1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20#include <linux/module.h>
21#include <linux/moduleparam.h>
22#include <linux/videodev2.h>
23#include <linux/delay.h>
24#include <linux/workqueue.h>
25#include <linux/dvb/frontend.h>
26#include <linux/i2c.h>
27
28#include <media/dvb_frontend.h>
29
30#include "xc5000.h"
31#include "tuner-i2c.h"
32
33static int debug;
34module_param(debug, int, 0644);
35MODULE_PARM_DESC(debug, "Turn on/off debugging (default:off).");
36
37static int no_poweroff;
38module_param(no_poweroff, int, 0644);
39MODULE_PARM_DESC(no_poweroff, "0 (default) powers device off when not used.\n"
40 "\t\t1 keep device energized and with tuner ready all the times.\n"
41 "\t\tFaster, but consumes more power and keeps the device hotter");
42
43static DEFINE_MUTEX(xc5000_list_mutex);
44static LIST_HEAD(hybrid_tuner_instance_list);
45
46#define dprintk(level, fmt, arg...) if (debug >= level) \
47 printk(KERN_INFO "%s: " fmt, "xc5000", ## arg)
48
49struct xc5000_priv {
50 struct tuner_i2c_props i2c_props;
51 struct list_head hybrid_tuner_instance_list;
52
53 u32 if_khz;
54 u16 xtal_khz;
55 u32 freq_hz, freq_offset;
56 u32 bandwidth;
57 u8 video_standard;
58 unsigned int mode;
59 u8 rf_mode;
60 u8 radio_input;
61 u16 output_amp;
62
63 int chip_id;
64 u16 pll_register_no;
65 u8 init_status_supported;
66 u8 fw_checksum_supported;
67
68 struct dvb_frontend *fe;
69 struct delayed_work timer_sleep;
70
71 const struct firmware *firmware;
72};
73
74
75#define MAX_TV_STANDARD 24
76#define XC_MAX_I2C_WRITE_LENGTH 64
77
78
79#define XC5000_SLEEP_TIME 5000
80
81
82#define XC_RF_MODE_AIR 0
83#define XC_RF_MODE_CABLE 1
84
85
86#define XC_PRODUCT_ID_FW_NOT_LOADED 0x2000
87#define XC_PRODUCT_ID_FW_LOADED 0x1388
88
89
90#define XREG_INIT 0x00
91#define XREG_VIDEO_MODE 0x01
92#define XREG_AUDIO_MODE 0x02
93#define XREG_RF_FREQ 0x03
94#define XREG_D_CODE 0x04
95#define XREG_IF_OUT 0x05
96#define XREG_SEEK_MODE 0x07
97#define XREG_POWER_DOWN 0x0A
98
99#define XREG_OUTPUT_AMP 0x0B
100#define XREG_SIGNALSOURCE 0x0D
101#define XREG_SMOOTHEDCVBS 0x0E
102#define XREG_XTALFREQ 0x0F
103#define XREG_FINERFREQ 0x10
104#define XREG_DDIMODE 0x11
105
106#define XREG_ADC_ENV 0x00
107#define XREG_QUALITY 0x01
108#define XREG_FRAME_LINES 0x02
109#define XREG_HSYNC_FREQ 0x03
110#define XREG_LOCK 0x04
111#define XREG_FREQ_ERROR 0x05
112#define XREG_SNR 0x06
113#define XREG_VERSION 0x07
114#define XREG_PRODUCT_ID 0x08
115#define XREG_BUSY 0x09
116#define XREG_BUILD 0x0D
117#define XREG_TOTALGAIN 0x0F
118#define XREG_FW_CHECKSUM 0x12
119#define XREG_INIT_STATUS 0x13
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154struct XC_TV_STANDARD {
155 char *name;
156 u16 audio_mode;
157 u16 video_mode;
158};
159
160
161#define MN_NTSC_PAL_BTSC 0
162#define MN_NTSC_PAL_A2 1
163#define MN_NTSC_PAL_EIAJ 2
164#define MN_NTSC_PAL_MONO 3
165#define BG_PAL_A2 4
166#define BG_PAL_NICAM 5
167#define BG_PAL_MONO 6
168#define I_PAL_NICAM 7
169#define I_PAL_NICAM_MONO 8
170#define DK_PAL_A2 9
171#define DK_PAL_NICAM 10
172#define DK_PAL_MONO 11
173#define DK_SECAM_A2DK1 12
174#define DK_SECAM_A2LDK3 13
175#define DK_SECAM_A2MONO 14
176#define L_SECAM_NICAM 15
177#define LC_SECAM_NICAM 16
178#define DTV6 17
179#define DTV8 18
180#define DTV7_8 19
181#define DTV7 20
182#define FM_RADIO_INPUT2 21
183#define FM_RADIO_INPUT1 22
184#define FM_RADIO_INPUT1_MONO 23
185
186static struct XC_TV_STANDARD xc5000_standard[MAX_TV_STANDARD] = {
187 {"M/N-NTSC/PAL-BTSC", 0x0400, 0x8020},
188 {"M/N-NTSC/PAL-A2", 0x0600, 0x8020},
189 {"M/N-NTSC/PAL-EIAJ", 0x0440, 0x8020},
190 {"M/N-NTSC/PAL-Mono", 0x0478, 0x8020},
191 {"B/G-PAL-A2", 0x0A00, 0x8049},
192 {"B/G-PAL-NICAM", 0x0C04, 0x8049},
193 {"B/G-PAL-MONO", 0x0878, 0x8059},
194 {"I-PAL-NICAM", 0x1080, 0x8009},
195 {"I-PAL-NICAM-MONO", 0x0E78, 0x8009},
196 {"D/K-PAL-A2", 0x1600, 0x8009},
197 {"D/K-PAL-NICAM", 0x0E80, 0x8009},
198 {"D/K-PAL-MONO", 0x1478, 0x8009},
199 {"D/K-SECAM-A2 DK1", 0x1200, 0x8009},
200 {"D/K-SECAM-A2 L/DK3", 0x0E00, 0x8009},
201 {"D/K-SECAM-A2 MONO", 0x1478, 0x8009},
202 {"L-SECAM-NICAM", 0x8E82, 0x0009},
203 {"L'-SECAM-NICAM", 0x8E82, 0x4009},
204 {"DTV6", 0x00C0, 0x8002},
205 {"DTV8", 0x00C0, 0x800B},
206 {"DTV7/8", 0x00C0, 0x801B},
207 {"DTV7", 0x00C0, 0x8007},
208 {"FM Radio-INPUT2", 0x9802, 0x9002},
209 {"FM Radio-INPUT1", 0x0208, 0x9002},
210 {"FM Radio-INPUT1_MONO", 0x0278, 0x9002}
211};
212
213
214struct xc5000_fw_cfg {
215 char *name;
216 u16 size;
217 u16 pll_reg;
218 u8 init_status_supported;
219 u8 fw_checksum_supported;
220};
221
222#define XC5000A_FIRMWARE "dvb-fe-xc5000-1.6.114.fw"
223static const struct xc5000_fw_cfg xc5000a_1_6_114 = {
224 .name = XC5000A_FIRMWARE,
225 .size = 12401,
226 .pll_reg = 0x806c,
227};
228
229#define XC5000C_FIRMWARE "dvb-fe-xc5000c-4.1.30.7.fw"
230static const struct xc5000_fw_cfg xc5000c_41_024_5 = {
231 .name = XC5000C_FIRMWARE,
232 .size = 16497,
233 .pll_reg = 0x13,
234 .init_status_supported = 1,
235 .fw_checksum_supported = 1,
236};
237
238static inline const struct xc5000_fw_cfg *xc5000_assign_firmware(int chip_id)
239{
240 switch (chip_id) {
241 default:
242 case XC5000A:
243 return &xc5000a_1_6_114;
244 case XC5000C:
245 return &xc5000c_41_024_5;
246 }
247}
248
249static int xc_load_fw_and_init_tuner(struct dvb_frontend *fe, int force);
250static int xc5000_is_firmware_loaded(struct dvb_frontend *fe);
251static int xc5000_readreg(struct xc5000_priv *priv, u16 reg, u16 *val);
252static int xc5000_tuner_reset(struct dvb_frontend *fe);
253
254static int xc_send_i2c_data(struct xc5000_priv *priv, u8 *buf, int len)
255{
256 struct i2c_msg msg = { .addr = priv->i2c_props.addr,
257 .flags = 0, .buf = buf, .len = len };
258
259 if (i2c_transfer(priv->i2c_props.adap, &msg, 1) != 1) {
260 printk(KERN_ERR "xc5000: I2C write failed (len=%i)\n", len);
261 return -EREMOTEIO;
262 }
263 return 0;
264}
265
266#if 0
267
268
269
270static int xc_read_i2c_data(struct xc5000_priv *priv, u8 *buf, int len)
271{
272 struct i2c_msg msg = { .addr = priv->i2c_props.addr,
273 .flags = I2C_M_RD, .buf = buf, .len = len };
274
275 if (i2c_transfer(priv->i2c_props.adap, &msg, 1) != 1) {
276 printk(KERN_ERR "xc5000 I2C read failed (len=%i)\n", len);
277 return -EREMOTEIO;
278 }
279 return 0;
280}
281#endif
282
283static int xc5000_readreg(struct xc5000_priv *priv, u16 reg, u16 *val)
284{
285 u8 buf[2] = { reg >> 8, reg & 0xff };
286 u8 bval[2] = { 0, 0 };
287 struct i2c_msg msg[2] = {
288 { .addr = priv->i2c_props.addr,
289 .flags = 0, .buf = &buf[0], .len = 2 },
290 { .addr = priv->i2c_props.addr,
291 .flags = I2C_M_RD, .buf = &bval[0], .len = 2 },
292 };
293
294 if (i2c_transfer(priv->i2c_props.adap, msg, 2) != 2) {
295 printk(KERN_WARNING "xc5000: I2C read failed\n");
296 return -EREMOTEIO;
297 }
298
299 *val = (bval[0] << 8) | bval[1];
300 return 0;
301}
302
303static int xc5000_tuner_reset(struct dvb_frontend *fe)
304{
305 struct xc5000_priv *priv = fe->tuner_priv;
306 int ret;
307
308 dprintk(1, "%s()\n", __func__);
309
310 if (fe->callback) {
311 ret = fe->callback(((fe->dvb) && (fe->dvb->priv)) ?
312 fe->dvb->priv :
313 priv->i2c_props.adap->algo_data,
314 DVB_FRONTEND_COMPONENT_TUNER,
315 XC5000_TUNER_RESET, 0);
316 if (ret) {
317 printk(KERN_ERR "xc5000: reset failed\n");
318 return ret;
319 }
320 } else {
321 printk(KERN_ERR "xc5000: no tuner reset callback function, fatal\n");
322 return -EINVAL;
323 }
324 return 0;
325}
326
327static int xc_write_reg(struct xc5000_priv *priv, u16 reg_addr, u16 i2c_data)
328{
329 u8 buf[4];
330 int watch_dog_timer = 100;
331 int result;
332
333 buf[0] = (reg_addr >> 8) & 0xFF;
334 buf[1] = reg_addr & 0xFF;
335 buf[2] = (i2c_data >> 8) & 0xFF;
336 buf[3] = i2c_data & 0xFF;
337 result = xc_send_i2c_data(priv, buf, 4);
338 if (result == 0) {
339
340 while ((watch_dog_timer > 0) && (result == 0)) {
341 result = xc5000_readreg(priv, XREG_BUSY, (u16 *)buf);
342 if (result == 0) {
343 if ((buf[0] == 0) && (buf[1] == 0)) {
344
345 break;
346 } else {
347 msleep(5);
348 watch_dog_timer--;
349 }
350 }
351 }
352 }
353 if (watch_dog_timer <= 0)
354 result = -EREMOTEIO;
355
356 return result;
357}
358
359static int xc_load_i2c_sequence(struct dvb_frontend *fe, const u8 *i2c_sequence)
360{
361 struct xc5000_priv *priv = fe->tuner_priv;
362
363 int i, nbytes_to_send, result;
364 unsigned int len, pos, index;
365 u8 buf[XC_MAX_I2C_WRITE_LENGTH];
366
367 index = 0;
368 while ((i2c_sequence[index] != 0xFF) ||
369 (i2c_sequence[index + 1] != 0xFF)) {
370 len = i2c_sequence[index] * 256 + i2c_sequence[index+1];
371 if (len == 0x0000) {
372
373 result = xc5000_tuner_reset(fe);
374 index += 2;
375 if (result != 0)
376 return result;
377 } else if (len & 0x8000) {
378
379 msleep(len & 0x7FFF);
380 index += 2;
381 } else {
382
383
384
385 index += 2;
386 buf[0] = i2c_sequence[index];
387 buf[1] = i2c_sequence[index + 1];
388 pos = 2;
389 while (pos < len) {
390 if ((len - pos) > XC_MAX_I2C_WRITE_LENGTH - 2)
391 nbytes_to_send =
392 XC_MAX_I2C_WRITE_LENGTH;
393 else
394 nbytes_to_send = (len - pos + 2);
395 for (i = 2; i < nbytes_to_send; i++) {
396 buf[i] = i2c_sequence[index + pos +
397 i - 2];
398 }
399 result = xc_send_i2c_data(priv, buf,
400 nbytes_to_send);
401
402 if (result != 0)
403 return result;
404
405 pos += nbytes_to_send - 2;
406 }
407 index += len;
408 }
409 }
410 return 0;
411}
412
413static int xc_initialize(struct xc5000_priv *priv)
414{
415 dprintk(1, "%s()\n", __func__);
416 return xc_write_reg(priv, XREG_INIT, 0);
417}
418
419static int xc_set_tv_standard(struct xc5000_priv *priv,
420 u16 video_mode, u16 audio_mode, u8 radio_mode)
421{
422 int ret;
423 dprintk(1, "%s(0x%04x,0x%04x)\n", __func__, video_mode, audio_mode);
424 if (radio_mode) {
425 dprintk(1, "%s() Standard = %s\n",
426 __func__,
427 xc5000_standard[radio_mode].name);
428 } else {
429 dprintk(1, "%s() Standard = %s\n",
430 __func__,
431 xc5000_standard[priv->video_standard].name);
432 }
433
434 ret = xc_write_reg(priv, XREG_VIDEO_MODE, video_mode);
435 if (ret == 0)
436 ret = xc_write_reg(priv, XREG_AUDIO_MODE, audio_mode);
437
438 return ret;
439}
440
441static int xc_set_signal_source(struct xc5000_priv *priv, u16 rf_mode)
442{
443 dprintk(1, "%s(%d) Source = %s\n", __func__, rf_mode,
444 rf_mode == XC_RF_MODE_AIR ? "ANTENNA" : "CABLE");
445
446 if ((rf_mode != XC_RF_MODE_AIR) && (rf_mode != XC_RF_MODE_CABLE)) {
447 rf_mode = XC_RF_MODE_CABLE;
448 printk(KERN_ERR
449 "%s(), Invalid mode, defaulting to CABLE",
450 __func__);
451 }
452 return xc_write_reg(priv, XREG_SIGNALSOURCE, rf_mode);
453}
454
455static const struct dvb_tuner_ops xc5000_tuner_ops;
456
457static int xc_set_rf_frequency(struct xc5000_priv *priv, u32 freq_hz)
458{
459 u16 freq_code;
460
461 dprintk(1, "%s(%u)\n", __func__, freq_hz);
462
463 if ((freq_hz > xc5000_tuner_ops.info.frequency_max) ||
464 (freq_hz < xc5000_tuner_ops.info.frequency_min))
465 return -EINVAL;
466
467 freq_code = (u16)(freq_hz / 15625);
468
469
470
471
472 return xc_write_reg(priv, XREG_FINERFREQ, freq_code);
473}
474
475
476static int xc_set_IF_frequency(struct xc5000_priv *priv, u32 freq_khz)
477{
478 u32 freq_code = (freq_khz * 1024)/1000;
479 dprintk(1, "%s(freq_khz = %d) freq_code = 0x%x\n",
480 __func__, freq_khz, freq_code);
481
482 return xc_write_reg(priv, XREG_IF_OUT, freq_code);
483}
484
485
486static int xc_get_adc_envelope(struct xc5000_priv *priv, u16 *adc_envelope)
487{
488 return xc5000_readreg(priv, XREG_ADC_ENV, adc_envelope);
489}
490
491static int xc_get_frequency_error(struct xc5000_priv *priv, u32 *freq_error_hz)
492{
493 int result;
494 u16 reg_data;
495 u32 tmp;
496
497 result = xc5000_readreg(priv, XREG_FREQ_ERROR, ®_data);
498 if (result != 0)
499 return result;
500
501 tmp = (u32)reg_data;
502 (*freq_error_hz) = (tmp * 15625) / 1000;
503 return result;
504}
505
506static int xc_get_lock_status(struct xc5000_priv *priv, u16 *lock_status)
507{
508 return xc5000_readreg(priv, XREG_LOCK, lock_status);
509}
510
511static int xc_get_version(struct xc5000_priv *priv,
512 u8 *hw_majorversion, u8 *hw_minorversion,
513 u8 *fw_majorversion, u8 *fw_minorversion)
514{
515 u16 data;
516 int result;
517
518 result = xc5000_readreg(priv, XREG_VERSION, &data);
519 if (result != 0)
520 return result;
521
522 (*hw_majorversion) = (data >> 12) & 0x0F;
523 (*hw_minorversion) = (data >> 8) & 0x0F;
524 (*fw_majorversion) = (data >> 4) & 0x0F;
525 (*fw_minorversion) = data & 0x0F;
526
527 return 0;
528}
529
530static int xc_get_buildversion(struct xc5000_priv *priv, u16 *buildrev)
531{
532 return xc5000_readreg(priv, XREG_BUILD, buildrev);
533}
534
535static int xc_get_hsync_freq(struct xc5000_priv *priv, u32 *hsync_freq_hz)
536{
537 u16 reg_data;
538 int result;
539
540 result = xc5000_readreg(priv, XREG_HSYNC_FREQ, ®_data);
541 if (result != 0)
542 return result;
543
544 (*hsync_freq_hz) = ((reg_data & 0x0fff) * 763)/100;
545 return result;
546}
547
548static int xc_get_frame_lines(struct xc5000_priv *priv, u16 *frame_lines)
549{
550 return xc5000_readreg(priv, XREG_FRAME_LINES, frame_lines);
551}
552
553static int xc_get_quality(struct xc5000_priv *priv, u16 *quality)
554{
555 return xc5000_readreg(priv, XREG_QUALITY, quality);
556}
557
558static int xc_get_analogsnr(struct xc5000_priv *priv, u16 *snr)
559{
560 return xc5000_readreg(priv, XREG_SNR, snr);
561}
562
563static int xc_get_totalgain(struct xc5000_priv *priv, u16 *totalgain)
564{
565 return xc5000_readreg(priv, XREG_TOTALGAIN, totalgain);
566}
567
568#define XC_TUNE_ANALOG 0
569#define XC_TUNE_DIGITAL 1
570static int xc_tune_channel(struct xc5000_priv *priv, u32 freq_hz, int mode)
571{
572 dprintk(1, "%s(%u)\n", __func__, freq_hz);
573
574 if (xc_set_rf_frequency(priv, freq_hz) != 0)
575 return -EREMOTEIO;
576
577 return 0;
578}
579
580static int xc_set_xtal(struct dvb_frontend *fe)
581{
582 struct xc5000_priv *priv = fe->tuner_priv;
583 int ret = 0;
584
585 switch (priv->chip_id) {
586 default:
587 case XC5000A:
588
589 break;
590 case XC5000C:
591 switch (priv->xtal_khz) {
592 default:
593 case 32000:
594
595 break;
596 case 31875:
597
598 ret = xc_write_reg(priv, 0x000f, 0x8081);
599 break;
600 }
601 break;
602 }
603 return ret;
604}
605
606static int xc5000_fwupload(struct dvb_frontend *fe,
607 const struct xc5000_fw_cfg *desired_fw,
608 const struct firmware *fw)
609{
610 struct xc5000_priv *priv = fe->tuner_priv;
611 int ret;
612
613
614 dprintk(1, "waiting for firmware upload (%s)...\n",
615 desired_fw->name);
616
617 priv->pll_register_no = desired_fw->pll_reg;
618 priv->init_status_supported = desired_fw->init_status_supported;
619 priv->fw_checksum_supported = desired_fw->fw_checksum_supported;
620
621
622 dprintk(1, "firmware uploading...\n");
623 ret = xc_load_i2c_sequence(fe, fw->data);
624 if (!ret) {
625 ret = xc_set_xtal(fe);
626 dprintk(1, "Firmware upload complete...\n");
627 } else
628 printk(KERN_ERR "xc5000: firmware upload failed...\n");
629
630 return ret;
631}
632
633static void xc_debug_dump(struct xc5000_priv *priv)
634{
635 u16 adc_envelope;
636 u32 freq_error_hz = 0;
637 u16 lock_status;
638 u32 hsync_freq_hz = 0;
639 u16 frame_lines;
640 u16 quality;
641 u16 snr;
642 u16 totalgain;
643 u8 hw_majorversion = 0, hw_minorversion = 0;
644 u8 fw_majorversion = 0, fw_minorversion = 0;
645 u16 fw_buildversion = 0;
646 u16 regval;
647
648
649
650
651
652 msleep(100);
653
654 xc_get_adc_envelope(priv, &adc_envelope);
655 dprintk(1, "*** ADC envelope (0-1023) = %d\n", adc_envelope);
656
657 xc_get_frequency_error(priv, &freq_error_hz);
658 dprintk(1, "*** Frequency error = %d Hz\n", freq_error_hz);
659
660 xc_get_lock_status(priv, &lock_status);
661 dprintk(1, "*** Lock status (0-Wait, 1-Locked, 2-No-signal) = %d\n",
662 lock_status);
663
664 xc_get_version(priv, &hw_majorversion, &hw_minorversion,
665 &fw_majorversion, &fw_minorversion);
666 xc_get_buildversion(priv, &fw_buildversion);
667 dprintk(1, "*** HW: V%d.%d, FW: V %d.%d.%d\n",
668 hw_majorversion, hw_minorversion,
669 fw_majorversion, fw_minorversion, fw_buildversion);
670
671 xc_get_hsync_freq(priv, &hsync_freq_hz);
672 dprintk(1, "*** Horizontal sync frequency = %d Hz\n", hsync_freq_hz);
673
674 xc_get_frame_lines(priv, &frame_lines);
675 dprintk(1, "*** Frame lines = %d\n", frame_lines);
676
677 xc_get_quality(priv, &quality);
678 dprintk(1, "*** Quality (0:<8dB, 7:>56dB) = %d\n", quality & 0x07);
679
680 xc_get_analogsnr(priv, &snr);
681 dprintk(1, "*** Unweighted analog SNR = %d dB\n", snr & 0x3f);
682
683 xc_get_totalgain(priv, &totalgain);
684 dprintk(1, "*** Total gain = %d.%d dB\n", totalgain / 256,
685 (totalgain % 256) * 100 / 256);
686
687 if (priv->pll_register_no) {
688 if (!xc5000_readreg(priv, priv->pll_register_no, ®val))
689 dprintk(1, "*** PLL lock status = 0x%04x\n", regval);
690 }
691}
692
693static int xc5000_tune_digital(struct dvb_frontend *fe)
694{
695 struct xc5000_priv *priv = fe->tuner_priv;
696 int ret;
697 u32 bw = fe->dtv_property_cache.bandwidth_hz;
698
699 ret = xc_set_signal_source(priv, priv->rf_mode);
700 if (ret != 0) {
701 printk(KERN_ERR
702 "xc5000: xc_set_signal_source(%d) failed\n",
703 priv->rf_mode);
704 return -EREMOTEIO;
705 }
706
707 ret = xc_set_tv_standard(priv,
708 xc5000_standard[priv->video_standard].video_mode,
709 xc5000_standard[priv->video_standard].audio_mode, 0);
710 if (ret != 0) {
711 printk(KERN_ERR "xc5000: xc_set_tv_standard failed\n");
712 return -EREMOTEIO;
713 }
714
715 ret = xc_set_IF_frequency(priv, priv->if_khz);
716 if (ret != 0) {
717 printk(KERN_ERR "xc5000: xc_Set_IF_frequency(%d) failed\n",
718 priv->if_khz);
719 return -EIO;
720 }
721
722 dprintk(1, "%s() setting OUTPUT_AMP to 0x%x\n",
723 __func__, priv->output_amp);
724 xc_write_reg(priv, XREG_OUTPUT_AMP, priv->output_amp);
725
726 xc_tune_channel(priv, priv->freq_hz, XC_TUNE_DIGITAL);
727
728 if (debug)
729 xc_debug_dump(priv);
730
731 priv->bandwidth = bw;
732
733 return 0;
734}
735
736static int xc5000_set_digital_params(struct dvb_frontend *fe)
737{
738 int b;
739 struct xc5000_priv *priv = fe->tuner_priv;
740 u32 bw = fe->dtv_property_cache.bandwidth_hz;
741 u32 freq = fe->dtv_property_cache.frequency;
742 u32 delsys = fe->dtv_property_cache.delivery_system;
743
744 if (xc_load_fw_and_init_tuner(fe, 0) != 0) {
745 dprintk(1, "Unable to load firmware and init tuner\n");
746 return -EINVAL;
747 }
748
749 dprintk(1, "%s() frequency=%d (Hz)\n", __func__, freq);
750
751 switch (delsys) {
752 case SYS_ATSC:
753 dprintk(1, "%s() VSB modulation\n", __func__);
754 priv->rf_mode = XC_RF_MODE_AIR;
755 priv->freq_offset = 1750000;
756 priv->video_standard = DTV6;
757 break;
758 case SYS_DVBC_ANNEX_B:
759 dprintk(1, "%s() QAM modulation\n", __func__);
760 priv->rf_mode = XC_RF_MODE_CABLE;
761 priv->freq_offset = 1750000;
762 priv->video_standard = DTV6;
763 break;
764 case SYS_ISDBT:
765
766 if (!bw)
767 bw = 6000000;
768
769
770 case SYS_DMBTH:
771 case SYS_DVBT:
772 case SYS_DVBT2:
773 dprintk(1, "%s() OFDM\n", __func__);
774 switch (bw) {
775 case 6000000:
776 priv->video_standard = DTV6;
777 priv->freq_offset = 1750000;
778 break;
779 case 7000000:
780 priv->video_standard = DTV7;
781 priv->freq_offset = 2250000;
782 break;
783 case 8000000:
784 priv->video_standard = DTV8;
785 priv->freq_offset = 2750000;
786 break;
787 default:
788 printk(KERN_ERR "xc5000 bandwidth not set!\n");
789 return -EINVAL;
790 }
791 priv->rf_mode = XC_RF_MODE_AIR;
792 break;
793 case SYS_DVBC_ANNEX_A:
794 case SYS_DVBC_ANNEX_C:
795 dprintk(1, "%s() QAM modulation\n", __func__);
796 priv->rf_mode = XC_RF_MODE_CABLE;
797 if (bw <= 6000000) {
798 priv->video_standard = DTV6;
799 priv->freq_offset = 1750000;
800 b = 6;
801 } else if (bw <= 7000000) {
802 priv->video_standard = DTV7;
803 priv->freq_offset = 2250000;
804 b = 7;
805 } else {
806 priv->video_standard = DTV7_8;
807 priv->freq_offset = 2750000;
808 b = 8;
809 }
810 dprintk(1, "%s() Bandwidth %dMHz (%d)\n", __func__,
811 b, bw);
812 break;
813 default:
814 printk(KERN_ERR "xc5000: delivery system is not supported!\n");
815 return -EINVAL;
816 }
817
818 priv->freq_hz = freq - priv->freq_offset;
819 priv->mode = V4L2_TUNER_DIGITAL_TV;
820
821 dprintk(1, "%s() frequency=%d (compensated to %d)\n",
822 __func__, freq, priv->freq_hz);
823
824 return xc5000_tune_digital(fe);
825}
826
827static int xc5000_is_firmware_loaded(struct dvb_frontend *fe)
828{
829 struct xc5000_priv *priv = fe->tuner_priv;
830 int ret;
831 u16 id;
832
833 ret = xc5000_readreg(priv, XREG_PRODUCT_ID, &id);
834 if (!ret) {
835 if (id == XC_PRODUCT_ID_FW_NOT_LOADED)
836 ret = -ENOENT;
837 else
838 ret = 0;
839 dprintk(1, "%s() returns id = 0x%x\n", __func__, id);
840 } else {
841 dprintk(1, "%s() returns error %d\n", __func__, ret);
842 }
843
844 return ret;
845}
846
847static void xc5000_config_tv(struct dvb_frontend *fe,
848 struct analog_parameters *params)
849{
850 struct xc5000_priv *priv = fe->tuner_priv;
851
852 dprintk(1, "%s() frequency=%d (in units of 62.5khz)\n",
853 __func__, params->frequency);
854
855
856 priv->rf_mode = params->mode;
857 if (params->mode > XC_RF_MODE_CABLE)
858 priv->rf_mode = XC_RF_MODE_CABLE;
859
860
861 priv->freq_hz = params->frequency * 62500;
862
863
864
865
866 if (params->std & V4L2_STD_MN) {
867
868 priv->video_standard = MN_NTSC_PAL_BTSC;
869 return;
870 }
871
872 if (params->std & V4L2_STD_PAL_BG) {
873
874 priv->video_standard = BG_PAL_NICAM;
875 return;
876 }
877
878 if (params->std & V4L2_STD_PAL_I) {
879
880 priv->video_standard = I_PAL_NICAM;
881 return;
882 }
883
884 if (params->std & V4L2_STD_PAL_DK) {
885
886 priv->video_standard = DK_PAL_NICAM;
887 return;
888 }
889
890 if (params->std & V4L2_STD_SECAM_DK) {
891
892 priv->video_standard = DK_SECAM_A2DK1;
893 return;
894 }
895
896 if (params->std & V4L2_STD_SECAM_L) {
897 priv->video_standard = L_SECAM_NICAM;
898 return;
899 }
900
901 if (params->std & V4L2_STD_SECAM_LC) {
902 priv->video_standard = LC_SECAM_NICAM;
903 return;
904 }
905}
906
907static int xc5000_set_tv_freq(struct dvb_frontend *fe)
908{
909 struct xc5000_priv *priv = fe->tuner_priv;
910 u16 pll_lock_status;
911 int ret;
912
913tune_channel:
914 ret = xc_set_signal_source(priv, priv->rf_mode);
915 if (ret != 0) {
916 printk(KERN_ERR
917 "xc5000: xc_set_signal_source(%d) failed\n",
918 priv->rf_mode);
919 return -EREMOTEIO;
920 }
921
922 ret = xc_set_tv_standard(priv,
923 xc5000_standard[priv->video_standard].video_mode,
924 xc5000_standard[priv->video_standard].audio_mode, 0);
925 if (ret != 0) {
926 printk(KERN_ERR "xc5000: xc_set_tv_standard failed\n");
927 return -EREMOTEIO;
928 }
929
930 xc_write_reg(priv, XREG_OUTPUT_AMP, 0x09);
931
932 xc_tune_channel(priv, priv->freq_hz, XC_TUNE_ANALOG);
933
934 if (debug)
935 xc_debug_dump(priv);
936
937 if (priv->pll_register_no != 0) {
938 msleep(20);
939 ret = xc5000_readreg(priv, priv->pll_register_no,
940 &pll_lock_status);
941 if (ret)
942 return ret;
943 if (pll_lock_status > 63) {
944
945 dprintk(1, "xc5000: PLL not locked (0x%x). Reloading...\n",
946 pll_lock_status);
947 if (xc_load_fw_and_init_tuner(fe, 1) != 0) {
948 printk(KERN_ERR "xc5000: Unable to reload fw\n");
949 return -EREMOTEIO;
950 }
951 goto tune_channel;
952 }
953 }
954
955 return 0;
956}
957
958static int xc5000_config_radio(struct dvb_frontend *fe,
959 struct analog_parameters *params)
960
961{
962 struct xc5000_priv *priv = fe->tuner_priv;
963
964 dprintk(1, "%s() frequency=%d (in units of khz)\n",
965 __func__, params->frequency);
966
967 if (priv->radio_input == XC5000_RADIO_NOT_CONFIGURED) {
968 dprintk(1, "%s() radio input not configured\n", __func__);
969 return -EINVAL;
970 }
971
972 priv->freq_hz = params->frequency * 125 / 2;
973 priv->rf_mode = XC_RF_MODE_AIR;
974
975 return 0;
976}
977
978static int xc5000_set_radio_freq(struct dvb_frontend *fe)
979{
980 struct xc5000_priv *priv = fe->tuner_priv;
981 int ret;
982 u8 radio_input;
983
984 if (priv->radio_input == XC5000_RADIO_FM1)
985 radio_input = FM_RADIO_INPUT1;
986 else if (priv->radio_input == XC5000_RADIO_FM2)
987 radio_input = FM_RADIO_INPUT2;
988 else if (priv->radio_input == XC5000_RADIO_FM1_MONO)
989 radio_input = FM_RADIO_INPUT1_MONO;
990 else {
991 dprintk(1, "%s() unknown radio input %d\n", __func__,
992 priv->radio_input);
993 return -EINVAL;
994 }
995
996 ret = xc_set_tv_standard(priv, xc5000_standard[radio_input].video_mode,
997 xc5000_standard[radio_input].audio_mode, radio_input);
998
999 if (ret != 0) {
1000 printk(KERN_ERR "xc5000: xc_set_tv_standard failed\n");
1001 return -EREMOTEIO;
1002 }
1003
1004 ret = xc_set_signal_source(priv, priv->rf_mode);
1005 if (ret != 0) {
1006 printk(KERN_ERR
1007 "xc5000: xc_set_signal_source(%d) failed\n",
1008 priv->rf_mode);
1009 return -EREMOTEIO;
1010 }
1011
1012 if ((priv->radio_input == XC5000_RADIO_FM1) ||
1013 (priv->radio_input == XC5000_RADIO_FM2))
1014 xc_write_reg(priv, XREG_OUTPUT_AMP, 0x09);
1015 else if (priv->radio_input == XC5000_RADIO_FM1_MONO)
1016 xc_write_reg(priv, XREG_OUTPUT_AMP, 0x06);
1017
1018 xc_tune_channel(priv, priv->freq_hz, XC_TUNE_ANALOG);
1019
1020 return 0;
1021}
1022
1023static int xc5000_set_params(struct dvb_frontend *fe)
1024{
1025 struct xc5000_priv *priv = fe->tuner_priv;
1026
1027 if (xc_load_fw_and_init_tuner(fe, 0) != 0) {
1028 dprintk(1, "Unable to load firmware and init tuner\n");
1029 return -EINVAL;
1030 }
1031
1032 switch (priv->mode) {
1033 case V4L2_TUNER_RADIO:
1034 return xc5000_set_radio_freq(fe);
1035 case V4L2_TUNER_ANALOG_TV:
1036 return xc5000_set_tv_freq(fe);
1037 case V4L2_TUNER_DIGITAL_TV:
1038 return xc5000_tune_digital(fe);
1039 }
1040
1041 return 0;
1042}
1043
1044static int xc5000_set_analog_params(struct dvb_frontend *fe,
1045 struct analog_parameters *params)
1046{
1047 struct xc5000_priv *priv = fe->tuner_priv;
1048 int ret;
1049
1050 if (priv->i2c_props.adap == NULL)
1051 return -EINVAL;
1052
1053 switch (params->mode) {
1054 case V4L2_TUNER_RADIO:
1055 ret = xc5000_config_radio(fe, params);
1056 if (ret)
1057 return ret;
1058 break;
1059 case V4L2_TUNER_ANALOG_TV:
1060 xc5000_config_tv(fe, params);
1061 break;
1062 default:
1063 break;
1064 }
1065 priv->mode = params->mode;
1066
1067 return xc5000_set_params(fe);
1068}
1069
1070static int xc5000_get_frequency(struct dvb_frontend *fe, u32 *freq)
1071{
1072 struct xc5000_priv *priv = fe->tuner_priv;
1073 dprintk(1, "%s()\n", __func__);
1074 *freq = priv->freq_hz + priv->freq_offset;
1075 return 0;
1076}
1077
1078static int xc5000_get_if_frequency(struct dvb_frontend *fe, u32 *freq)
1079{
1080 struct xc5000_priv *priv = fe->tuner_priv;
1081 dprintk(1, "%s()\n", __func__);
1082 *freq = priv->if_khz * 1000;
1083 return 0;
1084}
1085
1086static int xc5000_get_bandwidth(struct dvb_frontend *fe, u32 *bw)
1087{
1088 struct xc5000_priv *priv = fe->tuner_priv;
1089 dprintk(1, "%s()\n", __func__);
1090
1091 *bw = priv->bandwidth;
1092 return 0;
1093}
1094
1095static int xc5000_get_status(struct dvb_frontend *fe, u32 *status)
1096{
1097 struct xc5000_priv *priv = fe->tuner_priv;
1098 u16 lock_status = 0;
1099
1100 xc_get_lock_status(priv, &lock_status);
1101
1102 dprintk(1, "%s() lock_status = 0x%08x\n", __func__, lock_status);
1103
1104 *status = lock_status;
1105
1106 return 0;
1107}
1108
1109static int xc_load_fw_and_init_tuner(struct dvb_frontend *fe, int force)
1110{
1111 struct xc5000_priv *priv = fe->tuner_priv;
1112 const struct xc5000_fw_cfg *desired_fw = xc5000_assign_firmware(priv->chip_id);
1113 const struct firmware *fw;
1114 int ret, i;
1115 u16 pll_lock_status;
1116 u16 fw_ck;
1117
1118 cancel_delayed_work(&priv->timer_sleep);
1119
1120 if (!force && xc5000_is_firmware_loaded(fe) == 0)
1121 return 0;
1122
1123 if (!priv->firmware) {
1124 ret = request_firmware(&fw, desired_fw->name,
1125 priv->i2c_props.adap->dev.parent);
1126 if (ret) {
1127 pr_err("xc5000: Upload failed. rc %d\n", ret);
1128 return ret;
1129 }
1130 dprintk(1, "firmware read %zu bytes.\n", fw->size);
1131
1132 if (fw->size != desired_fw->size) {
1133 pr_err("xc5000: Firmware file with incorrect size\n");
1134 release_firmware(fw);
1135 return -EINVAL;
1136 }
1137 priv->firmware = fw;
1138 } else
1139 fw = priv->firmware;
1140
1141
1142 for (i = 0; i < 5; i++) {
1143 if (i)
1144 printk(KERN_CONT " - retrying to upload firmware.\n");
1145
1146 ret = xc5000_fwupload(fe, desired_fw, fw);
1147 if (ret != 0)
1148 goto err;
1149
1150 msleep(20);
1151
1152 if (priv->fw_checksum_supported) {
1153 if (xc5000_readreg(priv, XREG_FW_CHECKSUM, &fw_ck)) {
1154 printk(KERN_ERR
1155 "xc5000: FW checksum reading failed.");
1156 continue;
1157 }
1158
1159 if (!fw_ck) {
1160 printk(KERN_ERR
1161 "xc5000: FW checksum failed = 0x%04x.",
1162 fw_ck);
1163 continue;
1164 }
1165 }
1166
1167
1168 ret = xc_initialize(priv);
1169 if (ret) {
1170 printk(KERN_ERR "xc5000: Can't request self-calibration.");
1171 continue;
1172 }
1173
1174
1175
1176
1177
1178
1179 msleep(100);
1180
1181 if (priv->init_status_supported) {
1182 if (xc5000_readreg(priv, XREG_INIT_STATUS, &fw_ck)) {
1183 printk(KERN_ERR
1184 "xc5000: FW failed reading init status.");
1185 continue;
1186 }
1187
1188 if (!fw_ck) {
1189 printk(KERN_ERR
1190 "xc5000: FW init status failed = 0x%04x.",
1191 fw_ck);
1192 continue;
1193 }
1194 }
1195
1196 if (priv->pll_register_no) {
1197 ret = xc5000_readreg(priv, priv->pll_register_no,
1198 &pll_lock_status);
1199 if (ret)
1200 continue;
1201 if (pll_lock_status > 63) {
1202
1203 printk(KERN_ERR
1204 "xc5000: PLL not running after fwload.");
1205 continue;
1206 }
1207 }
1208
1209
1210 ret = xc_write_reg(priv, XREG_SIGNALSOURCE, XC_RF_MODE_CABLE);
1211 if (!ret)
1212 break;
1213 printk(KERN_ERR "xc5000: can't set to cable mode.");
1214 }
1215
1216err:
1217 if (!ret)
1218 printk(KERN_INFO "xc5000: Firmware %s loaded and running.\n",
1219 desired_fw->name);
1220 else
1221 printk(KERN_CONT " - too many retries. Giving up\n");
1222
1223 return ret;
1224}
1225
1226static void xc5000_do_timer_sleep(struct work_struct *timer_sleep)
1227{
1228 struct xc5000_priv *priv =container_of(timer_sleep, struct xc5000_priv,
1229 timer_sleep.work);
1230 struct dvb_frontend *fe = priv->fe;
1231 int ret;
1232
1233 dprintk(1, "%s()\n", __func__);
1234
1235
1236
1237
1238 ret = xc5000_tuner_reset(fe);
1239 if (ret != 0)
1240 printk(KERN_ERR
1241 "xc5000: %s() unable to shutdown tuner\n",
1242 __func__);
1243}
1244
1245static int xc5000_sleep(struct dvb_frontend *fe)
1246{
1247 struct xc5000_priv *priv = fe->tuner_priv;
1248
1249 dprintk(1, "%s()\n", __func__);
1250
1251
1252 if (no_poweroff)
1253 return 0;
1254
1255 schedule_delayed_work(&priv->timer_sleep,
1256 msecs_to_jiffies(XC5000_SLEEP_TIME));
1257
1258 return 0;
1259}
1260
1261static int xc5000_suspend(struct dvb_frontend *fe)
1262{
1263 struct xc5000_priv *priv = fe->tuner_priv;
1264 int ret;
1265
1266 dprintk(1, "%s()\n", __func__);
1267
1268 cancel_delayed_work(&priv->timer_sleep);
1269
1270 ret = xc5000_tuner_reset(fe);
1271 if (ret != 0)
1272 printk(KERN_ERR
1273 "xc5000: %s() unable to shutdown tuner\n",
1274 __func__);
1275
1276 return 0;
1277}
1278
1279static int xc5000_resume(struct dvb_frontend *fe)
1280{
1281 struct xc5000_priv *priv = fe->tuner_priv;
1282
1283 dprintk(1, "%s()\n", __func__);
1284
1285
1286
1287 if (!priv->firmware)
1288 return 0;
1289
1290 return xc5000_set_params(fe);
1291}
1292
1293static int xc5000_init(struct dvb_frontend *fe)
1294{
1295 struct xc5000_priv *priv = fe->tuner_priv;
1296 dprintk(1, "%s()\n", __func__);
1297
1298 if (xc_load_fw_and_init_tuner(fe, 0) != 0) {
1299 printk(KERN_ERR "xc5000: Unable to initialise tuner\n");
1300 return -EREMOTEIO;
1301 }
1302
1303 if (debug)
1304 xc_debug_dump(priv);
1305
1306 return 0;
1307}
1308
1309static void xc5000_release(struct dvb_frontend *fe)
1310{
1311 struct xc5000_priv *priv = fe->tuner_priv;
1312
1313 dprintk(1, "%s()\n", __func__);
1314
1315 mutex_lock(&xc5000_list_mutex);
1316
1317 if (priv) {
1318 cancel_delayed_work(&priv->timer_sleep);
1319 if (priv->firmware) {
1320 release_firmware(priv->firmware);
1321 priv->firmware = NULL;
1322 }
1323 hybrid_tuner_release_state(priv);
1324 }
1325
1326 mutex_unlock(&xc5000_list_mutex);
1327
1328 fe->tuner_priv = NULL;
1329}
1330
1331static int xc5000_set_config(struct dvb_frontend *fe, void *priv_cfg)
1332{
1333 struct xc5000_priv *priv = fe->tuner_priv;
1334 struct xc5000_config *p = priv_cfg;
1335
1336 dprintk(1, "%s()\n", __func__);
1337
1338 if (p->if_khz)
1339 priv->if_khz = p->if_khz;
1340
1341 if (p->radio_input)
1342 priv->radio_input = p->radio_input;
1343
1344 if (p->output_amp)
1345 priv->output_amp = p->output_amp;
1346
1347 return 0;
1348}
1349
1350
1351static const struct dvb_tuner_ops xc5000_tuner_ops = {
1352 .info = {
1353 .name = "Xceive XC5000",
1354 .frequency_min = 1000000,
1355 .frequency_max = 1023000000,
1356 .frequency_step = 50000,
1357 },
1358
1359 .release = xc5000_release,
1360 .init = xc5000_init,
1361 .sleep = xc5000_sleep,
1362 .suspend = xc5000_suspend,
1363 .resume = xc5000_resume,
1364
1365 .set_config = xc5000_set_config,
1366 .set_params = xc5000_set_digital_params,
1367 .set_analog_params = xc5000_set_analog_params,
1368 .get_frequency = xc5000_get_frequency,
1369 .get_if_frequency = xc5000_get_if_frequency,
1370 .get_bandwidth = xc5000_get_bandwidth,
1371 .get_status = xc5000_get_status
1372};
1373
1374struct dvb_frontend *xc5000_attach(struct dvb_frontend *fe,
1375 struct i2c_adapter *i2c,
1376 const struct xc5000_config *cfg)
1377{
1378 struct xc5000_priv *priv = NULL;
1379 int instance;
1380 u16 id = 0;
1381
1382 dprintk(1, "%s(%d-%04x)\n", __func__,
1383 i2c ? i2c_adapter_id(i2c) : -1,
1384 cfg ? cfg->i2c_address : -1);
1385
1386 mutex_lock(&xc5000_list_mutex);
1387
1388 instance = hybrid_tuner_request_state(struct xc5000_priv, priv,
1389 hybrid_tuner_instance_list,
1390 i2c, cfg->i2c_address, "xc5000");
1391 switch (instance) {
1392 case 0:
1393 goto fail;
1394 case 1:
1395
1396 priv->bandwidth = 6000000;
1397 fe->tuner_priv = priv;
1398 priv->fe = fe;
1399 INIT_DELAYED_WORK(&priv->timer_sleep, xc5000_do_timer_sleep);
1400 break;
1401 default:
1402
1403 fe->tuner_priv = priv;
1404 break;
1405 }
1406
1407 if (priv->if_khz == 0) {
1408
1409
1410
1411 priv->if_khz = cfg->if_khz;
1412 }
1413
1414 if (priv->xtal_khz == 0)
1415 priv->xtal_khz = cfg->xtal_khz;
1416
1417 if (priv->radio_input == 0)
1418 priv->radio_input = cfg->radio_input;
1419
1420
1421
1422 if ((priv->chip_id == 0) || (cfg->chip_id))
1423
1424
1425 priv->chip_id = (cfg->chip_id) ? cfg->chip_id : 0;
1426
1427
1428
1429 if ((priv->output_amp == 0) || (cfg->output_amp))
1430
1431 priv->output_amp = (cfg->output_amp) ? cfg->output_amp : 0x8a;
1432
1433
1434
1435
1436 if (xc5000_readreg(priv, XREG_PRODUCT_ID, &id) != 0)
1437 goto fail;
1438
1439 switch (id) {
1440 case XC_PRODUCT_ID_FW_LOADED:
1441 printk(KERN_INFO
1442 "xc5000: Successfully identified at address 0x%02x\n",
1443 cfg->i2c_address);
1444 printk(KERN_INFO
1445 "xc5000: Firmware has been loaded previously\n");
1446 break;
1447 case XC_PRODUCT_ID_FW_NOT_LOADED:
1448 printk(KERN_INFO
1449 "xc5000: Successfully identified at address 0x%02x\n",
1450 cfg->i2c_address);
1451 printk(KERN_INFO
1452 "xc5000: Firmware has not been loaded previously\n");
1453 break;
1454 default:
1455 printk(KERN_ERR
1456 "xc5000: Device not found at addr 0x%02x (0x%x)\n",
1457 cfg->i2c_address, id);
1458 goto fail;
1459 }
1460
1461 mutex_unlock(&xc5000_list_mutex);
1462
1463 memcpy(&fe->ops.tuner_ops, &xc5000_tuner_ops,
1464 sizeof(struct dvb_tuner_ops));
1465
1466 return fe;
1467fail:
1468 mutex_unlock(&xc5000_list_mutex);
1469
1470 xc5000_release(fe);
1471 return NULL;
1472}
1473EXPORT_SYMBOL(xc5000_attach);
1474
1475MODULE_AUTHOR("Steven Toth");
1476MODULE_DESCRIPTION("Xceive xc5000 silicon tuner driver");
1477MODULE_LICENSE("GPL");
1478MODULE_FIRMWARE(XC5000A_FIRMWARE);
1479MODULE_FIRMWARE(XC5000C_FIRMWARE);
1480
