linux/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
<<
>>
Prefs
   1/*
   2 * Copyright (c) 2011 Broadcom Corporation
   3 *
   4 * Permission to use, copy, modify, and/or distribute this software for any
   5 * purpose with or without fee is hereby granted, provided that the above
   6 * copyright notice and this permission notice appear in all copies.
   7 *
   8 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
   9 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
  10 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
  11 * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
  12 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
  13 * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
  14 * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  15 */
  16
  17#include <linux/kernel.h>
  18#include <linux/module.h>
  19#include <linux/firmware.h>
  20#include <linux/usb.h>
  21#include <linux/vmalloc.h>
  22
  23#include <brcmu_utils.h>
  24#include <brcm_hw_ids.h>
  25#include <brcmu_wifi.h>
  26#include "bus.h"
  27#include "debug.h"
  28#include "firmware.h"
  29#include "usb.h"
  30#include "core.h"
  31#include "common.h"
  32#include "bcdc.h"
  33
  34
  35#define IOCTL_RESP_TIMEOUT              msecs_to_jiffies(2000)
  36
  37#define BRCMF_USB_RESET_GETVER_SPINWAIT 100     /* in unit of ms */
  38#define BRCMF_USB_RESET_GETVER_LOOP_CNT 10
  39
  40#define BRCMF_POSTBOOT_ID               0xA123  /* ID to detect if dongle
  41                                                   has boot up */
  42#define BRCMF_USB_NRXQ                  50
  43#define BRCMF_USB_NTXQ                  50
  44
  45#define BRCMF_USB_CBCTL_WRITE           0
  46#define BRCMF_USB_CBCTL_READ            1
  47#define BRCMF_USB_MAX_PKT_SIZE          1600
  48
  49BRCMF_FW_DEF(43143, "brcmfmac43143");
  50BRCMF_FW_DEF(43236B, "brcmfmac43236b");
  51BRCMF_FW_DEF(43242A, "brcmfmac43242a");
  52BRCMF_FW_DEF(43569, "brcmfmac43569");
  53BRCMF_FW_DEF(4373, "brcmfmac4373");
  54
  55static const struct brcmf_firmware_mapping brcmf_usb_fwnames[] = {
  56        BRCMF_FW_ENTRY(BRCM_CC_43143_CHIP_ID, 0xFFFFFFFF, 43143),
  57        BRCMF_FW_ENTRY(BRCM_CC_43235_CHIP_ID, 0x00000008, 43236B),
  58        BRCMF_FW_ENTRY(BRCM_CC_43236_CHIP_ID, 0x00000008, 43236B),
  59        BRCMF_FW_ENTRY(BRCM_CC_43238_CHIP_ID, 0x00000008, 43236B),
  60        BRCMF_FW_ENTRY(BRCM_CC_43242_CHIP_ID, 0xFFFFFFFF, 43242A),
  61        BRCMF_FW_ENTRY(BRCM_CC_43566_CHIP_ID, 0xFFFFFFFF, 43569),
  62        BRCMF_FW_ENTRY(BRCM_CC_43569_CHIP_ID, 0xFFFFFFFF, 43569),
  63        BRCMF_FW_ENTRY(CY_CC_4373_CHIP_ID, 0xFFFFFFFF, 4373)
  64};
  65
  66#define TRX_MAGIC               0x30524448      /* "HDR0" */
  67#define TRX_MAX_OFFSET          3               /* Max number of file offsets */
  68#define TRX_UNCOMP_IMAGE        0x20            /* Trx holds uncompressed img */
  69#define TRX_RDL_CHUNK           1500            /* size of each dl transfer */
  70#define TRX_OFFSETS_DLFWLEN_IDX 0
  71
  72/* Control messages: bRequest values */
  73#define DL_GETSTATE     0       /* returns the rdl_state_t struct */
  74#define DL_CHECK_CRC    1       /* currently unused */
  75#define DL_GO           2       /* execute downloaded image */
  76#define DL_START        3       /* initialize dl state */
  77#define DL_REBOOT       4       /* reboot the device in 2 seconds */
  78#define DL_GETVER       5       /* returns the bootrom_id_t struct */
  79#define DL_GO_PROTECTED 6       /* execute the downloaded code and set reset
  80                                 * event to occur in 2 seconds.  It is the
  81                                 * responsibility of the downloaded code to
  82                                 * clear this event
  83                                 */
  84#define DL_EXEC         7       /* jump to a supplied address */
  85#define DL_RESETCFG     8       /* To support single enum on dongle
  86                                 * - Not used by bootloader
  87                                 */
  88#define DL_DEFER_RESP_OK 9      /* Potentially defer the response to setup
  89                                 * if resp unavailable
  90                                 */
  91
  92/* states */
  93#define DL_WAITING      0       /* waiting to rx first pkt */
  94#define DL_READY        1       /* hdr was good, waiting for more of the
  95                                 * compressed image
  96                                 */
  97#define DL_BAD_HDR      2       /* hdr was corrupted */
  98#define DL_BAD_CRC      3       /* compressed image was corrupted */
  99#define DL_RUNNABLE     4       /* download was successful,waiting for go cmd */
 100#define DL_START_FAIL   5       /* failed to initialize correctly */
 101#define DL_NVRAM_TOOBIG 6       /* host specified nvram data exceeds DL_NVRAM
 102                                 * value
 103                                 */
 104#define DL_IMAGE_TOOBIG 7       /* firmware image too big */
 105
 106
 107struct trx_header_le {
 108        __le32 magic;           /* "HDR0" */
 109        __le32 len;             /* Length of file including header */
 110        __le32 crc32;           /* CRC from flag_version to end of file */
 111        __le32 flag_version;    /* 0:15 flags, 16:31 version */
 112        __le32 offsets[TRX_MAX_OFFSET]; /* Offsets of partitions from start of
 113                                         * header
 114                                         */
 115};
 116
 117struct rdl_state_le {
 118        __le32 state;
 119        __le32 bytes;
 120};
 121
 122struct bootrom_id_le {
 123        __le32 chip;            /* Chip id */
 124        __le32 chiprev;         /* Chip rev */
 125        __le32 ramsize;         /* Size of  RAM */
 126        __le32 remapbase;       /* Current remap base address */
 127        __le32 boardtype;       /* Type of board */
 128        __le32 boardrev;        /* Board revision */
 129};
 130
 131struct brcmf_usb_image {
 132        struct list_head list;
 133        s8 *fwname;
 134        u8 *image;
 135        int image_len;
 136};
 137
 138struct brcmf_usbdev_info {
 139        struct brcmf_usbdev bus_pub; /* MUST BE FIRST */
 140        spinlock_t qlock;
 141        struct list_head rx_freeq;
 142        struct list_head rx_postq;
 143        struct list_head tx_freeq;
 144        struct list_head tx_postq;
 145        uint rx_pipe, tx_pipe;
 146
 147        int rx_low_watermark;
 148        int tx_low_watermark;
 149        int tx_high_watermark;
 150        int tx_freecount;
 151        bool tx_flowblock;
 152        spinlock_t tx_flowblock_lock;
 153
 154        struct brcmf_usbreq *tx_reqs;
 155        struct brcmf_usbreq *rx_reqs;
 156
 157        char fw_name[BRCMF_FW_NAME_LEN];
 158        const u8 *image;        /* buffer for combine fw and nvram */
 159        int image_len;
 160
 161        struct usb_device *usbdev;
 162        struct device *dev;
 163        struct completion dev_init_done;
 164
 165        int ctl_in_pipe, ctl_out_pipe;
 166        struct urb *ctl_urb; /* URB for control endpoint */
 167        struct usb_ctrlrequest ctl_write;
 168        struct usb_ctrlrequest ctl_read;
 169        u32 ctl_urb_actual_length;
 170        int ctl_urb_status;
 171        int ctl_completed;
 172        wait_queue_head_t ioctl_resp_wait;
 173        ulong ctl_op;
 174        u8 ifnum;
 175
 176        struct urb *bulk_urb; /* used for FW download */
 177
 178        bool wowl_enabled;
 179        struct brcmf_mp_device *settings;
 180};
 181
 182static void brcmf_usb_rx_refill(struct brcmf_usbdev_info *devinfo,
 183                                struct brcmf_usbreq  *req);
 184
 185static struct brcmf_usbdev *brcmf_usb_get_buspub(struct device *dev)
 186{
 187        struct brcmf_bus *bus_if = dev_get_drvdata(dev);
 188        return bus_if->bus_priv.usb;
 189}
 190
 191static struct brcmf_usbdev_info *brcmf_usb_get_businfo(struct device *dev)
 192{
 193        return brcmf_usb_get_buspub(dev)->devinfo;
 194}
 195
 196static int brcmf_usb_ioctl_resp_wait(struct brcmf_usbdev_info *devinfo)
 197{
 198        return wait_event_timeout(devinfo->ioctl_resp_wait,
 199                                  devinfo->ctl_completed, IOCTL_RESP_TIMEOUT);
 200}
 201
 202static void brcmf_usb_ioctl_resp_wake(struct brcmf_usbdev_info *devinfo)
 203{
 204        wake_up(&devinfo->ioctl_resp_wait);
 205}
 206
 207static void
 208brcmf_usb_ctl_complete(struct brcmf_usbdev_info *devinfo, int type, int status)
 209{
 210        brcmf_dbg(USB, "Enter, status=%d\n", status);
 211
 212        if (unlikely(devinfo == NULL))
 213                return;
 214
 215        if (type == BRCMF_USB_CBCTL_READ) {
 216                if (status == 0)
 217                        devinfo->bus_pub.stats.rx_ctlpkts++;
 218                else
 219                        devinfo->bus_pub.stats.rx_ctlerrs++;
 220        } else if (type == BRCMF_USB_CBCTL_WRITE) {
 221                if (status == 0)
 222                        devinfo->bus_pub.stats.tx_ctlpkts++;
 223                else
 224                        devinfo->bus_pub.stats.tx_ctlerrs++;
 225        }
 226
 227        devinfo->ctl_urb_status = status;
 228        devinfo->ctl_completed = true;
 229        brcmf_usb_ioctl_resp_wake(devinfo);
 230}
 231
 232static void
 233brcmf_usb_ctlread_complete(struct urb *urb)
 234{
 235        struct brcmf_usbdev_info *devinfo =
 236                (struct brcmf_usbdev_info *)urb->context;
 237
 238        brcmf_dbg(USB, "Enter\n");
 239        devinfo->ctl_urb_actual_length = urb->actual_length;
 240        brcmf_usb_ctl_complete(devinfo, BRCMF_USB_CBCTL_READ,
 241                urb->status);
 242}
 243
 244static void
 245brcmf_usb_ctlwrite_complete(struct urb *urb)
 246{
 247        struct brcmf_usbdev_info *devinfo =
 248                (struct brcmf_usbdev_info *)urb->context;
 249
 250        brcmf_dbg(USB, "Enter\n");
 251        brcmf_usb_ctl_complete(devinfo, BRCMF_USB_CBCTL_WRITE,
 252                urb->status);
 253}
 254
 255static int
 256brcmf_usb_send_ctl(struct brcmf_usbdev_info *devinfo, u8 *buf, int len)
 257{
 258        int ret;
 259        u16 size;
 260
 261        brcmf_dbg(USB, "Enter\n");
 262        if (devinfo == NULL || buf == NULL ||
 263            len == 0 || devinfo->ctl_urb == NULL)
 264                return -EINVAL;
 265
 266        size = len;
 267        devinfo->ctl_write.wLength = cpu_to_le16p(&size);
 268        devinfo->ctl_urb->transfer_buffer_length = size;
 269        devinfo->ctl_urb_status = 0;
 270        devinfo->ctl_urb_actual_length = 0;
 271
 272        usb_fill_control_urb(devinfo->ctl_urb,
 273                devinfo->usbdev,
 274                devinfo->ctl_out_pipe,
 275                (unsigned char *) &devinfo->ctl_write,
 276                buf, size,
 277                (usb_complete_t)brcmf_usb_ctlwrite_complete,
 278                devinfo);
 279
 280        ret = usb_submit_urb(devinfo->ctl_urb, GFP_ATOMIC);
 281        if (ret < 0)
 282                brcmf_err("usb_submit_urb failed %d\n", ret);
 283
 284        return ret;
 285}
 286
 287static int
 288brcmf_usb_recv_ctl(struct brcmf_usbdev_info *devinfo, u8 *buf, int len)
 289{
 290        int ret;
 291        u16 size;
 292
 293        brcmf_dbg(USB, "Enter\n");
 294        if ((devinfo == NULL) || (buf == NULL) || (len == 0)
 295                || (devinfo->ctl_urb == NULL))
 296                return -EINVAL;
 297
 298        size = len;
 299        devinfo->ctl_read.wLength = cpu_to_le16p(&size);
 300        devinfo->ctl_urb->transfer_buffer_length = size;
 301
 302        devinfo->ctl_read.bRequestType = USB_DIR_IN
 303                | USB_TYPE_CLASS | USB_RECIP_INTERFACE;
 304        devinfo->ctl_read.bRequest = 1;
 305
 306        usb_fill_control_urb(devinfo->ctl_urb,
 307                devinfo->usbdev,
 308                devinfo->ctl_in_pipe,
 309                (unsigned char *) &devinfo->ctl_read,
 310                buf, size,
 311                (usb_complete_t)brcmf_usb_ctlread_complete,
 312                devinfo);
 313
 314        ret = usb_submit_urb(devinfo->ctl_urb, GFP_ATOMIC);
 315        if (ret < 0)
 316                brcmf_err("usb_submit_urb failed %d\n", ret);
 317
 318        return ret;
 319}
 320
 321static int brcmf_usb_tx_ctlpkt(struct device *dev, u8 *buf, u32 len)
 322{
 323        int err = 0;
 324        int timeout = 0;
 325        struct brcmf_usbdev_info *devinfo = brcmf_usb_get_businfo(dev);
 326
 327        brcmf_dbg(USB, "Enter\n");
 328        if (devinfo->bus_pub.state != BRCMFMAC_USB_STATE_UP)
 329                return -EIO;
 330
 331        if (test_and_set_bit(0, &devinfo->ctl_op))
 332                return -EIO;
 333
 334        devinfo->ctl_completed = false;
 335        err = brcmf_usb_send_ctl(devinfo, buf, len);
 336        if (err) {
 337                brcmf_err("fail %d bytes: %d\n", err, len);
 338                clear_bit(0, &devinfo->ctl_op);
 339                return err;
 340        }
 341        timeout = brcmf_usb_ioctl_resp_wait(devinfo);
 342        clear_bit(0, &devinfo->ctl_op);
 343        if (!timeout) {
 344                brcmf_err("Txctl wait timed out\n");
 345                err = -EIO;
 346        }
 347        return err;
 348}
 349
 350static int brcmf_usb_rx_ctlpkt(struct device *dev, u8 *buf, u32 len)
 351{
 352        int err = 0;
 353        int timeout = 0;
 354        struct brcmf_usbdev_info *devinfo = brcmf_usb_get_businfo(dev);
 355
 356        brcmf_dbg(USB, "Enter\n");
 357        if (devinfo->bus_pub.state != BRCMFMAC_USB_STATE_UP)
 358                return -EIO;
 359
 360        if (test_and_set_bit(0, &devinfo->ctl_op))
 361                return -EIO;
 362
 363        devinfo->ctl_completed = false;
 364        err = brcmf_usb_recv_ctl(devinfo, buf, len);
 365        if (err) {
 366                brcmf_err("fail %d bytes: %d\n", err, len);
 367                clear_bit(0, &devinfo->ctl_op);
 368                return err;
 369        }
 370        timeout = brcmf_usb_ioctl_resp_wait(devinfo);
 371        err = devinfo->ctl_urb_status;
 372        clear_bit(0, &devinfo->ctl_op);
 373        if (!timeout) {
 374                brcmf_err("rxctl wait timed out\n");
 375                err = -EIO;
 376        }
 377        if (!err)
 378                return devinfo->ctl_urb_actual_length;
 379        else
 380                return err;
 381}
 382
 383static struct brcmf_usbreq *brcmf_usb_deq(struct brcmf_usbdev_info *devinfo,
 384                                          struct list_head *q, int *counter)
 385{
 386        unsigned long flags;
 387        struct brcmf_usbreq  *req;
 388        spin_lock_irqsave(&devinfo->qlock, flags);
 389        if (list_empty(q)) {
 390                spin_unlock_irqrestore(&devinfo->qlock, flags);
 391                return NULL;
 392        }
 393        req = list_entry(q->next, struct brcmf_usbreq, list);
 394        list_del_init(q->next);
 395        if (counter)
 396                (*counter)--;
 397        spin_unlock_irqrestore(&devinfo->qlock, flags);
 398        return req;
 399
 400}
 401
 402static void brcmf_usb_enq(struct brcmf_usbdev_info *devinfo,
 403                          struct list_head *q, struct brcmf_usbreq *req,
 404                          int *counter)
 405{
 406        unsigned long flags;
 407        spin_lock_irqsave(&devinfo->qlock, flags);
 408        list_add_tail(&req->list, q);
 409        if (counter)
 410                (*counter)++;
 411        spin_unlock_irqrestore(&devinfo->qlock, flags);
 412}
 413
 414static struct brcmf_usbreq *
 415brcmf_usbdev_qinit(struct list_head *q, int qsize)
 416{
 417        int i;
 418        struct brcmf_usbreq *req, *reqs;
 419
 420        reqs = kcalloc(qsize, sizeof(struct brcmf_usbreq), GFP_ATOMIC);
 421        if (reqs == NULL)
 422                return NULL;
 423
 424        req = reqs;
 425
 426        for (i = 0; i < qsize; i++) {
 427                req->urb = usb_alloc_urb(0, GFP_ATOMIC);
 428                if (!req->urb)
 429                        goto fail;
 430
 431                INIT_LIST_HEAD(&req->list);
 432                list_add_tail(&req->list, q);
 433                req++;
 434        }
 435        return reqs;
 436fail:
 437        brcmf_err("fail!\n");
 438        while (!list_empty(q)) {
 439                req = list_entry(q->next, struct brcmf_usbreq, list);
 440                if (req)
 441                        usb_free_urb(req->urb);
 442                list_del(q->next);
 443        }
 444        return NULL;
 445
 446}
 447
 448static void brcmf_usb_free_q(struct list_head *q)
 449{
 450        struct brcmf_usbreq *req, *next;
 451
 452        list_for_each_entry_safe(req, next, q, list) {
 453                if (!req->urb) {
 454                        brcmf_err("bad req\n");
 455                        break;
 456                }
 457                usb_free_urb(req->urb);
 458                list_del_init(&req->list);
 459        }
 460}
 461
 462static void brcmf_usb_del_fromq(struct brcmf_usbdev_info *devinfo,
 463                                struct brcmf_usbreq *req)
 464{
 465        unsigned long flags;
 466
 467        spin_lock_irqsave(&devinfo->qlock, flags);
 468        list_del_init(&req->list);
 469        spin_unlock_irqrestore(&devinfo->qlock, flags);
 470}
 471
 472
 473static void brcmf_usb_tx_complete(struct urb *urb)
 474{
 475        struct brcmf_usbreq *req = (struct brcmf_usbreq *)urb->context;
 476        struct brcmf_usbdev_info *devinfo = req->devinfo;
 477        unsigned long flags;
 478
 479        brcmf_dbg(USB, "Enter, urb->status=%d, skb=%p\n", urb->status,
 480                  req->skb);
 481        brcmf_usb_del_fromq(devinfo, req);
 482
 483        brcmf_proto_bcdc_txcomplete(devinfo->dev, req->skb, urb->status == 0);
 484        req->skb = NULL;
 485        brcmf_usb_enq(devinfo, &devinfo->tx_freeq, req, &devinfo->tx_freecount);
 486        spin_lock_irqsave(&devinfo->tx_flowblock_lock, flags);
 487        if (devinfo->tx_freecount > devinfo->tx_high_watermark &&
 488                devinfo->tx_flowblock) {
 489                brcmf_proto_bcdc_txflowblock(devinfo->dev, false);
 490                devinfo->tx_flowblock = false;
 491        }
 492        spin_unlock_irqrestore(&devinfo->tx_flowblock_lock, flags);
 493}
 494
 495static void brcmf_usb_rx_complete(struct urb *urb)
 496{
 497        struct brcmf_usbreq  *req = (struct brcmf_usbreq *)urb->context;
 498        struct brcmf_usbdev_info *devinfo = req->devinfo;
 499        struct sk_buff *skb;
 500
 501        brcmf_dbg(USB, "Enter, urb->status=%d\n", urb->status);
 502        brcmf_usb_del_fromq(devinfo, req);
 503        skb = req->skb;
 504        req->skb = NULL;
 505
 506        /* zero length packets indicate usb "failure". Do not refill */
 507        if (urb->status != 0 || !urb->actual_length) {
 508                brcmu_pkt_buf_free_skb(skb);
 509                brcmf_usb_enq(devinfo, &devinfo->rx_freeq, req, NULL);
 510                return;
 511        }
 512
 513        if (devinfo->bus_pub.state == BRCMFMAC_USB_STATE_UP) {
 514                skb_put(skb, urb->actual_length);
 515                brcmf_rx_frame(devinfo->dev, skb, true);
 516                brcmf_usb_rx_refill(devinfo, req);
 517        } else {
 518                brcmu_pkt_buf_free_skb(skb);
 519                brcmf_usb_enq(devinfo, &devinfo->rx_freeq, req, NULL);
 520        }
 521        return;
 522
 523}
 524
 525static void brcmf_usb_rx_refill(struct brcmf_usbdev_info *devinfo,
 526                                struct brcmf_usbreq  *req)
 527{
 528        struct sk_buff *skb;
 529        int ret;
 530
 531        if (!req || !devinfo)
 532                return;
 533
 534        skb = dev_alloc_skb(devinfo->bus_pub.bus_mtu);
 535        if (!skb) {
 536                brcmf_usb_enq(devinfo, &devinfo->rx_freeq, req, NULL);
 537                return;
 538        }
 539        req->skb = skb;
 540
 541        usb_fill_bulk_urb(req->urb, devinfo->usbdev, devinfo->rx_pipe,
 542                          skb->data, skb_tailroom(skb), brcmf_usb_rx_complete,
 543                          req);
 544        req->devinfo = devinfo;
 545        brcmf_usb_enq(devinfo, &devinfo->rx_postq, req, NULL);
 546
 547        ret = usb_submit_urb(req->urb, GFP_ATOMIC);
 548        if (ret) {
 549                brcmf_usb_del_fromq(devinfo, req);
 550                brcmu_pkt_buf_free_skb(req->skb);
 551                req->skb = NULL;
 552                brcmf_usb_enq(devinfo, &devinfo->rx_freeq, req, NULL);
 553        }
 554        return;
 555}
 556
 557static void brcmf_usb_rx_fill_all(struct brcmf_usbdev_info *devinfo)
 558{
 559        struct brcmf_usbreq *req;
 560
 561        if (devinfo->bus_pub.state != BRCMFMAC_USB_STATE_UP) {
 562                brcmf_err("bus is not up=%d\n", devinfo->bus_pub.state);
 563                return;
 564        }
 565        while ((req = brcmf_usb_deq(devinfo, &devinfo->rx_freeq, NULL)) != NULL)
 566                brcmf_usb_rx_refill(devinfo, req);
 567}
 568
 569static void
 570brcmf_usb_state_change(struct brcmf_usbdev_info *devinfo, int state)
 571{
 572        struct brcmf_bus *bcmf_bus = devinfo->bus_pub.bus;
 573
 574        brcmf_dbg(USB, "Enter, current state=%d, new state=%d\n",
 575                  devinfo->bus_pub.state, state);
 576
 577        if (devinfo->bus_pub.state == state)
 578                return;
 579
 580        devinfo->bus_pub.state = state;
 581
 582        /* update state of upper layer */
 583        if (state == BRCMFMAC_USB_STATE_DOWN) {
 584                brcmf_dbg(USB, "DBUS is down\n");
 585                brcmf_bus_change_state(bcmf_bus, BRCMF_BUS_DOWN);
 586        } else if (state == BRCMFMAC_USB_STATE_UP) {
 587                brcmf_dbg(USB, "DBUS is up\n");
 588                brcmf_bus_change_state(bcmf_bus, BRCMF_BUS_UP);
 589        } else {
 590                brcmf_dbg(USB, "DBUS current state=%d\n", state);
 591        }
 592}
 593
 594static int brcmf_usb_tx(struct device *dev, struct sk_buff *skb)
 595{
 596        struct brcmf_usbdev_info *devinfo = brcmf_usb_get_businfo(dev);
 597        struct brcmf_usbreq  *req;
 598        int ret;
 599        unsigned long flags;
 600
 601        brcmf_dbg(USB, "Enter, skb=%p\n", skb);
 602        if (devinfo->bus_pub.state != BRCMFMAC_USB_STATE_UP) {
 603                ret = -EIO;
 604                goto fail;
 605        }
 606
 607        req = brcmf_usb_deq(devinfo, &devinfo->tx_freeq,
 608                                        &devinfo->tx_freecount);
 609        if (!req) {
 610                brcmf_err("no req to send\n");
 611                ret = -ENOMEM;
 612                goto fail;
 613        }
 614
 615        req->skb = skb;
 616        req->devinfo = devinfo;
 617        usb_fill_bulk_urb(req->urb, devinfo->usbdev, devinfo->tx_pipe,
 618                          skb->data, skb->len, brcmf_usb_tx_complete, req);
 619        req->urb->transfer_flags |= URB_ZERO_PACKET;
 620        brcmf_usb_enq(devinfo, &devinfo->tx_postq, req, NULL);
 621        ret = usb_submit_urb(req->urb, GFP_ATOMIC);
 622        if (ret) {
 623                brcmf_err("brcmf_usb_tx usb_submit_urb FAILED\n");
 624                brcmf_usb_del_fromq(devinfo, req);
 625                req->skb = NULL;
 626                brcmf_usb_enq(devinfo, &devinfo->tx_freeq, req,
 627                              &devinfo->tx_freecount);
 628                goto fail;
 629        }
 630
 631        spin_lock_irqsave(&devinfo->tx_flowblock_lock, flags);
 632        if (devinfo->tx_freecount < devinfo->tx_low_watermark &&
 633            !devinfo->tx_flowblock) {
 634                brcmf_proto_bcdc_txflowblock(dev, true);
 635                devinfo->tx_flowblock = true;
 636        }
 637        spin_unlock_irqrestore(&devinfo->tx_flowblock_lock, flags);
 638        return 0;
 639
 640fail:
 641        return ret;
 642}
 643
 644
 645static int brcmf_usb_up(struct device *dev)
 646{
 647        struct brcmf_usbdev_info *devinfo = brcmf_usb_get_businfo(dev);
 648
 649        brcmf_dbg(USB, "Enter\n");
 650        if (devinfo->bus_pub.state == BRCMFMAC_USB_STATE_UP)
 651                return 0;
 652
 653        /* Success, indicate devinfo is fully up */
 654        brcmf_usb_state_change(devinfo, BRCMFMAC_USB_STATE_UP);
 655
 656        if (devinfo->ctl_urb) {
 657                devinfo->ctl_in_pipe = usb_rcvctrlpipe(devinfo->usbdev, 0);
 658                devinfo->ctl_out_pipe = usb_sndctrlpipe(devinfo->usbdev, 0);
 659
 660                /* CTL Write */
 661                devinfo->ctl_write.bRequestType =
 662                        USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE;
 663                devinfo->ctl_write.bRequest = 0;
 664                devinfo->ctl_write.wValue = cpu_to_le16(0);
 665                devinfo->ctl_write.wIndex = cpu_to_le16(devinfo->ifnum);
 666
 667                /* CTL Read */
 668                devinfo->ctl_read.bRequestType =
 669                        USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE;
 670                devinfo->ctl_read.bRequest = 1;
 671                devinfo->ctl_read.wValue = cpu_to_le16(0);
 672                devinfo->ctl_read.wIndex = cpu_to_le16(devinfo->ifnum);
 673        }
 674        brcmf_usb_rx_fill_all(devinfo);
 675        return 0;
 676}
 677
 678static void brcmf_cancel_all_urbs(struct brcmf_usbdev_info *devinfo)
 679{
 680        int i;
 681
 682        if (devinfo->ctl_urb)
 683                usb_kill_urb(devinfo->ctl_urb);
 684        if (devinfo->bulk_urb)
 685                usb_kill_urb(devinfo->bulk_urb);
 686        if (devinfo->tx_reqs)
 687                for (i = 0; i < devinfo->bus_pub.ntxq; i++)
 688                        usb_kill_urb(devinfo->tx_reqs[i].urb);
 689        if (devinfo->rx_reqs)
 690                for (i = 0; i < devinfo->bus_pub.nrxq; i++)
 691                        usb_kill_urb(devinfo->rx_reqs[i].urb);
 692}
 693
 694static void brcmf_usb_down(struct device *dev)
 695{
 696        struct brcmf_usbdev_info *devinfo = brcmf_usb_get_businfo(dev);
 697
 698        brcmf_dbg(USB, "Enter\n");
 699        if (devinfo == NULL)
 700                return;
 701
 702        if (devinfo->bus_pub.state == BRCMFMAC_USB_STATE_DOWN)
 703                return;
 704
 705        brcmf_usb_state_change(devinfo, BRCMFMAC_USB_STATE_DOWN);
 706
 707        brcmf_cancel_all_urbs(devinfo);
 708}
 709
 710static void
 711brcmf_usb_sync_complete(struct urb *urb)
 712{
 713        struct brcmf_usbdev_info *devinfo =
 714                        (struct brcmf_usbdev_info *)urb->context;
 715
 716        devinfo->ctl_completed = true;
 717        brcmf_usb_ioctl_resp_wake(devinfo);
 718}
 719
 720static int brcmf_usb_dl_cmd(struct brcmf_usbdev_info *devinfo, u8 cmd,
 721                            void *buffer, int buflen)
 722{
 723        int ret;
 724        char *tmpbuf;
 725        u16 size;
 726
 727        if ((!devinfo) || (devinfo->ctl_urb == NULL))
 728                return -EINVAL;
 729
 730        tmpbuf = kmalloc(buflen, GFP_ATOMIC);
 731        if (!tmpbuf)
 732                return -ENOMEM;
 733
 734        size = buflen;
 735        devinfo->ctl_urb->transfer_buffer_length = size;
 736
 737        devinfo->ctl_read.wLength = cpu_to_le16p(&size);
 738        devinfo->ctl_read.bRequestType = USB_DIR_IN | USB_TYPE_VENDOR |
 739                USB_RECIP_INTERFACE;
 740        devinfo->ctl_read.bRequest = cmd;
 741
 742        usb_fill_control_urb(devinfo->ctl_urb,
 743                devinfo->usbdev,
 744                usb_rcvctrlpipe(devinfo->usbdev, 0),
 745                (unsigned char *) &devinfo->ctl_read,
 746                (void *) tmpbuf, size,
 747                (usb_complete_t)brcmf_usb_sync_complete, devinfo);
 748
 749        devinfo->ctl_completed = false;
 750        ret = usb_submit_urb(devinfo->ctl_urb, GFP_ATOMIC);
 751        if (ret < 0) {
 752                brcmf_err("usb_submit_urb failed %d\n", ret);
 753                goto finalize;
 754        }
 755
 756        if (!brcmf_usb_ioctl_resp_wait(devinfo)) {
 757                usb_kill_urb(devinfo->ctl_urb);
 758                ret = -ETIMEDOUT;
 759        } else {
 760                memcpy(buffer, tmpbuf, buflen);
 761        }
 762
 763finalize:
 764        kfree(tmpbuf);
 765        return ret;
 766}
 767
 768static bool
 769brcmf_usb_dlneeded(struct brcmf_usbdev_info *devinfo)
 770{
 771        struct bootrom_id_le id;
 772        u32 chipid, chiprev;
 773
 774        brcmf_dbg(USB, "Enter\n");
 775
 776        if (devinfo == NULL)
 777                return false;
 778
 779        /* Check if firmware downloaded already by querying runtime ID */
 780        id.chip = cpu_to_le32(0xDEAD);
 781        brcmf_usb_dl_cmd(devinfo, DL_GETVER, &id, sizeof(id));
 782
 783        chipid = le32_to_cpu(id.chip);
 784        chiprev = le32_to_cpu(id.chiprev);
 785
 786        if ((chipid & 0x4300) == 0x4300)
 787                brcmf_dbg(USB, "chip %x rev 0x%x\n", chipid, chiprev);
 788        else
 789                brcmf_dbg(USB, "chip %d rev 0x%x\n", chipid, chiprev);
 790        if (chipid == BRCMF_POSTBOOT_ID) {
 791                brcmf_dbg(USB, "firmware already downloaded\n");
 792                brcmf_usb_dl_cmd(devinfo, DL_RESETCFG, &id, sizeof(id));
 793                return false;
 794        } else {
 795                devinfo->bus_pub.devid = chipid;
 796                devinfo->bus_pub.chiprev = chiprev;
 797        }
 798        return true;
 799}
 800
 801static int
 802brcmf_usb_resetcfg(struct brcmf_usbdev_info *devinfo)
 803{
 804        struct bootrom_id_le id;
 805        u32 loop_cnt;
 806        int err;
 807
 808        brcmf_dbg(USB, "Enter\n");
 809
 810        loop_cnt = 0;
 811        do {
 812                mdelay(BRCMF_USB_RESET_GETVER_SPINWAIT);
 813                loop_cnt++;
 814                id.chip = cpu_to_le32(0xDEAD);       /* Get the ID */
 815                err = brcmf_usb_dl_cmd(devinfo, DL_GETVER, &id, sizeof(id));
 816                if ((err) && (err != -ETIMEDOUT))
 817                        return err;
 818                if (id.chip == cpu_to_le32(BRCMF_POSTBOOT_ID))
 819                        break;
 820        } while (loop_cnt < BRCMF_USB_RESET_GETVER_LOOP_CNT);
 821
 822        if (id.chip == cpu_to_le32(BRCMF_POSTBOOT_ID)) {
 823                brcmf_dbg(USB, "postboot chip 0x%x/rev 0x%x\n",
 824                          le32_to_cpu(id.chip), le32_to_cpu(id.chiprev));
 825
 826                brcmf_usb_dl_cmd(devinfo, DL_RESETCFG, &id, sizeof(id));
 827                return 0;
 828        } else {
 829                brcmf_err("Cannot talk to Dongle. Firmware is not UP, %d ms\n",
 830                          BRCMF_USB_RESET_GETVER_SPINWAIT * loop_cnt);
 831                return -EINVAL;
 832        }
 833}
 834
 835
 836static int
 837brcmf_usb_dl_send_bulk(struct brcmf_usbdev_info *devinfo, void *buffer, int len)
 838{
 839        int ret;
 840
 841        if ((devinfo == NULL) || (devinfo->bulk_urb == NULL))
 842                return -EINVAL;
 843
 844        /* Prepare the URB */
 845        usb_fill_bulk_urb(devinfo->bulk_urb, devinfo->usbdev,
 846                          devinfo->tx_pipe, buffer, len,
 847                          (usb_complete_t)brcmf_usb_sync_complete, devinfo);
 848
 849        devinfo->bulk_urb->transfer_flags |= URB_ZERO_PACKET;
 850
 851        devinfo->ctl_completed = false;
 852        ret = usb_submit_urb(devinfo->bulk_urb, GFP_ATOMIC);
 853        if (ret) {
 854                brcmf_err("usb_submit_urb failed %d\n", ret);
 855                return ret;
 856        }
 857        ret = brcmf_usb_ioctl_resp_wait(devinfo);
 858        return (ret == 0);
 859}
 860
 861static int
 862brcmf_usb_dl_writeimage(struct brcmf_usbdev_info *devinfo, u8 *fw, int fwlen)
 863{
 864        unsigned int sendlen, sent, dllen;
 865        char *bulkchunk = NULL, *dlpos;
 866        struct rdl_state_le state;
 867        u32 rdlstate, rdlbytes;
 868        int err = 0;
 869
 870        brcmf_dbg(USB, "Enter, fw %p, len %d\n", fw, fwlen);
 871
 872        bulkchunk = kmalloc(TRX_RDL_CHUNK, GFP_ATOMIC);
 873        if (bulkchunk == NULL) {
 874                err = -ENOMEM;
 875                goto fail;
 876        }
 877
 878        /* 1) Prepare USB boot loader for runtime image */
 879        brcmf_usb_dl_cmd(devinfo, DL_START, &state, sizeof(state));
 880
 881        rdlstate = le32_to_cpu(state.state);
 882        rdlbytes = le32_to_cpu(state.bytes);
 883
 884        /* 2) Check we are in the Waiting state */
 885        if (rdlstate != DL_WAITING) {
 886                brcmf_err("Failed to DL_START\n");
 887                err = -EINVAL;
 888                goto fail;
 889        }
 890        sent = 0;
 891        dlpos = fw;
 892        dllen = fwlen;
 893
 894        /* Get chip id and rev */
 895        while (rdlbytes != dllen) {
 896                /* Wait until the usb device reports it received all
 897                 * the bytes we sent */
 898                if ((rdlbytes == sent) && (rdlbytes != dllen)) {
 899                        if ((dllen-sent) < TRX_RDL_CHUNK)
 900                                sendlen = dllen-sent;
 901                        else
 902                                sendlen = TRX_RDL_CHUNK;
 903
 904                        /* simply avoid having to send a ZLP by ensuring we
 905                         * never have an even
 906                         * multiple of 64
 907                         */
 908                        if (!(sendlen % 64))
 909                                sendlen -= 4;
 910
 911                        /* send data */
 912                        memcpy(bulkchunk, dlpos, sendlen);
 913                        if (brcmf_usb_dl_send_bulk(devinfo, bulkchunk,
 914                                                   sendlen)) {
 915                                brcmf_err("send_bulk failed\n");
 916                                err = -EINVAL;
 917                                goto fail;
 918                        }
 919
 920                        dlpos += sendlen;
 921                        sent += sendlen;
 922                }
 923                err = brcmf_usb_dl_cmd(devinfo, DL_GETSTATE, &state,
 924                                       sizeof(state));
 925                if (err) {
 926                        brcmf_err("DL_GETSTATE Failed\n");
 927                        goto fail;
 928                }
 929
 930                rdlstate = le32_to_cpu(state.state);
 931                rdlbytes = le32_to_cpu(state.bytes);
 932
 933                /* restart if an error is reported */
 934                if (rdlstate == DL_BAD_HDR || rdlstate == DL_BAD_CRC) {
 935                        brcmf_err("Bad Hdr or Bad CRC state %d\n",
 936                                  rdlstate);
 937                        err = -EINVAL;
 938                        goto fail;
 939                }
 940        }
 941
 942fail:
 943        kfree(bulkchunk);
 944        brcmf_dbg(USB, "Exit, err=%d\n", err);
 945        return err;
 946}
 947
 948static int brcmf_usb_dlstart(struct brcmf_usbdev_info *devinfo, u8 *fw, int len)
 949{
 950        int err;
 951
 952        brcmf_dbg(USB, "Enter\n");
 953
 954        if (devinfo == NULL)
 955                return -EINVAL;
 956
 957        if (devinfo->bus_pub.devid == 0xDEAD)
 958                return -EINVAL;
 959
 960        err = brcmf_usb_dl_writeimage(devinfo, fw, len);
 961        if (err == 0)
 962                devinfo->bus_pub.state = BRCMFMAC_USB_STATE_DL_DONE;
 963        else
 964                devinfo->bus_pub.state = BRCMFMAC_USB_STATE_DL_FAIL;
 965        brcmf_dbg(USB, "Exit, err=%d\n", err);
 966
 967        return err;
 968}
 969
 970static int brcmf_usb_dlrun(struct brcmf_usbdev_info *devinfo)
 971{
 972        struct rdl_state_le state;
 973
 974        brcmf_dbg(USB, "Enter\n");
 975        if (!devinfo)
 976                return -EINVAL;
 977
 978        if (devinfo->bus_pub.devid == 0xDEAD)
 979                return -EINVAL;
 980
 981        /* Check we are runnable */
 982        state.state = 0;
 983        brcmf_usb_dl_cmd(devinfo, DL_GETSTATE, &state, sizeof(state));
 984
 985        /* Start the image */
 986        if (state.state == cpu_to_le32(DL_RUNNABLE)) {
 987                if (brcmf_usb_dl_cmd(devinfo, DL_GO, &state, sizeof(state)))
 988                        return -ENODEV;
 989                if (brcmf_usb_resetcfg(devinfo))
 990                        return -ENODEV;
 991                /* The Dongle may go for re-enumeration. */
 992        } else {
 993                brcmf_err("Dongle not runnable\n");
 994                return -EINVAL;
 995        }
 996        brcmf_dbg(USB, "Exit\n");
 997        return 0;
 998}
 999
1000static int
1001brcmf_usb_fw_download(struct brcmf_usbdev_info *devinfo)
1002{
1003        int err;
1004
1005        brcmf_dbg(USB, "Enter\n");
1006        if (devinfo == NULL)
1007                return -ENODEV;
1008
1009        if (!devinfo->image) {
1010                brcmf_err("No firmware!\n");
1011                return -ENOENT;
1012        }
1013
1014        err = brcmf_usb_dlstart(devinfo,
1015                (u8 *)devinfo->image, devinfo->image_len);
1016        if (err == 0)
1017                err = brcmf_usb_dlrun(devinfo);
1018        return err;
1019}
1020
1021
1022static void brcmf_usb_detach(struct brcmf_usbdev_info *devinfo)
1023{
1024        brcmf_dbg(USB, "Enter, devinfo %p\n", devinfo);
1025
1026        /* free the URBS */
1027        brcmf_usb_free_q(&devinfo->rx_freeq);
1028        brcmf_usb_free_q(&devinfo->tx_freeq);
1029
1030        usb_free_urb(devinfo->ctl_urb);
1031        usb_free_urb(devinfo->bulk_urb);
1032
1033        kfree(devinfo->tx_reqs);
1034        kfree(devinfo->rx_reqs);
1035
1036        if (devinfo->settings)
1037                brcmf_release_module_param(devinfo->settings);
1038}
1039
1040
1041static int check_file(const u8 *headers)
1042{
1043        struct trx_header_le *trx;
1044        int actual_len = -1;
1045
1046        brcmf_dbg(USB, "Enter\n");
1047        /* Extract trx header */
1048        trx = (struct trx_header_le *) headers;
1049        if (trx->magic != cpu_to_le32(TRX_MAGIC))
1050                return -1;
1051
1052        headers += sizeof(struct trx_header_le);
1053
1054        if (le32_to_cpu(trx->flag_version) & TRX_UNCOMP_IMAGE) {
1055                actual_len = le32_to_cpu(trx->offsets[TRX_OFFSETS_DLFWLEN_IDX]);
1056                return actual_len + sizeof(struct trx_header_le);
1057        }
1058        return -1;
1059}
1060
1061
1062static
1063struct brcmf_usbdev *brcmf_usb_attach(struct brcmf_usbdev_info *devinfo,
1064                                      int nrxq, int ntxq)
1065{
1066        brcmf_dbg(USB, "Enter\n");
1067
1068        devinfo->bus_pub.nrxq = nrxq;
1069        devinfo->rx_low_watermark = nrxq / 2;
1070        devinfo->bus_pub.devinfo = devinfo;
1071        devinfo->bus_pub.ntxq = ntxq;
1072        devinfo->bus_pub.state = BRCMFMAC_USB_STATE_DOWN;
1073
1074        /* flow control when too many tx urbs posted */
1075        devinfo->tx_low_watermark = ntxq / 4;
1076        devinfo->tx_high_watermark = devinfo->tx_low_watermark * 3;
1077        devinfo->bus_pub.bus_mtu = BRCMF_USB_MAX_PKT_SIZE;
1078
1079        /* Initialize other structure content */
1080        init_waitqueue_head(&devinfo->ioctl_resp_wait);
1081
1082        /* Initialize the spinlocks */
1083        spin_lock_init(&devinfo->qlock);
1084        spin_lock_init(&devinfo->tx_flowblock_lock);
1085
1086        INIT_LIST_HEAD(&devinfo->rx_freeq);
1087        INIT_LIST_HEAD(&devinfo->rx_postq);
1088
1089        INIT_LIST_HEAD(&devinfo->tx_freeq);
1090        INIT_LIST_HEAD(&devinfo->tx_postq);
1091
1092        devinfo->tx_flowblock = false;
1093
1094        devinfo->rx_reqs = brcmf_usbdev_qinit(&devinfo->rx_freeq, nrxq);
1095        if (!devinfo->rx_reqs)
1096                goto error;
1097
1098        devinfo->tx_reqs = brcmf_usbdev_qinit(&devinfo->tx_freeq, ntxq);
1099        if (!devinfo->tx_reqs)
1100                goto error;
1101        devinfo->tx_freecount = ntxq;
1102
1103        devinfo->ctl_urb = usb_alloc_urb(0, GFP_ATOMIC);
1104        if (!devinfo->ctl_urb)
1105                goto error;
1106        devinfo->bulk_urb = usb_alloc_urb(0, GFP_ATOMIC);
1107        if (!devinfo->bulk_urb)
1108                goto error;
1109
1110        return &devinfo->bus_pub;
1111
1112error:
1113        brcmf_err("failed!\n");
1114        brcmf_usb_detach(devinfo);
1115        return NULL;
1116}
1117
1118static void brcmf_usb_wowl_config(struct device *dev, bool enabled)
1119{
1120        struct brcmf_usbdev_info *devinfo = brcmf_usb_get_businfo(dev);
1121
1122        brcmf_dbg(USB, "Configuring WOWL, enabled=%d\n", enabled);
1123        devinfo->wowl_enabled = enabled;
1124        if (enabled)
1125                device_set_wakeup_enable(devinfo->dev, true);
1126        else
1127                device_set_wakeup_enable(devinfo->dev, false);
1128}
1129
1130static
1131int brcmf_usb_get_fwname(struct device *dev, const char *ext, u8 *fw_name)
1132{
1133        struct brcmf_bus *bus = dev_get_drvdata(dev);
1134        struct brcmf_fw_request *fwreq;
1135        struct brcmf_fw_name fwnames[] = {
1136                { ext, fw_name },
1137        };
1138
1139        fwreq = brcmf_fw_alloc_request(bus->chip, bus->chiprev,
1140                                       brcmf_usb_fwnames,
1141                                       ARRAY_SIZE(brcmf_usb_fwnames),
1142                                       fwnames, ARRAY_SIZE(fwnames));
1143        if (!fwreq)
1144                return -ENOMEM;
1145
1146        kfree(fwreq);
1147        return 0;
1148}
1149
1150static const struct brcmf_bus_ops brcmf_usb_bus_ops = {
1151        .preinit = brcmf_usb_up,
1152        .stop = brcmf_usb_down,
1153        .txdata = brcmf_usb_tx,
1154        .txctl = brcmf_usb_tx_ctlpkt,
1155        .rxctl = brcmf_usb_rx_ctlpkt,
1156        .wowl_config = brcmf_usb_wowl_config,
1157        .get_fwname = brcmf_usb_get_fwname,
1158};
1159
1160#define BRCMF_USB_FW_CODE       0
1161
1162static void brcmf_usb_probe_phase2(struct device *dev, int ret,
1163                                   struct brcmf_fw_request *fwreq)
1164{
1165        struct brcmf_bus *bus = dev_get_drvdata(dev);
1166        struct brcmf_usbdev_info *devinfo = bus->bus_priv.usb->devinfo;
1167        const struct firmware *fw;
1168
1169        if (ret)
1170                goto error;
1171
1172        brcmf_dbg(USB, "Start fw downloading\n");
1173
1174        fw = fwreq->items[BRCMF_USB_FW_CODE].binary;
1175        kfree(fwreq);
1176
1177        ret = check_file(fw->data);
1178        if (ret < 0) {
1179                brcmf_err("invalid firmware\n");
1180                release_firmware(fw);
1181                goto error;
1182        }
1183
1184        devinfo->image = fw->data;
1185        devinfo->image_len = fw->size;
1186
1187        ret = brcmf_usb_fw_download(devinfo);
1188        release_firmware(fw);
1189        if (ret)
1190                goto error;
1191
1192        /* Attach to the common driver interface */
1193        ret = brcmf_attach(devinfo->dev, devinfo->settings);
1194        if (ret)
1195                goto error;
1196
1197        complete(&devinfo->dev_init_done);
1198        return;
1199error:
1200        brcmf_dbg(TRACE, "failed: dev=%s, err=%d\n", dev_name(dev), ret);
1201        complete(&devinfo->dev_init_done);
1202        device_release_driver(dev);
1203}
1204
1205static struct brcmf_fw_request *
1206brcmf_usb_prepare_fw_request(struct brcmf_usbdev_info *devinfo)
1207{
1208        struct brcmf_fw_request *fwreq;
1209        struct brcmf_fw_name fwnames[] = {
1210                { ".bin", devinfo->fw_name },
1211        };
1212
1213        fwreq = brcmf_fw_alloc_request(devinfo->bus_pub.devid,
1214                                       devinfo->bus_pub.chiprev,
1215                                       brcmf_usb_fwnames,
1216                                       ARRAY_SIZE(brcmf_usb_fwnames),
1217                                       fwnames, ARRAY_SIZE(fwnames));
1218        if (!fwreq)
1219                return NULL;
1220
1221        fwreq->items[BRCMF_USB_FW_CODE].type = BRCMF_FW_TYPE_BINARY;
1222
1223        return fwreq;
1224}
1225
1226static int brcmf_usb_probe_cb(struct brcmf_usbdev_info *devinfo)
1227{
1228        struct brcmf_bus *bus = NULL;
1229        struct brcmf_usbdev *bus_pub = NULL;
1230        struct device *dev = devinfo->dev;
1231        struct brcmf_fw_request *fwreq;
1232        int ret;
1233
1234        brcmf_dbg(USB, "Enter\n");
1235        bus_pub = brcmf_usb_attach(devinfo, BRCMF_USB_NRXQ, BRCMF_USB_NTXQ);
1236        if (!bus_pub)
1237                return -ENODEV;
1238
1239        bus = kzalloc(sizeof(struct brcmf_bus), GFP_ATOMIC);
1240        if (!bus) {
1241                ret = -ENOMEM;
1242                goto fail;
1243        }
1244
1245        bus->dev = dev;
1246        bus_pub->bus = bus;
1247        bus->bus_priv.usb = bus_pub;
1248        dev_set_drvdata(dev, bus);
1249        bus->ops = &brcmf_usb_bus_ops;
1250        bus->proto_type = BRCMF_PROTO_BCDC;
1251        bus->always_use_fws_queue = true;
1252#ifdef CONFIG_PM
1253        bus->wowl_supported = true;
1254#endif
1255
1256        devinfo->settings = brcmf_get_module_param(bus->dev, BRCMF_BUSTYPE_USB,
1257                                                   bus_pub->devid,
1258                                                   bus_pub->chiprev);
1259        if (!devinfo->settings) {
1260                ret = -ENOMEM;
1261                goto fail;
1262        }
1263
1264        if (!brcmf_usb_dlneeded(devinfo)) {
1265                ret = brcmf_attach(devinfo->dev, devinfo->settings);
1266                if (ret)
1267                        goto fail;
1268                /* we are done */
1269                complete(&devinfo->dev_init_done);
1270                return 0;
1271        }
1272        bus->chip = bus_pub->devid;
1273        bus->chiprev = bus_pub->chiprev;
1274
1275        fwreq = brcmf_usb_prepare_fw_request(devinfo);
1276        if (!fwreq) {
1277                ret = -ENOMEM;
1278                goto fail;
1279        }
1280
1281        /* request firmware here */
1282        ret = brcmf_fw_get_firmwares(dev, fwreq, brcmf_usb_probe_phase2);
1283        if (ret) {
1284                brcmf_err("firmware request failed: %d\n", ret);
1285                kfree(fwreq);
1286                goto fail;
1287        }
1288
1289        return 0;
1290
1291fail:
1292        /* Release resources in reverse order */
1293        kfree(bus);
1294        brcmf_usb_detach(devinfo);
1295        return ret;
1296}
1297
1298static void
1299brcmf_usb_disconnect_cb(struct brcmf_usbdev_info *devinfo)
1300{
1301        if (!devinfo)
1302                return;
1303        brcmf_dbg(USB, "Enter, bus_pub %p\n", devinfo);
1304
1305        brcmf_detach(devinfo->dev);
1306        kfree(devinfo->bus_pub.bus);
1307        brcmf_usb_detach(devinfo);
1308}
1309
1310static int
1311brcmf_usb_probe(struct usb_interface *intf, const struct usb_device_id *id)
1312{
1313        struct usb_device *usb = interface_to_usbdev(intf);
1314        struct brcmf_usbdev_info *devinfo;
1315        struct usb_interface_descriptor *desc;
1316        struct usb_endpoint_descriptor *endpoint;
1317        int ret = 0;
1318        u32 num_of_eps;
1319        u8 endpoint_num, ep;
1320
1321        brcmf_dbg(USB, "Enter 0x%04x:0x%04x\n", id->idVendor, id->idProduct);
1322
1323        devinfo = kzalloc(sizeof(*devinfo), GFP_ATOMIC);
1324        if (devinfo == NULL)
1325                return -ENOMEM;
1326
1327        devinfo->usbdev = usb;
1328        devinfo->dev = &usb->dev;
1329        /* Init completion, to protect for disconnect while still loading.
1330         * Necessary because of the asynchronous firmware load construction
1331         */
1332        init_completion(&devinfo->dev_init_done);
1333
1334        usb_set_intfdata(intf, devinfo);
1335
1336        /* Check that the device supports only one configuration */
1337        if (usb->descriptor.bNumConfigurations != 1) {
1338                brcmf_err("Number of configurations: %d not supported\n",
1339                          usb->descriptor.bNumConfigurations);
1340                ret = -ENODEV;
1341                goto fail;
1342        }
1343
1344        if ((usb->descriptor.bDeviceClass != USB_CLASS_VENDOR_SPEC) &&
1345            (usb->descriptor.bDeviceClass != USB_CLASS_MISC) &&
1346            (usb->descriptor.bDeviceClass != USB_CLASS_WIRELESS_CONTROLLER)) {
1347                brcmf_err("Device class: 0x%x not supported\n",
1348                          usb->descriptor.bDeviceClass);
1349                ret = -ENODEV;
1350                goto fail;
1351        }
1352
1353        desc = &intf->altsetting[0].desc;
1354        if ((desc->bInterfaceClass != USB_CLASS_VENDOR_SPEC) ||
1355            (desc->bInterfaceSubClass != 2) ||
1356            (desc->bInterfaceProtocol != 0xff)) {
1357                brcmf_err("non WLAN interface %d: 0x%x:0x%x:0x%x\n",
1358                          desc->bInterfaceNumber, desc->bInterfaceClass,
1359                          desc->bInterfaceSubClass, desc->bInterfaceProtocol);
1360                ret = -ENODEV;
1361                goto fail;
1362        }
1363
1364        num_of_eps = desc->bNumEndpoints;
1365        for (ep = 0; ep < num_of_eps; ep++) {
1366                endpoint = &intf->altsetting[0].endpoint[ep].desc;
1367                endpoint_num = usb_endpoint_num(endpoint);
1368                if (!usb_endpoint_xfer_bulk(endpoint))
1369                        continue;
1370                if (usb_endpoint_dir_in(endpoint)) {
1371                        if (!devinfo->rx_pipe)
1372                                devinfo->rx_pipe =
1373                                        usb_rcvbulkpipe(usb, endpoint_num);
1374                } else {
1375                        if (!devinfo->tx_pipe)
1376                                devinfo->tx_pipe =
1377                                        usb_sndbulkpipe(usb, endpoint_num);
1378                }
1379        }
1380        if (devinfo->rx_pipe == 0) {
1381                brcmf_err("No RX (in) Bulk EP found\n");
1382                ret = -ENODEV;
1383                goto fail;
1384        }
1385        if (devinfo->tx_pipe == 0) {
1386                brcmf_err("No TX (out) Bulk EP found\n");
1387                ret = -ENODEV;
1388                goto fail;
1389        }
1390
1391        devinfo->ifnum = desc->bInterfaceNumber;
1392
1393        if (usb->speed == USB_SPEED_SUPER_PLUS)
1394                brcmf_dbg(USB, "Broadcom super speed plus USB WLAN interface detected\n");
1395        else if (usb->speed == USB_SPEED_SUPER)
1396                brcmf_dbg(USB, "Broadcom super speed USB WLAN interface detected\n");
1397        else if (usb->speed == USB_SPEED_HIGH)
1398                brcmf_dbg(USB, "Broadcom high speed USB WLAN interface detected\n");
1399        else
1400                brcmf_dbg(USB, "Broadcom full speed USB WLAN interface detected\n");
1401
1402        ret = brcmf_usb_probe_cb(devinfo);
1403        if (ret)
1404                goto fail;
1405
1406        /* Success */
1407        return 0;
1408
1409fail:
1410        complete(&devinfo->dev_init_done);
1411        kfree(devinfo);
1412        usb_set_intfdata(intf, NULL);
1413        return ret;
1414}
1415
1416static void
1417brcmf_usb_disconnect(struct usb_interface *intf)
1418{
1419        struct brcmf_usbdev_info *devinfo;
1420
1421        brcmf_dbg(USB, "Enter\n");
1422        devinfo = (struct brcmf_usbdev_info *)usb_get_intfdata(intf);
1423
1424        if (devinfo) {
1425                wait_for_completion(&devinfo->dev_init_done);
1426                /* Make sure that devinfo still exists. Firmware probe routines
1427                 * may have released the device and cleared the intfdata.
1428                 */
1429                if (!usb_get_intfdata(intf))
1430                        goto done;
1431
1432                brcmf_usb_disconnect_cb(devinfo);
1433                kfree(devinfo);
1434        }
1435done:
1436        brcmf_dbg(USB, "Exit\n");
1437}
1438
1439/*
1440 * only need to signal the bus being down and update the state.
1441 */
1442static int brcmf_usb_suspend(struct usb_interface *intf, pm_message_t state)
1443{
1444        struct usb_device *usb = interface_to_usbdev(intf);
1445        struct brcmf_usbdev_info *devinfo = brcmf_usb_get_businfo(&usb->dev);
1446
1447        brcmf_dbg(USB, "Enter\n");
1448        devinfo->bus_pub.state = BRCMFMAC_USB_STATE_SLEEP;
1449        if (devinfo->wowl_enabled)
1450                brcmf_cancel_all_urbs(devinfo);
1451        else
1452                brcmf_detach(&usb->dev);
1453        return 0;
1454}
1455
1456/*
1457 * (re-) start the bus.
1458 */
1459static int brcmf_usb_resume(struct usb_interface *intf)
1460{
1461        struct usb_device *usb = interface_to_usbdev(intf);
1462        struct brcmf_usbdev_info *devinfo = brcmf_usb_get_businfo(&usb->dev);
1463
1464        brcmf_dbg(USB, "Enter\n");
1465        if (!devinfo->wowl_enabled)
1466                return brcmf_attach(devinfo->dev, devinfo->settings);
1467
1468        devinfo->bus_pub.state = BRCMFMAC_USB_STATE_UP;
1469        brcmf_usb_rx_fill_all(devinfo);
1470        return 0;
1471}
1472
1473static int brcmf_usb_reset_resume(struct usb_interface *intf)
1474{
1475        struct usb_device *usb = interface_to_usbdev(intf);
1476        struct brcmf_usbdev_info *devinfo = brcmf_usb_get_businfo(&usb->dev);
1477        struct brcmf_fw_request *fwreq;
1478        int ret;
1479
1480        brcmf_dbg(USB, "Enter\n");
1481
1482        fwreq = brcmf_usb_prepare_fw_request(devinfo);
1483        if (!fwreq)
1484                return -ENOMEM;
1485
1486        ret = brcmf_fw_get_firmwares(&usb->dev, fwreq, brcmf_usb_probe_phase2);
1487        if (ret < 0)
1488                kfree(fwreq);
1489
1490        return ret;
1491}
1492
1493#define BRCMF_USB_DEVICE(dev_id)        \
1494        { USB_DEVICE(BRCM_USB_VENDOR_ID_BROADCOM, dev_id) }
1495
1496#define LINKSYS_USB_DEVICE(dev_id)      \
1497        { USB_DEVICE(BRCM_USB_VENDOR_ID_LINKSYS, dev_id) }
1498
1499#define CYPRESS_USB_DEVICE(dev_id)      \
1500        { USB_DEVICE(CY_USB_VENDOR_ID_CYPRESS, dev_id) }
1501
1502static const struct usb_device_id brcmf_usb_devid_table[] = {
1503        BRCMF_USB_DEVICE(BRCM_USB_43143_DEVICE_ID),
1504        BRCMF_USB_DEVICE(BRCM_USB_43236_DEVICE_ID),
1505        BRCMF_USB_DEVICE(BRCM_USB_43242_DEVICE_ID),
1506        BRCMF_USB_DEVICE(BRCM_USB_43569_DEVICE_ID),
1507        LINKSYS_USB_DEVICE(BRCM_USB_43235_LINKSYS_DEVICE_ID),
1508        CYPRESS_USB_DEVICE(CY_USB_4373_DEVICE_ID),
1509        { USB_DEVICE(BRCM_USB_VENDOR_ID_LG, BRCM_USB_43242_LG_DEVICE_ID) },
1510        /* special entry for device with firmware loaded and running */
1511        BRCMF_USB_DEVICE(BRCM_USB_BCMFW_DEVICE_ID),
1512        CYPRESS_USB_DEVICE(BRCM_USB_BCMFW_DEVICE_ID),
1513        { /* end: all zeroes */ }
1514};
1515
1516MODULE_DEVICE_TABLE(usb, brcmf_usb_devid_table);
1517
1518static struct usb_driver brcmf_usbdrvr = {
1519        .name = KBUILD_MODNAME,
1520        .probe = brcmf_usb_probe,
1521        .disconnect = brcmf_usb_disconnect,
1522        .id_table = brcmf_usb_devid_table,
1523        .suspend = brcmf_usb_suspend,
1524        .resume = brcmf_usb_resume,
1525        .reset_resume = brcmf_usb_reset_resume,
1526        .disable_hub_initiated_lpm = 1,
1527};
1528
1529static int brcmf_usb_reset_device(struct device *dev, void *notused)
1530{
1531        /* device past is the usb interface so we
1532         * need to use parent here.
1533         */
1534        brcmf_dev_reset(dev->parent);
1535        return 0;
1536}
1537
1538void brcmf_usb_exit(void)
1539{
1540        struct device_driver *drv = &brcmf_usbdrvr.drvwrap.driver;
1541        int ret;
1542
1543        brcmf_dbg(USB, "Enter\n");
1544        ret = driver_for_each_device(drv, NULL, NULL,
1545                                     brcmf_usb_reset_device);
1546        usb_deregister(&brcmf_usbdrvr);
1547}
1548
1549void brcmf_usb_register(void)
1550{
1551        int ret;
1552
1553        brcmf_dbg(USB, "Enter\n");
1554        ret = usb_register(&brcmf_usbdrvr);
1555        if (ret)
1556                brcmf_err("usb_register failed %d\n", ret);
1557}
1558