linux/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
<<
>>
Prefs
   1/*
   2 * Rockchip USB2.0 PHY with Innosilicon IP block driver
   3 *
   4 * Copyright (C) 2016 Fuzhou Rockchip Electronics Co., Ltd
   5 *
   6 * This program is free software; you can redistribute it and/or modify
   7 * it under the terms of the GNU General Public License as published by
   8 * the Free Software Foundation; either version 2 of the License, or
   9 * (at your option) any later version.
  10 *
  11 * This program is distributed in the hope that it will be useful,
  12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
  13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  14 * GNU General Public License for more details.
  15 */
  16
  17#include <linux/clk.h>
  18#include <linux/clk-provider.h>
  19#include <linux/delay.h>
  20#include <linux/extcon-provider.h>
  21#include <linux/interrupt.h>
  22#include <linux/io.h>
  23#include <linux/gpio/consumer.h>
  24#include <linux/jiffies.h>
  25#include <linux/kernel.h>
  26#include <linux/module.h>
  27#include <linux/mutex.h>
  28#include <linux/of.h>
  29#include <linux/of_address.h>
  30#include <linux/of_irq.h>
  31#include <linux/of_platform.h>
  32#include <linux/phy/phy.h>
  33#include <linux/platform_device.h>
  34#include <linux/power_supply.h>
  35#include <linux/regmap.h>
  36#include <linux/mfd/syscon.h>
  37#include <linux/usb/of.h>
  38#include <linux/usb/otg.h>
  39
  40#define BIT_WRITEABLE_SHIFT     16
  41#define SCHEDULE_DELAY          (60 * HZ)
  42#define OTG_SCHEDULE_DELAY      (2 * HZ)
  43
  44enum rockchip_usb2phy_port_id {
  45        USB2PHY_PORT_OTG,
  46        USB2PHY_PORT_HOST,
  47        USB2PHY_NUM_PORTS,
  48};
  49
  50enum rockchip_usb2phy_host_state {
  51        PHY_STATE_HS_ONLINE     = 0,
  52        PHY_STATE_DISCONNECT    = 1,
  53        PHY_STATE_CONNECT       = 2,
  54        PHY_STATE_FS_LS_ONLINE  = 4,
  55};
  56
  57/**
  58 * Different states involved in USB charger detection.
  59 * USB_CHG_STATE_UNDEFINED      USB charger is not connected or detection
  60 *                              process is not yet started.
  61 * USB_CHG_STATE_WAIT_FOR_DCD   Waiting for Data pins contact.
  62 * USB_CHG_STATE_DCD_DONE       Data pin contact is detected.
  63 * USB_CHG_STATE_PRIMARY_DONE   Primary detection is completed (Detects
  64 *                              between SDP and DCP/CDP).
  65 * USB_CHG_STATE_SECONDARY_DONE Secondary detection is completed (Detects
  66 *                              between DCP and CDP).
  67 * USB_CHG_STATE_DETECTED       USB charger type is determined.
  68 */
  69enum usb_chg_state {
  70        USB_CHG_STATE_UNDEFINED = 0,
  71        USB_CHG_STATE_WAIT_FOR_DCD,
  72        USB_CHG_STATE_DCD_DONE,
  73        USB_CHG_STATE_PRIMARY_DONE,
  74        USB_CHG_STATE_SECONDARY_DONE,
  75        USB_CHG_STATE_DETECTED,
  76};
  77
  78static const unsigned int rockchip_usb2phy_extcon_cable[] = {
  79        EXTCON_USB,
  80        EXTCON_USB_HOST,
  81        EXTCON_CHG_USB_SDP,
  82        EXTCON_CHG_USB_CDP,
  83        EXTCON_CHG_USB_DCP,
  84        EXTCON_CHG_USB_SLOW,
  85        EXTCON_NONE,
  86};
  87
  88struct usb2phy_reg {
  89        unsigned int    offset;
  90        unsigned int    bitend;
  91        unsigned int    bitstart;
  92        unsigned int    disable;
  93        unsigned int    enable;
  94};
  95
  96/**
  97 * struct rockchip_chg_det_reg: usb charger detect registers
  98 * @cp_det: charging port detected successfully.
  99 * @dcp_det: dedicated charging port detected successfully.
 100 * @dp_det: assert data pin connect successfully.
 101 * @idm_sink_en: open dm sink curren.
 102 * @idp_sink_en: open dp sink current.
 103 * @idp_src_en: open dm source current.
 104 * @rdm_pdwn_en: open dm pull down resistor.
 105 * @vdm_src_en: open dm voltage source.
 106 * @vdp_src_en: open dp voltage source.
 107 * @opmode: utmi operational mode.
 108 */
 109struct rockchip_chg_det_reg {
 110        struct usb2phy_reg      cp_det;
 111        struct usb2phy_reg      dcp_det;
 112        struct usb2phy_reg      dp_det;
 113        struct usb2phy_reg      idm_sink_en;
 114        struct usb2phy_reg      idp_sink_en;
 115        struct usb2phy_reg      idp_src_en;
 116        struct usb2phy_reg      rdm_pdwn_en;
 117        struct usb2phy_reg      vdm_src_en;
 118        struct usb2phy_reg      vdp_src_en;
 119        struct usb2phy_reg      opmode;
 120};
 121
 122/**
 123 * struct rockchip_usb2phy_port_cfg: usb-phy port configuration.
 124 * @phy_sus: phy suspend register.
 125 * @bvalid_det_en: vbus valid rise detection enable register.
 126 * @bvalid_det_st: vbus valid rise detection status register.
 127 * @bvalid_det_clr: vbus valid rise detection clear register.
 128 * @ls_det_en: linestate detection enable register.
 129 * @ls_det_st: linestate detection state register.
 130 * @ls_det_clr: linestate detection clear register.
 131 * @utmi_avalid: utmi vbus avalid status register.
 132 * @utmi_bvalid: utmi vbus bvalid status register.
 133 * @utmi_ls: utmi linestate state register.
 134 * @utmi_hstdet: utmi host disconnect register.
 135 */
 136struct rockchip_usb2phy_port_cfg {
 137        struct usb2phy_reg      phy_sus;
 138        struct usb2phy_reg      bvalid_det_en;
 139        struct usb2phy_reg      bvalid_det_st;
 140        struct usb2phy_reg      bvalid_det_clr;
 141        struct usb2phy_reg      ls_det_en;
 142        struct usb2phy_reg      ls_det_st;
 143        struct usb2phy_reg      ls_det_clr;
 144        struct usb2phy_reg      utmi_avalid;
 145        struct usb2phy_reg      utmi_bvalid;
 146        struct usb2phy_reg      utmi_ls;
 147        struct usb2phy_reg      utmi_hstdet;
 148};
 149
 150/**
 151 * struct rockchip_usb2phy_cfg: usb-phy configuration.
 152 * @reg: the address offset of grf for usb-phy config.
 153 * @num_ports: specify how many ports that the phy has.
 154 * @clkout_ctl: keep on/turn off output clk of phy.
 155 * @chg_det: charger detection registers.
 156 */
 157struct rockchip_usb2phy_cfg {
 158        unsigned int    reg;
 159        unsigned int    num_ports;
 160        struct usb2phy_reg      clkout_ctl;
 161        const struct rockchip_usb2phy_port_cfg  port_cfgs[USB2PHY_NUM_PORTS];
 162        const struct rockchip_chg_det_reg       chg_det;
 163};
 164
 165/**
 166 * struct rockchip_usb2phy_port: usb-phy port data.
 167 * @port_id: flag for otg port or host port.
 168 * @suspended: phy suspended flag.
 169 * @utmi_avalid: utmi avalid status usage flag.
 170 *      true    - use avalid to get vbus status
 171 *      flase   - use bvalid to get vbus status
 172 * @vbus_attached: otg device vbus status.
 173 * @bvalid_irq: IRQ number assigned for vbus valid rise detection.
 174 * @ls_irq: IRQ number assigned for linestate detection.
 175 * @otg_mux_irq: IRQ number which multiplex otg-id/otg-bvalid/linestate
 176 *               irqs to one irq in otg-port.
 177 * @mutex: for register updating in sm_work.
 178 * @chg_work: charge detect work.
 179 * @otg_sm_work: OTG state machine work.
 180 * @sm_work: HOST state machine work.
 181 * @phy_cfg: port register configuration, assigned by driver data.
 182 * @event_nb: hold event notification callback.
 183 * @state: define OTG enumeration states before device reset.
 184 * @mode: the dr_mode of the controller.
 185 */
 186struct rockchip_usb2phy_port {
 187        struct phy      *phy;
 188        unsigned int    port_id;
 189        bool            suspended;
 190        bool            utmi_avalid;
 191        bool            vbus_attached;
 192        int             bvalid_irq;
 193        int             ls_irq;
 194        int             otg_mux_irq;
 195        struct mutex    mutex;
 196        struct          delayed_work chg_work;
 197        struct          delayed_work otg_sm_work;
 198        struct          delayed_work sm_work;
 199        const struct    rockchip_usb2phy_port_cfg *port_cfg;
 200        struct notifier_block   event_nb;
 201        enum usb_otg_state      state;
 202        enum usb_dr_mode        mode;
 203};
 204
 205/**
 206 * struct rockchip_usb2phy: usb2.0 phy driver data.
 207 * @grf: General Register Files regmap.
 208 * @usbgrf: USB General Register Files regmap.
 209 * @clk: clock struct of phy input clk.
 210 * @clk480m: clock struct of phy output clk.
 211 * @clk_hw: clock struct of phy output clk management.
 212 * @chg_state: states involved in USB charger detection.
 213 * @chg_type: USB charger types.
 214 * @dcd_retries: The retry count used to track Data contact
 215 *               detection process.
 216 * @edev: extcon device for notification registration
 217 * @phy_cfg: phy register configuration, assigned by driver data.
 218 * @ports: phy port instance.
 219 */
 220struct rockchip_usb2phy {
 221        struct device   *dev;
 222        struct regmap   *grf;
 223        struct regmap   *usbgrf;
 224        struct clk      *clk;
 225        struct clk      *clk480m;
 226        struct clk_hw   clk480m_hw;
 227        enum usb_chg_state      chg_state;
 228        enum power_supply_type  chg_type;
 229        u8                      dcd_retries;
 230        struct extcon_dev       *edev;
 231        const struct rockchip_usb2phy_cfg       *phy_cfg;
 232        struct rockchip_usb2phy_port    ports[USB2PHY_NUM_PORTS];
 233};
 234
 235static inline struct regmap *get_reg_base(struct rockchip_usb2phy *rphy)
 236{
 237        return rphy->usbgrf == NULL ? rphy->grf : rphy->usbgrf;
 238}
 239
 240static inline int property_enable(struct regmap *base,
 241                                  const struct usb2phy_reg *reg, bool en)
 242{
 243        unsigned int val, mask, tmp;
 244
 245        tmp = en ? reg->enable : reg->disable;
 246        mask = GENMASK(reg->bitend, reg->bitstart);
 247        val = (tmp << reg->bitstart) | (mask << BIT_WRITEABLE_SHIFT);
 248
 249        return regmap_write(base, reg->offset, val);
 250}
 251
 252static inline bool property_enabled(struct regmap *base,
 253                                    const struct usb2phy_reg *reg)
 254{
 255        int ret;
 256        unsigned int tmp, orig;
 257        unsigned int mask = GENMASK(reg->bitend, reg->bitstart);
 258
 259        ret = regmap_read(base, reg->offset, &orig);
 260        if (ret)
 261                return false;
 262
 263        tmp = (orig & mask) >> reg->bitstart;
 264        return tmp == reg->enable;
 265}
 266
 267static int rockchip_usb2phy_clk480m_prepare(struct clk_hw *hw)
 268{
 269        struct rockchip_usb2phy *rphy =
 270                container_of(hw, struct rockchip_usb2phy, clk480m_hw);
 271        struct regmap *base = get_reg_base(rphy);
 272        int ret;
 273
 274        /* turn on 480m clk output if it is off */
 275        if (!property_enabled(base, &rphy->phy_cfg->clkout_ctl)) {
 276                ret = property_enable(base, &rphy->phy_cfg->clkout_ctl, true);
 277                if (ret)
 278                        return ret;
 279
 280                /* waiting for the clk become stable */
 281                usleep_range(1200, 1300);
 282        }
 283
 284        return 0;
 285}
 286
 287static void rockchip_usb2phy_clk480m_unprepare(struct clk_hw *hw)
 288{
 289        struct rockchip_usb2phy *rphy =
 290                container_of(hw, struct rockchip_usb2phy, clk480m_hw);
 291        struct regmap *base = get_reg_base(rphy);
 292
 293        /* turn off 480m clk output */
 294        property_enable(base, &rphy->phy_cfg->clkout_ctl, false);
 295}
 296
 297static int rockchip_usb2phy_clk480m_prepared(struct clk_hw *hw)
 298{
 299        struct rockchip_usb2phy *rphy =
 300                container_of(hw, struct rockchip_usb2phy, clk480m_hw);
 301        struct regmap *base = get_reg_base(rphy);
 302
 303        return property_enabled(base, &rphy->phy_cfg->clkout_ctl);
 304}
 305
 306static unsigned long
 307rockchip_usb2phy_clk480m_recalc_rate(struct clk_hw *hw,
 308                                     unsigned long parent_rate)
 309{
 310        return 480000000;
 311}
 312
 313static const struct clk_ops rockchip_usb2phy_clkout_ops = {
 314        .prepare = rockchip_usb2phy_clk480m_prepare,
 315        .unprepare = rockchip_usb2phy_clk480m_unprepare,
 316        .is_prepared = rockchip_usb2phy_clk480m_prepared,
 317        .recalc_rate = rockchip_usb2phy_clk480m_recalc_rate,
 318};
 319
 320static void rockchip_usb2phy_clk480m_unregister(void *data)
 321{
 322        struct rockchip_usb2phy *rphy = data;
 323
 324        of_clk_del_provider(rphy->dev->of_node);
 325        clk_unregister(rphy->clk480m);
 326}
 327
 328static int
 329rockchip_usb2phy_clk480m_register(struct rockchip_usb2phy *rphy)
 330{
 331        struct device_node *node = rphy->dev->of_node;
 332        struct clk_init_data init;
 333        const char *clk_name;
 334        int ret;
 335
 336        init.flags = 0;
 337        init.name = "clk_usbphy_480m";
 338        init.ops = &rockchip_usb2phy_clkout_ops;
 339
 340        /* optional override of the clockname */
 341        of_property_read_string(node, "clock-output-names", &init.name);
 342
 343        if (rphy->clk) {
 344                clk_name = __clk_get_name(rphy->clk);
 345                init.parent_names = &clk_name;
 346                init.num_parents = 1;
 347        } else {
 348                init.parent_names = NULL;
 349                init.num_parents = 0;
 350        }
 351
 352        rphy->clk480m_hw.init = &init;
 353
 354        /* register the clock */
 355        rphy->clk480m = clk_register(rphy->dev, &rphy->clk480m_hw);
 356        if (IS_ERR(rphy->clk480m)) {
 357                ret = PTR_ERR(rphy->clk480m);
 358                goto err_ret;
 359        }
 360
 361        ret = of_clk_add_provider(node, of_clk_src_simple_get, rphy->clk480m);
 362        if (ret < 0)
 363                goto err_clk_provider;
 364
 365        ret = devm_add_action(rphy->dev, rockchip_usb2phy_clk480m_unregister,
 366                              rphy);
 367        if (ret < 0)
 368                goto err_unreg_action;
 369
 370        return 0;
 371
 372err_unreg_action:
 373        of_clk_del_provider(node);
 374err_clk_provider:
 375        clk_unregister(rphy->clk480m);
 376err_ret:
 377        return ret;
 378}
 379
 380static int rockchip_usb2phy_extcon_register(struct rockchip_usb2phy *rphy)
 381{
 382        int ret;
 383        struct device_node *node = rphy->dev->of_node;
 384        struct extcon_dev *edev;
 385
 386        if (of_property_read_bool(node, "extcon")) {
 387                edev = extcon_get_edev_by_phandle(rphy->dev, 0);
 388                if (IS_ERR(edev)) {
 389                        if (PTR_ERR(edev) != -EPROBE_DEFER)
 390                                dev_err(rphy->dev, "Invalid or missing extcon\n");
 391                        return PTR_ERR(edev);
 392                }
 393        } else {
 394                /* Initialize extcon device */
 395                edev = devm_extcon_dev_allocate(rphy->dev,
 396                                                rockchip_usb2phy_extcon_cable);
 397
 398                if (IS_ERR(edev))
 399                        return -ENOMEM;
 400
 401                ret = devm_extcon_dev_register(rphy->dev, edev);
 402                if (ret) {
 403                        dev_err(rphy->dev, "failed to register extcon device\n");
 404                        return ret;
 405                }
 406        }
 407
 408        rphy->edev = edev;
 409
 410        return 0;
 411}
 412
 413static int rockchip_usb2phy_init(struct phy *phy)
 414{
 415        struct rockchip_usb2phy_port *rport = phy_get_drvdata(phy);
 416        struct rockchip_usb2phy *rphy = dev_get_drvdata(phy->dev.parent);
 417        int ret = 0;
 418
 419        mutex_lock(&rport->mutex);
 420
 421        if (rport->port_id == USB2PHY_PORT_OTG) {
 422                if (rport->mode != USB_DR_MODE_HOST &&
 423                    rport->mode != USB_DR_MODE_UNKNOWN) {
 424                        /* clear bvalid status and enable bvalid detect irq */
 425                        ret = property_enable(rphy->grf,
 426                                              &rport->port_cfg->bvalid_det_clr,
 427                                              true);
 428                        if (ret)
 429                                goto out;
 430
 431                        ret = property_enable(rphy->grf,
 432                                              &rport->port_cfg->bvalid_det_en,
 433                                              true);
 434                        if (ret)
 435                                goto out;
 436
 437                        schedule_delayed_work(&rport->otg_sm_work,
 438                                              OTG_SCHEDULE_DELAY * 3);
 439                } else {
 440                        /* If OTG works in host only mode, do nothing. */
 441                        dev_dbg(&rport->phy->dev, "mode %d\n", rport->mode);
 442                }
 443        } else if (rport->port_id == USB2PHY_PORT_HOST) {
 444                /* clear linestate and enable linestate detect irq */
 445                ret = property_enable(rphy->grf,
 446                                      &rport->port_cfg->ls_det_clr, true);
 447                if (ret)
 448                        goto out;
 449
 450                ret = property_enable(rphy->grf,
 451                                      &rport->port_cfg->ls_det_en, true);
 452                if (ret)
 453                        goto out;
 454
 455                schedule_delayed_work(&rport->sm_work, SCHEDULE_DELAY);
 456        }
 457
 458out:
 459        mutex_unlock(&rport->mutex);
 460        return ret;
 461}
 462
 463static int rockchip_usb2phy_power_on(struct phy *phy)
 464{
 465        struct rockchip_usb2phy_port *rport = phy_get_drvdata(phy);
 466        struct rockchip_usb2phy *rphy = dev_get_drvdata(phy->dev.parent);
 467        struct regmap *base = get_reg_base(rphy);
 468        int ret;
 469
 470        dev_dbg(&rport->phy->dev, "port power on\n");
 471
 472        if (!rport->suspended)
 473                return 0;
 474
 475        ret = clk_prepare_enable(rphy->clk480m);
 476        if (ret)
 477                return ret;
 478
 479        ret = property_enable(base, &rport->port_cfg->phy_sus, false);
 480        if (ret)
 481                return ret;
 482
 483        /* waiting for the utmi_clk to become stable */
 484        usleep_range(1500, 2000);
 485
 486        rport->suspended = false;
 487        return 0;
 488}
 489
 490static int rockchip_usb2phy_power_off(struct phy *phy)
 491{
 492        struct rockchip_usb2phy_port *rport = phy_get_drvdata(phy);
 493        struct rockchip_usb2phy *rphy = dev_get_drvdata(phy->dev.parent);
 494        struct regmap *base = get_reg_base(rphy);
 495        int ret;
 496
 497        dev_dbg(&rport->phy->dev, "port power off\n");
 498
 499        if (rport->suspended)
 500                return 0;
 501
 502        ret = property_enable(base, &rport->port_cfg->phy_sus, true);
 503        if (ret)
 504                return ret;
 505
 506        rport->suspended = true;
 507        clk_disable_unprepare(rphy->clk480m);
 508
 509        return 0;
 510}
 511
 512static int rockchip_usb2phy_exit(struct phy *phy)
 513{
 514        struct rockchip_usb2phy_port *rport = phy_get_drvdata(phy);
 515
 516        if (rport->port_id == USB2PHY_PORT_OTG &&
 517            rport->mode != USB_DR_MODE_HOST &&
 518            rport->mode != USB_DR_MODE_UNKNOWN) {
 519                cancel_delayed_work_sync(&rport->otg_sm_work);
 520                cancel_delayed_work_sync(&rport->chg_work);
 521        } else if (rport->port_id == USB2PHY_PORT_HOST)
 522                cancel_delayed_work_sync(&rport->sm_work);
 523
 524        return 0;
 525}
 526
 527static const struct phy_ops rockchip_usb2phy_ops = {
 528        .init           = rockchip_usb2phy_init,
 529        .exit           = rockchip_usb2phy_exit,
 530        .power_on       = rockchip_usb2phy_power_on,
 531        .power_off      = rockchip_usb2phy_power_off,
 532        .owner          = THIS_MODULE,
 533};
 534
 535static void rockchip_usb2phy_otg_sm_work(struct work_struct *work)
 536{
 537        struct rockchip_usb2phy_port *rport =
 538                container_of(work, struct rockchip_usb2phy_port,
 539                             otg_sm_work.work);
 540        struct rockchip_usb2phy *rphy = dev_get_drvdata(rport->phy->dev.parent);
 541        static unsigned int cable;
 542        unsigned long delay;
 543        bool vbus_attach, sch_work, notify_charger;
 544
 545        if (rport->utmi_avalid)
 546                vbus_attach = property_enabled(rphy->grf,
 547                                               &rport->port_cfg->utmi_avalid);
 548        else
 549                vbus_attach = property_enabled(rphy->grf,
 550                                               &rport->port_cfg->utmi_bvalid);
 551
 552        sch_work = false;
 553        notify_charger = false;
 554        delay = OTG_SCHEDULE_DELAY;
 555        dev_dbg(&rport->phy->dev, "%s otg sm work\n",
 556                usb_otg_state_string(rport->state));
 557
 558        switch (rport->state) {
 559        case OTG_STATE_UNDEFINED:
 560                rport->state = OTG_STATE_B_IDLE;
 561                if (!vbus_attach)
 562                        rockchip_usb2phy_power_off(rport->phy);
 563                /* fall through */
 564        case OTG_STATE_B_IDLE:
 565                if (extcon_get_state(rphy->edev, EXTCON_USB_HOST) > 0) {
 566                        dev_dbg(&rport->phy->dev, "usb otg host connect\n");
 567                        rport->state = OTG_STATE_A_HOST;
 568                        rockchip_usb2phy_power_on(rport->phy);
 569                        return;
 570                } else if (vbus_attach) {
 571                        dev_dbg(&rport->phy->dev, "vbus_attach\n");
 572                        switch (rphy->chg_state) {
 573                        case USB_CHG_STATE_UNDEFINED:
 574                                schedule_delayed_work(&rport->chg_work, 0);
 575                                return;
 576                        case USB_CHG_STATE_DETECTED:
 577                                switch (rphy->chg_type) {
 578                                case POWER_SUPPLY_TYPE_USB:
 579                                        dev_dbg(&rport->phy->dev, "sdp cable is connected\n");
 580                                        rockchip_usb2phy_power_on(rport->phy);
 581                                        rport->state = OTG_STATE_B_PERIPHERAL;
 582                                        notify_charger = true;
 583                                        sch_work = true;
 584                                        cable = EXTCON_CHG_USB_SDP;
 585                                        break;
 586                                case POWER_SUPPLY_TYPE_USB_DCP:
 587                                        dev_dbg(&rport->phy->dev, "dcp cable is connected\n");
 588                                        rockchip_usb2phy_power_off(rport->phy);
 589                                        notify_charger = true;
 590                                        sch_work = true;
 591                                        cable = EXTCON_CHG_USB_DCP;
 592                                        break;
 593                                case POWER_SUPPLY_TYPE_USB_CDP:
 594                                        dev_dbg(&rport->phy->dev, "cdp cable is connected\n");
 595                                        rockchip_usb2phy_power_on(rport->phy);
 596                                        rport->state = OTG_STATE_B_PERIPHERAL;
 597                                        notify_charger = true;
 598                                        sch_work = true;
 599                                        cable = EXTCON_CHG_USB_CDP;
 600                                        break;
 601                                default:
 602                                        break;
 603                                }
 604                                break;
 605                        default:
 606                                break;
 607                        }
 608                } else {
 609                        notify_charger = true;
 610                        rphy->chg_state = USB_CHG_STATE_UNDEFINED;
 611                        rphy->chg_type = POWER_SUPPLY_TYPE_UNKNOWN;
 612                }
 613
 614                if (rport->vbus_attached != vbus_attach) {
 615                        rport->vbus_attached = vbus_attach;
 616
 617                        if (notify_charger && rphy->edev) {
 618                                extcon_set_state_sync(rphy->edev,
 619                                                        cable, vbus_attach);
 620                                if (cable == EXTCON_CHG_USB_SDP)
 621                                        extcon_set_state_sync(rphy->edev,
 622                                                              EXTCON_USB,
 623                                                              vbus_attach);
 624                        }
 625                }
 626                break;
 627        case OTG_STATE_B_PERIPHERAL:
 628                if (!vbus_attach) {
 629                        dev_dbg(&rport->phy->dev, "usb disconnect\n");
 630                        rphy->chg_state = USB_CHG_STATE_UNDEFINED;
 631                        rphy->chg_type = POWER_SUPPLY_TYPE_UNKNOWN;
 632                        rport->state = OTG_STATE_B_IDLE;
 633                        delay = 0;
 634                        rockchip_usb2phy_power_off(rport->phy);
 635                }
 636                sch_work = true;
 637                break;
 638        case OTG_STATE_A_HOST:
 639                if (extcon_get_state(rphy->edev, EXTCON_USB_HOST) == 0) {
 640                        dev_dbg(&rport->phy->dev, "usb otg host disconnect\n");
 641                        rport->state = OTG_STATE_B_IDLE;
 642                        rockchip_usb2phy_power_off(rport->phy);
 643                }
 644                break;
 645        default:
 646                break;
 647        }
 648
 649        if (sch_work)
 650                schedule_delayed_work(&rport->otg_sm_work, delay);
 651}
 652
 653static const char *chg_to_string(enum power_supply_type chg_type)
 654{
 655        switch (chg_type) {
 656        case POWER_SUPPLY_TYPE_USB:
 657                return "USB_SDP_CHARGER";
 658        case POWER_SUPPLY_TYPE_USB_DCP:
 659                return "USB_DCP_CHARGER";
 660        case POWER_SUPPLY_TYPE_USB_CDP:
 661                return "USB_CDP_CHARGER";
 662        default:
 663                return "INVALID_CHARGER";
 664        }
 665}
 666
 667static void rockchip_chg_enable_dcd(struct rockchip_usb2phy *rphy,
 668                                    bool en)
 669{
 670        struct regmap *base = get_reg_base(rphy);
 671
 672        property_enable(base, &rphy->phy_cfg->chg_det.rdm_pdwn_en, en);
 673        property_enable(base, &rphy->phy_cfg->chg_det.idp_src_en, en);
 674}
 675
 676static void rockchip_chg_enable_primary_det(struct rockchip_usb2phy *rphy,
 677                                            bool en)
 678{
 679        struct regmap *base = get_reg_base(rphy);
 680
 681        property_enable(base, &rphy->phy_cfg->chg_det.vdp_src_en, en);
 682        property_enable(base, &rphy->phy_cfg->chg_det.idm_sink_en, en);
 683}
 684
 685static void rockchip_chg_enable_secondary_det(struct rockchip_usb2phy *rphy,
 686                                              bool en)
 687{
 688        struct regmap *base = get_reg_base(rphy);
 689
 690        property_enable(base, &rphy->phy_cfg->chg_det.vdm_src_en, en);
 691        property_enable(base, &rphy->phy_cfg->chg_det.idp_sink_en, en);
 692}
 693
 694#define CHG_DCD_POLL_TIME       (100 * HZ / 1000)
 695#define CHG_DCD_MAX_RETRIES     6
 696#define CHG_PRIMARY_DET_TIME    (40 * HZ / 1000)
 697#define CHG_SECONDARY_DET_TIME  (40 * HZ / 1000)
 698static void rockchip_chg_detect_work(struct work_struct *work)
 699{
 700        struct rockchip_usb2phy_port *rport =
 701                container_of(work, struct rockchip_usb2phy_port, chg_work.work);
 702        struct rockchip_usb2phy *rphy = dev_get_drvdata(rport->phy->dev.parent);
 703        struct regmap *base = get_reg_base(rphy);
 704        bool is_dcd, tmout, vout;
 705        unsigned long delay;
 706
 707        dev_dbg(&rport->phy->dev, "chg detection work state = %d\n",
 708                rphy->chg_state);
 709        switch (rphy->chg_state) {
 710        case USB_CHG_STATE_UNDEFINED:
 711                if (!rport->suspended)
 712                        rockchip_usb2phy_power_off(rport->phy);
 713                /* put the controller in non-driving mode */
 714                property_enable(base, &rphy->phy_cfg->chg_det.opmode, false);
 715                /* Start DCD processing stage 1 */
 716                rockchip_chg_enable_dcd(rphy, true);
 717                rphy->chg_state = USB_CHG_STATE_WAIT_FOR_DCD;
 718                rphy->dcd_retries = 0;
 719                delay = CHG_DCD_POLL_TIME;
 720                break;
 721        case USB_CHG_STATE_WAIT_FOR_DCD:
 722                /* get data contact detection status */
 723                is_dcd = property_enabled(rphy->grf,
 724                                          &rphy->phy_cfg->chg_det.dp_det);
 725                tmout = ++rphy->dcd_retries == CHG_DCD_MAX_RETRIES;
 726                /* stage 2 */
 727                if (is_dcd || tmout) {
 728                        /* stage 4 */
 729                        /* Turn off DCD circuitry */
 730                        rockchip_chg_enable_dcd(rphy, false);
 731                        /* Voltage Source on DP, Probe on DM */
 732                        rockchip_chg_enable_primary_det(rphy, true);
 733                        delay = CHG_PRIMARY_DET_TIME;
 734                        rphy->chg_state = USB_CHG_STATE_DCD_DONE;
 735                } else {
 736                        /* stage 3 */
 737                        delay = CHG_DCD_POLL_TIME;
 738                }
 739                break;
 740        case USB_CHG_STATE_DCD_DONE:
 741                vout = property_enabled(rphy->grf,
 742                                        &rphy->phy_cfg->chg_det.cp_det);
 743                rockchip_chg_enable_primary_det(rphy, false);
 744                if (vout) {
 745                        /* Voltage Source on DM, Probe on DP  */
 746                        rockchip_chg_enable_secondary_det(rphy, true);
 747                        delay = CHG_SECONDARY_DET_TIME;
 748                        rphy->chg_state = USB_CHG_STATE_PRIMARY_DONE;
 749                } else {
 750                        if (rphy->dcd_retries == CHG_DCD_MAX_RETRIES) {
 751                                /* floating charger found */
 752                                rphy->chg_type = POWER_SUPPLY_TYPE_USB_DCP;
 753                                rphy->chg_state = USB_CHG_STATE_DETECTED;
 754                                delay = 0;
 755                        } else {
 756                                rphy->chg_type = POWER_SUPPLY_TYPE_USB;
 757                                rphy->chg_state = USB_CHG_STATE_DETECTED;
 758                                delay = 0;
 759                        }
 760                }
 761                break;
 762        case USB_CHG_STATE_PRIMARY_DONE:
 763                vout = property_enabled(rphy->grf,
 764                                        &rphy->phy_cfg->chg_det.dcp_det);
 765                /* Turn off voltage source */
 766                rockchip_chg_enable_secondary_det(rphy, false);
 767                if (vout)
 768                        rphy->chg_type = POWER_SUPPLY_TYPE_USB_DCP;
 769                else
 770                        rphy->chg_type = POWER_SUPPLY_TYPE_USB_CDP;
 771                /* fall through */
 772        case USB_CHG_STATE_SECONDARY_DONE:
 773                rphy->chg_state = USB_CHG_STATE_DETECTED;
 774                delay = 0;
 775                /* fall through */
 776        case USB_CHG_STATE_DETECTED:
 777                /* put the controller in normal mode */
 778                property_enable(base, &rphy->phy_cfg->chg_det.opmode, true);
 779                rockchip_usb2phy_otg_sm_work(&rport->otg_sm_work.work);
 780                dev_info(&rport->phy->dev, "charger = %s\n",
 781                         chg_to_string(rphy->chg_type));
 782                return;
 783        default:
 784                return;
 785        }
 786
 787        schedule_delayed_work(&rport->chg_work, delay);
 788}
 789
 790/*
 791 * The function manage host-phy port state and suspend/resume phy port
 792 * to save power.
 793 *
 794 * we rely on utmi_linestate and utmi_hostdisconnect to identify whether
 795 * devices is disconnect or not. Besides, we do not need care it is FS/LS
 796 * disconnected or HS disconnected, actually, we just only need get the
 797 * device is disconnected at last through rearm the delayed work,
 798 * to suspend the phy port in _PHY_STATE_DISCONNECT_ case.
 799 *
 800 * NOTE: It may invoke *phy_powr_off or *phy_power_on which will invoke
 801 * some clk related APIs, so do not invoke it from interrupt context directly.
 802 */
 803static void rockchip_usb2phy_sm_work(struct work_struct *work)
 804{
 805        struct rockchip_usb2phy_port *rport =
 806                container_of(work, struct rockchip_usb2phy_port, sm_work.work);
 807        struct rockchip_usb2phy *rphy = dev_get_drvdata(rport->phy->dev.parent);
 808        unsigned int sh = rport->port_cfg->utmi_hstdet.bitend -
 809                          rport->port_cfg->utmi_hstdet.bitstart + 1;
 810        unsigned int ul, uhd, state;
 811        unsigned int ul_mask, uhd_mask;
 812        int ret;
 813
 814        mutex_lock(&rport->mutex);
 815
 816        ret = regmap_read(rphy->grf, rport->port_cfg->utmi_ls.offset, &ul);
 817        if (ret < 0)
 818                goto next_schedule;
 819
 820        ret = regmap_read(rphy->grf, rport->port_cfg->utmi_hstdet.offset, &uhd);
 821        if (ret < 0)
 822                goto next_schedule;
 823
 824        uhd_mask = GENMASK(rport->port_cfg->utmi_hstdet.bitend,
 825                           rport->port_cfg->utmi_hstdet.bitstart);
 826        ul_mask = GENMASK(rport->port_cfg->utmi_ls.bitend,
 827                          rport->port_cfg->utmi_ls.bitstart);
 828
 829        /* stitch on utmi_ls and utmi_hstdet as phy state */
 830        state = ((uhd & uhd_mask) >> rport->port_cfg->utmi_hstdet.bitstart) |
 831                (((ul & ul_mask) >> rport->port_cfg->utmi_ls.bitstart) << sh);
 832
 833        switch (state) {
 834        case PHY_STATE_HS_ONLINE:
 835                dev_dbg(&rport->phy->dev, "HS online\n");
 836                break;
 837        case PHY_STATE_FS_LS_ONLINE:
 838                /*
 839                 * For FS/LS device, the online state share with connect state
 840                 * from utmi_ls and utmi_hstdet register, so we distinguish
 841                 * them via suspended flag.
 842                 *
 843                 * Plus, there are two cases, one is D- Line pull-up, and D+
 844                 * line pull-down, the state is 4; another is D+ line pull-up,
 845                 * and D- line pull-down, the state is 2.
 846                 */
 847                if (!rport->suspended) {
 848                        /* D- line pull-up, D+ line pull-down */
 849                        dev_dbg(&rport->phy->dev, "FS/LS online\n");
 850                        break;
 851                }
 852                /* fall through */
 853        case PHY_STATE_CONNECT:
 854                if (rport->suspended) {
 855                        dev_dbg(&rport->phy->dev, "Connected\n");
 856                        rockchip_usb2phy_power_on(rport->phy);
 857                        rport->suspended = false;
 858                } else {
 859                        /* D+ line pull-up, D- line pull-down */
 860                        dev_dbg(&rport->phy->dev, "FS/LS online\n");
 861                }
 862                break;
 863        case PHY_STATE_DISCONNECT:
 864                if (!rport->suspended) {
 865                        dev_dbg(&rport->phy->dev, "Disconnected\n");
 866                        rockchip_usb2phy_power_off(rport->phy);
 867                        rport->suspended = true;
 868                }
 869
 870                /*
 871                 * activate the linestate detection to get the next device
 872                 * plug-in irq.
 873                 */
 874                property_enable(rphy->grf, &rport->port_cfg->ls_det_clr, true);
 875                property_enable(rphy->grf, &rport->port_cfg->ls_det_en, true);
 876
 877                /*
 878                 * we don't need to rearm the delayed work when the phy port
 879                 * is suspended.
 880                 */
 881                mutex_unlock(&rport->mutex);
 882                return;
 883        default:
 884                dev_dbg(&rport->phy->dev, "unknown phy state\n");
 885                break;
 886        }
 887
 888next_schedule:
 889        mutex_unlock(&rport->mutex);
 890        schedule_delayed_work(&rport->sm_work, SCHEDULE_DELAY);
 891}
 892
 893static irqreturn_t rockchip_usb2phy_linestate_irq(int irq, void *data)
 894{
 895        struct rockchip_usb2phy_port *rport = data;
 896        struct rockchip_usb2phy *rphy = dev_get_drvdata(rport->phy->dev.parent);
 897
 898        if (!property_enabled(rphy->grf, &rport->port_cfg->ls_det_st))
 899                return IRQ_NONE;
 900
 901        mutex_lock(&rport->mutex);
 902
 903        /* disable linestate detect irq and clear its status */
 904        property_enable(rphy->grf, &rport->port_cfg->ls_det_en, false);
 905        property_enable(rphy->grf, &rport->port_cfg->ls_det_clr, true);
 906
 907        mutex_unlock(&rport->mutex);
 908
 909        /*
 910         * In this case for host phy port, a new device is plugged in,
 911         * meanwhile, if the phy port is suspended, we need rearm the work to
 912         * resume it and mange its states; otherwise, we do nothing about that.
 913         */
 914        if (rport->suspended && rport->port_id == USB2PHY_PORT_HOST)
 915                rockchip_usb2phy_sm_work(&rport->sm_work.work);
 916
 917        return IRQ_HANDLED;
 918}
 919
 920static irqreturn_t rockchip_usb2phy_bvalid_irq(int irq, void *data)
 921{
 922        struct rockchip_usb2phy_port *rport = data;
 923        struct rockchip_usb2phy *rphy = dev_get_drvdata(rport->phy->dev.parent);
 924
 925        if (!property_enabled(rphy->grf, &rport->port_cfg->bvalid_det_st))
 926                return IRQ_NONE;
 927
 928        mutex_lock(&rport->mutex);
 929
 930        /* clear bvalid detect irq pending status */
 931        property_enable(rphy->grf, &rport->port_cfg->bvalid_det_clr, true);
 932
 933        mutex_unlock(&rport->mutex);
 934
 935        rockchip_usb2phy_otg_sm_work(&rport->otg_sm_work.work);
 936
 937        return IRQ_HANDLED;
 938}
 939
 940static irqreturn_t rockchip_usb2phy_otg_mux_irq(int irq, void *data)
 941{
 942        struct rockchip_usb2phy_port *rport = data;
 943        struct rockchip_usb2phy *rphy = dev_get_drvdata(rport->phy->dev.parent);
 944
 945        if (property_enabled(rphy->grf, &rport->port_cfg->bvalid_det_st))
 946                return rockchip_usb2phy_bvalid_irq(irq, data);
 947        else
 948                return IRQ_NONE;
 949}
 950
 951static int rockchip_usb2phy_host_port_init(struct rockchip_usb2phy *rphy,
 952                                           struct rockchip_usb2phy_port *rport,
 953                                           struct device_node *child_np)
 954{
 955        int ret;
 956
 957        rport->port_id = USB2PHY_PORT_HOST;
 958        rport->port_cfg = &rphy->phy_cfg->port_cfgs[USB2PHY_PORT_HOST];
 959        rport->suspended = true;
 960
 961        mutex_init(&rport->mutex);
 962        INIT_DELAYED_WORK(&rport->sm_work, rockchip_usb2phy_sm_work);
 963
 964        rport->ls_irq = of_irq_get_byname(child_np, "linestate");
 965        if (rport->ls_irq < 0) {
 966                dev_err(rphy->dev, "no linestate irq provided\n");
 967                return rport->ls_irq;
 968        }
 969
 970        ret = devm_request_threaded_irq(rphy->dev, rport->ls_irq, NULL,
 971                                        rockchip_usb2phy_linestate_irq,
 972                                        IRQF_ONESHOT,
 973                                        "rockchip_usb2phy", rport);
 974        if (ret) {
 975                dev_err(rphy->dev, "failed to request linestate irq handle\n");
 976                return ret;
 977        }
 978
 979        return 0;
 980}
 981
 982static int rockchip_otg_event(struct notifier_block *nb,
 983                              unsigned long event, void *ptr)
 984{
 985        struct rockchip_usb2phy_port *rport =
 986                container_of(nb, struct rockchip_usb2phy_port, event_nb);
 987
 988        schedule_delayed_work(&rport->otg_sm_work, OTG_SCHEDULE_DELAY);
 989
 990        return NOTIFY_DONE;
 991}
 992
 993static int rockchip_usb2phy_otg_port_init(struct rockchip_usb2phy *rphy,
 994                                          struct rockchip_usb2phy_port *rport,
 995                                          struct device_node *child_np)
 996{
 997        int ret;
 998
 999        rport->port_id = USB2PHY_PORT_OTG;
1000        rport->port_cfg = &rphy->phy_cfg->port_cfgs[USB2PHY_PORT_OTG];
1001        rport->state = OTG_STATE_UNDEFINED;
1002
1003        /*
1004         * set suspended flag to true, but actually don't
1005         * put phy in suspend mode, it aims to enable usb
1006         * phy and clock in power_on() called by usb controller
1007         * driver during probe.
1008         */
1009        rport->suspended = true;
1010        rport->vbus_attached = false;
1011
1012        mutex_init(&rport->mutex);
1013
1014        rport->mode = of_usb_get_dr_mode_by_phy(child_np, -1);
1015        if (rport->mode == USB_DR_MODE_HOST ||
1016            rport->mode == USB_DR_MODE_UNKNOWN) {
1017                ret = 0;
1018                goto out;
1019        }
1020
1021        INIT_DELAYED_WORK(&rport->chg_work, rockchip_chg_detect_work);
1022        INIT_DELAYED_WORK(&rport->otg_sm_work, rockchip_usb2phy_otg_sm_work);
1023
1024        rport->utmi_avalid =
1025                of_property_read_bool(child_np, "rockchip,utmi-avalid");
1026
1027        /*
1028         * Some SoCs use one interrupt with otg-id/otg-bvalid/linestate
1029         * interrupts muxed together, so probe the otg-mux interrupt first,
1030         * if not found, then look for the regular interrupts one by one.
1031         */
1032        rport->otg_mux_irq = of_irq_get_byname(child_np, "otg-mux");
1033        if (rport->otg_mux_irq > 0) {
1034                ret = devm_request_threaded_irq(rphy->dev, rport->otg_mux_irq,
1035                                                NULL,
1036                                                rockchip_usb2phy_otg_mux_irq,
1037                                                IRQF_ONESHOT,
1038                                                "rockchip_usb2phy_otg",
1039                                                rport);
1040                if (ret) {
1041                        dev_err(rphy->dev,
1042                                "failed to request otg-mux irq handle\n");
1043                        goto out;
1044                }
1045        } else {
1046                rport->bvalid_irq = of_irq_get_byname(child_np, "otg-bvalid");
1047                if (rport->bvalid_irq < 0) {
1048                        dev_err(rphy->dev, "no vbus valid irq provided\n");
1049                        ret = rport->bvalid_irq;
1050                        goto out;
1051                }
1052
1053                ret = devm_request_threaded_irq(rphy->dev, rport->bvalid_irq,
1054                                                NULL,
1055                                                rockchip_usb2phy_bvalid_irq,
1056                                                IRQF_ONESHOT,
1057                                                "rockchip_usb2phy_bvalid",
1058                                                rport);
1059                if (ret) {
1060                        dev_err(rphy->dev,
1061                                "failed to request otg-bvalid irq handle\n");
1062                        goto out;
1063                }
1064        }
1065
1066        if (!IS_ERR(rphy->edev)) {
1067                rport->event_nb.notifier_call = rockchip_otg_event;
1068
1069                ret = devm_extcon_register_notifier(rphy->dev, rphy->edev,
1070                                        EXTCON_USB_HOST, &rport->event_nb);
1071                if (ret)
1072                        dev_err(rphy->dev, "register USB HOST notifier failed\n");
1073        }
1074
1075out:
1076        return ret;
1077}
1078
1079static int rockchip_usb2phy_probe(struct platform_device *pdev)
1080{
1081        struct device *dev = &pdev->dev;
1082        struct device_node *np = dev->of_node;
1083        struct device_node *child_np;
1084        struct phy_provider *provider;
1085        struct rockchip_usb2phy *rphy;
1086        const struct rockchip_usb2phy_cfg *phy_cfgs;
1087        const struct of_device_id *match;
1088        unsigned int reg;
1089        int index, ret;
1090
1091        rphy = devm_kzalloc(dev, sizeof(*rphy), GFP_KERNEL);
1092        if (!rphy)
1093                return -ENOMEM;
1094
1095        match = of_match_device(dev->driver->of_match_table, dev);
1096        if (!match || !match->data) {
1097                dev_err(dev, "phy configs are not assigned!\n");
1098                return -EINVAL;
1099        }
1100
1101        if (!dev->parent || !dev->parent->of_node)
1102                return -EINVAL;
1103
1104        rphy->grf = syscon_node_to_regmap(dev->parent->of_node);
1105        if (IS_ERR(rphy->grf))
1106                return PTR_ERR(rphy->grf);
1107
1108        if (of_device_is_compatible(np, "rockchip,rv1108-usb2phy")) {
1109                rphy->usbgrf =
1110                        syscon_regmap_lookup_by_phandle(dev->of_node,
1111                                                        "rockchip,usbgrf");
1112                if (IS_ERR(rphy->usbgrf))
1113                        return PTR_ERR(rphy->usbgrf);
1114        } else {
1115                rphy->usbgrf = NULL;
1116        }
1117
1118        if (of_property_read_u32(np, "reg", &reg)) {
1119                dev_err(dev, "the reg property is not assigned in %s node\n",
1120                        np->name);
1121                return -EINVAL;
1122        }
1123
1124        rphy->dev = dev;
1125        phy_cfgs = match->data;
1126        rphy->chg_state = USB_CHG_STATE_UNDEFINED;
1127        rphy->chg_type = POWER_SUPPLY_TYPE_UNKNOWN;
1128        platform_set_drvdata(pdev, rphy);
1129
1130        ret = rockchip_usb2phy_extcon_register(rphy);
1131        if (ret)
1132                return ret;
1133
1134        /* find out a proper config which can be matched with dt. */
1135        index = 0;
1136        while (phy_cfgs[index].reg) {
1137                if (phy_cfgs[index].reg == reg) {
1138                        rphy->phy_cfg = &phy_cfgs[index];
1139                        break;
1140                }
1141
1142                ++index;
1143        }
1144
1145        if (!rphy->phy_cfg) {
1146                dev_err(dev, "no phy-config can be matched with %s node\n",
1147                        np->name);
1148                return -EINVAL;
1149        }
1150
1151        rphy->clk = of_clk_get_by_name(np, "phyclk");
1152        if (!IS_ERR(rphy->clk)) {
1153                clk_prepare_enable(rphy->clk);
1154        } else {
1155                dev_info(&pdev->dev, "no phyclk specified\n");
1156                rphy->clk = NULL;
1157        }
1158
1159        ret = rockchip_usb2phy_clk480m_register(rphy);
1160        if (ret) {
1161                dev_err(dev, "failed to register 480m output clock\n");
1162                goto disable_clks;
1163        }
1164
1165        index = 0;
1166        for_each_available_child_of_node(np, child_np) {
1167                struct rockchip_usb2phy_port *rport = &rphy->ports[index];
1168                struct phy *phy;
1169
1170                /* This driver aims to support both otg-port and host-port */
1171                if (of_node_cmp(child_np->name, "host-port") &&
1172                    of_node_cmp(child_np->name, "otg-port"))
1173                        goto next_child;
1174
1175                phy = devm_phy_create(dev, child_np, &rockchip_usb2phy_ops);
1176                if (IS_ERR(phy)) {
1177                        dev_err(dev, "failed to create phy\n");
1178                        ret = PTR_ERR(phy);
1179                        goto put_child;
1180                }
1181
1182                rport->phy = phy;
1183                phy_set_drvdata(rport->phy, rport);
1184
1185                /* initialize otg/host port separately */
1186                if (!of_node_cmp(child_np->name, "host-port")) {
1187                        ret = rockchip_usb2phy_host_port_init(rphy, rport,
1188                                                              child_np);
1189                        if (ret)
1190                                goto put_child;
1191                } else {
1192                        ret = rockchip_usb2phy_otg_port_init(rphy, rport,
1193                                                             child_np);
1194                        if (ret)
1195                                goto put_child;
1196                }
1197
1198next_child:
1199                /* to prevent out of boundary */
1200                if (++index >= rphy->phy_cfg->num_ports)
1201                        break;
1202        }
1203
1204        provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
1205        return PTR_ERR_OR_ZERO(provider);
1206
1207put_child:
1208        of_node_put(child_np);
1209disable_clks:
1210        if (rphy->clk) {
1211                clk_disable_unprepare(rphy->clk);
1212                clk_put(rphy->clk);
1213        }
1214        return ret;
1215}
1216
1217static const struct rockchip_usb2phy_cfg rk3228_phy_cfgs[] = {
1218        {
1219                .reg = 0x760,
1220                .num_ports      = 2,
1221                .clkout_ctl     = { 0x0768, 4, 4, 1, 0 },
1222                .port_cfgs      = {
1223                        [USB2PHY_PORT_OTG] = {
1224                                .phy_sus        = { 0x0760, 15, 0, 0, 0x1d1 },
1225                                .bvalid_det_en  = { 0x0680, 3, 3, 0, 1 },
1226                                .bvalid_det_st  = { 0x0690, 3, 3, 0, 1 },
1227                                .bvalid_det_clr = { 0x06a0, 3, 3, 0, 1 },
1228                                .ls_det_en      = { 0x0680, 2, 2, 0, 1 },
1229                                .ls_det_st      = { 0x0690, 2, 2, 0, 1 },
1230                                .ls_det_clr     = { 0x06a0, 2, 2, 0, 1 },
1231                                .utmi_bvalid    = { 0x0480, 4, 4, 0, 1 },
1232                                .utmi_ls        = { 0x0480, 3, 2, 0, 1 },
1233                        },
1234                        [USB2PHY_PORT_HOST] = {
1235                                .phy_sus        = { 0x0764, 15, 0, 0, 0x1d1 },
1236                                .ls_det_en      = { 0x0680, 4, 4, 0, 1 },
1237                                .ls_det_st      = { 0x0690, 4, 4, 0, 1 },
1238                                .ls_det_clr     = { 0x06a0, 4, 4, 0, 1 }
1239                        }
1240                },
1241                .chg_det = {
1242                        .opmode         = { 0x0760, 3, 0, 5, 1 },
1243                        .cp_det         = { 0x0884, 4, 4, 0, 1 },
1244                        .dcp_det        = { 0x0884, 3, 3, 0, 1 },
1245                        .dp_det         = { 0x0884, 5, 5, 0, 1 },
1246                        .idm_sink_en    = { 0x0768, 8, 8, 0, 1 },
1247                        .idp_sink_en    = { 0x0768, 7, 7, 0, 1 },
1248                        .idp_src_en     = { 0x0768, 9, 9, 0, 1 },
1249                        .rdm_pdwn_en    = { 0x0768, 10, 10, 0, 1 },
1250                        .vdm_src_en     = { 0x0768, 12, 12, 0, 1 },
1251                        .vdp_src_en     = { 0x0768, 11, 11, 0, 1 },
1252                },
1253        },
1254        {
1255                .reg = 0x800,
1256                .num_ports      = 2,
1257                .clkout_ctl     = { 0x0808, 4, 4, 1, 0 },
1258                .port_cfgs      = {
1259                        [USB2PHY_PORT_OTG] = {
1260                                .phy_sus        = { 0x800, 15, 0, 0, 0x1d1 },
1261                                .ls_det_en      = { 0x0684, 0, 0, 0, 1 },
1262                                .ls_det_st      = { 0x0694, 0, 0, 0, 1 },
1263                                .ls_det_clr     = { 0x06a4, 0, 0, 0, 1 }
1264                        },
1265                        [USB2PHY_PORT_HOST] = {
1266                                .phy_sus        = { 0x804, 15, 0, 0, 0x1d1 },
1267                                .ls_det_en      = { 0x0684, 1, 1, 0, 1 },
1268                                .ls_det_st      = { 0x0694, 1, 1, 0, 1 },
1269                                .ls_det_clr     = { 0x06a4, 1, 1, 0, 1 }
1270                        }
1271                },
1272        },
1273        { /* sentinel */ }
1274};
1275
1276static const struct rockchip_usb2phy_cfg rk3328_phy_cfgs[] = {
1277        {
1278                .reg = 0x100,
1279                .num_ports      = 2,
1280                .clkout_ctl     = { 0x108, 4, 4, 1, 0 },
1281                .port_cfgs      = {
1282                        [USB2PHY_PORT_OTG] = {
1283                                .phy_sus        = { 0x0100, 15, 0, 0, 0x1d1 },
1284                                .bvalid_det_en  = { 0x0110, 2, 2, 0, 1 },
1285                                .bvalid_det_st  = { 0x0114, 2, 2, 0, 1 },
1286                                .bvalid_det_clr = { 0x0118, 2, 2, 0, 1 },
1287                                .ls_det_en      = { 0x0110, 0, 0, 0, 1 },
1288                                .ls_det_st      = { 0x0114, 0, 0, 0, 1 },
1289                                .ls_det_clr     = { 0x0118, 0, 0, 0, 1 },
1290                                .utmi_avalid    = { 0x0120, 10, 10, 0, 1 },
1291                                .utmi_bvalid    = { 0x0120, 9, 9, 0, 1 },
1292                                .utmi_ls        = { 0x0120, 5, 4, 0, 1 },
1293                        },
1294                        [USB2PHY_PORT_HOST] = {
1295                                .phy_sus        = { 0x104, 15, 0, 0, 0x1d1 },
1296                                .ls_det_en      = { 0x110, 1, 1, 0, 1 },
1297                                .ls_det_st      = { 0x114, 1, 1, 0, 1 },
1298                                .ls_det_clr     = { 0x118, 1, 1, 0, 1 },
1299                                .utmi_ls        = { 0x120, 17, 16, 0, 1 },
1300                                .utmi_hstdet    = { 0x120, 19, 19, 0, 1 }
1301                        }
1302                },
1303                .chg_det = {
1304                        .opmode         = { 0x0100, 3, 0, 5, 1 },
1305                        .cp_det         = { 0x0120, 24, 24, 0, 1 },
1306                        .dcp_det        = { 0x0120, 23, 23, 0, 1 },
1307                        .dp_det         = { 0x0120, 25, 25, 0, 1 },
1308                        .idm_sink_en    = { 0x0108, 8, 8, 0, 1 },
1309                        .idp_sink_en    = { 0x0108, 7, 7, 0, 1 },
1310                        .idp_src_en     = { 0x0108, 9, 9, 0, 1 },
1311                        .rdm_pdwn_en    = { 0x0108, 10, 10, 0, 1 },
1312                        .vdm_src_en     = { 0x0108, 12, 12, 0, 1 },
1313                        .vdp_src_en     = { 0x0108, 11, 11, 0, 1 },
1314                },
1315        },
1316        { /* sentinel */ }
1317};
1318
1319static const struct rockchip_usb2phy_cfg rk3366_phy_cfgs[] = {
1320        {
1321                .reg = 0x700,
1322                .num_ports      = 2,
1323                .clkout_ctl     = { 0x0724, 15, 15, 1, 0 },
1324                .port_cfgs      = {
1325                        [USB2PHY_PORT_HOST] = {
1326                                .phy_sus        = { 0x0728, 15, 0, 0, 0x1d1 },
1327                                .ls_det_en      = { 0x0680, 4, 4, 0, 1 },
1328                                .ls_det_st      = { 0x0690, 4, 4, 0, 1 },
1329                                .ls_det_clr     = { 0x06a0, 4, 4, 0, 1 },
1330                                .utmi_ls        = { 0x049c, 14, 13, 0, 1 },
1331                                .utmi_hstdet    = { 0x049c, 12, 12, 0, 1 }
1332                        }
1333                },
1334        },
1335        { /* sentinel */ }
1336};
1337
1338static const struct rockchip_usb2phy_cfg rk3399_phy_cfgs[] = {
1339        {
1340                .reg            = 0xe450,
1341                .num_ports      = 2,
1342                .clkout_ctl     = { 0xe450, 4, 4, 1, 0 },
1343                .port_cfgs      = {
1344                        [USB2PHY_PORT_OTG] = {
1345                                .phy_sus        = { 0xe454, 1, 0, 2, 1 },
1346                                .bvalid_det_en  = { 0xe3c0, 3, 3, 0, 1 },
1347                                .bvalid_det_st  = { 0xe3e0, 3, 3, 0, 1 },
1348                                .bvalid_det_clr = { 0xe3d0, 3, 3, 0, 1 },
1349                                .utmi_avalid    = { 0xe2ac, 7, 7, 0, 1 },
1350                                .utmi_bvalid    = { 0xe2ac, 12, 12, 0, 1 },
1351                        },
1352                        [USB2PHY_PORT_HOST] = {
1353                                .phy_sus        = { 0xe458, 1, 0, 0x2, 0x1 },
1354                                .ls_det_en      = { 0xe3c0, 6, 6, 0, 1 },
1355                                .ls_det_st      = { 0xe3e0, 6, 6, 0, 1 },
1356                                .ls_det_clr     = { 0xe3d0, 6, 6, 0, 1 },
1357                                .utmi_ls        = { 0xe2ac, 22, 21, 0, 1 },
1358                                .utmi_hstdet    = { 0xe2ac, 23, 23, 0, 1 }
1359                        }
1360                },
1361                .chg_det = {
1362                        .opmode         = { 0xe454, 3, 0, 5, 1 },
1363                        .cp_det         = { 0xe2ac, 2, 2, 0, 1 },
1364                        .dcp_det        = { 0xe2ac, 1, 1, 0, 1 },
1365                        .dp_det         = { 0xe2ac, 0, 0, 0, 1 },
1366                        .idm_sink_en    = { 0xe450, 8, 8, 0, 1 },
1367                        .idp_sink_en    = { 0xe450, 7, 7, 0, 1 },
1368                        .idp_src_en     = { 0xe450, 9, 9, 0, 1 },
1369                        .rdm_pdwn_en    = { 0xe450, 10, 10, 0, 1 },
1370                        .vdm_src_en     = { 0xe450, 12, 12, 0, 1 },
1371                        .vdp_src_en     = { 0xe450, 11, 11, 0, 1 },
1372                },
1373        },
1374        {
1375                .reg            = 0xe460,
1376                .num_ports      = 2,
1377                .clkout_ctl     = { 0xe460, 4, 4, 1, 0 },
1378                .port_cfgs      = {
1379                        [USB2PHY_PORT_OTG] = {
1380                                .phy_sus        = { 0xe464, 1, 0, 2, 1 },
1381                                .bvalid_det_en  = { 0xe3c0, 8, 8, 0, 1 },
1382                                .bvalid_det_st  = { 0xe3e0, 8, 8, 0, 1 },
1383                                .bvalid_det_clr = { 0xe3d0, 8, 8, 0, 1 },
1384                                .utmi_avalid    = { 0xe2ac, 10, 10, 0, 1 },
1385                                .utmi_bvalid    = { 0xe2ac, 16, 16, 0, 1 },
1386                        },
1387                        [USB2PHY_PORT_HOST] = {
1388                                .phy_sus        = { 0xe468, 1, 0, 0x2, 0x1 },
1389                                .ls_det_en      = { 0xe3c0, 11, 11, 0, 1 },
1390                                .ls_det_st      = { 0xe3e0, 11, 11, 0, 1 },
1391                                .ls_det_clr     = { 0xe3d0, 11, 11, 0, 1 },
1392                                .utmi_ls        = { 0xe2ac, 26, 25, 0, 1 },
1393                                .utmi_hstdet    = { 0xe2ac, 27, 27, 0, 1 }
1394                        }
1395                },
1396        },
1397        { /* sentinel */ }
1398};
1399
1400static const struct rockchip_usb2phy_cfg rv1108_phy_cfgs[] = {
1401        {
1402                .reg = 0x100,
1403                .num_ports      = 2,
1404                .clkout_ctl     = { 0x108, 4, 4, 1, 0 },
1405                .port_cfgs      = {
1406                        [USB2PHY_PORT_OTG] = {
1407                                .phy_sus        = { 0x0100, 15, 0, 0, 0x1d1 },
1408                                .bvalid_det_en  = { 0x0680, 3, 3, 0, 1 },
1409                                .bvalid_det_st  = { 0x0690, 3, 3, 0, 1 },
1410                                .bvalid_det_clr = { 0x06a0, 3, 3, 0, 1 },
1411                                .ls_det_en      = { 0x0680, 2, 2, 0, 1 },
1412                                .ls_det_st      = { 0x0690, 2, 2, 0, 1 },
1413                                .ls_det_clr     = { 0x06a0, 2, 2, 0, 1 },
1414                                .utmi_bvalid    = { 0x0804, 10, 10, 0, 1 },
1415                                .utmi_ls        = { 0x0804, 13, 12, 0, 1 },
1416                        },
1417                        [USB2PHY_PORT_HOST] = {
1418                                .phy_sus        = { 0x0104, 15, 0, 0, 0x1d1 },
1419                                .ls_det_en      = { 0x0680, 4, 4, 0, 1 },
1420                                .ls_det_st      = { 0x0690, 4, 4, 0, 1 },
1421                                .ls_det_clr     = { 0x06a0, 4, 4, 0, 1 },
1422                                .utmi_ls        = { 0x0804, 9, 8, 0, 1 },
1423                                .utmi_hstdet    = { 0x0804, 7, 7, 0, 1 }
1424                        }
1425                },
1426                .chg_det = {
1427                        .opmode         = { 0x0100, 3, 0, 5, 1 },
1428                        .cp_det         = { 0x0804, 1, 1, 0, 1 },
1429                        .dcp_det        = { 0x0804, 0, 0, 0, 1 },
1430                        .dp_det         = { 0x0804, 2, 2, 0, 1 },
1431                        .idm_sink_en    = { 0x0108, 8, 8, 0, 1 },
1432                        .idp_sink_en    = { 0x0108, 7, 7, 0, 1 },
1433                        .idp_src_en     = { 0x0108, 9, 9, 0, 1 },
1434                        .rdm_pdwn_en    = { 0x0108, 10, 10, 0, 1 },
1435                        .vdm_src_en     = { 0x0108, 12, 12, 0, 1 },
1436                        .vdp_src_en     = { 0x0108, 11, 11, 0, 1 },
1437                },
1438        },
1439        { /* sentinel */ }
1440};
1441
1442static const struct of_device_id rockchip_usb2phy_dt_match[] = {
1443        { .compatible = "rockchip,rk3228-usb2phy", .data = &rk3228_phy_cfgs },
1444        { .compatible = "rockchip,rk3328-usb2phy", .data = &rk3328_phy_cfgs },
1445        { .compatible = "rockchip,rk3366-usb2phy", .data = &rk3366_phy_cfgs },
1446        { .compatible = "rockchip,rk3399-usb2phy", .data = &rk3399_phy_cfgs },
1447        { .compatible = "rockchip,rv1108-usb2phy", .data = &rv1108_phy_cfgs },
1448        {}
1449};
1450MODULE_DEVICE_TABLE(of, rockchip_usb2phy_dt_match);
1451
1452static struct platform_driver rockchip_usb2phy_driver = {
1453        .probe          = rockchip_usb2phy_probe,
1454        .driver         = {
1455                .name   = "rockchip-usb2phy",
1456                .of_match_table = rockchip_usb2phy_dt_match,
1457        },
1458};
1459module_platform_driver(rockchip_usb2phy_driver);
1460
1461MODULE_AUTHOR("Frank Wang <frank.wang@rock-chips.com>");
1462MODULE_DESCRIPTION("Rockchip USB2.0 PHY driver");
1463MODULE_LICENSE("GPL v2");
1464