linux/include/uapi/linux/firewire-cdev.h
<<
>>
Prefs
   1/*
   2 * Char device interface.
   3 *
   4 * Copyright (C) 2005-2007  Kristian Hoegsberg <krh@bitplanet.net>
   5 *
   6 * Permission is hereby granted, free of charge, to any person obtaining a
   7 * copy of this software and associated documentation files (the "Software"),
   8 * to deal in the Software without restriction, including without limitation
   9 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
  10 * and/or sell copies of the Software, and to permit persons to whom the
  11 * Software is furnished to do so, subject to the following conditions:
  12 *
  13 * The above copyright notice and this permission notice (including the next
  14 * paragraph) shall be included in all copies or substantial portions of the
  15 * Software.
  16 *
  17 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
  18 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
  19 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
  20 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
  21 * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
  22 * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
  23 * DEALINGS IN THE SOFTWARE.
  24 */
  25
  26#ifndef _LINUX_FIREWIRE_CDEV_H
  27#define _LINUX_FIREWIRE_CDEV_H
  28
  29#include <linux/ioctl.h>
  30#include <linux/types.h>
  31#include <linux/firewire-constants.h>
  32
  33/* available since kernel version 2.6.22 */
  34#define FW_CDEV_EVENT_BUS_RESET                         0x00
  35#define FW_CDEV_EVENT_RESPONSE                          0x01
  36#define FW_CDEV_EVENT_REQUEST                           0x02
  37#define FW_CDEV_EVENT_ISO_INTERRUPT                     0x03
  38
  39/* available since kernel version 2.6.30 */
  40#define FW_CDEV_EVENT_ISO_RESOURCE_ALLOCATED            0x04
  41#define FW_CDEV_EVENT_ISO_RESOURCE_DEALLOCATED          0x05
  42
  43/* available since kernel version 2.6.36 */
  44#define FW_CDEV_EVENT_REQUEST2                          0x06
  45#define FW_CDEV_EVENT_PHY_PACKET_SENT                   0x07
  46#define FW_CDEV_EVENT_PHY_PACKET_RECEIVED               0x08
  47#define FW_CDEV_EVENT_ISO_INTERRUPT_MULTICHANNEL        0x09
  48
  49/**
  50 * struct fw_cdev_event_common - Common part of all fw_cdev_event_ types
  51 * @closure:    For arbitrary use by userspace
  52 * @type:       Discriminates the fw_cdev_event_ types
  53 *
  54 * This struct may be used to access generic members of all fw_cdev_event_
  55 * types regardless of the specific type.
  56 *
  57 * Data passed in the @closure field for a request will be returned in the
  58 * corresponding event.  It is big enough to hold a pointer on all platforms.
  59 * The ioctl used to set @closure depends on the @type of event.
  60 */
  61struct fw_cdev_event_common {
  62        __u64 closure;
  63        __u32 type;
  64};
  65
  66/**
  67 * struct fw_cdev_event_bus_reset - Sent when a bus reset occurred
  68 * @closure:    See &fw_cdev_event_common; set by %FW_CDEV_IOC_GET_INFO ioctl
  69 * @type:       See &fw_cdev_event_common; always %FW_CDEV_EVENT_BUS_RESET
  70 * @node_id:       New node ID of this node
  71 * @local_node_id: Node ID of the local node, i.e. of the controller
  72 * @bm_node_id:    Node ID of the bus manager
  73 * @irm_node_id:   Node ID of the iso resource manager
  74 * @root_node_id:  Node ID of the root node
  75 * @generation:    New bus generation
  76 *
  77 * This event is sent when the bus the device belongs to goes through a bus
  78 * reset.  It provides information about the new bus configuration, such as
  79 * new node ID for this device, new root ID, and others.
  80 *
  81 * If @bm_node_id is 0xffff right after bus reset it can be reread by an
  82 * %FW_CDEV_IOC_GET_INFO ioctl after bus manager selection was finished.
  83 * Kernels with ABI version < 4 do not set @bm_node_id.
  84 */
  85struct fw_cdev_event_bus_reset {
  86        __u64 closure;
  87        __u32 type;
  88        __u32 node_id;
  89        __u32 local_node_id;
  90        __u32 bm_node_id;
  91        __u32 irm_node_id;
  92        __u32 root_node_id;
  93        __u32 generation;
  94};
  95
  96/**
  97 * struct fw_cdev_event_response - Sent when a response packet was received
  98 * @closure:    See &fw_cdev_event_common; set by %FW_CDEV_IOC_SEND_REQUEST
  99 *              or %FW_CDEV_IOC_SEND_BROADCAST_REQUEST
 100 *              or %FW_CDEV_IOC_SEND_STREAM_PACKET ioctl
 101 * @type:       See &fw_cdev_event_common; always %FW_CDEV_EVENT_RESPONSE
 102 * @rcode:      Response code returned by the remote node
 103 * @length:     Data length, i.e. the response's payload size in bytes
 104 * @data:       Payload data, if any
 105 *
 106 * This event is sent when the stack receives a response to an outgoing request
 107 * sent by %FW_CDEV_IOC_SEND_REQUEST ioctl.  The payload data for responses
 108 * carrying data (read and lock responses) follows immediately and can be
 109 * accessed through the @data field.
 110 *
 111 * The event is also generated after conclusions of transactions that do not
 112 * involve response packets.  This includes unified write transactions,
 113 * broadcast write transactions, and transmission of asynchronous stream
 114 * packets.  @rcode indicates success or failure of such transmissions.
 115 */
 116struct fw_cdev_event_response {
 117        __u64 closure;
 118        __u32 type;
 119        __u32 rcode;
 120        __u32 length;
 121        __u32 data[0];
 122};
 123
 124/**
 125 * struct fw_cdev_event_request - Old version of &fw_cdev_event_request2
 126 * @type:       See &fw_cdev_event_common; always %FW_CDEV_EVENT_REQUEST
 127 *
 128 * This event is sent instead of &fw_cdev_event_request2 if the kernel or
 129 * the client implements ABI version <= 3.  &fw_cdev_event_request lacks
 130 * essential information; use &fw_cdev_event_request2 instead.
 131 */
 132struct fw_cdev_event_request {
 133        __u64 closure;
 134        __u32 type;
 135        __u32 tcode;
 136        __u64 offset;
 137        __u32 handle;
 138        __u32 length;
 139        __u32 data[0];
 140};
 141
 142/**
 143 * struct fw_cdev_event_request2 - Sent on incoming request to an address region
 144 * @closure:    See &fw_cdev_event_common; set by %FW_CDEV_IOC_ALLOCATE ioctl
 145 * @type:       See &fw_cdev_event_common; always %FW_CDEV_EVENT_REQUEST2
 146 * @tcode:      Transaction code of the incoming request
 147 * @offset:     The offset into the 48-bit per-node address space
 148 * @source_node_id: Sender node ID
 149 * @destination_node_id: Destination node ID
 150 * @card:       The index of the card from which the request came
 151 * @generation: Bus generation in which the request is valid
 152 * @handle:     Reference to the kernel-side pending request
 153 * @length:     Data length, i.e. the request's payload size in bytes
 154 * @data:       Incoming data, if any
 155 *
 156 * This event is sent when the stack receives an incoming request to an address
 157 * region registered using the %FW_CDEV_IOC_ALLOCATE ioctl.  The request is
 158 * guaranteed to be completely contained in the specified region.  Userspace is
 159 * responsible for sending the response by %FW_CDEV_IOC_SEND_RESPONSE ioctl,
 160 * using the same @handle.
 161 *
 162 * The payload data for requests carrying data (write and lock requests)
 163 * follows immediately and can be accessed through the @data field.
 164 *
 165 * Unlike &fw_cdev_event_request, @tcode of lock requests is one of the
 166 * firewire-core specific %TCODE_LOCK_MASK_SWAP...%TCODE_LOCK_VENDOR_DEPENDENT,
 167 * i.e. encodes the extended transaction code.
 168 *
 169 * @card may differ from &fw_cdev_get_info.card because requests are received
 170 * from all cards of the Linux host.  @source_node_id, @destination_node_id, and
 171 * @generation pertain to that card.  Destination node ID and bus generation may
 172 * therefore differ from the corresponding fields of the last
 173 * &fw_cdev_event_bus_reset.
 174 *
 175 * @destination_node_id may also differ from the current node ID because of a
 176 * non-local bus ID part or in case of a broadcast write request.  Note, a
 177 * client must call an %FW_CDEV_IOC_SEND_RESPONSE ioctl even in case of a
 178 * broadcast write request; the kernel will then release the kernel-side pending
 179 * request but will not actually send a response packet.
 180 *
 181 * In case of a write request to FCP_REQUEST or FCP_RESPONSE, the kernel already
 182 * sent a write response immediately after the request was received; in this
 183 * case the client must still call an %FW_CDEV_IOC_SEND_RESPONSE ioctl to
 184 * release the kernel-side pending request, though another response won't be
 185 * sent.
 186 *
 187 * If the client subsequently needs to initiate requests to the sender node of
 188 * an &fw_cdev_event_request2, it needs to use a device file with matching
 189 * card index, node ID, and generation for outbound requests.
 190 */
 191struct fw_cdev_event_request2 {
 192        __u64 closure;
 193        __u32 type;
 194        __u32 tcode;
 195        __u64 offset;
 196        __u32 source_node_id;
 197        __u32 destination_node_id;
 198        __u32 card;
 199        __u32 generation;
 200        __u32 handle;
 201        __u32 length;
 202        __u32 data[0];
 203};
 204
 205/**
 206 * struct fw_cdev_event_iso_interrupt - Sent when an iso packet was completed
 207 * @closure:    See &fw_cdev_event_common;
 208 *              set by %FW_CDEV_CREATE_ISO_CONTEXT ioctl
 209 * @type:       See &fw_cdev_event_common; always %FW_CDEV_EVENT_ISO_INTERRUPT
 210 * @cycle:      Cycle counter of the last completed packet
 211 * @header_length: Total length of following headers, in bytes
 212 * @header:     Stripped headers, if any
 213 *
 214 * This event is sent when the controller has completed an &fw_cdev_iso_packet
 215 * with the %FW_CDEV_ISO_INTERRUPT bit set, when explicitly requested with
 216 * %FW_CDEV_IOC_FLUSH_ISO, or when there have been so many completed packets
 217 * without the interrupt bit set that the kernel's internal buffer for @header
 218 * is about to overflow.  (In the last case, ABI versions < 5 drop header data
 219 * up to the next interrupt packet.)
 220 *
 221 * Isochronous transmit events (context type %FW_CDEV_ISO_CONTEXT_TRANSMIT):
 222 *
 223 * In version 3 and some implementations of version 2 of the ABI, &header_length
 224 * is a multiple of 4 and &header contains timestamps of all packets up until
 225 * the interrupt packet.  The format of the timestamps is as described below for
 226 * isochronous reception.  In version 1 of the ABI, &header_length was 0.
 227 *
 228 * Isochronous receive events (context type %FW_CDEV_ISO_CONTEXT_RECEIVE):
 229 *
 230 * The headers stripped of all packets up until and including the interrupt
 231 * packet are returned in the @header field.  The amount of header data per
 232 * packet is as specified at iso context creation by
 233 * &fw_cdev_create_iso_context.header_size.
 234 *
 235 * Hence, _interrupt.header_length / _context.header_size is the number of
 236 * packets received in this interrupt event.  The client can now iterate
 237 * through the mmap()'ed DMA buffer according to this number of packets and
 238 * to the buffer sizes as the client specified in &fw_cdev_queue_iso.
 239 *
 240 * Since version 2 of this ABI, the portion for each packet in _interrupt.header
 241 * consists of the 1394 isochronous packet header, followed by a timestamp
 242 * quadlet if &fw_cdev_create_iso_context.header_size > 4, followed by quadlets
 243 * from the packet payload if &fw_cdev_create_iso_context.header_size > 8.
 244 *
 245 * Format of 1394 iso packet header:  16 bits data_length, 2 bits tag, 6 bits
 246 * channel, 4 bits tcode, 4 bits sy, in big endian byte order.
 247 * data_length is the actual received size of the packet without the four
 248 * 1394 iso packet header bytes.
 249 *
 250 * Format of timestamp:  16 bits invalid, 3 bits cycleSeconds, 13 bits
 251 * cycleCount, in big endian byte order.
 252 *
 253 * In version 1 of the ABI, no timestamp quadlet was inserted; instead, payload
 254 * data followed directly after the 1394 is header if header_size > 4.
 255 * Behaviour of ver. 1 of this ABI is no longer available since ABI ver. 2.
 256 */
 257struct fw_cdev_event_iso_interrupt {
 258        __u64 closure;
 259        __u32 type;
 260        __u32 cycle;
 261        __u32 header_length;
 262        __u32 header[0];
 263};
 264
 265/**
 266 * struct fw_cdev_event_iso_interrupt_mc - An iso buffer chunk was completed
 267 * @closure:    See &fw_cdev_event_common;
 268 *              set by %FW_CDEV_CREATE_ISO_CONTEXT ioctl
 269 * @type:       %FW_CDEV_EVENT_ISO_INTERRUPT_MULTICHANNEL
 270 * @completed:  Offset into the receive buffer; data before this offset is valid
 271 *
 272 * This event is sent in multichannel contexts (context type
 273 * %FW_CDEV_ISO_CONTEXT_RECEIVE_MULTICHANNEL) for &fw_cdev_iso_packet buffer
 274 * chunks that have been completely filled and that have the
 275 * %FW_CDEV_ISO_INTERRUPT bit set, or when explicitly requested with
 276 * %FW_CDEV_IOC_FLUSH_ISO.
 277 *
 278 * The buffer is continuously filled with the following data, per packet:
 279 *  - the 1394 iso packet header as described at &fw_cdev_event_iso_interrupt,
 280 *    but in little endian byte order,
 281 *  - packet payload (as many bytes as specified in the data_length field of
 282 *    the 1394 iso packet header) in big endian byte order,
 283 *  - 0...3 padding bytes as needed to align the following trailer quadlet,
 284 *  - trailer quadlet, containing the reception timestamp as described at
 285 *    &fw_cdev_event_iso_interrupt, but in little endian byte order.
 286 *
 287 * Hence the per-packet size is data_length (rounded up to a multiple of 4) + 8.
 288 * When processing the data, stop before a packet that would cross the
 289 * @completed offset.
 290 *
 291 * A packet near the end of a buffer chunk will typically spill over into the
 292 * next queued buffer chunk.  It is the responsibility of the client to check
 293 * for this condition, assemble a broken-up packet from its parts, and not to
 294 * re-queue any buffer chunks in which as yet unread packet parts reside.
 295 */
 296struct fw_cdev_event_iso_interrupt_mc {
 297        __u64 closure;
 298        __u32 type;
 299        __u32 completed;
 300};
 301
 302/**
 303 * struct fw_cdev_event_iso_resource - Iso resources were allocated or freed
 304 * @closure:    See &fw_cdev_event_common;
 305 *              set by %FW_CDEV_IOC_(DE)ALLOCATE_ISO_RESOURCE(_ONCE) ioctl
 306 * @type:       %FW_CDEV_EVENT_ISO_RESOURCE_ALLOCATED or
 307 *              %FW_CDEV_EVENT_ISO_RESOURCE_DEALLOCATED
 308 * @handle:     Reference by which an allocated resource can be deallocated
 309 * @channel:    Isochronous channel which was (de)allocated, if any
 310 * @bandwidth:  Bandwidth allocation units which were (de)allocated, if any
 311 *
 312 * An %FW_CDEV_EVENT_ISO_RESOURCE_ALLOCATED event is sent after an isochronous
 313 * resource was allocated at the IRM.  The client has to check @channel and
 314 * @bandwidth for whether the allocation actually succeeded.
 315 *
 316 * An %FW_CDEV_EVENT_ISO_RESOURCE_DEALLOCATED event is sent after an isochronous
 317 * resource was deallocated at the IRM.  It is also sent when automatic
 318 * reallocation after a bus reset failed.
 319 *
 320 * @channel is <0 if no channel was (de)allocated or if reallocation failed.
 321 * @bandwidth is 0 if no bandwidth was (de)allocated or if reallocation failed.
 322 */
 323struct fw_cdev_event_iso_resource {
 324        __u64 closure;
 325        __u32 type;
 326        __u32 handle;
 327        __s32 channel;
 328        __s32 bandwidth;
 329};
 330
 331/**
 332 * struct fw_cdev_event_phy_packet - A PHY packet was transmitted or received
 333 * @closure:    See &fw_cdev_event_common; set by %FW_CDEV_IOC_SEND_PHY_PACKET
 334 *              or %FW_CDEV_IOC_RECEIVE_PHY_PACKETS ioctl
 335 * @type:       %FW_CDEV_EVENT_PHY_PACKET_SENT or %..._RECEIVED
 336 * @rcode:      %RCODE_..., indicates success or failure of transmission
 337 * @length:     Data length in bytes
 338 * @data:       Incoming data
 339 *
 340 * If @type is %FW_CDEV_EVENT_PHY_PACKET_SENT, @length is 0 and @data empty,
 341 * except in case of a ping packet:  Then, @length is 4, and @data[0] is the
 342 * ping time in 49.152MHz clocks if @rcode is %RCODE_COMPLETE.
 343 *
 344 * If @type is %FW_CDEV_EVENT_PHY_PACKET_RECEIVED, @length is 8 and @data
 345 * consists of the two PHY packet quadlets, in host byte order.
 346 */
 347struct fw_cdev_event_phy_packet {
 348        __u64 closure;
 349        __u32 type;
 350        __u32 rcode;
 351        __u32 length;
 352        __u32 data[0];
 353};
 354
 355/**
 356 * union fw_cdev_event - Convenience union of fw_cdev_event_ types
 357 * @common:             Valid for all types
 358 * @bus_reset:          Valid if @common.type == %FW_CDEV_EVENT_BUS_RESET
 359 * @response:           Valid if @common.type == %FW_CDEV_EVENT_RESPONSE
 360 * @request:            Valid if @common.type == %FW_CDEV_EVENT_REQUEST
 361 * @request2:           Valid if @common.type == %FW_CDEV_EVENT_REQUEST2
 362 * @iso_interrupt:      Valid if @common.type == %FW_CDEV_EVENT_ISO_INTERRUPT
 363 * @iso_interrupt_mc:   Valid if @common.type ==
 364 *                              %FW_CDEV_EVENT_ISO_INTERRUPT_MULTICHANNEL
 365 * @iso_resource:       Valid if @common.type ==
 366 *                              %FW_CDEV_EVENT_ISO_RESOURCE_ALLOCATED or
 367 *                              %FW_CDEV_EVENT_ISO_RESOURCE_DEALLOCATED
 368 * @phy_packet:         Valid if @common.type ==
 369 *                              %FW_CDEV_EVENT_PHY_PACKET_SENT or
 370 *                              %FW_CDEV_EVENT_PHY_PACKET_RECEIVED
 371 *
 372 * Convenience union for userspace use.  Events could be read(2) into an
 373 * appropriately aligned char buffer and then cast to this union for further
 374 * processing.  Note that for a request, response or iso_interrupt event,
 375 * the data[] or header[] may make the size of the full event larger than
 376 * sizeof(union fw_cdev_event).  Also note that if you attempt to read(2)
 377 * an event into a buffer that is not large enough for it, the data that does
 378 * not fit will be discarded so that the next read(2) will return a new event.
 379 */
 380union fw_cdev_event {
 381        struct fw_cdev_event_common             common;
 382        struct fw_cdev_event_bus_reset          bus_reset;
 383        struct fw_cdev_event_response           response;
 384        struct fw_cdev_event_request            request;
 385        struct fw_cdev_event_request2           request2;               /* added in 2.6.36 */
 386        struct fw_cdev_event_iso_interrupt      iso_interrupt;
 387        struct fw_cdev_event_iso_interrupt_mc   iso_interrupt_mc;       /* added in 2.6.36 */
 388        struct fw_cdev_event_iso_resource       iso_resource;           /* added in 2.6.30 */
 389        struct fw_cdev_event_phy_packet         phy_packet;             /* added in 2.6.36 */
 390};
 391
 392/* available since kernel version 2.6.22 */
 393#define FW_CDEV_IOC_GET_INFO           _IOWR('#', 0x00, struct fw_cdev_get_info)
 394#define FW_CDEV_IOC_SEND_REQUEST        _IOW('#', 0x01, struct fw_cdev_send_request)
 395#define FW_CDEV_IOC_ALLOCATE           _IOWR('#', 0x02, struct fw_cdev_allocate)
 396#define FW_CDEV_IOC_DEALLOCATE          _IOW('#', 0x03, struct fw_cdev_deallocate)
 397#define FW_CDEV_IOC_SEND_RESPONSE       _IOW('#', 0x04, struct fw_cdev_send_response)
 398#define FW_CDEV_IOC_INITIATE_BUS_RESET  _IOW('#', 0x05, struct fw_cdev_initiate_bus_reset)
 399#define FW_CDEV_IOC_ADD_DESCRIPTOR     _IOWR('#', 0x06, struct fw_cdev_add_descriptor)
 400#define FW_CDEV_IOC_REMOVE_DESCRIPTOR   _IOW('#', 0x07, struct fw_cdev_remove_descriptor)
 401#define FW_CDEV_IOC_CREATE_ISO_CONTEXT _IOWR('#', 0x08, struct fw_cdev_create_iso_context)
 402#define FW_CDEV_IOC_QUEUE_ISO          _IOWR('#', 0x09, struct fw_cdev_queue_iso)
 403#define FW_CDEV_IOC_START_ISO           _IOW('#', 0x0a, struct fw_cdev_start_iso)
 404#define FW_CDEV_IOC_STOP_ISO            _IOW('#', 0x0b, struct fw_cdev_stop_iso)
 405
 406/* available since kernel version 2.6.24 */
 407#define FW_CDEV_IOC_GET_CYCLE_TIMER     _IOR('#', 0x0c, struct fw_cdev_get_cycle_timer)
 408
 409/* available since kernel version 2.6.30 */
 410#define FW_CDEV_IOC_ALLOCATE_ISO_RESOURCE       _IOWR('#', 0x0d, struct fw_cdev_allocate_iso_resource)
 411#define FW_CDEV_IOC_DEALLOCATE_ISO_RESOURCE      _IOW('#', 0x0e, struct fw_cdev_deallocate)
 412#define FW_CDEV_IOC_ALLOCATE_ISO_RESOURCE_ONCE   _IOW('#', 0x0f, struct fw_cdev_allocate_iso_resource)
 413#define FW_CDEV_IOC_DEALLOCATE_ISO_RESOURCE_ONCE _IOW('#', 0x10, struct fw_cdev_allocate_iso_resource)
 414#define FW_CDEV_IOC_GET_SPEED                     _IO('#', 0x11) /* returns speed code */
 415#define FW_CDEV_IOC_SEND_BROADCAST_REQUEST       _IOW('#', 0x12, struct fw_cdev_send_request)
 416#define FW_CDEV_IOC_SEND_STREAM_PACKET           _IOW('#', 0x13, struct fw_cdev_send_stream_packet)
 417
 418/* available since kernel version 2.6.34 */
 419#define FW_CDEV_IOC_GET_CYCLE_TIMER2   _IOWR('#', 0x14, struct fw_cdev_get_cycle_timer2)
 420
 421/* available since kernel version 2.6.36 */
 422#define FW_CDEV_IOC_SEND_PHY_PACKET    _IOWR('#', 0x15, struct fw_cdev_send_phy_packet)
 423#define FW_CDEV_IOC_RECEIVE_PHY_PACKETS _IOW('#', 0x16, struct fw_cdev_receive_phy_packets)
 424#define FW_CDEV_IOC_SET_ISO_CHANNELS    _IOW('#', 0x17, struct fw_cdev_set_iso_channels)
 425
 426/* available since kernel version 3.4 */
 427#define FW_CDEV_IOC_FLUSH_ISO           _IOW('#', 0x18, struct fw_cdev_flush_iso)
 428
 429/*
 430 * ABI version history
 431 *  1  (2.6.22)  - initial version
 432 *     (2.6.24)  - added %FW_CDEV_IOC_GET_CYCLE_TIMER
 433 *  2  (2.6.30)  - changed &fw_cdev_event_iso_interrupt.header if
 434 *                 &fw_cdev_create_iso_context.header_size is 8 or more
 435 *               - added %FW_CDEV_IOC_*_ISO_RESOURCE*,
 436 *                 %FW_CDEV_IOC_GET_SPEED, %FW_CDEV_IOC_SEND_BROADCAST_REQUEST,
 437 *                 %FW_CDEV_IOC_SEND_STREAM_PACKET
 438 *     (2.6.32)  - added time stamp to xmit &fw_cdev_event_iso_interrupt
 439 *     (2.6.33)  - IR has always packet-per-buffer semantics now, not one of
 440 *                 dual-buffer or packet-per-buffer depending on hardware
 441 *               - shared use and auto-response for FCP registers
 442 *  3  (2.6.34)  - made &fw_cdev_get_cycle_timer reliable
 443 *               - added %FW_CDEV_IOC_GET_CYCLE_TIMER2
 444 *  4  (2.6.36)  - added %FW_CDEV_EVENT_REQUEST2, %FW_CDEV_EVENT_PHY_PACKET_*,
 445 *                 and &fw_cdev_allocate.region_end
 446 *               - implemented &fw_cdev_event_bus_reset.bm_node_id
 447 *               - added %FW_CDEV_IOC_SEND_PHY_PACKET, _RECEIVE_PHY_PACKETS
 448 *               - added %FW_CDEV_EVENT_ISO_INTERRUPT_MULTICHANNEL,
 449 *                 %FW_CDEV_ISO_CONTEXT_RECEIVE_MULTICHANNEL, and
 450 *                 %FW_CDEV_IOC_SET_ISO_CHANNELS
 451 *  5  (3.4)     - send %FW_CDEV_EVENT_ISO_INTERRUPT events when needed to
 452 *                 avoid dropping data
 453 *               - added %FW_CDEV_IOC_FLUSH_ISO
 454 */
 455
 456/**
 457 * struct fw_cdev_get_info - General purpose information ioctl
 458 * @version:    The version field is just a running serial number.  Both an
 459 *              input parameter (ABI version implemented by the client) and
 460 *              output parameter (ABI version implemented by the kernel).
 461 *              A client shall fill in the ABI @version for which the client
 462 *              was implemented.  This is necessary for forward compatibility.
 463 * @rom_length: If @rom is non-zero, up to @rom_length bytes of Configuration
 464 *              ROM will be copied into that user space address.  In either
 465 *              case, @rom_length is updated with the actual length of the
 466 *              Configuration ROM.
 467 * @rom:        If non-zero, address of a buffer to be filled by a copy of the
 468 *              device's Configuration ROM
 469 * @bus_reset:  If non-zero, address of a buffer to be filled by a
 470 *              &struct fw_cdev_event_bus_reset with the current state
 471 *              of the bus.  This does not cause a bus reset to happen.
 472 * @bus_reset_closure: Value of &closure in this and subsequent bus reset events
 473 * @card:       The index of the card this device belongs to
 474 *
 475 * The %FW_CDEV_IOC_GET_INFO ioctl is usually the very first one which a client
 476 * performs right after it opened a /dev/fw* file.
 477 *
 478 * As a side effect, reception of %FW_CDEV_EVENT_BUS_RESET events to be read(2)
 479 * is started by this ioctl.
 480 */
 481struct fw_cdev_get_info {
 482        __u32 version;
 483        __u32 rom_length;
 484        __u64 rom;
 485        __u64 bus_reset;
 486        __u64 bus_reset_closure;
 487        __u32 card;
 488};
 489
 490/**
 491 * struct fw_cdev_send_request - Send an asynchronous request packet
 492 * @tcode:      Transaction code of the request
 493 * @length:     Length of outgoing payload, in bytes
 494 * @offset:     48-bit offset at destination node
 495 * @closure:    Passed back to userspace in the response event
 496 * @data:       Userspace pointer to payload
 497 * @generation: The bus generation where packet is valid
 498 *
 499 * Send a request to the device.  This ioctl implements all outgoing requests.
 500 * Both quadlet and block request specify the payload as a pointer to the data
 501 * in the @data field.  Once the transaction completes, the kernel writes an
 502 * &fw_cdev_event_response event back.  The @closure field is passed back to
 503 * user space in the response event.
 504 */
 505struct fw_cdev_send_request {
 506        __u32 tcode;
 507        __u32 length;
 508        __u64 offset;
 509        __u64 closure;
 510        __u64 data;
 511        __u32 generation;
 512};
 513
 514/**
 515 * struct fw_cdev_send_response - Send an asynchronous response packet
 516 * @rcode:      Response code as determined by the userspace handler
 517 * @length:     Length of outgoing payload, in bytes
 518 * @data:       Userspace pointer to payload
 519 * @handle:     The handle from the &fw_cdev_event_request
 520 *
 521 * Send a response to an incoming request.  By setting up an address range using
 522 * the %FW_CDEV_IOC_ALLOCATE ioctl, userspace can listen for incoming requests.  An
 523 * incoming request will generate an %FW_CDEV_EVENT_REQUEST, and userspace must
 524 * send a reply using this ioctl.  The event has a handle to the kernel-side
 525 * pending transaction, which should be used with this ioctl.
 526 */
 527struct fw_cdev_send_response {
 528        __u32 rcode;
 529        __u32 length;
 530        __u64 data;
 531        __u32 handle;
 532};
 533
 534/**
 535 * struct fw_cdev_allocate - Allocate a CSR in an address range
 536 * @offset:     Start offset of the address range
 537 * @closure:    To be passed back to userspace in request events
 538 * @length:     Length of the CSR, in bytes
 539 * @handle:     Handle to the allocation, written by the kernel
 540 * @region_end: First address above the address range (added in ABI v4, 2.6.36)
 541 *
 542 * Allocate an address range in the 48-bit address space on the local node
 543 * (the controller).  This allows userspace to listen for requests with an
 544 * offset within that address range.  Every time when the kernel receives a
 545 * request within the range, an &fw_cdev_event_request2 event will be emitted.
 546 * (If the kernel or the client implements ABI version <= 3, an
 547 * &fw_cdev_event_request will be generated instead.)
 548 *
 549 * The @closure field is passed back to userspace in these request events.
 550 * The @handle field is an out parameter, returning a handle to the allocated
 551 * range to be used for later deallocation of the range.
 552 *
 553 * The address range is allocated on all local nodes.  The address allocation
 554 * is exclusive except for the FCP command and response registers.  If an
 555 * exclusive address region is already in use, the ioctl fails with errno set
 556 * to %EBUSY.
 557 *
 558 * If kernel and client implement ABI version >= 4, the kernel looks up a free
 559 * spot of size @length inside [@offset..@region_end) and, if found, writes
 560 * the start address of the new CSR back in @offset.  I.e. @offset is an
 561 * in and out parameter.  If this automatic placement of a CSR in a bigger
 562 * address range is not desired, the client simply needs to set @region_end
 563 * = @offset + @length.
 564 *
 565 * If the kernel or the client implements ABI version <= 3, @region_end is
 566 * ignored and effectively assumed to be @offset + @length.
 567 *
 568 * @region_end is only present in a kernel header >= 2.6.36.  If necessary,
 569 * this can for example be tested by #ifdef FW_CDEV_EVENT_REQUEST2.
 570 */
 571struct fw_cdev_allocate {
 572        __u64 offset;
 573        __u64 closure;
 574        __u32 length;
 575        __u32 handle;
 576        __u64 region_end;       /* available since kernel version 2.6.36 */
 577};
 578
 579/**
 580 * struct fw_cdev_deallocate - Free a CSR address range or isochronous resource
 581 * @handle:     Handle to the address range or iso resource, as returned by the
 582 *              kernel when the range or resource was allocated
 583 */
 584struct fw_cdev_deallocate {
 585        __u32 handle;
 586};
 587
 588#define FW_CDEV_LONG_RESET      0
 589#define FW_CDEV_SHORT_RESET     1
 590
 591/**
 592 * struct fw_cdev_initiate_bus_reset - Initiate a bus reset
 593 * @type:       %FW_CDEV_SHORT_RESET or %FW_CDEV_LONG_RESET
 594 *
 595 * Initiate a bus reset for the bus this device is on.  The bus reset can be
 596 * either the original (long) bus reset or the arbitrated (short) bus reset
 597 * introduced in 1394a-2000.
 598 *
 599 * The ioctl returns immediately.  A subsequent &fw_cdev_event_bus_reset
 600 * indicates when the reset actually happened.  Since ABI v4, this may be
 601 * considerably later than the ioctl because the kernel ensures a grace period
 602 * between subsequent bus resets as per IEEE 1394 bus management specification.
 603 */
 604struct fw_cdev_initiate_bus_reset {
 605        __u32 type;
 606};
 607
 608/**
 609 * struct fw_cdev_add_descriptor - Add contents to the local node's config ROM
 610 * @immediate:  If non-zero, immediate key to insert before pointer
 611 * @key:        Upper 8 bits of root directory pointer
 612 * @data:       Userspace pointer to contents of descriptor block
 613 * @length:     Length of descriptor block data, in quadlets
 614 * @handle:     Handle to the descriptor, written by the kernel
 615 *
 616 * Add a descriptor block and optionally a preceding immediate key to the local
 617 * node's Configuration ROM.
 618 *
 619 * The @key field specifies the upper 8 bits of the descriptor root directory
 620 * pointer and the @data and @length fields specify the contents. The @key
 621 * should be of the form 0xXX000000. The offset part of the root directory entry
 622 * will be filled in by the kernel.
 623 *
 624 * If not 0, the @immediate field specifies an immediate key which will be
 625 * inserted before the root directory pointer.
 626 *
 627 * @immediate, @key, and @data array elements are CPU-endian quadlets.
 628 *
 629 * If successful, the kernel adds the descriptor and writes back a @handle to
 630 * the kernel-side object to be used for later removal of the descriptor block
 631 * and immediate key.  The kernel will also generate a bus reset to signal the
 632 * change of the Configuration ROM to other nodes.
 633 *
 634 * This ioctl affects the Configuration ROMs of all local nodes.
 635 * The ioctl only succeeds on device files which represent a local node.
 636 */
 637struct fw_cdev_add_descriptor {
 638        __u32 immediate;
 639        __u32 key;
 640        __u64 data;
 641        __u32 length;
 642        __u32 handle;
 643};
 644
 645/**
 646 * struct fw_cdev_remove_descriptor - Remove contents from the Configuration ROM
 647 * @handle:     Handle to the descriptor, as returned by the kernel when the
 648 *              descriptor was added
 649 *
 650 * Remove a descriptor block and accompanying immediate key from the local
 651 * nodes' Configuration ROMs.  The kernel will also generate a bus reset to
 652 * signal the change of the Configuration ROM to other nodes.
 653 */
 654struct fw_cdev_remove_descriptor {
 655        __u32 handle;
 656};
 657
 658#define FW_CDEV_ISO_CONTEXT_TRANSMIT                    0
 659#define FW_CDEV_ISO_CONTEXT_RECEIVE                     1
 660#define FW_CDEV_ISO_CONTEXT_RECEIVE_MULTICHANNEL        2 /* added in 2.6.36 */
 661
 662/**
 663 * struct fw_cdev_create_iso_context - Create a context for isochronous I/O
 664 * @type:       %FW_CDEV_ISO_CONTEXT_TRANSMIT or %FW_CDEV_ISO_CONTEXT_RECEIVE or
 665 *              %FW_CDEV_ISO_CONTEXT_RECEIVE_MULTICHANNEL
 666 * @header_size: Header size to strip in single-channel reception
 667 * @channel:    Channel to bind to in single-channel reception or transmission
 668 * @speed:      Transmission speed
 669 * @closure:    To be returned in &fw_cdev_event_iso_interrupt or
 670 *              &fw_cdev_event_iso_interrupt_multichannel
 671 * @handle:     Handle to context, written back by kernel
 672 *
 673 * Prior to sending or receiving isochronous I/O, a context must be created.
 674 * The context records information about the transmit or receive configuration
 675 * and typically maps to an underlying hardware resource.  A context is set up
 676 * for either sending or receiving.  It is bound to a specific isochronous
 677 * @channel.
 678 *
 679 * In case of multichannel reception, @header_size and @channel are ignored
 680 * and the channels are selected by %FW_CDEV_IOC_SET_ISO_CHANNELS.
 681 *
 682 * For %FW_CDEV_ISO_CONTEXT_RECEIVE contexts, @header_size must be at least 4
 683 * and must be a multiple of 4.  It is ignored in other context types.
 684 *
 685 * @speed is ignored in receive context types.
 686 *
 687 * If a context was successfully created, the kernel writes back a handle to the
 688 * context, which must be passed in for subsequent operations on that context.
 689 *
 690 * Limitations:
 691 * No more than one iso context can be created per fd.
 692 * The total number of contexts that all userspace and kernelspace drivers can
 693 * create on a card at a time is a hardware limit, typically 4 or 8 contexts per
 694 * direction, and of them at most one multichannel receive context.
 695 */
 696struct fw_cdev_create_iso_context {
 697        __u32 type;
 698        __u32 header_size;
 699        __u32 channel;
 700        __u32 speed;
 701        __u64 closure;
 702        __u32 handle;
 703};
 704
 705/**
 706 * struct fw_cdev_set_iso_channels - Select channels in multichannel reception
 707 * @channels:   Bitmask of channels to listen to
 708 * @handle:     Handle of the mutichannel receive context
 709 *
 710 * @channels is the bitwise or of 1ULL << n for each channel n to listen to.
 711 *
 712 * The ioctl fails with errno %EBUSY if there is already another receive context
 713 * on a channel in @channels.  In that case, the bitmask of all unoccupied
 714 * channels is returned in @channels.
 715 */
 716struct fw_cdev_set_iso_channels {
 717        __u64 channels;
 718        __u32 handle;
 719};
 720
 721#define FW_CDEV_ISO_PAYLOAD_LENGTH(v)   (v)
 722#define FW_CDEV_ISO_INTERRUPT           (1 << 16)
 723#define FW_CDEV_ISO_SKIP                (1 << 17)
 724#define FW_CDEV_ISO_SYNC                (1 << 17)
 725#define FW_CDEV_ISO_TAG(v)              ((v) << 18)
 726#define FW_CDEV_ISO_SY(v)               ((v) << 20)
 727#define FW_CDEV_ISO_HEADER_LENGTH(v)    ((v) << 24)
 728
 729/**
 730 * struct fw_cdev_iso_packet - Isochronous packet
 731 * @control:    Contains the header length (8 uppermost bits),
 732 *              the sy field (4 bits), the tag field (2 bits), a sync flag
 733 *              or a skip flag (1 bit), an interrupt flag (1 bit), and the
 734 *              payload length (16 lowermost bits)
 735 * @header:     Header and payload in case of a transmit context.
 736 *
 737 * &struct fw_cdev_iso_packet is used to describe isochronous packet queues.
 738 * Use the FW_CDEV_ISO_ macros to fill in @control.
 739 * The @header array is empty in case of receive contexts.
 740 *
 741 * Context type %FW_CDEV_ISO_CONTEXT_TRANSMIT:
 742 *
 743 * @control.HEADER_LENGTH must be a multiple of 4.  It specifies the numbers of
 744 * bytes in @header that will be prepended to the packet's payload.  These bytes
 745 * are copied into the kernel and will not be accessed after the ioctl has
 746 * returned.
 747 *
 748 * The @control.SY and TAG fields are copied to the iso packet header.  These
 749 * fields are specified by IEEE 1394a and IEC 61883-1.
 750 *
 751 * The @control.SKIP flag specifies that no packet is to be sent in a frame.
 752 * When using this, all other fields except @control.INTERRUPT must be zero.
 753 *
 754 * When a packet with the @control.INTERRUPT flag set has been completed, an
 755 * &fw_cdev_event_iso_interrupt event will be sent.
 756 *
 757 * Context type %FW_CDEV_ISO_CONTEXT_RECEIVE:
 758 *
 759 * @control.HEADER_LENGTH must be a multiple of the context's header_size.
 760 * If the HEADER_LENGTH is larger than the context's header_size, multiple
 761 * packets are queued for this entry.
 762 *
 763 * The @control.SY and TAG fields are ignored.
 764 *
 765 * If the @control.SYNC flag is set, the context drops all packets until a
 766 * packet with a sy field is received which matches &fw_cdev_start_iso.sync.
 767 *
 768 * @control.PAYLOAD_LENGTH defines how many payload bytes can be received for
 769 * one packet (in addition to payload quadlets that have been defined as headers
 770 * and are stripped and returned in the &fw_cdev_event_iso_interrupt structure).
 771 * If more bytes are received, the additional bytes are dropped.  If less bytes
 772 * are received, the remaining bytes in this part of the payload buffer will not
 773 * be written to, not even by the next packet.  I.e., packets received in
 774 * consecutive frames will not necessarily be consecutive in memory.  If an
 775 * entry has queued multiple packets, the PAYLOAD_LENGTH is divided equally
 776 * among them.
 777 *
 778 * When a packet with the @control.INTERRUPT flag set has been completed, an
 779 * &fw_cdev_event_iso_interrupt event will be sent.  An entry that has queued
 780 * multiple receive packets is completed when its last packet is completed.
 781 *
 782 * Context type %FW_CDEV_ISO_CONTEXT_RECEIVE_MULTICHANNEL:
 783 *
 784 * Here, &fw_cdev_iso_packet would be more aptly named _iso_buffer_chunk since
 785 * it specifies a chunk of the mmap()'ed buffer, while the number and alignment
 786 * of packets to be placed into the buffer chunk is not known beforehand.
 787 *
 788 * @control.PAYLOAD_LENGTH is the size of the buffer chunk and specifies room
 789 * for header, payload, padding, and trailer bytes of one or more packets.
 790 * It must be a multiple of 4.
 791 *
 792 * @control.HEADER_LENGTH, TAG and SY are ignored.  SYNC is treated as described
 793 * for single-channel reception.
 794 *
 795 * When a buffer chunk with the @control.INTERRUPT flag set has been filled
 796 * entirely, an &fw_cdev_event_iso_interrupt_mc event will be sent.
 797 */
 798struct fw_cdev_iso_packet {
 799        __u32 control;
 800        __u32 header[0];
 801};
 802
 803/**
 804 * struct fw_cdev_queue_iso - Queue isochronous packets for I/O
 805 * @packets:    Userspace pointer to an array of &fw_cdev_iso_packet
 806 * @data:       Pointer into mmap()'ed payload buffer
 807 * @size:       Size of the @packets array, in bytes
 808 * @handle:     Isochronous context handle
 809 *
 810 * Queue a number of isochronous packets for reception or transmission.
 811 * This ioctl takes a pointer to an array of &fw_cdev_iso_packet structs,
 812 * which describe how to transmit from or receive into a contiguous region
 813 * of a mmap()'ed payload buffer.  As part of transmit packet descriptors,
 814 * a series of headers can be supplied, which will be prepended to the
 815 * payload during DMA.
 816 *
 817 * The kernel may or may not queue all packets, but will write back updated
 818 * values of the @packets, @data and @size fields, so the ioctl can be
 819 * resubmitted easily.
 820 *
 821 * In case of a multichannel receive context, @data must be quadlet-aligned
 822 * relative to the buffer start.
 823 */
 824struct fw_cdev_queue_iso {
 825        __u64 packets;
 826        __u64 data;
 827        __u32 size;
 828        __u32 handle;
 829};
 830
 831#define FW_CDEV_ISO_CONTEXT_MATCH_TAG0           1
 832#define FW_CDEV_ISO_CONTEXT_MATCH_TAG1           2
 833#define FW_CDEV_ISO_CONTEXT_MATCH_TAG2           4
 834#define FW_CDEV_ISO_CONTEXT_MATCH_TAG3           8
 835#define FW_CDEV_ISO_CONTEXT_MATCH_ALL_TAGS      15
 836
 837/**
 838 * struct fw_cdev_start_iso - Start an isochronous transmission or reception
 839 * @cycle:      Cycle in which to start I/O.  If @cycle is greater than or
 840 *              equal to 0, the I/O will start on that cycle.
 841 * @sync:       Determines the value to wait for for receive packets that have
 842 *              the %FW_CDEV_ISO_SYNC bit set
 843 * @tags:       Tag filter bit mask.  Only valid for isochronous reception.
 844 *              Determines the tag values for which packets will be accepted.
 845 *              Use FW_CDEV_ISO_CONTEXT_MATCH_ macros to set @tags.
 846 * @handle:     Isochronous context handle within which to transmit or receive
 847 */
 848struct fw_cdev_start_iso {
 849        __s32 cycle;
 850        __u32 sync;
 851        __u32 tags;
 852        __u32 handle;
 853};
 854
 855/**
 856 * struct fw_cdev_stop_iso - Stop an isochronous transmission or reception
 857 * @handle:     Handle of isochronous context to stop
 858 */
 859struct fw_cdev_stop_iso {
 860        __u32 handle;
 861};
 862
 863/**
 864 * struct fw_cdev_flush_iso - flush completed iso packets
 865 * @handle:     handle of isochronous context to flush
 866 *
 867 * For %FW_CDEV_ISO_CONTEXT_TRANSMIT or %FW_CDEV_ISO_CONTEXT_RECEIVE contexts,
 868 * report any completed packets.
 869 *
 870 * For %FW_CDEV_ISO_CONTEXT_RECEIVE_MULTICHANNEL contexts, report the current
 871 * offset in the receive buffer, if it has changed; this is typically in the
 872 * middle of some buffer chunk.
 873 *
 874 * Any %FW_CDEV_EVENT_ISO_INTERRUPT or %FW_CDEV_EVENT_ISO_INTERRUPT_MULTICHANNEL
 875 * events generated by this ioctl are sent synchronously, i.e., are available
 876 * for reading from the file descriptor when this ioctl returns.
 877 */
 878struct fw_cdev_flush_iso {
 879        __u32 handle;
 880};
 881
 882/**
 883 * struct fw_cdev_get_cycle_timer - read cycle timer register
 884 * @local_time:   system time, in microseconds since the Epoch
 885 * @cycle_timer:  Cycle Time register contents
 886 *
 887 * Same as %FW_CDEV_IOC_GET_CYCLE_TIMER2, but fixed to use %CLOCK_REALTIME
 888 * and only with microseconds resolution.
 889 *
 890 * In version 1 and 2 of the ABI, this ioctl returned unreliable (non-
 891 * monotonic) @cycle_timer values on certain controllers.
 892 */
 893struct fw_cdev_get_cycle_timer {
 894        __u64 local_time;
 895        __u32 cycle_timer;
 896};
 897
 898/**
 899 * struct fw_cdev_get_cycle_timer2 - read cycle timer register
 900 * @tv_sec:       system time, seconds
 901 * @tv_nsec:      system time, sub-seconds part in nanoseconds
 902 * @clk_id:       input parameter, clock from which to get the system time
 903 * @cycle_timer:  Cycle Time register contents
 904 *
 905 * The %FW_CDEV_IOC_GET_CYCLE_TIMER2 ioctl reads the isochronous cycle timer
 906 * and also the system clock.  This allows to correlate reception time of
 907 * isochronous packets with system time.
 908 *
 909 * @clk_id lets you choose a clock like with POSIX' clock_gettime function.
 910 * Supported @clk_id values are POSIX' %CLOCK_REALTIME and %CLOCK_MONOTONIC
 911 * and Linux' %CLOCK_MONOTONIC_RAW.
 912 *
 913 * @cycle_timer consists of 7 bits cycleSeconds, 13 bits cycleCount, and
 914 * 12 bits cycleOffset, in host byte order.  Cf. the Cycle Time register
 915 * per IEEE 1394 or Isochronous Cycle Timer register per OHCI-1394.
 916 */
 917struct fw_cdev_get_cycle_timer2 {
 918        __s64 tv_sec;
 919        __s32 tv_nsec;
 920        __s32 clk_id;
 921        __u32 cycle_timer;
 922};
 923
 924/**
 925 * struct fw_cdev_allocate_iso_resource - (De)allocate a channel or bandwidth
 926 * @closure:    Passed back to userspace in corresponding iso resource events
 927 * @channels:   Isochronous channels of which one is to be (de)allocated
 928 * @bandwidth:  Isochronous bandwidth units to be (de)allocated
 929 * @handle:     Handle to the allocation, written by the kernel (only valid in
 930 *              case of %FW_CDEV_IOC_ALLOCATE_ISO_RESOURCE ioctls)
 931 *
 932 * The %FW_CDEV_IOC_ALLOCATE_ISO_RESOURCE ioctl initiates allocation of an
 933 * isochronous channel and/or of isochronous bandwidth at the isochronous
 934 * resource manager (IRM).  Only one of the channels specified in @channels is
 935 * allocated.  An %FW_CDEV_EVENT_ISO_RESOURCE_ALLOCATED is sent after
 936 * communication with the IRM, indicating success or failure in the event data.
 937 * The kernel will automatically reallocate the resources after bus resets.
 938 * Should a reallocation fail, an %FW_CDEV_EVENT_ISO_RESOURCE_DEALLOCATED event
 939 * will be sent.  The kernel will also automatically deallocate the resources
 940 * when the file descriptor is closed.
 941 *
 942 * The %FW_CDEV_IOC_DEALLOCATE_ISO_RESOURCE ioctl can be used to initiate
 943 * deallocation of resources which were allocated as described above.
 944 * An %FW_CDEV_EVENT_ISO_RESOURCE_DEALLOCATED event concludes this operation.
 945 *
 946 * The %FW_CDEV_IOC_ALLOCATE_ISO_RESOURCE_ONCE ioctl is a variant of allocation
 947 * without automatic re- or deallocation.
 948 * An %FW_CDEV_EVENT_ISO_RESOURCE_ALLOCATED event concludes this operation,
 949 * indicating success or failure in its data.
 950 *
 951 * The %FW_CDEV_IOC_DEALLOCATE_ISO_RESOURCE_ONCE ioctl works like
 952 * %FW_CDEV_IOC_ALLOCATE_ISO_RESOURCE_ONCE except that resources are freed
 953 * instead of allocated.
 954 * An %FW_CDEV_EVENT_ISO_RESOURCE_DEALLOCATED event concludes this operation.
 955 *
 956 * To summarize, %FW_CDEV_IOC_ALLOCATE_ISO_RESOURCE allocates iso resources
 957 * for the lifetime of the fd or @handle.
 958 * In contrast, %FW_CDEV_IOC_ALLOCATE_ISO_RESOURCE_ONCE allocates iso resources
 959 * for the duration of a bus generation.
 960 *
 961 * @channels is a host-endian bitfield with the least significant bit
 962 * representing channel 0 and the most significant bit representing channel 63:
 963 * 1ULL << c for each channel c that is a candidate for (de)allocation.
 964 *
 965 * @bandwidth is expressed in bandwidth allocation units, i.e. the time to send
 966 * one quadlet of data (payload or header data) at speed S1600.
 967 */
 968struct fw_cdev_allocate_iso_resource {
 969        __u64 closure;
 970        __u64 channels;
 971        __u32 bandwidth;
 972        __u32 handle;
 973};
 974
 975/**
 976 * struct fw_cdev_send_stream_packet - send an asynchronous stream packet
 977 * @length:     Length of outgoing payload, in bytes
 978 * @tag:        Data format tag
 979 * @channel:    Isochronous channel to transmit to
 980 * @sy:         Synchronization code
 981 * @closure:    Passed back to userspace in the response event
 982 * @data:       Userspace pointer to payload
 983 * @generation: The bus generation where packet is valid
 984 * @speed:      Speed to transmit at
 985 *
 986 * The %FW_CDEV_IOC_SEND_STREAM_PACKET ioctl sends an asynchronous stream packet
 987 * to every device which is listening to the specified channel.  The kernel
 988 * writes an &fw_cdev_event_response event which indicates success or failure of
 989 * the transmission.
 990 */
 991struct fw_cdev_send_stream_packet {
 992        __u32 length;
 993        __u32 tag;
 994        __u32 channel;
 995        __u32 sy;
 996        __u64 closure;
 997        __u64 data;
 998        __u32 generation;
 999        __u32 speed;
1000};
1001
1002/**
1003 * struct fw_cdev_send_phy_packet - send a PHY packet
1004 * @closure:    Passed back to userspace in the PHY-packet-sent event
1005 * @data:       First and second quadlet of the PHY packet
1006 * @generation: The bus generation where packet is valid
1007 *
1008 * The %FW_CDEV_IOC_SEND_PHY_PACKET ioctl sends a PHY packet to all nodes
1009 * on the same card as this device.  After transmission, an
1010 * %FW_CDEV_EVENT_PHY_PACKET_SENT event is generated.
1011 *
1012 * The payload @data[] shall be specified in host byte order.  Usually,
1013 * @data[1] needs to be the bitwise inverse of @data[0].  VersaPHY packets
1014 * are an exception to this rule.
1015 *
1016 * The ioctl is only permitted on device files which represent a local node.
1017 */
1018struct fw_cdev_send_phy_packet {
1019        __u64 closure;
1020        __u32 data[2];
1021        __u32 generation;
1022};
1023
1024/**
1025 * struct fw_cdev_receive_phy_packets - start reception of PHY packets
1026 * @closure: Passed back to userspace in phy packet events
1027 *
1028 * This ioctl activates issuing of %FW_CDEV_EVENT_PHY_PACKET_RECEIVED due to
1029 * incoming PHY packets from any node on the same bus as the device.
1030 *
1031 * The ioctl is only permitted on device files which represent a local node.
1032 */
1033struct fw_cdev_receive_phy_packets {
1034        __u64 closure;
1035};
1036
1037#define FW_CDEV_VERSION 3 /* Meaningless legacy macro; don't use it. */
1038
1039#endif /* _LINUX_FIREWIRE_CDEV_H */
1040