support the xc5000's i2c clock stretching.  So we need to
  76                   lower the clock frequency enough where the 15us clock
  77                   stretch fits inside of a normal clock cycle, or else the
  78                   au0828 fails to set the STOP bit.  A 30 KHz clock puts the
  79                   clock pulse width at 18us */
  80                .i2c_clk_divider = AU0828_I2C_CLK_20KHZ,
  81                .input = {
  82                        {
  83                                .type = AU0828_VMUX_TELEVISION,
  84                                .vmux = AU8522_COMPOSITE_CH4_SIF,
  85                                .amux = AU8522_AUDIO_SIF,
  86                        },
  87                        {
  88                                .type = AU0828_VMUX_COMPOSITE,
  89                                .vmux = AU8522_COMPOSITE_CH1,
  90                                .amux = AU8522_AUDIO_NONE,
  91                                .audio_setup = hvr950q_cs5340_audio,
  92                        },
  93                        {
  94                                .type = AU0828_VMUX_SVIDEO,
  95                                .vmux = AU8522_SVIDEO_CH13,
  96                                .amux = AU8522_AUDIO_NONE,
  97                                .audio_setup = hvr950q_cs5340_audio,
  98                        },
  99                },
 100        },
 101        [AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL] = {
 102                .name   = "Hauppauge HVR950Q rev xxF8",
 103                .tuner_type = UNSET,
 104                .tuner_addr = ADDR_UNSET,
 105                .i2c_clk_divider = AU0828_I2C_CLK_250KHZ,
 106        },
 107        [AU0828_BOARD_DVICO_FUSIONHDTV7] = {
 108                .name   = "DViCO FusionHDTV USB",
 109                .tuner_type = UNSET,
 110                .tuner_addr = ADDR_UNSET,
 111                .i2c_clk_divider = AU0828_I2C_CLK_250KHZ,
 112        },
 113        [AU0828_BOARD_HAUPPAUGE_WOODBURY] = {
 114                .name = "Hauppauge Woodbury",
 115                .tuner_type = UNSET,
 116                .tuner_addr = ADDR_UNSET,
 117                .i2c_clk_divider = AU0828_I2C_CLK_250KHZ,
 118        },
 119};
 120
 121/* Tuner callback function for au0828 boards. Currently only needed
 122 * for HVR1500Q, which has an xc5000 tuner.
 123 */
 124int au0828_tuner_callback(void *priv, int component, int command, int arg)
 125{
 126        struct au0828_dev *dev = priv;
 127
 128        dprintk(1, "%s()\n", __func__);
 129
 130        switch (dev->boardnr) {
 131        case AU0828_BOARD_HAUPPAUGE_HVR850:
 132        case AU0828_BOARD_HAUPPAUGE_HVR950Q:
 133        case AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL:
 134        case AU0828_BOARD_DVICO_FUSIONHDTV7:
 135                if (command == 0) {
 136                        /* Tuner Reset Command from xc5000 */
 137                        /* Drive the tuner into reset and out */
 138                        au0828_clear(dev, REG_001, 2);
 139                        mdelay(10);
 140                        au0828_set(dev, REG_001, 2);
 141                        mdelay(10);
 142                        return 0;
 143                } else {
 144                        printk(KERN_ERR
 145                                "%s(): Unknown command.\n", __func__);
 146                        return -EINVAL;
 147                }
 148                break;
 149        }
 150
 151        return 0; /* Should never be here */
 152}
 153
 154static void hauppauge_eeprom(struct au0828_dev *dev, u8 *eeprom_data)
 155{
 156        struct tveeprom tv;
 157
 158        tveeprom_hauppauge_analog(&dev->i2c_client, &tv, eeprom_data);
 159        dev->board.tuner_type = tv.tuner_type;
 160
 161        /* Make sure we support the board model */
 162        switch (tv.model) {
 163        case 72000: /* WinTV-HVR950q (Retail, IR, ATSC/QAM */
 164        case 72001: /* WinTV-HVR950q (Retail, IR, ATSC/QAM and analog video */
 165        case 72101: /* WinTV-HVR950q (Retail, IR, ATSC/QAM and analog video */
 166        case 72201: /* WinTV-HVR950q (OEM, IR, ATSC/QAM and analog video */
 167        case 72211: /* WinTV-HVR950q (OEM, IR, ATSC/QAM and analog video */
 168        case 72221: /* WinTV-HVR950q (OEM, IR, ATSC/QAM and analog video */
 169        case 72231: /* WinTV-HVR950q (OEM, IR, ATSC/QAM and analog video */
 170        case 72241: /* WinTV-HVR950q (OEM, No IR, ATSC/QAM and analog video */
 171        case 72251: /* WinTV-HVR950q (Retail, IR, ATSC/QAM and analog video */
 172        case 72261: /* WinTV-HVR950q (OEM, No IR, ATSC/QAM and analog video */
 173        case 72271: /* WinTV-HVR950q (OEM, No IR, ATSC/QAM and analog video */
 174        case 72281: /* WinTV-HVR950q (OEM, No IR, ATSC/QAM and analog video */
 175        case 72301: /* WinTV-HVR850 (Retail, IR, ATSC and analog video */
 176        case 72500: /* WinTV-HVR950q (OEM, No IR, ATSC/QAM */
 177                break;
 178        default:
 179                printk(KERN_WARNING "%s: warning: "
 180                       "unknown hauppauge model #%d\n", __func__, tv.model);
 181                break;
 182        }
 183
 184        printk(KERN_INFO "%s: hauppauge eeprom: model=%d\n",
 185               __func__, tv.model);
 186}
 187
 188void au0828_card_analog_fe_setup(struct au0828_dev *dev);
 189
 190void au0828_card_setup(struct au0828_dev *dev)
 191{
 192        static u8 eeprom[256];
 193
 194        dprintk(1, "%s()\n", __func__);
 195
 196        dev->board = au0828_boards[dev->boardnr];
 197
 198        if (dev->i2c_rc == 0) {
 199                dev->i2c_client.addr = 0xa0 >> 1;
 200                tveeprom_read(&dev->i2c_client, eeprom, sizeof(eeprom));
 201        }
 202
 203        switch (dev->boardnr) {
 204        case AU0828_BOARD_HAUPPAUGE_HVR850:
 205        case AU0828_BOARD_HAUPPAUGE_HVR950Q:
 206        case AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL:
 207        case AU0828_BOARD_HAUPPAUGE_WOODBURY:
 208                if (dev->i2c_rc == 0)
 209                        hauppauge_eeprom(dev, eeprom+0xa0);
 210                break;
 211        }
 212
 213        au0828_card_analog_fe_setup(dev);
 214}
 215
 216void au0828_card_analog_fe_setup(struct au0828_dev *dev)
 217{
 218#ifdef CONFIG_VIDEO_AU0828_V4L2
 219        struct tuner_setup tun_setup;
 220        struct v4l2_subdev *sd;
 221        unsigned int mode_mask = T_ANALOG_TV;
 222
 223        if (AUVI_INPUT(0).type != AU0828_VMUX_UNDEFINED) {
 224                /* Load the analog demodulator driver (note this would need to
 225                   be abstracted out if we ever need to support a different
 226                   demod) */
 227                sd = v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
 228                                "au8522", 0x8e >> 1, NULL);
 229                if (sd == NULL)
 230                        printk(KERN_ERR "analog subdev registration failed\n");
 231        }
 232
 233        /* Setup tuners */
 234        if (dev->board.tuner_type != TUNER_ABSENT) {
 235                /* Load the tuner module, which does the attach */
 236                sd = v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
 237                                "tuner", dev->board.tuner_addr, NULL);
 238                if (sd == NULL)
 239                        printk(KERN_ERR "tuner subdev registration fail\n");
 240
 241                tun_setup.mode_mask      = mode_mask;
 242                tun_setup.type           = dev->board.tuner_type;
 243                tun_setup.addr           = dev->board.tuner_addr;
 244                tun_setup.tuner_callback = au0828_tuner_callback;
 245                v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_type_addr,
 246                                     &tun_setup);
 247        }
 248#endif
 249}
 250
 251/*
 252 * The bridge has between 8 and 12 gpios.
 253 * Regs 1 and 0 deal with output enables.
 254 * Regs 3 and 2 deal with direction.
 255 */
 256void au0828_gpio_setup(struct au0828_dev *dev)
 257{
 258        dprintk(1, "%s()\n", __func__);
 259
 260        switch (dev->boardnr) {
 261        case AU0828_BOARD_HAUPPAUGE_HVR850:
 262        case AU0828_BOARD_HAUPPAUGE_HVR950Q:
 263        case AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL:
 264        case AU0828_BOARD_HAUPPAUGE_WOODBURY:
 265                /* GPIO's
 266                 * 4 - CS5340
 267                 * 5 - AU8522 Demodulator
 268                 * 6 - eeprom W/P
 269                 * 7 - power supply
 270                 * 9 - XC5000 Tuner
 271                 */
 272
 273                /* Into reset */
 274                au0828_write(dev, REG_003, 0x02);
 275                au0828_write(dev, REG_002, 0x80 | 0x20 | 0x10);
 276                au0828_write(dev, REG_001, 0x0);
 277                au0828_write(dev, REG_000, 0x0);
 278                msleep(100);
 279
 280                /* Out of reset (leave the cs5340 in reset until needed) */
 281                au0828_write(dev, REG_003, 0x02);
 282                au0828_write(dev, REG_001, 0x02);
 283                au0828_write(dev, REG_002, 0x80 | 0x20 | 0x10);
 284                au0828_write(dev, REG_000, 0x80 | 0x40 | 0x20);
 285
 286                msleep(250);
 287                break;
 288        case AU0828_BOARD_DVICO_FUSIONHDTV7:
 289                /* GPIO's
 290                 * 6 - ?
 291                 * 8 - AU8522 Demodulator
 292                 * 9 - XC5000 Tuner
 293                 */
 294
 295                /* Into reset */
 296                au0828_write(dev, REG_003, 0x02);
 297                au0828_write(dev, REG_002, 0xa0);
 298                au0828_write(dev, REG_001, 0x0);
 299                au0828_write(dev, REG_000, 0x0);
 300                msleep(100);
 301
 302                /* Out of reset */
 303                au0828_write(dev, REG_003, 0x02);
 304                au0828_write(dev, REG_002, 0xa0);
 305                au0828_write(dev, REG_001, 0x02);
 306                au0828_write(dev, REG_000, 0xa0);
 307                msleep(250);
 308                break;
 309        }
 310}
 311
 312/* table of devices that work with this driver */
 313struct usb_device_id au0828_usb_id_table[] = {
 314        { USB_DEVICE(0x2040, 0x7200),
 315                .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q },
 316        { USB_DEVICE(0x2040, 0x7240),
 317                .driver_info = AU0828_BOARD_HAUPPAUGE_HVR850 },
 318        { USB_DEVICE(0x0fe9, 0xd620),
 319                .driver_info = AU0828_BOARD_DVICO_FUSIONHDTV7 },
 320        { USB_DEVICE(0x2040, 0x7210),
 321                .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q },
 322        { USB_DEVICE(0x2040, 0x7217),
 323                .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q },
 324        { USB_DEVICE(0x2040, 0x721b),
 325                .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q },
 326        { USB_DEVICE(0x2040, 0x721e),
 327                .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q },
 328        { USB_DEVICE(0x2040, 0x721f),
 329                .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q },
 330        { USB_DEVICE(0x2040, 0x7280),
 331                .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q },
 332        { USB_DEVICE(0x0fd9, 0x0008),
 333                .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q },
 334        { USB_DEVICE(0x2040, 0x7201),
 335                .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL },
 336        { USB_DEVICE(0x2040, 0x7211),
 337                .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL },
 338        { USB_DEVICE(0x2040, 0x7281),
 339                .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL },
 340        { USB_DEVICE(0x05e1, 0x0480),
 341                .driver_info = AU0828_BOARD_HAUPPAUGE_WOODBURY },
 342        { USB_DEVICE(0x2040, 0x8200),
 343                .driver_info = AU0828_BOARD_HAUPPAUGE_WOODBURY },
 344        { USB_DEVICE(0x2040, 0x7260),
 345                .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q },
 346        { USB_DEVICE(0x2040, 0x7213),
 347                .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q },
 348        { USB_DEVICE(0x2040, 0x7270),
 349                .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q },
 350        { },
 351};
 352
 353MODULE_DEVICE_TABLE(usb, au0828_usb_id_table);
 354