/*
 *      Pentium 4/Xeon CPU on demand clock modulation/speed scaling
 *      (C) 2002 - 2003 Dominik Brodowski <linux@brodo.de>
 *      (C) 2002 Zwane Mwaikambo <zwane@commfireservices.com>
 *      (C) 2002 Arjan van de Ven <arjanv@redhat.com>
 *      (C) 2002 Tora T. Engstad
 *      All Rights Reserved
 *
 *      This program is free software; you can redistribute it and/or
 *      modify it under the terms of the GNU General Public License
 *      as published by the Free Software Foundation; either version
 *      2 of the License, or (at your option) any later version.
 *
 *      The author(s) of this software shall not be held liable for damages
 *      of any nature resulting due to the use of this software. This
 *      software is provided AS-IS with no warranties.
 *
 *      Date            Errata                  Description
 *      20020525        N44, O17        12.5% or 25% DC causes lockup
 *
 */

#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt

#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/smp.h>
#include <linux/cpufreq.h>
#include <linux/cpumask.h>
#include <linux/timex.h>

#include <asm/processor.h>
#include <asm/msr.h>
#include <asm/timer.h>
#include <asm/cpu_device_id.h>

#include "speedstep-lib.h"

/*
 * Duty Cycle (3bits), note DC_DISABLE is not specified in
 * intel docs i just use it to mean disable
 */
enum {
        DC_RESV, DC_DFLT, DC_25PT, DC_38PT, DC_50PT,
        DC_64PT, DC_75PT, DC_88PT, DC_DISABLE
};

#define DC_ENTRIES      8


static int has_N44_O17_errata[NR_CPUS];
static unsigned int stock_freq;
static struct cpufreq_driver p4clockmod_driver;
static unsigned int cpufreq_p4_get(unsigned int cpu);

static int cpufreq_p4_setdc(unsigned int cpu, unsigned int newstate)
{
        u32 l, h;

        if ((newstate > DC_DISABLE) || (newstate == DC_RESV))
                return -EINVAL;

        rdmsr_on_cpu(cpu, MSR_IA32_THERM_STATUS, &l, &h);

        if (l & 0x01)
                pr_debug("CPU#%d currently thermal throttled\n", cpu);

        if (has_N44_O17_errata[cpu] &&
            (newstate == DC_25PT || newstate == DC_DFLT))
                newstate = DC_38PT;

        rdmsr_on_cpu(cpu, MSR_IA32_THERM_CONTROL, &l, &h);
        if (newstate == DC_DISABLE) {
                pr_debug("CPU#%d disabling modulation\n", cpu);
                wrmsr_on_cpu(cpu, MSR_IA32_THERM_CONTROL, l & ~(1<<4), h);
        } else {
                pr_debug("CPU#%d setting duty cycle to %d%%\n",
                        cpu, ((125 * newstate) / 10));
                /* bits 63 - 5  : reserved
                 * bit  4       : enable/disable
                 * bits 3-1     : duty cycle
                 * bit  0       : reserved
                 */
                l = (l & ~14);
                l = l | (1<<4) | ((newstate & 0x7)<<1);
                wrmsr_on_cpu(cpu, MSR_IA32_THERM_CONTROL, l, h);
        }

        return 0;
}


static struct cpufreq_frequency_table p4clockmod_table[] = {
        {0, DC_RESV, CPUFREQ_ENTRY_INVALID},
        {0, DC_DFLT, 0},
        {0, DC_25PT, 0},
        {0, DC_38PT, 0},
        {0, DC_50PT, 0},
        {0, DC_64PT, 0},
        {0, DC_75PT, 0},
        {0, DC_88PT, 0},
        {0, DC_DISABLE, 0},
        {0, DC_RESV, CPUFREQ_TABLE_END},
};


static int cpufreq_p4_target(struct cpufreq_policy *policy, unsigned int index)
{
        int i;

        /* run on each logical CPU,
         * see section 13.15.3 of IA32 Intel Architecture Software
         * Developer's Manual, Volume 3
         */
        for_each_cpu(i, policy->cpus)
                cpufreq_p4_setdc(i, p4clockmod_table[index].driver_data);

        return 0;
}


static unsigned int cpufreq_p4_get_frequency(struct cpuinfo_x86 *c)
{
        if (c->x86 == 0x06) {
                if (cpu_has(c, X86_FEATURE_EST))
                        pr_warn_once("Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition to frequency scaling. You should use that instead of p4-clockmod, if possible.\n");
                switch (c->x86_model) {
                case 0x0E: /* Core */
                case 0x0F: /* Core Duo */
                case 0x16: /* Celeron Core */
                case 0x1C: /* Atom */
                        p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS;
                        return speedstep_get_frequency(SPEEDSTEP_CPU_PCORE);
                case 0x0D: /* Pentium M (Dothan) */
                        p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS;
                        /* fall through */
                case 0x09: /* Pentium M (Banias) */
                        return speedstep_get_frequency(SPEEDSTEP_CPU_PM);
                }
        }

        if (c->x86 != 0xF)
                return 0;

        /* on P-4s, the TSC runs with constant frequency independent whether
         * throttling is active or not. */
        p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS;

        if (speedstep_detect_processor() == SPEEDSTEP_CPU_P4M) {
                pr_warn("Warning: Pentium 4-M detected. The speedstep-ich or acpi cpufreq modules offer voltage scaling in addition of frequency scaling. You should use either one instead of p4-clockmod, if possible.\n");
                return speedstep_get_frequency(SPEEDSTEP_CPU_P4M);
        }

        return speedstep_get_frequency(SPEEDSTEP_CPU_P4D);
}



static int cpufreq_p4_cpu_init(struct cpufreq_policy *policy)
{
        struct cpuinfo_x86 *c = &cpu_data(policy->cpu);
        int cpuid = 0;
        unsigned int i;

#ifdef CONFIG_SMP
        cpumask_copy(policy->cpus, topology_sibling_cpumask(policy->cpu));
#endif

        /* Errata workaround */
        cpuid = (c->x86 << 8) | (c->x86_model << 4) | c->x86_stepping;
        switch (cpuid) {
        case 0x0f07:
        case 0x0f0a:
        case 0x0f11:
        case 0x0f12:
                has_N44_O17_errata[policy->cpu] = 1;
                pr_debug("has errata -- disabling low frequencies\n");
        }

        if (speedstep_detect_processor() == SPEEDSTEP_CPU_P4D &&
            c->x86_model < 2) {
                /* switch to maximum frequency and measure result */
                cpufreq_p4_setdc(policy->cpu, DC_DISABLE);
                recalibrate_cpu_khz();
        }
        /* get max frequency */
        stock_freq = cpufreq_p4_get_frequency(c);
        if (!stock_freq)
                return -EINVAL;

        /* table init */
        for (i = 1; (p4clockmod_table[i].frequency != CPUFREQ_TABLE_END); i++) {
                if ((i < 2) && (has_N44_O17_errata[policy->cpu]))
                        p4clockmod_table[i].frequency = CPUFREQ_ENTRY_INVALID;
                else
                        p4clockmod_table[i].frequency = (stock_freq * i)/8;
        }

        /* cpuinfo and default policy values */

        /* the transition latency is set to be 1 higher than the maximum
         * transition latency of the ondemand governor */
        policy->cpuinfo.transition_latency = 10000001;
        policy->freq_table = &p4clockmod_table[0];

        return 0;
}


static unsigned int cpufreq_p4_get(unsigned int cpu)
{
        u32 l, h;

        rdmsr_on_cpu(cpu, MSR_IA32_THERM_CONTROL, &l, &h);

        if (l & 0x10) {
                l = l >> 1;
                l &= 0x7;
        } else
                l = DC_DISABLE;

        if (l != DC_DISABLE)
                return stock_freq * l / 8;

        return stock_freq;
}

static struct cpufreq_driver p4clockmod_driver = {
        .verify         = cpufreq_generic_frequency_table_verify,
        .target_index   = cpufreq_p4_target,
        .init           = cpufreq_p4_cpu_init,
        .get            = cpufreq_p4_get,
        .name           = "p4-clockmod",
        .attr           = cpufreq_generic_attr,
};

static const struct x86_cpu_id cpufreq_p4_id[] = {
        { X86_VENDOR_INTEL, X86_FAMILY_ANY, X86_MODEL_ANY, X86_FEATURE_ACC },
        {}
};

/*
 * Intentionally no MODULE_DEVICE_TABLE here: this driver should not
 * be auto loaded.  Please don't add one.
 */

static int __init cpufreq_p4_init(void)
{
        int ret;

        /*
         * THERM_CONTROL is architectural for IA32 now, so
         * we can rely on the capability checks
         */
        if (!x86_match_cpu(cpufreq_p4_id) || !boot_cpu_has(X86_FEATURE_ACPI))
                return -ENODEV;

        ret = cpufreq_register_driver(&p4clockmod_driver);
        if (!ret)
                pr_info("P4/Xeon(TM) CPU On-Demand Clock Modulation available\n");

        return ret;
}


static void __exit cpufreq_p4_exit(void)
{
        cpufreq_unregister_driver(&p4clockmod_driver);
}


MODULE_AUTHOR("Zwane Mwaikambo <zwane@commfireservices.com>");
MODULE_DESCRIPTION("cpufreq driver for Pentium(TM) 4/Xeon(TM)");
MODULE_LICENSE("GPL");

late_initcall(cpufreq_p4_init);
module_exit(cpufreq_p4_exit);