linux/drivers/net/ethernet/8390/pcnet_cs.c
<<
>>
Prefs
   1/*======================================================================
   2
   3    A PCMCIA ethernet driver for NS8390-based cards
   4
   5    This driver supports the D-Link DE-650 and Linksys EthernetCard
   6    cards, the newer D-Link and Linksys combo cards, Accton EN2212
   7    cards, the RPTI EP400, and the PreMax PE-200 in non-shared-memory
   8    mode, and the IBM Credit Card Adapter, the NE4100, the Thomas
   9    Conrad ethernet card, and the Kingston KNE-PCM/x in shared-memory
  10    mode.  It will also handle the Socket EA card in either mode.
  11
  12    Copyright (C) 1999 David A. Hinds -- dahinds@users.sourceforge.net
  13
  14    pcnet_cs.c 1.153 2003/11/09 18:53:09
  15
  16    The network driver code is based on Donald Becker's NE2000 code:
  17
  18    Written 1992,1993 by Donald Becker.
  19    Copyright 1993 United States Government as represented by the
  20    Director, National Security Agency.  This software may be used and
  21    distributed according to the terms of the GNU General Public License,
  22    incorporated herein by reference.
  23    Donald Becker may be reached at becker@scyld.com
  24
  25    Based also on Keith Moore's changes to Don Becker's code, for IBM
  26    CCAE support.  Drivers merged back together, and shared-memory
  27    Socket EA support added, by Ken Raeburn, September 1995.
  28
  29======================================================================*/
  30
  31#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
  32
  33#include <linux/kernel.h>
  34#include <linux/module.h>
  35#include <linux/init.h>
  36#include <linux/ptrace.h>
  37#include <linux/string.h>
  38#include <linux/timer.h>
  39#include <linux/delay.h>
  40#include <linux/netdevice.h>
  41#include <linux/log2.h>
  42#include <linux/etherdevice.h>
  43#include <linux/mii.h>
  44#include "8390.h"
  45
  46#include <pcmcia/cistpl.h>
  47#include <pcmcia/ciscode.h>
  48#include <pcmcia/ds.h>
  49#include <pcmcia/cisreg.h>
  50
  51#include <asm/io.h>
  52#include <asm/byteorder.h>
  53#include <asm/uaccess.h>
  54
  55#define PCNET_CMD       0x00
  56#define PCNET_DATAPORT  0x10    /* NatSemi-defined port window offset. */
  57#define PCNET_RESET     0x1f    /* Issue a read to reset, a write to clear. */
  58#define PCNET_MISC      0x18    /* For IBM CCAE and Socket EA cards */
  59
  60#define PCNET_START_PG  0x40    /* First page of TX buffer */
  61#define PCNET_STOP_PG   0x80    /* Last page +1 of RX ring */
  62
  63/* Socket EA cards have a larger packet buffer */
  64#define SOCKET_START_PG 0x01
  65#define SOCKET_STOP_PG  0xff
  66
  67#define PCNET_RDC_TIMEOUT (2*HZ/100)    /* Max wait in jiffies for Tx RDC */
  68
  69static const char *if_names[] = { "auto", "10baseT", "10base2"};
  70
  71
  72/*====================================================================*/
  73
  74/* Module parameters */
  75
  76MODULE_AUTHOR("David Hinds <dahinds@users.sourceforge.net>");
  77MODULE_DESCRIPTION("NE2000 compatible PCMCIA ethernet driver");
  78MODULE_LICENSE("GPL");
  79
  80#define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0)
  81
  82INT_MODULE_PARM(if_port,        1);     /* Transceiver type */
  83INT_MODULE_PARM(use_big_buf,    1);     /* use 64K packet buffer? */
  84INT_MODULE_PARM(mem_speed,      0);     /* shared mem speed, in ns */
  85INT_MODULE_PARM(delay_output,   0);     /* pause after xmit? */
  86INT_MODULE_PARM(delay_time,     4);     /* in usec */
  87INT_MODULE_PARM(use_shmem,      -1);    /* use shared memory? */
  88INT_MODULE_PARM(full_duplex,    0);     /* full duplex? */
  89
  90/* Ugh!  Let the user hardwire the hardware address for queer cards */
  91static int hw_addr[6] = { 0, /* ... */ };
  92module_param_array(hw_addr, int, NULL, 0);
  93
  94/*====================================================================*/
  95
  96static void mii_phy_probe(struct net_device *dev);
  97static int pcnet_config(struct pcmcia_device *link);
  98static void pcnet_release(struct pcmcia_device *link);
  99static int pcnet_open(struct net_device *dev);
 100static int pcnet_close(struct net_device *dev);
 101static int ei_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
 102static irqreturn_t ei_irq_wrapper(int irq, void *dev_id);
 103static void ei_watchdog(u_long arg);
 104static void pcnet_reset_8390(struct net_device *dev);
 105static int set_config(struct net_device *dev, struct ifmap *map);
 106static int setup_shmem_window(struct pcmcia_device *link, int start_pg,
 107                              int stop_pg, int cm_offset);
 108static int setup_dma_config(struct pcmcia_device *link, int start_pg,
 109                            int stop_pg);
 110
 111static void pcnet_detach(struct pcmcia_device *p_dev);
 112
 113/*====================================================================*/
 114
 115typedef struct hw_info_t {
 116    u_int       offset;
 117    u_char      a0, a1, a2;
 118    u_int       flags;
 119} hw_info_t;
 120
 121#define DELAY_OUTPUT    0x01
 122#define HAS_MISC_REG    0x02
 123#define USE_BIG_BUF     0x04
 124#define HAS_IBM_MISC    0x08
 125#define IS_DL10019      0x10
 126#define IS_DL10022      0x20
 127#define HAS_MII         0x40
 128#define USE_SHMEM       0x80    /* autodetected */
 129
 130#define AM79C9XX_HOME_PHY       0x00006B90  /* HomePNA PHY */
 131#define AM79C9XX_ETH_PHY        0x00006B70  /* 10baseT PHY */
 132#define MII_PHYID_REV_MASK      0xfffffff0
 133#define MII_PHYID_REG1          0x02
 134#define MII_PHYID_REG2          0x03
 135
 136static hw_info_t hw_info[] = {
 137    { /* Accton EN2212 */ 0x0ff0, 0x00, 0x00, 0xe8, DELAY_OUTPUT },
 138    { /* Allied Telesis LA-PCM */ 0x0ff0, 0x00, 0x00, 0xf4, 0 },
 139    { /* APEX MultiCard */ 0x03f4, 0x00, 0x20, 0xe5, 0 },
 140    { /* ASANTE FriendlyNet */ 0x4910, 0x00, 0x00, 0x94,
 141      DELAY_OUTPUT | HAS_IBM_MISC },
 142    { /* Danpex EN-6200P2 */ 0x0110, 0x00, 0x40, 0xc7, 0 },
 143    { /* DataTrek NetCard */ 0x0ff0, 0x00, 0x20, 0xe8, 0 },
 144    { /* Dayna CommuniCard E */ 0x0110, 0x00, 0x80, 0x19, 0 },
 145    { /* D-Link DE-650 */ 0x0040, 0x00, 0x80, 0xc8, 0 },
 146    { /* EP-210 Ethernet */ 0x0110, 0x00, 0x40, 0x33, 0 },
 147    { /* EP4000 Ethernet */ 0x01c0, 0x00, 0x00, 0xb4, 0 },
 148    { /* Epson EEN10B */ 0x0ff0, 0x00, 0x00, 0x48,
 149      HAS_MISC_REG | HAS_IBM_MISC },
 150    { /* ELECOM Laneed LD-CDWA */ 0xb8, 0x08, 0x00, 0x42, 0 },
 151    { /* Hypertec Ethernet */ 0x01c0, 0x00, 0x40, 0x4c, 0 },
 152    { /* IBM CCAE */ 0x0ff0, 0x08, 0x00, 0x5a,
 153      HAS_MISC_REG | HAS_IBM_MISC },
 154    { /* IBM CCAE */ 0x0ff0, 0x00, 0x04, 0xac,
 155      HAS_MISC_REG | HAS_IBM_MISC },
 156    { /* IBM CCAE */ 0x0ff0, 0x00, 0x06, 0x29,
 157      HAS_MISC_REG | HAS_IBM_MISC },
 158    { /* IBM FME */ 0x0374, 0x08, 0x00, 0x5a,
 159      HAS_MISC_REG | HAS_IBM_MISC },
 160    { /* IBM FME */ 0x0374, 0x00, 0x04, 0xac,
 161      HAS_MISC_REG | HAS_IBM_MISC },
 162    { /* Kansai KLA-PCM/T */ 0x0ff0, 0x00, 0x60, 0x87,
 163      HAS_MISC_REG | HAS_IBM_MISC },
 164    { /* NSC DP83903 */ 0x0374, 0x08, 0x00, 0x17,
 165      HAS_MISC_REG | HAS_IBM_MISC },
 166    { /* NSC DP83903 */ 0x0374, 0x00, 0xc0, 0xa8,
 167      HAS_MISC_REG | HAS_IBM_MISC },
 168    { /* NSC DP83903 */ 0x0374, 0x00, 0xa0, 0xb0,
 169      HAS_MISC_REG | HAS_IBM_MISC },
 170    { /* NSC DP83903 */ 0x0198, 0x00, 0x20, 0xe0,
 171      HAS_MISC_REG | HAS_IBM_MISC },
 172    { /* I-O DATA PCLA/T */ 0x0ff0, 0x00, 0xa0, 0xb0, 0 },
 173    { /* Katron PE-520 */ 0x0110, 0x00, 0x40, 0xf6, 0 },
 174    { /* Kingston KNE-PCM/x */ 0x0ff0, 0x00, 0xc0, 0xf0,
 175      HAS_MISC_REG | HAS_IBM_MISC },
 176    { /* Kingston KNE-PCM/x */ 0x0ff0, 0xe2, 0x0c, 0x0f,
 177      HAS_MISC_REG | HAS_IBM_MISC },
 178    { /* Kingston KNE-PC2 */ 0x0180, 0x00, 0xc0, 0xf0, 0 },
 179    { /* Maxtech PCN2000 */ 0x5000, 0x00, 0x00, 0xe8, 0 },
 180    { /* NDC Instant-Link */ 0x003a, 0x00, 0x80, 0xc6, 0 },
 181    { /* NE2000 Compatible */ 0x0ff0, 0x00, 0xa0, 0x0c, 0 },
 182    { /* Network General Sniffer */ 0x0ff0, 0x00, 0x00, 0x65,
 183      HAS_MISC_REG | HAS_IBM_MISC },
 184    { /* Panasonic VEL211 */ 0x0ff0, 0x00, 0x80, 0x45,
 185      HAS_MISC_REG | HAS_IBM_MISC },
 186    { /* PreMax PE-200 */ 0x07f0, 0x00, 0x20, 0xe0, 0 },
 187    { /* RPTI EP400 */ 0x0110, 0x00, 0x40, 0x95, 0 },
 188    { /* SCM Ethernet */ 0x0ff0, 0x00, 0x20, 0xcb, 0 },
 189    { /* Socket EA */ 0x4000, 0x00, 0xc0, 0x1b,
 190      DELAY_OUTPUT | HAS_MISC_REG | USE_BIG_BUF },
 191    { /* Socket LP-E CF+ */ 0x01c0, 0x00, 0xc0, 0x1b, 0 },
 192    { /* SuperSocket RE450T */ 0x0110, 0x00, 0xe0, 0x98, 0 },
 193    { /* Volktek NPL-402CT */ 0x0060, 0x00, 0x40, 0x05, 0 },
 194    { /* NEC PC-9801N-J12 */ 0x0ff0, 0x00, 0x00, 0x4c, 0 },
 195    { /* PCMCIA Technology OEM */ 0x01c8, 0x00, 0xa0, 0x0c, 0 }
 196};
 197
 198#define NR_INFO         ARRAY_SIZE(hw_info)
 199
 200static hw_info_t default_info = { 0, 0, 0, 0, 0 };
 201static hw_info_t dl10019_info = { 0, 0, 0, 0, IS_DL10019|HAS_MII };
 202static hw_info_t dl10022_info = { 0, 0, 0, 0, IS_DL10022|HAS_MII };
 203
 204typedef struct pcnet_dev_t {
 205        struct pcmcia_device    *p_dev;
 206    u_int               flags;
 207    void                __iomem *base;
 208    struct timer_list   watchdog;
 209    int                 stale, fast_poll;
 210    u_char              phy_id;
 211    u_char              eth_phy, pna_phy;
 212    u_short             link_status;
 213    u_long              mii_reset;
 214} pcnet_dev_t;
 215
 216static inline pcnet_dev_t *PRIV(struct net_device *dev)
 217{
 218        char *p = netdev_priv(dev);
 219        return (pcnet_dev_t *)(p + sizeof(struct ei_device));
 220}
 221
 222static const struct net_device_ops pcnet_netdev_ops = {
 223        .ndo_open               = pcnet_open,
 224        .ndo_stop               = pcnet_close,
 225        .ndo_set_config         = set_config,
 226        .ndo_start_xmit         = ei_start_xmit,
 227        .ndo_get_stats          = ei_get_stats,
 228        .ndo_do_ioctl           = ei_ioctl,
 229        .ndo_set_rx_mode        = ei_set_multicast_list,
 230        .ndo_tx_timeout         = ei_tx_timeout,
 231        .ndo_change_mtu         = eth_change_mtu,
 232        .ndo_set_mac_address    = eth_mac_addr,
 233        .ndo_validate_addr      = eth_validate_addr,
 234#ifdef CONFIG_NET_POLL_CONTROLLER
 235        .ndo_poll_controller    = ei_poll,
 236#endif
 237};
 238
 239static int pcnet_probe(struct pcmcia_device *link)
 240{
 241    pcnet_dev_t *info;
 242    struct net_device *dev;
 243
 244    dev_dbg(&link->dev, "pcnet_attach()\n");
 245
 246    /* Create new ethernet device */
 247    dev = __alloc_ei_netdev(sizeof(pcnet_dev_t));
 248    if (!dev) return -ENOMEM;
 249    info = PRIV(dev);
 250    info->p_dev = link;
 251    link->priv = dev;
 252
 253    link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO;
 254
 255    dev->netdev_ops = &pcnet_netdev_ops;
 256
 257    return pcnet_config(link);
 258} /* pcnet_attach */
 259
 260static void pcnet_detach(struct pcmcia_device *link)
 261{
 262        struct net_device *dev = link->priv;
 263
 264        dev_dbg(&link->dev, "pcnet_detach\n");
 265
 266        unregister_netdev(dev);
 267
 268        pcnet_release(link);
 269
 270        free_netdev(dev);
 271} /* pcnet_detach */
 272
 273/*======================================================================
 274
 275    This probes for a card's hardware address, for card types that
 276    encode this information in their CIS.
 277
 278======================================================================*/
 279
 280static hw_info_t *get_hwinfo(struct pcmcia_device *link)
 281{
 282    struct net_device *dev = link->priv;
 283    u_char __iomem *base, *virt;
 284    int i, j;
 285
 286    /* Allocate a small memory window */
 287    link->resource[2]->flags |= WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE;
 288    link->resource[2]->start = 0; link->resource[2]->end = 0;
 289    i = pcmcia_request_window(link, link->resource[2], 0);
 290    if (i != 0)
 291        return NULL;
 292
 293    virt = ioremap(link->resource[2]->start,
 294            resource_size(link->resource[2]));
 295    for (i = 0; i < NR_INFO; i++) {
 296        pcmcia_map_mem_page(link, link->resource[2],
 297                hw_info[i].offset & ~(resource_size(link->resource[2])-1));
 298        base = &virt[hw_info[i].offset & (resource_size(link->resource[2])-1)];
 299        if ((readb(base+0) == hw_info[i].a0) &&
 300            (readb(base+2) == hw_info[i].a1) &&
 301            (readb(base+4) == hw_info[i].a2)) {
 302                for (j = 0; j < 6; j++)
 303                    dev->dev_addr[j] = readb(base + (j<<1));
 304                break;
 305        }
 306    }
 307
 308    iounmap(virt);
 309    j = pcmcia_release_window(link, link->resource[2]);
 310    return (i < NR_INFO) ? hw_info+i : NULL;
 311} /* get_hwinfo */
 312
 313/*======================================================================
 314
 315    This probes for a card's hardware address by reading the PROM.
 316    It checks the address against a list of known types, then falls
 317    back to a simple NE2000 clone signature check.
 318
 319======================================================================*/
 320
 321static hw_info_t *get_prom(struct pcmcia_device *link)
 322{
 323    struct net_device *dev = link->priv;
 324    unsigned int ioaddr = dev->base_addr;
 325    u_char prom[32];
 326    int i, j;
 327
 328    /* This is lifted straight from drivers/net/ethernet/8390/ne.c */
 329    struct {
 330        u_char value, offset;
 331    } program_seq[] = {
 332        {E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD}, /* Select page 0*/
 333        {0x48,  EN0_DCFG},      /* Set byte-wide (0x48) access. */
 334        {0x00,  EN0_RCNTLO},    /* Clear the count regs. */
 335        {0x00,  EN0_RCNTHI},
 336        {0x00,  EN0_IMR},       /* Mask completion irq. */
 337        {0xFF,  EN0_ISR},
 338        {E8390_RXOFF, EN0_RXCR},        /* 0x20  Set to monitor */
 339        {E8390_TXOFF, EN0_TXCR},        /* 0x02  and loopback mode. */
 340        {32,    EN0_RCNTLO},
 341        {0x00,  EN0_RCNTHI},
 342        {0x00,  EN0_RSARLO},    /* DMA starting at 0x0000. */
 343        {0x00,  EN0_RSARHI},
 344        {E8390_RREAD+E8390_START, E8390_CMD},
 345    };
 346
 347    pcnet_reset_8390(dev);
 348    mdelay(10);
 349
 350    for (i = 0; i < ARRAY_SIZE(program_seq); i++)
 351        outb_p(program_seq[i].value, ioaddr + program_seq[i].offset);
 352
 353    for (i = 0; i < 32; i++)
 354        prom[i] = inb(ioaddr + PCNET_DATAPORT);
 355    for (i = 0; i < NR_INFO; i++) {
 356        if ((prom[0] == hw_info[i].a0) &&
 357            (prom[2] == hw_info[i].a1) &&
 358            (prom[4] == hw_info[i].a2))
 359            break;
 360    }
 361    if ((i < NR_INFO) || ((prom[28] == 0x57) && (prom[30] == 0x57))) {
 362        for (j = 0; j < 6; j++)
 363            dev->dev_addr[j] = prom[j<<1];
 364        return (i < NR_INFO) ? hw_info+i : &default_info;
 365    }
 366    return NULL;
 367} /* get_prom */
 368
 369/*======================================================================
 370
 371    For DL10019 based cards, like the Linksys EtherFast
 372
 373======================================================================*/
 374
 375static hw_info_t *get_dl10019(struct pcmcia_device *link)
 376{
 377    struct net_device *dev = link->priv;
 378    int i;
 379    u_char sum;
 380
 381    for (sum = 0, i = 0x14; i < 0x1c; i++)
 382        sum += inb_p(dev->base_addr + i);
 383    if (sum != 0xff)
 384        return NULL;
 385    for (i = 0; i < 6; i++)
 386        dev->dev_addr[i] = inb_p(dev->base_addr + 0x14 + i);
 387    i = inb(dev->base_addr + 0x1f);
 388    return ((i == 0x91)||(i == 0x99)) ? &dl10022_info : &dl10019_info;
 389}
 390
 391/*======================================================================
 392
 393    For Asix AX88190 based cards
 394
 395======================================================================*/
 396
 397static hw_info_t *get_ax88190(struct pcmcia_device *link)
 398{
 399    struct net_device *dev = link->priv;
 400    unsigned int ioaddr = dev->base_addr;
 401    int i, j;
 402
 403    /* Not much of a test, but the alternatives are messy */
 404    if (link->config_base != 0x03c0)
 405        return NULL;
 406
 407    outb_p(0x01, ioaddr + EN0_DCFG);    /* Set word-wide access. */
 408    outb_p(0x00, ioaddr + EN0_RSARLO);  /* DMA starting at 0x0400. */
 409    outb_p(0x04, ioaddr + EN0_RSARHI);
 410    outb_p(E8390_RREAD+E8390_START, ioaddr + E8390_CMD);
 411
 412    for (i = 0; i < 6; i += 2) {
 413        j = inw(ioaddr + PCNET_DATAPORT);
 414        dev->dev_addr[i] = j & 0xff;
 415        dev->dev_addr[i+1] = j >> 8;
 416    }
 417    return NULL;
 418}
 419
 420/*======================================================================
 421
 422    This should be totally unnecessary... but when we can't figure
 423    out the hardware address any other way, we'll let the user hard
 424    wire it when the module is initialized.
 425
 426======================================================================*/
 427
 428static hw_info_t *get_hwired(struct pcmcia_device *link)
 429{
 430    struct net_device *dev = link->priv;
 431    int i;
 432
 433    for (i = 0; i < 6; i++)
 434        if (hw_addr[i] != 0) break;
 435    if (i == 6)
 436        return NULL;
 437
 438    for (i = 0; i < 6; i++)
 439        dev->dev_addr[i] = hw_addr[i];
 440
 441    return &default_info;
 442} /* get_hwired */
 443
 444static int try_io_port(struct pcmcia_device *link)
 445{
 446    int j, ret;
 447    link->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
 448    link->resource[1]->flags &= ~IO_DATA_PATH_WIDTH;
 449    if (link->resource[0]->end == 32) {
 450        link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
 451        if (link->resource[1]->end > 0) {
 452            /* for master/slave multifunction cards */
 453            link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
 454        }
 455    } else {
 456        /* This should be two 16-port windows */
 457        link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
 458        link->resource[1]->flags |= IO_DATA_PATH_WIDTH_16;
 459    }
 460    if (link->resource[0]->start == 0) {
 461        for (j = 0; j < 0x400; j += 0x20) {
 462            link->resource[0]->start = j ^ 0x300;
 463            link->resource[1]->start = (j ^ 0x300) + 0x10;
 464            link->io_lines = 16;
 465            ret = pcmcia_request_io(link);
 466            if (ret == 0)
 467                    return ret;
 468        }
 469        return ret;
 470    } else {
 471        return pcmcia_request_io(link);
 472    }
 473}
 474
 475static int pcnet_confcheck(struct pcmcia_device *p_dev, void *priv_data)
 476{
 477        int *priv = priv_data;
 478        int try = (*priv & 0x1);
 479
 480        *priv &= (p_dev->resource[2]->end >= 0x4000) ? 0x10 : ~0x10;
 481
 482        if (p_dev->config_index == 0)
 483                return -EINVAL;
 484
 485        if (p_dev->resource[0]->end + p_dev->resource[1]->end < 32)
 486                return -EINVAL;
 487
 488        if (try)
 489                p_dev->io_lines = 16;
 490        return try_io_port(p_dev);
 491}
 492
 493static hw_info_t *pcnet_try_config(struct pcmcia_device *link,
 494                                   int *has_shmem, int try)
 495{
 496        struct net_device *dev = link->priv;
 497        hw_info_t *local_hw_info;
 498        pcnet_dev_t *info = PRIV(dev);
 499        int priv = try;
 500        int ret;
 501
 502        ret = pcmcia_loop_config(link, pcnet_confcheck, &priv);
 503        if (ret) {
 504                dev_warn(&link->dev, "no useable port range found\n");
 505                return NULL;
 506        }
 507        *has_shmem = (priv & 0x10);
 508
 509        if (!link->irq)
 510                return NULL;
 511
 512        if (resource_size(link->resource[1]) == 8)
 513                link->config_flags |= CONF_ENABLE_SPKR;
 514
 515        if ((link->manf_id == MANFID_IBM) &&
 516            (link->card_id == PRODID_IBM_HOME_AND_AWAY))
 517                link->config_index |= 0x10;
 518
 519        ret = pcmcia_enable_device(link);
 520        if (ret)
 521                return NULL;
 522
 523        dev->irq = link->irq;
 524        dev->base_addr = link->resource[0]->start;
 525
 526        if (info->flags & HAS_MISC_REG) {
 527                if ((if_port == 1) || (if_port == 2))
 528                        dev->if_port = if_port;
 529                else
 530                        dev_notice(&link->dev, "invalid if_port requested\n");
 531        } else
 532                dev->if_port = 0;
 533
 534        if ((link->config_base == 0x03c0) &&
 535            (link->manf_id == 0x149) && (link->card_id == 0xc1ab)) {
 536                dev_info(&link->dev,
 537                        "this is an AX88190 card - use axnet_cs instead.\n");
 538                return NULL;
 539        }
 540
 541        local_hw_info = get_hwinfo(link);
 542        if (!local_hw_info)
 543                local_hw_info = get_prom(link);
 544        if (!local_hw_info)
 545                local_hw_info = get_dl10019(link);
 546        if (!local_hw_info)
 547                local_hw_info = get_ax88190(link);
 548        if (!local_hw_info)
 549                local_hw_info = get_hwired(link);
 550
 551        return local_hw_info;
 552}
 553
 554static int pcnet_config(struct pcmcia_device *link)
 555{
 556    struct net_device *dev = link->priv;
 557    pcnet_dev_t *info = PRIV(dev);
 558    int start_pg, stop_pg, cm_offset;
 559    int has_shmem = 0;
 560    hw_info_t *local_hw_info;
 561
 562    dev_dbg(&link->dev, "pcnet_config\n");
 563
 564    local_hw_info = pcnet_try_config(link, &has_shmem, 0);
 565    if (!local_hw_info) {
 566            /* check whether forcing io_lines to 16 helps... */
 567            pcmcia_disable_device(link);
 568            local_hw_info = pcnet_try_config(link, &has_shmem, 1);
 569            if (local_hw_info == NULL) {
 570                    dev_notice(&link->dev, "unable to read hardware net"
 571                            " address for io base %#3lx\n", dev->base_addr);
 572                    goto failed;
 573            }
 574    }
 575
 576    info->flags = local_hw_info->flags;
 577    /* Check for user overrides */
 578    info->flags |= (delay_output) ? DELAY_OUTPUT : 0;
 579    if ((link->manf_id == MANFID_SOCKET) &&
 580        ((link->card_id == PRODID_SOCKET_LPE) ||
 581         (link->card_id == PRODID_SOCKET_LPE_CF) ||
 582         (link->card_id == PRODID_SOCKET_EIO)))
 583        info->flags &= ~USE_BIG_BUF;
 584    if (!use_big_buf)
 585        info->flags &= ~USE_BIG_BUF;
 586
 587    if (info->flags & USE_BIG_BUF) {
 588        start_pg = SOCKET_START_PG;
 589        stop_pg = SOCKET_STOP_PG;
 590        cm_offset = 0x10000;
 591    } else {
 592        start_pg = PCNET_START_PG;
 593        stop_pg = PCNET_STOP_PG;
 594        cm_offset = 0;
 595    }
 596
 597    /* has_shmem is ignored if use_shmem != -1 */
 598    if ((use_shmem == 0) || (!has_shmem && (use_shmem == -1)) ||
 599        (setup_shmem_window(link, start_pg, stop_pg, cm_offset) != 0))
 600        setup_dma_config(link, start_pg, stop_pg);
 601
 602    ei_status.name = "NE2000";
 603    ei_status.word16 = 1;
 604    ei_status.reset_8390 = pcnet_reset_8390;
 605
 606    if (info->flags & (IS_DL10019|IS_DL10022))
 607        mii_phy_probe(dev);
 608
 609    SET_NETDEV_DEV(dev, &link->dev);
 610
 611    if (register_netdev(dev) != 0) {
 612        pr_notice("register_netdev() failed\n");
 613        goto failed;
 614    }
 615
 616    if (info->flags & (IS_DL10019|IS_DL10022)) {
 617        u_char id = inb(dev->base_addr + 0x1a);
 618        netdev_info(dev, "NE2000 (DL100%d rev %02x): ",
 619               (info->flags & IS_DL10022) ? 22 : 19, id);
 620        if (info->pna_phy)
 621            pr_cont("PNA, ");
 622    } else {
 623        netdev_info(dev, "NE2000 Compatible: ");
 624    }
 625    pr_cont("io %#3lx, irq %d,", dev->base_addr, dev->irq);
 626    if (info->flags & USE_SHMEM)
 627        pr_cont(" mem %#5lx,", dev->mem_start);
 628    if (info->flags & HAS_MISC_REG)
 629        pr_cont(" %s xcvr,", if_names[dev->if_port]);
 630    pr_cont(" hw_addr %pM\n", dev->dev_addr);
 631    return 0;
 632
 633failed:
 634    pcnet_release(link);
 635    return -ENODEV;
 636} /* pcnet_config */
 637
 638static void pcnet_release(struct pcmcia_device *link)
 639{
 640        pcnet_dev_t *info = PRIV(link->priv);
 641
 642        dev_dbg(&link->dev, "pcnet_release\n");
 643
 644        if (info->flags & USE_SHMEM)
 645                iounmap(info->base);
 646
 647        pcmcia_disable_device(link);
 648}
 649
 650static int pcnet_suspend(struct pcmcia_device *link)
 651{
 652        struct net_device *dev = link->priv;
 653
 654        if (link->open)
 655                netif_device_detach(dev);
 656
 657        return 0;
 658}
 659
 660static int pcnet_resume(struct pcmcia_device *link)
 661{
 662        struct net_device *dev = link->priv;
 663
 664        if (link->open) {
 665                pcnet_reset_8390(dev);
 666                NS8390_init(dev, 1);
 667                netif_device_attach(dev);
 668        }
 669
 670        return 0;
 671}
 672
 673
 674/*======================================================================
 675
 676    MII interface support for DL10019 and DL10022 based cards
 677
 678    On the DL10019, the MII IO direction bit is 0x10; on the DL10022
 679    it is 0x20.  Setting both bits seems to work on both card types.
 680
 681======================================================================*/
 682
 683#define DLINK_GPIO              0x1c
 684#define DLINK_DIAG              0x1d
 685#define DLINK_EEPROM            0x1e
 686
 687#define MDIO_SHIFT_CLK          0x80
 688#define MDIO_DATA_OUT           0x40
 689#define MDIO_DIR_WRITE          0x30
 690#define MDIO_DATA_WRITE0        (MDIO_DIR_WRITE)
 691#define MDIO_DATA_WRITE1        (MDIO_DIR_WRITE | MDIO_DATA_OUT)
 692#define MDIO_DATA_READ          0x10
 693#define MDIO_MASK               0x0f
 694
 695static void mdio_sync(unsigned int addr)
 696{
 697    int bits, mask = inb(addr) & MDIO_MASK;
 698    for (bits = 0; bits < 32; bits++) {
 699        outb(mask | MDIO_DATA_WRITE1, addr);
 700        outb(mask | MDIO_DATA_WRITE1 | MDIO_SHIFT_CLK, addr);
 701    }
 702}
 703
 704static int mdio_read(unsigned int addr, int phy_id, int loc)
 705{
 706    u_int cmd = (0x06<<10)|(phy_id<<5)|loc;
 707    int i, retval = 0, mask = inb(addr) & MDIO_MASK;
 708
 709    mdio_sync(addr);
 710    for (i = 13; i >= 0; i--) {
 711        int dat = (cmd&(1<<i)) ? MDIO_DATA_WRITE1 : MDIO_DATA_WRITE0;
 712        outb(mask | dat, addr);
 713        outb(mask | dat | MDIO_SHIFT_CLK, addr);
 714    }
 715    for (i = 19; i > 0; i--) {
 716        outb(mask, addr);
 717        retval = (retval << 1) | ((inb(addr) & MDIO_DATA_READ) != 0);
 718        outb(mask | MDIO_SHIFT_CLK, addr);
 719    }
 720    return (retval>>1) & 0xffff;
 721}
 722
 723static void mdio_write(unsigned int addr, int phy_id, int loc, int value)
 724{
 725    u_int cmd = (0x05<<28)|(phy_id<<23)|(loc<<18)|(1<<17)|value;
 726    int i, mask = inb(addr) & MDIO_MASK;
 727
 728    mdio_sync(addr);
 729    for (i = 31; i >= 0; i--) {
 730        int dat = (cmd&(1<<i)) ? MDIO_DATA_WRITE1 : MDIO_DATA_WRITE0;
 731        outb(mask | dat, addr);
 732        outb(mask | dat | MDIO_SHIFT_CLK, addr);
 733    }
 734    for (i = 1; i >= 0; i--) {
 735        outb(mask, addr);
 736        outb(mask | MDIO_SHIFT_CLK, addr);
 737    }
 738}
 739
 740/*======================================================================
 741
 742    EEPROM access routines for DL10019 and DL10022 based cards
 743
 744======================================================================*/
 745
 746#define EE_EEP          0x40
 747#define EE_ASIC         0x10
 748#define EE_CS           0x08
 749#define EE_CK           0x04
 750#define EE_DO           0x02
 751#define EE_DI           0x01
 752#define EE_ADOT         0x01    /* DataOut for ASIC */
 753#define EE_READ_CMD     0x06
 754
 755#define DL19FDUPLX      0x0400  /* DL10019 Full duplex mode */
 756
 757static int read_eeprom(unsigned int ioaddr, int location)
 758{
 759    int i, retval = 0;
 760    unsigned int ee_addr = ioaddr + DLINK_EEPROM;
 761    int read_cmd = location | (EE_READ_CMD << 8);
 762
 763    outb(0, ee_addr);
 764    outb(EE_EEP|EE_CS, ee_addr);
 765
 766    /* Shift the read command bits out. */
 767    for (i = 10; i >= 0; i--) {
 768        short dataval = (read_cmd & (1 << i)) ? EE_DO : 0;
 769        outb_p(EE_EEP|EE_CS|dataval, ee_addr);
 770        outb_p(EE_EEP|EE_CS|dataval|EE_CK, ee_addr);
 771    }
 772    outb(EE_EEP|EE_CS, ee_addr);
 773
 774    for (i = 16; i > 0; i--) {
 775        outb_p(EE_EEP|EE_CS | EE_CK, ee_addr);
 776        retval = (retval << 1) | ((inb(ee_addr) & EE_DI) ? 1 : 0);
 777        outb_p(EE_EEP|EE_CS, ee_addr);
 778    }
 779
 780    /* Terminate the EEPROM access. */
 781    outb(0, ee_addr);
 782    return retval;
 783}
 784
 785/*
 786    The internal ASIC registers can be changed by EEPROM READ access
 787    with EE_ASIC bit set.
 788    In ASIC mode, EE_ADOT is used to output the data to the ASIC.
 789*/
 790
 791static void write_asic(unsigned int ioaddr, int location, short asic_data)
 792{
 793        int i;
 794        unsigned int ee_addr = ioaddr + DLINK_EEPROM;
 795        short dataval;
 796        int read_cmd = location | (EE_READ_CMD << 8);
 797
 798        asic_data |= read_eeprom(ioaddr, location);
 799
 800        outb(0, ee_addr);
 801        outb(EE_ASIC|EE_CS|EE_DI, ee_addr);
 802
 803        read_cmd = read_cmd >> 1;
 804
 805        /* Shift the read command bits out. */
 806        for (i = 9; i >= 0; i--) {
 807                dataval = (read_cmd & (1 << i)) ? EE_DO : 0;
 808                outb_p(EE_ASIC|EE_CS|EE_DI|dataval, ee_addr);
 809                outb_p(EE_ASIC|EE_CS|EE_DI|dataval|EE_CK, ee_addr);
 810                outb_p(EE_ASIC|EE_CS|EE_DI|dataval, ee_addr);
 811        }
 812        // sync
 813        outb(EE_ASIC|EE_CS, ee_addr);
 814        outb(EE_ASIC|EE_CS|EE_CK, ee_addr);
 815        outb(EE_ASIC|EE_CS, ee_addr);
 816
 817        for (i = 15; i >= 0; i--) {
 818                dataval = (asic_data & (1 << i)) ? EE_ADOT : 0;
 819                outb_p(EE_ASIC|EE_CS|dataval, ee_addr);
 820                outb_p(EE_ASIC|EE_CS|dataval|EE_CK, ee_addr);
 821                outb_p(EE_ASIC|EE_CS|dataval, ee_addr);
 822        }
 823
 824        /* Terminate the ASIC access. */
 825        outb(EE_ASIC|EE_DI, ee_addr);
 826        outb(EE_ASIC|EE_DI| EE_CK, ee_addr);
 827        outb(EE_ASIC|EE_DI, ee_addr);
 828
 829        outb(0, ee_addr);
 830}
 831
 832/*====================================================================*/
 833
 834static void set_misc_reg(struct net_device *dev)
 835{
 836    unsigned int nic_base = dev->base_addr;
 837    pcnet_dev_t *info = PRIV(dev);
 838    u_char tmp;
 839
 840    if (info->flags & HAS_MISC_REG) {
 841        tmp = inb_p(nic_base + PCNET_MISC) & ~3;
 842        if (dev->if_port == 2)
 843            tmp |= 1;
 844        if (info->flags & USE_BIG_BUF)
 845            tmp |= 2;
 846        if (info->flags & HAS_IBM_MISC)
 847            tmp |= 8;
 848        outb_p(tmp, nic_base + PCNET_MISC);
 849    }
 850    if (info->flags & IS_DL10022) {
 851        if (info->flags & HAS_MII) {
 852            /* Advertise 100F, 100H, 10F, 10H */
 853            mdio_write(nic_base + DLINK_GPIO, info->eth_phy, 4, 0x01e1);
 854            /* Restart MII autonegotiation */
 855            mdio_write(nic_base + DLINK_GPIO, info->eth_phy, 0, 0x0000);
 856            mdio_write(nic_base + DLINK_GPIO, info->eth_phy, 0, 0x1200);
 857            info->mii_reset = jiffies;
 858        } else {
 859            outb(full_duplex ? 4 : 0, nic_base + DLINK_DIAG);
 860        }
 861    } else if (info->flags & IS_DL10019) {
 862        /* Advertise 100F, 100H, 10F, 10H */
 863        mdio_write(nic_base + DLINK_GPIO, info->eth_phy, 4, 0x01e1);
 864        /* Restart MII autonegotiation */
 865        mdio_write(nic_base + DLINK_GPIO, info->eth_phy, 0, 0x0000);
 866        mdio_write(nic_base + DLINK_GPIO, info->eth_phy, 0, 0x1200);
 867    }
 868}
 869
 870/*====================================================================*/
 871
 872static void mii_phy_probe(struct net_device *dev)
 873{
 874    pcnet_dev_t *info = PRIV(dev);
 875    unsigned int mii_addr = dev->base_addr + DLINK_GPIO;
 876    int i;
 877    u_int tmp, phyid;
 878
 879    for (i = 31; i >= 0; i--) {
 880        tmp = mdio_read(mii_addr, i, 1);
 881        if ((tmp == 0) || (tmp == 0xffff))
 882            continue;
 883        tmp = mdio_read(mii_addr, i, MII_PHYID_REG1);
 884        phyid = tmp << 16;
 885        phyid |= mdio_read(mii_addr, i, MII_PHYID_REG2);
 886        phyid &= MII_PHYID_REV_MASK;
 887        netdev_dbg(dev, "MII at %d is 0x%08x\n", i, phyid);
 888        if (phyid == AM79C9XX_HOME_PHY) {
 889            info->pna_phy = i;
 890        } else if (phyid != AM79C9XX_ETH_PHY) {
 891            info->eth_phy = i;
 892        }
 893    }
 894}
 895
 896static int pcnet_open(struct net_device *dev)
 897{
 898    int ret;
 899    pcnet_dev_t *info = PRIV(dev);
 900    struct pcmcia_device *link = info->p_dev;
 901    unsigned int nic_base = dev->base_addr;
 902
 903    dev_dbg(&link->dev, "pcnet_open('%s')\n", dev->name);
 904
 905    if (!pcmcia_dev_present(link))
 906        return -ENODEV;
 907
 908    set_misc_reg(dev);
 909
 910    outb_p(0xFF, nic_base + EN0_ISR); /* Clear bogus intr. */
 911    ret = request_irq(dev->irq, ei_irq_wrapper, IRQF_SHARED, dev->name, dev);
 912    if (ret)
 913            return ret;
 914
 915    link->open++;
 916
 917    info->phy_id = info->eth_phy;
 918    info->link_status = 0x00;
 919    init_timer(&info->watchdog);
 920    info->watchdog.function = ei_watchdog;
 921    info->watchdog.data = (u_long)dev;
 922    info->watchdog.expires = jiffies + HZ;
 923    add_timer(&info->watchdog);
 924
 925    return ei_open(dev);
 926} /* pcnet_open */
 927
 928/*====================================================================*/
 929
 930static int pcnet_close(struct net_device *dev)
 931{
 932    pcnet_dev_t *info = PRIV(dev);
 933    struct pcmcia_device *link = info->p_dev;
 934
 935    dev_dbg(&link->dev, "pcnet_close('%s')\n", dev->name);
 936
 937    ei_close(dev);
 938    free_irq(dev->irq, dev);
 939
 940    link->open--;
 941    netif_stop_queue(dev);
 942    del_timer_sync(&info->watchdog);
 943
 944    return 0;
 945} /* pcnet_close */
 946
 947/*======================================================================
 948
 949    Hard reset the card.  This used to pause for the same period that
 950    a 8390 reset command required, but that shouldn't be necessary.
 951
 952======================================================================*/
 953
 954static void pcnet_reset_8390(struct net_device *dev)
 955{
 956    unsigned int nic_base = dev->base_addr;
 957    int i;
 958
 959    ei_status.txing = ei_status.dmaing = 0;
 960
 961    outb_p(E8390_NODMA+E8390_PAGE0+E8390_STOP, nic_base + E8390_CMD);
 962
 963    outb(inb(nic_base + PCNET_RESET), nic_base + PCNET_RESET);
 964
 965    for (i = 0; i < 100; i++) {
 966        if ((inb_p(nic_base+EN0_ISR) & ENISR_RESET) != 0)
 967            break;
 968        udelay(100);
 969    }
 970    outb_p(ENISR_RESET, nic_base + EN0_ISR); /* Ack intr. */
 971
 972    if (i == 100)
 973        netdev_err(dev, "pcnet_reset_8390() did not complete.\n");
 974
 975    set_misc_reg(dev);
 976
 977} /* pcnet_reset_8390 */
 978
 979/*====================================================================*/
 980
 981static int set_config(struct net_device *dev, struct ifmap *map)
 982{
 983    pcnet_dev_t *info = PRIV(dev);
 984    if ((map->port != (u_char)(-1)) && (map->port != dev->if_port)) {
 985        if (!(info->flags & HAS_MISC_REG))
 986            return -EOPNOTSUPP;
 987        else if ((map->port < 1) || (map->port > 2))
 988            return -EINVAL;
 989        dev->if_port = map->port;
 990        netdev_info(dev, "switched to %s port\n", if_names[dev->if_port]);
 991        NS8390_init(dev, 1);
 992    }
 993    return 0;
 994}
 995
 996/*====================================================================*/
 997
 998static irqreturn_t ei_irq_wrapper(int irq, void *dev_id)
 999{
1000    struct net_device *dev = dev_id;
1001    pcnet_dev_t *info;
1002    irqreturn_t ret = ei_interrupt(irq, dev_id);
1003
1004    if (ret == IRQ_HANDLED) {
1005            info = PRIV(dev);
1006            info->stale = 0;
1007    }
1008    return ret;
1009}
1010
1011static void ei_watchdog(u_long arg)
1012{
1013    struct net_device *dev = (struct net_device *)arg;
1014    pcnet_dev_t *info = PRIV(dev);
1015    unsigned int nic_base = dev->base_addr;
1016    unsigned int mii_addr = nic_base + DLINK_GPIO;
1017    u_short link;
1018
1019    if (!netif_device_present(dev)) goto reschedule;
1020
1021    /* Check for pending interrupt with expired latency timer: with
1022       this, we can limp along even if the interrupt is blocked */
1023    if (info->stale++ && (inb_p(nic_base + EN0_ISR) & ENISR_ALL)) {
1024        if (!info->fast_poll)
1025            netdev_info(dev, "interrupt(s) dropped!\n");
1026        ei_irq_wrapper(dev->irq, dev);
1027        info->fast_poll = HZ;
1028    }
1029    if (info->fast_poll) {
1030        info->fast_poll--;
1031        info->watchdog.expires = jiffies + 1;
1032        add_timer(&info->watchdog);
1033        return;
1034    }
1035
1036    if (!(info->flags & HAS_MII))
1037        goto reschedule;
1038
1039    mdio_read(mii_addr, info->phy_id, 1);
1040    link = mdio_read(mii_addr, info->phy_id, 1);
1041    if (!link || (link == 0xffff)) {
1042        if (info->eth_phy) {
1043            info->phy_id = info->eth_phy = 0;
1044        } else {
1045            netdev_info(dev, "MII is missing!\n");
1046            info->flags &= ~HAS_MII;
1047        }
1048        goto reschedule;
1049    }
1050
1051    link &= 0x0004;
1052    if (link != info->link_status) {
1053        u_short p = mdio_read(mii_addr, info->phy_id, 5);
1054        netdev_info(dev, "%s link beat\n", link ? "found" : "lost");
1055        if (link && (info->flags & IS_DL10022)) {
1056            /* Disable collision detection on full duplex links */
1057            outb((p & 0x0140) ? 4 : 0, nic_base + DLINK_DIAG);
1058        } else if (link && (info->flags & IS_DL10019)) {
1059            /* Disable collision detection on full duplex links */
1060            write_asic(dev->base_addr, 4, (p & 0x140) ? DL19FDUPLX : 0);
1061        }
1062        if (link) {
1063            if (info->phy_id == info->eth_phy) {
1064                if (p)
1065                    netdev_info(dev, "autonegotiation complete: "
1066                           "%sbaseT-%cD selected\n",
1067                           ((p & 0x0180) ? "100" : "10"),
1068                           ((p & 0x0140) ? 'F' : 'H'));
1069                else
1070                    netdev_info(dev, "link partner did not autonegotiate\n");
1071            }
1072            NS8390_init(dev, 1);
1073        }
1074        info->link_status = link;
1075    }
1076    if (info->pna_phy && time_after(jiffies, info->mii_reset + 6*HZ)) {
1077        link = mdio_read(mii_addr, info->eth_phy, 1) & 0x0004;
1078        if (((info->phy_id == info->pna_phy) && link) ||
1079            ((info->phy_id != info->pna_phy) && !link)) {
1080            /* isolate this MII and try flipping to the other one */
1081            mdio_write(mii_addr, info->phy_id, 0, 0x0400);
1082            info->phy_id ^= info->pna_phy ^ info->eth_phy;
1083            netdev_info(dev, "switched to %s transceiver\n",
1084                   (info->phy_id == info->eth_phy) ? "ethernet" : "PNA");
1085            mdio_write(mii_addr, info->phy_id, 0,
1086                       (info->phy_id == info->eth_phy) ? 0x1000 : 0);
1087            info->link_status = 0;
1088            info->mii_reset = jiffies;
1089        }
1090    }
1091
1092reschedule:
1093    info->watchdog.expires = jiffies + HZ;
1094    add_timer(&info->watchdog);
1095}
1096
1097/*====================================================================*/
1098
1099
1100static int ei_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
1101{
1102    pcnet_dev_t *info = PRIV(dev);
1103    struct mii_ioctl_data *data = if_mii(rq);
1104    unsigned int mii_addr = dev->base_addr + DLINK_GPIO;
1105
1106    if (!(info->flags & (IS_DL10019|IS_DL10022)))
1107        return -EINVAL;
1108
1109    switch (cmd) {
1110    case SIOCGMIIPHY:
1111        data->phy_id = info->phy_id;
1112    case SIOCGMIIREG:           /* Read MII PHY register. */
1113        data->val_out = mdio_read(mii_addr, data->phy_id, data->reg_num & 0x1f);
1114        return 0;
1115    case SIOCSMIIREG:           /* Write MII PHY register. */
1116        mdio_write(mii_addr, data->phy_id, data->reg_num & 0x1f, data->val_in);
1117        return 0;
1118    }
1119    return -EOPNOTSUPP;
1120}
1121
1122/*====================================================================*/
1123
1124static void dma_get_8390_hdr(struct net_device *dev,
1125                             struct e8390_pkt_hdr *hdr,
1126                             int ring_page)
1127{
1128    unsigned int nic_base = dev->base_addr;
1129
1130    if (ei_status.dmaing) {
1131        netdev_notice(dev, "DMAing conflict in dma_block_input."
1132               "[DMAstat:%1x][irqlock:%1x]\n",
1133               ei_status.dmaing, ei_status.irqlock);
1134        return;
1135    }
1136
1137    ei_status.dmaing |= 0x01;
1138    outb_p(E8390_NODMA+E8390_PAGE0+E8390_START, nic_base + PCNET_CMD);
1139    outb_p(sizeof(struct e8390_pkt_hdr), nic_base + EN0_RCNTLO);
1140    outb_p(0, nic_base + EN0_RCNTHI);
1141    outb_p(0, nic_base + EN0_RSARLO);           /* On page boundary */
1142    outb_p(ring_page, nic_base + EN0_RSARHI);
1143    outb_p(E8390_RREAD+E8390_START, nic_base + PCNET_CMD);
1144
1145    insw(nic_base + PCNET_DATAPORT, hdr,
1146            sizeof(struct e8390_pkt_hdr)>>1);
1147    /* Fix for big endian systems */
1148    hdr->count = le16_to_cpu(hdr->count);
1149
1150    outb_p(ENISR_RDC, nic_base + EN0_ISR);      /* Ack intr. */
1151    ei_status.dmaing &= ~0x01;
1152}
1153
1154/*====================================================================*/
1155
1156static void dma_block_input(struct net_device *dev, int count,
1157                            struct sk_buff *skb, int ring_offset)
1158{
1159    unsigned int nic_base = dev->base_addr;
1160    int xfer_count = count;
1161    char *buf = skb->data;
1162
1163    if ((ei_debug > 4) && (count != 4))
1164        netdev_dbg(dev, "[bi=%d]\n", count+4);
1165    if (ei_status.dmaing) {
1166        netdev_notice(dev, "DMAing conflict in dma_block_input."
1167               "[DMAstat:%1x][irqlock:%1x]\n",
1168               ei_status.dmaing, ei_status.irqlock);
1169        return;
1170    }
1171    ei_status.dmaing |= 0x01;
1172    outb_p(E8390_NODMA+E8390_PAGE0+E8390_START, nic_base + PCNET_CMD);
1173    outb_p(count & 0xff, nic_base + EN0_RCNTLO);
1174    outb_p(count >> 8, nic_base + EN0_RCNTHI);
1175    outb_p(ring_offset & 0xff, nic_base + EN0_RSARLO);
1176    outb_p(ring_offset >> 8, nic_base + EN0_RSARHI);
1177    outb_p(E8390_RREAD+E8390_START, nic_base + PCNET_CMD);
1178
1179    insw(nic_base + PCNET_DATAPORT,buf,count>>1);
1180    if (count & 0x01)
1181        buf[count-1] = inb(nic_base + PCNET_DATAPORT), xfer_count++;
1182
1183    /* This was for the ALPHA version only, but enough people have been
1184       encountering problems that it is still here. */
1185#ifdef PCMCIA_DEBUG
1186    if (ei_debug > 4) {         /* DMA termination address check... */
1187        int addr, tries = 20;
1188        do {
1189            /* DON'T check for 'inb_p(EN0_ISR) & ENISR_RDC' here
1190               -- it's broken for Rx on some cards! */
1191            int high = inb_p(nic_base + EN0_RSARHI);
1192            int low = inb_p(nic_base + EN0_RSARLO);
1193            addr = (high << 8) + low;
1194            if (((ring_offset + xfer_count) & 0xff) == (addr & 0xff))
1195                break;
1196        } while (--tries > 0);
1197        if (tries <= 0)
1198            netdev_notice(dev, "RX transfer address mismatch,"
1199                   "%#4.4x (expected) vs. %#4.4x (actual).\n",
1200                   ring_offset + xfer_count, addr);
1201    }
1202#endif
1203    outb_p(ENISR_RDC, nic_base + EN0_ISR);      /* Ack intr. */
1204    ei_status.dmaing &= ~0x01;
1205} /* dma_block_input */
1206
1207/*====================================================================*/
1208
1209static void dma_block_output(struct net_device *dev, int count,
1210                             const u_char *buf, const int start_page)
1211{
1212    unsigned int nic_base = dev->base_addr;
1213    pcnet_dev_t *info = PRIV(dev);
1214#ifdef PCMCIA_DEBUG
1215    int retries = 0;
1216#endif
1217    u_long dma_start;
1218
1219#ifdef PCMCIA_DEBUG
1220    if (ei_debug > 4)
1221        netdev_dbg(dev, "[bo=%d]\n", count);
1222#endif
1223
1224    /* Round the count up for word writes.  Do we need to do this?
1225       What effect will an odd byte count have on the 8390?
1226       I should check someday. */
1227    if (count & 0x01)
1228        count++;
1229    if (ei_status.dmaing) {
1230        netdev_notice(dev, "DMAing conflict in dma_block_output."
1231               "[DMAstat:%1x][irqlock:%1x]\n",
1232               ei_status.dmaing, ei_status.irqlock);
1233        return;
1234    }
1235    ei_status.dmaing |= 0x01;
1236    /* We should already be in page 0, but to be safe... */
1237    outb_p(E8390_PAGE0+E8390_START+E8390_NODMA, nic_base+PCNET_CMD);
1238
1239#ifdef PCMCIA_DEBUG
1240  retry:
1241#endif
1242
1243    outb_p(ENISR_RDC, nic_base + EN0_ISR);
1244
1245    /* Now the normal output. */
1246    outb_p(count & 0xff, nic_base + EN0_RCNTLO);
1247    outb_p(count >> 8,   nic_base + EN0_RCNTHI);
1248    outb_p(0x00, nic_base + EN0_RSARLO);
1249    outb_p(start_page, nic_base + EN0_RSARHI);
1250
1251    outb_p(E8390_RWRITE+E8390_START, nic_base + PCNET_CMD);
1252    outsw(nic_base + PCNET_DATAPORT, buf, count>>1);
1253
1254    dma_start = jiffies;
1255
1256#ifdef PCMCIA_DEBUG
1257    /* This was for the ALPHA version only, but enough people have been
1258       encountering problems that it is still here. */
1259    if (ei_debug > 4) { /* DMA termination address check... */
1260        int addr, tries = 20;
1261        do {
1262            int high = inb_p(nic_base + EN0_RSARHI);
1263            int low = inb_p(nic_base + EN0_RSARLO);
1264            addr = (high << 8) + low;
1265            if ((start_page << 8) + count == addr)
1266                break;
1267        } while (--tries > 0);
1268        if (tries <= 0) {
1269            netdev_notice(dev, "Tx packet transfer address mismatch,"
1270                   "%#4.4x (expected) vs. %#4.4x (actual).\n",
1271                   (start_page << 8) + count, addr);
1272            if (retries++ == 0)
1273                goto retry;
1274        }
1275    }
1276#endif
1277
1278    while ((inb_p(nic_base + EN0_ISR) & ENISR_RDC) == 0)
1279        if (time_after(jiffies, dma_start + PCNET_RDC_TIMEOUT)) {
1280            netdev_notice(dev, "timeout waiting for Tx RDC.\n");
1281            pcnet_reset_8390(dev);
1282            NS8390_init(dev, 1);
1283            break;
1284        }
1285
1286    outb_p(ENISR_RDC, nic_base + EN0_ISR);      /* Ack intr. */
1287    if (info->flags & DELAY_OUTPUT)
1288        udelay((long)delay_time);
1289    ei_status.dmaing &= ~0x01;
1290}
1291
1292/*====================================================================*/
1293
1294static int setup_dma_config(struct pcmcia_device *link, int start_pg,
1295                            int stop_pg)
1296{
1297    struct net_device *dev = link->priv;
1298
1299    ei_status.tx_start_page = start_pg;
1300    ei_status.rx_start_page = start_pg + TX_PAGES;
1301    ei_status.stop_page = stop_pg;
1302
1303    /* set up block i/o functions */
1304    ei_status.get_8390_hdr = dma_get_8390_hdr;
1305    ei_status.block_input = dma_block_input;
1306    ei_status.block_output = dma_block_output;
1307
1308    return 0;
1309}
1310
1311/*====================================================================*/
1312
1313static void copyin(void *dest, void __iomem *src, int c)
1314{
1315    u_short *d = dest;
1316    u_short __iomem *s = src;
1317    int odd;
1318
1319    if (c <= 0)
1320        return;
1321    odd = (c & 1); c >>= 1;
1322
1323    if (c) {
1324        do { *d++ = __raw_readw(s++); } while (--c);
1325    }
1326    /* get last byte by fetching a word and masking */
1327    if (odd)
1328        *((u_char *)d) = readw(s) & 0xff;
1329}
1330
1331static void copyout(void __iomem *dest, const void *src, int c)
1332{
1333    u_short __iomem *d = dest;
1334    const u_short *s = src;
1335    int odd;
1336
1337    if (c <= 0)
1338        return;
1339    odd = (c & 1); c >>= 1;
1340
1341    if (c) {
1342        do { __raw_writew(*s++, d++); } while (--c);
1343    }
1344    /* copy last byte doing a read-modify-write */
1345    if (odd)
1346        writew((readw(d) & 0xff00) | *(u_char *)s, d);
1347}
1348
1349/*====================================================================*/
1350
1351static void shmem_get_8390_hdr(struct net_device *dev,
1352                               struct e8390_pkt_hdr *hdr,
1353                               int ring_page)
1354{
1355    void __iomem *xfer_start = ei_status.mem + (TX_PAGES<<8)
1356                                + (ring_page << 8)
1357                                - (ei_status.rx_start_page << 8);
1358
1359    copyin(hdr, xfer_start, sizeof(struct e8390_pkt_hdr));
1360    /* Fix for big endian systems */
1361    hdr->count = le16_to_cpu(hdr->count);
1362}
1363
1364/*====================================================================*/
1365
1366static void shmem_block_input(struct net_device *dev, int count,
1367                              struct sk_buff *skb, int ring_offset)
1368{
1369    void __iomem *base = ei_status.mem;
1370    unsigned long offset = (TX_PAGES<<8) + ring_offset
1371                                - (ei_status.rx_start_page << 8);
1372    char *buf = skb->data;
1373
1374    if (offset + count > ei_status.priv) {
1375        /* We must wrap the input move. */
1376        int semi_count = ei_status.priv - offset;
1377        copyin(buf, base + offset, semi_count);
1378        buf += semi_count;
1379        offset = TX_PAGES<<8;
1380        count -= semi_count;
1381    }
1382    copyin(buf, base + offset, count);
1383}
1384
1385/*====================================================================*/
1386
1387static void shmem_block_output(struct net_device *dev, int count,
1388                               const u_char *buf, const int start_page)
1389{
1390    void __iomem *shmem = ei_status.mem + (start_page << 8);
1391    shmem -= ei_status.tx_start_page << 8;
1392    copyout(shmem, buf, count);
1393}
1394
1395/*====================================================================*/
1396
1397static int setup_shmem_window(struct pcmcia_device *link, int start_pg,
1398                              int stop_pg, int cm_offset)
1399{
1400    struct net_device *dev = link->priv;
1401    pcnet_dev_t *info = PRIV(dev);
1402    int i, window_size, offset, ret;
1403
1404    window_size = (stop_pg - start_pg) << 8;
1405    if (window_size > 32 * 1024)
1406        window_size = 32 * 1024;
1407
1408    /* Make sure it's a power of two.  */
1409    window_size = roundup_pow_of_two(window_size);
1410
1411    /* Allocate a memory window */
1412    link->resource[3]->flags |= WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM|WIN_ENABLE;
1413    link->resource[3]->flags |= WIN_USE_WAIT;
1414    link->resource[3]->start = 0; link->resource[3]->end = window_size;
1415    ret = pcmcia_request_window(link, link->resource[3], mem_speed);
1416    if (ret)
1417            goto failed;
1418
1419    offset = (start_pg << 8) + cm_offset;
1420    offset -= offset % window_size;
1421    ret = pcmcia_map_mem_page(link, link->resource[3], offset);
1422    if (ret)
1423            goto failed;
1424
1425    /* Try scribbling on the buffer */
1426    info->base = ioremap(link->resource[3]->start,
1427                        resource_size(link->resource[3]));
1428    for (i = 0; i < (TX_PAGES<<8); i += 2)
1429        __raw_writew((i>>1), info->base+offset+i);
1430    udelay(100);
1431    for (i = 0; i < (TX_PAGES<<8); i += 2)
1432        if (__raw_readw(info->base+offset+i) != (i>>1)) break;
1433    pcnet_reset_8390(dev);
1434    if (i != (TX_PAGES<<8)) {
1435        iounmap(info->base);
1436        pcmcia_release_window(link, link->resource[3]);
1437        info->base = NULL;
1438        goto failed;
1439    }
1440
1441    ei_status.mem = info->base + offset;
1442    ei_status.priv = resource_size(link->resource[3]);
1443    dev->mem_start = (u_long)ei_status.mem;
1444    dev->mem_end = dev->mem_start + resource_size(link->resource[3]);
1445
1446    ei_status.tx_start_page = start_pg;
1447    ei_status.rx_start_page = start_pg + TX_PAGES;
1448    ei_status.stop_page = start_pg + (
1449            (resource_size(link->resource[3]) - offset) >> 8);
1450
1451    /* set up block i/o functions */
1452    ei_status.get_8390_hdr = shmem_get_8390_hdr;
1453    ei_status.block_input = shmem_block_input;
1454    ei_status.block_output = shmem_block_output;
1455
1456    info->flags |= USE_SHMEM;
1457    return 0;
1458
1459failed:
1460    return 1;
1461}
1462
1463/*====================================================================*/
1464
1465static const struct pcmcia_device_id pcnet_ids[] = {
1466        PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0057, 0x0021),
1467        PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0104, 0x000a),
1468        PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0105, 0xea15),
1469        PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0143, 0x3341),
1470        PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0143, 0xc0ab),
1471        PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x021b, 0x0101),
1472        PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x08a1, 0xc0ab),
1473        PCMCIA_PFC_DEVICE_PROD_ID12(0, "AnyCom", "Fast Ethernet + 56K COMBO", 0x578ba6e7, 0xb0ac62c4),
1474        PCMCIA_PFC_DEVICE_PROD_ID12(0, "ATKK", "LM33-PCM-T", 0xba9eb7e2, 0x077c174e),
1475        PCMCIA_PFC_DEVICE_PROD_ID12(0, "D-Link", "DME336T", 0x1a424a1c, 0xb23897ff),
1476        PCMCIA_PFC_DEVICE_PROD_ID12(0, "Grey Cell", "GCS3000", 0x2a151fac, 0x48b932ae),
1477        PCMCIA_PFC_DEVICE_PROD_ID12(0, "Linksys", "EtherFast 10&100 + 56K PC Card (PCMLM56)", 0x0733cc81, 0xb3765033),
1478        PCMCIA_PFC_DEVICE_PROD_ID12(0, "LINKSYS", "PCMLM336", 0xf7cb0b07, 0x7a821b58),
1479        PCMCIA_PFC_DEVICE_PROD_ID12(0, "MICRO RESEARCH", "COMBO-L/M-336", 0xb2ced065, 0x3ced0555),
1480        PCMCIA_PFC_DEVICE_PROD_ID12(0, "PCMCIAs", "ComboCard", 0xdcfe12d3, 0xcd8906cc),
1481        PCMCIA_PFC_DEVICE_PROD_ID12(0, "PCMCIAs", "LanModem", 0xdcfe12d3, 0xc67c648f),
1482        PCMCIA_MFC_DEVICE_PROD_ID12(0, "IBM", "Home and Away 28.8 PC Card       ", 0xb569a6e5, 0x5bd4ff2c),
1483        PCMCIA_MFC_DEVICE_PROD_ID12(0, "IBM", "Home and Away Credit Card Adapter", 0xb569a6e5, 0x4bdf15c3),
1484        PCMCIA_MFC_DEVICE_PROD_ID12(0, "IBM", "w95 Home and Away Credit Card ", 0xb569a6e5, 0xae911c15),
1485        PCMCIA_MFC_DEVICE_PROD_ID123(0, "APEX DATA", "MULTICARD", "ETHERNET-MODEM", 0x11c2da09, 0x7289dc5d, 0xaad95e1f),
1486        PCMCIA_MFC_DEVICE_PROD_ID2(0, "FAX/Modem/Ethernet Combo Card ", 0x1ed59302),
1487        PCMCIA_DEVICE_MANF_CARD(0x0057, 0x1004),
1488        PCMCIA_DEVICE_MANF_CARD(0x0104, 0x000d),
1489        PCMCIA_DEVICE_MANF_CARD(0x0104, 0x0075),
1490        PCMCIA_DEVICE_MANF_CARD(0x0104, 0x0145),
1491        PCMCIA_DEVICE_MANF_CARD(0x0149, 0x0230),
1492        PCMCIA_DEVICE_MANF_CARD(0x0149, 0x4530),
1493        PCMCIA_DEVICE_MANF_CARD(0x0149, 0xc1ab),
1494        PCMCIA_DEVICE_MANF_CARD(0x0186, 0x0110),
1495        PCMCIA_DEVICE_MANF_CARD(0x01bf, 0x8041),
1496        PCMCIA_DEVICE_MANF_CARD(0x0213, 0x2452),
1497        PCMCIA_DEVICE_MANF_CARD(0x026f, 0x0300),
1498        PCMCIA_DEVICE_MANF_CARD(0x026f, 0x0307),
1499        PCMCIA_DEVICE_MANF_CARD(0x026f, 0x030a),
1500        PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1103),
1501        PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1121),
1502        PCMCIA_DEVICE_PROD_ID12("2408LAN", "Ethernet", 0x352fff7f, 0x00b2e941),
1503        PCMCIA_DEVICE_PROD_ID1234("Socket", "CF 10/100 Ethernet Card", "Revision B", "05/11/06", 0xb38bcc2e, 0x4de88352, 0xeaca6c8d, 0x7e57c22e),
1504        PCMCIA_DEVICE_PROD_ID123("Cardwell", "PCMCIA", "ETHERNET", 0x9533672e, 0x281f1c5d, 0x3ff7175b),
1505        PCMCIA_DEVICE_PROD_ID123("CNet  ", "CN30BC", "ETHERNET", 0x9fe55d3d, 0x85601198, 0x3ff7175b),
1506        PCMCIA_DEVICE_PROD_ID123("Digital", "Ethernet", "Adapter", 0x9999ab35, 0x00b2e941, 0x4b0d829e),
1507        PCMCIA_DEVICE_PROD_ID123("Edimax Technology Inc.", "PCMCIA", "Ethernet Card", 0x738a0019, 0x281f1c5d, 0x5e9d92c0),
1508        PCMCIA_DEVICE_PROD_ID123("EFA   ", "EFA207", "ETHERNET", 0x3d294be4, 0xeb9aab6c, 0x3ff7175b),
1509        PCMCIA_DEVICE_PROD_ID123("I-O DATA", "PCLA", "ETHERNET", 0x1d55d7ec, 0xe4c64d34, 0x3ff7175b),
1510        PCMCIA_DEVICE_PROD_ID123("IO DATA", "PCLATE", "ETHERNET", 0x547e66dc, 0x6b260753, 0x3ff7175b),
1511        PCMCIA_DEVICE_PROD_ID123("KingMax Technology Inc.", "EN10-T2", "PCMCIA Ethernet Card", 0x932b7189, 0x699e4436, 0x6f6652e0),
1512        PCMCIA_DEVICE_PROD_ID123("PCMCIA", "PCMCIA-ETHERNET-CARD", "UE2216", 0x281f1c5d, 0xd4cd2f20, 0xb87add82),
1513        PCMCIA_DEVICE_PROD_ID123("PCMCIA", "PCMCIA-ETHERNET-CARD", "UE2620", 0x281f1c5d, 0xd4cd2f20, 0x7d3d83a8),
1514        PCMCIA_DEVICE_PROD_ID1("2412LAN", 0x67f236ab),
1515        PCMCIA_DEVICE_PROD_ID12("ACCTON", "EN2212", 0xdfc6b5b2, 0xcb112a11),
1516        PCMCIA_DEVICE_PROD_ID12("ACCTON", "EN2216-PCMCIA-ETHERNET", 0xdfc6b5b2, 0x5542bfff),
1517        PCMCIA_DEVICE_PROD_ID12("Allied Telesis, K.K.", "CentreCOM LA100-PCM-T V2 100/10M LAN PC Card", 0xbb7fbdd7, 0xcd91cc68),
1518        PCMCIA_DEVICE_PROD_ID12("Allied Telesis K.K.", "LA100-PCM V2", 0x36634a66, 0xc6d05997),
1519        PCMCIA_DEVICE_PROD_ID12("Allied Telesis, K.K.", "CentreCOM LA-PCM_V2", 0xbb7fBdd7, 0x28e299f8),
1520        PCMCIA_DEVICE_PROD_ID12("Allied Telesis K.K.", "LA-PCM V3", 0x36634a66, 0x62241d96),
1521        PCMCIA_DEVICE_PROD_ID12("AmbiCom", "AMB8010", 0x5070a7f9, 0x82f96e96),
1522        PCMCIA_DEVICE_PROD_ID12("AmbiCom", "AMB8610", 0x5070a7f9, 0x86741224),
1523        PCMCIA_DEVICE_PROD_ID12("AmbiCom Inc", "AMB8002", 0x93b15570, 0x75ec3efb),
1524        PCMCIA_DEVICE_PROD_ID12("AmbiCom Inc", "AMB8002T", 0x93b15570, 0x461c5247),
1525        PCMCIA_DEVICE_PROD_ID12("AmbiCom Inc", "AMB8010", 0x93b15570, 0x82f96e96),
1526        PCMCIA_DEVICE_PROD_ID12("AnyCom", "ECO Ethernet", 0x578ba6e7, 0x0a9888c1),
1527        PCMCIA_DEVICE_PROD_ID12("AnyCom", "ECO Ethernet 10/100", 0x578ba6e7, 0x939fedbd),
1528        PCMCIA_DEVICE_PROD_ID12("AROWANA", "PCMCIA Ethernet LAN Card", 0x313adbc8, 0x08d9f190),
1529        PCMCIA_DEVICE_PROD_ID12("ASANTE", "FriendlyNet PC Card", 0x3a7ade0f, 0x41c64504),
1530        PCMCIA_DEVICE_PROD_ID12("Billionton", "LNT-10TB", 0x552ab682, 0xeeb1ba6a),
1531        PCMCIA_DEVICE_PROD_ID12("CF", "10Base-Ethernet", 0x44ebf863, 0x93ae4d79),
1532        PCMCIA_DEVICE_PROD_ID12("CNet", "CN40BC Ethernet", 0xbc477dde, 0xfba775a7),
1533        PCMCIA_DEVICE_PROD_ID12("COMPU-SHACK", "BASEline PCMCIA 10 MBit Ethernetadapter", 0xfa2e424d, 0xe9190d8a),
1534        PCMCIA_DEVICE_PROD_ID12("COMPU-SHACK", "FASTline PCMCIA 10/100 Fast-Ethernet", 0xfa2e424d, 0x3953d9b9),
1535        PCMCIA_DEVICE_PROD_ID12("CONTEC", "C-NET(PC)C-10L", 0x21cab552, 0xf6f90722),
1536        PCMCIA_DEVICE_PROD_ID12("corega", "FEther PCC-TXF", 0x0a21501a, 0xa51564a2),
1537        PCMCIA_DEVICE_PROD_ID12("corega", "Ether CF-TD", 0x0a21501a, 0x6589340a),
1538        PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega Ether CF-TD LAN Card", 0x5261440f, 0x8797663b),
1539        PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega EtherII PCC-T", 0x5261440f, 0xfa9d85bd),
1540        PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega EtherII PCC-TD", 0x5261440f, 0xc49bd73d),
1541        PCMCIA_DEVICE_PROD_ID12("Corega K.K.", "corega EtherII PCC-TD", 0xd4fdcbd8, 0xc49bd73d),
1542        PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega Ether PCC-T", 0x5261440f, 0x6705fcaa),
1543        PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega Ether PCC-TD", 0x5261440f, 0x47d5ca83),
1544        PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega FastEther PCC-TX", 0x5261440f, 0x485e85d9),
1545        PCMCIA_DEVICE_PROD_ID12("Corega,K.K.", "Ethernet LAN Card", 0x110d26d9, 0x9fd2f0a2),
1546        PCMCIA_DEVICE_PROD_ID12("corega,K.K.", "Ethernet LAN Card", 0x9791a90e, 0x9fd2f0a2),
1547        PCMCIA_DEVICE_PROD_ID12("corega K.K.", "(CG-LAPCCTXD)", 0x5261440f, 0x73ec0d88),
1548        PCMCIA_DEVICE_PROD_ID12("CouplerlessPCMCIA", "100BASE", 0xee5af0ad, 0x7c2add04),
1549        PCMCIA_DEVICE_PROD_ID12("CyQ've", "ELA-010", 0x77008979, 0x9d8d445d),
1550        PCMCIA_DEVICE_PROD_ID12("CyQ've", "ELA-110E 10/100M LAN Card", 0x77008979, 0xfd184814),
1551        PCMCIA_DEVICE_PROD_ID12("DataTrek.", "NetCard ", 0x5cd66d9d, 0x84697ce0),
1552        PCMCIA_DEVICE_PROD_ID12("Dayna Communications, Inc.", "CommuniCard E", 0x0c629325, 0xb4e7dbaf),
1553        PCMCIA_DEVICE_PROD_ID12("Digicom", "Palladio LAN 10/100", 0x697403d8, 0xe160b995),
1554        PCMCIA_DEVICE_PROD_ID12("Digicom", "Palladio LAN 10/100 Dongless", 0x697403d8, 0xa6d3b233),
1555        PCMCIA_DEVICE_PROD_ID12("DIGITAL", "DEPCM-XX", 0x69616cb3, 0xe600e76e),
1556        PCMCIA_DEVICE_PROD_ID12("D-Link", "DE-650", 0x1a424a1c, 0xf28c8398),
1557        PCMCIA_DEVICE_PROD_ID12("D-Link", "DE-660", 0x1a424a1c, 0xd9a1d05b),
1558        PCMCIA_DEVICE_PROD_ID12("D-Link", "DE-660+", 0x1a424a1c, 0x50dcd0ec),
1559        PCMCIA_DEVICE_PROD_ID12("D-Link", "DFE-650", 0x1a424a1c, 0x0f0073f9),
1560        PCMCIA_DEVICE_PROD_ID12("Dual Speed", "10/100 PC Card", 0x725b842d, 0xf1efee84),
1561        PCMCIA_DEVICE_PROD_ID12("Dual Speed", "10/100 Port Attached PC Card", 0x725b842d, 0x2db1f8e9),
1562        PCMCIA_DEVICE_PROD_ID12("Dynalink", "L10BC", 0x55632fd5, 0xdc65f2b1),
1563        PCMCIA_DEVICE_PROD_ID12("DYNALINK", "L10BC", 0x6a26d1cf, 0xdc65f2b1),
1564        PCMCIA_DEVICE_PROD_ID12("DYNALINK", "L10C", 0x6a26d1cf, 0xc4f84efb),
1565        PCMCIA_DEVICE_PROD_ID12("E-CARD", "E-CARD", 0x6701da11, 0x6701da11),
1566        PCMCIA_DEVICE_PROD_ID12("EIGER Labs Inc.", "Ethernet 10BaseT card", 0x53c864c6, 0xedd059f6),
1567        PCMCIA_DEVICE_PROD_ID12("EIGER Labs Inc.", "Ethernet Combo card", 0x53c864c6, 0x929c486c),
1568        PCMCIA_DEVICE_PROD_ID12("Ethernet", "Adapter", 0x00b2e941, 0x4b0d829e),
1569        PCMCIA_DEVICE_PROD_ID12("Ethernet Adapter", "E2000 PCMCIA Ethernet", 0x96767301, 0x71fbbc61),
1570        PCMCIA_DEVICE_PROD_ID12("Ethernet PCMCIA adapter", "EP-210", 0x8dd86181, 0xf2b52517),
1571        PCMCIA_DEVICE_PROD_ID12("Fast Ethernet", "Adapter", 0xb4be14e3, 0x4b0d829e),
1572        PCMCIA_DEVICE_PROD_ID12("Grey Cell", "GCS2000", 0x2a151fac, 0xf00555cb),
1573        PCMCIA_DEVICE_PROD_ID12("Grey Cell", "GCS2220", 0x2a151fac, 0xc1b7e327),
1574        PCMCIA_DEVICE_PROD_ID12("GVC", "NIC-2000p", 0x76e171bd, 0x6eb1c947),
1575        PCMCIA_DEVICE_PROD_ID12("IBM Corp.", "Ethernet", 0xe3736c88, 0x00b2e941),
1576        PCMCIA_DEVICE_PROD_ID12("IC-CARD", "IC-CARD", 0x60cb09a6, 0x60cb09a6),
1577        PCMCIA_DEVICE_PROD_ID12("IC-CARD+", "IC-CARD+", 0x93693494, 0x93693494),
1578        PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCETTX", 0x547e66dc, 0x6fc5459b),
1579        PCMCIA_DEVICE_PROD_ID12("iPort", "10/100 Ethernet Card", 0x56c538d2, 0x11b0ffc0),
1580        PCMCIA_DEVICE_PROD_ID12("KANSAI ELECTRIC CO.,LTD", "KLA-PCM/T", 0xb18dc3b4, 0xcc51a956),
1581        PCMCIA_DEVICE_PROD_ID12("KENTRONICS", "KEP-230", 0xaf8144c9, 0x868f6616),
1582        PCMCIA_DEVICE_PROD_ID12("KCI", "PE520 PCMCIA Ethernet Adapter", 0xa89b87d3, 0x1eb88e64),
1583        PCMCIA_DEVICE_PROD_ID12("KINGMAX", "EN10T2T", 0x7bcb459a, 0xa5c81fa5),
1584        PCMCIA_DEVICE_PROD_ID12("Kingston", "KNE-PC2", 0x1128e633, 0xce2a89b3),
1585        PCMCIA_DEVICE_PROD_ID12("Kingston Technology Corp.", "EtheRx PC Card Ethernet Adapter", 0x313c7be3, 0x0afb54a2),
1586        PCMCIA_DEVICE_PROD_ID12("Laneed", "LD-10/100CD", 0x1b7827b2, 0xcda71d1c),
1587        PCMCIA_DEVICE_PROD_ID12("Laneed", "LD-CDF", 0x1b7827b2, 0xfec71e40),
1588        PCMCIA_DEVICE_PROD_ID12("Laneed", "LD-CDL/T", 0x1b7827b2, 0x79fba4f7),
1589        PCMCIA_DEVICE_PROD_ID12("Laneed", "LD-CDS", 0x1b7827b2, 0x931afaab),
1590        PCMCIA_DEVICE_PROD_ID12("LEMEL", "LM-N89TX PRO", 0xbbefb52f, 0xd2897a97),
1591        PCMCIA_DEVICE_PROD_ID12("Linksys", "Combo PCMCIA EthernetCard (EC2T)", 0x0733cc81, 0x32ee8c78),
1592        PCMCIA_DEVICE_PROD_ID12("LINKSYS", "E-CARD", 0xf7cb0b07, 0x6701da11),
1593        PCMCIA_DEVICE_PROD_ID12("Linksys", "EtherFast 10/100 Integrated PC Card (PCM100)", 0x0733cc81, 0x453c3f9d),
1594        PCMCIA_DEVICE_PROD_ID12("Linksys", "EtherFast 10/100 PC Card (PCMPC100)", 0x0733cc81, 0x66c5a389),
1595        PCMCIA_DEVICE_PROD_ID12("Linksys", "EtherFast 10/100 PC Card (PCMPC100 V2)", 0x0733cc81, 0x3a3b28e9),
1596        PCMCIA_DEVICE_PROD_ID12("Linksys", "HomeLink Phoneline + 10/100 Network PC Card (PCM100H1)", 0x733cc81, 0x7a3e5c3a),
1597        PCMCIA_DEVICE_PROD_ID12("Logitec", "LPM-LN100TX", 0x88fcdeda, 0x6d772737),
1598        PCMCIA_DEVICE_PROD_ID12("Logitec", "LPM-LN100TE", 0x88fcdeda, 0x0e714bee),
1599        PCMCIA_DEVICE_PROD_ID12("Logitec", "LPM-LN20T", 0x88fcdeda, 0x81090922),
1600        PCMCIA_DEVICE_PROD_ID12("Logitec", "LPM-LN10TE", 0x88fcdeda, 0xc1e2521c),
1601        PCMCIA_DEVICE_PROD_ID12("LONGSHINE", "PCMCIA Ethernet Card", 0xf866b0b0, 0x6f6652e0),
1602        PCMCIA_DEVICE_PROD_ID12("MACNICA", "ME1-JEIDA", 0x20841b68, 0xaf8a3578),
1603        PCMCIA_DEVICE_PROD_ID12("Macsense", "MPC-10", 0xd830297f, 0xd265c307),
1604        PCMCIA_DEVICE_PROD_ID12("Matsushita Electric Industrial Co.,LTD.", "CF-VEL211", 0x44445376, 0x8ded41d4),
1605        PCMCIA_DEVICE_PROD_ID12("MAXTECH", "PCN2000", 0x78d64bc0, 0xca0ca4b8),
1606        PCMCIA_DEVICE_PROD_ID12("MELCO", "LPC2-T", 0x481e0094, 0xa2eb0cf3),
1607        PCMCIA_DEVICE_PROD_ID12("MELCO", "LPC2-TX", 0x481e0094, 0x41a6916c),
1608        PCMCIA_DEVICE_PROD_ID12("Microcom C.E.", "Travel Card LAN 10/100", 0x4b91cec7, 0xe70220d6),
1609        PCMCIA_DEVICE_PROD_ID12("Microdyne", "NE4200", 0x2e6da59b, 0x0478e472),
1610        PCMCIA_DEVICE_PROD_ID12("MIDORI ELEC.", "LT-PCMT", 0x648d55c1, 0xbde526c7),
1611        PCMCIA_DEVICE_PROD_ID12("National Semiconductor", "InfoMover 4100", 0x36e1191f, 0x60c229b9),
1612        PCMCIA_DEVICE_PROD_ID12("National Semiconductor", "InfoMover NE4100", 0x36e1191f, 0xa6617ec8),
1613        PCMCIA_DEVICE_PROD_ID12("NEC", "PC-9801N-J12", 0x18df0ba0, 0xbc912d76),
1614        PCMCIA_DEVICE_PROD_ID12("NETGEAR", "FA410TX", 0x9aa79dc3, 0x60e5bc0e),
1615        PCMCIA_DEVICE_PROD_ID12("Network Everywhere", "Fast Ethernet 10/100 PC Card", 0x820a67b6, 0x31ed1a5f),
1616        PCMCIA_DEVICE_PROD_ID12("NextCom K.K.", "Next Hawk", 0xaedaec74, 0xad050ef1),
1617        PCMCIA_DEVICE_PROD_ID12("PCMCIA", "10/100Mbps Ethernet Card", 0x281f1c5d, 0x6e41773b),
1618        PCMCIA_DEVICE_PROD_ID12("PCMCIA", "Ethernet", 0x281f1c5d, 0x00b2e941),
1619        PCMCIA_DEVICE_PROD_ID12("PCMCIA", "ETHERNET", 0x281f1c5d, 0x3ff7175b),
1620        PCMCIA_DEVICE_PROD_ID12("PCMCIA", "Ethernet 10BaseT Card", 0x281f1c5d, 0x4de2f6c8),
1621        PCMCIA_DEVICE_PROD_ID12("PCMCIA", "Ethernet Card", 0x281f1c5d, 0x5e9d92c0),
1622        PCMCIA_DEVICE_PROD_ID12("PCMCIA", "Ethernet Combo card", 0x281f1c5d, 0x929c486c),
1623        PCMCIA_DEVICE_PROD_ID12("PCMCIA", "ETHERNET V1.0", 0x281f1c5d, 0x4d8817c8),
1624        PCMCIA_DEVICE_PROD_ID12("PCMCIA", "FastEthernet", 0x281f1c5d, 0xfe871eeb),
1625        PCMCIA_DEVICE_PROD_ID12("PCMCIA", "Fast-Ethernet", 0x281f1c5d, 0x45f1f3b4),
1626        PCMCIA_DEVICE_PROD_ID12("PCMCIA", "FAST ETHERNET CARD", 0x281f1c5d, 0xec5dbca7),
1627        PCMCIA_DEVICE_PROD_ID12("PCMCIA LAN", "Ethernet", 0x7500e246, 0x00b2e941),
1628        PCMCIA_DEVICE_PROD_ID12("PCMCIA", "LNT-10TN", 0x281f1c5d, 0xe707f641),
1629        PCMCIA_DEVICE_PROD_ID12("PCMCIAs", "ComboCard", 0xdcfe12d3, 0xcd8906cc),
1630        PCMCIA_DEVICE_PROD_ID12("PCMCIA", "UE2212", 0x281f1c5d, 0xbf17199b),
1631        PCMCIA_DEVICE_PROD_ID12("PCMCIA", "    Ethernet NE2000 Compatible", 0x281f1c5d, 0x42d5d7e1),
1632        PCMCIA_DEVICE_PROD_ID12("PRETEC", "Ethernet CompactLAN 10baseT 3.3V", 0xebf91155, 0x30074c80),
1633        PCMCIA_DEVICE_PROD_ID12("PRETEC", "Ethernet CompactLAN 10BaseT 3.3V", 0xebf91155, 0x7f5a4f50),
1634        PCMCIA_DEVICE_PROD_ID12("Psion Dacom", "Gold Card Ethernet", 0xf5f025c2, 0x3a30e110),
1635        PCMCIA_DEVICE_PROD_ID12("=RELIA==", "Ethernet", 0xcdd0644a, 0x00b2e941),
1636        PCMCIA_DEVICE_PROD_ID12("RIOS Systems Co.", "PC CARD3 ETHERNET", 0x7dd33481, 0x10b41826),
1637        PCMCIA_DEVICE_PROD_ID12("RP", "1625B Ethernet NE2000 Compatible", 0xe3e66e22, 0xb96150df),
1638        PCMCIA_DEVICE_PROD_ID12("RPTI", "EP400 Ethernet NE2000 Compatible", 0xdc6f88fd, 0x4a7e2ae0),
1639        PCMCIA_DEVICE_PROD_ID12("RPTI", "EP401 Ethernet NE2000 Compatible", 0xdc6f88fd, 0x4bcbd7fd),
1640        PCMCIA_DEVICE_PROD_ID12("RPTI LTD.", "EP400", 0xc53ac515, 0x81e39388),
1641        PCMCIA_DEVICE_PROD_ID12("SCM", "Ethernet Combo card", 0xbdc3b102, 0x929c486c),
1642        PCMCIA_DEVICE_PROD_ID12("Seiko Epson Corp.", "Ethernet", 0x09928730, 0x00b2e941),
1643        PCMCIA_DEVICE_PROD_ID12("SMC", "EZCard-10-PCMCIA", 0xc4f8b18b, 0xfb21d265),
1644        PCMCIA_DEVICE_PROD_ID12("Socket Communications Inc", "Socket EA PCMCIA LAN Adapter Revision D", 0xc70a4760, 0x2ade483e),
1645        PCMCIA_DEVICE_PROD_ID12("Socket Communications Inc", "Socket EA PCMCIA LAN Adapter Revision E", 0xc70a4760, 0x5dd978a8),
1646        PCMCIA_DEVICE_PROD_ID12("TDK", "LAK-CD031 for PCMCIA", 0x1eae9475, 0x0ed386fa),
1647        PCMCIA_DEVICE_PROD_ID12("Telecom Device K.K.", "SuperSocket RE450T", 0x466b05f0, 0x8b74bc4f),
1648        PCMCIA_DEVICE_PROD_ID12("Telecom Device K.K.", "SuperSocket RE550T", 0x466b05f0, 0x33c8db2a),
1649        PCMCIA_DEVICE_PROD_ID13("Hypertec",  "EP401", 0x8787bec7, 0xf6e4a31e),
1650        PCMCIA_DEVICE_PROD_ID13("KingMax Technology Inc.", "Ethernet Card", 0x932b7189, 0x5e9d92c0),
1651        PCMCIA_DEVICE_PROD_ID13("LONGSHINE", "EP401", 0xf866b0b0, 0xf6e4a31e),
1652        PCMCIA_DEVICE_PROD_ID13("Xircom", "CFE-10", 0x2e3ee845, 0x22a49f89),
1653        PCMCIA_DEVICE_PROD_ID1("CyQ've 10 Base-T LAN CARD", 0x94faf360),
1654        PCMCIA_DEVICE_PROD_ID1("EP-210 PCMCIA LAN CARD.", 0x8850b4de),
1655        PCMCIA_DEVICE_PROD_ID1("ETHER-C16", 0x06a8514f),
1656        PCMCIA_DEVICE_PROD_ID1("NE2000 Compatible", 0x75b8ad5a),
1657        PCMCIA_DEVICE_PROD_ID2("EN-6200P2", 0xa996d078),
1658        /* too generic! */
1659        /* PCMCIA_DEVICE_PROD_ID12("PCMCIA", "10/100 Ethernet Card", 0x281f1c5d, 0x11b0ffc0), */
1660        PCMCIA_PFC_DEVICE_CIS_PROD_ID12(0, "PCMCIA", "EN2218-LAN/MODEM", 0x281f1c5d, 0x570f348e, "cis/PCMLM28.cis"),
1661        PCMCIA_PFC_DEVICE_CIS_PROD_ID12(0, "PCMCIA", "UE2218-LAN/MODEM", 0x281f1c5d, 0x6fdcacee, "cis/PCMLM28.cis"),
1662        PCMCIA_PFC_DEVICE_CIS_PROD_ID12(0, "Psion Dacom", "Gold Card V34 Ethernet", 0xf5f025c2, 0x338e8155, "cis/PCMLM28.cis"),
1663        PCMCIA_PFC_DEVICE_CIS_PROD_ID12(0, "Psion Dacom", "Gold Card V34 Ethernet GSM", 0xf5f025c2, 0x4ae85d35, "cis/PCMLM28.cis"),
1664        PCMCIA_PFC_DEVICE_CIS_PROD_ID12(0, "LINKSYS", "PCMLM28", 0xf7cb0b07, 0x66881874, "cis/PCMLM28.cis"),
1665        PCMCIA_PFC_DEVICE_CIS_PROD_ID12(0, "TOSHIBA", "Modem/LAN Card", 0xb4585a1a, 0x53f922f8, "cis/PCMLM28.cis"),
1666        PCMCIA_MFC_DEVICE_CIS_PROD_ID12(0, "DAYNA COMMUNICATIONS", "LAN AND MODEM MULTIFUNCTION", 0x8fdf8f89, 0xdd5ed9e8, "cis/DP83903.cis"),
1667        PCMCIA_MFC_DEVICE_CIS_PROD_ID4(0, "NSC MF LAN/Modem", 0x58fc6056, "cis/DP83903.cis"),
1668        PCMCIA_MFC_DEVICE_CIS_MANF_CARD(0, 0x0175, 0x0000, "cis/DP83903.cis"),
1669        PCMCIA_DEVICE_CIS_PROD_ID12("Allied Telesis,K.K", "Ethernet LAN Card", 0x2ad62f3c, 0x9fd2f0a2, "cis/LA-PCM.cis"),
1670        PCMCIA_DEVICE_CIS_PROD_ID12("KTI", "PE520 PLUS", 0xad180345, 0x9d58d392, "cis/PE520.cis"),
1671        PCMCIA_DEVICE_CIS_PROD_ID12("NDC", "Ethernet", 0x01c43ae1, 0x00b2e941, "cis/NE2K.cis"),
1672        PCMCIA_DEVICE_CIS_PROD_ID12("PMX   ", "PE-200", 0x34f3f1c8, 0x10b59f8c, "cis/PE-200.cis"),
1673        PCMCIA_DEVICE_CIS_PROD_ID12("TAMARACK", "Ethernet", 0xcf434fba, 0x00b2e941, "cis/tamarack.cis"),
1674        PCMCIA_DEVICE_PROD_ID12("Ethernet", "CF Size PC Card", 0x00b2e941, 0x43ac239b),
1675        PCMCIA_DEVICE_PROD_ID123("Fast Ethernet", "CF Size PC Card", "1.0",
1676                0xb4be14e3, 0x43ac239b, 0x0877b627),
1677        PCMCIA_DEVICE_NULL
1678};
1679MODULE_DEVICE_TABLE(pcmcia, pcnet_ids);
1680MODULE_FIRMWARE("cis/PCMLM28.cis");
1681MODULE_FIRMWARE("cis/DP83903.cis");
1682MODULE_FIRMWARE("cis/LA-PCM.cis");
1683MODULE_FIRMWARE("cis/PE520.cis");
1684MODULE_FIRMWARE("cis/NE2K.cis");
1685MODULE_FIRMWARE("cis/PE-200.cis");
1686MODULE_FIRMWARE("cis/tamarack.cis");
1687
1688static struct pcmcia_driver pcnet_driver = {
1689        .name           = "pcnet_cs",
1690        .probe          = pcnet_probe,
1691        .remove         = pcnet_detach,
1692        .owner          = THIS_MODULE,
1693        .id_table       = pcnet_ids,
1694        .suspend        = pcnet_suspend,
1695        .resume         = pcnet_resume,
1696};
1697module_pcmcia_driver(pcnet_driver);
1698