linux/drivers/usb/host/oxu210hp-hcd.c
<<
>>
Prefs
   1/*
   2 * Copyright (c) 2008 Rodolfo Giometti <giometti@linux.it>
   3 * Copyright (c) 2008 Eurotech S.p.A. <info@eurtech.it>
   4 *
   5 * This code is *strongly* based on EHCI-HCD code by David Brownell since
   6 * the chip is a quasi-EHCI compatible.
   7 *
   8 * This program is free software; you can redistribute it and/or modify it
   9 * under the terms of the GNU General Public License as published by the
  10 * Free Software Foundation; either version 2 of the License, or (at your
  11 * option) any later version.
  12 *
  13 * This program is distributed in the hope that it will be useful, but
  14 * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
  15 * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
  16 * for more details.
  17 *
  18 * You should have received a copy of the GNU General Public License
  19 * along with this program; if not, write to the Free Software Foundation,
  20 * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  21 */
  22
  23#include <linux/module.h>
  24#include <linux/pci.h>
  25#include <linux/dmapool.h>
  26#include <linux/kernel.h>
  27#include <linux/delay.h>
  28#include <linux/ioport.h>
  29#include <linux/sched.h>
  30#include <linux/slab.h>
  31#include <linux/errno.h>
  32#include <linux/timer.h>
  33#include <linux/list.h>
  34#include <linux/interrupt.h>
  35#include <linux/usb.h>
  36#include <linux/usb/hcd.h>
  37#include <linux/moduleparam.h>
  38#include <linux/dma-mapping.h>
  39#include <linux/io.h>
  40
  41#include <asm/irq.h>
  42#include <asm/unaligned.h>
  43
  44#include <linux/irq.h>
  45#include <linux/platform_device.h>
  46
  47#include "oxu210hp.h"
  48
  49#define DRIVER_VERSION "0.0.50"
  50
  51/*
  52 * Main defines
  53 */
  54
  55#define oxu_dbg(oxu, fmt, args...) \
  56                dev_dbg(oxu_to_hcd(oxu)->self.controller , fmt , ## args)
  57#define oxu_err(oxu, fmt, args...) \
  58                dev_err(oxu_to_hcd(oxu)->self.controller , fmt , ## args)
  59#define oxu_info(oxu, fmt, args...) \
  60                dev_info(oxu_to_hcd(oxu)->self.controller , fmt , ## args)
  61
  62#ifdef CONFIG_DYNAMIC_DEBUG
  63#define DEBUG
  64#endif
  65
  66static inline struct usb_hcd *oxu_to_hcd(struct oxu_hcd *oxu)
  67{
  68        return container_of((void *) oxu, struct usb_hcd, hcd_priv);
  69}
  70
  71static inline struct oxu_hcd *hcd_to_oxu(struct usb_hcd *hcd)
  72{
  73        return (struct oxu_hcd *) (hcd->hcd_priv);
  74}
  75
  76/*
  77 * Debug stuff
  78 */
  79
  80#undef OXU_URB_TRACE
  81#undef OXU_VERBOSE_DEBUG
  82
  83#ifdef OXU_VERBOSE_DEBUG
  84#define oxu_vdbg                        oxu_dbg
  85#else
  86#define oxu_vdbg(oxu, fmt, args...)     /* Nop */
  87#endif
  88
  89#ifdef DEBUG
  90
  91static int __attribute__((__unused__))
  92dbg_status_buf(char *buf, unsigned len, const char *label, u32 status)
  93{
  94        return scnprintf(buf, len, "%s%sstatus %04x%s%s%s%s%s%s%s%s%s%s",
  95                label, label[0] ? " " : "", status,
  96                (status & STS_ASS) ? " Async" : "",
  97                (status & STS_PSS) ? " Periodic" : "",
  98                (status & STS_RECL) ? " Recl" : "",
  99                (status & STS_HALT) ? " Halt" : "",
 100                (status & STS_IAA) ? " IAA" : "",
 101                (status & STS_FATAL) ? " FATAL" : "",
 102                (status & STS_FLR) ? " FLR" : "",
 103                (status & STS_PCD) ? " PCD" : "",
 104                (status & STS_ERR) ? " ERR" : "",
 105                (status & STS_INT) ? " INT" : ""
 106                );
 107}
 108
 109static int __attribute__((__unused__))
 110dbg_intr_buf(char *buf, unsigned len, const char *label, u32 enable)
 111{
 112        return scnprintf(buf, len, "%s%sintrenable %02x%s%s%s%s%s%s",
 113                label, label[0] ? " " : "", enable,
 114                (enable & STS_IAA) ? " IAA" : "",
 115                (enable & STS_FATAL) ? " FATAL" : "",
 116                (enable & STS_FLR) ? " FLR" : "",
 117                (enable & STS_PCD) ? " PCD" : "",
 118                (enable & STS_ERR) ? " ERR" : "",
 119                (enable & STS_INT) ? " INT" : ""
 120                );
 121}
 122
 123static const char *const fls_strings[] =
 124    { "1024", "512", "256", "??" };
 125
 126static int dbg_command_buf(char *buf, unsigned len,
 127                                const char *label, u32 command)
 128{
 129        return scnprintf(buf, len,
 130                "%s%scommand %06x %s=%d ithresh=%d%s%s%s%s period=%s%s %s",
 131                label, label[0] ? " " : "", command,
 132                (command & CMD_PARK) ? "park" : "(park)",
 133                CMD_PARK_CNT(command),
 134                (command >> 16) & 0x3f,
 135                (command & CMD_LRESET) ? " LReset" : "",
 136                (command & CMD_IAAD) ? " IAAD" : "",
 137                (command & CMD_ASE) ? " Async" : "",
 138                (command & CMD_PSE) ? " Periodic" : "",
 139                fls_strings[(command >> 2) & 0x3],
 140                (command & CMD_RESET) ? " Reset" : "",
 141                (command & CMD_RUN) ? "RUN" : "HALT"
 142                );
 143}
 144
 145static int dbg_port_buf(char *buf, unsigned len, const char *label,
 146                                int port, u32 status)
 147{
 148        char    *sig;
 149
 150        /* signaling state */
 151        switch (status & (3 << 10)) {
 152        case 0 << 10:
 153                sig = "se0";
 154                break;
 155        case 1 << 10:
 156                sig = "k";      /* low speed */
 157                break;
 158        case 2 << 10:
 159                sig = "j";
 160                break;
 161        default:
 162                sig = "?";
 163                break;
 164        }
 165
 166        return scnprintf(buf, len,
 167                "%s%sport %d status %06x%s%s sig=%s%s%s%s%s%s%s%s%s%s",
 168                label, label[0] ? " " : "", port, status,
 169                (status & PORT_POWER) ? " POWER" : "",
 170                (status & PORT_OWNER) ? " OWNER" : "",
 171                sig,
 172                (status & PORT_RESET) ? " RESET" : "",
 173                (status & PORT_SUSPEND) ? " SUSPEND" : "",
 174                (status & PORT_RESUME) ? " RESUME" : "",
 175                (status & PORT_OCC) ? " OCC" : "",
 176                (status & PORT_OC) ? " OC" : "",
 177                (status & PORT_PEC) ? " PEC" : "",
 178                (status & PORT_PE) ? " PE" : "",
 179                (status & PORT_CSC) ? " CSC" : "",
 180                (status & PORT_CONNECT) ? " CONNECT" : ""
 181            );
 182}
 183
 184#else
 185
 186static inline int __attribute__((__unused__))
 187dbg_status_buf(char *buf, unsigned len, const char *label, u32 status)
 188{ return 0; }
 189
 190static inline int __attribute__((__unused__))
 191dbg_command_buf(char *buf, unsigned len, const char *label, u32 command)
 192{ return 0; }
 193
 194static inline int __attribute__((__unused__))
 195dbg_intr_buf(char *buf, unsigned len, const char *label, u32 enable)
 196{ return 0; }
 197
 198static inline int __attribute__((__unused__))
 199dbg_port_buf(char *buf, unsigned len, const char *label, int port, u32 status)
 200{ return 0; }
 201
 202#endif /* DEBUG */
 203
 204/* functions have the "wrong" filename when they're output... */
 205#define dbg_status(oxu, label, status) { \
 206        char _buf[80]; \
 207        dbg_status_buf(_buf, sizeof _buf, label, status); \
 208        oxu_dbg(oxu, "%s\n", _buf); \
 209}
 210
 211#define dbg_cmd(oxu, label, command) { \
 212        char _buf[80]; \
 213        dbg_command_buf(_buf, sizeof _buf, label, command); \
 214        oxu_dbg(oxu, "%s\n", _buf); \
 215}
 216
 217#define dbg_port(oxu, label, port, status) { \
 218        char _buf[80]; \
 219        dbg_port_buf(_buf, sizeof _buf, label, port, status); \
 220        oxu_dbg(oxu, "%s\n", _buf); \
 221}
 222
 223/*
 224 * Module parameters
 225 */
 226
 227/* Initial IRQ latency: faster than hw default */
 228static int log2_irq_thresh;                     /* 0 to 6 */
 229module_param(log2_irq_thresh, int, S_IRUGO);
 230MODULE_PARM_DESC(log2_irq_thresh, "log2 IRQ latency, 1-64 microframes");
 231
 232/* Initial park setting: slower than hw default */
 233static unsigned park;
 234module_param(park, uint, S_IRUGO);
 235MODULE_PARM_DESC(park, "park setting; 1-3 back-to-back async packets");
 236
 237/* For flakey hardware, ignore overcurrent indicators */
 238static bool ignore_oc;
 239module_param(ignore_oc, bool, S_IRUGO);
 240MODULE_PARM_DESC(ignore_oc, "ignore bogus hardware overcurrent indications");
 241
 242
 243static void ehci_work(struct oxu_hcd *oxu);
 244static int oxu_hub_control(struct usb_hcd *hcd,
 245                                u16 typeReq, u16 wValue, u16 wIndex,
 246                                char *buf, u16 wLength);
 247
 248/*
 249 * Local functions
 250 */
 251
 252/* Low level read/write registers functions */
 253static inline u32 oxu_readl(void *base, u32 reg)
 254{
 255        return readl(base + reg);
 256}
 257
 258static inline void oxu_writel(void *base, u32 reg, u32 val)
 259{
 260        writel(val, base + reg);
 261}
 262
 263static inline void timer_action_done(struct oxu_hcd *oxu,
 264                                        enum ehci_timer_action action)
 265{
 266        clear_bit(action, &oxu->actions);
 267}
 268
 269static inline void timer_action(struct oxu_hcd *oxu,
 270                                        enum ehci_timer_action action)
 271{
 272        if (!test_and_set_bit(action, &oxu->actions)) {
 273                unsigned long t;
 274
 275                switch (action) {
 276                case TIMER_IAA_WATCHDOG:
 277                        t = EHCI_IAA_JIFFIES;
 278                        break;
 279                case TIMER_IO_WATCHDOG:
 280                        t = EHCI_IO_JIFFIES;
 281                        break;
 282                case TIMER_ASYNC_OFF:
 283                        t = EHCI_ASYNC_JIFFIES;
 284                        break;
 285                case TIMER_ASYNC_SHRINK:
 286                default:
 287                        t = EHCI_SHRINK_JIFFIES;
 288                        break;
 289                }
 290                t += jiffies;
 291                /* all timings except IAA watchdog can be overridden.
 292                 * async queue SHRINK often precedes IAA.  while it's ready
 293                 * to go OFF neither can matter, and afterwards the IO
 294                 * watchdog stops unless there's still periodic traffic.
 295                 */
 296                if (action != TIMER_IAA_WATCHDOG
 297                                && t > oxu->watchdog.expires
 298                                && timer_pending(&oxu->watchdog))
 299                        return;
 300                mod_timer(&oxu->watchdog, t);
 301        }
 302}
 303
 304/*
 305 * handshake - spin reading hc until handshake completes or fails
 306 * @ptr: address of hc register to be read
 307 * @mask: bits to look at in result of read
 308 * @done: value of those bits when handshake succeeds
 309 * @usec: timeout in microseconds
 310 *
 311 * Returns negative errno, or zero on success
 312 *
 313 * Success happens when the "mask" bits have the specified value (hardware
 314 * handshake done).  There are two failure modes:  "usec" have passed (major
 315 * hardware flakeout), or the register reads as all-ones (hardware removed).
 316 *
 317 * That last failure should_only happen in cases like physical cardbus eject
 318 * before driver shutdown. But it also seems to be caused by bugs in cardbus
 319 * bridge shutdown:  shutting down the bridge before the devices using it.
 320 */
 321static int handshake(struct oxu_hcd *oxu, void __iomem *ptr,
 322                                        u32 mask, u32 done, int usec)
 323{
 324        u32 result;
 325
 326        do {
 327                result = readl(ptr);
 328                if (result == ~(u32)0)          /* card removed */
 329                        return -ENODEV;
 330                result &= mask;
 331                if (result == done)
 332                        return 0;
 333                udelay(1);
 334                usec--;
 335        } while (usec > 0);
 336        return -ETIMEDOUT;
 337}
 338
 339/* Force HC to halt state from unknown (EHCI spec section 2.3) */
 340static int ehci_halt(struct oxu_hcd *oxu)
 341{
 342        u32     temp = readl(&oxu->regs->status);
 343
 344        /* disable any irqs left enabled by previous code */
 345        writel(0, &oxu->regs->intr_enable);
 346
 347        if ((temp & STS_HALT) != 0)
 348                return 0;
 349
 350        temp = readl(&oxu->regs->command);
 351        temp &= ~CMD_RUN;
 352        writel(temp, &oxu->regs->command);
 353        return handshake(oxu, &oxu->regs->status,
 354                          STS_HALT, STS_HALT, 16 * 125);
 355}
 356
 357/* Put TDI/ARC silicon into EHCI mode */
 358static void tdi_reset(struct oxu_hcd *oxu)
 359{
 360        u32 __iomem *reg_ptr;
 361        u32 tmp;
 362
 363        reg_ptr = (u32 __iomem *)(((u8 __iomem *)oxu->regs) + 0x68);
 364        tmp = readl(reg_ptr);
 365        tmp |= 0x3;
 366        writel(tmp, reg_ptr);
 367}
 368
 369/* Reset a non-running (STS_HALT == 1) controller */
 370static int ehci_reset(struct oxu_hcd *oxu)
 371{
 372        int     retval;
 373        u32     command = readl(&oxu->regs->command);
 374
 375        command |= CMD_RESET;
 376        dbg_cmd(oxu, "reset", command);
 377        writel(command, &oxu->regs->command);
 378        oxu_to_hcd(oxu)->state = HC_STATE_HALT;
 379        oxu->next_statechange = jiffies;
 380        retval = handshake(oxu, &oxu->regs->command,
 381                            CMD_RESET, 0, 250 * 1000);
 382
 383        if (retval)
 384                return retval;
 385
 386        tdi_reset(oxu);
 387
 388        return retval;
 389}
 390
 391/* Idle the controller (from running) */
 392static void ehci_quiesce(struct oxu_hcd *oxu)
 393{
 394        u32     temp;
 395
 396#ifdef DEBUG
 397        if (!HC_IS_RUNNING(oxu_to_hcd(oxu)->state))
 398                BUG();
 399#endif
 400
 401        /* wait for any schedule enables/disables to take effect */
 402        temp = readl(&oxu->regs->command) << 10;
 403        temp &= STS_ASS | STS_PSS;
 404        if (handshake(oxu, &oxu->regs->status, STS_ASS | STS_PSS,
 405                                temp, 16 * 125) != 0) {
 406                oxu_to_hcd(oxu)->state = HC_STATE_HALT;
 407                return;
 408        }
 409
 410        /* then disable anything that's still active */
 411        temp = readl(&oxu->regs->command);
 412        temp &= ~(CMD_ASE | CMD_IAAD | CMD_PSE);
 413        writel(temp, &oxu->regs->command);
 414
 415        /* hardware can take 16 microframes to turn off ... */
 416        if (handshake(oxu, &oxu->regs->status, STS_ASS | STS_PSS,
 417                                0, 16 * 125) != 0) {
 418                oxu_to_hcd(oxu)->state = HC_STATE_HALT;
 419                return;
 420        }
 421}
 422
 423static int check_reset_complete(struct oxu_hcd *oxu, int index,
 424                                u32 __iomem *status_reg, int port_status)
 425{
 426        if (!(port_status & PORT_CONNECT)) {
 427                oxu->reset_done[index] = 0;
 428                return port_status;
 429        }
 430
 431        /* if reset finished and it's still not enabled -- handoff */
 432        if (!(port_status & PORT_PE)) {
 433                oxu_dbg(oxu, "Failed to enable port %d on root hub TT\n",
 434                                index+1);
 435                return port_status;
 436        } else
 437                oxu_dbg(oxu, "port %d high speed\n", index + 1);
 438
 439        return port_status;
 440}
 441
 442static void ehci_hub_descriptor(struct oxu_hcd *oxu,
 443                                struct usb_hub_descriptor *desc)
 444{
 445        int ports = HCS_N_PORTS(oxu->hcs_params);
 446        u16 temp;
 447
 448        desc->bDescriptorType = 0x29;
 449        desc->bPwrOn2PwrGood = 10;      /* oxu 1.0, 2.3.9 says 20ms max */
 450        desc->bHubContrCurrent = 0;
 451
 452        desc->bNbrPorts = ports;
 453        temp = 1 + (ports / 8);
 454        desc->bDescLength = 7 + 2 * temp;
 455
 456        /* ports removable, and usb 1.0 legacy PortPwrCtrlMask */
 457        memset(&desc->u.hs.DeviceRemovable[0], 0, temp);
 458        memset(&desc->u.hs.DeviceRemovable[temp], 0xff, temp);
 459
 460        temp = 0x0008;                  /* per-port overcurrent reporting */
 461        if (HCS_PPC(oxu->hcs_params))
 462                temp |= 0x0001;         /* per-port power control */
 463        else
 464                temp |= 0x0002;         /* no power switching */
 465        desc->wHubCharacteristics = (__force __u16)cpu_to_le16(temp);
 466}
 467
 468
 469/* Allocate an OXU210HP on-chip memory data buffer
 470 *
 471 * An on-chip memory data buffer is required for each OXU210HP USB transfer.
 472 * Each transfer descriptor has one or more on-chip memory data buffers.
 473 *
 474 * Data buffers are allocated from a fix sized pool of data blocks.
 475 * To minimise fragmentation and give reasonable memory utlisation,
 476 * data buffers are allocated with sizes the power of 2 multiples of
 477 * the block size, starting on an address a multiple of the allocated size.
 478 *
 479 * FIXME: callers of this function require a buffer to be allocated for
 480 * len=0. This is a waste of on-chip memory and should be fix. Then this
 481 * function should be changed to not allocate a buffer for len=0.
 482 */
 483static int oxu_buf_alloc(struct oxu_hcd *oxu, struct ehci_qtd *qtd, int len)
 484{
 485        int n_blocks;   /* minium blocks needed to hold len */
 486        int a_blocks;   /* blocks allocated */
 487        int i, j;
 488
 489        /* Don't allocte bigger than supported */
 490        if (len > BUFFER_SIZE * BUFFER_NUM) {
 491                oxu_err(oxu, "buffer too big (%d)\n", len);
 492                return -ENOMEM;
 493        }
 494
 495        spin_lock(&oxu->mem_lock);
 496
 497        /* Number of blocks needed to hold len */
 498        n_blocks = (len + BUFFER_SIZE - 1) / BUFFER_SIZE;
 499
 500        /* Round the number of blocks up to the power of 2 */
 501        for (a_blocks = 1; a_blocks < n_blocks; a_blocks <<= 1)
 502                ;
 503
 504        /* Find a suitable available data buffer */
 505        for (i = 0; i < BUFFER_NUM;
 506                        i += max(a_blocks, (int)oxu->db_used[i])) {
 507
 508                /* Check all the required blocks are available */
 509                for (j = 0; j < a_blocks; j++)
 510                        if (oxu->db_used[i + j])
 511                                break;
 512
 513                if (j != a_blocks)
 514                        continue;
 515
 516                /* Allocate blocks found! */
 517                qtd->buffer = (void *) &oxu->mem->db_pool[i];
 518                qtd->buffer_dma = virt_to_phys(qtd->buffer);
 519
 520                qtd->qtd_buffer_len = BUFFER_SIZE * a_blocks;
 521                oxu->db_used[i] = a_blocks;
 522
 523                spin_unlock(&oxu->mem_lock);
 524
 525                return 0;
 526        }
 527
 528        /* Failed */
 529
 530        spin_unlock(&oxu->mem_lock);
 531
 532        return -ENOMEM;
 533}
 534
 535static void oxu_buf_free(struct oxu_hcd *oxu, struct ehci_qtd *qtd)
 536{
 537        int index;
 538
 539        spin_lock(&oxu->mem_lock);
 540
 541        index = (qtd->buffer - (void *) &oxu->mem->db_pool[0])
 542                                                         / BUFFER_SIZE;
 543        oxu->db_used[index] = 0;
 544        qtd->qtd_buffer_len = 0;
 545        qtd->buffer_dma = 0;
 546        qtd->buffer = NULL;
 547
 548        spin_unlock(&oxu->mem_lock);
 549}
 550
 551static inline void ehci_qtd_init(struct ehci_qtd *qtd, dma_addr_t dma)
 552{
 553        memset(qtd, 0, sizeof *qtd);
 554        qtd->qtd_dma = dma;
 555        qtd->hw_token = cpu_to_le32(QTD_STS_HALT);
 556        qtd->hw_next = EHCI_LIST_END;
 557        qtd->hw_alt_next = EHCI_LIST_END;
 558        INIT_LIST_HEAD(&qtd->qtd_list);
 559}
 560
 561static inline void oxu_qtd_free(struct oxu_hcd *oxu, struct ehci_qtd *qtd)
 562{
 563        int index;
 564
 565        if (qtd->buffer)
 566                oxu_buf_free(oxu, qtd);
 567
 568        spin_lock(&oxu->mem_lock);
 569
 570        index = qtd - &oxu->mem->qtd_pool[0];
 571        oxu->qtd_used[index] = 0;
 572
 573        spin_unlock(&oxu->mem_lock);
 574}
 575
 576static struct ehci_qtd *ehci_qtd_alloc(struct oxu_hcd *oxu)
 577{
 578        int i;
 579        struct ehci_qtd *qtd = NULL;
 580
 581        spin_lock(&oxu->mem_lock);
 582
 583        for (i = 0; i < QTD_NUM; i++)
 584                if (!oxu->qtd_used[i])
 585                        break;
 586
 587        if (i < QTD_NUM) {
 588                qtd = (struct ehci_qtd *) &oxu->mem->qtd_pool[i];
 589                memset(qtd, 0, sizeof *qtd);
 590
 591                qtd->hw_token = cpu_to_le32(QTD_STS_HALT);
 592                qtd->hw_next = EHCI_LIST_END;
 593                qtd->hw_alt_next = EHCI_LIST_END;
 594                INIT_LIST_HEAD(&qtd->qtd_list);
 595
 596                qtd->qtd_dma = virt_to_phys(qtd);
 597
 598                oxu->qtd_used[i] = 1;
 599        }
 600
 601        spin_unlock(&oxu->mem_lock);
 602
 603        return qtd;
 604}
 605
 606static void oxu_qh_free(struct oxu_hcd *oxu, struct ehci_qh *qh)
 607{
 608        int index;
 609
 610        spin_lock(&oxu->mem_lock);
 611
 612        index = qh - &oxu->mem->qh_pool[0];
 613        oxu->qh_used[index] = 0;
 614
 615        spin_unlock(&oxu->mem_lock);
 616}
 617
 618static void qh_destroy(struct kref *kref)
 619{
 620        struct ehci_qh *qh = container_of(kref, struct ehci_qh, kref);
 621        struct oxu_hcd *oxu = qh->oxu;
 622
 623        /* clean qtds first, and know this is not linked */
 624        if (!list_empty(&qh->qtd_list) || qh->qh_next.ptr) {
 625                oxu_dbg(oxu, "unused qh not empty!\n");
 626                BUG();
 627        }
 628        if (qh->dummy)
 629                oxu_qtd_free(oxu, qh->dummy);
 630        oxu_qh_free(oxu, qh);
 631}
 632
 633static struct ehci_qh *oxu_qh_alloc(struct oxu_hcd *oxu)
 634{
 635        int i;
 636        struct ehci_qh *qh = NULL;
 637
 638        spin_lock(&oxu->mem_lock);
 639
 640        for (i = 0; i < QHEAD_NUM; i++)
 641                if (!oxu->qh_used[i])
 642                        break;
 643
 644        if (i < QHEAD_NUM) {
 645                qh = (struct ehci_qh *) &oxu->mem->qh_pool[i];
 646                memset(qh, 0, sizeof *qh);
 647
 648                kref_init(&qh->kref);
 649                qh->oxu = oxu;
 650                qh->qh_dma = virt_to_phys(qh);
 651                INIT_LIST_HEAD(&qh->qtd_list);
 652
 653                /* dummy td enables safe urb queuing */
 654                qh->dummy = ehci_qtd_alloc(oxu);
 655                if (qh->dummy == NULL) {
 656                        oxu_dbg(oxu, "no dummy td\n");
 657                        oxu->qh_used[i] = 0;
 658                        qh = NULL;
 659                        goto unlock;
 660                }
 661
 662                oxu->qh_used[i] = 1;
 663        }
 664unlock:
 665        spin_unlock(&oxu->mem_lock);
 666
 667        return qh;
 668}
 669
 670/* to share a qh (cpu threads, or hc) */
 671static inline struct ehci_qh *qh_get(struct ehci_qh *qh)
 672{
 673        kref_get(&qh->kref);
 674        return qh;
 675}
 676
 677static inline void qh_put(struct ehci_qh *qh)
 678{
 679        kref_put(&qh->kref, qh_destroy);
 680}
 681
 682static void oxu_murb_free(struct oxu_hcd *oxu, struct oxu_murb *murb)
 683{
 684        int index;
 685
 686        spin_lock(&oxu->mem_lock);
 687
 688        index = murb - &oxu->murb_pool[0];
 689        oxu->murb_used[index] = 0;
 690
 691        spin_unlock(&oxu->mem_lock);
 692}
 693
 694static struct oxu_murb *oxu_murb_alloc(struct oxu_hcd *oxu)
 695
 696{
 697        int i;
 698        struct oxu_murb *murb = NULL;
 699
 700        spin_lock(&oxu->mem_lock);
 701
 702        for (i = 0; i < MURB_NUM; i++)
 703                if (!oxu->murb_used[i])
 704                        break;
 705
 706        if (i < MURB_NUM) {
 707                murb = &(oxu->murb_pool)[i];
 708
 709                oxu->murb_used[i] = 1;
 710        }
 711
 712        spin_unlock(&oxu->mem_lock);
 713
 714        return murb;
 715}
 716
 717/* The queue heads and transfer descriptors are managed from pools tied
 718 * to each of the "per device" structures.
 719 * This is the initialisation and cleanup code.
 720 */
 721static void ehci_mem_cleanup(struct oxu_hcd *oxu)
 722{
 723        kfree(oxu->murb_pool);
 724        oxu->murb_pool = NULL;
 725
 726        if (oxu->async)
 727                qh_put(oxu->async);
 728        oxu->async = NULL;
 729
 730        del_timer(&oxu->urb_timer);
 731
 732        oxu->periodic = NULL;
 733
 734        /* shadow periodic table */
 735        kfree(oxu->pshadow);
 736        oxu->pshadow = NULL;
 737}
 738
 739/* Remember to add cleanup code (above) if you add anything here.
 740 */
 741static int ehci_mem_init(struct oxu_hcd *oxu, gfp_t flags)
 742{
 743        int i;
 744
 745        for (i = 0; i < oxu->periodic_size; i++)
 746                oxu->mem->frame_list[i] = EHCI_LIST_END;
 747        for (i = 0; i < QHEAD_NUM; i++)
 748                oxu->qh_used[i] = 0;
 749        for (i = 0; i < QTD_NUM; i++)
 750                oxu->qtd_used[i] = 0;
 751
 752        oxu->murb_pool = kcalloc(MURB_NUM, sizeof(struct oxu_murb), flags);
 753        if (!oxu->murb_pool)
 754                goto fail;
 755
 756        for (i = 0; i < MURB_NUM; i++)
 757                oxu->murb_used[i] = 0;
 758
 759        oxu->async = oxu_qh_alloc(oxu);
 760        if (!oxu->async)
 761                goto fail;
 762
 763        oxu->periodic = (__le32 *) &oxu->mem->frame_list;
 764        oxu->periodic_dma = virt_to_phys(oxu->periodic);
 765
 766        for (i = 0; i < oxu->periodic_size; i++)
 767                oxu->periodic[i] = EHCI_LIST_END;
 768
 769        /* software shadow of hardware table */
 770        oxu->pshadow = kcalloc(oxu->periodic_size, sizeof(void *), flags);
 771        if (oxu->pshadow != NULL)
 772                return 0;
 773
 774fail:
 775        oxu_dbg(oxu, "couldn't init memory\n");
 776        ehci_mem_cleanup(oxu);
 777        return -ENOMEM;
 778}
 779
 780/* Fill a qtd, returning how much of the buffer we were able to queue up.
 781 */
 782static int qtd_fill(struct ehci_qtd *qtd, dma_addr_t buf, size_t len,
 783                                int token, int maxpacket)
 784{
 785        int i, count;
 786        u64 addr = buf;
 787
 788        /* one buffer entry per 4K ... first might be short or unaligned */
 789        qtd->hw_buf[0] = cpu_to_le32((u32)addr);
 790        qtd->hw_buf_hi[0] = cpu_to_le32((u32)(addr >> 32));
 791        count = 0x1000 - (buf & 0x0fff);        /* rest of that page */
 792        if (likely(len < count))                /* ... iff needed */
 793                count = len;
 794        else {
 795                buf +=  0x1000;
 796                buf &= ~0x0fff;
 797
 798                /* per-qtd limit: from 16K to 20K (best alignment) */
 799                for (i = 1; count < len && i < 5; i++) {
 800                        addr = buf;
 801                        qtd->hw_buf[i] = cpu_to_le32((u32)addr);
 802                        qtd->hw_buf_hi[i] = cpu_to_le32((u32)(addr >> 32));
 803                        buf += 0x1000;
 804                        if ((count + 0x1000) < len)
 805                                count += 0x1000;
 806                        else
 807                                count = len;
 808                }
 809
 810                /* short packets may only terminate transfers */
 811                if (count != len)
 812                        count -= (count % maxpacket);
 813        }
 814        qtd->hw_token = cpu_to_le32((count << 16) | token);
 815        qtd->length = count;
 816
 817        return count;
 818}
 819
 820static inline void qh_update(struct oxu_hcd *oxu,
 821                                struct ehci_qh *qh, struct ehci_qtd *qtd)
 822{
 823        /* writes to an active overlay are unsafe */
 824        BUG_ON(qh->qh_state != QH_STATE_IDLE);
 825
 826        qh->hw_qtd_next = QTD_NEXT(qtd->qtd_dma);
 827        qh->hw_alt_next = EHCI_LIST_END;
 828
 829        /* Except for control endpoints, we make hardware maintain data
 830         * toggle (like OHCI) ... here (re)initialize the toggle in the QH,
 831         * and set the pseudo-toggle in udev. Only usb_clear_halt() will
 832         * ever clear it.
 833         */
 834        if (!(qh->hw_info1 & cpu_to_le32(1 << 14))) {
 835                unsigned        is_out, epnum;
 836
 837                is_out = !(qtd->hw_token & cpu_to_le32(1 << 8));
 838                epnum = (le32_to_cpup(&qh->hw_info1) >> 8) & 0x0f;
 839                if (unlikely(!usb_gettoggle(qh->dev, epnum, is_out))) {
 840                        qh->hw_token &= ~cpu_to_le32(QTD_TOGGLE);
 841                        usb_settoggle(qh->dev, epnum, is_out, 1);
 842                }
 843        }
 844
 845        /* HC must see latest qtd and qh data before we clear ACTIVE+HALT */
 846        wmb();
 847        qh->hw_token &= cpu_to_le32(QTD_TOGGLE | QTD_STS_PING);
 848}
 849
 850/* If it weren't for a common silicon quirk (writing the dummy into the qh
 851 * overlay, so qh->hw_token wrongly becomes inactive/halted), only fault
 852 * recovery (including urb dequeue) would need software changes to a QH...
 853 */
 854static void qh_refresh(struct oxu_hcd *oxu, struct ehci_qh *qh)
 855{
 856        struct ehci_qtd *qtd;
 857
 858        if (list_empty(&qh->qtd_list))
 859                qtd = qh->dummy;
 860        else {
 861                qtd = list_entry(qh->qtd_list.next,
 862                                struct ehci_qtd, qtd_list);
 863                /* first qtd may already be partially processed */
 864                if (cpu_to_le32(qtd->qtd_dma) == qh->hw_current)
 865                        qtd = NULL;
 866        }
 867
 868        if (qtd)
 869                qh_update(oxu, qh, qtd);
 870}
 871
 872static void qtd_copy_status(struct oxu_hcd *oxu, struct urb *urb,
 873                                size_t length, u32 token)
 874{
 875        /* count IN/OUT bytes, not SETUP (even short packets) */
 876        if (likely(QTD_PID(token) != 2))
 877                urb->actual_length += length - QTD_LENGTH(token);
 878
 879        /* don't modify error codes */
 880        if (unlikely(urb->status != -EINPROGRESS))
 881                return;
 882
 883        /* force cleanup after short read; not always an error */
 884        if (unlikely(IS_SHORT_READ(token)))
 885                urb->status = -EREMOTEIO;
 886
 887        /* serious "can't proceed" faults reported by the hardware */
 888        if (token & QTD_STS_HALT) {
 889                if (token & QTD_STS_BABBLE) {
 890                        /* FIXME "must" disable babbling device's port too */
 891                        urb->status = -EOVERFLOW;
 892                } else if (token & QTD_STS_MMF) {
 893                        /* fs/ls interrupt xfer missed the complete-split */
 894                        urb->status = -EPROTO;
 895                } else if (token & QTD_STS_DBE) {
 896                        urb->status = (QTD_PID(token) == 1) /* IN ? */
 897                                ? -ENOSR  /* hc couldn't read data */
 898                                : -ECOMM; /* hc couldn't write data */
 899                } else if (token & QTD_STS_XACT) {
 900                        /* timeout, bad crc, wrong PID, etc; retried */
 901                        if (QTD_CERR(token))
 902                                urb->status = -EPIPE;
 903                        else {
 904                                oxu_dbg(oxu, "devpath %s ep%d%s 3strikes\n",
 905                                        urb->dev->devpath,
 906                                        usb_pipeendpoint(urb->pipe),
 907                                        usb_pipein(urb->pipe) ? "in" : "out");
 908                                urb->status = -EPROTO;
 909                        }
 910                /* CERR nonzero + no errors + halt --> stall */
 911                } else if (QTD_CERR(token))
 912                        urb->status = -EPIPE;
 913                else    /* unknown */
 914                        urb->status = -EPROTO;
 915
 916                oxu_vdbg(oxu, "dev%d ep%d%s qtd token %08x --> status %d\n",
 917                        usb_pipedevice(urb->pipe),
 918                        usb_pipeendpoint(urb->pipe),
 919                        usb_pipein(urb->pipe) ? "in" : "out",
 920                        token, urb->status);
 921        }
 922}
 923
 924static void ehci_urb_done(struct oxu_hcd *oxu, struct urb *urb)
 925__releases(oxu->lock)
 926__acquires(oxu->lock)
 927{
 928        if (likely(urb->hcpriv != NULL)) {
 929                struct ehci_qh  *qh = (struct ehci_qh *) urb->hcpriv;
 930
 931                /* S-mask in a QH means it's an interrupt urb */
 932                if ((qh->hw_info2 & cpu_to_le32(QH_SMASK)) != 0) {
 933
 934                        /* ... update hc-wide periodic stats (for usbfs) */
 935                        oxu_to_hcd(oxu)->self.bandwidth_int_reqs--;
 936                }
 937                qh_put(qh);
 938        }
 939
 940        urb->hcpriv = NULL;
 941        switch (urb->status) {
 942        case -EINPROGRESS:              /* success */
 943                urb->status = 0;
 944        default:                        /* fault */
 945                break;
 946        case -EREMOTEIO:                /* fault or normal */
 947                if (!(urb->transfer_flags & URB_SHORT_NOT_OK))
 948                        urb->status = 0;
 949                break;
 950        case -ECONNRESET:               /* canceled */
 951        case -ENOENT:
 952                break;
 953        }
 954
 955#ifdef OXU_URB_TRACE
 956        oxu_dbg(oxu, "%s %s urb %p ep%d%s status %d len %d/%d\n",
 957                __func__, urb->dev->devpath, urb,
 958                usb_pipeendpoint(urb->pipe),
 959                usb_pipein(urb->pipe) ? "in" : "out",
 960                urb->status,
 961                urb->actual_length, urb->transfer_buffer_length);
 962#endif
 963
 964        /* complete() can reenter this HCD */
 965        spin_unlock(&oxu->lock);
 966        usb_hcd_giveback_urb(oxu_to_hcd(oxu), urb, urb->status);
 967        spin_lock(&oxu->lock);
 968}
 969
 970static void start_unlink_async(struct oxu_hcd *oxu, struct ehci_qh *qh);
 971static void unlink_async(struct oxu_hcd *oxu, struct ehci_qh *qh);
 972
 973static void intr_deschedule(struct oxu_hcd *oxu, struct ehci_qh *qh);
 974static int qh_schedule(struct oxu_hcd *oxu, struct ehci_qh *qh);
 975
 976#define HALT_BIT cpu_to_le32(QTD_STS_HALT)
 977
 978/* Process and free completed qtds for a qh, returning URBs to drivers.
 979 * Chases up to qh->hw_current.  Returns number of completions called,
 980 * indicating how much "real" work we did.
 981 */
 982static unsigned qh_completions(struct oxu_hcd *oxu, struct ehci_qh *qh)
 983{
 984        struct ehci_qtd *last = NULL, *end = qh->dummy;
 985        struct list_head *entry, *tmp;
 986        int stopped;
 987        unsigned count = 0;
 988        int do_status = 0;
 989        u8 state;
 990        struct oxu_murb *murb = NULL;
 991
 992        if (unlikely(list_empty(&qh->qtd_list)))
 993                return count;
 994
 995        /* completions (or tasks on other cpus) must never clobber HALT
 996         * till we've gone through and cleaned everything up, even when
 997         * they add urbs to this qh's queue or mark them for unlinking.
 998         *
 999         * NOTE:  unlinking expects to be done in queue order.
1000         */
1001        state = qh->qh_state;
1002        qh->qh_state = QH_STATE_COMPLETING;
1003        stopped = (state == QH_STATE_IDLE);
1004
1005        /* remove de-activated QTDs from front of queue.
1006         * after faults (including short reads), cleanup this urb
1007         * then let the queue advance.
1008         * if queue is stopped, handles unlinks.
1009         */
1010        list_for_each_safe(entry, tmp, &qh->qtd_list) {
1011                struct ehci_qtd *qtd;
1012                struct urb *urb;
1013                u32 token = 0;
1014
1015                qtd = list_entry(entry, struct ehci_qtd, qtd_list);
1016                urb = qtd->urb;
1017
1018                /* Clean up any state from previous QTD ...*/
1019                if (last) {
1020                        if (likely(last->urb != urb)) {
1021                                if (last->urb->complete == NULL) {
1022                                        murb = (struct oxu_murb *) last->urb;
1023                                        last->urb = murb->main;
1024                                        if (murb->last) {
1025                                                ehci_urb_done(oxu, last->urb);
1026                                                count++;
1027                                        }
1028                                        oxu_murb_free(oxu, murb);
1029                                } else {
1030                                        ehci_urb_done(oxu, last->urb);
1031                                        count++;
1032                                }
1033                        }
1034                        oxu_qtd_free(oxu, last);
1035                        last = NULL;
1036                }
1037
1038                /* ignore urbs submitted during completions we reported */
1039                if (qtd == end)
1040                        break;
1041
1042                /* hardware copies qtd out of qh overlay */
1043                rmb();
1044                token = le32_to_cpu(qtd->hw_token);
1045
1046                /* always clean up qtds the hc de-activated */
1047                if ((token & QTD_STS_ACTIVE) == 0) {
1048
1049                        if ((token & QTD_STS_HALT) != 0) {
1050                                stopped = 1;
1051
1052                        /* magic dummy for some short reads; qh won't advance.
1053                         * that silicon quirk can kick in with this dummy too.
1054                         */
1055                        } else if (IS_SHORT_READ(token) &&
1056                                        !(qtd->hw_alt_next & EHCI_LIST_END)) {
1057                                stopped = 1;
1058                                goto halt;
1059                        }
1060
1061                /* stop scanning when we reach qtds the hc is using */
1062                } else if (likely(!stopped &&
1063                                HC_IS_RUNNING(oxu_to_hcd(oxu)->state))) {
1064                        break;
1065
1066                } else {
1067                        stopped = 1;
1068
1069                        if (unlikely(!HC_IS_RUNNING(oxu_to_hcd(oxu)->state)))
1070                                urb->status = -ESHUTDOWN;
1071
1072                        /* ignore active urbs unless some previous qtd
1073                         * for the urb faulted (including short read) or
1074                         * its urb was canceled.  we may patch qh or qtds.
1075                         */
1076                        if (likely(urb->status == -EINPROGRESS))
1077                                continue;
1078
1079                        /* issue status after short control reads */
1080                        if (unlikely(do_status != 0)
1081                                        && QTD_PID(token) == 0 /* OUT */) {
1082                                do_status = 0;
1083                                continue;
1084                        }
1085
1086                        /* token in overlay may be most current */
1087                        if (state == QH_STATE_IDLE
1088                                        && cpu_to_le32(qtd->qtd_dma)
1089                                                == qh->hw_current)
1090                                token = le32_to_cpu(qh->hw_token);
1091
1092                        /* force halt for unlinked or blocked qh, so we'll
1093                         * patch the qh later and so that completions can't
1094                         * activate it while we "know" it's stopped.
1095                         */
1096                        if ((HALT_BIT & qh->hw_token) == 0) {
1097halt:
1098                                qh->hw_token |= HALT_BIT;
1099                                wmb();
1100                        }
1101                }
1102
1103                /* Remove it from the queue */
1104                qtd_copy_status(oxu, urb->complete ?
1105                                        urb : ((struct oxu_murb *) urb)->main,
1106                                qtd->length, token);
1107                if ((usb_pipein(qtd->urb->pipe)) &&
1108                                (NULL != qtd->transfer_buffer))
1109                        memcpy(qtd->transfer_buffer, qtd->buffer, qtd->length);
1110                do_status = (urb->status == -EREMOTEIO)
1111                                && usb_pipecontrol(urb->pipe);
1112
1113                if (stopped && qtd->qtd_list.prev != &qh->qtd_list) {
1114                        last = list_entry(qtd->qtd_list.prev,
1115                                        struct ehci_qtd, qtd_list);
1116                        last->hw_next = qtd->hw_next;
1117                }
1118                list_del(&qtd->qtd_list);
1119                last = qtd;
1120        }
1121
1122        /* last urb's completion might still need calling */
1123        if (likely(last != NULL)) {
1124                if (last->urb->complete == NULL) {
1125                        murb = (struct oxu_murb *) last->urb;
1126                        last->urb = murb->main;
1127                        if (murb->last) {
1128                                ehci_urb_done(oxu, last->urb);
1129                                count++;
1130                        }
1131                        oxu_murb_free(oxu, murb);
1132                } else {
1133                        ehci_urb_done(oxu, last->urb);
1134                        count++;
1135                }
1136                oxu_qtd_free(oxu, last);
1137        }
1138
1139        /* restore original state; caller must unlink or relink */
1140        qh->qh_state = state;
1141
1142        /* be sure the hardware's done with the qh before refreshing
1143         * it after fault cleanup, or recovering from silicon wrongly
1144         * overlaying the dummy qtd (which reduces DMA chatter).
1145         */
1146        if (stopped != 0 || qh->hw_qtd_next == EHCI_LIST_END) {
1147                switch (state) {
1148                case QH_STATE_IDLE:
1149                        qh_refresh(oxu, qh);
1150                        break;
1151                case QH_STATE_LINKED:
1152                        /* should be rare for periodic transfers,
1153                         * except maybe high bandwidth ...
1154                         */
1155                        if ((cpu_to_le32(QH_SMASK)
1156                                        & qh->hw_info2) != 0) {
1157                                intr_deschedule(oxu, qh);
1158                                (void) qh_schedule(oxu, qh);
1159                        } else
1160                                unlink_async(oxu, qh);
1161                        break;
1162                /* otherwise, unlink already started */
1163                }
1164        }
1165
1166        return count;
1167}
1168
1169/* High bandwidth multiplier, as encoded in highspeed endpoint descriptors */
1170#define hb_mult(wMaxPacketSize)         (1 + (((wMaxPacketSize) >> 11) & 0x03))
1171/* ... and packet size, for any kind of endpoint descriptor */
1172#define max_packet(wMaxPacketSize)      ((wMaxPacketSize) & 0x07ff)
1173
1174/* Reverse of qh_urb_transaction: free a list of TDs.
1175 * used for cleanup after errors, before HC sees an URB's TDs.
1176 */
1177static void qtd_list_free(struct oxu_hcd *oxu,
1178                                struct urb *urb, struct list_head *qtd_list)
1179{
1180        struct list_head *entry, *temp;
1181
1182        list_for_each_safe(entry, temp, qtd_list) {
1183                struct ehci_qtd *qtd;
1184
1185                qtd = list_entry(entry, struct ehci_qtd, qtd_list);
1186                list_del(&qtd->qtd_list);
1187                oxu_qtd_free(oxu, qtd);
1188        }
1189}
1190
1191/* Create a list of filled qtds for this URB; won't link into qh.
1192 */
1193static struct list_head *qh_urb_transaction(struct oxu_hcd *oxu,
1194                                                struct urb *urb,
1195                                                struct list_head *head,
1196                                                gfp_t flags)
1197{
1198        struct ehci_qtd *qtd, *qtd_prev;
1199        dma_addr_t buf;
1200        int len, maxpacket;
1201        int is_input;
1202        u32 token;
1203        void *transfer_buf = NULL;
1204        int ret;
1205
1206        /*
1207         * URBs map to sequences of QTDs: one logical transaction
1208         */
1209        qtd = ehci_qtd_alloc(oxu);
1210        if (unlikely(!qtd))
1211                return NULL;
1212        list_add_tail(&qtd->qtd_list, head);
1213        qtd->urb = urb;
1214
1215        token = QTD_STS_ACTIVE;
1216        token |= (EHCI_TUNE_CERR << 10);
1217        /* for split transactions, SplitXState initialized to zero */
1218
1219        len = urb->transfer_buffer_length;
1220        is_input = usb_pipein(urb->pipe);
1221        if (!urb->transfer_buffer && urb->transfer_buffer_length && is_input)
1222                urb->transfer_buffer = phys_to_virt(urb->transfer_dma);
1223
1224        if (usb_pipecontrol(urb->pipe)) {
1225                /* SETUP pid */
1226                ret = oxu_buf_alloc(oxu, qtd, sizeof(struct usb_ctrlrequest));
1227                if (ret)
1228                        goto cleanup;
1229
1230                qtd_fill(qtd, qtd->buffer_dma, sizeof(struct usb_ctrlrequest),
1231                                token | (2 /* "setup" */ << 8), 8);
1232                memcpy(qtd->buffer, qtd->urb->setup_packet,
1233                                sizeof(struct usb_ctrlrequest));
1234
1235                /* ... and always at least one more pid */
1236                token ^= QTD_TOGGLE;
1237                qtd_prev = qtd;
1238                qtd = ehci_qtd_alloc(oxu);
1239                if (unlikely(!qtd))
1240                        goto cleanup;
1241                qtd->urb = urb;
1242                qtd_prev->hw_next = QTD_NEXT(qtd->qtd_dma);
1243                list_add_tail(&qtd->qtd_list, head);
1244
1245                /* for zero length DATA stages, STATUS is always IN */
1246                if (len == 0)
1247                        token |= (1 /* "in" */ << 8);
1248        }
1249
1250        /*
1251         * Data transfer stage: buffer setup
1252         */
1253
1254        ret = oxu_buf_alloc(oxu, qtd, len);
1255        if (ret)
1256                goto cleanup;
1257
1258        buf = qtd->buffer_dma;
1259        transfer_buf = urb->transfer_buffer;
1260
1261        if (!is_input)
1262                memcpy(qtd->buffer, qtd->urb->transfer_buffer, len);
1263
1264        if (is_input)
1265                token |= (1 /* "in" */ << 8);
1266        /* else it's already initted to "out" pid (0 << 8) */
1267
1268        maxpacket = max_packet(usb_maxpacket(urb->dev, urb->pipe, !is_input));
1269
1270        /*
1271         * buffer gets wrapped in one or more qtds;
1272         * last one may be "short" (including zero len)
1273         * and may serve as a control status ack
1274         */
1275        for (;;) {
1276                int this_qtd_len;
1277
1278                this_qtd_len = qtd_fill(qtd, buf, len, token, maxpacket);
1279                qtd->transfer_buffer = transfer_buf;
1280                len -= this_qtd_len;
1281                buf += this_qtd_len;
1282                transfer_buf += this_qtd_len;
1283                if (is_input)
1284                        qtd->hw_alt_next = oxu->async->hw_alt_next;
1285
1286                /* qh makes control packets use qtd toggle; maybe switch it */
1287                if ((maxpacket & (this_qtd_len + (maxpacket - 1))) == 0)
1288                        token ^= QTD_TOGGLE;
1289
1290                if (likely(len <= 0))
1291                        break;
1292
1293                qtd_prev = qtd;
1294                qtd = ehci_qtd_alloc(oxu);
1295                if (unlikely(!qtd))
1296                        goto cleanup;
1297                if (likely(len > 0)) {
1298                        ret = oxu_buf_alloc(oxu, qtd, len);
1299                        if (ret)
1300                                goto cleanup;
1301                }
1302                qtd->urb = urb;
1303                qtd_prev->hw_next = QTD_NEXT(qtd->qtd_dma);
1304                list_add_tail(&qtd->qtd_list, head);
1305        }
1306
1307        /* unless the bulk/interrupt caller wants a chance to clean
1308         * up after short reads, hc should advance qh past this urb
1309         */
1310        if (likely((urb->transfer_flags & URB_SHORT_NOT_OK) == 0
1311                                || usb_pipecontrol(urb->pipe)))
1312                qtd->hw_alt_next = EHCI_LIST_END;
1313
1314        /*
1315         * control requests may need a terminating data "status" ack;
1316         * bulk ones may need a terminating short packet (zero length).
1317         */
1318        if (likely(urb->transfer_buffer_length != 0)) {
1319                int     one_more = 0;
1320
1321                if (usb_pipecontrol(urb->pipe)) {
1322                        one_more = 1;
1323                        token ^= 0x0100;        /* "in" <--> "out"  */
1324                        token |= QTD_TOGGLE;    /* force DATA1 */
1325                } else if (usb_pipebulk(urb->pipe)
1326                                && (urb->transfer_flags & URB_ZERO_PACKET)
1327                                && !(urb->transfer_buffer_length % maxpacket)) {
1328                        one_more = 1;
1329                }
1330                if (one_more) {
1331                        qtd_prev = qtd;
1332                        qtd = ehci_qtd_alloc(oxu);
1333                        if (unlikely(!qtd))
1334                                goto cleanup;
1335                        qtd->urb = urb;
1336                        qtd_prev->hw_next = QTD_NEXT(qtd->qtd_dma);
1337                        list_add_tail(&qtd->qtd_list, head);
1338
1339                        /* never any data in such packets */
1340                        qtd_fill(qtd, 0, 0, token, 0);
1341                }
1342        }
1343
1344        /* by default, enable interrupt on urb completion */
1345                qtd->hw_token |= cpu_to_le32(QTD_IOC);
1346        return head;
1347
1348cleanup:
1349        qtd_list_free(oxu, urb, head);
1350        return NULL;
1351}
1352
1353/* Each QH holds a qtd list; a QH is used for everything except iso.
1354 *
1355 * For interrupt urbs, the scheduler must set the microframe scheduling
1356 * mask(s) each time the QH gets scheduled.  For highspeed, that's
1357 * just one microframe in the s-mask.  For split interrupt transactions
1358 * there are additional complications: c-mask, maybe FSTNs.
1359 */
1360static struct ehci_qh *qh_make(struct oxu_hcd *oxu,
1361                                struct urb *urb, gfp_t flags)
1362{
1363        struct ehci_qh *qh = oxu_qh_alloc(oxu);
1364        u32 info1 = 0, info2 = 0;
1365        int is_input, type;
1366        int maxp = 0;
1367
1368        if (!qh)
1369                return qh;
1370
1371        /*
1372         * init endpoint/device data for this QH
1373         */
1374        info1 |= usb_pipeendpoint(urb->pipe) << 8;
1375        info1 |= usb_pipedevice(urb->pipe) << 0;
1376
1377        is_input = usb_pipein(urb->pipe);
1378        type = usb_pipetype(urb->pipe);
1379        maxp = usb_maxpacket(urb->dev, urb->pipe, !is_input);
1380
1381        /* Compute interrupt scheduling parameters just once, and save.
1382         * - allowing for high bandwidth, how many nsec/uframe are used?
1383         * - split transactions need a second CSPLIT uframe; same question
1384         * - splits also need a schedule gap (for full/low speed I/O)
1385         * - qh has a polling interval
1386         *
1387         * For control/bulk requests, the HC or TT handles these.
1388         */
1389        if (type == PIPE_INTERRUPT) {
1390                qh->usecs = NS_TO_US(usb_calc_bus_time(USB_SPEED_HIGH,
1391                                                                is_input, 0,
1392                                hb_mult(maxp) * max_packet(maxp)));
1393                qh->start = NO_FRAME;
1394
1395                if (urb->dev->speed == USB_SPEED_HIGH) {
1396                        qh->c_usecs = 0;
1397                        qh->gap_uf = 0;
1398
1399                        qh->period = urb->interval >> 3;
1400                        if (qh->period == 0 && urb->interval != 1) {
1401                                /* NOTE interval 2 or 4 uframes could work.
1402                                 * But interval 1 scheduling is simpler, and
1403                                 * includes high bandwidth.
1404                                 */
1405                                oxu_dbg(oxu, "intr period %d uframes, NYET!\n",
1406                                        urb->interval);
1407                                goto done;
1408                        }
1409                } else {
1410                        struct usb_tt   *tt = urb->dev->tt;
1411                        int             think_time;
1412
1413                        /* gap is f(FS/LS transfer times) */
1414                        qh->gap_uf = 1 + usb_calc_bus_time(urb->dev->speed,
1415                                        is_input, 0, maxp) / (125 * 1000);
1416
1417                        /* FIXME this just approximates SPLIT/CSPLIT times */
1418                        if (is_input) {         /* SPLIT, gap, CSPLIT+DATA */
1419                                qh->c_usecs = qh->usecs + HS_USECS(0);
1420                                qh->usecs = HS_USECS(1);
1421                        } else {                /* SPLIT+DATA, gap, CSPLIT */
1422                                qh->usecs += HS_USECS(1);
1423                                qh->c_usecs = HS_USECS(0);
1424                        }
1425
1426                        think_time = tt ? tt->think_time : 0;
1427                        qh->tt_usecs = NS_TO_US(think_time +
1428                                        usb_calc_bus_time(urb->dev->speed,
1429                                        is_input, 0, max_packet(maxp)));
1430                        qh->period = urb->interval;
1431                }
1432        }
1433
1434        /* support for tt scheduling, and access to toggles */
1435        qh->dev = urb->dev;
1436
1437        /* using TT? */
1438        switch (urb->dev->speed) {
1439        case USB_SPEED_LOW:
1440                info1 |= (1 << 12);     /* EPS "low" */
1441                /* FALL THROUGH */
1442
1443        case USB_SPEED_FULL:
1444                /* EPS 0 means "full" */
1445                if (type != PIPE_INTERRUPT)
1446                        info1 |= (EHCI_TUNE_RL_TT << 28);
1447                if (type == PIPE_CONTROL) {
1448                        info1 |= (1 << 27);     /* for TT */
1449                        info1 |= 1 << 14;       /* toggle from qtd */
1450                }
1451                info1 |= maxp << 16;
1452
1453                info2 |= (EHCI_TUNE_MULT_TT << 30);
1454                info2 |= urb->dev->ttport << 23;
1455
1456                /* NOTE:  if (PIPE_INTERRUPT) { scheduler sets c-mask } */
1457
1458                break;
1459
1460        case USB_SPEED_HIGH:            /* no TT involved */
1461                info1 |= (2 << 12);     /* EPS "high" */
1462                if (type == PIPE_CONTROL) {
1463                        info1 |= (EHCI_TUNE_RL_HS << 28);
1464                        info1 |= 64 << 16;      /* usb2 fixed maxpacket */
1465                        info1 |= 1 << 14;       /* toggle from qtd */
1466                        info2 |= (EHCI_TUNE_MULT_HS << 30);
1467                } else if (type == PIPE_BULK) {
1468                        info1 |= (EHCI_TUNE_RL_HS << 28);
1469                        info1 |= 512 << 16;     /* usb2 fixed maxpacket */
1470                        info2 |= (EHCI_TUNE_MULT_HS << 30);
1471                } else {                /* PIPE_INTERRUPT */
1472                        info1 |= max_packet(maxp) << 16;
1473                        info2 |= hb_mult(maxp) << 30;
1474                }
1475                break;
1476        default:
1477                oxu_dbg(oxu, "bogus dev %p speed %d\n", urb->dev, urb->dev->speed);
1478done:
1479                qh_put(qh);
1480                return NULL;
1481        }
1482
1483        /* NOTE:  if (PIPE_INTERRUPT) { scheduler sets s-mask } */
1484
1485        /* init as live, toggle clear, advance to dummy */
1486        qh->qh_state = QH_STATE_IDLE;
1487        qh->hw_info1 = cpu_to_le32(info1);
1488        qh->hw_info2 = cpu_to_le32(info2);
1489        usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe), !is_input, 1);
1490        qh_refresh(oxu, qh);
1491        return qh;
1492}
1493
1494/* Move qh (and its qtds) onto async queue; maybe enable queue.
1495 */
1496static void qh_link_async(struct oxu_hcd *oxu, struct ehci_qh *qh)
1497{
1498        __le32 dma = QH_NEXT(qh->qh_dma);
1499        struct ehci_qh *head;
1500
1501        /* (re)start the async schedule? */
1502        head = oxu->async;
1503        timer_action_done(oxu, TIMER_ASYNC_OFF);
1504        if (!head->qh_next.qh) {
1505                u32     cmd = readl(&oxu->regs->command);
1506
1507                if (!(cmd & CMD_ASE)) {
1508                        /* in case a clear of CMD_ASE didn't take yet */
1509                        (void)handshake(oxu, &oxu->regs->status,
1510                                        STS_ASS, 0, 150);
1511                        cmd |= CMD_ASE | CMD_RUN;
1512                        writel(cmd, &oxu->regs->command);
1513                        oxu_to_hcd(oxu)->state = HC_STATE_RUNNING;
1514                        /* posted write need not be known to HC yet ... */
1515                }
1516        }
1517
1518        /* clear halt and/or toggle; and maybe recover from silicon quirk */
1519        if (qh->qh_state == QH_STATE_IDLE)
1520                qh_refresh(oxu, qh);
1521
1522        /* splice right after start */
1523        qh->qh_next = head->qh_next;
1524        qh->hw_next = head->hw_next;
1525        wmb();
1526
1527        head->qh_next.qh = qh;
1528        head->hw_next = dma;
1529
1530        qh->qh_state = QH_STATE_LINKED;
1531        /* qtd completions reported later by interrupt */
1532}
1533
1534#define QH_ADDR_MASK    cpu_to_le32(0x7f)
1535
1536/*
1537 * For control/bulk/interrupt, return QH with these TDs appended.
1538 * Allocates and initializes the QH if necessary.
1539 * Returns null if it can't allocate a QH it needs to.
1540 * If the QH has TDs (urbs) already, that's great.
1541 */
1542static struct ehci_qh *qh_append_tds(struct oxu_hcd *oxu,
1543                                struct urb *urb, struct list_head *qtd_list,
1544                                int epnum, void **ptr)
1545{
1546        struct ehci_qh *qh = NULL;
1547
1548        qh = (struct ehci_qh *) *ptr;
1549        if (unlikely(qh == NULL)) {
1550                /* can't sleep here, we have oxu->lock... */
1551                qh = qh_make(oxu, urb, GFP_ATOMIC);
1552                *ptr = qh;
1553        }
1554        if (likely(qh != NULL)) {
1555                struct ehci_qtd *qtd;
1556
1557                if (unlikely(list_empty(qtd_list)))
1558                        qtd = NULL;
1559                else
1560                        qtd = list_entry(qtd_list->next, struct ehci_qtd,
1561                                        qtd_list);
1562
1563                /* control qh may need patching ... */
1564                if (unlikely(epnum == 0)) {
1565
1566                        /* usb_reset_device() briefly reverts to address 0 */
1567                        if (usb_pipedevice(urb->pipe) == 0)
1568                                qh->hw_info1 &= ~QH_ADDR_MASK;
1569                }
1570
1571                /* just one way to queue requests: swap with the dummy qtd.
1572                 * only hc or qh_refresh() ever modify the overlay.
1573                 */
1574                if (likely(qtd != NULL)) {
1575                        struct ehci_qtd *dummy;
1576                        dma_addr_t dma;
1577                        __le32 token;
1578
1579                        /* to avoid racing the HC, use the dummy td instead of
1580                         * the first td of our list (becomes new dummy).  both
1581                         * tds stay deactivated until we're done, when the
1582                         * HC is allowed to fetch the old dummy (4.10.2).
1583                         */
1584                        token = qtd->hw_token;
1585                        qtd->hw_token = HALT_BIT;
1586                        wmb();
1587                        dummy = qh->dummy;
1588
1589                        dma = dummy->qtd_dma;
1590                        *dummy = *qtd;
1591                        dummy->qtd_dma = dma;
1592
1593                        list_del(&qtd->qtd_list);
1594                        list_add(&dummy->qtd_list, qtd_list);
1595                        list_splice(qtd_list, qh->qtd_list.prev);
1596
1597                        ehci_qtd_init(qtd, qtd->qtd_dma);
1598                        qh->dummy = qtd;
1599
1600                        /* hc must see the new dummy at list end */
1601                        dma = qtd->qtd_dma;
1602                        qtd = list_entry(qh->qtd_list.prev,
1603                                        struct ehci_qtd, qtd_list);
1604                        qtd->hw_next = QTD_NEXT(dma);
1605
1606                        /* let the hc process these next qtds */
1607                        dummy->hw_token = (token & ~(0x80));
1608                        wmb();
1609                        dummy->hw_token = token;
1610
1611                        urb->hcpriv = qh_get(qh);
1612                }
1613        }
1614        return qh;
1615}
1616
1617static int submit_async(struct oxu_hcd  *oxu, struct urb *urb,
1618                        struct list_head *qtd_list, gfp_t mem_flags)
1619{
1620        struct ehci_qtd *qtd;
1621        int epnum;
1622        unsigned long flags;
1623        struct ehci_qh *qh = NULL;
1624        int rc = 0;
1625
1626        qtd = list_entry(qtd_list->next, struct ehci_qtd, qtd_list);
1627        epnum = urb->ep->desc.bEndpointAddress;
1628
1629#ifdef OXU_URB_TRACE
1630        oxu_dbg(oxu, "%s %s urb %p ep%d%s len %d, qtd %p [qh %p]\n",
1631                __func__, urb->dev->devpath, urb,
1632                epnum & 0x0f, (epnum & USB_DIR_IN) ? "in" : "out",
1633                urb->transfer_buffer_length,
1634                qtd, urb->ep->hcpriv);
1635#endif
1636
1637        spin_lock_irqsave(&oxu->lock, flags);
1638        if (unlikely(!HCD_HW_ACCESSIBLE(oxu_to_hcd(oxu)))) {
1639                rc = -ESHUTDOWN;
1640                goto done;
1641        }
1642
1643        qh = qh_append_tds(oxu, urb, qtd_list, epnum, &urb->ep->hcpriv);
1644        if (unlikely(qh == NULL)) {
1645                rc = -ENOMEM;
1646                goto done;
1647        }
1648
1649        /* Control/bulk operations through TTs don't need scheduling,
1650         * the HC and TT handle it when the TT has a buffer ready.
1651         */
1652        if (likely(qh->qh_state == QH_STATE_IDLE))
1653                qh_link_async(oxu, qh_get(qh));
1654done:
1655        spin_unlock_irqrestore(&oxu->lock, flags);
1656        if (unlikely(qh == NULL))
1657                qtd_list_free(oxu, urb, qtd_list);
1658        return rc;
1659}
1660
1661/* The async qh for the qtds being reclaimed are now unlinked from the HC */
1662
1663static void end_unlink_async(struct oxu_hcd *oxu)
1664{
1665        struct ehci_qh *qh = oxu->reclaim;
1666        struct ehci_qh *next;
1667
1668        timer_action_done(oxu, TIMER_IAA_WATCHDOG);
1669
1670        qh->qh_state = QH_STATE_IDLE;
1671        qh->qh_next.qh = NULL;
1672        qh_put(qh);                     /* refcount from reclaim */
1673
1674        /* other unlink(s) may be pending (in QH_STATE_UNLINK_WAIT) */
1675        next = qh->reclaim;
1676        oxu->reclaim = next;
1677        oxu->reclaim_ready = 0;
1678        qh->reclaim = NULL;
1679
1680        qh_completions(oxu, qh);
1681
1682        if (!list_empty(&qh->qtd_list)
1683                        && HC_IS_RUNNING(oxu_to_hcd(oxu)->state))
1684                qh_link_async(oxu, qh);
1685        else {
1686                qh_put(qh);             /* refcount from async list */
1687
1688                /* it's not free to turn the async schedule on/off; leave it
1689                 * active but idle for a while once it empties.
1690                 */
1691                if (HC_IS_RUNNING(oxu_to_hcd(oxu)->state)
1692                                && oxu->async->qh_next.qh == NULL)
1693                        timer_action(oxu, TIMER_ASYNC_OFF);
1694        }
1695
1696        if (next) {
1697                oxu->reclaim = NULL;
1698                start_unlink_async(oxu, next);
1699        }
1700}
1701
1702/* makes sure the async qh will become idle */
1703/* caller must own oxu->lock */
1704
1705static void start_unlink_async(struct oxu_hcd *oxu, struct ehci_qh *qh)
1706{
1707        int cmd = readl(&oxu->regs->command);
1708        struct ehci_qh *prev;
1709
1710#ifdef DEBUG
1711        assert_spin_locked(&oxu->lock);
1712        if (oxu->reclaim || (qh->qh_state != QH_STATE_LINKED
1713                                && qh->qh_state != QH_STATE_UNLINK_WAIT))
1714                BUG();
1715#endif
1716
1717        /* stop async schedule right now? */
1718        if (unlikely(qh == oxu->async)) {
1719                /* can't get here without STS_ASS set */
1720                if (oxu_to_hcd(oxu)->state != HC_STATE_HALT
1721                                && !oxu->reclaim) {
1722                        /* ... and CMD_IAAD clear */
1723                        writel(cmd & ~CMD_ASE, &oxu->regs->command);
1724                        wmb();
1725                        /* handshake later, if we need to */
1726                        timer_action_done(oxu, TIMER_ASYNC_OFF);
1727                }
1728                return;
1729        }
1730
1731        qh->qh_state = QH_STATE_UNLINK;
1732        oxu->reclaim = qh = qh_get(qh);
1733
1734        prev = oxu->async;
1735        while (prev->qh_next.qh != qh)
1736                prev = prev->qh_next.qh;
1737
1738        prev->hw_next = qh->hw_next;
1739        prev->qh_next = qh->qh_next;
1740        wmb();
1741
1742        if (unlikely(oxu_to_hcd(oxu)->state == HC_STATE_HALT)) {
1743                /* if (unlikely(qh->reclaim != 0))
1744                 *      this will recurse, probably not much
1745                 */
1746                end_unlink_async(oxu);
1747                return;
1748        }
1749
1750        oxu->reclaim_ready = 0;
1751        cmd |= CMD_IAAD;
1752        writel(cmd, &oxu->regs->command);
1753        (void) readl(&oxu->regs->command);
1754        timer_action(oxu, TIMER_IAA_WATCHDOG);
1755}
1756
1757static void scan_async(struct oxu_hcd *oxu)
1758{
1759        struct ehci_qh *qh;
1760        enum ehci_timer_action action = TIMER_IO_WATCHDOG;
1761
1762        if (!++(oxu->stamp))
1763                oxu->stamp++;
1764        timer_action_done(oxu, TIMER_ASYNC_SHRINK);
1765rescan:
1766        qh = oxu->async->qh_next.qh;
1767        if (likely(qh != NULL)) {
1768                do {
1769                        /* clean any finished work for this qh */
1770                        if (!list_empty(&qh->qtd_list)
1771                                        && qh->stamp != oxu->stamp) {
1772                                int temp;
1773
1774                                /* unlinks could happen here; completion
1775                                 * reporting drops the lock.  rescan using
1776                                 * the latest schedule, but don't rescan
1777                                 * qhs we already finished (no looping).
1778                                 */
1779                                qh = qh_get(qh);
1780                                qh->stamp = oxu->stamp;
1781                                temp = qh_completions(oxu, qh);
1782                                qh_put(qh);
1783                                if (temp != 0)
1784                                        goto rescan;
1785                        }
1786
1787                        /* unlink idle entries, reducing HC PCI usage as well
1788                         * as HCD schedule-scanning costs.  delay for any qh
1789                         * we just scanned, there's a not-unusual case that it
1790                         * doesn't stay idle for long.
1791                         * (plus, avoids some kind of re-activation race.)
1792                         */
1793                        if (list_empty(&qh->qtd_list)) {
1794                                if (qh->stamp == oxu->stamp)
1795                                        action = TIMER_ASYNC_SHRINK;
1796                                else if (!oxu->reclaim
1797                                            && qh->qh_state == QH_STATE_LINKED)
1798                                        start_unlink_async(oxu, qh);
1799                        }
1800
1801                        qh = qh->qh_next.qh;
1802                } while (qh);
1803        }
1804        if (action == TIMER_ASYNC_SHRINK)
1805                timer_action(oxu, TIMER_ASYNC_SHRINK);
1806}
1807
1808/*
1809 * periodic_next_shadow - return "next" pointer on shadow list
1810 * @periodic: host pointer to qh/itd/sitd
1811 * @tag: hardware tag for type of this record
1812 */
1813static union ehci_shadow *periodic_next_shadow(union ehci_shadow *periodic,
1814                                                __le32 tag)
1815{
1816        switch (tag) {
1817        default:
1818        case Q_TYPE_QH:
1819                return &periodic->qh->qh_next;
1820        }
1821}
1822
1823/* caller must hold oxu->lock */
1824static void periodic_unlink(struct oxu_hcd *oxu, unsigned frame, void *ptr)
1825{
1826        union ehci_shadow *prev_p = &oxu->pshadow[frame];
1827        __le32 *hw_p = &oxu->periodic[frame];
1828        union ehci_shadow here = *prev_p;
1829
1830        /* find predecessor of "ptr"; hw and shadow lists are in sync */
1831        while (here.ptr && here.ptr != ptr) {
1832                prev_p = periodic_next_shadow(prev_p, Q_NEXT_TYPE(*hw_p));
1833                hw_p = here.hw_next;
1834                here = *prev_p;
1835        }
1836        /* an interrupt entry (at list end) could have been shared */
1837        if (!here.ptr)
1838                return;
1839
1840        /* update shadow and hardware lists ... the old "next" pointers
1841         * from ptr may still be in use, the caller updates them.
1842         */
1843        *prev_p = *periodic_next_shadow(&here, Q_NEXT_TYPE(*hw_p));
1844        *hw_p = *here.hw_next;
1845}
1846
1847/* how many of the uframe's 125 usecs are allocated? */
1848static unsigned short periodic_usecs(struct oxu_hcd *oxu,
1849                                        unsigned frame, unsigned uframe)
1850{
1851        __le32 *hw_p = &oxu->periodic[frame];
1852        union ehci_shadow *q = &oxu->pshadow[frame];
1853        unsigned usecs = 0;
1854
1855        while (q->ptr) {
1856                switch (Q_NEXT_TYPE(*hw_p)) {
1857                case Q_TYPE_QH:
1858                default:
1859                        /* is it in the S-mask? */
1860                        if (q->qh->hw_info2 & cpu_to_le32(1 << uframe))
1861                                usecs += q->qh->usecs;
1862                        /* ... or C-mask? */
1863                        if (q->qh->hw_info2 & cpu_to_le32(1 << (8 + uframe)))
1864                                usecs += q->qh->c_usecs;
1865                        hw_p = &q->qh->hw_next;
1866                        q = &q->qh->qh_next;
1867                        break;
1868                }
1869        }
1870#ifdef DEBUG
1871        if (usecs > 100)
1872                oxu_err(oxu, "uframe %d sched overrun: %d usecs\n",
1873                                                frame * 8 + uframe, usecs);
1874#endif
1875        return usecs;
1876}
1877
1878static int enable_periodic(struct oxu_hcd *oxu)
1879{
1880        u32 cmd;
1881        int status;
1882
1883        /* did clearing PSE did take effect yet?
1884         * takes effect only at frame boundaries...
1885         */
1886        status = handshake(oxu, &oxu->regs->status, STS_PSS, 0, 9 * 125);
1887        if (status != 0) {
1888                oxu_to_hcd(oxu)->state = HC_STATE_HALT;
1889                usb_hc_died(oxu_to_hcd(oxu));
1890                return status;
1891        }
1892
1893        cmd = readl(&oxu->regs->command) | CMD_PSE;
1894        writel(cmd, &oxu->regs->command);
1895        /* posted write ... PSS happens later */
1896        oxu_to_hcd(oxu)->state = HC_STATE_RUNNING;
1897
1898        /* make sure ehci_work scans these */
1899        oxu->next_uframe = readl(&oxu->regs->frame_index)
1900                % (oxu->periodic_size << 3);
1901        return 0;
1902}
1903
1904static int disable_periodic(struct oxu_hcd *oxu)
1905{
1906        u32 cmd;
1907        int status;
1908
1909        /* did setting PSE not take effect yet?
1910         * takes effect only at frame boundaries...
1911         */
1912        status = handshake(oxu, &oxu->regs->status, STS_PSS, STS_PSS, 9 * 125);
1913        if (status != 0) {
1914                oxu_to_hcd(oxu)->state = HC_STATE_HALT;
1915                usb_hc_died(oxu_to_hcd(oxu));
1916                return status;
1917        }
1918
1919        cmd = readl(&oxu->regs->command) & ~CMD_PSE;
1920        writel(cmd, &oxu->regs->command);
1921        /* posted write ... */
1922
1923        oxu->next_uframe = -1;
1924        return 0;
1925}
1926
1927/* periodic schedule slots have iso tds (normal or split) first, then a
1928 * sparse tree for active interrupt transfers.
1929 *
1930 * this just links in a qh; caller guarantees uframe masks are set right.
1931 * no FSTN support (yet; oxu 0.96+)
1932 */
1933static int qh_link_periodic(struct oxu_hcd *oxu, struct ehci_qh *qh)
1934{
1935        unsigned i;
1936        unsigned period = qh->period;
1937
1938        dev_dbg(&qh->dev->dev,
1939                "link qh%d-%04x/%p start %d [%d/%d us]\n",
1940                period, le32_to_cpup(&qh->hw_info2) & (QH_CMASK | QH_SMASK),
1941                qh, qh->start, qh->usecs, qh->c_usecs);
1942
1943        /* high bandwidth, or otherwise every microframe */
1944        if (period == 0)
1945                period = 1;
1946
1947        for (i = qh->start; i < oxu->periodic_size; i += period) {
1948                union ehci_shadow       *prev = &oxu->pshadow[i];
1949                __le32                  *hw_p = &oxu->periodic[i];
1950                union ehci_shadow       here = *prev;
1951                __le32                  type = 0;
1952
1953                /* skip the iso nodes at list head */
1954                while (here.ptr) {
1955                        type = Q_NEXT_TYPE(*hw_p);
1956                        if (type == Q_TYPE_QH)
1957                                break;
1958                        prev = periodic_next_shadow(prev, type);
1959                        hw_p = &here.qh->hw_next;
1960                        here = *prev;
1961                }
1962
1963                /* sorting each branch by period (slow-->fast)
1964                 * enables sharing interior tree nodes
1965                 */
1966                while (here.ptr && qh != here.qh) {
1967                        if (qh->period > here.qh->period)
1968                                break;
1969                        prev = &here.qh->qh_next;
1970                        hw_p = &here.qh->hw_next;
1971                        here = *prev;
1972                }
1973                /* link in this qh, unless some earlier pass did that */
1974                if (qh != here.qh) {
1975                        qh->qh_next = here;
1976                        if (here.qh)
1977                                qh->hw_next = *hw_p;
1978                        wmb();
1979                        prev->qh = qh;
1980                        *hw_p = QH_NEXT(qh->qh_dma);
1981                }
1982        }
1983        qh->qh_state = QH_STATE_LINKED;
1984        qh_get(qh);
1985
1986        /* update per-qh bandwidth for usbfs */
1987        oxu_to_hcd(oxu)->self.bandwidth_allocated += qh->period
1988                ? ((qh->usecs + qh->c_usecs) / qh->period)
1989                : (qh->usecs * 8);
1990
1991        /* maybe enable periodic schedule processing */
1992        if (!oxu->periodic_sched++)
1993                return enable_periodic(oxu);
1994
1995        return 0;
1996}
1997
1998static void qh_unlink_periodic(struct oxu_hcd *oxu, struct ehci_qh *qh)
1999{
2000        unsigned i;
2001        unsigned period;
2002
2003        /* FIXME:
2004         *   IF this isn't high speed
2005         *   and this qh is active in the current uframe
2006         *   (and overlay token SplitXstate is false?)
2007         * THEN
2008         *   qh->hw_info1 |= cpu_to_le32(1 << 7 "ignore");
2009         */
2010
2011        /* high bandwidth, or otherwise part of every microframe */
2012        period = qh->period;
2013        if (period == 0)
2014                period = 1;
2015
2016        for (i = qh->start; i < oxu->periodic_size; i += period)
2017                periodic_unlink(oxu, i, qh);
2018
2019        /* update per-qh bandwidth for usbfs */
2020        oxu_to_hcd(oxu)->self.bandwidth_allocated -= qh->period
2021                ? ((qh->usecs + qh->c_usecs) / qh->period)
2022                : (qh->usecs * 8);
2023
2024        dev_dbg(&qh->dev->dev,
2025                "unlink qh%d-%04x/%p start %d [%d/%d us]\n",
2026                qh->period,
2027                le32_to_cpup(&qh->hw_info2) & (QH_CMASK | QH_SMASK),
2028                qh, qh->start, qh->usecs, qh->c_usecs);
2029
2030        /* qh->qh_next still "live" to HC */
2031        qh->qh_state = QH_STATE_UNLINK;
2032        qh->qh_next.ptr = NULL;
2033        qh_put(qh);
2034
2035        /* maybe turn off periodic schedule */
2036        oxu->periodic_sched--;
2037        if (!oxu->periodic_sched)
2038                (void) disable_periodic(oxu);
2039}
2040
2041static void intr_deschedule(struct oxu_hcd *oxu, struct ehci_qh *qh)
2042{
2043        unsigned wait;
2044
2045        qh_unlink_periodic(oxu, qh);
2046
2047        /* simple/paranoid:  always delay, expecting the HC needs to read
2048         * qh->hw_next or finish a writeback after SPLIT/CSPLIT ... and
2049         * expect khubd to clean up after any CSPLITs we won't issue.
2050         * active high speed queues may need bigger delays...
2051         */
2052        if (list_empty(&qh->qtd_list)
2053                || (cpu_to_le32(QH_CMASK) & qh->hw_info2) != 0)
2054                wait = 2;
2055        else
2056                wait = 55;      /* worst case: 3 * 1024 */
2057
2058        udelay(wait);
2059        qh->qh_state = QH_STATE_IDLE;
2060        qh->hw_next = EHCI_LIST_END;
2061        wmb();
2062}
2063
2064static int check_period(struct oxu_hcd *oxu,
2065                        unsigned frame, unsigned uframe,
2066                        unsigned period, unsigned usecs)
2067{
2068        int claimed;
2069
2070        /* complete split running into next frame?
2071         * given FSTN support, we could sometimes check...
2072         */
2073        if (uframe >= 8)
2074                return 0;
2075
2076        /*
2077         * 80% periodic == 100 usec/uframe available
2078         * convert "usecs we need" to "max already claimed"
2079         */
2080        usecs = 100 - usecs;
2081
2082        /* we "know" 2 and 4 uframe intervals were rejected; so
2083         * for period 0, check _every_ microframe in the schedule.
2084         */
2085        if (unlikely(period == 0)) {
2086                do {
2087                        for (uframe = 0; uframe < 7; uframe++) {
2088                                claimed = periodic_usecs(oxu, frame, uframe);
2089                                if (claimed > usecs)
2090                                        return 0;
2091                        }
2092                } while ((frame += 1) < oxu->periodic_size);
2093
2094        /* just check the specified uframe, at that period */
2095        } else {
2096                do {
2097                        claimed = periodic_usecs(oxu, frame, uframe);
2098                        if (claimed > usecs)
2099                                return 0;
2100                } while ((frame += period) < oxu->periodic_size);
2101        }
2102
2103        return 1;
2104}
2105
2106static int check_intr_schedule(struct oxu_hcd   *oxu,
2107                                unsigned frame, unsigned uframe,
2108                                const struct ehci_qh *qh, __le32 *c_maskp)
2109{
2110        int retval = -ENOSPC;
2111
2112        if (qh->c_usecs && uframe >= 6)         /* FSTN territory? */
2113                goto done;
2114
2115        if (!check_period(oxu, frame, uframe, qh->period, qh->usecs))
2116                goto done;
2117        if (!qh->c_usecs) {
2118                retval = 0;
2119                *c_maskp = 0;
2120                goto done;
2121        }
2122
2123done:
2124        return retval;
2125}
2126
2127/* "first fit" scheduling policy used the first time through,
2128 * or when the previous schedule slot can't be re-used.
2129 */
2130static int qh_schedule(struct oxu_hcd *oxu, struct ehci_qh *qh)
2131{
2132        int             status;
2133        unsigned        uframe;
2134        __le32          c_mask;
2135        unsigned        frame;          /* 0..(qh->period - 1), or NO_FRAME */
2136
2137        qh_refresh(oxu, qh);
2138        qh->hw_next = EHCI_LIST_END;
2139        frame = qh->start;
2140
2141        /* reuse the previous schedule slots, if we can */
2142        if (frame < qh->period) {
2143                uframe = ffs(le32_to_cpup(&qh->hw_info2) & QH_SMASK);
2144                status = check_intr_schedule(oxu, frame, --uframe,
2145                                qh, &c_mask);
2146        } else {
2147                uframe = 0;
2148                c_mask = 0;
2149                status = -ENOSPC;
2150        }
2151
2152        /* else scan the schedule to find a group of slots such that all
2153         * uframes have enough periodic bandwidth available.
2154         */
2155        if (status) {
2156                /* "normal" case, uframing flexible except with splits */
2157                if (qh->period) {
2158                        frame = qh->period - 1;
2159                        do {
2160                                for (uframe = 0; uframe < 8; uframe++) {
2161                                        status = check_intr_schedule(oxu,
2162                                                        frame, uframe, qh,
2163                                                        &c_mask);
2164                                        if (status == 0)
2165                                                break;
2166                                }
2167                        } while (status && frame--);
2168
2169                /* qh->period == 0 means every uframe */
2170                } else {
2171                        frame = 0;
2172                        status = check_intr_schedule(oxu, 0, 0, qh, &c_mask);
2173                }
2174                if (status)
2175                        goto done;
2176                qh->start = frame;
2177
2178                /* reset S-frame and (maybe) C-frame masks */
2179                qh->hw_info2 &= cpu_to_le32(~(QH_CMASK | QH_SMASK));
2180                qh->hw_info2 |= qh->period
2181                        ? cpu_to_le32(1 << uframe)
2182                        : cpu_to_le32(QH_SMASK);
2183                qh->hw_info2 |= c_mask;
2184        } else
2185                oxu_dbg(oxu, "reused qh %p schedule\n", qh);
2186
2187        /* stuff into the periodic schedule */
2188        status = qh_link_periodic(oxu, qh);
2189done:
2190        return status;
2191}
2192
2193static int intr_submit(struct oxu_hcd *oxu, struct urb *urb,
2194                        struct list_head *qtd_list, gfp_t mem_flags)
2195{
2196        unsigned epnum;
2197        unsigned long flags;
2198        struct ehci_qh *qh;
2199        int status = 0;
2200        struct list_head        empty;
2201
2202        /* get endpoint and transfer/schedule data */
2203        epnum = urb->ep->desc.bEndpointAddress;
2204
2205        spin_lock_irqsave(&oxu->lock, flags);
2206
2207        if (unlikely(!HCD_HW_ACCESSIBLE(oxu_to_hcd(oxu)))) {
2208                status = -ESHUTDOWN;
2209                goto done;
2210        }
2211
2212        /* get qh and force any scheduling errors */
2213        INIT_LIST_HEAD(&empty);
2214        qh = qh_append_tds(oxu, urb, &empty, epnum, &urb->ep->hcpriv);
2215        if (qh == NULL) {
2216                status = -ENOMEM;
2217                goto done;
2218        }
2219        if (qh->qh_state == QH_STATE_IDLE) {
2220                status = qh_schedule(oxu, qh);
2221                if (status != 0)
2222                        goto done;
2223        }
2224
2225        /* then queue the urb's tds to the qh */
2226        qh = qh_append_tds(oxu, urb, qtd_list, epnum, &urb->ep->hcpriv);
2227        BUG_ON(qh == NULL);
2228
2229        /* ... update usbfs periodic stats */
2230        oxu_to_hcd(oxu)->self.bandwidth_int_reqs++;
2231
2232done:
2233        spin_unlock_irqrestore(&oxu->lock, flags);
2234        if (status)
2235                qtd_list_free(oxu, urb, qtd_list);
2236
2237        return status;
2238}
2239
2240static inline int itd_submit(struct oxu_hcd *oxu, struct urb *urb,
2241                                                gfp_t mem_flags)
2242{
2243        oxu_dbg(oxu, "iso support is missing!\n");
2244        return -ENOSYS;
2245}
2246
2247static inline int sitd_submit(struct oxu_hcd *oxu, struct urb *urb,
2248                                                gfp_t mem_flags)
2249{
2250        oxu_dbg(oxu, "split iso support is missing!\n");
2251        return -ENOSYS;
2252}
2253
2254static void scan_periodic(struct oxu_hcd *oxu)
2255{
2256        unsigned frame, clock, now_uframe, mod;
2257        unsigned modified;
2258
2259        mod = oxu->periodic_size << 3;
2260
2261        /*
2262         * When running, scan from last scan point up to "now"
2263         * else clean up by scanning everything that's left.
2264         * Touches as few pages as possible:  cache-friendly.
2265         */
2266        now_uframe = oxu->next_uframe;
2267        if (HC_IS_RUNNING(oxu_to_hcd(oxu)->state))
2268                clock = readl(&oxu->regs->frame_index);
2269        else
2270                clock = now_uframe + mod - 1;
2271        clock %= mod;
2272
2273        for (;;) {
2274                union ehci_shadow       q, *q_p;
2275                __le32                  type, *hw_p;
2276                unsigned                uframes;
2277
2278                /* don't scan past the live uframe */
2279                frame = now_uframe >> 3;
2280                if (frame == (clock >> 3))
2281                        uframes = now_uframe & 0x07;
2282                else {
2283                        /* safe to scan the whole frame at once */
2284                        now_uframe |= 0x07;
2285                        uframes = 8;
2286                }
2287
2288restart:
2289                /* scan each element in frame's queue for completions */
2290                q_p = &oxu->pshadow[frame];
2291                hw_p = &oxu->periodic[frame];
2292                q.ptr = q_p->ptr;
2293                type = Q_NEXT_TYPE(*hw_p);
2294                modified = 0;
2295
2296                while (q.ptr != NULL) {
2297                        union ehci_shadow temp;
2298                        int live;
2299
2300                        live = HC_IS_RUNNING(oxu_to_hcd(oxu)->state);
2301                        switch (type) {
2302                        case Q_TYPE_QH:
2303                                /* handle any completions */
2304                                temp.qh = qh_get(q.qh);
2305                                type = Q_NEXT_TYPE(q.qh->hw_next);
2306                                q = q.qh->qh_next;
2307                                modified = qh_completions(oxu, temp.qh);
2308                                if (unlikely(list_empty(&temp.qh->qtd_list)))
2309                                        intr_deschedule(oxu, temp.qh);
2310                                qh_put(temp.qh);
2311                                break;
2312                        default:
2313                                oxu_dbg(oxu, "corrupt type %d frame %d shadow %p\n",
2314                                        type, frame, q.ptr);
2315                                q.ptr = NULL;
2316                        }
2317
2318                        /* assume completion callbacks modify the queue */
2319                        if (unlikely(modified))
2320                                goto restart;
2321                }
2322
2323                /* Stop when we catch up to the HC */
2324
2325                /* FIXME:  this assumes we won't get lapped when
2326                 * latencies climb; that should be rare, but...
2327                 * detect it, and just go all the way around.
2328                 * FLR might help detect this case, so long as latencies
2329                 * don't exceed periodic_size msec (default 1.024 sec).
2330                 */
2331
2332                /* FIXME: likewise assumes HC doesn't halt mid-scan */
2333
2334                if (now_uframe == clock) {
2335                        unsigned        now;
2336
2337                        if (!HC_IS_RUNNING(oxu_to_hcd(oxu)->state))
2338                                break;
2339                        oxu->next_uframe = now_uframe;
2340                        now = readl(&oxu->regs->frame_index) % mod;
2341                        if (now_uframe == now)
2342                                break;
2343
2344                        /* rescan the rest of this frame, then ... */
2345                        clock = now;
2346                } else {
2347                        now_uframe++;
2348                        now_uframe %= mod;
2349                }
2350        }
2351}
2352
2353/* On some systems, leaving remote wakeup enabled prevents system shutdown.
2354 * The firmware seems to think that powering off is a wakeup event!
2355 * This routine turns off remote wakeup and everything else, on all ports.
2356 */
2357static void ehci_turn_off_all_ports(struct oxu_hcd *oxu)
2358{
2359        int port = HCS_N_PORTS(oxu->hcs_params);
2360
2361        while (port--)
2362                writel(PORT_RWC_BITS, &oxu->regs->port_status[port]);
2363}
2364
2365static void ehci_port_power(struct oxu_hcd *oxu, int is_on)
2366{
2367        unsigned port;
2368
2369        if (!HCS_PPC(oxu->hcs_params))
2370                return;
2371
2372        oxu_dbg(oxu, "...power%s ports...\n", is_on ? "up" : "down");
2373        for (port = HCS_N_PORTS(oxu->hcs_params); port > 0; )
2374                (void) oxu_hub_control(oxu_to_hcd(oxu),
2375                                is_on ? SetPortFeature : ClearPortFeature,
2376                                USB_PORT_FEAT_POWER,
2377                                port--, NULL, 0);
2378        msleep(20);
2379}
2380
2381/* Called from some interrupts, timers, and so on.
2382 * It calls driver completion functions, after dropping oxu->lock.
2383 */
2384static void ehci_work(struct oxu_hcd *oxu)
2385{
2386        timer_action_done(oxu, TIMER_IO_WATCHDOG);
2387        if (oxu->reclaim_ready)
2388                end_unlink_async(oxu);
2389
2390        /* another CPU may drop oxu->lock during a schedule scan while
2391         * it reports urb completions.  this flag guards against bogus
2392         * attempts at re-entrant schedule scanning.
2393         */
2394        if (oxu->scanning)
2395                return;
2396        oxu->scanning = 1;
2397        scan_async(oxu);
2398        if (oxu->next_uframe != -1)
2399                scan_periodic(oxu);
2400        oxu->scanning = 0;
2401
2402        /* the IO watchdog guards against hardware or driver bugs that
2403         * misplace IRQs, and should let us run completely without IRQs.
2404         * such lossage has been observed on both VT6202 and VT8235.
2405         */
2406        if (HC_IS_RUNNING(oxu_to_hcd(oxu)->state) &&
2407                        (oxu->async->qh_next.ptr != NULL ||
2408                         oxu->periodic_sched != 0))
2409                timer_action(oxu, TIMER_IO_WATCHDOG);
2410}
2411
2412static void unlink_async(struct oxu_hcd *oxu, struct ehci_qh *qh)
2413{
2414        /* if we need to use IAA and it's busy, defer */
2415        if (qh->qh_state == QH_STATE_LINKED
2416                        && oxu->reclaim
2417                        && HC_IS_RUNNING(oxu_to_hcd(oxu)->state)) {
2418                struct ehci_qh          *last;
2419
2420                for (last = oxu->reclaim;
2421                                last->reclaim;
2422                                last = last->reclaim)
2423                        continue;
2424                qh->qh_state = QH_STATE_UNLINK_WAIT;
2425                last->reclaim = qh;
2426
2427        /* bypass IAA if the hc can't care */
2428        } else if (!HC_IS_RUNNING(oxu_to_hcd(oxu)->state) && oxu->reclaim)
2429                end_unlink_async(oxu);
2430
2431        /* something else might have unlinked the qh by now */
2432        if (qh->qh_state == QH_STATE_LINKED)
2433                start_unlink_async(oxu, qh);
2434}
2435
2436/*
2437 * USB host controller methods
2438 */
2439
2440static irqreturn_t oxu210_hcd_irq(struct usb_hcd *hcd)
2441{
2442        struct oxu_hcd *oxu = hcd_to_oxu(hcd);
2443        u32 status, pcd_status = 0;
2444        int bh;
2445
2446        spin_lock(&oxu->lock);
2447
2448        status = readl(&oxu->regs->status);
2449
2450        /* e.g. cardbus physical eject */
2451        if (status == ~(u32) 0) {
2452                oxu_dbg(oxu, "device removed\n");
2453                goto dead;
2454        }
2455
2456        /* Shared IRQ? */
2457        status &= INTR_MASK;
2458        if (!status || unlikely(hcd->state == HC_STATE_HALT)) {
2459                spin_unlock(&oxu->lock);
2460                return IRQ_NONE;
2461        }
2462
2463        /* clear (just) interrupts */
2464        writel(status, &oxu->regs->status);
2465        readl(&oxu->regs->command);     /* unblock posted write */
2466        bh = 0;
2467
2468#ifdef OXU_VERBOSE_DEBUG
2469        /* unrequested/ignored: Frame List Rollover */
2470        dbg_status(oxu, "irq", status);
2471#endif
2472
2473        /* INT, ERR, and IAA interrupt rates can be throttled */
2474
2475        /* normal [4.15.1.2] or error [4.15.1.1] completion */
2476        if (likely((status & (STS_INT|STS_ERR)) != 0))
2477                bh = 1;
2478
2479        /* complete the unlinking of some qh [4.15.2.3] */
2480        if (status & STS_IAA) {
2481                oxu->reclaim_ready = 1;
2482                bh = 1;
2483        }
2484
2485        /* remote wakeup [4.3.1] */
2486        if (status & STS_PCD) {
2487                unsigned i = HCS_N_PORTS(oxu->hcs_params);
2488                pcd_status = status;
2489
2490                /* resume root hub? */
2491                if (!(readl(&oxu->regs->command) & CMD_RUN))
2492                        usb_hcd_resume_root_hub(hcd);
2493
2494                while (i--) {
2495                        int pstatus = readl(&oxu->regs->port_status[i]);
2496
2497                        if (pstatus & PORT_OWNER)
2498                                continue;
2499                        if (!(pstatus & PORT_RESUME)
2500                                        || oxu->reset_done[i] != 0)
2501                                continue;
2502
2503                        /* start 20 msec resume signaling from this port,
2504                         * and make khubd collect PORT_STAT_C_SUSPEND to
2505                         * stop that signaling.
2506                         */
2507                        oxu->reset_done[i] = jiffies + msecs_to_jiffies(20);
2508                        oxu_dbg(oxu, "port %d remote wakeup\n", i + 1);
2509                        mod_timer(&hcd->rh_timer, oxu->reset_done[i]);
2510                }
2511        }
2512
2513        /* PCI errors [4.15.2.4] */
2514        if (unlikely((status & STS_FATAL) != 0)) {
2515                /* bogus "fatal" IRQs appear on some chips... why?  */
2516                status = readl(&oxu->regs->status);
2517                dbg_cmd(oxu, "fatal", readl(&oxu->regs->command));
2518                dbg_status(oxu, "fatal", status);
2519                if (status & STS_HALT) {
2520                        oxu_err(oxu, "fatal error\n");
2521dead:
2522                        ehci_reset(oxu);
2523                        writel(0, &oxu->regs->configured_flag);
2524                        usb_hc_died(hcd);
2525                        /* generic layer kills/unlinks all urbs, then
2526                         * uses oxu_stop to clean up the rest
2527                         */
2528                        bh = 1;
2529                }
2530        }
2531
2532        if (bh)
2533                ehci_work(oxu);
2534        spin_unlock(&oxu->lock);
2535        if (pcd_status & STS_PCD)
2536                usb_hcd_poll_rh_status(hcd);
2537        return IRQ_HANDLED;
2538}
2539
2540static irqreturn_t oxu_irq(struct usb_hcd *hcd)
2541{
2542        struct oxu_hcd *oxu = hcd_to_oxu(hcd);
2543        int ret = IRQ_HANDLED;
2544
2545        u32 status = oxu_readl(hcd->regs, OXU_CHIPIRQSTATUS);
2546        u32 enable = oxu_readl(hcd->regs, OXU_CHIPIRQEN_SET);
2547
2548        /* Disable all interrupt */
2549        oxu_writel(hcd->regs, OXU_CHIPIRQEN_CLR, enable);
2550
2551        if ((oxu->is_otg && (status & OXU_USBOTGI)) ||
2552                (!oxu->is_otg && (status & OXU_USBSPHI)))
2553                oxu210_hcd_irq(hcd);
2554        else
2555                ret = IRQ_NONE;
2556
2557        /* Enable all interrupt back */
2558        oxu_writel(hcd->regs, OXU_CHIPIRQEN_SET, enable);
2559
2560        return ret;
2561}
2562
2563static void oxu_watchdog(unsigned long param)
2564{
2565        struct oxu_hcd  *oxu = (struct oxu_hcd *) param;
2566        unsigned long flags;
2567
2568        spin_lock_irqsave(&oxu->lock, flags);
2569
2570        /* lost IAA irqs wedge things badly; seen with a vt8235 */
2571        if (oxu->reclaim) {
2572                u32 status = readl(&oxu->regs->status);
2573                if (status & STS_IAA) {
2574                        oxu_vdbg(oxu, "lost IAA\n");
2575                        writel(STS_IAA, &oxu->regs->status);
2576                        oxu->reclaim_ready = 1;
2577                }
2578        }
2579
2580        /* stop async processing after it's idled a bit */
2581        if (test_bit(TIMER_ASYNC_OFF, &oxu->actions))
2582                start_unlink_async(oxu, oxu->async);
2583
2584        /* oxu could run by timer, without IRQs ... */
2585        ehci_work(oxu);
2586
2587        spin_unlock_irqrestore(&oxu->lock, flags);
2588}
2589
2590/* One-time init, only for memory state.
2591 */
2592static int oxu_hcd_init(struct usb_hcd *hcd)
2593{
2594        struct oxu_hcd *oxu = hcd_to_oxu(hcd);
2595        u32 temp;
2596        int retval;
2597        u32 hcc_params;
2598
2599        spin_lock_init(&oxu->lock);
2600
2601        init_timer(&oxu->watchdog);
2602        oxu->watchdog.function = oxu_watchdog;
2603        oxu->watchdog.data = (unsigned long) oxu;
2604
2605        /*
2606         * hw default: 1K periodic list heads, one per frame.
2607         * periodic_size can shrink by USBCMD update if hcc_params allows.
2608         */
2609        oxu->periodic_size = DEFAULT_I_TDPS;
2610        retval = ehci_mem_init(oxu, GFP_KERNEL);
2611        if (retval < 0)
2612                return retval;
2613
2614        /* controllers may cache some of the periodic schedule ... */
2615        hcc_params = readl(&oxu->caps->hcc_params);
2616        if (HCC_ISOC_CACHE(hcc_params))         /* full frame cache */
2617                oxu->i_thresh = 8;
2618        else                                    /* N microframes cached */
2619                oxu->i_thresh = 2 + HCC_ISOC_THRES(hcc_params);
2620
2621        oxu->reclaim = NULL;
2622        oxu->reclaim_ready = 0;
2623        oxu->next_uframe = -1;
2624
2625        /*
2626         * dedicate a qh for the async ring head, since we couldn't unlink
2627         * a 'real' qh without stopping the async schedule [4.8].  use it
2628         * as the 'reclamation list head' too.
2629         * its dummy is used in hw_alt_next of many tds, to prevent the qh
2630         * from automatically advancing to the next td after short reads.
2631         */
2632        oxu->async->qh_next.qh = NULL;
2633        oxu->async->hw_next = QH_NEXT(oxu->async->qh_dma);
2634        oxu->async->hw_info1 = cpu_to_le32(QH_HEAD);
2635        oxu->async->hw_token = cpu_to_le32(QTD_STS_HALT);
2636        oxu->async->hw_qtd_next = EHCI_LIST_END;
2637        oxu->async->qh_state = QH_STATE_LINKED;
2638        oxu->async->hw_alt_next = QTD_NEXT(oxu->async->dummy->qtd_dma);
2639
2640        /* clear interrupt enables, set irq latency */
2641        if (log2_irq_thresh < 0 || log2_irq_thresh > 6)
2642                log2_irq_thresh = 0;
2643        temp = 1 << (16 + log2_irq_thresh);
2644        if (HCC_CANPARK(hcc_params)) {
2645                /* HW default park == 3, on hardware that supports it (like
2646                 * NVidia and ALI silicon), maximizes throughput on the async
2647                 * schedule by avoiding QH fetches between transfers.
2648                 *
2649                 * With fast usb storage devices and NForce2, "park" seems to
2650                 * make problems:  throughput reduction (!), data errors...
2651                 */
2652                if (park) {
2653                        park = min(park, (unsigned) 3);
2654                        temp |= CMD_PARK;
2655                        temp |= park << 8;
2656                }
2657                oxu_dbg(oxu, "park %d\n", park);
2658        }
2659        if (HCC_PGM_FRAMELISTLEN(hcc_params)) {
2660                /* periodic schedule size can be smaller than default */
2661                temp &= ~(3 << 2);
2662                temp |= (EHCI_TUNE_FLS << 2);
2663        }
2664        oxu->command = temp;
2665
2666        return 0;
2667}
2668
2669/* Called during probe() after chip reset completes.
2670 */
2671static int oxu_reset(struct usb_hcd *hcd)
2672{
2673        struct oxu_hcd *oxu = hcd_to_oxu(hcd);
2674        int ret;
2675
2676        spin_lock_init(&oxu->mem_lock);
2677        INIT_LIST_HEAD(&oxu->urb_list);
2678        oxu->urb_len = 0;
2679
2680        /* FIMXE */
2681        hcd->self.controller->dma_mask = NULL;
2682
2683        if (oxu->is_otg) {
2684                oxu->caps = hcd->regs + OXU_OTG_CAP_OFFSET;
2685                oxu->regs = hcd->regs + OXU_OTG_CAP_OFFSET + \
2686                        HC_LENGTH(readl(&oxu->caps->hc_capbase));
2687
2688                oxu->mem = hcd->regs + OXU_SPH_MEM;
2689        } else {
2690                oxu->caps = hcd->regs + OXU_SPH_CAP_OFFSET;
2691                oxu->regs = hcd->regs + OXU_SPH_CAP_OFFSET + \
2692                        HC_LENGTH(readl(&oxu->caps->hc_capbase));
2693
2694                oxu->mem = hcd->regs + OXU_OTG_MEM;
2695        }
2696
2697        oxu->hcs_params = readl(&oxu->caps->hcs_params);
2698        oxu->sbrn = 0x20;
2699
2700        ret = oxu_hcd_init(hcd);
2701        if (ret)
2702                return ret;
2703
2704        return 0;
2705}
2706
2707static int oxu_run(struct usb_hcd *hcd)
2708{
2709        struct oxu_hcd *oxu = hcd_to_oxu(hcd);
2710        int retval;
2711        u32 temp, hcc_params;
2712
2713        hcd->uses_new_polling = 1;
2714
2715        /* EHCI spec section 4.1 */
2716        retval = ehci_reset(oxu);
2717        if (retval != 0) {
2718                ehci_mem_cleanup(oxu);
2719                return retval;
2720        }
2721        writel(oxu->periodic_dma, &oxu->regs->frame_list);
2722        writel((u32) oxu->async->qh_dma, &oxu->regs->async_next);
2723
2724        /* hcc_params controls whether oxu->regs->segment must (!!!)
2725         * be used; it constrains QH/ITD/SITD and QTD locations.
2726         * pci_pool consistent memory always uses segment zero.
2727         * streaming mappings for I/O buffers, like pci_map_single(),
2728         * can return segments above 4GB, if the device allows.
2729         *
2730         * NOTE:  the dma mask is visible through dma_supported(), so
2731         * drivers can pass this info along ... like NETIF_F_HIGHDMA,
2732         * Scsi_Host.highmem_io, and so forth.  It's readonly to all
2733         * host side drivers though.
2734         */
2735        hcc_params = readl(&oxu->caps->hcc_params);
2736        if (HCC_64BIT_ADDR(hcc_params))
2737                writel(0, &oxu->regs->segment);
2738
2739        oxu->command &= ~(CMD_LRESET | CMD_IAAD | CMD_PSE |
2740                                CMD_ASE | CMD_RESET);
2741        oxu->command |= CMD_RUN;
2742        writel(oxu->command, &oxu->regs->command);
2743        dbg_cmd(oxu, "init", oxu->command);
2744
2745        /*
2746         * Start, enabling full USB 2.0 functionality ... usb 1.1 devices
2747         * are explicitly handed to companion controller(s), so no TT is
2748         * involved with the root hub.  (Except where one is integrated,
2749         * and there's no companion controller unless maybe for USB OTG.)
2750         */
2751        hcd->state = HC_STATE_RUNNING;
2752        writel(FLAG_CF, &oxu->regs->configured_flag);
2753        readl(&oxu->regs->command);     /* unblock posted writes */
2754
2755        temp = HC_VERSION(readl(&oxu->caps->hc_capbase));
2756        oxu_info(oxu, "USB %x.%x started, quasi-EHCI %x.%02x, driver %s%s\n",
2757                ((oxu->sbrn & 0xf0)>>4), (oxu->sbrn & 0x0f),
2758                temp >> 8, temp & 0xff, DRIVER_VERSION,
2759                ignore_oc ? ", overcurrent ignored" : "");
2760
2761        writel(INTR_MASK, &oxu->regs->intr_enable); /* Turn On Interrupts */
2762
2763        return 0;
2764}
2765
2766static void oxu_stop(struct usb_hcd *hcd)
2767{
2768        struct oxu_hcd *oxu = hcd_to_oxu(hcd);
2769
2770        /* Turn off port power on all root hub ports. */
2771        ehci_port_power(oxu, 0);
2772
2773        /* no more interrupts ... */
2774        del_timer_sync(&oxu->watchdog);
2775
2776        spin_lock_irq(&oxu->lock);
2777        if (HC_IS_RUNNING(hcd->state))
2778                ehci_quiesce(oxu);
2779
2780        ehci_reset(oxu);
2781        writel(0, &oxu->regs->intr_enable);
2782        spin_unlock_irq(&oxu->lock);
2783
2784        /* let companion controllers work when we aren't */
2785        writel(0, &oxu->regs->configured_flag);
2786
2787        /* root hub is shut down separately (first, when possible) */
2788        spin_lock_irq(&oxu->lock);
2789        if (oxu->async)
2790                ehci_work(oxu);
2791        spin_unlock_irq(&oxu->lock);
2792        ehci_mem_cleanup(oxu);
2793
2794        dbg_status(oxu, "oxu_stop completed", readl(&oxu->regs->status));
2795}
2796
2797/* Kick in for silicon on any bus (not just pci, etc).
2798 * This forcibly disables dma and IRQs, helping kexec and other cases
2799 * where the next system software may expect clean state.
2800 */
2801static void oxu_shutdown(struct usb_hcd *hcd)
2802{
2803        struct oxu_hcd *oxu = hcd_to_oxu(hcd);
2804
2805        (void) ehci_halt(oxu);
2806        ehci_turn_off_all_ports(oxu);
2807
2808        /* make BIOS/etc use companion controller during reboot */
2809        writel(0, &oxu->regs->configured_flag);
2810
2811        /* unblock posted writes */
2812        readl(&oxu->regs->configured_flag);
2813}
2814
2815/* Non-error returns are a promise to giveback() the urb later
2816 * we drop ownership so next owner (or urb unlink) can get it
2817 *
2818 * urb + dev is in hcd.self.controller.urb_list
2819 * we're queueing TDs onto software and hardware lists
2820 *
2821 * hcd-specific init for hcpriv hasn't been done yet
2822 *
2823 * NOTE:  control, bulk, and interrupt share the same code to append TDs
2824 * to a (possibly active) QH, and the same QH scanning code.
2825 */
2826static int __oxu_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,
2827                                gfp_t mem_flags)
2828{
2829        struct oxu_hcd *oxu = hcd_to_oxu(hcd);
2830        struct list_head qtd_list;
2831
2832        INIT_LIST_HEAD(&qtd_list);
2833
2834        switch (usb_pipetype(urb->pipe)) {
2835        case PIPE_CONTROL:
2836        case PIPE_BULK:
2837        default:
2838                if (!qh_urb_transaction(oxu, urb, &qtd_list, mem_flags))
2839                        return -ENOMEM;
2840                return submit_async(oxu, urb, &qtd_list, mem_flags);
2841
2842        case PIPE_INTERRUPT:
2843                if (!qh_urb_transaction(oxu, urb, &qtd_list, mem_flags))
2844                        return -ENOMEM;
2845                return intr_submit(oxu, urb, &qtd_list, mem_flags);
2846
2847        case PIPE_ISOCHRONOUS:
2848                if (urb->dev->speed == USB_SPEED_HIGH)
2849                        return itd_submit(oxu, urb, mem_flags);
2850                else
2851                        return sitd_submit(oxu, urb, mem_flags);
2852        }
2853}
2854
2855/* This function is responsible for breaking URBs with big data size
2856 * into smaller size and processing small urbs in sequence.
2857 */
2858static int oxu_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,
2859                                gfp_t mem_flags)
2860{
2861        struct oxu_hcd *oxu = hcd_to_oxu(hcd);
2862        int num, rem;
2863        int transfer_buffer_length;
2864        void *transfer_buffer;
2865        struct urb *murb;
2866        int i, ret;
2867
2868        /* If not bulk pipe just enqueue the URB */
2869        if (!usb_pipebulk(urb->pipe))
2870                return __oxu_urb_enqueue(hcd, urb, mem_flags);
2871
2872        /* Otherwise we should verify the USB transfer buffer size! */
2873        transfer_buffer = urb->transfer_buffer;
2874        transfer_buffer_length = urb->transfer_buffer_length;
2875
2876        num = urb->transfer_buffer_length / 4096;
2877        rem = urb->transfer_buffer_length % 4096;
2878        if (rem != 0)
2879                num++;
2880
2881        /* If URB is smaller than 4096 bytes just enqueue it! */
2882        if (num == 1)
2883                return __oxu_urb_enqueue(hcd, urb, mem_flags);
2884
2885        /* Ok, we have more job to do! :) */
2886
2887        for (i = 0; i < num - 1; i++) {
2888                /* Get free micro URB poll till a free urb is received */
2889
2890                do {
2891                        murb = (struct urb *) oxu_murb_alloc(oxu);
2892                        if (!murb)
2893                                schedule();
2894                } while (!murb);
2895
2896                /* Coping the urb */
2897                memcpy(murb, urb, sizeof(struct urb));
2898
2899                murb->transfer_buffer_length = 4096;
2900                murb->transfer_buffer = transfer_buffer + i * 4096;
2901
2902                /* Null pointer for the encodes that this is a micro urb */
2903                murb->complete = NULL;
2904
2905                ((struct oxu_murb *) murb)->main = urb;
2906                ((struct oxu_murb *) murb)->last = 0;
2907
2908                /* This loop is to guarantee urb to be processed when there's
2909                 * not enough resources at a particular time by retrying.
2910                 */
2911                do {
2912                        ret  = __oxu_urb_enqueue(hcd, murb, mem_flags);
2913                        if (ret)
2914                                schedule();
2915                } while (ret);
2916        }
2917
2918        /* Last urb requires special handling  */
2919
2920        /* Get free micro URB poll till a free urb is received */
2921        do {
2922                murb = (struct urb *) oxu_murb_alloc(oxu);
2923                if (!murb)
2924                        schedule();
2925        } while (!murb);
2926
2927        /* Coping the urb */
2928        memcpy(murb, urb, sizeof(struct urb));
2929
2930        murb->transfer_buffer_length = rem > 0 ? rem : 4096;
2931        murb->transfer_buffer = transfer_buffer + (num - 1) * 4096;
2932
2933        /* Null pointer for the encodes that this is a micro urb */
2934        murb->complete = NULL;
2935
2936        ((struct oxu_murb *) murb)->main = urb;
2937        ((struct oxu_murb *) murb)->last = 1;
2938
2939        do {
2940                ret = __oxu_urb_enqueue(hcd, murb, mem_flags);
2941                if (ret)
2942                        schedule();
2943        } while (ret);
2944
2945        return ret;
2946}
2947
2948/* Remove from hardware lists.
2949 * Completions normally happen asynchronously
2950 */
2951static int oxu_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
2952{
2953        struct oxu_hcd *oxu = hcd_to_oxu(hcd);
2954        struct ehci_qh *qh;
2955        unsigned long flags;
2956
2957        spin_lock_irqsave(&oxu->lock, flags);
2958        switch (usb_pipetype(urb->pipe)) {
2959        case PIPE_CONTROL:
2960        case PIPE_BULK:
2961        default:
2962                qh = (struct ehci_qh *) urb->hcpriv;
2963                if (!qh)
2964                        break;
2965                unlink_async(oxu, qh);
2966                break;
2967
2968        case PIPE_INTERRUPT:
2969                qh = (struct ehci_qh *) urb->hcpriv;
2970                if (!qh)
2971                        break;
2972                switch (qh->qh_state) {
2973                case QH_STATE_LINKED:
2974                        intr_deschedule(oxu, qh);
2975                        /* FALL THROUGH */
2976                case QH_STATE_IDLE:
2977                        qh_completions(oxu, qh);
2978                        break;
2979                default:
2980                        oxu_dbg(oxu, "bogus qh %p state %d\n",
2981                                        qh, qh->qh_state);
2982                        goto done;
2983                }
2984
2985                /* reschedule QH iff another request is queued */
2986                if (!list_empty(&qh->qtd_list)
2987                                && HC_IS_RUNNING(hcd->state)) {
2988                        int status;
2989
2990                        status = qh_schedule(oxu, qh);
2991                        spin_unlock_irqrestore(&oxu->lock, flags);
2992
2993                        if (status != 0) {
2994                                /* shouldn't happen often, but ...
2995                                 * FIXME kill those tds' urbs
2996                                 */
2997                                dev_err(hcd->self.controller,
2998                                        "can't reschedule qh %p, err %d\n", qh,
2999                                        status);
3000                        }
3001                        return status;
3002                }
3003                break;
3004        }
3005done:
3006        spin_unlock_irqrestore(&oxu->lock, flags);
3007        return 0;
3008}
3009
3010/* Bulk qh holds the data toggle */
3011static void oxu_endpoint_disable(struct usb_hcd *hcd,
3012                                        struct usb_host_endpoint *ep)
3013{
3014        struct oxu_hcd *oxu = hcd_to_oxu(hcd);
3015        unsigned long           flags;
3016        struct ehci_qh          *qh, *tmp;
3017
3018        /* ASSERT:  any requests/urbs are being unlinked */
3019        /* ASSERT:  nobody can be submitting urbs for this any more */
3020
3021rescan:
3022        spin_lock_irqsave(&oxu->lock, flags);
3023        qh = ep->hcpriv;
3024        if (!qh)
3025                goto done;
3026
3027        /* endpoints can be iso streams.  for now, we don't
3028         * accelerate iso completions ... so spin a while.
3029         */
3030        if (qh->hw_info1 == 0) {
3031                oxu_vdbg(oxu, "iso delay\n");
3032                goto idle_timeout;
3033        }
3034
3035        if (!HC_IS_RUNNING(hcd->state))
3036                qh->qh_state = QH_STATE_IDLE;
3037        switch (qh->qh_state) {
3038        case QH_STATE_LINKED:
3039                for (tmp = oxu->async->qh_next.qh;
3040                                tmp && tmp != qh;
3041                                tmp = tmp->qh_next.qh)
3042                        continue;
3043                /* periodic qh self-unlinks on empty */
3044                if (!tmp)
3045                        goto nogood;
3046                unlink_async(oxu, qh);
3047                /* FALL THROUGH */
3048        case QH_STATE_UNLINK:           /* wait for hw to finish? */
3049idle_timeout:
3050                spin_unlock_irqrestore(&oxu->lock, flags);
3051                schedule_timeout_uninterruptible(1);
3052                goto rescan;
3053        case QH_STATE_IDLE:             /* fully unlinked */
3054                if (list_empty(&qh->qtd_list)) {
3055                        qh_put(qh);
3056                        break;
3057                }
3058                /* else FALL THROUGH */
3059        default:
3060nogood:
3061                /* caller was supposed to have unlinked any requests;
3062                 * that's not our job.  just leak this memory.
3063                 */
3064                oxu_err(oxu, "qh %p (#%02x) state %d%s\n",
3065                        qh, ep->desc.bEndpointAddress, qh->qh_state,
3066                        list_empty(&qh->qtd_list) ? "" : "(has tds)");
3067                break;
3068        }
3069        ep->hcpriv = NULL;
3070done:
3071        spin_unlock_irqrestore(&oxu->lock, flags);
3072}
3073
3074static int oxu_get_frame(struct usb_hcd *hcd)
3075{
3076        struct oxu_hcd *oxu = hcd_to_oxu(hcd);
3077
3078        return (readl(&oxu->regs->frame_index) >> 3) %
3079                oxu->periodic_size;
3080}
3081
3082/* Build "status change" packet (one or two bytes) from HC registers */
3083static int oxu_hub_status_data(struct usb_hcd *hcd, char *buf)
3084{
3085        struct oxu_hcd *oxu = hcd_to_oxu(hcd);
3086        u32 temp, mask, status = 0;
3087        int ports, i, retval = 1;
3088        unsigned long flags;
3089
3090        /* if !PM_RUNTIME, root hub timers won't get shut down ... */
3091        if (!HC_IS_RUNNING(hcd->state))
3092                return 0;
3093
3094        /* init status to no-changes */
3095        buf[0] = 0;
3096        ports = HCS_N_PORTS(oxu->hcs_params);
3097        if (ports > 7) {
3098                buf[1] = 0;
3099                retval++;
3100        }
3101
3102        /* Some boards (mostly VIA?) report bogus overcurrent indications,
3103         * causing massive log spam unless we completely ignore them.  It
3104         * may be relevant that VIA VT8235 controllers, where PORT_POWER is
3105         * always set, seem to clear PORT_OCC and PORT_CSC when writing to
3106         * PORT_POWER; that's surprising, but maybe within-spec.
3107         */
3108        if (!ignore_oc)
3109                mask = PORT_CSC | PORT_PEC | PORT_OCC;
3110        else
3111                mask = PORT_CSC | PORT_PEC;
3112
3113        /* no hub change reports (bit 0) for now (power, ...) */
3114
3115        /* port N changes (bit N)? */
3116        spin_lock_irqsave(&oxu->lock, flags);
3117        for (i = 0; i < ports; i++) {
3118                temp = readl(&oxu->regs->port_status[i]);
3119
3120                /*
3121                 * Return status information even for ports with OWNER set.
3122                 * Otherwise khubd wouldn't see the disconnect event when a
3123                 * high-speed device is switched over to the companion
3124                 * controller by the user.
3125                 */
3126
3127                if (!(temp & PORT_CONNECT))
3128                        oxu->reset_done[i] = 0;
3129                if ((temp & mask) != 0 || ((temp & PORT_RESUME) != 0 &&
3130                                time_after_eq(jiffies, oxu->reset_done[i]))) {
3131                        if (i < 7)
3132                                buf[0] |= 1 << (i + 1);
3133                        else
3134                                buf[1] |= 1 << (i - 7);
3135                        status = STS_PCD;
3136                }
3137        }
3138        /* FIXME autosuspend idle root hubs */
3139        spin_unlock_irqrestore(&oxu->lock, flags);
3140        return status ? retval : 0;
3141}
3142
3143/* Returns the speed of a device attached to a port on the root hub. */
3144static inline unsigned int oxu_port_speed(struct oxu_hcd *oxu,
3145                                                unsigned int portsc)
3146{
3147        switch ((portsc >> 26) & 3) {
3148        case 0:
3149                return 0;
3150        case 1:
3151                return USB_PORT_STAT_LOW_SPEED;
3152        case 2:
3153        default:
3154                return USB_PORT_STAT_HIGH_SPEED;
3155        }
3156}
3157
3158#define PORT_WAKE_BITS  (PORT_WKOC_E|PORT_WKDISC_E|PORT_WKCONN_E)
3159static int oxu_hub_control(struct usb_hcd *hcd, u16 typeReq,
3160                                u16 wValue, u16 wIndex, char *buf, u16 wLength)
3161{
3162        struct oxu_hcd *oxu = hcd_to_oxu(hcd);
3163        int ports = HCS_N_PORTS(oxu->hcs_params);
3164        u32 __iomem *status_reg = &oxu->regs->port_status[wIndex - 1];
3165        u32 temp, status;
3166        unsigned long   flags;
3167        int retval = 0;
3168        unsigned selector;
3169
3170        /*
3171         * FIXME:  support SetPortFeatures USB_PORT_FEAT_INDICATOR.
3172         * HCS_INDICATOR may say we can change LEDs to off/amber/green.
3173         * (track current state ourselves) ... blink for diagnostics,
3174         * power, "this is the one", etc.  EHCI spec supports this.
3175         */
3176
3177        spin_lock_irqsave(&oxu->lock, flags);
3178        switch (typeReq) {
3179        case ClearHubFeature:
3180                switch (wValue) {
3181                case C_HUB_LOCAL_POWER:
3182                case C_HUB_OVER_CURRENT:
3183                        /* no hub-wide feature/status flags */
3184                        break;
3185                default:
3186                        goto error;
3187                }
3188                break;
3189        case ClearPortFeature:
3190                if (!wIndex || wIndex > ports)
3191                        goto error;
3192                wIndex--;
3193                temp = readl(status_reg);
3194
3195                /*
3196                 * Even if OWNER is set, so the port is owned by the
3197                 * companion controller, khubd needs to be able to clear
3198                 * the port-change status bits (especially
3199                 * USB_PORT_STAT_C_CONNECTION).
3200                 */
3201
3202                switch (wValue) {
3203                case USB_PORT_FEAT_ENABLE:
3204                        writel(temp & ~PORT_PE, status_reg);
3205                        break;
3206                case USB_PORT_FEAT_C_ENABLE:
3207                        writel((temp & ~PORT_RWC_BITS) | PORT_PEC, status_reg);
3208                        break;
3209                case USB_PORT_FEAT_SUSPEND:
3210                        if (temp & PORT_RESET)
3211                                goto error;
3212                        if (temp & PORT_SUSPEND) {
3213                                if ((temp & PORT_PE) == 0)
3214                                        goto error;
3215                                /* resume signaling for 20 msec */
3216                                temp &= ~(PORT_RWC_BITS | PORT_WAKE_BITS);
3217                                writel(temp | PORT_RESUME, status_reg);
3218                                oxu->reset_done[wIndex] = jiffies
3219                                                + msecs_to_jiffies(20);
3220                        }
3221                        break;
3222                case USB_PORT_FEAT_C_SUSPEND:
3223                        /* we auto-clear this feature */
3224                        break;
3225                case USB_PORT_FEAT_POWER:
3226                        if (HCS_PPC(oxu->hcs_params))
3227                                writel(temp & ~(PORT_RWC_BITS | PORT_POWER),
3228                                          status_reg);
3229                        break;
3230                case USB_PORT_FEAT_C_CONNECTION:
3231                        writel((temp & ~PORT_RWC_BITS) | PORT_CSC, status_reg);
3232                        break;
3233                case USB_PORT_FEAT_C_OVER_CURRENT:
3234                        writel((temp & ~PORT_RWC_BITS) | PORT_OCC, status_reg);
3235                        break;
3236                case USB_PORT_FEAT_C_RESET:
3237                        /* GetPortStatus clears reset */
3238                        break;
3239                default:
3240                        goto error;
3241                }
3242                readl(&oxu->regs->command);     /* unblock posted write */
3243                break;
3244        case GetHubDescriptor:
3245                ehci_hub_descriptor(oxu, (struct usb_hub_descriptor *)
3246                        buf);
3247                break;
3248        case GetHubStatus:
3249                /* no hub-wide feature/status flags */
3250                memset(buf, 0, 4);
3251                break;
3252        case GetPortStatus:
3253                if (!wIndex || wIndex > ports)
3254                        goto error;
3255                wIndex--;
3256                status = 0;
3257                temp = readl(status_reg);
3258
3259                /* wPortChange bits */
3260                if (temp & PORT_CSC)
3261                        status |= USB_PORT_STAT_C_CONNECTION << 16;
3262                if (temp & PORT_PEC)
3263                        status |= USB_PORT_STAT_C_ENABLE << 16;
3264                if ((temp & PORT_OCC) && !ignore_oc)
3265                        status |= USB_PORT_STAT_C_OVERCURRENT << 16;
3266
3267                /* whoever resumes must GetPortStatus to complete it!! */
3268                if (temp & PORT_RESUME) {
3269
3270                        /* Remote Wakeup received? */
3271                        if (!oxu->reset_done[wIndex]) {
3272                                /* resume signaling for 20 msec */
3273                                oxu->reset_done[wIndex] = jiffies
3274                                                + msecs_to_jiffies(20);
3275                                /* check the port again */
3276                                mod_timer(&oxu_to_hcd(oxu)->rh_timer,
3277                                                oxu->reset_done[wIndex]);
3278                        }
3279
3280                        /* resume completed? */
3281                        else if (time_after_eq(jiffies,
3282                                        oxu->reset_done[wIndex])) {
3283                                status |= USB_PORT_STAT_C_SUSPEND << 16;
3284                                oxu->reset_done[wIndex] = 0;
3285
3286                                /* stop resume signaling */
3287                                temp = readl(status_reg);
3288                                writel(temp & ~(PORT_RWC_BITS | PORT_RESUME),
3289                                        status_reg);
3290                                retval = handshake(oxu, status_reg,
3291                                           PORT_RESUME, 0, 2000 /* 2msec */);
3292                                if (retval != 0) {
3293                                        oxu_err(oxu,
3294                                                "port %d resume error %d\n",
3295                                                wIndex + 1, retval);
3296                                        goto error;
3297                                }
3298                                temp &= ~(PORT_SUSPEND|PORT_RESUME|(3<<10));
3299                        }
3300                }
3301
3302                /* whoever resets must GetPortStatus to complete it!! */
3303                if ((temp & PORT_RESET)
3304                                && time_after_eq(jiffies,
3305                                        oxu->reset_done[wIndex])) {
3306                        status |= USB_PORT_STAT_C_RESET << 16;
3307                        oxu->reset_done[wIndex] = 0;
3308
3309                        /* force reset to complete */
3310                        writel(temp & ~(PORT_RWC_BITS | PORT_RESET),
3311                                        status_reg);
3312                        /* REVISIT:  some hardware needs 550+ usec to clear
3313                         * this bit; seems too long to spin routinely...
3314                         */
3315                        retval = handshake(oxu, status_reg,
3316                                        PORT_RESET, 0, 750);
3317                        if (retval != 0) {
3318                                oxu_err(oxu, "port %d reset error %d\n",
3319                                        wIndex + 1, retval);
3320                                goto error;
3321                        }
3322
3323                        /* see what we found out */
3324                        temp = check_reset_complete(oxu, wIndex, status_reg,
3325                                        readl(status_reg));
3326                }
3327
3328                /* transfer dedicated ports to the companion hc */
3329                if ((temp & PORT_CONNECT) &&
3330                                test_bit(wIndex, &oxu->companion_ports)) {
3331                        temp &= ~PORT_RWC_BITS;
3332                        temp |= PORT_OWNER;
3333                        writel(temp, status_reg);
3334                        oxu_dbg(oxu, "port %d --> companion\n", wIndex + 1);
3335                        temp = readl(status_reg);
3336                }
3337
3338                /*
3339                 * Even if OWNER is set, there's no harm letting khubd
3340                 * see the wPortStatus values (they should all be 0 except
3341                 * for PORT_POWER anyway).
3342                 */
3343
3344                if (temp & PORT_CONNECT) {
3345                        status |= USB_PORT_STAT_CONNECTION;
3346                        /* status may be from integrated TT */
3347                        status |= oxu_port_speed(oxu, temp);
3348                }
3349                if (temp & PORT_PE)
3350                        status |= USB_PORT_STAT_ENABLE;
3351                if (temp & (PORT_SUSPEND|PORT_RESUME))
3352                        status |= USB_PORT_STAT_SUSPEND;
3353                if (temp & PORT_OC)
3354                        status |= USB_PORT_STAT_OVERCURRENT;
3355                if (temp & PORT_RESET)
3356                        status |= USB_PORT_STAT_RESET;
3357                if (temp & PORT_POWER)
3358                        status |= USB_PORT_STAT_POWER;
3359
3360#ifndef OXU_VERBOSE_DEBUG
3361        if (status & ~0xffff)   /* only if wPortChange is interesting */
3362#endif
3363                dbg_port(oxu, "GetStatus", wIndex + 1, temp);
3364                put_unaligned(cpu_to_le32(status), (__le32 *) buf);
3365                break;
3366        case SetHubFeature:
3367                switch (wValue) {
3368                case C_HUB_LOCAL_POWER:
3369                case C_HUB_OVER_CURRENT:
3370                        /* no hub-wide feature/status flags */
3371                        break;
3372                default:
3373                        goto error;
3374                }
3375                break;
3376        case SetPortFeature:
3377                selector = wIndex >> 8;
3378                wIndex &= 0xff;
3379                if (!wIndex || wIndex > ports)
3380                        goto error;
3381                wIndex--;
3382                temp = readl(status_reg);
3383                if (temp & PORT_OWNER)
3384                        break;
3385
3386                temp &= ~PORT_RWC_BITS;
3387                switch (wValue) {
3388                case USB_PORT_FEAT_SUSPEND:
3389                        if ((temp & PORT_PE) == 0
3390                                        || (temp & PORT_RESET) != 0)
3391                                goto error;
3392                        if (device_may_wakeup(&hcd->self.root_hub->dev))
3393                                temp |= PORT_WAKE_BITS;
3394                        writel(temp | PORT_SUSPEND, status_reg);
3395                        break;
3396                case USB_PORT_FEAT_POWER:
3397                        if (HCS_PPC(oxu->hcs_params))
3398                                writel(temp | PORT_POWER, status_reg);
3399                        break;
3400                case USB_PORT_FEAT_RESET:
3401                        if (temp & PORT_RESUME)
3402                                goto error;
3403                        /* line status bits may report this as low speed,
3404                         * which can be fine if this root hub has a
3405                         * transaction translator built in.
3406                         */
3407                        oxu_vdbg(oxu, "port %d reset\n", wIndex + 1);
3408                        temp |= PORT_RESET;
3409                        temp &= ~PORT_PE;
3410
3411                        /*
3412                         * caller must wait, then call GetPortStatus
3413                         * usb 2.0 spec says 50 ms resets on root
3414                         */
3415                        oxu->reset_done[wIndex] = jiffies
3416                                        + msecs_to_jiffies(50);
3417                        writel(temp, status_reg);
3418                        break;
3419
3420                /* For downstream facing ports (these):  one hub port is put
3421                 * into test mode according to USB2 11.24.2.13, then the hub
3422                 * must be reset (which for root hub now means rmmod+modprobe,
3423                 * or else system reboot).  See EHCI 2.3.9 and 4.14 for info
3424                 * about the EHCI-specific stuff.
3425                 */
3426                case USB_PORT_FEAT_TEST:
3427                        if (!selector || selector > 5)
3428                                goto error;
3429                        ehci_quiesce(oxu);
3430                        ehci_halt(oxu);
3431                        temp |= selector << 16;
3432                        writel(temp, status_reg);
3433                        break;
3434
3435                default:
3436                        goto error;
3437                }
3438                readl(&oxu->regs->command);     /* unblock posted writes */
3439                break;
3440
3441        default:
3442error:
3443                /* "stall" on error */
3444                retval = -EPIPE;
3445        }
3446        spin_unlock_irqrestore(&oxu->lock, flags);
3447        return retval;
3448}
3449
3450#ifdef CONFIG_PM
3451
3452static int oxu_bus_suspend(struct usb_hcd *hcd)
3453{
3454        struct oxu_hcd *oxu = hcd_to_oxu(hcd);
3455        int port;
3456        int mask;
3457
3458        oxu_dbg(oxu, "suspend root hub\n");
3459
3460        if (time_before(jiffies, oxu->next_statechange))
3461                msleep(5);
3462
3463        port = HCS_N_PORTS(oxu->hcs_params);
3464        spin_lock_irq(&oxu->lock);
3465
3466        /* stop schedules, clean any completed work */
3467        if (HC_IS_RUNNING(hcd->state)) {
3468                ehci_quiesce(oxu);
3469                hcd->state = HC_STATE_QUIESCING;
3470        }
3471        oxu->command = readl(&oxu->regs->command);
3472        if (oxu->reclaim)
3473                oxu->reclaim_ready = 1;
3474        ehci_work(oxu);
3475
3476        /* Unlike other USB host controller types, EHCI doesn't have
3477         * any notion of "global" or bus-wide suspend.  The driver has
3478         * to manually suspend all the active unsuspended ports, and
3479         * then manually resume them in the bus_resume() routine.
3480         */
3481        oxu->bus_suspended = 0;
3482        while (port--) {
3483                u32 __iomem *reg = &oxu->regs->port_status[port];
3484                u32 t1 = readl(reg) & ~PORT_RWC_BITS;
3485                u32 t2 = t1;
3486
3487                /* keep track of which ports we suspend */
3488                if ((t1 & PORT_PE) && !(t1 & PORT_OWNER) &&
3489                                !(t1 & PORT_SUSPEND)) {
3490                        t2 |= PORT_SUSPEND;
3491                        set_bit(port, &oxu->bus_suspended);
3492                }
3493
3494                /* enable remote wakeup on all ports */
3495                if (device_may_wakeup(&hcd->self.root_hub->dev))
3496                        t2 |= PORT_WKOC_E|PORT_WKDISC_E|PORT_WKCONN_E;
3497                else
3498                        t2 &= ~(PORT_WKOC_E|PORT_WKDISC_E|PORT_WKCONN_E);
3499
3500                if (t1 != t2) {
3501                        oxu_vdbg(oxu, "port %d, %08x -> %08x\n",
3502                                port + 1, t1, t2);
3503                        writel(t2, reg);
3504                }
3505        }
3506
3507        /* turn off now-idle HC */
3508        del_timer_sync(&oxu->watchdog);
3509        ehci_halt(oxu);
3510        hcd->state = HC_STATE_SUSPENDED;
3511
3512        /* allow remote wakeup */
3513        mask = INTR_MASK;
3514        if (!device_may_wakeup(&hcd->self.root_hub->dev))
3515                mask &= ~STS_PCD;
3516        writel(mask, &oxu->regs->intr_enable);
3517        readl(&oxu->regs->intr_enable);
3518
3519        oxu->next_statechange = jiffies + msecs_to_jiffies(10);
3520        spin_unlock_irq(&oxu->lock);
3521        return 0;
3522}
3523
3524/* Caller has locked the root hub, and should reset/reinit on error */
3525static int oxu_bus_resume(struct usb_hcd *hcd)
3526{
3527        struct oxu_hcd *oxu = hcd_to_oxu(hcd);
3528        u32 temp;
3529        int i;
3530
3531        if (time_before(jiffies, oxu->next_statechange))
3532                msleep(5);
3533        spin_lock_irq(&oxu->lock);
3534
3535        /* Ideally and we've got a real resume here, and no port's power
3536         * was lost.  (For PCI, that means Vaux was maintained.)  But we
3537         * could instead be restoring a swsusp snapshot -- so that BIOS was
3538         * the last user of the controller, not reset/pm hardware keeping
3539         * state we gave to it.
3540         */
3541        temp = readl(&oxu->regs->intr_enable);
3542        oxu_dbg(oxu, "resume root hub%s\n", temp ? "" : " after power loss");
3543
3544        /* at least some APM implementations will try to deliver
3545         * IRQs right away, so delay them until we're ready.
3546         */
3547        writel(0, &oxu->regs->intr_enable);
3548
3549        /* re-init operational registers */
3550        writel(0, &oxu->regs->segment);
3551        writel(oxu->periodic_dma, &oxu->regs->frame_list);
3552        writel((u32) oxu->async->qh_dma, &oxu->regs->async_next);
3553
3554        /* restore CMD_RUN, framelist size, and irq threshold */
3555        writel(oxu->command, &oxu->regs->command);
3556
3557        /* Some controller/firmware combinations need a delay during which
3558         * they set up the port statuses.  See Bugzilla #8190. */
3559        mdelay(8);
3560
3561        /* manually resume the ports we suspended during bus_suspend() */
3562        i = HCS_N_PORTS(oxu->hcs_params);
3563        while (i--) {
3564                temp = readl(&oxu->regs->port_status[i]);
3565                temp &= ~(PORT_RWC_BITS
3566                        | PORT_WKOC_E | PORT_WKDISC_E | PORT_WKCONN_E);
3567                if (test_bit(i, &oxu->bus_suspended) && (temp & PORT_SUSPEND)) {
3568                        oxu->reset_done[i] = jiffies + msecs_to_jiffies(20);
3569                        temp |= PORT_RESUME;
3570                }
3571                writel(temp, &oxu->regs->port_status[i]);
3572        }
3573        i = HCS_N_PORTS(oxu->hcs_params);
3574        mdelay(20);
3575        while (i--) {
3576                temp = readl(&oxu->regs->port_status[i]);
3577                if (test_bit(i, &oxu->bus_suspended) && (temp & PORT_SUSPEND)) {
3578                        temp &= ~(PORT_RWC_BITS | PORT_RESUME);
3579                        writel(temp, &oxu->regs->port_status[i]);
3580                        oxu_vdbg(oxu, "resumed port %d\n", i + 1);
3581                }
3582        }
3583        (void) readl(&oxu->regs->command);
3584
3585        /* maybe re-activate the schedule(s) */
3586        temp = 0;
3587        if (oxu->async->qh_next.qh)
3588                temp |= CMD_ASE;
3589        if (oxu->periodic_sched)
3590                temp |= CMD_PSE;
3591        if (temp) {
3592                oxu->command |= temp;
3593                writel(oxu->command, &oxu->regs->command);
3594        }
3595
3596        oxu->next_statechange = jiffies + msecs_to_jiffies(5);
3597        hcd->state = HC_STATE_RUNNING;
3598
3599        /* Now we can safely re-enable irqs */
3600        writel(INTR_MASK, &oxu->regs->intr_enable);
3601
3602        spin_unlock_irq(&oxu->lock);
3603        return 0;
3604}
3605
3606#else
3607
3608static int oxu_bus_suspend(struct usb_hcd *hcd)
3609{
3610        return 0;
3611}
3612
3613static int oxu_bus_resume(struct usb_hcd *hcd)
3614{
3615        return 0;
3616}
3617
3618#endif  /* CONFIG_PM */
3619
3620static const struct hc_driver oxu_hc_driver = {
3621        .description =          "oxu210hp_hcd",
3622        .product_desc =         "oxu210hp HCD",
3623        .hcd_priv_size =        sizeof(struct oxu_hcd),
3624
3625        /*
3626         * Generic hardware linkage
3627         */
3628        .irq =                  oxu_irq,
3629        .flags =                HCD_MEMORY | HCD_USB2,
3630
3631        /*
3632         * Basic lifecycle operations
3633         */
3634        .reset =                oxu_reset,
3635        .start =                oxu_run,
3636        .stop =                 oxu_stop,
3637        .shutdown =             oxu_shutdown,
3638
3639        /*
3640         * Managing i/o requests and associated device resources
3641         */
3642        .urb_enqueue =          oxu_urb_enqueue,
3643        .urb_dequeue =          oxu_urb_dequeue,
3644        .endpoint_disable =     oxu_endpoint_disable,
3645
3646        /*
3647         * Scheduling support
3648         */
3649        .get_frame_number =     oxu_get_frame,
3650
3651        /*
3652         * Root hub support
3653         */
3654        .hub_status_data =      oxu_hub_status_data,
3655        .hub_control =          oxu_hub_control,
3656        .bus_suspend =          oxu_bus_suspend,
3657        .bus_resume =           oxu_bus_resume,
3658};
3659
3660/*
3661 * Module stuff
3662 */
3663
3664static void oxu_configuration(struct platform_device *pdev, void *base)
3665{
3666        u32 tmp;
3667
3668        /* Initialize top level registers.
3669         * First write ever
3670         */
3671        oxu_writel(base, OXU_HOSTIFCONFIG, 0x0000037D);
3672        oxu_writel(base, OXU_SOFTRESET, OXU_SRESET);
3673        oxu_writel(base, OXU_HOSTIFCONFIG, 0x0000037D);
3674
3675        tmp = oxu_readl(base, OXU_PIOBURSTREADCTRL);
3676        oxu_writel(base, OXU_PIOBURSTREADCTRL, tmp | 0x0040);
3677
3678        oxu_writel(base, OXU_ASO, OXU_SPHPOEN | OXU_OVRCCURPUPDEN |
3679                                        OXU_COMPARATOR | OXU_ASO_OP);
3680
3681        tmp = oxu_readl(base, OXU_CLKCTRL_SET);
3682        oxu_writel(base, OXU_CLKCTRL_SET, tmp | OXU_SYSCLKEN | OXU_USBOTGCLKEN);
3683
3684        /* Clear all top interrupt enable */
3685        oxu_writel(base, OXU_CHIPIRQEN_CLR, 0xff);
3686
3687        /* Clear all top interrupt status */
3688        oxu_writel(base, OXU_CHIPIRQSTATUS, 0xff);
3689
3690        /* Enable all needed top interrupt except OTG SPH core */
3691        oxu_writel(base, OXU_CHIPIRQEN_SET, OXU_USBSPHLPWUI | OXU_USBOTGLPWUI);
3692}
3693
3694static int oxu_verify_id(struct platform_device *pdev, void *base)
3695{
3696        u32 id;
3697        static const char * const bo[] = {
3698                "reserved",
3699                "128-pin LQFP",
3700                "84-pin TFBGA",
3701                "reserved",
3702        };
3703
3704        /* Read controller signature register to find a match */
3705        id = oxu_readl(base, OXU_DEVICEID);
3706        dev_info(&pdev->dev, "device ID %x\n", id);
3707        if ((id & OXU_REV_MASK) != (OXU_REV_2100 << OXU_REV_SHIFT))
3708                return -1;
3709
3710        dev_info(&pdev->dev, "found device %x %s (%04x:%04x)\n",
3711                id >> OXU_REV_SHIFT,
3712                bo[(id & OXU_BO_MASK) >> OXU_BO_SHIFT],
3713                (id & OXU_MAJ_REV_MASK) >> OXU_MAJ_REV_SHIFT,
3714                (id & OXU_MIN_REV_MASK) >> OXU_MIN_REV_SHIFT);
3715
3716        return 0;
3717}
3718
3719static const struct hc_driver oxu_hc_driver;
3720static struct usb_hcd *oxu_create(struct platform_device *pdev,
3721                                unsigned long memstart, unsigned long memlen,
3722                                void *base, int irq, int otg)
3723{
3724        struct device *dev = &pdev->dev;
3725
3726        struct usb_hcd *hcd;
3727        struct oxu_hcd *oxu;
3728        int ret;
3729
3730        /* Set endian mode and host mode */
3731        oxu_writel(base + (otg ? OXU_OTG_CORE_OFFSET : OXU_SPH_CORE_OFFSET),
3732                                OXU_USBMODE,
3733                                OXU_CM_HOST_ONLY | OXU_ES_LITTLE | OXU_VBPS);
3734
3735        hcd = usb_create_hcd(&oxu_hc_driver, dev,
3736                                otg ? "oxu210hp_otg" : "oxu210hp_sph");
3737        if (!hcd)
3738                return ERR_PTR(-ENOMEM);
3739
3740        hcd->rsrc_start = memstart;
3741        hcd->rsrc_len = memlen;
3742        hcd->regs = base;
3743        hcd->irq = irq;
3744        hcd->state = HC_STATE_HALT;
3745
3746        oxu = hcd_to_oxu(hcd);
3747        oxu->is_otg = otg;
3748
3749        ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
3750        if (ret < 0)
3751                return ERR_PTR(ret);
3752
3753        return hcd;
3754}
3755
3756static int oxu_init(struct platform_device *pdev,
3757                                unsigned long memstart, unsigned long memlen,
3758                                void *base, int irq)
3759{
3760        struct oxu_info *info = platform_get_drvdata(pdev);
3761        struct usb_hcd *hcd;
3762        int ret;
3763
3764        /* First time configuration at start up */
3765        oxu_configuration(pdev, base);
3766
3767        ret = oxu_verify_id(pdev, base);
3768        if (ret) {
3769                dev_err(&pdev->dev, "no devices found!\n");
3770                return -ENODEV;
3771        }
3772
3773        /* Create the OTG controller */
3774        hcd = oxu_create(pdev, memstart, memlen, base, irq, 1);
3775        if (IS_ERR(hcd)) {
3776                dev_err(&pdev->dev, "cannot create OTG controller!\n");
3777                ret = PTR_ERR(hcd);
3778                goto error_create_otg;
3779        }
3780        info->hcd[0] = hcd;
3781
3782        /* Create the SPH host controller */
3783        hcd = oxu_create(pdev, memstart, memlen, base, irq, 0);
3784        if (IS_ERR(hcd)) {
3785                dev_err(&pdev->dev, "cannot create SPH controller!\n");
3786                ret = PTR_ERR(hcd);
3787                goto error_create_sph;
3788        }
3789        info->hcd[1] = hcd;
3790
3791        oxu_writel(base, OXU_CHIPIRQEN_SET,
3792                oxu_readl(base, OXU_CHIPIRQEN_SET) | 3);
3793
3794        return 0;
3795
3796error_create_sph:
3797        usb_remove_hcd(info->hcd[0]);
3798        usb_put_hcd(info->hcd[0]);
3799
3800error_create_otg:
3801        return ret;
3802}
3803
3804static int oxu_drv_probe(struct platform_device *pdev)
3805{
3806        struct resource *res;
3807        void *base;
3808        unsigned long memstart, memlen;
3809        int irq, ret;
3810        struct oxu_info *info;
3811
3812        if (usb_disabled())
3813                return -ENODEV;
3814
3815        /*
3816         * Get the platform resources
3817         */
3818        res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
3819        if (!res) {
3820                dev_err(&pdev->dev,
3821                        "no IRQ! Check %s setup!\n", dev_name(&pdev->dev));
3822                return -ENODEV;
3823        }
3824        irq = res->start;
3825        dev_dbg(&pdev->dev, "IRQ resource %d\n", irq);
3826
3827        res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
3828        if (!res) {
3829                dev_err(&pdev->dev, "no registers address! Check %s setup!\n",
3830                        dev_name(&pdev->dev));
3831                return -ENODEV;
3832        }
3833        memstart = res->start;
3834        memlen = resource_size(res);
3835        dev_dbg(&pdev->dev, "MEM resource %lx-%lx\n", memstart, memlen);
3836        if (!request_mem_region(memstart, memlen,
3837                                oxu_hc_driver.description)) {
3838                dev_dbg(&pdev->dev, "memory area already in use\n");
3839                return -EBUSY;
3840        }
3841
3842        ret = irq_set_irq_type(irq, IRQF_TRIGGER_FALLING);
3843        if (ret) {
3844                dev_err(&pdev->dev, "error setting irq type\n");
3845                ret = -EFAULT;
3846                goto error_set_irq_type;
3847        }
3848
3849        base = ioremap(memstart, memlen);
3850        if (!base) {
3851                dev_dbg(&pdev->dev, "error mapping memory\n");
3852                ret = -EFAULT;
3853                goto error_ioremap;
3854        }
3855
3856        /* Allocate a driver data struct to hold useful info for both
3857         * SPH & OTG devices
3858         */
3859        info = kzalloc(sizeof(struct oxu_info), GFP_KERNEL);
3860        if (!info) {
3861                dev_dbg(&pdev->dev, "error allocating memory\n");
3862                ret = -EFAULT;
3863                goto error_alloc;
3864        }
3865        platform_set_drvdata(pdev, info);
3866
3867        ret = oxu_init(pdev, memstart, memlen, base, irq);
3868        if (ret < 0) {
3869                dev_dbg(&pdev->dev, "cannot init USB devices\n");
3870                goto error_init;
3871        }
3872
3873        dev_info(&pdev->dev, "devices enabled and running\n");
3874        platform_set_drvdata(pdev, info);
3875
3876        return 0;
3877
3878error_init:
3879        kfree(info);
3880        platform_set_drvdata(pdev, NULL);
3881
3882error_alloc:
3883        iounmap(base);
3884
3885error_set_irq_type:
3886error_ioremap:
3887        release_mem_region(memstart, memlen);
3888
3889        dev_err(&pdev->dev, "init %s fail, %d\n", dev_name(&pdev->dev), ret);
3890        return ret;
3891}
3892
3893static void oxu_remove(struct platform_device *pdev, struct usb_hcd *hcd)
3894{
3895        usb_remove_hcd(hcd);
3896        usb_put_hcd(hcd);
3897}
3898
3899static int oxu_drv_remove(struct platform_device *pdev)
3900{
3901        struct oxu_info *info = platform_get_drvdata(pdev);
3902        unsigned long memstart = info->hcd[0]->rsrc_start,
3903                        memlen = info->hcd[0]->rsrc_len;
3904        void *base = info->hcd[0]->regs;
3905
3906        oxu_remove(pdev, info->hcd[0]);
3907        oxu_remove(pdev, info->hcd[1]);
3908
3909        iounmap(base);
3910        release_mem_region(memstart, memlen);
3911
3912        kfree(info);
3913        platform_set_drvdata(pdev, NULL);
3914
3915        return 0;
3916}
3917
3918static void oxu_drv_shutdown(struct platform_device *pdev)
3919{
3920        oxu_drv_remove(pdev);
3921}
3922
3923#if 0
3924/* FIXME: TODO */
3925static int oxu_drv_suspend(struct device *dev)
3926{
3927        struct platform_device *pdev = to_platform_device(dev);
3928        struct usb_hcd *hcd = dev_get_drvdata(dev);
3929
3930        return 0;
3931}
3932
3933static int oxu_drv_resume(struct device *dev)
3934{
3935        struct platform_device *pdev = to_platform_device(dev);
3936        struct usb_hcd *hcd = dev_get_drvdata(dev);
3937
3938        return 0;
3939}
3940#else
3941#define oxu_drv_suspend NULL
3942#define oxu_drv_resume  NULL
3943#endif
3944
3945static struct platform_driver oxu_driver = {
3946        .probe          = oxu_drv_probe,
3947        .remove         = oxu_drv_remove,
3948        .shutdown       = oxu_drv_shutdown,
3949        .suspend        = oxu_drv_suspend,
3950        .resume         = oxu_drv_resume,
3951        .driver = {
3952                .name = "oxu210hp-hcd",
3953                .bus = &platform_bus_type
3954        }
3955};
3956
3957module_platform_driver(oxu_driver);
3958
3959MODULE_DESCRIPTION("Oxford OXU210HP HCD driver - ver. " DRIVER_VERSION);
3960MODULE_AUTHOR("Rodolfo Giometti <giometti@linux.it>");
3961MODULE_LICENSE("GPL");
3962