1/* 2 * This file is provided under a dual BSD/GPLv2 license. When using or 3 * redistributing this file, you may do so under either license. 4 * 5 * GPL LICENSE SUMMARY 6 * 7 * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. 8 * 9 * This program is free software; you can redistribute it and/or modify 10 * it under the terms of version 2 of the GNU General Public License as 11 * published by the Free Software Foundation. 12 * 13 * This program is distributed in the hope that it will be useful, but 14 * WITHOUT ANY WARRANTY; without even the implied warranty of 15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU 16 * General Public License for more details. 17 * 18 * You should have received a copy of the GNU General Public License 19 * along with this program; if not, write to the Free Software 20 * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. 21 * The full GNU General Public License is included in this distribution 22 * in the file called LICENSE.GPL. 23 * 24 * BSD LICENSE 25 * 26 * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. 27 * All rights reserved. 28 * 29 * Redistribution and use in source and binary forms, with or without 30 * modification, are permitted provided that the following conditions 31 * are met: 32 * 33 * * Redistributions of source code must retain the above copyright 34 * notice, this list of conditions and the following disclaimer. 35 * * Redistributions in binary form must reproduce the above copyright 36 * notice, this list of conditions and the following disclaimer in 37 * the documentation and/or other materials provided with the 38 * distribution. 39 * * Neither the name of Intel Corporation nor the names of its 40 * contributors may be used to endorse or promote products derived 41 * from this software without specific prior written permission. 42 * 43 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 44 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 45 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 46 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 47 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 48 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 49 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 50 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 51 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 52 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 53 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 54 */ 55 56#ifndef __ISCI_H__ 57#define __ISCI_H__ 58 59#include <linux/interrupt.h> 60#include <linux/types.h> 61 62#define DRV_NAME "isci" 63#define SCI_PCI_BAR_COUNT 2 64#define SCI_NUM_MSI_X_INT 2 65#define SCI_SMU_BAR 0 66#define SCI_SMU_BAR_SIZE (16*1024) 67#define SCI_SCU_BAR 1 68#define SCI_SCU_BAR_SIZE (4*1024*1024) 69#define SCI_IO_SPACE_BAR0 2 70#define SCI_IO_SPACE_BAR1 3 71#define ISCI_CAN_QUEUE_VAL 250 /* < SCI_MAX_IO_REQUESTS ? */ 72#define SCIC_CONTROLLER_STOP_TIMEOUT 5000 73 74#define SCI_CONTROLLER_INVALID_IO_TAG 0xFFFF 75 76#define SCI_MAX_PHYS (4UL) 77#define SCI_MAX_PORTS SCI_MAX_PHYS 78#define SCI_MAX_SMP_PHYS (384) /* not silicon constrained */ 79#define SCI_MAX_REMOTE_DEVICES (256UL) 80#define SCI_MAX_IO_REQUESTS (256UL) 81#define SCI_MAX_SEQ (16) 82#define SCI_MAX_MSIX_MESSAGES (2) 83#define SCI_MAX_SCATTER_GATHER_ELEMENTS 130 /* not silicon constrained */ 84#define SCI_MAX_CONTROLLERS 2 85#define SCI_MAX_DOMAINS SCI_MAX_PORTS 86 87#define SCU_MAX_CRITICAL_NOTIFICATIONS (384) 88#define SCU_MAX_EVENTS_SHIFT (7) 89#define SCU_MAX_EVENTS (1 << SCU_MAX_EVENTS_SHIFT) 90#define SCU_MAX_UNSOLICITED_FRAMES (128) 91#define SCU_MAX_COMPLETION_QUEUE_SCRATCH (128) 92#define SCU_MAX_COMPLETION_QUEUE_ENTRIES (SCU_MAX_CRITICAL_NOTIFICATIONS \ 93 + SCU_MAX_EVENTS \ 94 + SCU_MAX_UNSOLICITED_FRAMES \ 95 + SCI_MAX_IO_REQUESTS \ 96 + SCU_MAX_COMPLETION_QUEUE_SCRATCH) 97#define SCU_MAX_COMPLETION_QUEUE_SHIFT (ilog2(SCU_MAX_COMPLETION_QUEUE_ENTRIES)) 98 99#define SCU_ABSOLUTE_MAX_UNSOLICITED_FRAMES (4096) 100#define SCU_UNSOLICITED_FRAME_BUFFER_SIZE (1024U) 101#define SCU_INVALID_FRAME_INDEX (0xFFFF) 102 103#define SCU_IO_REQUEST_MAX_SGE_SIZE (0x00FFFFFF) 104#define SCU_IO_REQUEST_MAX_TRANSFER_LENGTH (0x00FFFFFF) 105 106static inline void check_sizes(void) 107{ 108 BUILD_BUG_ON_NOT_POWER_OF_2(SCU_MAX_EVENTS); 109 BUILD_BUG_ON(SCU_MAX_UNSOLICITED_FRAMES <= 8); 110 BUILD_BUG_ON_NOT_POWER_OF_2(SCU_MAX_UNSOLICITED_FRAMES); 111 BUILD_BUG_ON_NOT_POWER_OF_2(SCU_MAX_COMPLETION_QUEUE_ENTRIES); 112 BUILD_BUG_ON(SCU_MAX_UNSOLICITED_FRAMES > SCU_ABSOLUTE_MAX_UNSOLICITED_FRAMES); 113 BUILD_BUG_ON_NOT_POWER_OF_2(SCI_MAX_IO_REQUESTS); 114 BUILD_BUG_ON_NOT_POWER_OF_2(SCI_MAX_SEQ); 115} 116 117/** 118 * enum sci_status - This is the general return status enumeration for non-IO, 119 * non-task management related SCI interface methods. 120 * 121 * 122 */ 123enum sci_status { 124 /** 125 * This member indicates successful completion. 126 */ 127 SCI_SUCCESS = 0, 128 129 /** 130 * This value indicates that the calling method completed successfully, 131 * but that the IO may have completed before having it's start method 132 * invoked. This occurs during SAT translation for requests that do 133 * not require an IO to the target or for any other requests that may 134 * be completed without having to submit IO. 135 */ 136 SCI_SUCCESS_IO_COMPLETE_BEFORE_START, 137 138 /** 139 * This Value indicates that the SCU hardware returned an early response 140 * because the io request specified more data than is returned by the 141 * target device (mode pages, inquiry data, etc.). The completion routine 142 * will handle this case to get the actual number of bytes transferred. 143 */ 144 SCI_SUCCESS_IO_DONE_EARLY, 145 146 /** 147 * This member indicates that the object for which a state change is 148 * being requested is already in said state. 149 */ 150 SCI_WARNING_ALREADY_IN_STATE, 151 152 /** 153 * This member indicates interrupt coalescence timer may cause SAS 154 * specification compliance issues (i.e. SMP target mode response 155 * frames must be returned within 1.9 milliseconds). 156 */ 157 SCI_WARNING_TIMER_CONFLICT, 158 159 /** 160 * This field indicates a sequence of action is not completed yet. Mostly, 161 * this status is used when multiple ATA commands are needed in a SATI translation. 162 */ 163 SCI_WARNING_SEQUENCE_INCOMPLETE, 164 165 /** 166 * This member indicates that there was a general failure. 167 */ 168 SCI_FAILURE, 169 170 /** 171 * This member indicates that the SCI implementation is unable to complete 172 * an operation due to a critical flaw the prevents any further operation 173 * (i.e. an invalid pointer). 174 */ 175 SCI_FATAL_ERROR, 176 177 /** 178 * This member indicates the calling function failed, because the state 179 * of the controller is in a state that prevents successful completion. 180 */ 181 SCI_FAILURE_INVALID_STATE, 182 183 /** 184 * This member indicates the calling function failed, because there is 185 * insufficient resources/memory to complete the request. 186 */ 187 SCI_FAILURE_INSUFFICIENT_RESOURCES, 188 189 /** 190 * This member indicates the calling function failed, because the 191 * controller object required for the operation can't be located. 192 */ 193 SCI_FAILURE_CONTROLLER_NOT_FOUND, 194 195 /** 196 * This member indicates the calling function failed, because the 197 * discovered controller type is not supported by the library. 198 */ 199 SCI_FAILURE_UNSUPPORTED_CONTROLLER_TYPE, 200 201 /** 202 * This member indicates the calling function failed, because the 203 * requested initialization data version isn't supported. 204 */ 205 SCI_FAILURE_UNSUPPORTED_INIT_DATA_VERSION, 206 207 /** 208 * This member indicates the calling function failed, because the 209 * requested configuration of SAS Phys into SAS Ports is not supported. 210 */ 211 SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION, 212 213 /** 214 * This member indicates the calling function failed, because the 215 * requested protocol is not supported by the remote device, port, 216 * or controller. 217 */ 218 SCI_FAILURE_UNSUPPORTED_PROTOCOL, 219 220 /** 221 * This member indicates the calling function failed, because the 222 * requested information type is not supported by the SCI implementation. 223 */ 224 SCI_FAILURE_UNSUPPORTED_INFORMATION_TYPE, 225 226 /** 227 * This member indicates the calling function failed, because the 228 * device already exists. 229 */ 230 SCI_FAILURE_DEVICE_EXISTS, 231 232 /** 233 * This member indicates the calling function failed, because adding 234 * a phy to the object is not possible. 235 */ 236 SCI_FAILURE_ADDING_PHY_UNSUPPORTED, 237 238 /** 239 * This member indicates the calling function failed, because the 240 * requested information type is not supported by the SCI implementation. 241 */ 242 SCI_FAILURE_UNSUPPORTED_INFORMATION_FIELD, 243 244 /** 245 * This member indicates the calling function failed, because the SCI 246 * implementation does not support the supplied time limit. 247 */ 248 SCI_FAILURE_UNSUPPORTED_TIME_LIMIT, 249 250 /** 251 * This member indicates the calling method failed, because the SCI 252 * implementation does not contain the specified Phy. 253 */ 254 SCI_FAILURE_INVALID_PHY, 255 256 /** 257 * This member indicates the calling method failed, because the SCI 258 * implementation does not contain the specified Port. 259 */ 260 SCI_FAILURE_INVALID_PORT, 261 262 /** 263 * This member indicates the calling method was partly successful 264 * The port was reset but not all phys in port are operational 265 */ 266 SCI_FAILURE_RESET_PORT_PARTIAL_SUCCESS, 267 268 /** 269 * This member indicates that calling method failed 270 * The port reset did not complete because none of the phys are operational 271 */ 272 SCI_FAILURE_RESET_PORT_FAILURE, 273 274 /** 275 * This member indicates the calling method failed, because the SCI 276 * implementation does not contain the specified remote device. 277 */ 278 SCI_FAILURE_INVALID_REMOTE_DEVICE, 279 280 /** 281 * This member indicates the calling method failed, because the remote 282 * device is in a bad state and requires a reset. 283 */ 284 SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED, 285 286 /** 287 * This member indicates the calling method failed, because the SCI 288 * implementation does not contain or support the specified IO tag. 289 */ 290 SCI_FAILURE_INVALID_IO_TAG, 291 292 /** 293 * This member indicates that the operation failed and the user should 294 * check the response data associated with the IO. 295 */ 296 SCI_FAILURE_IO_RESPONSE_VALID, 297 298 /** 299 * This member indicates that the operation failed, the failure is 300 * controller implementation specific, and the response data associated 301 * with the request is not valid. You can query for the controller 302 * specific error information via sci_controller_get_request_status() 303 */ 304 SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR, 305 306 /** 307 * This member indicated that the operation failed because the 308 * user requested this IO to be terminated. 309 */ 310 SCI_FAILURE_IO_TERMINATED, 311 312 /** 313 * This member indicates that the operation failed and the associated 314 * request requires a SCSI abort task to be sent to the target. 315 */ 316 SCI_FAILURE_IO_REQUIRES_SCSI_ABORT, 317 318 /** 319 * This member indicates that the operation failed because the supplied 320 * device could not be located. 321 */ 322 SCI_FAILURE_DEVICE_NOT_FOUND, 323 324 /** 325 * This member indicates that the operation failed because the 326 * objects association is required and is not correctly set. 327 */ 328 SCI_FAILURE_INVALID_ASSOCIATION, 329 330 /** 331 * This member indicates that the operation failed, because a timeout 332 * occurred. 333 */ 334 SCI_FAILURE_TIMEOUT, 335 336 /** 337 * This member indicates that the operation failed, because the user 338 * specified a value that is either invalid or not supported. 339 */ 340 SCI_FAILURE_INVALID_PARAMETER_VALUE, 341 342 /** 343 * This value indicates that the operation failed, because the number 344 * of messages (MSI-X) is not supported. 345 */ 346 SCI_FAILURE_UNSUPPORTED_MESSAGE_COUNT, 347 348 /** 349 * This value indicates that the method failed due to a lack of 350 * available NCQ tags. 351 */ 352 SCI_FAILURE_NO_NCQ_TAG_AVAILABLE, 353 354 /** 355 * This value indicates that a protocol violation has occurred on the 356 * link. 357 */ 358 SCI_FAILURE_PROTOCOL_VIOLATION, 359 360 /** 361 * This value indicates a failure condition that retry may help to clear. 362 */ 363 SCI_FAILURE_RETRY_REQUIRED, 364 365 /** 366 * This field indicates the retry limit was reached when a retry is attempted 367 */ 368 SCI_FAILURE_RETRY_LIMIT_REACHED, 369 370 /** 371 * This member indicates the calling method was partly successful. 372 * Mostly, this status is used when a LUN_RESET issued to an expander attached 373 * STP device in READY NCQ substate needs to have RNC suspended/resumed 374 * before posting TC. 375 */ 376 SCI_FAILURE_RESET_DEVICE_PARTIAL_SUCCESS, 377 378 /** 379 * This field indicates an illegal phy connection based on the routing attribute 380 * of both expander phy attached to each other. 381 */ 382 SCI_FAILURE_ILLEGAL_ROUTING_ATTRIBUTE_CONFIGURATION, 383 384 /** 385 * This field indicates a CONFIG ROUTE INFO command has a response with function result 386 * INDEX DOES NOT EXIST, usually means exceeding max route index. 387 */ 388 SCI_FAILURE_EXCEED_MAX_ROUTE_INDEX, 389 390 /** 391 * This value indicates that an unsupported PCI device ID has been 392 * specified. This indicates that attempts to invoke 393 * sci_library_allocate_controller() will fail. 394 */ 395 SCI_FAILURE_UNSUPPORTED_PCI_DEVICE_ID 396 397}; 398 399/** 400 * enum sci_io_status - This enumeration depicts all of the possible IO 401 * completion status values. Each value in this enumeration maps directly 402 * to a value in the enum sci_status enumeration. Please refer to that 403 * enumeration for detailed comments concerning what the status represents. 404 * 405 * Add the API to retrieve the SCU status from the core. Check to see that the 406 * following status are properly handled: - SCI_IO_FAILURE_UNSUPPORTED_PROTOCOL 407 * - SCI_IO_FAILURE_INVALID_IO_TAG 408 */ 409enum sci_io_status { 410 SCI_IO_SUCCESS = SCI_SUCCESS, 411 SCI_IO_FAILURE = SCI_FAILURE, 412 SCI_IO_SUCCESS_COMPLETE_BEFORE_START = SCI_SUCCESS_IO_COMPLETE_BEFORE_START, 413 SCI_IO_SUCCESS_IO_DONE_EARLY = SCI_SUCCESS_IO_DONE_EARLY, 414 SCI_IO_FAILURE_INVALID_STATE = SCI_FAILURE_INVALID_STATE, 415 SCI_IO_FAILURE_INSUFFICIENT_RESOURCES = SCI_FAILURE_INSUFFICIENT_RESOURCES, 416 SCI_IO_FAILURE_UNSUPPORTED_PROTOCOL = SCI_FAILURE_UNSUPPORTED_PROTOCOL, 417 SCI_IO_FAILURE_RESPONSE_VALID = SCI_FAILURE_IO_RESPONSE_VALID, 418 SCI_IO_FAILURE_CONTROLLER_SPECIFIC_ERR = SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR, 419 SCI_IO_FAILURE_TERMINATED = SCI_FAILURE_IO_TERMINATED, 420 SCI_IO_FAILURE_REQUIRES_SCSI_ABORT = SCI_FAILURE_IO_REQUIRES_SCSI_ABORT, 421 SCI_IO_FAILURE_INVALID_PARAMETER_VALUE = SCI_FAILURE_INVALID_PARAMETER_VALUE, 422 SCI_IO_FAILURE_NO_NCQ_TAG_AVAILABLE = SCI_FAILURE_NO_NCQ_TAG_AVAILABLE, 423 SCI_IO_FAILURE_PROTOCOL_VIOLATION = SCI_FAILURE_PROTOCOL_VIOLATION, 424 425 SCI_IO_FAILURE_REMOTE_DEVICE_RESET_REQUIRED = SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED, 426 427 SCI_IO_FAILURE_RETRY_REQUIRED = SCI_FAILURE_RETRY_REQUIRED, 428 SCI_IO_FAILURE_RETRY_LIMIT_REACHED = SCI_FAILURE_RETRY_LIMIT_REACHED, 429 SCI_IO_FAILURE_INVALID_REMOTE_DEVICE = SCI_FAILURE_INVALID_REMOTE_DEVICE 430}; 431 432/** 433 * enum sci_task_status - This enumeration depicts all of the possible task 434 * completion status values. Each value in this enumeration maps directly 435 * to a value in the enum sci_status enumeration. Please refer to that 436 * enumeration for detailed comments concerning what the status represents. 437 * 438 * Check to see that the following status are properly handled: 439 */ 440enum sci_task_status { 441 SCI_TASK_SUCCESS = SCI_SUCCESS, 442 SCI_TASK_FAILURE = SCI_FAILURE, 443 SCI_TASK_FAILURE_INVALID_STATE = SCI_FAILURE_INVALID_STATE, 444 SCI_TASK_FAILURE_INSUFFICIENT_RESOURCES = SCI_FAILURE_INSUFFICIENT_RESOURCES, 445 SCI_TASK_FAILURE_UNSUPPORTED_PROTOCOL = SCI_FAILURE_UNSUPPORTED_PROTOCOL, 446 SCI_TASK_FAILURE_INVALID_TAG = SCI_FAILURE_INVALID_IO_TAG, 447 SCI_TASK_FAILURE_RESPONSE_VALID = SCI_FAILURE_IO_RESPONSE_VALID, 448 SCI_TASK_FAILURE_CONTROLLER_SPECIFIC_ERR = SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR, 449 SCI_TASK_FAILURE_TERMINATED = SCI_FAILURE_IO_TERMINATED, 450 SCI_TASK_FAILURE_INVALID_PARAMETER_VALUE = SCI_FAILURE_INVALID_PARAMETER_VALUE, 451 452 SCI_TASK_FAILURE_REMOTE_DEVICE_RESET_REQUIRED = SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED, 453 SCI_TASK_FAILURE_RESET_DEVICE_PARTIAL_SUCCESS = SCI_FAILURE_RESET_DEVICE_PARTIAL_SUCCESS 454 455}; 456 457/** 458 * sci_swab32_cpy - convert between scsi and scu-hardware byte format 459 * @dest: receive the 4-byte endian swapped version of src 460 * @src: word aligned source buffer 461 * 462 * scu hardware handles SSP/SMP control, response, and unidentified 463 * frames in "big endian dword" order. Regardless of host endian this 464 * is always a swab32()-per-dword conversion of the standard definition, 465 * i.e. single byte fields swapped and multi-byte fields in little- 466 * endian 467 */ 468static inline void sci_swab32_cpy(void *_dest, void *_src, ssize_t word_cnt) 469{ 470 u32 *dest = _dest, *src = _src; 471 472 while (--word_cnt >= 0) 473 dest[word_cnt] = swab32(src[word_cnt]); 474} 475 476extern unsigned char no_outbound_task_to; 477extern u16 ssp_max_occ_to; 478extern u16 stp_max_occ_to; 479extern u16 ssp_inactive_to; 480extern u16 stp_inactive_to; 481extern unsigned char phy_gen; 482extern unsigned char max_concurr_spinup; 483extern uint cable_selection_override; 484 485irqreturn_t isci_msix_isr(int vec, void *data); 486irqreturn_t isci_intx_isr(int vec, void *data); 487irqreturn_t isci_error_isr(int vec, void *data); 488 489/* 490 * Each timer is associated with a cancellation flag that is set when 491 * del_timer() is called and checked in the timer callback function. This 492 * is needed since del_timer_sync() cannot be called with sci_lock held. 493 * For deinit however, del_timer_sync() is used without holding the lock. 494 */ 495struct sci_timer { 496 struct timer_list timer; 497 bool cancel; 498}; 499 500static inline 501void sci_init_timer(struct sci_timer *tmr, void (*fn)(struct timer_list *t)) 502{ 503 tmr->cancel = 0; 504 timer_setup(&tmr->timer, fn, 0); 505} 506 507static inline void sci_mod_timer(struct sci_timer *tmr, unsigned long msec) 508{ 509 tmr->cancel = 0; 510 mod_timer(&tmr->timer, jiffies + msecs_to_jiffies(msec)); 511} 512 513static inline void sci_del_timer(struct sci_timer *tmr) 514{ 515 tmr->cancel = 1; 516 del_timer(&tmr->timer); 517} 518 519struct sci_base_state_machine { 520 const struct sci_base_state *state_table; 521 u32 initial_state_id; 522 u32 current_state_id; 523 u32 previous_state_id; 524}; 525 526typedef void (*sci_state_transition_t)(struct sci_base_state_machine *sm); 527 528struct sci_base_state { 529 sci_state_transition_t enter_state; /* Called on state entry */ 530 sci_state_transition_t exit_state; /* Called on state exit */ 531}; 532 533extern void sci_init_sm(struct sci_base_state_machine *sm, 534 const struct sci_base_state *state_table, 535 u32 initial_state); 536extern void sci_change_state(struct sci_base_state_machine *sm, u32 next_state); 537#endif /* __ISCI_H__ */ 538