// SPDX-License-Identifier: GPL-2.0
/*
 * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
 *
 * Based on msm_serial.c, which is:
 * Copyright (C) 2007 Google, Inc.
 * Author: Robert Love <rlove@google.com>
 */

#if defined(CONFIG_SERIAL_VT8500_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
# define SUPPORT_SYSRQ
#endif

#include <linux/hrtimer.h>
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/ioport.h>
#include <linux/irq.h>
#include <linux/init.h>
#include <linux/console.h>
#include <linux/tty.h>
#include <linux/tty_flip.h>
#include <linux/serial_core.h>
#include <linux/serial.h>
#include <linux/slab.h>
#include <linux/clk.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/err.h>

/*
 * UART Register offsets
 */

#define VT8500_URTDR            0x0000  /* Transmit data */
#define VT8500_URRDR            0x0004  /* Receive data */
#define VT8500_URDIV            0x0008  /* Clock/Baud rate divisor */
#define VT8500_URLCR            0x000C  /* Line control */
#define VT8500_URICR            0x0010  /* IrDA control */
#define VT8500_URIER            0x0014  /* Interrupt enable */
#define VT8500_URISR            0x0018  /* Interrupt status */
#define VT8500_URUSR            0x001c  /* UART status */
#define VT8500_URFCR            0x0020  /* FIFO control */
#define VT8500_URFIDX           0x0024  /* FIFO index */
#define VT8500_URBKR            0x0028  /* Break signal count */
#define VT8500_URTOD            0x002c  /* Time out divisor */
#define VT8500_TXFIFO           0x1000  /* Transmit FIFO (16x8) */
#define VT8500_RXFIFO           0x1020  /* Receive FIFO (16x10) */

/*
 * Interrupt enable and status bits
 */

#define TXDE    (1 << 0)        /* Tx Data empty */
#define RXDF    (1 << 1)        /* Rx Data full */
#define TXFAE   (1 << 2)        /* Tx FIFO almost empty */
#define TXFE    (1 << 3)        /* Tx FIFO empty */
#define RXFAF   (1 << 4)        /* Rx FIFO almost full */
#define RXFF    (1 << 5)        /* Rx FIFO full */
#define TXUDR   (1 << 6)        /* Tx underrun */
#define RXOVER  (1 << 7)        /* Rx overrun */
#define PER     (1 << 8)        /* Parity error */
#define FER     (1 << 9)        /* Frame error */
#define TCTS    (1 << 10)       /* Toggle of CTS */
#define RXTOUT  (1 << 11)       /* Rx timeout */
#define BKDONE  (1 << 12)       /* Break signal done */
#define ERR     (1 << 13)       /* AHB error response */

#define RX_FIFO_INTS    (RXFAF | RXFF | RXOVER | PER | FER | RXTOUT)
#define TX_FIFO_INTS    (TXFAE | TXFE | TXUDR)

/*
 * Line control bits
 */

#define VT8500_TXEN     (1 << 0)        /* Enable transmit logic */
#define VT8500_RXEN     (1 << 1)        /* Enable receive logic */
#define VT8500_CS8      (1 << 2)        /* 8-bit data length (vs. 7-bit) */
#define VT8500_CSTOPB   (1 << 3)        /* 2 stop bits (vs. 1) */
#define VT8500_PARENB   (1 << 4)        /* Enable parity */
#define VT8500_PARODD   (1 << 5)        /* Odd parity (vs. even) */
#define VT8500_RTS      (1 << 6)        /* Ready to send */
#define VT8500_LOOPBK   (1 << 7)        /* Enable internal loopback */
#define VT8500_DMA      (1 << 8)        /* Enable DMA mode (needs FIFO) */
#define VT8500_BREAK    (1 << 9)        /* Initiate break signal */
#define VT8500_PSLVERR  (1 << 10)       /* APB error upon empty RX FIFO read */
#define VT8500_SWRTSCTS (1 << 11)       /* Software-controlled RTS/CTS */

/*
 * Capability flags (driver-internal)
 */

#define VT8500_HAS_SWRTSCTS_SWITCH      (1 << 1)

#define VT8500_RECOMMENDED_CLK          12000000
#define VT8500_OVERSAMPLING_DIVISOR     13
#define VT8500_MAX_PORTS        6

struct vt8500_port {
        struct uart_port        uart;
        char                    name[16];
        struct clk              *clk;
        unsigned int            clk_predivisor;
        unsigned int            ier;
        unsigned int            vt8500_uart_flags;
};

/*
 * we use this variable to keep track of which ports
 * have been allocated as we can't use pdev->id in
 * devicetree
 */
static DECLARE_BITMAP(vt8500_ports_in_use, VT8500_MAX_PORTS);

static inline void vt8500_write(struct uart_port *port, unsigned int val,
                             unsigned int off)
{
        writel(val, port->membase + off);
}

static inline unsigned int vt8500_read(struct uart_port *port, unsigned int off)
{
        return readl(port->membase + off);
}

static void vt8500_stop_tx(struct uart_port *port)
{
        struct vt8500_port *vt8500_port = container_of(port,
                                                       struct vt8500_port,
                                                       uart);

        vt8500_port->ier &= ~TX_FIFO_INTS;
        vt8500_write(port, vt8500_port->ier, VT8500_URIER);
}

static void vt8500_stop_rx(struct uart_port *port)
{
        struct vt8500_port *vt8500_port = container_of(port,
                                                       struct vt8500_port,
                                                       uart);

        vt8500_port->ier &= ~RX_FIFO_INTS;
        vt8500_write(port, vt8500_port->ier, VT8500_URIER);
}

static void vt8500_enable_ms(struct uart_port *port)
{
        struct vt8500_port *vt8500_port = container_of(port,
                                                       struct vt8500_port,
                                                       uart);

        vt8500_port->ier |= TCTS;
        vt8500_write(port, vt8500_port->ier, VT8500_URIER);
}

static void handle_rx(struct uart_port *port)
{
        struct tty_port *tport = &port->state->port;

        /*
         * Handle overrun
         */
        if ((vt8500_read(port, VT8500_URISR) & RXOVER)) {
                port->icount.overrun++;
                tty_insert_flip_char(tport, 0, TTY_OVERRUN);
        }

        /* and now the main RX loop */
        while (vt8500_read(port, VT8500_URFIDX) & 0x1f00) {
                unsigned int c;
                char flag = TTY_NORMAL;

                c = readw(port->membase + VT8500_RXFIFO) & 0x3ff;

                /* Mask conditions we're ignorning. */
                c &= ~port->read_status_mask;

                if (c & FER) {
                        port->icount.frame++;
                        flag = TTY_FRAME;
                } else if (c & PER) {
                        port->icount.parity++;
                        flag = TTY_PARITY;
                }
                port->icount.rx++;

                if (!uart_handle_sysrq_char(port, c))
                        tty_insert_flip_char(tport, c, flag);
        }

        spin_unlock(&port->lock);
        tty_flip_buffer_push(tport);
        spin_lock(&port->lock);
}

static void handle_tx(struct uart_port *port)
{
        struct circ_buf *xmit = &port->state->xmit;

        if (port->x_char) {
                writeb(port->x_char, port->membase + VT8500_TXFIFO);
                port->icount.tx++;
                port->x_char = 0;
        }
        if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
                vt8500_stop_tx(port);
                return;
        }

        while ((vt8500_read(port, VT8500_URFIDX) & 0x1f) < 16) {
                if (uart_circ_empty(xmit))
                        break;

                writeb(xmit->buf[xmit->tail], port->membase + VT8500_TXFIFO);

                xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
                port->icount.tx++;
        }

        if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
                uart_write_wakeup(port);

        if (uart_circ_empty(xmit))
                vt8500_stop_tx(port);
}

static void vt8500_start_tx(struct uart_port *port)
{
        struct vt8500_port *vt8500_port = container_of(port,
                                                       struct vt8500_port,
                                                       uart);

        vt8500_port->ier &= ~TX_FIFO_INTS;
        vt8500_write(port, vt8500_port->ier, VT8500_URIER);
        handle_tx(port);
        vt8500_port->ier |= TX_FIFO_INTS;
        vt8500_write(port, vt8500_port->ier, VT8500_URIER);
}

static void handle_delta_cts(struct uart_port *port)
{
        port->icount.cts++;
        wake_up_interruptible(&port->state->port.delta_msr_wait);
}

static irqreturn_t vt8500_irq(int irq, void *dev_id)
{
        struct uart_port *port = dev_id;
        unsigned long isr;

        spin_lock(&port->lock);
        isr = vt8500_read(port, VT8500_URISR);

        /* Acknowledge active status bits */
        vt8500_write(port, isr, VT8500_URISR);

        if (isr & RX_FIFO_INTS)
                handle_rx(port);
        if (isr & TX_FIFO_INTS)
                handle_tx(port);
        if (isr & TCTS)
                handle_delta_cts(port);

        spin_unlock(&port->lock);

        return IRQ_HANDLED;
}

static unsigned int vt8500_tx_empty(struct uart_port *port)
{
        return (vt8500_read(port, VT8500_URFIDX) & 0x1f) < 16 ?
                                                TIOCSER_TEMT : 0;
}

static unsigned int vt8500_get_mctrl(struct uart_port *port)
{
        unsigned int usr;

        usr = vt8500_read(port, VT8500_URUSR);
        if (usr & (1 << 4))
                return TIOCM_CTS;
        else
                return 0;
}

static void vt8500_set_mctrl(struct uart_port *port, unsigned int mctrl)
{
        unsigned int lcr = vt8500_read(port, VT8500_URLCR);

        if (mctrl & TIOCM_RTS)
                lcr |= VT8500_RTS;
        else
                lcr &= ~VT8500_RTS;

        vt8500_write(port, lcr, VT8500_URLCR);
}

static void vt8500_break_ctl(struct uart_port *port, int break_ctl)
{
        if (break_ctl)
                vt8500_write(port,
                             vt8500_read(port, VT8500_URLCR) | VT8500_BREAK,
                             VT8500_URLCR);
}

static int vt8500_set_baud_rate(struct uart_port *port, unsigned int baud)
{
        struct vt8500_port *vt8500_port =
                        container_of(port, struct vt8500_port, uart);
        unsigned long div;
        unsigned int loops = 1000;

        div = ((vt8500_port->clk_predivisor - 1) & 0xf) << 16;
        div |= (uart_get_divisor(port, baud) - 1) & 0x3ff;

        /* Effective baud rate */
        baud = port->uartclk / 16 / ((div & 0x3ff) + 1);

        while ((vt8500_read(port, VT8500_URUSR) & (1 << 5)) && --loops)
                cpu_relax();

        vt8500_write(port, div, VT8500_URDIV);

        /* Break signal timing depends on baud rate, update accordingly */
        vt8500_write(port, mult_frac(baud, 4096, 1000000), VT8500_URBKR);

        return baud;
}

static int vt8500_startup(struct uart_port *port)
{
        struct vt8500_port *vt8500_port =
                        container_of(port, struct vt8500_port, uart);
        int ret;

        snprintf(vt8500_port->name, sizeof(vt8500_port->name),
                 "vt8500_serial%d", port->line);

        ret = request_irq(port->irq, vt8500_irq, IRQF_TRIGGER_HIGH,
                          vt8500_port->name, port);
        if (unlikely(ret))
                return ret;

        vt8500_write(port, 0x03, VT8500_URLCR); /* enable TX & RX */

        return 0;
}

static void vt8500_shutdown(struct uart_port *port)
{
        struct vt8500_port *vt8500_port =
                        container_of(port, struct vt8500_port, uart);

        vt8500_port->ier = 0;

        /* disable interrupts and FIFOs */
        vt8500_write(&vt8500_port->uart, 0, VT8500_URIER);
        vt8500_write(&vt8500_port->uart, 0x880, VT8500_URFCR);
        free_irq(port->irq, port);
}

static void vt8500_set_termios(struct uart_port *port,
                               struct ktermios *termios,
                               struct ktermios *old)
{
        struct vt8500_port *vt8500_port =
                        container_of(port, struct vt8500_port, uart);
        unsigned long flags;
        unsigned int baud, lcr;
        unsigned int loops = 1000;

        spin_lock_irqsave(&port->lock, flags);

        /* calculate and set baud rate */
        baud = uart_get_baud_rate(port, termios, old, 900, 921600);
        baud = vt8500_set_baud_rate(port, baud);
        if (tty_termios_baud_rate(termios))
                tty_termios_encode_baud_rate(termios, baud, baud);

        /* calculate parity */
        lcr = vt8500_read(&vt8500_port->uart, VT8500_URLCR);
        lcr &= ~(VT8500_PARENB | VT8500_PARODD);
        if (termios->c_cflag & PARENB) {
                lcr |= VT8500_PARENB;
                termios->c_cflag &= ~CMSPAR;
                if (termios->c_cflag & PARODD)
                        lcr |= VT8500_PARODD;
        }

        /* calculate bits per char */
        lcr &= ~VT8500_CS8;
        switch (termios->c_cflag & CSIZE) {
        case CS7:
                break;
        case CS8:
        default:
                lcr |= VT8500_CS8;
                termios->c_cflag &= ~CSIZE;
                termios->c_cflag |= CS8;
                break;
        }

        /* calculate stop bits */
        lcr &= ~VT8500_CSTOPB;
        if (termios->c_cflag & CSTOPB)
                lcr |= VT8500_CSTOPB;

        lcr &= ~VT8500_SWRTSCTS;
        if (vt8500_port->vt8500_uart_flags & VT8500_HAS_SWRTSCTS_SWITCH)
                lcr |= VT8500_SWRTSCTS;

        /* set parity, bits per char, and stop bit */
        vt8500_write(&vt8500_port->uart, lcr, VT8500_URLCR);

        /* Configure status bits to ignore based on termio flags. */
        port->read_status_mask = 0;
        if (termios->c_iflag & IGNPAR)
                port->read_status_mask = FER | PER;

        uart_update_timeout(port, termios->c_cflag, baud);

        /* Reset FIFOs */
        vt8500_write(&vt8500_port->uart, 0x88c, VT8500_URFCR);
        while ((vt8500_read(&vt8500_port->uart, VT8500_URFCR) & 0xc)
                                                        && --loops)
                cpu_relax();

        /* Every possible FIFO-related interrupt */
        vt8500_port->ier = RX_FIFO_INTS | TX_FIFO_INTS;

        /*
         * CTS flow control
         */
        if (UART_ENABLE_MS(&vt8500_port->uart, termios->c_cflag))
                vt8500_port->ier |= TCTS;

        vt8500_write(&vt8500_port->uart, 0x881, VT8500_URFCR);
        vt8500_write(&vt8500_port->uart, vt8500_port->ier, VT8500_URIER);

        spin_unlock_irqrestore(&port->lock, flags);
}

static const char *vt8500_type(struct uart_port *port)
{
        struct vt8500_port *vt8500_port =
                        container_of(port, struct vt8500_port, uart);
        return vt8500_port->name;
}

static void vt8500_release_port(struct uart_port *port)
{
}

static int vt8500_request_port(struct uart_port *port)
{
        return 0;
}

static void vt8500_config_port(struct uart_port *port, int flags)
{
        port->type = PORT_VT8500;
}

static int vt8500_verify_port(struct uart_port *port,
                              struct serial_struct *ser)
{
        if (unlikely(ser->type != PORT_UNKNOWN && ser->type != PORT_VT8500))
                return -EINVAL;
        if (unlikely(port->irq != ser->irq))
                return -EINVAL;
        return 0;
}

static struct vt8500_port *vt8500_uart_ports[VT8500_MAX_PORTS];
static struct uart_driver vt8500_uart_driver;

#ifdef CONFIG_SERIAL_VT8500_CONSOLE

static void wait_for_xmitr(struct uart_port *port)
{
        unsigned int status, tmout = 10000;

        /* Wait up to 10ms for the character(s) to be sent. */
        do {
                status = vt8500_read(port, VT8500_URFIDX);

                if (--tmout == 0)
                        break;
                udelay(1);
        } while (status & 0x10);
}

static void vt8500_console_putchar(struct uart_port *port, int c)
{
        wait_for_xmitr(port);
        writeb(c, port->membase + VT8500_TXFIFO);
}

static void vt8500_console_write(struct console *co, const char *s,
                              unsigned int count)
{
        struct vt8500_port *vt8500_port = vt8500_uart_ports[co->index];
        unsigned long ier;

        BUG_ON(co->index < 0 || co->index >= vt8500_uart_driver.nr);

        ier = vt8500_read(&vt8500_port->uart, VT8500_URIER);
        vt8500_write(&vt8500_port->uart, VT8500_URIER, 0);

        uart_console_write(&vt8500_port->uart, s, count,
                           vt8500_console_putchar);

        /*
         *      Finally, wait for transmitter to become empty
         *      and switch back to FIFO
         */
        wait_for_xmitr(&vt8500_port->uart);
        vt8500_write(&vt8500_port->uart, VT8500_URIER, ier);
}

static int __init vt8500_console_setup(struct console *co, char *options)
{
        struct vt8500_port *vt8500_port;
        int baud = 9600;
        int bits = 8;
        int parity = 'n';
        int flow = 'n';

        if (unlikely(co->index >= vt8500_uart_driver.nr || co->index < 0))
                return -ENXIO;

        vt8500_port = vt8500_uart_ports[co->index];

        if (!vt8500_port)
                return -ENODEV;

        if (options)
                uart_parse_options(options, &baud, &parity, &bits, &flow);

        return uart_set_options(&vt8500_port->uart,
                                 co, baud, parity, bits, flow);
}

static struct console vt8500_console = {
        .name = "ttyWMT",
        .write = vt8500_console_write,
        .device = uart_console_device,
        .setup = vt8500_console_setup,
        .flags = CON_PRINTBUFFER,
        .index = -1,
        .data = &vt8500_uart_driver,
};

#define VT8500_CONSOLE  (&vt8500_console)

#else
#define VT8500_CONSOLE  NULL
#endif

#ifdef CONFIG_CONSOLE_POLL
static int vt8500_get_poll_char(struct uart_port *port)
{
        unsigned int status = vt8500_read(port, VT8500_URFIDX);

        if (!(status & 0x1f00))
                return NO_POLL_CHAR;

        return vt8500_read(port, VT8500_RXFIFO) & 0xff;
}

static void vt8500_put_poll_char(struct uart_port *port, unsigned char c)
{
        unsigned int status, tmout = 10000;

        do {
                status = vt8500_read(port, VT8500_URFIDX);

                if (--tmout == 0)
                        break;
                udelay(1);
        } while (status & 0x10);

        vt8500_write(port, c, VT8500_TXFIFO);
}
#endif

static const struct uart_ops vt8500_uart_pops = {
        .tx_empty       = vt8500_tx_empty,
        .set_mctrl      = vt8500_set_mctrl,
        .get_mctrl      = vt8500_get_mctrl,
        .stop_tx        = vt8500_stop_tx,
        .start_tx       = vt8500_start_tx,
        .stop_rx        = vt8500_stop_rx,
        .enable_ms      = vt8500_enable_ms,
        .break_ctl      = vt8500_break_ctl,
        .startup        = vt8500_startup,
        .shutdown       = vt8500_shutdown,
        .set_termios    = vt8500_set_termios,
        .type           = vt8500_type,
        .release_port   = vt8500_release_port,
        .request_port   = vt8500_request_port,
        .config_port    = vt8500_config_port,
        .verify_port    = vt8500_verify_port,
#ifdef CONFIG_CONSOLE_POLL
        .poll_get_char  = vt8500_get_poll_char,
        .poll_put_char  = vt8500_put_poll_char,
#endif
};

static struct uart_driver vt8500_uart_driver = {
        .owner          = THIS_MODULE,
        .driver_name    = "vt8500_serial",
        .dev_name       = "ttyWMT",
        .nr             = 6,
        .cons           = VT8500_CONSOLE,
};

static unsigned int vt8500_flags; /* none required so far */
static unsigned int wm8880_flags = VT8500_HAS_SWRTSCTS_SWITCH;

static const struct of_device_id wmt_dt_ids[] = {
        { .compatible = "via,vt8500-uart", .data = &vt8500_flags},
        { .compatible = "wm,wm8880-uart", .data = &wm8880_flags},
        {}
};

static int vt8500_serial_probe(struct platform_device *pdev)
{
        struct vt8500_port *vt8500_port;
        struct resource *mmres, *irqres;
        struct device_node *np = pdev->dev.of_node;
        const struct of_device_id *match;
        const unsigned int *flags;
        int ret;
        int port;

        match = of_match_device(wmt_dt_ids, &pdev->dev);
        if (!match)
                return -EINVAL;

        flags = match->data;

        mmres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
        irqres = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
        if (!mmres || !irqres)
                return -ENODEV;

        if (np) {
                port = of_alias_get_id(np, "serial");
                if (port >= VT8500_MAX_PORTS)
                        port = -1;
        } else {
                port = -1;
        }

        if (port < 0) {
                /* calculate the port id */
                port = find_first_zero_bit(vt8500_ports_in_use,
                                           VT8500_MAX_PORTS);
        }

        if (port >= VT8500_MAX_PORTS)
                return -ENODEV;

        /* reserve the port id */
        if (test_and_set_bit(port, vt8500_ports_in_use)) {
                /* port already in use - shouldn't really happen */
                return -EBUSY;
        }

        vt8500_port = devm_kzalloc(&pdev->dev, sizeof(struct vt8500_port),
                                   GFP_KERNEL);
        if (!vt8500_port)
                return -ENOMEM;

        vt8500_port->uart.membase = devm_ioremap_resource(&pdev->dev, mmres);
        if (IS_ERR(vt8500_port->uart.membase))
                return PTR_ERR(vt8500_port->uart.membase);

        vt8500_port->clk = of_clk_get(pdev->dev.of_node, 0);
        if (IS_ERR(vt8500_port->clk)) {
                dev_err(&pdev->dev, "failed to get clock\n");
                return  -EINVAL;
        }

        ret = clk_prepare_enable(vt8500_port->clk);
        if (ret) {
                dev_err(&pdev->dev, "failed to enable clock\n");
                return ret;
        }

        vt8500_port->vt8500_uart_flags = *flags;
        vt8500_port->clk_predivisor = DIV_ROUND_CLOSEST(
                                        clk_get_rate(vt8500_port->clk),
                                        VT8500_RECOMMENDED_CLK
                                      );
        vt8500_port->uart.type = PORT_VT8500;
        vt8500_port->uart.iotype = UPIO_MEM;
        vt8500_port->uart.mapbase = mmres->start;
        vt8500_port->uart.irq = irqres->start;
        vt8500_port->uart.fifosize = 16;
        vt8500_port->uart.ops = &vt8500_uart_pops;
        vt8500_port->uart.line = port;
        vt8500_port->uart.dev = &pdev->dev;
        vt8500_port->uart.flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF;

        /* Serial core uses the magic "16" everywhere - adjust for it */
        vt8500_port->uart.uartclk = 16 * clk_get_rate(vt8500_port->clk) /
                                        vt8500_port->clk_predivisor /
                                        VT8500_OVERSAMPLING_DIVISOR;

        snprintf(vt8500_port->name, sizeof(vt8500_port->name),
                 "VT8500 UART%d", pdev->id);

        vt8500_uart_ports[port] = vt8500_port;

        uart_add_one_port(&vt8500_uart_driver, &vt8500_port->uart);

        platform_set_drvdata(pdev, vt8500_port);

        return 0;
}

static struct platform_driver vt8500_platform_driver = {
        .probe  = vt8500_serial_probe,
        .driver = {
                .name = "vt8500_serial",
                .of_match_table = wmt_dt_ids,
                .suppress_bind_attrs = true,
        },
};

static int __init vt8500_serial_init(void)
{
        int ret;

        ret = uart_register_driver(&vt8500_uart_driver);
        if (unlikely(ret))
                return ret;

        ret = platform_driver_register(&vt8500_platform_driver);

        if (unlikely(ret))
                uart_unregister_driver(&vt8500_uart_driver);

        return ret;
}
device_initcall(vt8500_serial_init);