linux/drivers/net/ethernet/intel/igbvf/defines.h
<<
>>
Prefs
   1/* SPDX-License-Identifier: GPL-2.0 */
   2/* Copyright(c) 1999 - 2018 Intel Corporation. */
   3
   4#ifndef _E1000_DEFINES_H_
   5#define _E1000_DEFINES_H_
   6
   7/* Number of Transmit and Receive Descriptors must be a multiple of 8 */
   8#define REQ_TX_DESCRIPTOR_MULTIPLE      8
   9#define REQ_RX_DESCRIPTOR_MULTIPLE      8
  10
  11/* IVAR valid bit */
  12#define E1000_IVAR_VALID        0x80
  13
  14/* Receive Descriptor bit definitions */
  15#define E1000_RXD_STAT_DD       0x01    /* Descriptor Done */
  16#define E1000_RXD_STAT_EOP      0x02    /* End of Packet */
  17#define E1000_RXD_STAT_IXSM     0x04    /* Ignore checksum */
  18#define E1000_RXD_STAT_VP       0x08    /* IEEE VLAN Packet */
  19#define E1000_RXD_STAT_UDPCS    0x10    /* UDP xsum calculated */
  20#define E1000_RXD_STAT_TCPCS    0x20    /* TCP xsum calculated */
  21#define E1000_RXD_STAT_IPCS     0x40    /* IP xsum calculated */
  22#define E1000_RXD_ERR_SE        0x02    /* Symbol Error */
  23#define E1000_RXD_SPC_VLAN_MASK 0x0FFF  /* VLAN ID is in lower 12 bits */
  24
  25#define E1000_RXDEXT_STATERR_LB 0x00040000
  26#define E1000_RXDEXT_STATERR_CE 0x01000000
  27#define E1000_RXDEXT_STATERR_SE 0x02000000
  28#define E1000_RXDEXT_STATERR_SEQ        0x04000000
  29#define E1000_RXDEXT_STATERR_CXE        0x10000000
  30#define E1000_RXDEXT_STATERR_TCPE       0x20000000
  31#define E1000_RXDEXT_STATERR_IPE        0x40000000
  32#define E1000_RXDEXT_STATERR_RXE        0x80000000
  33
  34/* Same mask, but for extended and packet split descriptors */
  35#define E1000_RXDEXT_ERR_FRAME_ERR_MASK ( \
  36        E1000_RXDEXT_STATERR_CE  | \
  37        E1000_RXDEXT_STATERR_SE  | \
  38        E1000_RXDEXT_STATERR_SEQ | \
  39        E1000_RXDEXT_STATERR_CXE | \
  40        E1000_RXDEXT_STATERR_RXE)
  41
  42/* Device Control */
  43#define E1000_CTRL_RST          0x04000000  /* Global reset */
  44
  45/* Device Status */
  46#define E1000_STATUS_FD         0x00000001      /* Full duplex.0=half,1=full */
  47#define E1000_STATUS_LU         0x00000002      /* Link up.0=no,1=link */
  48#define E1000_STATUS_TXOFF      0x00000010      /* transmission paused */
  49#define E1000_STATUS_SPEED_10   0x00000000      /* Speed 10Mb/s */
  50#define E1000_STATUS_SPEED_100  0x00000040      /* Speed 100Mb/s */
  51#define E1000_STATUS_SPEED_1000 0x00000080      /* Speed 1000Mb/s */
  52
  53#define SPEED_10        10
  54#define SPEED_100       100
  55#define SPEED_1000      1000
  56#define HALF_DUPLEX     1
  57#define FULL_DUPLEX     2
  58
  59/* Transmit Descriptor bit definitions */
  60#define E1000_TXD_POPTS_IXSM    0x01       /* Insert IP checksum */
  61#define E1000_TXD_POPTS_TXSM    0x02       /* Insert TCP/UDP checksum */
  62#define E1000_TXD_CMD_DEXT      0x20000000 /* Desc extension (0 = legacy) */
  63#define E1000_TXD_STAT_DD       0x00000001 /* Desc Done */
  64
  65#define MAX_JUMBO_FRAME_SIZE            0x3F00
  66#define MAX_STD_JUMBO_FRAME_SIZE        9216
  67
  68/* 802.1q VLAN Packet Size */
  69#define VLAN_TAG_SIZE           4    /* 802.3ac tag (not DMA'd) */
  70
  71/* Error Codes */
  72#define E1000_SUCCESS           0
  73#define E1000_ERR_CONFIG        3
  74#define E1000_ERR_MAC_INIT      5
  75#define E1000_ERR_MBX           15
  76
  77/* SRRCTL bit definitions */
  78#define E1000_SRRCTL_BSIZEPKT_SHIFT             10 /* Shift _right_ */
  79#define E1000_SRRCTL_BSIZEHDRSIZE_MASK          0x00000F00
  80#define E1000_SRRCTL_BSIZEHDRSIZE_SHIFT         2  /* Shift _left_ */
  81#define E1000_SRRCTL_DESCTYPE_ADV_ONEBUF        0x02000000
  82#define E1000_SRRCTL_DESCTYPE_HDR_SPLIT_ALWAYS  0x0A000000
  83#define E1000_SRRCTL_DESCTYPE_MASK              0x0E000000
  84#define E1000_SRRCTL_DROP_EN                    0x80000000
  85
  86#define E1000_SRRCTL_BSIZEPKT_MASK      0x0000007F
  87#define E1000_SRRCTL_BSIZEHDR_MASK      0x00003F00
  88
  89/* Additional Descriptor Control definitions */
  90#define E1000_TXDCTL_QUEUE_ENABLE       0x02000000 /* Enable specific Tx Que */
  91#define E1000_RXDCTL_QUEUE_ENABLE       0x02000000 /* Enable specific Rx Que */
  92
  93/* Direct Cache Access (DCA) definitions */
  94#define E1000_DCA_TXCTRL_TX_WB_RO_EN    BIT(11) /* Tx Desc writeback RO bit */
  95
  96#define E1000_VF_INIT_TIMEOUT   200 /* Number of retries to clear RSTI */
  97
  98#endif /* _E1000_DEFINES_H_ */
  99