linux/drivers/net/wireless/marvell/mwifiex/sdio.h
<<
>>
Prefs
   1/*
   2 * Marvell Wireless LAN device driver: SDIO specific definitions
   3 *
   4 * Copyright (C) 2011-2014, Marvell International Ltd.
   5 *
   6 * This software file (the "File") is distributed by Marvell International
   7 * Ltd. under the terms of the GNU General Public License Version 2, June 1991
   8 * (the "License").  You may use, redistribute and/or modify this File in
   9 * accordance with the terms and conditions of the License, a copy of which
  10 * is available by writing to the Free Software Foundation, Inc.,
  11 * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the
  12 * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
  13 *
  14 * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
  15 * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
  16 * ARE EXPRESSLY DISCLAIMED.  The License provides additional details about
  17 * this warranty disclaimer.
  18 */
  19
  20#ifndef _MWIFIEX_SDIO_H
  21#define _MWIFIEX_SDIO_H
  22
  23
  24#include <linux/completion.h>
  25#include <linux/mmc/sdio.h>
  26#include <linux/mmc/sdio_ids.h>
  27#include <linux/mmc/sdio_func.h>
  28#include <linux/mmc/card.h>
  29#include <linux/mmc/host.h>
  30
  31#include "main.h"
  32
  33#define SD8786_DEFAULT_FW_NAME "mrvl/sd8786_uapsta.bin"
  34#define SD8787_DEFAULT_FW_NAME "mrvl/sd8787_uapsta.bin"
  35#define SD8797_DEFAULT_FW_NAME "mrvl/sd8797_uapsta.bin"
  36#define SD8897_DEFAULT_FW_NAME "mrvl/sd8897_uapsta.bin"
  37#define SD8887_DEFAULT_FW_NAME "mrvl/sd8887_uapsta.bin"
  38#define SD8801_DEFAULT_FW_NAME "mrvl/sd8801_uapsta.bin"
  39#define SD8997_DEFAULT_FW_NAME "mrvl/sd8997_uapsta.bin"
  40
  41#define BLOCK_MODE      1
  42#define BYTE_MODE       0
  43
  44#define REG_PORT                        0
  45
  46#define MWIFIEX_SDIO_IO_PORT_MASK               0xfffff
  47
  48#define MWIFIEX_SDIO_BYTE_MODE_MASK     0x80000000
  49
  50#define MWIFIEX_MAX_FUNC2_REG_NUM       13
  51#define MWIFIEX_SDIO_SCRATCH_SIZE       10
  52
  53#define SDIO_MPA_ADDR_BASE              0x1000
  54#define CTRL_PORT                       0
  55#define CTRL_PORT_MASK                  0x0001
  56
  57#define CMD_PORT_UPLD_INT_MASK          (0x1U<<6)
  58#define CMD_PORT_DNLD_INT_MASK          (0x1U<<7)
  59#define HOST_TERM_CMD53                 (0x1U << 2)
  60#define REG_PORT                        0
  61#define MEM_PORT                        0x10000
  62
  63#define CMD53_NEW_MODE                  (0x1U << 0)
  64#define CMD_PORT_RD_LEN_EN              (0x1U << 2)
  65#define CMD_PORT_AUTO_EN                (0x1U << 0)
  66#define CMD_PORT_SLCT                   0x8000
  67#define UP_LD_CMD_PORT_HOST_INT_STATUS  (0x40U)
  68#define DN_LD_CMD_PORT_HOST_INT_STATUS  (0x80U)
  69
  70#define MWIFIEX_MP_AGGR_BUF_SIZE_16K    (16384)
  71#define MWIFIEX_MP_AGGR_BUF_SIZE_32K    (32768)
  72/* we leave one block of 256 bytes for DMA alignment*/
  73#define MWIFIEX_MP_AGGR_BUF_SIZE_MAX    (65280)
  74
  75/* Misc. Config Register : Auto Re-enable interrupts */
  76#define AUTO_RE_ENABLE_INT              BIT(4)
  77
  78/* Host Control Registers : Configuration */
  79#define CONFIGURATION_REG               0x00
  80/* Host Control Registers : Host power up */
  81#define HOST_POWER_UP                   (0x1U << 1)
  82
  83/* Host Control Registers : Upload host interrupt mask */
  84#define UP_LD_HOST_INT_MASK             (0x1U)
  85/* Host Control Registers : Download host interrupt mask */
  86#define DN_LD_HOST_INT_MASK             (0x2U)
  87
  88/* Host Control Registers : Upload host interrupt status */
  89#define UP_LD_HOST_INT_STATUS           (0x1U)
  90/* Host Control Registers : Download host interrupt status */
  91#define DN_LD_HOST_INT_STATUS           (0x2U)
  92
  93/* Host Control Registers : Host interrupt status */
  94#define CARD_INT_STATUS_REG             0x28
  95
  96/* Card Control Registers : Card I/O ready */
  97#define CARD_IO_READY                   (0x1U << 3)
  98/* Card Control Registers : Download card ready */
  99#define DN_LD_CARD_RDY                  (0x1U << 0)
 100
 101/* Max retry number of CMD53 write */
 102#define MAX_WRITE_IOMEM_RETRY           2
 103
 104/* SDIO Tx aggregation in progress ? */
 105#define MP_TX_AGGR_IN_PROGRESS(a) (a->mpa_tx.pkt_cnt > 0)
 106
 107/* SDIO Tx aggregation buffer room for next packet ? */
 108#define MP_TX_AGGR_BUF_HAS_ROOM(a, len) ((a->mpa_tx.buf_len+len)        \
 109                                                <= a->mpa_tx.buf_size)
 110
 111/* Copy current packet (SDIO Tx aggregation buffer) to SDIO buffer */
 112#define MP_TX_AGGR_BUF_PUT(a, payload, pkt_len, port) do {              \
 113        memmove(&a->mpa_tx.buf[a->mpa_tx.buf_len],                      \
 114                        payload, pkt_len);                              \
 115        a->mpa_tx.buf_len += pkt_len;                                   \
 116        if (!a->mpa_tx.pkt_cnt)                                         \
 117                a->mpa_tx.start_port = port;                            \
 118        if (a->mpa_tx.start_port <= port)                               \
 119                a->mpa_tx.ports |= (1<<(a->mpa_tx.pkt_cnt));            \
 120        else                                                            \
 121                a->mpa_tx.ports |= (1<<(a->mpa_tx.pkt_cnt+1+            \
 122                                                (a->max_ports - \
 123                                                a->mp_end_port)));      \
 124        a->mpa_tx.pkt_cnt++;                                            \
 125} while (0)
 126
 127/* SDIO Tx aggregation limit ? */
 128#define MP_TX_AGGR_PKT_LIMIT_REACHED(a)                                 \
 129                        (a->mpa_tx.pkt_cnt == a->mpa_tx.pkt_aggr_limit)
 130
 131/* Reset SDIO Tx aggregation buffer parameters */
 132#define MP_TX_AGGR_BUF_RESET(a) do {                                    \
 133        a->mpa_tx.pkt_cnt = 0;                                          \
 134        a->mpa_tx.buf_len = 0;                                          \
 135        a->mpa_tx.ports = 0;                                            \
 136        a->mpa_tx.start_port = 0;                                       \
 137} while (0)
 138
 139/* SDIO Rx aggregation limit ? */
 140#define MP_RX_AGGR_PKT_LIMIT_REACHED(a)                                 \
 141                        (a->mpa_rx.pkt_cnt == a->mpa_rx.pkt_aggr_limit)
 142
 143/* SDIO Rx aggregation in progress ? */
 144#define MP_RX_AGGR_IN_PROGRESS(a) (a->mpa_rx.pkt_cnt > 0)
 145
 146/* SDIO Rx aggregation buffer room for next packet ? */
 147#define MP_RX_AGGR_BUF_HAS_ROOM(a, rx_len)                              \
 148                        ((a->mpa_rx.buf_len+rx_len) <= a->mpa_rx.buf_size)
 149
 150/* Reset SDIO Rx aggregation buffer parameters */
 151#define MP_RX_AGGR_BUF_RESET(a) do {                                    \
 152        a->mpa_rx.pkt_cnt = 0;                                          \
 153        a->mpa_rx.buf_len = 0;                                          \
 154        a->mpa_rx.ports = 0;                                            \
 155        a->mpa_rx.start_port = 0;                                       \
 156} while (0)
 157
 158/* data structure for SDIO MPA TX */
 159struct mwifiex_sdio_mpa_tx {
 160        /* multiport tx aggregation buffer pointer */
 161        u8 *buf;
 162        u32 buf_len;
 163        u32 pkt_cnt;
 164        u32 ports;
 165        u16 start_port;
 166        u8 enabled;
 167        u32 buf_size;
 168        u32 pkt_aggr_limit;
 169};
 170
 171struct mwifiex_sdio_mpa_rx {
 172        u8 *buf;
 173        u32 buf_len;
 174        u32 pkt_cnt;
 175        u32 ports;
 176        u16 start_port;
 177
 178        struct sk_buff **skb_arr;
 179        u32 *len_arr;
 180
 181        u8 enabled;
 182        u32 buf_size;
 183        u32 pkt_aggr_limit;
 184};
 185
 186int mwifiex_bus_register(void);
 187void mwifiex_bus_unregister(void);
 188
 189struct mwifiex_sdio_card_reg {
 190        u8 start_rd_port;
 191        u8 start_wr_port;
 192        u8 base_0_reg;
 193        u8 base_1_reg;
 194        u8 poll_reg;
 195        u8 host_int_enable;
 196        u8 host_int_rsr_reg;
 197        u8 host_int_status_reg;
 198        u8 host_int_mask_reg;
 199        u8 status_reg_0;
 200        u8 status_reg_1;
 201        u8 sdio_int_mask;
 202        u32 data_port_mask;
 203        u8 io_port_0_reg;
 204        u8 io_port_1_reg;
 205        u8 io_port_2_reg;
 206        u8 max_mp_regs;
 207        u8 rd_bitmap_l;
 208        u8 rd_bitmap_u;
 209        u8 rd_bitmap_1l;
 210        u8 rd_bitmap_1u;
 211        u8 wr_bitmap_l;
 212        u8 wr_bitmap_u;
 213        u8 wr_bitmap_1l;
 214        u8 wr_bitmap_1u;
 215        u8 rd_len_p0_l;
 216        u8 rd_len_p0_u;
 217        u8 card_misc_cfg_reg;
 218        u8 card_cfg_2_1_reg;
 219        u8 cmd_rd_len_0;
 220        u8 cmd_rd_len_1;
 221        u8 cmd_rd_len_2;
 222        u8 cmd_rd_len_3;
 223        u8 cmd_cfg_0;
 224        u8 cmd_cfg_1;
 225        u8 cmd_cfg_2;
 226        u8 cmd_cfg_3;
 227        u8 fw_dump_host_ready;
 228        u8 fw_dump_ctrl;
 229        u8 fw_dump_start;
 230        u8 fw_dump_end;
 231        u8 func1_dump_reg_start;
 232        u8 func1_dump_reg_end;
 233        u8 func1_scratch_reg;
 234        u8 func1_spec_reg_num;
 235        u8 func1_spec_reg_table[MWIFIEX_MAX_FUNC2_REG_NUM];
 236};
 237
 238struct sdio_mmc_card {
 239        struct sdio_func *func;
 240        struct mwifiex_adapter *adapter;
 241
 242        struct completion fw_done;
 243        const char *firmware;
 244        const struct mwifiex_sdio_card_reg *reg;
 245        u8 max_ports;
 246        u8 mp_agg_pkt_limit;
 247        u16 tx_buf_size;
 248        u32 mp_tx_agg_buf_size;
 249        u32 mp_rx_agg_buf_size;
 250
 251        u32 mp_rd_bitmap;
 252        u32 mp_wr_bitmap;
 253
 254        u16 mp_end_port;
 255        u32 mp_data_port_mask;
 256
 257        u8 curr_rd_port;
 258        u8 curr_wr_port;
 259
 260        u8 *mp_regs;
 261        bool supports_sdio_new_mode;
 262        bool has_control_mask;
 263        bool can_dump_fw;
 264        bool fw_dump_enh;
 265        bool can_auto_tdls;
 266        bool can_ext_scan;
 267
 268        struct mwifiex_sdio_mpa_tx mpa_tx;
 269        struct mwifiex_sdio_mpa_rx mpa_rx;
 270
 271        struct work_struct work;
 272        unsigned long work_flags;
 273};
 274
 275struct mwifiex_sdio_device {
 276        const char *firmware;
 277        const struct mwifiex_sdio_card_reg *reg;
 278        u8 max_ports;
 279        u8 mp_agg_pkt_limit;
 280        u16 tx_buf_size;
 281        u32 mp_tx_agg_buf_size;
 282        u32 mp_rx_agg_buf_size;
 283        bool supports_sdio_new_mode;
 284        bool has_control_mask;
 285        bool can_dump_fw;
 286        bool fw_dump_enh;
 287        bool can_auto_tdls;
 288        bool can_ext_scan;
 289};
 290
 291static const struct mwifiex_sdio_card_reg mwifiex_reg_sd87xx = {
 292        .start_rd_port = 1,
 293        .start_wr_port = 1,
 294        .base_0_reg = 0x0040,
 295        .base_1_reg = 0x0041,
 296        .poll_reg = 0x30,
 297        .host_int_enable = UP_LD_HOST_INT_MASK | DN_LD_HOST_INT_MASK,
 298        .host_int_rsr_reg = 0x1,
 299        .host_int_mask_reg = 0x02,
 300        .host_int_status_reg = 0x03,
 301        .status_reg_0 = 0x60,
 302        .status_reg_1 = 0x61,
 303        .sdio_int_mask = 0x3f,
 304        .data_port_mask = 0x0000fffe,
 305        .io_port_0_reg = 0x78,
 306        .io_port_1_reg = 0x79,
 307        .io_port_2_reg = 0x7A,
 308        .max_mp_regs = 64,
 309        .rd_bitmap_l = 0x04,
 310        .rd_bitmap_u = 0x05,
 311        .wr_bitmap_l = 0x06,
 312        .wr_bitmap_u = 0x07,
 313        .rd_len_p0_l = 0x08,
 314        .rd_len_p0_u = 0x09,
 315        .card_misc_cfg_reg = 0x6c,
 316        .func1_dump_reg_start = 0x0,
 317        .func1_dump_reg_end = 0x9,
 318        .func1_scratch_reg = 0x60,
 319        .func1_spec_reg_num = 5,
 320        .func1_spec_reg_table = {0x28, 0x30, 0x34, 0x38, 0x3c},
 321};
 322
 323static const struct mwifiex_sdio_card_reg mwifiex_reg_sd8897 = {
 324        .start_rd_port = 0,
 325        .start_wr_port = 0,
 326        .base_0_reg = 0x60,
 327        .base_1_reg = 0x61,
 328        .poll_reg = 0x50,
 329        .host_int_enable = UP_LD_HOST_INT_MASK | DN_LD_HOST_INT_MASK |
 330                        CMD_PORT_UPLD_INT_MASK | CMD_PORT_DNLD_INT_MASK,
 331        .host_int_rsr_reg = 0x1,
 332        .host_int_status_reg = 0x03,
 333        .host_int_mask_reg = 0x02,
 334        .status_reg_0 = 0xc0,
 335        .status_reg_1 = 0xc1,
 336        .sdio_int_mask = 0xff,
 337        .data_port_mask = 0xffffffff,
 338        .io_port_0_reg = 0xD8,
 339        .io_port_1_reg = 0xD9,
 340        .io_port_2_reg = 0xDA,
 341        .max_mp_regs = 184,
 342        .rd_bitmap_l = 0x04,
 343        .rd_bitmap_u = 0x05,
 344        .rd_bitmap_1l = 0x06,
 345        .rd_bitmap_1u = 0x07,
 346        .wr_bitmap_l = 0x08,
 347        .wr_bitmap_u = 0x09,
 348        .wr_bitmap_1l = 0x0a,
 349        .wr_bitmap_1u = 0x0b,
 350        .rd_len_p0_l = 0x0c,
 351        .rd_len_p0_u = 0x0d,
 352        .card_misc_cfg_reg = 0xcc,
 353        .card_cfg_2_1_reg = 0xcd,
 354        .cmd_rd_len_0 = 0xb4,
 355        .cmd_rd_len_1 = 0xb5,
 356        .cmd_rd_len_2 = 0xb6,
 357        .cmd_rd_len_3 = 0xb7,
 358        .cmd_cfg_0 = 0xb8,
 359        .cmd_cfg_1 = 0xb9,
 360        .cmd_cfg_2 = 0xba,
 361        .cmd_cfg_3 = 0xbb,
 362        .fw_dump_host_ready = 0xee,
 363        .fw_dump_ctrl = 0xe2,
 364        .fw_dump_start = 0xe3,
 365        .fw_dump_end = 0xea,
 366        .func1_dump_reg_start = 0x0,
 367        .func1_dump_reg_end = 0xb,
 368        .func1_scratch_reg = 0xc0,
 369        .func1_spec_reg_num = 8,
 370        .func1_spec_reg_table = {0x4C, 0x50, 0x54, 0x55, 0x58,
 371                                 0x59, 0x5c, 0x5d},
 372};
 373
 374static const struct mwifiex_sdio_card_reg mwifiex_reg_sd8997 = {
 375        .start_rd_port = 0,
 376        .start_wr_port = 0,
 377        .base_0_reg = 0xF8,
 378        .base_1_reg = 0xF9,
 379        .poll_reg = 0x5C,
 380        .host_int_enable = UP_LD_HOST_INT_MASK | DN_LD_HOST_INT_MASK |
 381                        CMD_PORT_UPLD_INT_MASK | CMD_PORT_DNLD_INT_MASK,
 382        .host_int_rsr_reg = 0x4,
 383        .host_int_status_reg = 0x0C,
 384        .host_int_mask_reg = 0x08,
 385        .status_reg_0 = 0xE8,
 386        .status_reg_1 = 0xE9,
 387        .sdio_int_mask = 0xff,
 388        .data_port_mask = 0xffffffff,
 389        .io_port_0_reg = 0xE4,
 390        .io_port_1_reg = 0xE5,
 391        .io_port_2_reg = 0xE6,
 392        .max_mp_regs = 196,
 393        .rd_bitmap_l = 0x10,
 394        .rd_bitmap_u = 0x11,
 395        .rd_bitmap_1l = 0x12,
 396        .rd_bitmap_1u = 0x13,
 397        .wr_bitmap_l = 0x14,
 398        .wr_bitmap_u = 0x15,
 399        .wr_bitmap_1l = 0x16,
 400        .wr_bitmap_1u = 0x17,
 401        .rd_len_p0_l = 0x18,
 402        .rd_len_p0_u = 0x19,
 403        .card_misc_cfg_reg = 0xd8,
 404        .card_cfg_2_1_reg = 0xd9,
 405        .cmd_rd_len_0 = 0xc0,
 406        .cmd_rd_len_1 = 0xc1,
 407        .cmd_rd_len_2 = 0xc2,
 408        .cmd_rd_len_3 = 0xc3,
 409        .cmd_cfg_0 = 0xc4,
 410        .cmd_cfg_1 = 0xc5,
 411        .cmd_cfg_2 = 0xc6,
 412        .cmd_cfg_3 = 0xc7,
 413        .fw_dump_host_ready = 0xcc,
 414        .fw_dump_ctrl = 0xf0,
 415        .fw_dump_start = 0xf1,
 416        .fw_dump_end = 0xf8,
 417        .func1_dump_reg_start = 0x10,
 418        .func1_dump_reg_end = 0x17,
 419        .func1_scratch_reg = 0xe8,
 420        .func1_spec_reg_num = 13,
 421        .func1_spec_reg_table = {0x08, 0x58, 0x5C, 0x5D,
 422                                 0x60, 0x61, 0x62, 0x64,
 423                                 0x65, 0x66, 0x68, 0x69,
 424                                 0x6a},
 425};
 426
 427static const struct mwifiex_sdio_card_reg mwifiex_reg_sd8887 = {
 428        .start_rd_port = 0,
 429        .start_wr_port = 0,
 430        .base_0_reg = 0x6C,
 431        .base_1_reg = 0x6D,
 432        .poll_reg = 0x5C,
 433        .host_int_enable = UP_LD_HOST_INT_MASK | DN_LD_HOST_INT_MASK |
 434                        CMD_PORT_UPLD_INT_MASK | CMD_PORT_DNLD_INT_MASK,
 435        .host_int_rsr_reg = 0x4,
 436        .host_int_status_reg = 0x0C,
 437        .host_int_mask_reg = 0x08,
 438        .status_reg_0 = 0x90,
 439        .status_reg_1 = 0x91,
 440        .sdio_int_mask = 0xff,
 441        .data_port_mask = 0xffffffff,
 442        .io_port_0_reg = 0xE4,
 443        .io_port_1_reg = 0xE5,
 444        .io_port_2_reg = 0xE6,
 445        .max_mp_regs = 196,
 446        .rd_bitmap_l = 0x10,
 447        .rd_bitmap_u = 0x11,
 448        .rd_bitmap_1l = 0x12,
 449        .rd_bitmap_1u = 0x13,
 450        .wr_bitmap_l = 0x14,
 451        .wr_bitmap_u = 0x15,
 452        .wr_bitmap_1l = 0x16,
 453        .wr_bitmap_1u = 0x17,
 454        .rd_len_p0_l = 0x18,
 455        .rd_len_p0_u = 0x19,
 456        .card_misc_cfg_reg = 0xd8,
 457        .card_cfg_2_1_reg = 0xd9,
 458        .cmd_rd_len_0 = 0xc0,
 459        .cmd_rd_len_1 = 0xc1,
 460        .cmd_rd_len_2 = 0xc2,
 461        .cmd_rd_len_3 = 0xc3,
 462        .cmd_cfg_0 = 0xc4,
 463        .cmd_cfg_1 = 0xc5,
 464        .cmd_cfg_2 = 0xc6,
 465        .cmd_cfg_3 = 0xc7,
 466        .func1_dump_reg_start = 0x10,
 467        .func1_dump_reg_end = 0x17,
 468        .func1_scratch_reg = 0x90,
 469        .func1_spec_reg_num = 13,
 470        .func1_spec_reg_table = {0x08, 0x58, 0x5C, 0x5D, 0x60,
 471                                 0x61, 0x62, 0x64, 0x65, 0x66,
 472                                 0x68, 0x69, 0x6a},
 473};
 474
 475static const struct mwifiex_sdio_device mwifiex_sdio_sd8786 = {
 476        .firmware = SD8786_DEFAULT_FW_NAME,
 477        .reg = &mwifiex_reg_sd87xx,
 478        .max_ports = 16,
 479        .mp_agg_pkt_limit = 8,
 480        .tx_buf_size = MWIFIEX_TX_DATA_BUF_SIZE_2K,
 481        .mp_tx_agg_buf_size = MWIFIEX_MP_AGGR_BUF_SIZE_16K,
 482        .mp_rx_agg_buf_size = MWIFIEX_MP_AGGR_BUF_SIZE_16K,
 483        .supports_sdio_new_mode = false,
 484        .has_control_mask = true,
 485        .can_dump_fw = false,
 486        .can_auto_tdls = false,
 487        .can_ext_scan = false,
 488};
 489
 490static const struct mwifiex_sdio_device mwifiex_sdio_sd8787 = {
 491        .firmware = SD8787_DEFAULT_FW_NAME,
 492        .reg = &mwifiex_reg_sd87xx,
 493        .max_ports = 16,
 494        .mp_agg_pkt_limit = 8,
 495        .tx_buf_size = MWIFIEX_TX_DATA_BUF_SIZE_2K,
 496        .mp_tx_agg_buf_size = MWIFIEX_MP_AGGR_BUF_SIZE_16K,
 497        .mp_rx_agg_buf_size = MWIFIEX_MP_AGGR_BUF_SIZE_16K,
 498        .supports_sdio_new_mode = false,
 499        .has_control_mask = true,
 500        .can_dump_fw = false,
 501        .can_auto_tdls = false,
 502        .can_ext_scan = true,
 503};
 504
 505static const struct mwifiex_sdio_device mwifiex_sdio_sd8797 = {
 506        .firmware = SD8797_DEFAULT_FW_NAME,
 507        .reg = &mwifiex_reg_sd87xx,
 508        .max_ports = 16,
 509        .mp_agg_pkt_limit = 8,
 510        .tx_buf_size = MWIFIEX_TX_DATA_BUF_SIZE_2K,
 511        .mp_tx_agg_buf_size = MWIFIEX_MP_AGGR_BUF_SIZE_16K,
 512        .mp_rx_agg_buf_size = MWIFIEX_MP_AGGR_BUF_SIZE_16K,
 513        .supports_sdio_new_mode = false,
 514        .has_control_mask = true,
 515        .can_dump_fw = false,
 516        .can_auto_tdls = false,
 517        .can_ext_scan = true,
 518};
 519
 520static const struct mwifiex_sdio_device mwifiex_sdio_sd8897 = {
 521        .firmware = SD8897_DEFAULT_FW_NAME,
 522        .reg = &mwifiex_reg_sd8897,
 523        .max_ports = 32,
 524        .mp_agg_pkt_limit = 16,
 525        .tx_buf_size = MWIFIEX_TX_DATA_BUF_SIZE_4K,
 526        .mp_tx_agg_buf_size = MWIFIEX_MP_AGGR_BUF_SIZE_MAX,
 527        .mp_rx_agg_buf_size = MWIFIEX_MP_AGGR_BUF_SIZE_MAX,
 528        .supports_sdio_new_mode = true,
 529        .has_control_mask = false,
 530        .can_dump_fw = true,
 531        .can_auto_tdls = false,
 532        .can_ext_scan = true,
 533};
 534
 535static const struct mwifiex_sdio_device mwifiex_sdio_sd8997 = {
 536        .firmware = SD8997_DEFAULT_FW_NAME,
 537        .reg = &mwifiex_reg_sd8997,
 538        .max_ports = 32,
 539        .mp_agg_pkt_limit = 16,
 540        .tx_buf_size = MWIFIEX_TX_DATA_BUF_SIZE_4K,
 541        .mp_tx_agg_buf_size = MWIFIEX_MP_AGGR_BUF_SIZE_MAX,
 542        .mp_rx_agg_buf_size = MWIFIEX_MP_AGGR_BUF_SIZE_MAX,
 543        .supports_sdio_new_mode = true,
 544        .has_control_mask = false,
 545        .can_dump_fw = true,
 546        .fw_dump_enh = true,
 547        .can_auto_tdls = false,
 548        .can_ext_scan = true,
 549};
 550
 551static const struct mwifiex_sdio_device mwifiex_sdio_sd8887 = {
 552        .firmware = SD8887_DEFAULT_FW_NAME,
 553        .reg = &mwifiex_reg_sd8887,
 554        .max_ports = 32,
 555        .mp_agg_pkt_limit = 16,
 556        .tx_buf_size = MWIFIEX_TX_DATA_BUF_SIZE_2K,
 557        .mp_tx_agg_buf_size = MWIFIEX_MP_AGGR_BUF_SIZE_32K,
 558        .mp_rx_agg_buf_size = MWIFIEX_MP_AGGR_BUF_SIZE_32K,
 559        .supports_sdio_new_mode = true,
 560        .has_control_mask = false,
 561        .can_dump_fw = false,
 562        .can_auto_tdls = true,
 563        .can_ext_scan = true,
 564};
 565
 566static const struct mwifiex_sdio_device mwifiex_sdio_sd8801 = {
 567        .firmware = SD8801_DEFAULT_FW_NAME,
 568        .reg = &mwifiex_reg_sd87xx,
 569        .max_ports = 16,
 570        .mp_agg_pkt_limit = 8,
 571        .supports_sdio_new_mode = false,
 572        .has_control_mask = true,
 573        .tx_buf_size = MWIFIEX_TX_DATA_BUF_SIZE_2K,
 574        .mp_tx_agg_buf_size = MWIFIEX_MP_AGGR_BUF_SIZE_16K,
 575        .mp_rx_agg_buf_size = MWIFIEX_MP_AGGR_BUF_SIZE_16K,
 576        .can_dump_fw = false,
 577        .can_auto_tdls = false,
 578        .can_ext_scan = true,
 579};
 580
 581/*
 582 * .cmdrsp_complete handler
 583 */
 584static inline int mwifiex_sdio_cmdrsp_complete(struct mwifiex_adapter *adapter,
 585                                               struct sk_buff *skb)
 586{
 587        dev_kfree_skb_any(skb);
 588        return 0;
 589}
 590
 591/*
 592 * .event_complete handler
 593 */
 594static inline int mwifiex_sdio_event_complete(struct mwifiex_adapter *adapter,
 595                                              struct sk_buff *skb)
 596{
 597        dev_kfree_skb_any(skb);
 598        return 0;
 599}
 600
 601static inline bool
 602mp_rx_aggr_port_limit_reached(struct sdio_mmc_card *card)
 603{
 604        u8 tmp;
 605
 606        if (card->curr_rd_port < card->mpa_rx.start_port) {
 607                if (card->supports_sdio_new_mode)
 608                        tmp = card->mp_end_port >> 1;
 609                else
 610                        tmp = card->mp_agg_pkt_limit;
 611
 612                if (((card->max_ports - card->mpa_rx.start_port) +
 613                    card->curr_rd_port) >= tmp)
 614                        return true;
 615        }
 616
 617        if (!card->supports_sdio_new_mode)
 618                return false;
 619
 620        if ((card->curr_rd_port - card->mpa_rx.start_port) >=
 621            (card->mp_end_port >> 1))
 622                return true;
 623
 624        return false;
 625}
 626
 627static inline bool
 628mp_tx_aggr_port_limit_reached(struct sdio_mmc_card *card)
 629{
 630        u16 tmp;
 631
 632        if (card->curr_wr_port < card->mpa_tx.start_port) {
 633                if (card->supports_sdio_new_mode)
 634                        tmp = card->mp_end_port >> 1;
 635                else
 636                        tmp = card->mp_agg_pkt_limit;
 637
 638                if (((card->max_ports - card->mpa_tx.start_port) +
 639                    card->curr_wr_port) >= tmp)
 640                        return true;
 641        }
 642
 643        if (!card->supports_sdio_new_mode)
 644                return false;
 645
 646        if ((card->curr_wr_port - card->mpa_tx.start_port) >=
 647            (card->mp_end_port >> 1))
 648                return true;
 649
 650        return false;
 651}
 652
 653/* Prepare to copy current packet from card to SDIO Rx aggregation buffer */
 654static inline void mp_rx_aggr_setup(struct sdio_mmc_card *card,
 655                                    u16 rx_len, u8 port)
 656{
 657        card->mpa_rx.buf_len += rx_len;
 658
 659        if (!card->mpa_rx.pkt_cnt)
 660                card->mpa_rx.start_port = port;
 661
 662        if (card->supports_sdio_new_mode) {
 663                card->mpa_rx.ports |= (1 << port);
 664        } else {
 665                if (card->mpa_rx.start_port <= port)
 666                        card->mpa_rx.ports |= 1 << (card->mpa_rx.pkt_cnt);
 667                else
 668                        card->mpa_rx.ports |= 1 << (card->mpa_rx.pkt_cnt + 1);
 669        }
 670        card->mpa_rx.skb_arr[card->mpa_rx.pkt_cnt] = NULL;
 671        card->mpa_rx.len_arr[card->mpa_rx.pkt_cnt] = rx_len;
 672        card->mpa_rx.pkt_cnt++;
 673}
 674#endif /* _MWIFIEX_SDIO_H */
 675