#
# Platform drivers
#       Most drivers here are currently for webcam support

menuconfig V4L_PLATFORM_DRIVERS
        bool "V4L platform devices"
        depends on MEDIA_CAMERA_SUPPORT
        default n
        ---help---
          Say Y here to enable support for platform-specific V4L drivers.

if V4L_PLATFORM_DRIVERS

source "drivers/media/platform/marvell-ccic/Kconfig"

config VIDEO_VIA_CAMERA
        tristate "VIAFB camera controller support"
        depends on FB_VIA
        select VIDEOBUF_DMA_SG
        select VIDEO_OV7670
        help
           Driver support for the integrated camera controller in VIA
           Chrome9 chipsets.  Currently only tested on OLPC xo-1.5 systems
           with ov7670 sensors.

#
# Platform multimedia device configuration
#
source "drivers/media/platform/cadence/Kconfig"

source "drivers/media/platform/davinci/Kconfig"

source "drivers/media/platform/omap/Kconfig"

config VIDEO_SH_VOU
        tristate "SuperH VOU video output driver"
        depends on MEDIA_CAMERA_SUPPORT
        depends on VIDEO_DEV && I2C
        depends on ARCH_SHMOBILE || COMPILE_TEST
        select VIDEOBUF2_DMA_CONTIG
        help
          Support for the Video Output Unit (VOU) on SuperH SoCs.

config VIDEO_VIU
        tristate "Freescale VIU Video Driver"
        depends on VIDEO_V4L2 && (PPC_MPC512x || COMPILE_TEST) && I2C
        select VIDEOBUF_DMA_CONTIG
        default y
        ---help---
          Support for Freescale VIU video driver. This device captures
          video data, or overlays video on DIU frame buffer.

          Say Y here if you want to enable VIU device on MPC5121e Rev2+.
          In doubt, say N.

config VIDEO_MUX
        tristate "Video Multiplexer"
        select MULTIPLEXER
        depends on VIDEO_V4L2 && OF && VIDEO_V4L2_SUBDEV_API && MEDIA_CONTROLLER
        select REGMAP
        help
          This driver provides support for N:1 video bus multiplexers.

config VIDEO_OMAP3
        tristate "OMAP 3 Camera support"
        depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
        depends on (ARCH_OMAP3 && OMAP_IOMMU) || COMPILE_TEST
        depends on COMMON_CLK && OF
        select ARM_DMA_USE_IOMMU if OMAP_IOMMU
        select VIDEOBUF2_DMA_CONTIG
        select MFD_SYSCON
        select V4L2_FWNODE
        ---help---
          Driver for an OMAP 3 camera controller.

config VIDEO_OMAP3_DEBUG
        bool "OMAP 3 Camera debug messages"
        depends on VIDEO_OMAP3
        ---help---
          Enable debug messages on OMAP 3 camera controller driver.

config VIDEO_PXA27x
        tristate "PXA27x Quick Capture Interface driver"
        depends on VIDEO_DEV && VIDEO_V4L2
        depends on PXA27x || COMPILE_TEST
        select VIDEOBUF2_DMA_SG
        select SG_SPLIT
        select V4L2_FWNODE
        ---help---
          This is a v4l2 driver for the PXA27x Quick Capture Interface

config VIDEO_QCOM_CAMSS
        tristate "Qualcomm 8x16 V4L2 Camera Subsystem driver"
        depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
        depends on (ARCH_QCOM && IOMMU_DMA) || COMPILE_TEST
        select VIDEOBUF2_DMA_SG
        select V4L2_FWNODE

config VIDEO_S3C_CAMIF
        tristate "Samsung S3C24XX/S3C64XX SoC Camera Interface driver"
        depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
        depends on PM
        depends on ARCH_S3C64XX || PLAT_S3C24XX || COMPILE_TEST
        select VIDEOBUF2_DMA_CONTIG
        ---help---
          This is a v4l2 driver for s3c24xx and s3c64xx SoC series camera
          host interface (CAMIF).

          To compile this driver as a module, choose M here: the module
          will be called s3c-camif.

config VIDEO_STM32_DCMI
        tristate "STM32 Digital Camera Memory Interface (DCMI) support"
        depends on VIDEO_V4L2 && OF
        depends on ARCH_STM32 || COMPILE_TEST
        select VIDEOBUF2_DMA_CONTIG
        select V4L2_FWNODE
        ---help---
          This module makes the STM32 Digital Camera Memory Interface (DCMI)
          available as a v4l2 device.

          To compile this driver as a module, choose M here: the module
          will be called stm32-dcmi.

config VIDEO_RENESAS_CEU
        tristate "Renesas Capture Engine Unit (CEU) driver"
        depends on VIDEO_DEV && VIDEO_V4L2
        depends on ARCH_SHMOBILE || ARCH_R7S72100 || COMPILE_TEST
        select VIDEOBUF2_DMA_CONTIG
        select V4L2_FWNODE
        ---help---
          This is a v4l2 driver for the Renesas CEU Interface

source "drivers/media/platform/soc_camera/Kconfig"
source "drivers/media/platform/exynos4-is/Kconfig"
source "drivers/media/platform/am437x/Kconfig"
source "drivers/media/platform/xilinx/Kconfig"
source "drivers/media/platform/rcar-vin/Kconfig"
source "drivers/media/platform/atmel/Kconfig"

config VIDEO_TI_CAL
        tristate "TI CAL (Camera Adaptation Layer) driver"
        depends on VIDEO_DEV && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
        depends on SOC_DRA7XX || COMPILE_TEST
        select VIDEOBUF2_DMA_CONTIG
        select V4L2_FWNODE
        default n
        ---help---
          Support for the TI CAL (Camera Adaptation Layer) block
          found on DRA72X SoC.
          In TI Technical Reference Manual this module is referred as
          Camera Interface Subsystem (CAMSS).

endif # V4L_PLATFORM_DRIVERS

menuconfig V4L_MEM2MEM_DRIVERS
        bool "Memory-to-memory multimedia devices"
        depends on VIDEO_V4L2
        depends on MEDIA_CAMERA_SUPPORT
        default n
        ---help---
          Say Y here to enable selecting drivers for V4L devices that
          use system memory for both source and destination buffers, as opposed
          to capture and output drivers, which use memory buffers for just
          one of those.

if V4L_MEM2MEM_DRIVERS

config VIDEO_CODA
        tristate "Chips&Media Coda multi-standard codec IP"
        depends on VIDEO_DEV && VIDEO_V4L2 && (ARCH_MXC || COMPILE_TEST)
        select SRAM
        select VIDEOBUF2_DMA_CONTIG
        select VIDEOBUF2_VMALLOC
        select V4L2_MEM2MEM_DEV
        select GENERIC_ALLOCATOR
        ---help---
           Coda is a range of video codec IPs that supports
           H.264, MPEG-4, and other video formats.

config VIDEO_IMX_VDOA
        def_tristate VIDEO_CODA if SOC_IMX6Q || COMPILE_TEST

config VIDEO_MEDIATEK_JPEG
        tristate "Mediatek JPEG Codec driver"
        depends on MTK_IOMMU_V1 || COMPILE_TEST
        depends on VIDEO_DEV && VIDEO_V4L2
        depends on ARCH_MEDIATEK || COMPILE_TEST
        select VIDEOBUF2_DMA_CONTIG
        select V4L2_MEM2MEM_DEV
        ---help---
          Mediatek jpeg codec driver provides HW capability to decode
          JPEG format

          To compile this driver as a module, choose M here: the
          module will be called mtk-jpeg

config VIDEO_MEDIATEK_VPU
        tristate "Mediatek Video Processor Unit"
        depends on VIDEO_DEV && VIDEO_V4L2
        depends on ARCH_MEDIATEK || COMPILE_TEST
        ---help---
            This driver provides downloading VPU firmware and
            communicating with VPU. This driver for hw video
            codec embedded in Mediatek's MT8173 SOCs. It is able
            to handle video decoding/encoding in a range of formats.

            To compile this driver as a module, choose M here: the
            module will be called mtk-vpu.

config VIDEO_MEDIATEK_MDP
        tristate "Mediatek MDP driver"
        depends on MTK_IOMMU || COMPILE_TEST
        depends on VIDEO_DEV && VIDEO_V4L2
        depends on ARCH_MEDIATEK || COMPILE_TEST
        select VIDEOBUF2_DMA_CONTIG
        select V4L2_MEM2MEM_DEV
        select VIDEO_MEDIATEK_VPU
        default n
        ---help---
            It is a v4l2 driver and present in Mediatek MT8173 SoCs.
            The driver supports for scaling and color space conversion.

            To compile this driver as a module, choose M here: the
            module will be called mtk-mdp.

config VIDEO_MEDIATEK_VCODEC
        tristate "Mediatek Video Codec driver"
        depends on MTK_IOMMU || COMPILE_TEST
        depends on VIDEO_DEV && VIDEO_V4L2
        depends on ARCH_MEDIATEK || COMPILE_TEST
        select VIDEOBUF2_DMA_CONTIG
        select V4L2_MEM2MEM_DEV
        select VIDEO_MEDIATEK_VPU
        default n
        ---help---
            Mediatek video codec driver provides HW capability to
            encode and decode in a range of video formats
            This driver rely on VPU driver to communicate with VPU.

            To compile this driver as a module, choose M here: the
            module will be called mtk-vcodec

config VIDEO_MEM2MEM_DEINTERLACE
        tristate "Deinterlace support"
        depends on VIDEO_DEV && VIDEO_V4L2
        depends on HAS_DMA
        select VIDEOBUF2_DMA_CONTIG
        select V4L2_MEM2MEM_DEV
        help
            Generic deinterlacing V4L2 driver.

config VIDEO_SAMSUNG_S5P_G2D
        tristate "Samsung S5P and EXYNOS4 G2D 2d graphics accelerator driver"
        depends on VIDEO_DEV && VIDEO_V4L2
        depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
        select VIDEOBUF2_DMA_CONTIG
        select V4L2_MEM2MEM_DEV
        default n
        ---help---
          This is a v4l2 driver for Samsung S5P and EXYNOS4 G2D
          2d graphics accelerator.

config VIDEO_SAMSUNG_S5P_JPEG
        tristate "Samsung S5P/Exynos3250/Exynos4 JPEG codec driver"
        depends on VIDEO_DEV && VIDEO_V4L2
        depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
        select VIDEOBUF2_DMA_CONTIG
        select V4L2_MEM2MEM_DEV
        ---help---
          This is a v4l2 driver for Samsung S5P, EXYNOS3250
          and EXYNOS4 JPEG codec

config VIDEO_SAMSUNG_S5P_MFC
        tristate "Samsung S5P MFC Video Codec"
        depends on VIDEO_DEV && VIDEO_V4L2
        depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
        select VIDEOBUF2_DMA_CONTIG
        default n
        help
            MFC 5.1 and 6.x driver for V4L2

config VIDEO_MX2_EMMAPRP
        tristate "MX2 eMMa-PrP support"
        depends on VIDEO_DEV && VIDEO_V4L2
        depends on SOC_IMX27 || COMPILE_TEST
        select VIDEOBUF2_DMA_CONTIG
        select V4L2_MEM2MEM_DEV
        help
            MX2X chips have a PrP that can be used to process buffers from
            memory to memory. Operations include resizing and format
            conversion.

config VIDEO_SAMSUNG_EXYNOS_GSC
        tristate "Samsung Exynos G-Scaler driver"
        depends on VIDEO_DEV && VIDEO_V4L2
        depends on ARCH_EXYNOS || COMPILE_TEST
        select VIDEOBUF2_DMA_CONTIG
        select V4L2_MEM2MEM_DEV
        help
          This is a v4l2 driver for Samsung EXYNOS5 SoC G-Scaler.

config VIDEO_STI_BDISP
        tristate "STMicroelectronics BDISP 2D blitter driver"
        depends on VIDEO_DEV && VIDEO_V4L2
        depends on ARCH_STI || COMPILE_TEST
        select VIDEOBUF2_DMA_CONTIG
        select V4L2_MEM2MEM_DEV
        help
          This v4l2 mem2mem driver is a 2D blitter for STMicroelectronics SoC.

config VIDEO_STI_HVA
        tristate "STMicroelectronics HVA multi-format video encoder V4L2 driver"
        depends on VIDEO_DEV && VIDEO_V4L2
        depends on ARCH_STI || COMPILE_TEST
        select VIDEOBUF2_DMA_CONTIG
        select V4L2_MEM2MEM_DEV
        help
          This V4L2 driver enables HVA (Hardware Video Accelerator) multi-format
          video encoder of STMicroelectronics SoC, allowing hardware encoding of
          raw uncompressed formats in various compressed video bitstreams format.

          To compile this driver as a module, choose M here:
          the module will be called st-hva.

config VIDEO_STI_HVA_DEBUGFS
        bool "Export STMicroelectronics HVA internals in debugfs"
        depends on VIDEO_STI_HVA
        depends on DEBUG_FS
        help
          Select this to see information about the internal state and the last
          operation of STMicroelectronics HVA multi-format video encoder in
          debugfs.

          Choose N unless you know you need this.

config VIDEO_STI_DELTA
        tristate "STMicroelectronics DELTA multi-format video decoder V4L2 driver"
        depends on VIDEO_DEV && VIDEO_V4L2
        depends on ARCH_STI || COMPILE_TEST
        help
                This V4L2 driver enables DELTA multi-format video decoder
                of STMicroelectronics STiH4xx SoC series allowing hardware
                decoding of various compressed video bitstream format in
                raw uncompressed format.

                Use this option to see the decoders available for such
                hardware.

                Please notice that the driver will only be built if
                at least one of the DELTA decoder below is selected.

if VIDEO_STI_DELTA

config VIDEO_STI_DELTA_MJPEG
        bool "STMicroelectronics DELTA MJPEG support"
        default y
        help
                Enables DELTA MJPEG hardware support.

                To compile this driver as a module, choose M here:
                the module will be called st-delta.

config VIDEO_STI_DELTA_DRIVER
        tristate
        depends on VIDEO_STI_DELTA
        depends on VIDEO_STI_DELTA_MJPEG
        default VIDEO_STI_DELTA_MJPEG
        select VIDEOBUF2_DMA_CONTIG
        select V4L2_MEM2MEM_DEV
        select RPMSG

endif # VIDEO_STI_DELTA

config VIDEO_SH_VEU
        tristate "SuperH VEU mem2mem video processing driver"
        depends on VIDEO_DEV && VIDEO_V4L2 && HAS_DMA
        select VIDEOBUF2_DMA_CONTIG
        select V4L2_MEM2MEM_DEV
        help
            Support for the Video Engine Unit (VEU) on SuperH and
            SH-Mobile SoCs.

config VIDEO_RENESAS_FDP1
        tristate "Renesas Fine Display Processor"
        depends on VIDEO_DEV && VIDEO_V4L2
        depends on ARCH_SHMOBILE || COMPILE_TEST
        depends on (!ARCH_RENESAS && !VIDEO_RENESAS_FCP) || VIDEO_RENESAS_FCP
        select VIDEOBUF2_DMA_CONTIG
        select V4L2_MEM2MEM_DEV
        ---help---
          This is a V4L2 driver for the Renesas Fine Display Processor
          providing colour space conversion, and de-interlacing features.

          To compile this driver as a module, choose M here: the module
          will be called rcar_fdp1.

config VIDEO_RENESAS_JPU
        tristate "Renesas JPEG Processing Unit"
        depends on VIDEO_DEV && VIDEO_V4L2
        depends on ARCH_RENESAS || COMPILE_TEST
        select VIDEOBUF2_DMA_CONTIG
        select V4L2_MEM2MEM_DEV
        ---help---
          This is a V4L2 driver for the Renesas JPEG Processing Unit.

          To compile this driver as a module, choose M here: the module
          will be called rcar_jpu.

config VIDEO_RENESAS_FCP
        tristate "Renesas Frame Compression Processor"
        depends on ARCH_RENESAS || COMPILE_TEST
        depends on OF
        ---help---
          This is a driver for the Renesas Frame Compression Processor (FCP).
          The FCP is a companion module of video processing modules in the
          Renesas R-Car Gen3 SoCs. It handles memory access for the codec,
          VSP and FDP modules.

          To compile this driver as a module, choose M here: the module
          will be called rcar-fcp.

config VIDEO_RENESAS_VSP1
        tristate "Renesas VSP1 Video Processing Engine"
        depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
        depends on ARCH_RENESAS || COMPILE_TEST
        depends on (!ARM64 && !VIDEO_RENESAS_FCP) || VIDEO_RENESAS_FCP
        select VIDEOBUF2_DMA_CONTIG
        select VIDEOBUF2_VMALLOC
        ---help---
          This is a V4L2 driver for the Renesas VSP1 video processing engine.

          To compile this driver as a module, choose M here: the module
          will be called vsp1.

config VIDEO_ROCKCHIP_RGA
        tristate "Rockchip Raster 2d Graphic Acceleration Unit"
        depends on VIDEO_DEV && VIDEO_V4L2
        depends on ARCH_ROCKCHIP || COMPILE_TEST
        select VIDEOBUF2_DMA_SG
        select V4L2_MEM2MEM_DEV
        default n
        ---help---
          This is a v4l2 driver for Rockchip SOC RGA 2d graphics accelerator.
          Rockchip RGA is a separate 2D raster graphic acceleration unit.
          It accelerates 2D graphics operations, such as point/line drawing,
          image scaling, rotation, BitBLT, alpha blending and image blur/sharpness.

          To compile this driver as a module choose m here.

config VIDEO_TI_VPE
        tristate "TI VPE (Video Processing Engine) driver"
        depends on VIDEO_DEV && VIDEO_V4L2
        depends on SOC_DRA7XX || COMPILE_TEST
        select VIDEOBUF2_DMA_CONTIG
        select V4L2_MEM2MEM_DEV
        select VIDEO_TI_VPDMA
        select VIDEO_TI_SC
        select VIDEO_TI_CSC
        default n
        ---help---
          Support for the TI VPE(Video Processing Engine) block
          found on DRA7XX SoC.

config VIDEO_TI_VPE_DEBUG
        bool "VPE debug messages"
        depends on VIDEO_TI_VPE
        ---help---
          Enable debug messages on VPE driver.

config VIDEO_QCOM_VENUS
        tristate "Qualcomm Venus V4L2 encoder/decoder driver"
        depends on VIDEO_DEV && VIDEO_V4L2
        depends on (ARCH_QCOM && IOMMU_DMA) || COMPILE_TEST
        select QCOM_MDT_LOADER if ARCH_QCOM
        select QCOM_SCM if ARCH_QCOM
        select VIDEOBUF2_DMA_SG
        select V4L2_MEM2MEM_DEV
        ---help---
          This is a V4L2 driver for Qualcomm Venus video accelerator
          hardware. It accelerates encoding and decoding operations
          on various Qualcomm SoCs.
          To compile this driver as a module choose m here.

endif # V4L_MEM2MEM_DRIVERS

# TI VIDEO PORT Helper Modules
# These will be selected by VPE and VIP
config VIDEO_TI_VPDMA
        tristate

config VIDEO_TI_SC
        tristate

config VIDEO_TI_CSC
        tristate

menuconfig V4L_TEST_DRIVERS
        bool "Media test drivers"
        depends on MEDIA_CAMERA_SUPPORT

if V4L_TEST_DRIVERS

source "drivers/media/platform/vimc/Kconfig"

source "drivers/media/platform/vivid/Kconfig"

config VIDEO_VIM2M
        tristate "Virtual Memory-to-Memory Driver"
        depends on VIDEO_DEV && VIDEO_V4L2
        select VIDEOBUF2_VMALLOC
        select V4L2_MEM2MEM_DEV
        default n
        ---help---
          This is a virtual test device for the memory-to-memory driver
          framework.
endif #V4L_TEST_DRIVERS

menuconfig DVB_PLATFORM_DRIVERS
        bool "DVB platform devices"
        depends on MEDIA_DIGITAL_TV_SUPPORT
        default n
        ---help---
          Say Y here to enable support for platform-specific Digital TV drivers.

if DVB_PLATFORM_DRIVERS
source "drivers/media/platform/sti/c8sectpfe/Kconfig"
endif #DVB_PLATFORM_DRIVERS

menuconfig CEC_PLATFORM_DRIVERS
        bool "CEC platform devices"
        depends on MEDIA_CEC_SUPPORT

if CEC_PLATFORM_DRIVERS

config VIDEO_MESON_AO_CEC
        tristate "Amlogic Meson AO CEC driver"
        depends on ARCH_MESON || COMPILE_TEST
        select CEC_CORE
        select CEC_NOTIFIER
        ---help---
          This is a driver for Amlogic Meson SoCs AO CEC interface. It uses the
          generic CEC framework interface.
          CEC bus is present in the HDMI connector and enables communication

config CEC_GPIO
        tristate "Generic GPIO-based CEC driver"
        depends on PREEMPT || COMPILE_TEST
        select CEC_CORE
        select CEC_PIN
        select GPIOLIB
        ---help---
          This is a generic GPIO-based CEC driver.
          The CEC bus is present in the HDMI connector and enables communication
          between compatible devices.

config VIDEO_SAMSUNG_S5P_CEC
       tristate "Samsung S5P CEC driver"
       depends on ARCH_EXYNOS || COMPILE_TEST
       select CEC_CORE
       select CEC_NOTIFIER
       ---help---
         This is a driver for Samsung S5P HDMI CEC interface. It uses the
         generic CEC framework interface.
         CEC bus is present in the HDMI connector and enables communication
         between compatible devices.

config VIDEO_STI_HDMI_CEC
       tristate "STMicroelectronics STiH4xx HDMI CEC driver"
       depends on ARCH_STI || COMPILE_TEST
       select CEC_CORE
       select CEC_NOTIFIER
       ---help---
         This is a driver for STIH4xx HDMI CEC interface. It uses the
         generic CEC framework interface.
         CEC bus is present in the HDMI connector and enables communication
         between compatible devices.

config VIDEO_STM32_HDMI_CEC
       tristate "STMicroelectronics STM32 HDMI CEC driver"
       depends on ARCH_STM32 || COMPILE_TEST
       select REGMAP
       select REGMAP_MMIO
       select CEC_CORE
       ---help---
         This is a driver for STM32 interface. It uses the
         generic CEC framework interface.
         CEC bus is present in the HDMI connector and enables communication
         between compatible devices.

config VIDEO_TEGRA_HDMI_CEC
       tristate "Tegra HDMI CEC driver"
       depends on ARCH_TEGRA || COMPILE_TEST
       select CEC_CORE
       select CEC_NOTIFIER
       ---help---
         This is a driver for the Tegra HDMI CEC interface. It uses the
         generic CEC framework interface.
         The CEC bus is present in the HDMI connector and enables communication
         between compatible devices.

endif #CEC_PLATFORM_DRIVERS

menuconfig SDR_PLATFORM_DRIVERS
        bool "SDR platform devices"
        depends on MEDIA_SDR_SUPPORT
        default n
        ---help---
          Say Y here to enable support for platform-specific SDR Drivers.

if SDR_PLATFORM_DRIVERS

config VIDEO_RCAR_DRIF
        tristate "Renesas Digitial Radio Interface (DRIF)"
        depends on VIDEO_V4L2
        depends on ARCH_RENESAS || COMPILE_TEST
        select VIDEOBUF2_VMALLOC
        ---help---
          Say Y if you want to enable R-Car Gen3 DRIF support. DRIF is Digital
          Radio Interface that interfaces with an RF front end chip. It is a
          receiver of digital data which uses DMA to transfer received data to
          a configured location for an application to use.

          To compile this driver as a module, choose M here; the module
          will be called rcar_drif.

endif # SDR_PLATFORM_DRIVERS