1/***************************************************************************** 2 * * 3 * Copyright (c) David L. Mills 1993 * 4 * * 5 * Permission to use, copy, modify, and distribute this software and its * 6 * documentation for any purpose and without fee is hereby granted, provided * 7 * that the above copyright notice appears in all copies and that both the * 8 * copyright notice and this permission notice appear in supporting * 9 * documentation, and that the name University of Delaware not be used in * 10 * advertising or publicity pertaining to distribution of the software * 11 * without specific, written prior permission. The University of Delaware * 12 * makes no representations about the suitability this software for any * 13 * purpose. It is provided "as is" without express or implied warranty. * 14 * * 15 *****************************************************************************/ 16 17/* 18 * Modification history timex.h 19 * 20 * 29 Dec 97 Russell King 21 * Moved CLOCK_TICK_RATE, CLOCK_TICK_FACTOR and FINETUNE to asm/timex.h 22 * for ARM machines 23 * 24 * 9 Jan 97 Adrian Sun 25 * Shifted LATCH define to allow access to alpha machines. 26 * 27 * 26 Sep 94 David L. Mills 28 * Added defines for hybrid phase/frequency-lock loop. 29 * 30 * 19 Mar 94 David L. Mills 31 * Moved defines from kernel routines to header file and added new 32 * defines for PPS phase-lock loop. 33 * 34 * 20 Feb 94 David L. Mills 35 * Revised status codes and structures for external clock and PPS 36 * signal discipline. 37 * 38 * 28 Nov 93 David L. Mills 39 * Adjusted parameters to improve stability and increase poll 40 * interval. 41 * 42 * 17 Sep 93 David L. Mills 43 * Created file $NTP/include/sys/timex.h 44 * 07 Oct 93 Torsten Duwe 45 * Derived linux/timex.h 46 * 1995-08-13 Torsten Duwe 47 * kernel PLL updated to 1994-12-13 specs (rfc-1589) 48 * 1997-08-30 Ulrich Windl 49 * Added new constant NTP_PHASE_LIMIT 50 * 2004-08-12 Christoph Lameter 51 * Reworked time interpolation logic 52 */ 53#ifndef _UAPI_LINUX_TIMEX_H 54#define _UAPI_LINUX_TIMEX_H 55 56#include <linux/time.h> 57 58#define NTP_API 4 /* NTP API version */ 59 60/* 61 * syscall interface - used (mainly by NTP daemon) 62 * to discipline kernel clock oscillator 63 */ 64struct timex { 65 unsigned int modes; /* mode selector */ 66 __kernel_long_t offset; /* time offset (usec) */ 67 __kernel_long_t freq; /* frequency offset (scaled ppm) */ 68 __kernel_long_t maxerror;/* maximum error (usec) */ 69 __kernel_long_t esterror;/* estimated error (usec) */ 70 int status; /* clock command/status */ 71 __kernel_long_t constant;/* pll time constant */ 72 __kernel_long_t precision;/* clock precision (usec) (read only) */ 73 __kernel_long_t tolerance;/* clock frequency tolerance (ppm) 74 * (read only) 75 */ 76 struct timeval time; /* (read only, except for ADJ_SETOFFSET) */ 77 __kernel_long_t tick; /* (modified) usecs between clock ticks */ 78 79 __kernel_long_t ppsfreq;/* pps frequency (scaled ppm) (ro) */ 80 __kernel_long_t jitter; /* pps jitter (us) (ro) */ 81 int shift; /* interval duration (s) (shift) (ro) */ 82 __kernel_long_t stabil; /* pps stability (scaled ppm) (ro) */ 83 __kernel_long_t jitcnt; /* jitter limit exceeded (ro) */ 84 __kernel_long_t calcnt; /* calibration intervals (ro) */ 85 __kernel_long_t errcnt; /* calibration errors (ro) */ 86 __kernel_long_t stbcnt; /* stability limit exceeded (ro) */ 87 88 int tai; /* TAI offset (ro) */ 89 90 int :32; int :32; int :32; int :32; 91 int :32; int :32; int :32; int :32; 92 int :32; int :32; int :32; 93}; 94 95/* 96 * Mode codes (timex.mode) 97 */ 98#define ADJ_OFFSET 0x0001 /* time offset */ 99#define ADJ_FREQUENCY 0x0002 /* frequency offset */ 100#define ADJ_MAXERROR 0x0004 /* maximum time error */ 101#define ADJ_ESTERROR 0x0008 /* estimated time error */ 102#define ADJ_STATUS 0x0010 /* clock status */ 103#define ADJ_TIMECONST 0x0020 /* pll time constant */ 104#define ADJ_TAI 0x0080 /* set TAI offset */ 105#define ADJ_SETOFFSET 0x0100 /* add 'time' to current time */ 106#define ADJ_MICRO 0x1000 /* select microsecond resolution */ 107#define ADJ_NANO 0x2000 /* select nanosecond resolution */ 108#define ADJ_TICK 0x4000 /* tick value */ 109 110#ifndef __KERNEL__ 111#define ADJ_OFFSET_SINGLESHOT 0x8001 /* old-fashioned adjtime */ 112#define ADJ_OFFSET_SS_READ 0xa001 /* read-only adjtime */ 113#endif 114 115/* NTP userland likes the MOD_ prefix better */ 116#define MOD_OFFSET ADJ_OFFSET 117#define MOD_FREQUENCY ADJ_FREQUENCY 118#define MOD_MAXERROR ADJ_MAXERROR 119#define MOD_ESTERROR ADJ_ESTERROR 120#define MOD_STATUS ADJ_STATUS 121#define MOD_TIMECONST ADJ_TIMECONST 122#define MOD_TAI ADJ_TAI 123#define MOD_MICRO ADJ_MICRO 124#define MOD_NANO ADJ_NANO 125 126 127/* 128 * Status codes (timex.status) 129 */ 130#define STA_PLL 0x0001 /* enable PLL updates (rw) */ 131#define STA_PPSFREQ 0x0002 /* enable PPS freq discipline (rw) */ 132#define STA_PPSTIME 0x0004 /* enable PPS time discipline (rw) */ 133#define STA_FLL 0x0008 /* select frequency-lock mode (rw) */ 134 135#define STA_INS 0x0010 /* insert leap (rw) */ 136#define STA_DEL 0x0020 /* delete leap (rw) */ 137#define STA_UNSYNC 0x0040 /* clock unsynchronized (rw) */ 138#define STA_FREQHOLD 0x0080 /* hold frequency (rw) */ 139 140#define STA_PPSSIGNAL 0x0100 /* PPS signal present (ro) */ 141#define STA_PPSJITTER 0x0200 /* PPS signal jitter exceeded (ro) */ 142#define STA_PPSWANDER 0x0400 /* PPS signal wander exceeded (ro) */ 143#define STA_PPSERROR 0x0800 /* PPS signal calibration error (ro) */ 144 145#define STA_CLOCKERR 0x1000 /* clock hardware fault (ro) */ 146#define STA_NANO 0x2000 /* resolution (0 = us, 1 = ns) (ro) */ 147#define STA_MODE 0x4000 /* mode (0 = PLL, 1 = FLL) (ro) */ 148#define STA_CLK 0x8000 /* clock source (0 = A, 1 = B) (ro) */ 149 150/* read-only bits */ 151#define STA_RONLY (STA_PPSSIGNAL | STA_PPSJITTER | STA_PPSWANDER | \ 152 STA_PPSERROR | STA_CLOCKERR | STA_NANO | STA_MODE | STA_CLK) 153 154/* 155 * Clock states (time_state) 156 */ 157#define TIME_OK 0 /* clock synchronized, no leap second */ 158#define TIME_INS 1 /* insert leap second */ 159#define TIME_DEL 2 /* delete leap second */ 160#define TIME_OOP 3 /* leap second in progress */ 161#define TIME_WAIT 4 /* leap second has occurred */ 162#define TIME_ERROR 5 /* clock not synchronized */ 163#define TIME_BAD TIME_ERROR /* bw compat */ 164 165 166#endif /* _UAPI_LINUX_TIMEX_H */ 167