linux/drivers/misc/lis3lv02d/lis3lv02d.c
<<
>>
Prefs
   1/*
   2 *  lis3lv02d.c - ST LIS3LV02DL accelerometer driver
   3 *
   4 *  Copyright (C) 2007-2008 Yan Burman
   5 *  Copyright (C) 2008 Eric Piel
   6 *  Copyright (C) 2008-2009 Pavel Machek
   7 *
   8 *  This program is free software; you can redistribute it and/or modify
   9 *  it under the terms of the GNU General Public License as published by
  10 *  the Free Software Foundation; either version 2 of the License, or
  11 *  (at your option) any later version.
  12 *
  13 *  This program is distributed in the hope that it will be useful,
  14 *  but WITHOUT ANY WARRANTY; without even the implied warranty of
  15 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16 *  GNU General Public License for more details.
  17 *
  18 *  You should have received a copy of the GNU General Public License
  19 *  along with this program; if not, write to the Free Software
  20 *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  21 */
  22
  23#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
  24
  25#include <linux/kernel.h>
  26#include <linux/init.h>
  27#include <linux/dmi.h>
  28#include <linux/module.h>
  29#include <linux/types.h>
  30#include <linux/platform_device.h>
  31#include <linux/interrupt.h>
  32#include <linux/input-polldev.h>
  33#include <linux/delay.h>
  34#include <linux/wait.h>
  35#include <linux/poll.h>
  36#include <linux/slab.h>
  37#include <linux/freezer.h>
  38#include <linux/uaccess.h>
  39#include <linux/miscdevice.h>
  40#include <linux/pm_runtime.h>
  41#include <linux/atomic.h>
  42#include <linux/of_device.h>
  43#include "lis3lv02d.h"
  44
  45#define DRIVER_NAME     "lis3lv02d"
  46
  47/* joystick device poll interval in milliseconds */
  48#define MDPS_POLL_INTERVAL 50
  49#define MDPS_POLL_MIN      0
  50#define MDPS_POLL_MAX      2000
  51
  52#define LIS3_SYSFS_POWERDOWN_DELAY 5000 /* In milliseconds */
  53
  54#define SELFTEST_OK            0
  55#define SELFTEST_FAIL          -1
  56#define SELFTEST_IRQ           -2
  57
  58#define IRQ_LINE0              0
  59#define IRQ_LINE1              1
  60
  61/*
  62 * The sensor can also generate interrupts (DRDY) but it's pretty pointless
  63 * because they are generated even if the data do not change. So it's better
  64 * to keep the interrupt for the free-fall event. The values are updated at
  65 * 40Hz (at the lowest frequency), but as it can be pretty time consuming on
  66 * some low processor, we poll the sensor only at 20Hz... enough for the
  67 * joystick.
  68 */
  69
  70#define LIS3_PWRON_DELAY_WAI_12B        (5000)
  71#define LIS3_PWRON_DELAY_WAI_8B         (3000)
  72
  73/*
  74 * LIS3LV02D spec says 1024 LSBs corresponds 1 G -> 1LSB is 1000/1024 mG
  75 * LIS302D spec says: 18 mG / digit
  76 * LIS3_ACCURACY is used to increase accuracy of the intermediate
  77 * calculation results.
  78 */
  79#define LIS3_ACCURACY                   1024
  80/* Sensitivity values for -2G +2G scale */
  81#define LIS3_SENSITIVITY_12B            ((LIS3_ACCURACY * 1000) / 1024)
  82#define LIS3_SENSITIVITY_8B             (18 * LIS3_ACCURACY)
  83
  84/*
  85 * LIS331DLH spec says 1LSBs corresponds 4G/4096 -> 1LSB is 1000/1024 mG.
  86 * Below macros defines sensitivity values for +/-2G. Dataout bits for
  87 * +/-2G range is 12 bits so 4 bits adjustment must be done to get 12bit
  88 * data from 16bit value. Currently this driver supports only 2G range.
  89 */
  90#define LIS3DLH_SENSITIVITY_2G          ((LIS3_ACCURACY * 1000) / 1024)
  91#define SHIFT_ADJ_2G                    4
  92
  93#define LIS3_DEFAULT_FUZZ_12B           3
  94#define LIS3_DEFAULT_FLAT_12B           3
  95#define LIS3_DEFAULT_FUZZ_8B            1
  96#define LIS3_DEFAULT_FLAT_8B            1
  97
  98struct lis3lv02d lis3_dev = {
  99        .misc_wait   = __WAIT_QUEUE_HEAD_INITIALIZER(lis3_dev.misc_wait),
 100};
 101EXPORT_SYMBOL_GPL(lis3_dev);
 102
 103/* just like param_set_int() but does sanity-check so that it won't point
 104 * over the axis array size
 105 */
 106static int param_set_axis(const char *val, const struct kernel_param *kp)
 107{
 108        int ret = param_set_int(val, kp);
 109        if (!ret) {
 110                int val = *(int *)kp->arg;
 111                if (val < 0)
 112                        val = -val;
 113                if (!val || val > 3)
 114                        return -EINVAL;
 115        }
 116        return ret;
 117}
 118
 119static struct kernel_param_ops param_ops_axis = {
 120        .set = param_set_axis,
 121        .get = param_get_int,
 122};
 123
 124#define param_check_axis(name, p) param_check_int(name, p)
 125
 126module_param_array_named(axes, lis3_dev.ac.as_array, axis, NULL, 0644);
 127MODULE_PARM_DESC(axes, "Axis-mapping for x,y,z directions");
 128
 129static s16 lis3lv02d_read_8(struct lis3lv02d *lis3, int reg)
 130{
 131        s8 lo;
 132        if (lis3->read(lis3, reg, &lo) < 0)
 133                return 0;
 134
 135        return lo;
 136}
 137
 138static s16 lis3lv02d_read_12(struct lis3lv02d *lis3, int reg)
 139{
 140        u8 lo, hi;
 141
 142        lis3->read(lis3, reg - 1, &lo);
 143        lis3->read(lis3, reg, &hi);
 144        /* In "12 bit right justified" mode, bit 6, bit 7, bit 8 = bit 5 */
 145        return (s16)((hi << 8) | lo);
 146}
 147
 148/* 12bits for 2G range, 13 bits for 4G range and 14 bits for 8G range */
 149static s16 lis331dlh_read_data(struct lis3lv02d *lis3, int reg)
 150{
 151        u8 lo, hi;
 152        int v;
 153
 154        lis3->read(lis3, reg - 1, &lo);
 155        lis3->read(lis3, reg, &hi);
 156        v = (int) ((hi << 8) | lo);
 157
 158        return (s16) v >> lis3->shift_adj;
 159}
 160
 161/**
 162 * lis3lv02d_get_axis - For the given axis, give the value converted
 163 * @axis:      1,2,3 - can also be negative
 164 * @hw_values: raw values returned by the hardware
 165 *
 166 * Returns the converted value.
 167 */
 168static inline int lis3lv02d_get_axis(s8 axis, int hw_values[3])
 169{
 170        if (axis > 0)
 171                return hw_values[axis - 1];
 172        else
 173                return -hw_values[-axis - 1];
 174}
 175
 176/**
 177 * lis3lv02d_get_xyz - Get X, Y and Z axis values from the accelerometer
 178 * @lis3: pointer to the device struct
 179 * @x:    where to store the X axis value
 180 * @y:    where to store the Y axis value
 181 * @z:    where to store the Z axis value
 182 *
 183 * Note that 40Hz input device can eat up about 10% CPU at 800MHZ
 184 */
 185static void lis3lv02d_get_xyz(struct lis3lv02d *lis3, int *x, int *y, int *z)
 186{
 187        int position[3];
 188        int i;
 189
 190        if (lis3->blkread) {
 191                if (lis3->whoami == WAI_12B) {
 192                        u16 data[3];
 193                        lis3->blkread(lis3, OUTX_L, 6, (u8 *)data);
 194                        for (i = 0; i < 3; i++)
 195                                position[i] = (s16)le16_to_cpu(data[i]);
 196                } else {
 197                        u8 data[5];
 198                        /* Data: x, dummy, y, dummy, z */
 199                        lis3->blkread(lis3, OUTX, 5, data);
 200                        for (i = 0; i < 3; i++)
 201                                position[i] = (s8)data[i * 2];
 202                }
 203        } else {
 204                position[0] = lis3->read_data(lis3, OUTX);
 205                position[1] = lis3->read_data(lis3, OUTY);
 206                position[2] = lis3->read_data(lis3, OUTZ);
 207        }
 208
 209        for (i = 0; i < 3; i++)
 210                position[i] = (position[i] * lis3->scale) / LIS3_ACCURACY;
 211
 212        *x = lis3lv02d_get_axis(lis3->ac.x, position);
 213        *y = lis3lv02d_get_axis(lis3->ac.y, position);
 214        *z = lis3lv02d_get_axis(lis3->ac.z, position);
 215}
 216
 217/* conversion btw sampling rate and the register values */
 218static int lis3_12_rates[4] = {40, 160, 640, 2560};
 219static int lis3_8_rates[2] = {100, 400};
 220static int lis3_3dc_rates[16] = {0, 1, 10, 25, 50, 100, 200, 400, 1600, 5000};
 221static int lis3_3dlh_rates[4] = {50, 100, 400, 1000};
 222
 223/* ODR is Output Data Rate */
 224static int lis3lv02d_get_odr(struct lis3lv02d *lis3)
 225{
 226        u8 ctrl;
 227        int shift;
 228
 229        lis3->read(lis3, CTRL_REG1, &ctrl);
 230        ctrl &= lis3->odr_mask;
 231        shift = ffs(lis3->odr_mask) - 1;
 232        return lis3->odrs[(ctrl >> shift)];
 233}
 234
 235static int lis3lv02d_get_pwron_wait(struct lis3lv02d *lis3)
 236{
 237        int div = lis3lv02d_get_odr(lis3);
 238
 239        if (WARN_ONCE(div == 0, "device returned spurious data"))
 240                return -ENXIO;
 241
 242        /* LIS3 power on delay is quite long */
 243        msleep(lis3->pwron_delay / div);
 244        return 0;
 245}
 246
 247static int lis3lv02d_set_odr(struct lis3lv02d *lis3, int rate)
 248{
 249        u8 ctrl;
 250        int i, len, shift;
 251
 252        if (!rate)
 253                return -EINVAL;
 254
 255        lis3->read(lis3, CTRL_REG1, &ctrl);
 256        ctrl &= ~lis3->odr_mask;
 257        len = 1 << hweight_long(lis3->odr_mask); /* # of possible values */
 258        shift = ffs(lis3->odr_mask) - 1;
 259
 260        for (i = 0; i < len; i++)
 261                if (lis3->odrs[i] == rate) {
 262                        lis3->write(lis3, CTRL_REG1,
 263                                        ctrl | (i << shift));
 264                        return 0;
 265                }
 266        return -EINVAL;
 267}
 268
 269static int lis3lv02d_selftest(struct lis3lv02d *lis3, s16 results[3])
 270{
 271        u8 ctlreg, reg;
 272        s16 x, y, z;
 273        u8 selftest;
 274        int ret;
 275        u8 ctrl_reg_data;
 276        unsigned char irq_cfg;
 277
 278        mutex_lock(&lis3->mutex);
 279
 280        irq_cfg = lis3->irq_cfg;
 281        if (lis3->whoami == WAI_8B) {
 282                lis3->data_ready_count[IRQ_LINE0] = 0;
 283                lis3->data_ready_count[IRQ_LINE1] = 0;
 284
 285                /* Change interrupt cfg to data ready for selftest */
 286                atomic_inc(&lis3->wake_thread);
 287                lis3->irq_cfg = LIS3_IRQ1_DATA_READY | LIS3_IRQ2_DATA_READY;
 288                lis3->read(lis3, CTRL_REG3, &ctrl_reg_data);
 289                lis3->write(lis3, CTRL_REG3, (ctrl_reg_data &
 290                                ~(LIS3_IRQ1_MASK | LIS3_IRQ2_MASK)) |
 291                                (LIS3_IRQ1_DATA_READY | LIS3_IRQ2_DATA_READY));
 292        }
 293
 294        if ((lis3->whoami == WAI_3DC) || (lis3->whoami == WAI_3DLH)) {
 295                ctlreg = CTRL_REG4;
 296                selftest = CTRL4_ST0;
 297        } else {
 298                ctlreg = CTRL_REG1;
 299                if (lis3->whoami == WAI_12B)
 300                        selftest = CTRL1_ST;
 301                else
 302                        selftest = CTRL1_STP;
 303        }
 304
 305        lis3->read(lis3, ctlreg, &reg);
 306        lis3->write(lis3, ctlreg, (reg | selftest));
 307        ret = lis3lv02d_get_pwron_wait(lis3);
 308        if (ret)
 309                goto fail;
 310
 311        /* Read directly to avoid axis remap */
 312        x = lis3->read_data(lis3, OUTX);
 313        y = lis3->read_data(lis3, OUTY);
 314        z = lis3->read_data(lis3, OUTZ);
 315
 316        /* back to normal settings */
 317        lis3->write(lis3, ctlreg, reg);
 318        ret = lis3lv02d_get_pwron_wait(lis3);
 319        if (ret)
 320                goto fail;
 321
 322        results[0] = x - lis3->read_data(lis3, OUTX);
 323        results[1] = y - lis3->read_data(lis3, OUTY);
 324        results[2] = z - lis3->read_data(lis3, OUTZ);
 325
 326        ret = 0;
 327
 328        if (lis3->whoami == WAI_8B) {
 329                /* Restore original interrupt configuration */
 330                atomic_dec(&lis3->wake_thread);
 331                lis3->write(lis3, CTRL_REG3, ctrl_reg_data);
 332                lis3->irq_cfg = irq_cfg;
 333
 334                if ((irq_cfg & LIS3_IRQ1_MASK) &&
 335                        lis3->data_ready_count[IRQ_LINE0] < 2) {
 336                        ret = SELFTEST_IRQ;
 337                        goto fail;
 338                }
 339
 340                if ((irq_cfg & LIS3_IRQ2_MASK) &&
 341                        lis3->data_ready_count[IRQ_LINE1] < 2) {
 342                        ret = SELFTEST_IRQ;
 343                        goto fail;
 344                }
 345        }
 346
 347        if (lis3->pdata) {
 348                int i;
 349                for (i = 0; i < 3; i++) {
 350                        /* Check against selftest acceptance limits */
 351                        if ((results[i] < lis3->pdata->st_min_limits[i]) ||
 352                            (results[i] > lis3->pdata->st_max_limits[i])) {
 353                                ret = SELFTEST_FAIL;
 354                                goto fail;
 355                        }
 356                }
 357        }
 358
 359        /* test passed */
 360fail:
 361        mutex_unlock(&lis3->mutex);
 362        return ret;
 363}
 364
 365/*
 366 * Order of registers in the list affects to order of the restore process.
 367 * Perhaps it is a good idea to set interrupt enable register as a last one
 368 * after all other configurations
 369 */
 370static u8 lis3_wai8_regs[] = { FF_WU_CFG_1, FF_WU_THS_1, FF_WU_DURATION_1,
 371                               FF_WU_CFG_2, FF_WU_THS_2, FF_WU_DURATION_2,
 372                               CLICK_CFG, CLICK_SRC, CLICK_THSY_X, CLICK_THSZ,
 373                               CLICK_TIMELIMIT, CLICK_LATENCY, CLICK_WINDOW,
 374                               CTRL_REG1, CTRL_REG2, CTRL_REG3};
 375
 376static u8 lis3_wai12_regs[] = {FF_WU_CFG, FF_WU_THS_L, FF_WU_THS_H,
 377                               FF_WU_DURATION, DD_CFG, DD_THSI_L, DD_THSI_H,
 378                               DD_THSE_L, DD_THSE_H,
 379                               CTRL_REG1, CTRL_REG3, CTRL_REG2};
 380
 381static inline void lis3_context_save(struct lis3lv02d *lis3)
 382{
 383        int i;
 384        for (i = 0; i < lis3->regs_size; i++)
 385                lis3->read(lis3, lis3->regs[i], &lis3->reg_cache[i]);
 386        lis3->regs_stored = true;
 387}
 388
 389static inline void lis3_context_restore(struct lis3lv02d *lis3)
 390{
 391        int i;
 392        if (lis3->regs_stored)
 393                for (i = 0; i < lis3->regs_size; i++)
 394                        lis3->write(lis3, lis3->regs[i], lis3->reg_cache[i]);
 395}
 396
 397void lis3lv02d_poweroff(struct lis3lv02d *lis3)
 398{
 399        if (lis3->reg_ctrl)
 400                lis3_context_save(lis3);
 401        /* disable X,Y,Z axis and power down */
 402        lis3->write(lis3, CTRL_REG1, 0x00);
 403        if (lis3->reg_ctrl)
 404                lis3->reg_ctrl(lis3, LIS3_REG_OFF);
 405}
 406EXPORT_SYMBOL_GPL(lis3lv02d_poweroff);
 407
 408int lis3lv02d_poweron(struct lis3lv02d *lis3)
 409{
 410        int err;
 411        u8 reg;
 412
 413        lis3->init(lis3);
 414
 415        /*
 416         * Common configuration
 417         * BDU: (12 bits sensors only) LSB and MSB values are not updated until
 418         *      both have been read. So the value read will always be correct.
 419         * Set BOOT bit to refresh factory tuning values.
 420         */
 421        if (lis3->pdata) {
 422                lis3->read(lis3, CTRL_REG2, &reg);
 423                if (lis3->whoami ==  WAI_12B)
 424                        reg |= CTRL2_BDU | CTRL2_BOOT;
 425                else if (lis3->whoami ==  WAI_3DLH)
 426                        reg |= CTRL2_BOOT_3DLH;
 427                else
 428                        reg |= CTRL2_BOOT_8B;
 429                lis3->write(lis3, CTRL_REG2, reg);
 430
 431                if (lis3->whoami ==  WAI_3DLH) {
 432                        lis3->read(lis3, CTRL_REG4, &reg);
 433                        reg |= CTRL4_BDU;
 434                        lis3->write(lis3, CTRL_REG4, reg);
 435                }
 436        }
 437
 438        err = lis3lv02d_get_pwron_wait(lis3);
 439        if (err)
 440                return err;
 441
 442        if (lis3->reg_ctrl)
 443                lis3_context_restore(lis3);
 444
 445        return 0;
 446}
 447EXPORT_SYMBOL_GPL(lis3lv02d_poweron);
 448
 449
 450static void lis3lv02d_joystick_poll(struct input_polled_dev *pidev)
 451{
 452        struct lis3lv02d *lis3 = pidev->private;
 453        int x, y, z;
 454
 455        mutex_lock(&lis3->mutex);
 456        lis3lv02d_get_xyz(lis3, &x, &y, &z);
 457        input_report_abs(pidev->input, ABS_X, x);
 458        input_report_abs(pidev->input, ABS_Y, y);
 459        input_report_abs(pidev->input, ABS_Z, z);
 460        input_sync(pidev->input);
 461        mutex_unlock(&lis3->mutex);
 462}
 463
 464static void lis3lv02d_joystick_open(struct input_polled_dev *pidev)
 465{
 466        struct lis3lv02d *lis3 = pidev->private;
 467
 468        if (lis3->pm_dev)
 469                pm_runtime_get_sync(lis3->pm_dev);
 470
 471        if (lis3->pdata && lis3->whoami == WAI_8B && lis3->idev)
 472                atomic_set(&lis3->wake_thread, 1);
 473        /*
 474         * Update coordinates for the case where poll interval is 0 and
 475         * the chip in running purely under interrupt control
 476         */
 477        lis3lv02d_joystick_poll(pidev);
 478}
 479
 480static void lis3lv02d_joystick_close(struct input_polled_dev *pidev)
 481{
 482        struct lis3lv02d *lis3 = pidev->private;
 483
 484        atomic_set(&lis3->wake_thread, 0);
 485        if (lis3->pm_dev)
 486                pm_runtime_put(lis3->pm_dev);
 487}
 488
 489static irqreturn_t lis302dl_interrupt(int irq, void *data)
 490{
 491        struct lis3lv02d *lis3 = data;
 492
 493        if (!test_bit(0, &lis3->misc_opened))
 494                goto out;
 495
 496        /*
 497         * Be careful: on some HP laptops the bios force DD when on battery and
 498         * the lid is closed. This leads to interrupts as soon as a little move
 499         * is done.
 500         */
 501        atomic_inc(&lis3->count);
 502
 503        wake_up_interruptible(&lis3->misc_wait);
 504        kill_fasync(&lis3->async_queue, SIGIO, POLL_IN);
 505out:
 506        if (atomic_read(&lis3->wake_thread))
 507                return IRQ_WAKE_THREAD;
 508        return IRQ_HANDLED;
 509}
 510
 511static void lis302dl_interrupt_handle_click(struct lis3lv02d *lis3)
 512{
 513        struct input_dev *dev = lis3->idev->input;
 514        u8 click_src;
 515
 516        mutex_lock(&lis3->mutex);
 517        lis3->read(lis3, CLICK_SRC, &click_src);
 518
 519        if (click_src & CLICK_SINGLE_X) {
 520                input_report_key(dev, lis3->mapped_btns[0], 1);
 521                input_report_key(dev, lis3->mapped_btns[0], 0);
 522        }
 523
 524        if (click_src & CLICK_SINGLE_Y) {
 525                input_report_key(dev, lis3->mapped_btns[1], 1);
 526                input_report_key(dev, lis3->mapped_btns[1], 0);
 527        }
 528
 529        if (click_src & CLICK_SINGLE_Z) {
 530                input_report_key(dev, lis3->mapped_btns[2], 1);
 531                input_report_key(dev, lis3->mapped_btns[2], 0);
 532        }
 533        input_sync(dev);
 534        mutex_unlock(&lis3->mutex);
 535}
 536
 537static inline void lis302dl_data_ready(struct lis3lv02d *lis3, int index)
 538{
 539        int dummy;
 540
 541        /* Dummy read to ack interrupt */
 542        lis3lv02d_get_xyz(lis3, &dummy, &dummy, &dummy);
 543        lis3->data_ready_count[index]++;
 544}
 545
 546static irqreturn_t lis302dl_interrupt_thread1_8b(int irq, void *data)
 547{
 548        struct lis3lv02d *lis3 = data;
 549        u8 irq_cfg = lis3->irq_cfg & LIS3_IRQ1_MASK;
 550
 551        if (irq_cfg == LIS3_IRQ1_CLICK)
 552                lis302dl_interrupt_handle_click(lis3);
 553        else if (unlikely(irq_cfg == LIS3_IRQ1_DATA_READY))
 554                lis302dl_data_ready(lis3, IRQ_LINE0);
 555        else
 556                lis3lv02d_joystick_poll(lis3->idev);
 557
 558        return IRQ_HANDLED;
 559}
 560
 561static irqreturn_t lis302dl_interrupt_thread2_8b(int irq, void *data)
 562{
 563        struct lis3lv02d *lis3 = data;
 564        u8 irq_cfg = lis3->irq_cfg & LIS3_IRQ2_MASK;
 565
 566        if (irq_cfg == LIS3_IRQ2_CLICK)
 567                lis302dl_interrupt_handle_click(lis3);
 568        else if (unlikely(irq_cfg == LIS3_IRQ2_DATA_READY))
 569                lis302dl_data_ready(lis3, IRQ_LINE1);
 570        else
 571                lis3lv02d_joystick_poll(lis3->idev);
 572
 573        return IRQ_HANDLED;
 574}
 575
 576static int lis3lv02d_misc_open(struct inode *inode, struct file *file)
 577{
 578        struct lis3lv02d *lis3 = container_of(file->private_data,
 579                                              struct lis3lv02d, miscdev);
 580
 581        if (test_and_set_bit(0, &lis3->misc_opened))
 582                return -EBUSY; /* already open */
 583
 584        if (lis3->pm_dev)
 585                pm_runtime_get_sync(lis3->pm_dev);
 586
 587        atomic_set(&lis3->count, 0);
 588        return 0;
 589}
 590
 591static int lis3lv02d_misc_release(struct inode *inode, struct file *file)
 592{
 593        struct lis3lv02d *lis3 = container_of(file->private_data,
 594                                              struct lis3lv02d, miscdev);
 595
 596        clear_bit(0, &lis3->misc_opened); /* release the device */
 597        if (lis3->pm_dev)
 598                pm_runtime_put(lis3->pm_dev);
 599        return 0;
 600}
 601
 602static ssize_t lis3lv02d_misc_read(struct file *file, char __user *buf,
 603                                size_t count, loff_t *pos)
 604{
 605        struct lis3lv02d *lis3 = container_of(file->private_data,
 606                                              struct lis3lv02d, miscdev);
 607
 608        DECLARE_WAITQUEUE(wait, current);
 609        u32 data;
 610        unsigned char byte_data;
 611        ssize_t retval = 1;
 612
 613        if (count < 1)
 614                return -EINVAL;
 615
 616        add_wait_queue(&lis3->misc_wait, &wait);
 617        while (true) {
 618                set_current_state(TASK_INTERRUPTIBLE);
 619                data = atomic_xchg(&lis3->count, 0);
 620                if (data)
 621                        break;
 622
 623                if (file->f_flags & O_NONBLOCK) {
 624                        retval = -EAGAIN;
 625                        goto out;
 626                }
 627
 628                if (signal_pending(current)) {
 629                        retval = -ERESTARTSYS;
 630                        goto out;
 631                }
 632
 633                schedule();
 634        }
 635
 636        if (data < 255)
 637                byte_data = data;
 638        else
 639                byte_data = 255;
 640
 641        /* make sure we are not going into copy_to_user() with
 642         * TASK_INTERRUPTIBLE state */
 643        set_current_state(TASK_RUNNING);
 644        if (copy_to_user(buf, &byte_data, sizeof(byte_data)))
 645                retval = -EFAULT;
 646
 647out:
 648        __set_current_state(TASK_RUNNING);
 649        remove_wait_queue(&lis3->misc_wait, &wait);
 650
 651        return retval;
 652}
 653
 654static unsigned int lis3lv02d_misc_poll(struct file *file, poll_table *wait)
 655{
 656        struct lis3lv02d *lis3 = container_of(file->private_data,
 657                                              struct lis3lv02d, miscdev);
 658
 659        poll_wait(file, &lis3->misc_wait, wait);
 660        if (atomic_read(&lis3->count))
 661                return POLLIN | POLLRDNORM;
 662        return 0;
 663}
 664
 665static int lis3lv02d_misc_fasync(int fd, struct file *file, int on)
 666{
 667        struct lis3lv02d *lis3 = container_of(file->private_data,
 668                                              struct lis3lv02d, miscdev);
 669
 670        return fasync_helper(fd, file, on, &lis3->async_queue);
 671}
 672
 673static const struct file_operations lis3lv02d_misc_fops = {
 674        .owner   = THIS_MODULE,
 675        .llseek  = no_llseek,
 676        .read    = lis3lv02d_misc_read,
 677        .open    = lis3lv02d_misc_open,
 678        .release = lis3lv02d_misc_release,
 679        .poll    = lis3lv02d_misc_poll,
 680        .fasync  = lis3lv02d_misc_fasync,
 681};
 682
 683int lis3lv02d_joystick_enable(struct lis3lv02d *lis3)
 684{
 685        struct input_dev *input_dev;
 686        int err;
 687        int max_val, fuzz, flat;
 688        int btns[] = {BTN_X, BTN_Y, BTN_Z};
 689
 690        if (lis3->idev)
 691                return -EINVAL;
 692
 693        lis3->idev = input_allocate_polled_device();
 694        if (!lis3->idev)
 695                return -ENOMEM;
 696
 697        lis3->idev->poll = lis3lv02d_joystick_poll;
 698        lis3->idev->open = lis3lv02d_joystick_open;
 699        lis3->idev->close = lis3lv02d_joystick_close;
 700        lis3->idev->poll_interval = MDPS_POLL_INTERVAL;
 701        lis3->idev->poll_interval_min = MDPS_POLL_MIN;
 702        lis3->idev->poll_interval_max = MDPS_POLL_MAX;
 703        lis3->idev->private = lis3;
 704        input_dev = lis3->idev->input;
 705
 706        input_dev->name       = "ST LIS3LV02DL Accelerometer";
 707        input_dev->phys       = DRIVER_NAME "/input0";
 708        input_dev->id.bustype = BUS_HOST;
 709        input_dev->id.vendor  = 0;
 710        input_dev->dev.parent = &lis3->pdev->dev;
 711
 712        set_bit(EV_ABS, input_dev->evbit);
 713        max_val = (lis3->mdps_max_val * lis3->scale) / LIS3_ACCURACY;
 714        if (lis3->whoami == WAI_12B) {
 715                fuzz = LIS3_DEFAULT_FUZZ_12B;
 716                flat = LIS3_DEFAULT_FLAT_12B;
 717        } else {
 718                fuzz = LIS3_DEFAULT_FUZZ_8B;
 719                flat = LIS3_DEFAULT_FLAT_8B;
 720        }
 721        fuzz = (fuzz * lis3->scale) / LIS3_ACCURACY;
 722        flat = (flat * lis3->scale) / LIS3_ACCURACY;
 723
 724        input_set_abs_params(input_dev, ABS_X, -max_val, max_val, fuzz, flat);
 725        input_set_abs_params(input_dev, ABS_Y, -max_val, max_val, fuzz, flat);
 726        input_set_abs_params(input_dev, ABS_Z, -max_val, max_val, fuzz, flat);
 727
 728        lis3->mapped_btns[0] = lis3lv02d_get_axis(abs(lis3->ac.x), btns);
 729        lis3->mapped_btns[1] = lis3lv02d_get_axis(abs(lis3->ac.y), btns);
 730        lis3->mapped_btns[2] = lis3lv02d_get_axis(abs(lis3->ac.z), btns);
 731
 732        err = input_register_polled_device(lis3->idev);
 733        if (err) {
 734                input_free_polled_device(lis3->idev);
 735                lis3->idev = NULL;
 736        }
 737
 738        return err;
 739}
 740EXPORT_SYMBOL_GPL(lis3lv02d_joystick_enable);
 741
 742void lis3lv02d_joystick_disable(struct lis3lv02d *lis3)
 743{
 744        if (lis3->irq)
 745                free_irq(lis3->irq, lis3);
 746        if (lis3->pdata && lis3->pdata->irq2)
 747                free_irq(lis3->pdata->irq2, lis3);
 748
 749        if (!lis3->idev)
 750                return;
 751
 752        if (lis3->irq)
 753                misc_deregister(&lis3->miscdev);
 754        input_unregister_polled_device(lis3->idev);
 755        input_free_polled_device(lis3->idev);
 756        lis3->idev = NULL;
 757}
 758EXPORT_SYMBOL_GPL(lis3lv02d_joystick_disable);
 759
 760/* Sysfs stuff */
 761static void lis3lv02d_sysfs_poweron(struct lis3lv02d *lis3)
 762{
 763        /*
 764         * SYSFS functions are fast visitors so put-call
 765         * immediately after the get-call. However, keep
 766         * chip running for a while and schedule delayed
 767         * suspend. This way periodic sysfs calls doesn't
 768         * suffer from relatively long power up time.
 769         */
 770
 771        if (lis3->pm_dev) {
 772                pm_runtime_get_sync(lis3->pm_dev);
 773                pm_runtime_put_noidle(lis3->pm_dev);
 774                pm_schedule_suspend(lis3->pm_dev, LIS3_SYSFS_POWERDOWN_DELAY);
 775        }
 776}
 777
 778static ssize_t lis3lv02d_selftest_show(struct device *dev,
 779                                struct device_attribute *attr, char *buf)
 780{
 781        struct lis3lv02d *lis3 = dev_get_drvdata(dev);
 782        s16 values[3];
 783
 784        static const char ok[] = "OK";
 785        static const char fail[] = "FAIL";
 786        static const char irq[] = "FAIL_IRQ";
 787        const char *res;
 788
 789        lis3lv02d_sysfs_poweron(lis3);
 790        switch (lis3lv02d_selftest(lis3, values)) {
 791        case SELFTEST_FAIL:
 792                res = fail;
 793                break;
 794        case SELFTEST_IRQ:
 795                res = irq;
 796                break;
 797        case SELFTEST_OK:
 798        default:
 799                res = ok;
 800                break;
 801        }
 802        return sprintf(buf, "%s %d %d %d\n", res,
 803                values[0], values[1], values[2]);
 804}
 805
 806static ssize_t lis3lv02d_position_show(struct device *dev,
 807                                struct device_attribute *attr, char *buf)
 808{
 809        struct lis3lv02d *lis3 = dev_get_drvdata(dev);
 810        int x, y, z;
 811
 812        lis3lv02d_sysfs_poweron(lis3);
 813        mutex_lock(&lis3->mutex);
 814        lis3lv02d_get_xyz(lis3, &x, &y, &z);
 815        mutex_unlock(&lis3->mutex);
 816        return sprintf(buf, "(%d,%d,%d)\n", x, y, z);
 817}
 818
 819static ssize_t lis3lv02d_rate_show(struct device *dev,
 820                        struct device_attribute *attr, char *buf)
 821{
 822        struct lis3lv02d *lis3 = dev_get_drvdata(dev);
 823
 824        lis3lv02d_sysfs_poweron(lis3);
 825        return sprintf(buf, "%d\n", lis3lv02d_get_odr(lis3));
 826}
 827
 828static ssize_t lis3lv02d_rate_set(struct device *dev,
 829                                struct device_attribute *attr, const char *buf,
 830                                size_t count)
 831{
 832        struct lis3lv02d *lis3 = dev_get_drvdata(dev);
 833        unsigned long rate;
 834
 835        if (strict_strtoul(buf, 0, &rate))
 836                return -EINVAL;
 837
 838        lis3lv02d_sysfs_poweron(lis3);
 839        if (lis3lv02d_set_odr(lis3, rate))
 840                return -EINVAL;
 841
 842        return count;
 843}
 844
 845static DEVICE_ATTR(selftest, S_IRUSR, lis3lv02d_selftest_show, NULL);
 846static DEVICE_ATTR(position, S_IRUGO, lis3lv02d_position_show, NULL);
 847static DEVICE_ATTR(rate, S_IRUGO | S_IWUSR, lis3lv02d_rate_show,
 848                                            lis3lv02d_rate_set);
 849
 850static struct attribute *lis3lv02d_attributes[] = {
 851        &dev_attr_selftest.attr,
 852        &dev_attr_position.attr,
 853        &dev_attr_rate.attr,
 854        NULL
 855};
 856
 857static struct attribute_group lis3lv02d_attribute_group = {
 858        .attrs = lis3lv02d_attributes
 859};
 860
 861
 862static int lis3lv02d_add_fs(struct lis3lv02d *lis3)
 863{
 864        lis3->pdev = platform_device_register_simple(DRIVER_NAME, -1, NULL, 0);
 865        if (IS_ERR(lis3->pdev))
 866                return PTR_ERR(lis3->pdev);
 867
 868        platform_set_drvdata(lis3->pdev, lis3);
 869        return sysfs_create_group(&lis3->pdev->dev.kobj, &lis3lv02d_attribute_group);
 870}
 871
 872int lis3lv02d_remove_fs(struct lis3lv02d *lis3)
 873{
 874        sysfs_remove_group(&lis3->pdev->dev.kobj, &lis3lv02d_attribute_group);
 875        platform_device_unregister(lis3->pdev);
 876        if (lis3->pm_dev) {
 877                /* Barrier after the sysfs remove */
 878                pm_runtime_barrier(lis3->pm_dev);
 879
 880                /* SYSFS may have left chip running. Turn off if necessary */
 881                if (!pm_runtime_suspended(lis3->pm_dev))
 882                        lis3lv02d_poweroff(lis3);
 883
 884                pm_runtime_disable(lis3->pm_dev);
 885                pm_runtime_set_suspended(lis3->pm_dev);
 886        }
 887        kfree(lis3->reg_cache);
 888        return 0;
 889}
 890EXPORT_SYMBOL_GPL(lis3lv02d_remove_fs);
 891
 892static void lis3lv02d_8b_configure(struct lis3lv02d *lis3,
 893                                struct lis3lv02d_platform_data *p)
 894{
 895        int err;
 896        int ctrl2 = p->hipass_ctrl;
 897
 898        if (p->click_flags) {
 899                lis3->write(lis3, CLICK_CFG, p->click_flags);
 900                lis3->write(lis3, CLICK_TIMELIMIT, p->click_time_limit);
 901                lis3->write(lis3, CLICK_LATENCY, p->click_latency);
 902                lis3->write(lis3, CLICK_WINDOW, p->click_window);
 903                lis3->write(lis3, CLICK_THSZ, p->click_thresh_z & 0xf);
 904                lis3->write(lis3, CLICK_THSY_X,
 905                        (p->click_thresh_x & 0xf) |
 906                        (p->click_thresh_y << 4));
 907
 908                if (lis3->idev) {
 909                        struct input_dev *input_dev = lis3->idev->input;
 910                        input_set_capability(input_dev, EV_KEY, BTN_X);
 911                        input_set_capability(input_dev, EV_KEY, BTN_Y);
 912                        input_set_capability(input_dev, EV_KEY, BTN_Z);
 913                }
 914        }
 915
 916        if (p->wakeup_flags) {
 917                lis3->write(lis3, FF_WU_CFG_1, p->wakeup_flags);
 918                lis3->write(lis3, FF_WU_THS_1, p->wakeup_thresh & 0x7f);
 919                /* pdata value + 1 to keep this backward compatible*/
 920                lis3->write(lis3, FF_WU_DURATION_1, p->duration1 + 1);
 921                ctrl2 ^= HP_FF_WU1; /* Xor to keep compatible with old pdata*/
 922        }
 923
 924        if (p->wakeup_flags2) {
 925                lis3->write(lis3, FF_WU_CFG_2, p->wakeup_flags2);
 926                lis3->write(lis3, FF_WU_THS_2, p->wakeup_thresh2 & 0x7f);
 927                /* pdata value + 1 to keep this backward compatible*/
 928                lis3->write(lis3, FF_WU_DURATION_2, p->duration2 + 1);
 929                ctrl2 ^= HP_FF_WU2; /* Xor to keep compatible with old pdata*/
 930        }
 931        /* Configure hipass filters */
 932        lis3->write(lis3, CTRL_REG2, ctrl2);
 933
 934        if (p->irq2) {
 935                err = request_threaded_irq(p->irq2,
 936                                        NULL,
 937                                        lis302dl_interrupt_thread2_8b,
 938                                        IRQF_TRIGGER_RISING | IRQF_ONESHOT |
 939                                        (p->irq_flags2 & IRQF_TRIGGER_MASK),
 940                                        DRIVER_NAME, lis3);
 941                if (err < 0)
 942                        pr_err("No second IRQ. Limited functionality\n");
 943        }
 944}
 945
 946#ifdef CONFIG_OF
 947int lis3lv02d_init_dt(struct lis3lv02d *lis3)
 948{
 949        struct lis3lv02d_platform_data *pdata;
 950        struct device_node *np = lis3->of_node;
 951        u32 val;
 952
 953        if (!lis3->of_node)
 954                return 0;
 955
 956        pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);
 957        if (!pdata)
 958                return -ENOMEM;
 959
 960        if (of_get_property(np, "st,click-single-x", NULL))
 961                pdata->click_flags |= LIS3_CLICK_SINGLE_X;
 962        if (of_get_property(np, "st,click-double-x", NULL))
 963                pdata->click_flags |= LIS3_CLICK_DOUBLE_X;
 964
 965        if (of_get_property(np, "st,click-single-y", NULL))
 966                pdata->click_flags |= LIS3_CLICK_SINGLE_Y;
 967        if (of_get_property(np, "st,click-double-y", NULL))
 968                pdata->click_flags |= LIS3_CLICK_DOUBLE_Y;
 969
 970        if (of_get_property(np, "st,click-single-z", NULL))
 971                pdata->click_flags |= LIS3_CLICK_SINGLE_Z;
 972        if (of_get_property(np, "st,click-double-z", NULL))
 973                pdata->click_flags |= LIS3_CLICK_DOUBLE_Z;
 974
 975        if (!of_property_read_u32(np, "st,click-threshold-x", &val))
 976                pdata->click_thresh_x = val;
 977        if (!of_property_read_u32(np, "st,click-threshold-y", &val))
 978                pdata->click_thresh_y = val;
 979        if (!of_property_read_u32(np, "st,click-threshold-z", &val))
 980                pdata->click_thresh_z = val;
 981
 982        if (!of_property_read_u32(np, "st,click-time-limit", &val))
 983                pdata->click_time_limit = val;
 984        if (!of_property_read_u32(np, "st,click-latency", &val))
 985                pdata->click_latency = val;
 986        if (!of_property_read_u32(np, "st,click-window", &val))
 987                pdata->click_window = val;
 988
 989        if (of_get_property(np, "st,irq1-disable", NULL))
 990                pdata->irq_cfg |= LIS3_IRQ1_DISABLE;
 991        if (of_get_property(np, "st,irq1-ff-wu-1", NULL))
 992                pdata->irq_cfg |= LIS3_IRQ1_FF_WU_1;
 993        if (of_get_property(np, "st,irq1-ff-wu-2", NULL))
 994                pdata->irq_cfg |= LIS3_IRQ1_FF_WU_2;
 995        if (of_get_property(np, "st,irq1-data-ready", NULL))
 996                pdata->irq_cfg |= LIS3_IRQ1_DATA_READY;
 997        if (of_get_property(np, "st,irq1-click", NULL))
 998                pdata->irq_cfg |= LIS3_IRQ1_CLICK;
 999
1000        if (of_get_property(np, "st,irq2-disable", NULL))
1001                pdata->irq_cfg |= LIS3_IRQ2_DISABLE;
1002        if (of_get_property(np, "st,irq2-ff-wu-1", NULL))
1003                pdata->irq_cfg |= LIS3_IRQ2_FF_WU_1;
1004        if (of_get_property(np, "st,irq2-ff-wu-2", NULL))
1005                pdata->irq_cfg |= LIS3_IRQ2_FF_WU_2;
1006        if (of_get_property(np, "st,irq2-data-ready", NULL))
1007                pdata->irq_cfg |= LIS3_IRQ2_DATA_READY;
1008        if (of_get_property(np, "st,irq2-click", NULL))
1009                pdata->irq_cfg |= LIS3_IRQ2_CLICK;
1010
1011        if (of_get_property(np, "st,irq-open-drain", NULL))
1012                pdata->irq_cfg |= LIS3_IRQ_OPEN_DRAIN;
1013        if (of_get_property(np, "st,irq-active-low", NULL))
1014                pdata->irq_cfg |= LIS3_IRQ_ACTIVE_LOW;
1015
1016        if (!of_property_read_u32(np, "st,wu-duration-1", &val))
1017                pdata->duration1 = val;
1018        if (!of_property_read_u32(np, "st,wu-duration-2", &val))
1019                pdata->duration2 = val;
1020
1021        if (of_get_property(np, "st,wakeup-x-lo", NULL))
1022                pdata->wakeup_flags |= LIS3_WAKEUP_X_LO;
1023        if (of_get_property(np, "st,wakeup-x-hi", NULL))
1024                pdata->wakeup_flags |= LIS3_WAKEUP_X_HI;
1025        if (of_get_property(np, "st,wakeup-y-lo", NULL))
1026                pdata->wakeup_flags |= LIS3_WAKEUP_Y_LO;
1027        if (of_get_property(np, "st,wakeup-y-hi", NULL))
1028                pdata->wakeup_flags |= LIS3_WAKEUP_Y_HI;
1029        if (of_get_property(np, "st,wakeup-z-lo", NULL))
1030                pdata->wakeup_flags |= LIS3_WAKEUP_Z_LO;
1031        if (of_get_property(np, "st,wakeup-z-hi", NULL))
1032                pdata->wakeup_flags |= LIS3_WAKEUP_Z_HI;
1033
1034        if (!of_property_read_u32(np, "st,highpass-cutoff-hz", &val)) {
1035                switch (val) {
1036                case 1:
1037                        pdata->hipass_ctrl = LIS3_HIPASS_CUTFF_1HZ;
1038                        break;
1039                case 2:
1040                        pdata->hipass_ctrl = LIS3_HIPASS_CUTFF_2HZ;
1041                        break;
1042                case 4:
1043                        pdata->hipass_ctrl = LIS3_HIPASS_CUTFF_4HZ;
1044                        break;
1045                case 8:
1046                        pdata->hipass_ctrl = LIS3_HIPASS_CUTFF_8HZ;
1047                        break;
1048                }
1049        }
1050
1051        if (of_get_property(np, "st,hipass1-disable", NULL))
1052                pdata->hipass_ctrl |= LIS3_HIPASS1_DISABLE;
1053        if (of_get_property(np, "st,hipass2-disable", NULL))
1054                pdata->hipass_ctrl |= LIS3_HIPASS2_DISABLE;
1055
1056        if (of_get_property(np, "st,axis-x", &val))
1057                pdata->axis_x = val;
1058        if (of_get_property(np, "st,axis-y", &val))
1059                pdata->axis_y = val;
1060        if (of_get_property(np, "st,axis-z", &val))
1061                pdata->axis_z = val;
1062
1063        if (of_get_property(np, "st,default-rate", NULL))
1064                pdata->default_rate = val;
1065
1066        if (of_get_property(np, "st,min-limit-x", &val))
1067                pdata->st_min_limits[0] = val;
1068        if (of_get_property(np, "st,min-limit-y", &val))
1069                pdata->st_min_limits[1] = val;
1070        if (of_get_property(np, "st,min-limit-z", &val))
1071                pdata->st_min_limits[2] = val;
1072
1073        if (of_get_property(np, "st,max-limit-x", &val))
1074                pdata->st_max_limits[0] = val;
1075        if (of_get_property(np, "st,max-limit-y", &val))
1076                pdata->st_max_limits[1] = val;
1077        if (of_get_property(np, "st,max-limit-z", &val))
1078                pdata->st_max_limits[2] = val;
1079
1080
1081        lis3->pdata = pdata;
1082
1083        return 0;
1084}
1085
1086#else
1087int lis3lv02d_init_dt(struct lis3lv02d *lis3)
1088{
1089        return 0;
1090}
1091#endif
1092EXPORT_SYMBOL_GPL(lis3lv02d_init_dt);
1093
1094/*
1095 * Initialise the accelerometer and the various subsystems.
1096 * Should be rather independent of the bus system.
1097 */
1098int lis3lv02d_init_device(struct lis3lv02d *lis3)
1099{
1100        int err;
1101        irq_handler_t thread_fn;
1102        int irq_flags = 0;
1103
1104        lis3->whoami = lis3lv02d_read_8(lis3, WHO_AM_I);
1105
1106        switch (lis3->whoami) {
1107        case WAI_12B:
1108                pr_info("12 bits sensor found\n");
1109                lis3->read_data = lis3lv02d_read_12;
1110                lis3->mdps_max_val = 2048;
1111                lis3->pwron_delay = LIS3_PWRON_DELAY_WAI_12B;
1112                lis3->odrs = lis3_12_rates;
1113                lis3->odr_mask = CTRL1_DF0 | CTRL1_DF1;
1114                lis3->scale = LIS3_SENSITIVITY_12B;
1115                lis3->regs = lis3_wai12_regs;
1116                lis3->regs_size = ARRAY_SIZE(lis3_wai12_regs);
1117                break;
1118        case WAI_8B:
1119                pr_info("8 bits sensor found\n");
1120                lis3->read_data = lis3lv02d_read_8;
1121                lis3->mdps_max_val = 128;
1122                lis3->pwron_delay = LIS3_PWRON_DELAY_WAI_8B;
1123                lis3->odrs = lis3_8_rates;
1124                lis3->odr_mask = CTRL1_DR;
1125                lis3->scale = LIS3_SENSITIVITY_8B;
1126                lis3->regs = lis3_wai8_regs;
1127                lis3->regs_size = ARRAY_SIZE(lis3_wai8_regs);
1128                break;
1129        case WAI_3DC:
1130                pr_info("8 bits 3DC sensor found\n");
1131                lis3->read_data = lis3lv02d_read_8;
1132                lis3->mdps_max_val = 128;
1133                lis3->pwron_delay = LIS3_PWRON_DELAY_WAI_8B;
1134                lis3->odrs = lis3_3dc_rates;
1135                lis3->odr_mask = CTRL1_ODR0|CTRL1_ODR1|CTRL1_ODR2|CTRL1_ODR3;
1136                lis3->scale = LIS3_SENSITIVITY_8B;
1137                break;
1138        case WAI_3DLH:
1139                pr_info("16 bits lis331dlh sensor found\n");
1140                lis3->read_data = lis331dlh_read_data;
1141                lis3->mdps_max_val = 2048; /* 12 bits for 2G */
1142                lis3->shift_adj = SHIFT_ADJ_2G;
1143                lis3->pwron_delay = LIS3_PWRON_DELAY_WAI_8B;
1144                lis3->odrs = lis3_3dlh_rates;
1145                lis3->odr_mask = CTRL1_DR0 | CTRL1_DR1;
1146                lis3->scale = LIS3DLH_SENSITIVITY_2G;
1147                break;
1148        default:
1149                pr_err("unknown sensor type 0x%X\n", lis3->whoami);
1150                return -EINVAL;
1151        }
1152
1153        lis3->reg_cache = kzalloc(max(sizeof(lis3_wai8_regs),
1154                                     sizeof(lis3_wai12_regs)), GFP_KERNEL);
1155
1156        if (lis3->reg_cache == NULL) {
1157                printk(KERN_ERR DRIVER_NAME "out of memory\n");
1158                return -ENOMEM;
1159        }
1160
1161        mutex_init(&lis3->mutex);
1162        atomic_set(&lis3->wake_thread, 0);
1163
1164        lis3lv02d_add_fs(lis3);
1165        err = lis3lv02d_poweron(lis3);
1166        if (err) {
1167                lis3lv02d_remove_fs(lis3);
1168                return err;
1169        }
1170
1171        if (lis3->pm_dev) {
1172                pm_runtime_set_active(lis3->pm_dev);
1173                pm_runtime_enable(lis3->pm_dev);
1174        }
1175
1176        if (lis3lv02d_joystick_enable(lis3))
1177                pr_err("joystick initialization failed\n");
1178
1179        /* passing in platform specific data is purely optional and only
1180         * used by the SPI transport layer at the moment */
1181        if (lis3->pdata) {
1182                struct lis3lv02d_platform_data *p = lis3->pdata;
1183
1184                if (lis3->whoami == WAI_8B)
1185                        lis3lv02d_8b_configure(lis3, p);
1186
1187                irq_flags = p->irq_flags1 & IRQF_TRIGGER_MASK;
1188
1189                lis3->irq_cfg = p->irq_cfg;
1190                if (p->irq_cfg)
1191                        lis3->write(lis3, CTRL_REG3, p->irq_cfg);
1192
1193                if (p->default_rate)
1194                        lis3lv02d_set_odr(lis3, p->default_rate);
1195        }
1196
1197        /* bail if we did not get an IRQ from the bus layer */
1198        if (!lis3->irq) {
1199                pr_debug("No IRQ. Disabling /dev/freefall\n");
1200                goto out;
1201        }
1202
1203        /*
1204         * The sensor can generate interrupts for free-fall and direction
1205         * detection (distinguishable with FF_WU_SRC and DD_SRC) but to keep
1206         * the things simple and _fast_ we activate it only for free-fall, so
1207         * no need to read register (very slow with ACPI). For the same reason,
1208         * we forbid shared interrupts.
1209         *
1210         * IRQF_TRIGGER_RISING seems pointless on HP laptops because the
1211         * io-apic is not configurable (and generates a warning) but I keep it
1212         * in case of support for other hardware.
1213         */
1214        if (lis3->pdata && lis3->whoami == WAI_8B)
1215                thread_fn = lis302dl_interrupt_thread1_8b;
1216        else
1217                thread_fn = NULL;
1218
1219        err = request_threaded_irq(lis3->irq, lis302dl_interrupt,
1220                                thread_fn,
1221                                IRQF_TRIGGER_RISING | IRQF_ONESHOT |
1222                                irq_flags,
1223                                DRIVER_NAME, lis3);
1224
1225        if (err < 0) {
1226                pr_err("Cannot get IRQ\n");
1227                goto out;
1228        }
1229
1230        lis3->miscdev.minor     = MISC_DYNAMIC_MINOR;
1231        lis3->miscdev.name      = "freefall";
1232        lis3->miscdev.fops      = &lis3lv02d_misc_fops;
1233
1234        if (misc_register(&lis3->miscdev))
1235                pr_err("misc_register failed\n");
1236out:
1237        return 0;
1238}
1239EXPORT_SYMBOL_GPL(lis3lv02d_init_device);
1240
1241MODULE_DESCRIPTION("ST LIS3LV02Dx three-axis digital accelerometer driver");
1242MODULE_AUTHOR("Yan Burman, Eric Piel, Pavel Machek");
1243MODULE_LICENSE("GPL");
1244