/******************************************************************************
 *
 * Copyright(c) 2007 - 2010 Realtek Corporation. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of version 2 of the GNU General Public License as
 * published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful, but WITHOUT
 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
 * more details.
 *
 * You should have received a copy of the GNU General Public License along with
 * this program; if not, write to the Free Software Foundation, Inc.,
 * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
 *
 * Modifications for inclusion into the Linux staging tree are
 * Copyright(c) 2010 Larry Finger. All rights reserved.
 *
 * Contact information:
 * WLAN FAE <wlanfae@realtek.com>
 * Larry Finger <Larry.Finger@lwfinger.net>
 *
 ******************************************************************************/
#ifndef __IEEE80211_H
#define __IEEE80211_H

#include "osdep_service.h"
#include "drv_types.h"
#include "wifi.h"
#include <linux/compiler.h>
#include <linux/wireless.h>

#define MGMT_QUEUE_NUM 5
#define ETH_ALEN        6
#define IEEE_CMD_SET_WPA_PARAM                  1
#define IEEE_CMD_SET_WPA_IE                     2
#define IEEE_CMD_SET_ENCRYPTION                 3
#define IEEE_CMD_MLME                           4

#define IEEE_PARAM_WPA_ENABLED                  1
#define IEEE_PARAM_TKIP_COUNTERMEASURES         2
#define IEEE_PARAM_DROP_UNENCRYPTED             3
#define IEEE_PARAM_PRIVACY_INVOKED              4
#define IEEE_PARAM_AUTH_ALGS                    5
#define IEEE_PARAM_IEEE_802_1X                  6
#define IEEE_PARAM_WPAX_SELECT                  7

#define AUTH_ALG_OPEN_SYSTEM                    0x1
#define AUTH_ALG_SHARED_KEY                     0x2
#define AUTH_ALG_LEAP                           0x00000004

#define IEEE_MLME_STA_DEAUTH                    1
#define IEEE_MLME_STA_DISASSOC                  2

#define IEEE_CRYPT_ERR_UNKNOWN_ALG              2
#define IEEE_CRYPT_ERR_UNKNOWN_ADDR             3
#define IEEE_CRYPT_ERR_CRYPT_INIT_FAILED        4
#define IEEE_CRYPT_ERR_KEY_SET_FAILED           5
#define IEEE_CRYPT_ERR_TX_KEY_SET_FAILED        6
#define IEEE_CRYPT_ERR_CARD_CONF_FAILED         7


#define IEEE_CRYPT_ALG_NAME_LEN                 16

#define WPA_CIPHER_NONE                         BIT(0)
#define WPA_CIPHER_WEP40                        BIT(1)
#define WPA_CIPHER_WEP104                       BIT(2)
#define WPA_CIPHER_TKIP                         BIT(3)
#define WPA_CIPHER_CCMP                         BIT(4)



#define WPA_SELECTOR_LEN                        4
#define RSN_HEADER_LEN                          4

#define RSN_SELECTOR_LEN 4

enum NETWORK_TYPE {
        WIRELESS_INVALID        = 0,
        WIRELESS_11B            = 1,
        WIRELESS_11G            = 2,
        WIRELESS_11BG           = (WIRELESS_11B | WIRELESS_11G),
        WIRELESS_11A            = 4,
        WIRELESS_11N            = 8,
        WIRELESS_11GN           = (WIRELESS_11G | WIRELESS_11N),
        WIRELESS_11BGN          = (WIRELESS_11B | WIRELESS_11G | WIRELESS_11N),
};


struct ieee_param {
        u32 cmd;
        u8 sta_addr[ETH_ALEN];
        union {
                struct {
                        u8 name;
                        u32 value;
                } wpa_param;
                struct {
                        u32 len;
                        u8 reserved[32];
                        u8 data[0];
                } wpa_ie;
                struct {
                        int command;
                        int reason_code;
                } mlme;
                struct {
                        u8 alg[IEEE_CRYPT_ALG_NAME_LEN];
                        u8 set_tx;
                        u32 err;
                        u8 idx;
                        u8 seq[8]; /* sequence counter (set: RX, get: TX) */
                        u16 key_len;
                        u8 key[0];
                } crypt;
        } u;
};

#define IEEE80211_DATA_LEN              2304
/* Maximum size for the MA-UNITDATA primitive, 802.11 standard section
   6.2.1.1.2.

   The figure in section 7.1.2 suggests a body size of up to 2312
   bytes is allowed, which is a bit confusing, I suspect this
   represents the 2304 bytes of real data, plus a possible 8 bytes of
   WEP IV and ICV. (this interpretation suggested by Ramiro Barreiro) */

#define IEEE80211_HLEN                  30
#define IEEE80211_FRAME_LEN             (IEEE80211_DATA_LEN + IEEE80211_HLEN)

/* this is stolen from ipw2200 driver */
#define IEEE_IBSS_MAC_HASH_SIZE 31

struct ieee_ibss_seq {
        u8 mac[ETH_ALEN];
        u16 seq_num;
        u16 frag_num;
        unsigned long packet_time;
        struct list_head list;
};

struct ieee80211_hdr {
        u16 frame_ctl;
        u16 duration_id;
        u8 addr1[ETH_ALEN];
        u8 addr2[ETH_ALEN];
        u8 addr3[ETH_ALEN];
        u16 seq_ctl;
        u8 addr4[ETH_ALEN];
} __packed;

struct ieee80211_hdr_3addr {
        u16 frame_ctl;
        u16 duration_id;
        u8 addr1[ETH_ALEN];
        u8 addr2[ETH_ALEN];
        u8 addr3[ETH_ALEN];
        u16 seq_ctl;
} __packed;


struct  ieee80211_hdr_qos {
        u16 frame_ctl;
        u16 duration_id;
        u8 addr1[ETH_ALEN];
        u8 addr2[ETH_ALEN];
        u8 addr3[ETH_ALEN];
        u16 seq_ctl;
        u8 addr4[ETH_ALEN];
        u16     qc;
}  __packed;

struct  ieee80211_hdr_3addr_qos {
        u16 frame_ctl;
        u16 duration_id;
        u8  addr1[ETH_ALEN];
        u8  addr2[ETH_ALEN];
        u8  addr3[ETH_ALEN];
        u16 seq_ctl;
        u16 qc;
}  __packed;

struct eapol {
        u8 snap[6];
        u16 ethertype;
        u8 version;
        u8 type;
        u16 length;
} __packed;


enum eap_type {
        EAP_PACKET = 0,
        EAPOL_START,
        EAPOL_LOGOFF,
        EAPOL_KEY,
        EAPOL_ENCAP_ASF_ALERT
};

#define IEEE80211_3ADDR_LEN 24
#define IEEE80211_4ADDR_LEN 30
#define IEEE80211_FCS_LEN    4

#define MIN_FRAG_THRESHOLD     256U
#define MAX_FRAG_THRESHOLD     2346U

/* Frame control field constants */
#define IEEE80211_FCTL_VERS             0x0002
#define IEEE80211_FCTL_FTYPE            0x000c
#define IEEE80211_FCTL_STYPE            0x00f0
#define IEEE80211_FCTL_TODS             0x0100
#define IEEE80211_FCTL_FROMDS           0x0200
#define IEEE80211_FCTL_MOREFRAGS        0x0400
#define IEEE80211_FCTL_RETRY            0x0800
#define IEEE80211_FCTL_PM               0x1000
#define IEEE80211_FCTL_MOREDATA 0x2000
#define IEEE80211_FCTL_WEP              0x4000
#define IEEE80211_FCTL_ORDER            0x8000

#define IEEE80211_FTYPE_MGMT            0x0000
#define IEEE80211_FTYPE_CTL             0x0004
#define IEEE80211_FTYPE_DATA            0x0008

/* management */
#define IEEE80211_STYPE_ASSOC_REQ       0x0000
#define IEEE80211_STYPE_ASSOC_RESP      0x0010
#define IEEE80211_STYPE_REASSOC_REQ     0x0020
#define IEEE80211_STYPE_REASSOC_RESP    0x0030
#define IEEE80211_STYPE_PROBE_REQ       0x0040
#define IEEE80211_STYPE_PROBE_RESP      0x0050
#define IEEE80211_STYPE_BEACON          0x0080
#define IEEE80211_STYPE_ATIM            0x0090
#define IEEE80211_STYPE_DISASSOC        0x00A0
#define IEEE80211_STYPE_AUTH            0x00B0
#define IEEE80211_STYPE_DEAUTH          0x00C0

/* control */
#define IEEE80211_STYPE_PSPOLL          0x00A0
#define IEEE80211_STYPE_RTS             0x00B0
#define IEEE80211_STYPE_CTS             0x00C0
#define IEEE80211_STYPE_ACK             0x00D0
#define IEEE80211_STYPE_CFEND           0x00E0
#define IEEE80211_STYPE_CFENDACK        0x00F0

/* data */
#define IEEE80211_STYPE_DATA            0x0000
#define IEEE80211_STYPE_DATA_CFACK      0x0010
#define IEEE80211_STYPE_DATA_CFPOLL     0x0020
#define IEEE80211_STYPE_DATA_CFACKPOLL  0x0030
#define IEEE80211_STYPE_NULLFUNC        0x0040
#define IEEE80211_STYPE_CFACK           0x0050
#define IEEE80211_STYPE_CFPOLL          0x0060
#define IEEE80211_STYPE_CFACKPOLL       0x0070
#define IEEE80211_QOS_DATAGRP           0x0080
#define IEEE80211_QoS_DATAGRP           IEEE80211_QOS_DATAGRP

#define IEEE80211_SCTL_FRAG             0x000F
#define IEEE80211_SCTL_SEQ              0xFFF0

/* QoS,QOS */
#define NORMAL_ACK                      0
#define NO_ACK                          1
#define NON_EXPLICIT_ACK        2
#define BLOCK_ACK                       3

#ifndef ETH_P_PAE
#define ETH_P_PAE 0x888E /* Port Access Entity (IEEE 802.1X) */
#endif /* ETH_P_PAE */

#define ETH_P_PREAUTH 0x88C7 /* IEEE 802.11i pre-authentication */

#define ETH_P_ECONET    0x0018

#ifndef ETH_P_80211_RAW
#define ETH_P_80211_RAW (ETH_P_ECONET + 1)
#endif

/* IEEE 802.11 defines */

#define P80211_OUI_LEN 3

struct ieee80211_snap_hdr {
        u8    dsap;   /* always 0xAA */
        u8    ssap;   /* always 0xAA */
        u8    ctrl;   /* always 0x03 */
        u8    oui[P80211_OUI_LEN];    /* organizational universal id */
} __packed;

#define SNAP_SIZE sizeof(struct ieee80211_snap_hdr)

#define WLAN_FC_GET_TYPE(fc) ((fc) & IEEE80211_FCTL_FTYPE)
#define WLAN_FC_GET_STYPE(fc) ((fc) & IEEE80211_FCTL_STYPE)

#define WLAN_QC_GET_TID(qc) ((qc) & 0x0f)

#define WLAN_GET_SEQ_FRAG(seq) ((seq) & IEEE80211_SCTL_FRAG)
#define WLAN_GET_SEQ_SEQ(seq)  ((seq) & IEEE80211_SCTL_SEQ)

/* Authentication algorithms */
#define WLAN_AUTH_OPEN 0
#define WLAN_AUTH_SHARED_KEY 1

#define WLAN_AUTH_CHALLENGE_LEN 128

#define WLAN_CAPABILITY_BSS (1<<0)
#define WLAN_CAPABILITY_IBSS (1<<1)
#define WLAN_CAPABILITY_CF_POLLABLE (1<<2)
#define WLAN_CAPABILITY_CF_POLL_REQUEST (1<<3)
#define WLAN_CAPABILITY_PRIVACY (1<<4)
#define WLAN_CAPABILITY_SHORT_PREAMBLE (1<<5)
#define WLAN_CAPABILITY_PBCC (1<<6)
#define WLAN_CAPABILITY_CHANNEL_AGILITY (1<<7)
#define WLAN_CAPABILITY_SHORT_SLOT (1<<10)

/* Status codes */
#define WLAN_STATUS_SUCCESS 0
#define WLAN_STATUS_UNSPECIFIED_FAILURE 1
#define WLAN_STATUS_CAPS_UNSUPPORTED 10
#define WLAN_STATUS_REASSOC_NO_ASSOC 11
#define WLAN_STATUS_ASSOC_DENIED_UNSPEC 12
#define WLAN_STATUS_NOT_SUPPORTED_AUTH_ALG 13
#define WLAN_STATUS_UNKNOWN_AUTH_TRANSACTION 14
#define WLAN_STATUS_CHALLENGE_FAIL 15
#define WLAN_STATUS_AUTH_TIMEOUT 16
#define WLAN_STATUS_AP_UNABLE_TO_HANDLE_NEW_STA 17
#define WLAN_STATUS_ASSOC_DENIED_RATES 18
/* 802.11b */
#define WLAN_STATUS_ASSOC_DENIED_NOSHORT 19
#define WLAN_STATUS_ASSOC_DENIED_NOPBCC 20
#define WLAN_STATUS_ASSOC_DENIED_NOAGILITY 21

/* Reason codes */
#define WLAN_REASON_UNSPECIFIED 1
#define WLAN_REASON_PREV_AUTH_NOT_VALID 2
#define WLAN_REASON_DEAUTH_LEAVING 3
#define WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY 4
#define WLAN_REASON_DISASSOC_AP_BUSY 5
#define WLAN_REASON_CLASS2_FRAME_FROM_NONAUTH_STA 6
#define WLAN_REASON_CLASS3_FRAME_FROM_NONASSOC_STA 7
#define WLAN_REASON_DISASSOC_STA_HAS_LEFT 8
#define WLAN_REASON_STA_REQ_ASSOC_WITHOUT_AUTH 9


/* Information Element IDs */
#define WLAN_EID_SSID 0
#define WLAN_EID_SUPP_RATES 1
#define WLAN_EID_FH_PARAMS 2
#define WLAN_EID_DS_PARAMS 3
#define WLAN_EID_CF_PARAMS 4
#define WLAN_EID_TIM 5
#define WLAN_EID_IBSS_PARAMS 6
#define WLAN_EID_CHALLENGE 16
#define WLAN_EID_RSN 48
#define WLAN_EID_GENERIC 221

#define IEEE80211_MGMT_HDR_LEN 24
#define IEEE80211_DATA_HDR3_LEN 24
#define IEEE80211_DATA_HDR4_LEN 30


#define IEEE80211_STATMASK_SIGNAL (1<<0)
#define IEEE80211_STATMASK_RSSI (1<<1)
#define IEEE80211_STATMASK_NOISE (1<<2)
#define IEEE80211_STATMASK_RATE (1<<3)
#define IEEE80211_STATMASK_WEMASK 0x7


#define IEEE80211_CCK_MODULATION    (1<<0)
#define IEEE80211_OFDM_MODULATION   (1<<1)

#define IEEE80211_24GHZ_BAND     (1<<0)
#define IEEE80211_52GHZ_BAND     (1<<1)

#define IEEE80211_CCK_RATE_LEN                  4
#define IEEE80211_NUM_OFDM_RATESLEN     8


#define IEEE80211_CCK_RATE_1MB                  0x02
#define IEEE80211_CCK_RATE_2MB                  0x04
#define IEEE80211_CCK_RATE_5MB                  0x0B
#define IEEE80211_CCK_RATE_11MB                 0x16
#define IEEE80211_OFDM_RATE_LEN                 8
#define IEEE80211_OFDM_RATE_6MB                 0x0C
#define IEEE80211_OFDM_RATE_9MB                 0x12
#define IEEE80211_OFDM_RATE_12MB                0x18
#define IEEE80211_OFDM_RATE_18MB                0x24
#define IEEE80211_OFDM_RATE_24MB                0x30
#define IEEE80211_OFDM_RATE_36MB                0x48
#define IEEE80211_OFDM_RATE_48MB                0x60
#define IEEE80211_OFDM_RATE_54MB                0x6C
#define IEEE80211_BASIC_RATE_MASK               0x80

#define IEEE80211_CCK_RATE_1MB_MASK             (1<<0)
#define IEEE80211_CCK_RATE_2MB_MASK             (1<<1)
#define IEEE80211_CCK_RATE_5MB_MASK             (1<<2)
#define IEEE80211_CCK_RATE_11MB_MASK            (1<<3)
#define IEEE80211_OFDM_RATE_6MB_MASK            (1<<4)
#define IEEE80211_OFDM_RATE_9MB_MASK            (1<<5)
#define IEEE80211_OFDM_RATE_12MB_MASK           (1<<6)
#define IEEE80211_OFDM_RATE_18MB_MASK           (1<<7)
#define IEEE80211_OFDM_RATE_24MB_MASK           (1<<8)
#define IEEE80211_OFDM_RATE_36MB_MASK           (1<<9)
#define IEEE80211_OFDM_RATE_48MB_MASK           (1<<10)
#define IEEE80211_OFDM_RATE_54MB_MASK           (1<<11)

#define IEEE80211_CCK_RATES_MASK                0x0000000F
#define IEEE80211_CCK_BASIC_RATES_MASK          (IEEE80211_CCK_RATE_1MB_MASK | \
        IEEE80211_CCK_RATE_2MB_MASK)
#define IEEE80211_CCK_DEFAULT_RATES_MASK   (IEEE80211_CCK_BASIC_RATES_MASK | \
                                           IEEE80211_CCK_RATE_5MB_MASK | \
                                           IEEE80211_CCK_RATE_11MB_MASK)

#define IEEE80211_OFDM_RATES_MASK               0x00000FF0
#define IEEE80211_OFDM_BASIC_RATES_MASK (IEEE80211_OFDM_RATE_6MB_MASK | \
        IEEE80211_OFDM_RATE_12MB_MASK | \
        IEEE80211_OFDM_RATE_24MB_MASK)
#define IEEE80211_OFDM_DEFAULT_RATES_MASK  (IEEE80211_OFDM_BASIC_RATES_MASK | \
                                           IEEE80211_OFDM_RATE_9MB_MASK  | \
                                           IEEE80211_OFDM_RATE_18MB_MASK | \
                                           IEEE80211_OFDM_RATE_36MB_MASK | \
                                           IEEE80211_OFDM_RATE_48MB_MASK | \
                                           IEEE80211_OFDM_RATE_54MB_MASK)
#define IEEE80211_DEFAULT_RATES_MASK (IEEE80211_OFDM_DEFAULT_RATES_MASK | \
                                     IEEE80211_CCK_DEFAULT_RATES_MASK)

#define IEEE80211_NUM_OFDM_RATES            8
#define IEEE80211_NUM_CCK_RATES             4
#define IEEE80211_OFDM_SHIFT_MASK_A         4




/* NOTE: This data is for statistical purposes; not all hardware provides this
 *       information for frames received.  Not setting these will not cause
 *       any adverse affects. */
struct ieee80211_rx_stats {
        s8 rssi;
        u8 signal;
        u8 noise;
        u8 received_channel;
        u16 rate; /* in 100 kbps */
        u8 mask;
        u8 freq;
        u16 len;
};

/* IEEE 802.11 requires that STA supports concurrent reception of at least
 * three fragmented frames. This define can be increased to support more
 * concurrent frames, but it should be noted that each entry can consume about
 * 2 kB of RAM and increasing cache size will slow down frame reassembly. */
#define IEEE80211_FRAG_CACHE_LEN 4

struct ieee80211_frag_entry {
        u32 first_frag_time;
        uint seq;
        uint last_frag;
        uint qos;   /*jackson*/
        uint tid;       /*jackson*/
        struct sk_buff *skb;
        u8 src_addr[ETH_ALEN];
        u8 dst_addr[ETH_ALEN];
};

struct ieee80211_stats {
        uint tx_unicast_frames;
        uint tx_multicast_frames;
        uint tx_fragments;
        uint tx_unicast_octets;
        uint tx_multicast_octets;
        uint tx_deferred_transmissions;
        uint tx_single_retry_frames;
        uint tx_multiple_retry_frames;
        uint tx_retry_limit_exceeded;
        uint tx_discards;
        uint rx_unicast_frames;
        uint rx_multicast_frames;
        uint rx_fragments;
        uint rx_unicast_octets;
        uint rx_multicast_octets;
        uint rx_fcs_errors;
        uint rx_discards_no_buffer;
        uint tx_discards_wrong_sa;
        uint rx_discards_undecryptable;
        uint rx_message_in_msg_fragments;
        uint rx_message_in_bad_msg_fragments;
};

struct ieee80211_softmac_stats {
        uint rx_ass_ok;
        uint rx_ass_err;
        uint rx_probe_rq;
        uint tx_probe_rs;
        uint tx_beacons;
        uint rx_auth_rq;
        uint rx_auth_rs_ok;
        uint rx_auth_rs_err;
        uint tx_auth_rq;
        uint no_auth_rs;
        uint no_ass_rs;
        uint tx_ass_rq;
        uint rx_ass_rq;
        uint tx_probe_rq;
        uint reassoc;
        uint swtxstop;
        uint swtxawake;
};

#define SEC_KEY_1         (1<<0)
#define SEC_KEY_2         (1<<1)
#define SEC_KEY_3         (1<<2)
#define SEC_KEY_4         (1<<3)
#define SEC_ACTIVE_KEY    (1<<4)
#define SEC_AUTH_MODE     (1<<5)
#define SEC_UNICAST_GROUP (1<<6)
#define SEC_LEVEL         (1<<7)
#define SEC_ENABLED       (1<<8)

#define SEC_LEVEL_0      0 /* None */
#define SEC_LEVEL_1      1 /* WEP 40 and 104 bit */
#define SEC_LEVEL_2      2 /* Level 1 + TKIP */
#define SEC_LEVEL_2_CKIP 3 /* Level 1 + CKIP */
#define SEC_LEVEL_3      4 /* Level 2 + CCMP */

#define WEP_KEYS 4
#define WEP_KEY_LEN 13

struct ieee80211_security {
        u16 active_key:2,
            enabled:1,
            auth_mode:2,
            auth_algo:4,
            unicast_uses_group:1;
        u8 key_sizes[WEP_KEYS];
        u8 keys[WEP_KEYS][WEP_KEY_LEN];
        u8 level;
        u16 flags;
} __packed;

/*

 802.11 data frame from AP

      ,-------------------------------------------------------------------.
Bytes |  2   |  2   |    6    |    6    |    6    |  2   | 0..2312 |   4  |
      |------|------|---------|---------|---------|------|---------|------|
Desc. | ctrl | dura |  DA/RA  |   TA    |    SA   | Sequ |  frame  |  fcs |
      |      | tion | (BSSID) |         |         | ence |  data   |      |
      `-------------------------------------------------------------------'

Total: 28-2340 bytes

*/

struct ieee80211_header_data {
        u16 frame_ctl;
        u16 duration_id;
        u8 addr1[6];
        u8 addr2[6];
        u8 addr3[6];
        u16 seq_ctrl;
};

#define BEACON_PROBE_SSID_ID_POSITION 12

/* Management Frame Information Element Types */
#define MFIE_TYPE_SSID       0
#define MFIE_TYPE_RATES      1
#define MFIE_TYPE_FH_SET     2
#define MFIE_TYPE_DS_SET     3
#define MFIE_TYPE_CF_SET     4
#define MFIE_TYPE_TIM        5
#define MFIE_TYPE_IBSS_SET   6
#define MFIE_TYPE_CHALLENGE  16
#define MFIE_TYPE_ERP        42
#define MFIE_TYPE_RSN        48
#define MFIE_TYPE_RATES_EX   50
#define MFIE_TYPE_GENERIC    221

struct ieee80211_info_element_hdr {
        u8 id;
        u8 len;
} __packed;

struct ieee80211_info_element {
        u8 id;
        u8 len;
        u8 data[0];
} __packed;

/*
 * These are the data types that can make up management packets
 *
        u16 auth_algorithm;
        u16 auth_sequence;
        u16 beacon_interval;
        u16 capability;
        u8 current_ap[ETH_ALEN];
        u16 listen_interval;
        struct {
                u16 association_id:14, reserved:2;
        } __packed;
        u32 time_stamp[2];
        u16 reason;
        u16 status;
*/

#define IEEE80211_DEFAULT_TX_ESSID "Penguin"
#define IEEE80211_DEFAULT_BASIC_RATE 10

struct ieee80211_authentication {
        struct ieee80211_header_data header;
        u16 algorithm;
        u16 transaction;
        u16 status;
} __packed;

struct ieee80211_probe_response {
        struct ieee80211_header_data header;
        u32 time_stamp[2];
        u16 beacon_interval;
        u16 capability;
        struct ieee80211_info_element info_element;
} __packed;

struct ieee80211_probe_request {
        struct ieee80211_header_data header;
} __packed;

struct ieee80211_assoc_request_frame {
        struct ieee80211_hdr_3addr header;
        u16 capability;
        u16 listen_interval;
        struct ieee80211_info_element_hdr info_element;
} __packed;

struct ieee80211_assoc_response_frame {
        struct ieee80211_hdr_3addr header;
        u16 capability;
        u16 status;
        u16 aid;
} __packed;

struct ieee80211_txb {
        u8 nr_frags;
        u8 encrypted;
        u16 reserved;
        u16 frag_size;
        u16 payload_size;
        struct sk_buff *fragments[0];
};

/* SWEEP TABLE ENTRIES NUMBER*/
#define MAX_SWEEP_TAB_ENTRIES             42
#define MAX_SWEEP_TAB_ENTRIES_PER_PACKET  7
/* MAX_RATES_LENGTH needs to be 12.  The spec says 8, and many APs
 * only use 8, and then use extended rates for the remaining supported
 * rates.  Other APs, however, stick all of their supported rates on the
 * main rates information element... */
#define MAX_RATES_LENGTH                  ((u8)12)
#define MAX_RATES_EX_LENGTH               ((u8)16)
#define MAX_NETWORK_COUNT                  128
#define MAX_CHANNEL_NUMBER                 161
#define IEEE80211_SOFTMAC_SCAN_TIME       400
/*(HZ / 2)*/
#define IEEE80211_SOFTMAC_ASSOC_RETRY_TIME (HZ * 2)

#define CRC_LENGTH                 4U

#define MAX_WPA_IE_LEN 128

#define NETWORK_EMPTY_ESSID (1<<0)
#define NETWORK_HAS_OFDM    (1<<1)
#define NETWORK_HAS_CCK     (1<<2)

#define IEEE80211_DTIM_MBCAST 4
#define IEEE80211_DTIM_UCAST 2
#define IEEE80211_DTIM_VALID 1
#define IEEE80211_DTIM_INVALID 0

#define IEEE80211_PS_DISABLED 0
#define IEEE80211_PS_UNICAST IEEE80211_DTIM_UCAST
#define IEEE80211_PS_MBCAST IEEE80211_DTIM_MBCAST
#define IW_ESSID_MAX_SIZE 32
/*
 * join_res:
 * -1: authentication fail
 * -2: association fail
 * > 0: TID
 */

enum ieee80211_state {
        /* the card is not linked at all */
        IEEE80211_NOLINK = 0,
        /* IEEE80211_ASSOCIATING* are for BSS client mode
         * the driver shall not perform RX filtering unless
         * the state is LINKED.
         * The driver shall just check for the state LINKED and
         * defaults to NOLINK for ALL the other states (including
         * LINKED_SCANNING)
         */
        /* the association procedure will start (wq scheduling)*/
        IEEE80211_ASSOCIATING,
        IEEE80211_ASSOCIATING_RETRY,
        /* the association procedure is sending AUTH request*/
        IEEE80211_ASSOCIATING_AUTHENTICATING,
        /* the association procedure has successfully authenticated
         * and is sending association request
         */
        IEEE80211_ASSOCIATING_AUTHENTICATED,
        /* the link is ok. the card associated to a BSS or linked
         * to a ibss cell or acting as an AP and creating the bss
         */
        IEEE80211_LINKED,
        /* same as LINKED, but the driver shall apply RX filter
         * rules as we are in NO_LINK mode. As the card is still
         * logically linked, but it is doing a syncro site survey
         * then it will be back to LINKED state.
         */
        IEEE80211_LINKED_SCANNING,
};

#define DEFAULT_MAX_SCAN_AGE (15 * HZ)
#define DEFAULT_FTS 2346

#define CFG_IEEE80211_RESERVE_FCS (1<<0)
#define CFG_IEEE80211_COMPUTE_FCS (1<<1)

#define MAXTID  16

#define IEEE_A            (1<<0)
#define IEEE_B            (1<<1)
#define IEEE_G            (1<<2)
#define IEEE_MODE_MASK    (IEEE_A|IEEE_B|IEEE_G)

extern inline int ieee80211_is_empty_essid(const char *essid, int essid_len)
{
        /* Single white space is for Linksys APs */
        if (essid_len == 1 && essid[0] == ' ')
                return 1;
        /* Otherwise, if the entire essid is 0, we assume it is hidden */
        while (essid_len) {
                essid_len--;
                if (essid[essid_len] != '\0')
                        return 0;
        }
        return 1;
}

extern inline int ieee80211_get_hdrlen(u16 fc)
{
        int hdrlen = 24;

        switch (WLAN_FC_GET_TYPE(fc)) {
        case IEEE80211_FTYPE_DATA:
                if (fc & IEEE80211_QOS_DATAGRP)
                        hdrlen += 2;
                if ((fc & IEEE80211_FCTL_FROMDS) && (fc & IEEE80211_FCTL_TODS))
                        hdrlen += 6; /* Addr4 */
                break;
        case IEEE80211_FTYPE_CTL:
                switch (WLAN_FC_GET_STYPE(fc)) {
                case IEEE80211_STYPE_CTS:
                case IEEE80211_STYPE_ACK:
                        hdrlen = 10;
                        break;
                default:
                        hdrlen = 16;
                        break;
                }
                break;
        }
        return hdrlen;
}

struct registry_priv;

u8 *r8712_set_ie(u8 *pbuf, sint index, uint len, u8 *source, uint *frlen);
u8 *r8712_get_ie(u8 *pbuf, sint index, sint *len, sint limit);
unsigned char *r8712_get_wpa_ie(unsigned char *pie, int *rsn_ie_len, int limit);
unsigned char *r8712_get_wpa2_ie(unsigned char *pie, int *rsn_ie_len,
                                 int limit);
int r8712_parse_wpa_ie(u8 *wpa_ie, int wpa_ie_len, int *group_cipher,
                        int *pairwise_cipher);
int r8712_parse_wpa2_ie(u8 *wpa_ie, int wpa_ie_len, int *group_cipher,
                        int *pairwise_cipher);
int r8712_get_sec_ie(u8 *in_ie, uint in_len, u8 *rsn_ie, u16 *rsn_len,
                     u8 *wpa_ie, u16 *wpa_len);
int r8712_get_wps_ie(u8 *in_ie, uint in_len, u8 *wps_ie, uint *wps_ielen);
int r8712_generate_ie(struct registry_priv *pregistrypriv);
uint r8712_is_cckrates_included(u8 *rate);
uint r8712_is_cckratesonly_included(u8 *rate);

#endif /* IEEE80211_H */