linux/arch/mips/include/asm/octeon/cvmx-pko.h
<<
>>
Prefs
   1/***********************license start***************
   2 * Author: Cavium Networks
   3 *
   4 * Contact: support@caviumnetworks.com
   5 * This file is part of the OCTEON SDK
   6 *
   7 * Copyright (c) 2003-2008 Cavium Networks
   8 *
   9 * This file is free software; you can redistribute it and/or modify
  10 * it under the terms of the GNU General Public License, Version 2, as
  11 * published by the Free Software Foundation.
  12 *
  13 * This file is distributed in the hope that it will be useful, but
  14 * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
  15 * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
  16 * NONINFRINGEMENT.  See the GNU General Public License for more
  17 * details.
  18 *
  19 * You should have received a copy of the GNU General Public License
  20 * along with this file; if not, write to the Free Software
  21 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
  22 * or visit http://www.gnu.org/licenses/.
  23 *
  24 * This file may also be available under a different license from Cavium.
  25 * Contact Cavium Networks for more information
  26 ***********************license end**************************************/
  27
  28/**
  29 *
  30 * Interface to the hardware Packet Output unit.
  31 *
  32 * Starting with SDK 1.7.0, the PKO output functions now support
  33 * two types of locking. CVMX_PKO_LOCK_ATOMIC_TAG continues to
  34 * function similarly to previous SDKs by using POW atomic tags
  35 * to preserve ordering and exclusivity. As a new option, you
  36 * can now pass CVMX_PKO_LOCK_CMD_QUEUE which uses a ll/sc
  37 * memory based locking instead. This locking has the advantage
  38 * of not affecting the tag state but doesn't preserve packet
  39 * ordering. CVMX_PKO_LOCK_CMD_QUEUE is appropriate in most
  40 * generic code while CVMX_PKO_LOCK_CMD_QUEUE should be used
  41 * with hand tuned fast path code.
  42 *
  43 * Some of other SDK differences visible to the command command
  44 * queuing:
  45 * - PKO indexes are no longer stored in the FAU. A large
  46 *   percentage of the FAU register block used to be tied up
  47 *   maintaining PKO queue pointers. These are now stored in a
  48 *   global named block.
  49 * - The PKO <b>use_locking</b> parameter can now have a global
  50 *   effect. Since all application use the same named block,
  51 *   queue locking correctly applies across all operating
  52 *   systems when using CVMX_PKO_LOCK_CMD_QUEUE.
  53 * - PKO 3 word commands are now supported. Use
  54 *   cvmx_pko_send_packet_finish3().
  55 *
  56 */
  57
  58#ifndef __CVMX_PKO_H__
  59#define __CVMX_PKO_H__
  60
  61#include <asm/octeon/cvmx-fpa.h>
  62#include <asm/octeon/cvmx-pow.h>
  63#include <asm/octeon/cvmx-cmd-queue.h>
  64#include <asm/octeon/cvmx-pko-defs.h>
  65
  66/* Adjust the command buffer size by 1 word so that in the case of using only
  67 * two word PKO commands no command words stradle buffers.  The useful values
  68 * for this are 0 and 1. */
  69#define CVMX_PKO_COMMAND_BUFFER_SIZE_ADJUST (1)
  70
  71#define CVMX_PKO_MAX_OUTPUT_QUEUES_STATIC 256
  72#define CVMX_PKO_MAX_OUTPUT_QUEUES      ((OCTEON_IS_MODEL(OCTEON_CN31XX) || \
  73        OCTEON_IS_MODEL(OCTEON_CN3010) || OCTEON_IS_MODEL(OCTEON_CN3005) || \
  74        OCTEON_IS_MODEL(OCTEON_CN50XX)) ? 32 : \
  75                (OCTEON_IS_MODEL(OCTEON_CN58XX) || \
  76                OCTEON_IS_MODEL(OCTEON_CN56XX)) ? 256 : 128)
  77#define CVMX_PKO_NUM_OUTPUT_PORTS       40
  78/* use this for queues that are not used */
  79#define CVMX_PKO_MEM_QUEUE_PTRS_ILLEGAL_PID 63
  80#define CVMX_PKO_QUEUE_STATIC_PRIORITY  9
  81#define CVMX_PKO_ILLEGAL_QUEUE  0xFFFF
  82#define CVMX_PKO_MAX_QUEUE_DEPTH 0
  83
  84typedef enum {
  85        CVMX_PKO_SUCCESS,
  86        CVMX_PKO_INVALID_PORT,
  87        CVMX_PKO_INVALID_QUEUE,
  88        CVMX_PKO_INVALID_PRIORITY,
  89        CVMX_PKO_NO_MEMORY,
  90        CVMX_PKO_PORT_ALREADY_SETUP,
  91        CVMX_PKO_CMD_QUEUE_INIT_ERROR
  92} cvmx_pko_status_t;
  93
  94/**
  95 * This enumeration represents the differnet locking modes supported by PKO.
  96 */
  97typedef enum {
  98        /*
  99         * PKO doesn't do any locking. It is the responsibility of the
 100         * application to make sure that no other core is accessing
 101         * the same queue at the same time
 102         */
 103        CVMX_PKO_LOCK_NONE = 0,
 104        /*
 105         * PKO performs an atomic tagswitch to insure exclusive access
 106         * to the output queue. This will maintain packet ordering on
 107         * output.
 108         */
 109        CVMX_PKO_LOCK_ATOMIC_TAG = 1,
 110        /*
 111         * PKO uses the common command queue locks to insure exclusive
 112         * access to the output queue. This is a memory based
 113         * ll/sc. This is the most portable locking mechanism.
 114         */
 115        CVMX_PKO_LOCK_CMD_QUEUE = 2,
 116} cvmx_pko_lock_t;
 117
 118typedef struct {
 119        uint32_t packets;
 120        uint64_t octets;
 121        uint64_t doorbell;
 122} cvmx_pko_port_status_t;
 123
 124/**
 125 * This structure defines the address to use on a packet enqueue
 126 */
 127typedef union {
 128        uint64_t u64;
 129        struct {
 130#ifdef __BIG_ENDIAN_BITFIELD
 131                /* Must CVMX_IO_SEG */
 132                uint64_t mem_space:2;
 133                /* Must be zero */
 134                uint64_t reserved:13;
 135                /* Must be one */
 136                uint64_t is_io:1;
 137                /* The ID of the device on the non-coherent bus */
 138                uint64_t did:8;
 139                /* Must be zero */
 140                uint64_t reserved2:4;
 141                /* Must be zero */
 142                uint64_t reserved3:18;
 143                /*
 144                 * The hardware likes to have the output port in
 145                 * addition to the output queue,
 146                 */
 147                uint64_t port:6;
 148                /*
 149                 * The output queue to send the packet to (0-127 are
 150                 * legal)
 151                 */
 152                uint64_t queue:9;
 153                /* Must be zero */
 154                uint64_t reserved4:3;
 155#else
 156                uint64_t reserved4:3;
 157                uint64_t queue:9;
 158                uint64_t port:9;
 159                uint64_t reserved3:15;
 160                uint64_t reserved2:4;
 161                uint64_t did:8;
 162                uint64_t is_io:1;
 163                uint64_t reserved:13;
 164                uint64_t mem_space:2;
 165#endif
 166        } s;
 167} cvmx_pko_doorbell_address_t;
 168
 169/**
 170 * Structure of the first packet output command word.
 171 */
 172typedef union {
 173        uint64_t u64;
 174        struct {
 175#ifdef __BIG_ENDIAN_BITFIELD
 176                /*
 177                 * The size of the reg1 operation - could be 8, 16,
 178                 * 32, or 64 bits.
 179                 */
 180                uint64_t size1:2;
 181                /*
 182                 * The size of the reg0 operation - could be 8, 16,
 183                 * 32, or 64 bits.
 184                 */
 185                uint64_t size0:2;
 186                /*
 187                 * If set, subtract 1, if clear, subtract packet
 188                 * size.
 189                 */
 190                uint64_t subone1:1;
 191                /*
 192                 * The register, subtract will be done if reg1 is
 193                 * non-zero.
 194                 */
 195                uint64_t reg1:11;
 196                /* If set, subtract 1, if clear, subtract packet size */
 197                uint64_t subone0:1;
 198                /* The register, subtract will be done if reg0 is non-zero */
 199                uint64_t reg0:11;
 200                /*
 201                 * When set, interpret segment pointer and segment
 202                 * bytes in little endian order.
 203                 */
 204                uint64_t le:1;
 205                /*
 206                 * When set, packet data not allocated in L2 cache by
 207                 * PKO.
 208                 */
 209                uint64_t n2:1;
 210                /*
 211                 * If set and rsp is set, word3 contains a pointer to
 212                 * a work queue entry.
 213                 */
 214                uint64_t wqp:1;
 215                /* If set, the hardware will send a response when done */
 216                uint64_t rsp:1;
 217                /*
 218                 * If set, the supplied pkt_ptr is really a pointer to
 219                 * a list of pkt_ptr's.
 220                 */
 221                uint64_t gather:1;
 222                /*
 223                 * If ipoffp1 is non zero, (ipoffp1-1) is the number
 224                 * of bytes to IP header, and the hardware will
 225                 * calculate and insert the UDP/TCP checksum.
 226                 */
 227                uint64_t ipoffp1:7;
 228                /*
 229                 * If set, ignore the I bit (force to zero) from all
 230                 * pointer structures.
 231                 */
 232                uint64_t ignore_i:1;
 233                /*
 234                 * If clear, the hardware will attempt to free the
 235                 * buffers containing the packet.
 236                 */
 237                uint64_t dontfree:1;
 238                /*
 239                 * The total number of segs in the packet, if gather
 240                 * set, also gather list length.
 241                 */
 242                uint64_t segs:6;
 243                /* Including L2, but no trailing CRC */
 244                uint64_t total_bytes:16;
 245#else
 246                uint64_t total_bytes:16;
 247                uint64_t segs:6;
 248                uint64_t dontfree:1;
 249                uint64_t ignore_i:1;
 250                uint64_t ipoffp1:7;
 251                uint64_t gather:1;
 252                uint64_t rsp:1;
 253                uint64_t wqp:1;
 254                uint64_t n2:1;
 255                uint64_t le:1;
 256                uint64_t reg0:11;
 257                uint64_t subone0:1;
 258                uint64_t reg1:11;
 259                uint64_t subone1:1;
 260                uint64_t size0:2;
 261                uint64_t size1:2;
 262#endif
 263        } s;
 264} cvmx_pko_command_word0_t;
 265
 266/* CSR typedefs have been moved to cvmx-csr-*.h */
 267
 268/**
 269 * Definition of internal state for Packet output processing
 270 */
 271typedef struct {
 272        /* ptr to start of buffer, offset kept in FAU reg */
 273        uint64_t *start_ptr;
 274} cvmx_pko_state_elem_t;
 275
 276/**
 277 * Call before any other calls to initialize the packet
 278 * output system.
 279 */
 280extern void cvmx_pko_initialize_global(void);
 281extern int cvmx_pko_initialize_local(void);
 282
 283/**
 284 * Enables the packet output hardware. It must already be
 285 * configured.
 286 */
 287extern void cvmx_pko_enable(void);
 288
 289/**
 290 * Disables the packet output. Does not affect any configuration.
 291 */
 292extern void cvmx_pko_disable(void);
 293
 294/**
 295 * Shutdown and free resources required by packet output.
 296 */
 297
 298extern void cvmx_pko_shutdown(void);
 299
 300/**
 301 * Configure a output port and the associated queues for use.
 302 *
 303 * @port:       Port to configure.
 304 * @base_queue: First queue number to associate with this port.
 305 * @num_queues: Number of queues t oassociate with this port
 306 * @priority:   Array of priority levels for each queue. Values are
 307 *                   allowed to be 1-8. A value of 8 get 8 times the traffic
 308 *                   of a value of 1. There must be num_queues elements in the
 309 *                   array.
 310 */
 311extern cvmx_pko_status_t cvmx_pko_config_port(uint64_t port,
 312                                              uint64_t base_queue,
 313                                              uint64_t num_queues,
 314                                              const uint64_t priority[]);
 315
 316/**
 317 * Ring the packet output doorbell. This tells the packet
 318 * output hardware that "len" command words have been added
 319 * to its pending list.  This command includes the required
 320 * CVMX_SYNCWS before the doorbell ring.
 321 *
 322 * @port:   Port the packet is for
 323 * @queue:  Queue the packet is for
 324 * @len:    Length of the command in 64 bit words
 325 */
 326static inline void cvmx_pko_doorbell(uint64_t port, uint64_t queue,
 327                                     uint64_t len)
 328{
 329        cvmx_pko_doorbell_address_t ptr;
 330
 331        ptr.u64 = 0;
 332        ptr.s.mem_space = CVMX_IO_SEG;
 333        ptr.s.did = CVMX_OCT_DID_PKT_SEND;
 334        ptr.s.is_io = 1;
 335        ptr.s.port = port;
 336        ptr.s.queue = queue;
 337        /*
 338         * Need to make sure output queue data is in DRAM before
 339         * doorbell write.
 340         */
 341        CVMX_SYNCWS;
 342        cvmx_write_io(ptr.u64, len);
 343}
 344
 345/**
 346 * Prepare to send a packet.  This may initiate a tag switch to
 347 * get exclusive access to the output queue structure, and
 348 * performs other prep work for the packet send operation.
 349 *
 350 * cvmx_pko_send_packet_finish() MUST be called after this function is called,
 351 * and must be called with the same port/queue/use_locking arguments.
 352 *
 353 * The use_locking parameter allows the caller to use three
 354 * possible locking modes.
 355 * - CVMX_PKO_LOCK_NONE
 356 *      - PKO doesn't do any locking. It is the responsibility
 357 *          of the application to make sure that no other core
 358 *          is accessing the same queue at the same time.
 359 * - CVMX_PKO_LOCK_ATOMIC_TAG
 360 *      - PKO performs an atomic tagswitch to insure exclusive
 361 *          access to the output queue. This will maintain
 362 *          packet ordering on output.
 363 * - CVMX_PKO_LOCK_CMD_QUEUE
 364 *      - PKO uses the common command queue locks to insure
 365 *          exclusive access to the output queue. This is a
 366 *          memory based ll/sc. This is the most portable
 367 *          locking mechanism.
 368 *
 369 * NOTE: If atomic locking is used, the POW entry CANNOT be
 370 * descheduled, as it does not contain a valid WQE pointer.
 371 *
 372 * @port:   Port to send it on
 373 * @queue:  Queue to use
 374 * @use_locking: CVMX_PKO_LOCK_NONE, CVMX_PKO_LOCK_ATOMIC_TAG, or
 375 *               CVMX_PKO_LOCK_CMD_QUEUE
 376 */
 377
 378static inline void cvmx_pko_send_packet_prepare(uint64_t port, uint64_t queue,
 379                                                cvmx_pko_lock_t use_locking)
 380{
 381        if (use_locking == CVMX_PKO_LOCK_ATOMIC_TAG) {
 382                /*
 383                 * Must do a full switch here to handle all cases.  We
 384                 * use a fake WQE pointer, as the POW does not access
 385                 * this memory.  The WQE pointer and group are only
 386                 * used if this work is descheduled, which is not
 387                 * supported by the
 388                 * cvmx_pko_send_packet_prepare/cvmx_pko_send_packet_finish
 389                 * combination.  Note that this is a special case in
 390                 * which these fake values can be used - this is not a
 391                 * general technique.
 392                 */
 393                uint32_t tag =
 394                    CVMX_TAG_SW_BITS_INTERNAL << CVMX_TAG_SW_SHIFT |
 395                    CVMX_TAG_SUBGROUP_PKO << CVMX_TAG_SUBGROUP_SHIFT |
 396                    (CVMX_TAG_SUBGROUP_MASK & queue);
 397                cvmx_pow_tag_sw_full((cvmx_wqe_t *) cvmx_phys_to_ptr(0x80), tag,
 398                                     CVMX_POW_TAG_TYPE_ATOMIC, 0);
 399        }
 400}
 401
 402/**
 403 * Complete packet output. cvmx_pko_send_packet_prepare() must be
 404 * called exactly once before this, and the same parameters must be
 405 * passed to both cvmx_pko_send_packet_prepare() and
 406 * cvmx_pko_send_packet_finish().
 407 *
 408 * @port:   Port to send it on
 409 * @queue:  Queue to use
 410 * @pko_command:
 411 *               PKO HW command word
 412 * @packet: Packet to send
 413 * @use_locking: CVMX_PKO_LOCK_NONE, CVMX_PKO_LOCK_ATOMIC_TAG, or
 414 *               CVMX_PKO_LOCK_CMD_QUEUE
 415 *
 416 * Returns returns CVMX_PKO_SUCCESS on success, or error code on
 417 * failure of output
 418 */
 419static inline cvmx_pko_status_t cvmx_pko_send_packet_finish(
 420        uint64_t port,
 421        uint64_t queue,
 422        cvmx_pko_command_word0_t pko_command,
 423        union cvmx_buf_ptr packet,
 424        cvmx_pko_lock_t use_locking)
 425{
 426        cvmx_cmd_queue_result_t result;
 427        if (use_locking == CVMX_PKO_LOCK_ATOMIC_TAG)
 428                cvmx_pow_tag_sw_wait();
 429        result = cvmx_cmd_queue_write2(CVMX_CMD_QUEUE_PKO(queue),
 430                                       (use_locking == CVMX_PKO_LOCK_CMD_QUEUE),
 431                                       pko_command.u64, packet.u64);
 432        if (likely(result == CVMX_CMD_QUEUE_SUCCESS)) {
 433                cvmx_pko_doorbell(port, queue, 2);
 434                return CVMX_PKO_SUCCESS;
 435        } else if ((result == CVMX_CMD_QUEUE_NO_MEMORY)
 436                   || (result == CVMX_CMD_QUEUE_FULL)) {
 437                return CVMX_PKO_NO_MEMORY;
 438        } else {
 439                return CVMX_PKO_INVALID_QUEUE;
 440        }
 441}
 442
 443/**
 444 * Complete packet output. cvmx_pko_send_packet_prepare() must be
 445 * called exactly once before this, and the same parameters must be
 446 * passed to both cvmx_pko_send_packet_prepare() and
 447 * cvmx_pko_send_packet_finish().
 448 *
 449 * @port:   Port to send it on
 450 * @queue:  Queue to use
 451 * @pko_command:
 452 *               PKO HW command word
 453 * @packet: Packet to send
 454 * @addr: Plysical address of a work queue entry or physical address
 455 *        to zero on complete.
 456 * @use_locking: CVMX_PKO_LOCK_NONE, CVMX_PKO_LOCK_ATOMIC_TAG, or
 457 *               CVMX_PKO_LOCK_CMD_QUEUE
 458 *
 459 * Returns returns CVMX_PKO_SUCCESS on success, or error code on
 460 * failure of output
 461 */
 462static inline cvmx_pko_status_t cvmx_pko_send_packet_finish3(
 463        uint64_t port,
 464        uint64_t queue,
 465        cvmx_pko_command_word0_t pko_command,
 466        union cvmx_buf_ptr packet,
 467        uint64_t addr,
 468        cvmx_pko_lock_t use_locking)
 469{
 470        cvmx_cmd_queue_result_t result;
 471        if (use_locking == CVMX_PKO_LOCK_ATOMIC_TAG)
 472                cvmx_pow_tag_sw_wait();
 473        result = cvmx_cmd_queue_write3(CVMX_CMD_QUEUE_PKO(queue),
 474                                       (use_locking == CVMX_PKO_LOCK_CMD_QUEUE),
 475                                       pko_command.u64, packet.u64, addr);
 476        if (likely(result == CVMX_CMD_QUEUE_SUCCESS)) {
 477                cvmx_pko_doorbell(port, queue, 3);
 478                return CVMX_PKO_SUCCESS;
 479        } else if ((result == CVMX_CMD_QUEUE_NO_MEMORY)
 480                   || (result == CVMX_CMD_QUEUE_FULL)) {
 481                return CVMX_PKO_NO_MEMORY;
 482        } else {
 483                return CVMX_PKO_INVALID_QUEUE;
 484        }
 485}
 486
 487/**
 488 * Return the pko output queue associated with a port and a specific core.
 489 * In normal mode (PKO lockless operation is disabled), the value returned
 490 * is the base queue.
 491 *
 492 * @port:   Port number
 493 * @core:   Core to get queue for
 494 *
 495 * Returns Core-specific output queue
 496 */
 497static inline int cvmx_pko_get_base_queue_per_core(int port, int core)
 498{
 499#ifndef CVMX_HELPER_PKO_MAX_PORTS_INTERFACE0
 500#define CVMX_HELPER_PKO_MAX_PORTS_INTERFACE0 16
 501#endif
 502#ifndef CVMX_HELPER_PKO_MAX_PORTS_INTERFACE1
 503#define CVMX_HELPER_PKO_MAX_PORTS_INTERFACE1 16
 504#endif
 505
 506        if (port < CVMX_PKO_MAX_PORTS_INTERFACE0)
 507                return port * CVMX_PKO_QUEUES_PER_PORT_INTERFACE0 + core;
 508        else if (port >= 16 && port < 16 + CVMX_PKO_MAX_PORTS_INTERFACE1)
 509                return CVMX_PKO_MAX_PORTS_INTERFACE0 *
 510                    CVMX_PKO_QUEUES_PER_PORT_INTERFACE0 + (port -
 511                                                           16) *
 512                    CVMX_PKO_QUEUES_PER_PORT_INTERFACE1 + core;
 513        else if ((port >= 32) && (port < 36))
 514                return CVMX_PKO_MAX_PORTS_INTERFACE0 *
 515                    CVMX_PKO_QUEUES_PER_PORT_INTERFACE0 +
 516                    CVMX_PKO_MAX_PORTS_INTERFACE1 *
 517                    CVMX_PKO_QUEUES_PER_PORT_INTERFACE1 + (port -
 518                                                           32) *
 519                    CVMX_PKO_QUEUES_PER_PORT_PCI;
 520        else if ((port >= 36) && (port < 40))
 521                return CVMX_PKO_MAX_PORTS_INTERFACE0 *
 522                    CVMX_PKO_QUEUES_PER_PORT_INTERFACE0 +
 523                    CVMX_PKO_MAX_PORTS_INTERFACE1 *
 524                    CVMX_PKO_QUEUES_PER_PORT_INTERFACE1 +
 525                    4 * CVMX_PKO_QUEUES_PER_PORT_PCI + (port -
 526                                                        36) *
 527                    CVMX_PKO_QUEUES_PER_PORT_LOOP;
 528        else
 529                /* Given the limit on the number of ports we can map to
 530                 * CVMX_MAX_OUTPUT_QUEUES_STATIC queues (currently 256,
 531                 * divided among all cores), the remaining unmapped ports
 532                 * are assigned an illegal queue number */
 533                return CVMX_PKO_ILLEGAL_QUEUE;
 534}
 535
 536/**
 537 * For a given port number, return the base pko output queue
 538 * for the port.
 539 *
 540 * @port:   Port number
 541 * Returns Base output queue
 542 */
 543static inline int cvmx_pko_get_base_queue(int port)
 544{
 545        if (OCTEON_IS_MODEL(OCTEON_CN68XX))
 546                return port;
 547
 548        return cvmx_pko_get_base_queue_per_core(port, 0);
 549}
 550
 551/**
 552 * For a given port number, return the number of pko output queues.
 553 *
 554 * @port:   Port number
 555 * Returns Number of output queues
 556 */
 557static inline int cvmx_pko_get_num_queues(int port)
 558{
 559        if (port < 16)
 560                return CVMX_PKO_QUEUES_PER_PORT_INTERFACE0;
 561        else if (port < 32)
 562                return CVMX_PKO_QUEUES_PER_PORT_INTERFACE1;
 563        else if (port < 36)
 564                return CVMX_PKO_QUEUES_PER_PORT_PCI;
 565        else if (port < 40)
 566                return CVMX_PKO_QUEUES_PER_PORT_LOOP;
 567        else
 568                return 0;
 569}
 570
 571/**
 572 * Get the status counters for a port.
 573 *
 574 * @port_num: Port number to get statistics for.
 575 * @clear:    Set to 1 to clear the counters after they are read
 576 * @status:   Where to put the results.
 577 */
 578static inline void cvmx_pko_get_port_status(uint64_t port_num, uint64_t clear,
 579                                            cvmx_pko_port_status_t *status)
 580{
 581        union cvmx_pko_reg_read_idx pko_reg_read_idx;
 582        union cvmx_pko_mem_count0 pko_mem_count0;
 583        union cvmx_pko_mem_count1 pko_mem_count1;
 584
 585        pko_reg_read_idx.u64 = 0;
 586        pko_reg_read_idx.s.index = port_num;
 587        cvmx_write_csr(CVMX_PKO_REG_READ_IDX, pko_reg_read_idx.u64);
 588
 589        pko_mem_count0.u64 = cvmx_read_csr(CVMX_PKO_MEM_COUNT0);
 590        status->packets = pko_mem_count0.s.count;
 591        if (clear) {
 592                pko_mem_count0.s.count = port_num;
 593                cvmx_write_csr(CVMX_PKO_MEM_COUNT0, pko_mem_count0.u64);
 594        }
 595
 596        pko_mem_count1.u64 = cvmx_read_csr(CVMX_PKO_MEM_COUNT1);
 597        status->octets = pko_mem_count1.s.count;
 598        if (clear) {
 599                pko_mem_count1.s.count = port_num;
 600                cvmx_write_csr(CVMX_PKO_MEM_COUNT1, pko_mem_count1.u64);
 601        }
 602
 603        if (OCTEON_IS_MODEL(OCTEON_CN3XXX)) {
 604                union cvmx_pko_mem_debug9 debug9;
 605                pko_reg_read_idx.s.index = cvmx_pko_get_base_queue(port_num);
 606                cvmx_write_csr(CVMX_PKO_REG_READ_IDX, pko_reg_read_idx.u64);
 607                debug9.u64 = cvmx_read_csr(CVMX_PKO_MEM_DEBUG9);
 608                status->doorbell = debug9.cn38xx.doorbell;
 609        } else {
 610                union cvmx_pko_mem_debug8 debug8;
 611                pko_reg_read_idx.s.index = cvmx_pko_get_base_queue(port_num);
 612                cvmx_write_csr(CVMX_PKO_REG_READ_IDX, pko_reg_read_idx.u64);
 613                debug8.u64 = cvmx_read_csr(CVMX_PKO_MEM_DEBUG8);
 614                status->doorbell = debug8.cn58xx.doorbell;
 615        }
 616}
 617
 618/**
 619 * Rate limit a PKO port to a max packets/sec. This function is only
 620 * supported on CN57XX, CN56XX, CN55XX, and CN54XX.
 621 *
 622 * @port:      Port to rate limit
 623 * @packets_s: Maximum packet/sec
 624 * @burst:     Maximum number of packets to burst in a row before rate
 625 *                  limiting cuts in.
 626 *
 627 * Returns Zero on success, negative on failure
 628 */
 629extern int cvmx_pko_rate_limit_packets(int port, int packets_s, int burst);
 630
 631/**
 632 * Rate limit a PKO port to a max bits/sec. This function is only
 633 * supported on CN57XX, CN56XX, CN55XX, and CN54XX.
 634 *
 635 * @port:   Port to rate limit
 636 * @bits_s: PKO rate limit in bits/sec
 637 * @burst:  Maximum number of bits to burst before rate
 638 *               limiting cuts in.
 639 *
 640 * Returns Zero on success, negative on failure
 641 */
 642extern int cvmx_pko_rate_limit_bits(int port, uint64_t bits_s, int burst);
 643
 644#endif /* __CVMX_PKO_H__ */
 645