1/* SPDX-License-Identifier: GPL-2.0 */ 2 3#ifndef _ST_H 4#define _ST_H 5 6#include <linux/completion.h> 7#include <linux/mutex.h> 8#include <linux/kref.h> 9#include <scsi/scsi_cmnd.h> 10 11/* Descriptor for analyzed sense data */ 12struct st_cmdstatus { 13 int midlevel_result; 14 struct scsi_sense_hdr sense_hdr; 15 int have_sense; 16 int residual; 17 u64 uremainder64; 18 u8 flags; 19 u8 remainder_valid; 20 u8 fixed_format; 21 u8 deferred; 22}; 23 24struct scsi_tape; 25 26/* scsi tape command */ 27struct st_request { 28 unsigned char cmd[MAX_COMMAND_SIZE]; 29 unsigned char sense[SCSI_SENSE_BUFFERSIZE]; 30 int result; 31 struct scsi_tape *stp; 32 struct completion *waiting; 33 struct bio *bio; 34}; 35 36/* The tape buffer descriptor. */ 37struct st_buffer { 38 unsigned char dma; /* DMA-able buffer */ 39 unsigned char cleared; /* internal buffer cleared after open? */ 40 unsigned short do_dio; /* direct i/o set up? */ 41 int buffer_size; 42 int buffer_blocks; 43 int buffer_bytes; 44 int read_pointer; 45 int writing; 46 int syscall_result; 47 struct st_request *last_SRpnt; 48 struct st_cmdstatus cmdstat; 49 struct page **reserved_pages; 50 int reserved_page_order; 51 struct page **mapped_pages; 52 struct rq_map_data map_data; 53 unsigned char *b_data; 54 unsigned short use_sg; /* zero or max number of s/g segments for this adapter */ 55 unsigned short sg_segs; /* number of segments in s/g list */ 56 unsigned short frp_segs; /* number of buffer segments */ 57}; 58 59/* The tape mode definition */ 60struct st_modedef { 61 unsigned char defined; 62 unsigned char sysv; /* SYS V semantics? */ 63 unsigned char do_async_writes; 64 unsigned char do_buffer_writes; 65 unsigned char do_read_ahead; 66 unsigned char defaults_for_writes; 67 unsigned char default_compression; /* 0 = don't touch, etc */ 68 short default_density; /* Forced density, -1 = no value */ 69 int default_blksize; /* Forced blocksize, -1 = no value */ 70 struct scsi_tape *tape; 71 struct device *devs[2]; /* Auto-rewind and non-rewind devices */ 72 struct cdev *cdevs[2]; /* Auto-rewind and non-rewind devices */ 73}; 74 75/* Number of modes can be changed by changing ST_NBR_MODE_BITS. The maximum 76 number of modes is 16 (ST_NBR_MODE_BITS 4) */ 77#define ST_NBR_MODE_BITS 2 78#define ST_NBR_MODES (1 << ST_NBR_MODE_BITS) 79#define ST_MODE_SHIFT (7 - ST_NBR_MODE_BITS) 80#define ST_MODE_MASK ((ST_NBR_MODES - 1) << ST_MODE_SHIFT) 81 82#define ST_MAX_TAPES (1 << (20 - (ST_NBR_MODE_BITS + 1))) 83#define ST_MAX_TAPE_ENTRIES (ST_MAX_TAPES << (ST_NBR_MODE_BITS + 1)) 84 85/* The status related to each partition */ 86struct st_partstat { 87 unsigned char rw; 88 unsigned char eof; 89 unsigned char at_sm; 90 unsigned char last_block_valid; 91 u32 last_block_visited; 92 int drv_block; /* The block where the drive head is */ 93 int drv_file; 94}; 95 96/* Tape statistics */ 97struct scsi_tape_stats { 98 atomic64_t read_byte_cnt; /* bytes read */ 99 atomic64_t write_byte_cnt; /* bytes written */ 100 atomic64_t in_flight; /* Number of I/Os in flight */ 101 atomic64_t read_cnt; /* Count of read requests */ 102 atomic64_t write_cnt; /* Count of write requests */ 103 atomic64_t other_cnt; /* Count of other requests either 104 * implicit or from user space 105 * ioctl. */ 106 atomic64_t resid_cnt; /* Count of resid_len > 0 */ 107 atomic64_t tot_read_time; /* ktime spent completing reads */ 108 atomic64_t tot_write_time; /* ktime spent completing writes */ 109 atomic64_t tot_io_time; /* ktime spent doing any I/O */ 110 ktime_t read_time; /* holds ktime request was queued */ 111 ktime_t write_time; /* holds ktime request was queued */ 112 ktime_t other_time; /* holds ktime request was queued */ 113 atomic_t last_read_size; /* Number of bytes issued for last read */ 114 atomic_t last_write_size; /* Number of bytes issued for last write */ 115}; 116 117#define ST_NBR_PARTITIONS 4 118 119/* The tape drive descriptor */ 120struct scsi_tape { 121 struct scsi_driver *driver; 122 struct scsi_device *device; 123 struct mutex lock; /* For serialization */ 124 struct completion wait; /* For SCSI commands */ 125 struct st_buffer *buffer; 126 int index; 127 128 /* Drive characteristics */ 129 unsigned char omit_blklims; 130 unsigned char do_auto_lock; 131 unsigned char can_bsr; 132 unsigned char can_partitions; 133 unsigned char two_fm; 134 unsigned char fast_mteom; 135 unsigned char immediate; 136 unsigned char restr_dma; 137 unsigned char scsi2_logical; 138 unsigned char default_drvbuffer; /* 0xff = don't touch, value 3 bits */ 139 unsigned char cln_mode; /* 0 = none, otherwise sense byte nbr */ 140 unsigned char cln_sense_value; 141 unsigned char cln_sense_mask; 142 unsigned char use_pf; /* Set Page Format bit in all mode selects? */ 143 unsigned char try_dio; /* try direct i/o in general? */ 144 unsigned char try_dio_now; /* try direct i/o before next close? */ 145 unsigned char c_algo; /* compression algorithm */ 146 unsigned char pos_unknown; /* after reset position unknown */ 147 unsigned char sili; /* use SILI when reading in variable b mode */ 148 unsigned char immediate_filemark; /* write filemark immediately */ 149 int tape_type; 150 int long_timeout; /* timeout for commands known to take long time */ 151 152 /* Mode characteristics */ 153 struct st_modedef modes[ST_NBR_MODES]; 154 int current_mode; 155 156 /* Status variables */ 157 int partition; 158 int new_partition; 159 int nbr_partitions; /* zero until partition support enabled */ 160 struct st_partstat ps[ST_NBR_PARTITIONS]; 161 unsigned char dirty; 162 unsigned char ready; 163 unsigned char write_prot; 164 unsigned char drv_write_prot; 165 unsigned char in_use; 166 unsigned char blksize_changed; 167 unsigned char density_changed; 168 unsigned char compression_changed; 169 unsigned char drv_buffer; 170 unsigned char density; 171 unsigned char door_locked; 172 unsigned char autorew_dev; /* auto-rewind device */ 173 unsigned char rew_at_close; /* rewind necessary at close */ 174 unsigned char inited; 175 unsigned char cleaning_req; /* cleaning requested? */ 176 int block_size; 177 int min_block; 178 int max_block; 179 int recover_count; /* From tape opening */ 180 int recover_reg; /* From last status call */ 181 182#if DEBUG 183 unsigned char write_pending; 184 int nbr_finished; 185 int nbr_waits; 186 int nbr_requests; 187 int nbr_dio; 188 int nbr_pages; 189 unsigned char last_cmnd[6]; 190 unsigned char last_sense[16]; 191#endif 192 struct gendisk *disk; 193 struct kref kref; 194 struct scsi_tape_stats *stats; 195}; 196 197/* Bit masks for use_pf */ 198#define USE_PF 1 199#define PF_TESTED 2 200 201/* Values of eof */ 202#define ST_NOEOF 0 203#define ST_FM_HIT 1 204#define ST_FM 2 205#define ST_EOM_OK 3 206#define ST_EOM_ERROR 4 207#define ST_EOD_1 5 208#define ST_EOD_2 6 209#define ST_EOD 7 210/* EOD hit while reading => ST_EOD_1 => return zero => ST_EOD_2 => 211 return zero => ST_EOD, return ENOSPC */ 212/* When writing: ST_EOM_OK == early warning found, write OK 213 ST_EOD_1 == allow trying new write after early warning 214 ST_EOM_ERROR == early warning found, not able to write all */ 215 216/* Values of rw */ 217#define ST_IDLE 0 218#define ST_READING 1 219#define ST_WRITING 2 220 221/* Values of ready state */ 222#define ST_READY 0 223#define ST_NOT_READY 1 224#define ST_NO_TAPE 2 225 226/* Values for door lock state */ 227#define ST_UNLOCKED 0 228#define ST_LOCKED_EXPLICIT 1 229#define ST_LOCKED_AUTO 2 230#define ST_LOCK_FAILS 3 231 232/* Positioning SCSI-commands for Tandberg, etc. drives */ 233#define QFA_REQUEST_BLOCK 0x02 234#define QFA_SEEK_BLOCK 0x0c 235 236/* Setting the binary options */ 237#define ST_DONT_TOUCH 0 238#define ST_NO 1 239#define ST_YES 2 240 241#define EXTENDED_SENSE_START 18 242 243/* Masks for some conditions in the sense data */ 244#define SENSE_FMK 0x80 245#define SENSE_EOM 0x40 246#define SENSE_ILI 0x20 247 248#endif 249