linux/drivers/mmc/host/meson-gx-mmc.c
<<
>>
Prefs
   1/*
   2 * Amlogic SD/eMMC driver for the GX/S905 family SoCs
   3 *
   4 * Copyright (c) 2016 BayLibre, SAS.
   5 * Author: Kevin Hilman <khilman@baylibre.com>
   6 *
   7 * This program is free software; you can redistribute it and/or modify
   8 * it under the terms of version 2 of the GNU General Public License as
   9 * published by the Free Software Foundation.
  10 *
  11 * This program is distributed in the hope that it will be useful, but
  12 * WITHOUT ANY WARRANTY; without even the implied warranty of
  13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  14 * General Public License for more details.
  15 *
  16 * You should have received a copy of the GNU General Public License
  17 * along with this program; if not, see <http://www.gnu.org/licenses/>.
  18 * The full GNU General Public License is included in this distribution
  19 * in the file called COPYING.
  20 */
  21#include <linux/kernel.h>
  22#include <linux/module.h>
  23#include <linux/init.h>
  24#include <linux/device.h>
  25#include <linux/of_device.h>
  26#include <linux/platform_device.h>
  27#include <linux/ioport.h>
  28#include <linux/spinlock.h>
  29#include <linux/dma-mapping.h>
  30#include <linux/mmc/host.h>
  31#include <linux/mmc/mmc.h>
  32#include <linux/mmc/sdio.h>
  33#include <linux/mmc/slot-gpio.h>
  34#include <linux/io.h>
  35#include <linux/clk.h>
  36#include <linux/clk-provider.h>
  37#include <linux/regulator/consumer.h>
  38#include <linux/reset.h>
  39#include <linux/interrupt.h>
  40#include <linux/bitfield.h>
  41#include <linux/pinctrl/consumer.h>
  42
  43#define DRIVER_NAME "meson-gx-mmc"
  44
  45#define SD_EMMC_CLOCK 0x0
  46#define   CLK_DIV_MASK GENMASK(5, 0)
  47#define   CLK_SRC_MASK GENMASK(7, 6)
  48#define   CLK_CORE_PHASE_MASK GENMASK(9, 8)
  49#define   CLK_TX_PHASE_MASK GENMASK(11, 10)
  50#define   CLK_RX_PHASE_MASK GENMASK(13, 12)
  51#define   CLK_V2_TX_DELAY_MASK GENMASK(19, 16)
  52#define   CLK_V2_RX_DELAY_MASK GENMASK(23, 20)
  53#define   CLK_V2_ALWAYS_ON BIT(24)
  54
  55#define   CLK_V3_TX_DELAY_MASK GENMASK(21, 16)
  56#define   CLK_V3_RX_DELAY_MASK GENMASK(27, 22)
  57#define   CLK_V3_ALWAYS_ON BIT(28)
  58
  59#define   CLK_DELAY_STEP_PS 200
  60#define   CLK_PHASE_STEP 30
  61#define   CLK_PHASE_POINT_NUM (360 / CLK_PHASE_STEP)
  62
  63#define   CLK_TX_DELAY_MASK(h)          (h->data->tx_delay_mask)
  64#define   CLK_RX_DELAY_MASK(h)          (h->data->rx_delay_mask)
  65#define   CLK_ALWAYS_ON(h)              (h->data->always_on)
  66
  67#define SD_EMMC_DELAY 0x4
  68#define SD_EMMC_ADJUST 0x8
  69
  70#define SD_EMMC_DELAY1 0x4
  71#define SD_EMMC_DELAY2 0x8
  72#define SD_EMMC_V3_ADJUST 0xc
  73
  74#define SD_EMMC_CALOUT 0x10
  75#define SD_EMMC_START 0x40
  76#define   START_DESC_INIT BIT(0)
  77#define   START_DESC_BUSY BIT(1)
  78#define   START_DESC_ADDR_MASK GENMASK(31, 2)
  79
  80#define SD_EMMC_CFG 0x44
  81#define   CFG_BUS_WIDTH_MASK GENMASK(1, 0)
  82#define   CFG_BUS_WIDTH_1 0x0
  83#define   CFG_BUS_WIDTH_4 0x1
  84#define   CFG_BUS_WIDTH_8 0x2
  85#define   CFG_DDR BIT(2)
  86#define   CFG_BLK_LEN_MASK GENMASK(7, 4)
  87#define   CFG_RESP_TIMEOUT_MASK GENMASK(11, 8)
  88#define   CFG_RC_CC_MASK GENMASK(15, 12)
  89#define   CFG_STOP_CLOCK BIT(22)
  90#define   CFG_CLK_ALWAYS_ON BIT(18)
  91#define   CFG_CHK_DS BIT(20)
  92#define   CFG_AUTO_CLK BIT(23)
  93
  94#define SD_EMMC_STATUS 0x48
  95#define   STATUS_BUSY BIT(31)
  96#define   STATUS_DATI GENMASK(23, 16)
  97
  98#define SD_EMMC_IRQ_EN 0x4c
  99#define   IRQ_RXD_ERR_MASK GENMASK(7, 0)
 100#define   IRQ_TXD_ERR BIT(8)
 101#define   IRQ_DESC_ERR BIT(9)
 102#define   IRQ_RESP_ERR BIT(10)
 103#define   IRQ_CRC_ERR \
 104        (IRQ_RXD_ERR_MASK | IRQ_TXD_ERR | IRQ_DESC_ERR | IRQ_RESP_ERR)
 105#define   IRQ_RESP_TIMEOUT BIT(11)
 106#define   IRQ_DESC_TIMEOUT BIT(12)
 107#define   IRQ_TIMEOUTS \
 108        (IRQ_RESP_TIMEOUT | IRQ_DESC_TIMEOUT)
 109#define   IRQ_END_OF_CHAIN BIT(13)
 110#define   IRQ_RESP_STATUS BIT(14)
 111#define   IRQ_SDIO BIT(15)
 112#define   IRQ_EN_MASK \
 113        (IRQ_CRC_ERR | IRQ_TIMEOUTS | IRQ_END_OF_CHAIN | IRQ_RESP_STATUS |\
 114         IRQ_SDIO)
 115
 116#define SD_EMMC_CMD_CFG 0x50
 117#define SD_EMMC_CMD_ARG 0x54
 118#define SD_EMMC_CMD_DAT 0x58
 119#define SD_EMMC_CMD_RSP 0x5c
 120#define SD_EMMC_CMD_RSP1 0x60
 121#define SD_EMMC_CMD_RSP2 0x64
 122#define SD_EMMC_CMD_RSP3 0x68
 123
 124#define SD_EMMC_RXD 0x94
 125#define SD_EMMC_TXD 0x94
 126#define SD_EMMC_LAST_REG SD_EMMC_TXD
 127
 128#define SD_EMMC_CFG_BLK_SIZE 512 /* internal buffer max: 512 bytes */
 129#define SD_EMMC_CFG_RESP_TIMEOUT 256 /* in clock cycles */
 130#define SD_EMMC_CMD_TIMEOUT 1024 /* in ms */
 131#define SD_EMMC_CMD_TIMEOUT_DATA 4096 /* in ms */
 132#define SD_EMMC_CFG_CMD_GAP 16 /* in clock cycles */
 133#define SD_EMMC_DESC_BUF_LEN PAGE_SIZE
 134
 135#define SD_EMMC_PRE_REQ_DONE BIT(0)
 136#define SD_EMMC_DESC_CHAIN_MODE BIT(1)
 137
 138#define MUX_CLK_NUM_PARENTS 2
 139
 140struct meson_mmc_data {
 141        unsigned int tx_delay_mask;
 142        unsigned int rx_delay_mask;
 143        unsigned int always_on;
 144};
 145
 146struct sd_emmc_desc {
 147        u32 cmd_cfg;
 148        u32 cmd_arg;
 149        u32 cmd_data;
 150        u32 cmd_resp;
 151};
 152
 153struct meson_host {
 154        struct  device          *dev;
 155        struct  meson_mmc_data *data;
 156        struct  mmc_host        *mmc;
 157        struct  mmc_command     *cmd;
 158
 159        spinlock_t lock;
 160        void __iomem *regs;
 161        struct clk *core_clk;
 162        struct clk *mmc_clk;
 163        struct clk *rx_clk;
 164        struct clk *tx_clk;
 165        unsigned long req_rate;
 166
 167        struct pinctrl *pinctrl;
 168        struct pinctrl_state *pins_default;
 169        struct pinctrl_state *pins_clk_gate;
 170
 171        unsigned int bounce_buf_size;
 172        void *bounce_buf;
 173        dma_addr_t bounce_dma_addr;
 174        struct sd_emmc_desc *descs;
 175        dma_addr_t descs_dma_addr;
 176
 177        bool vqmmc_enabled;
 178};
 179
 180#define CMD_CFG_LENGTH_MASK GENMASK(8, 0)
 181#define CMD_CFG_BLOCK_MODE BIT(9)
 182#define CMD_CFG_R1B BIT(10)
 183#define CMD_CFG_END_OF_CHAIN BIT(11)
 184#define CMD_CFG_TIMEOUT_MASK GENMASK(15, 12)
 185#define CMD_CFG_NO_RESP BIT(16)
 186#define CMD_CFG_NO_CMD BIT(17)
 187#define CMD_CFG_DATA_IO BIT(18)
 188#define CMD_CFG_DATA_WR BIT(19)
 189#define CMD_CFG_RESP_NOCRC BIT(20)
 190#define CMD_CFG_RESP_128 BIT(21)
 191#define CMD_CFG_RESP_NUM BIT(22)
 192#define CMD_CFG_DATA_NUM BIT(23)
 193#define CMD_CFG_CMD_INDEX_MASK GENMASK(29, 24)
 194#define CMD_CFG_ERROR BIT(30)
 195#define CMD_CFG_OWNER BIT(31)
 196
 197#define CMD_DATA_MASK GENMASK(31, 2)
 198#define CMD_DATA_BIG_ENDIAN BIT(1)
 199#define CMD_DATA_SRAM BIT(0)
 200#define CMD_RESP_MASK GENMASK(31, 1)
 201#define CMD_RESP_SRAM BIT(0)
 202
 203struct meson_mmc_phase {
 204        struct clk_hw hw;
 205        void __iomem *reg;
 206        unsigned long phase_mask;
 207        unsigned long delay_mask;
 208        unsigned int delay_step_ps;
 209};
 210
 211#define to_meson_mmc_phase(_hw) container_of(_hw, struct meson_mmc_phase, hw)
 212
 213static int meson_mmc_clk_get_phase(struct clk_hw *hw)
 214{
 215        struct meson_mmc_phase *mmc = to_meson_mmc_phase(hw);
 216        unsigned int phase_num = 1 <<  hweight_long(mmc->phase_mask);
 217        unsigned long period_ps, p, d;
 218                int degrees;
 219        u32 val;
 220
 221        val = readl(mmc->reg);
 222        p = (val & mmc->phase_mask) >> __ffs(mmc->phase_mask);
 223        degrees = p * 360 / phase_num;
 224
 225        if (mmc->delay_mask) {
 226                period_ps = DIV_ROUND_UP((unsigned long)NSEC_PER_SEC * 1000,
 227                                         clk_get_rate(hw->clk));
 228                d = (val & mmc->delay_mask) >> __ffs(mmc->delay_mask);
 229                degrees += d * mmc->delay_step_ps * 360 / period_ps;
 230                degrees %= 360;
 231        }
 232
 233        return degrees;
 234}
 235
 236static void meson_mmc_apply_phase_delay(struct meson_mmc_phase *mmc,
 237                                        unsigned int phase,
 238                                        unsigned int delay)
 239{
 240        u32 val;
 241
 242        val = readl(mmc->reg);
 243        val &= ~mmc->phase_mask;
 244        val |= phase << __ffs(mmc->phase_mask);
 245
 246        if (mmc->delay_mask) {
 247                val &= ~mmc->delay_mask;
 248                val |= delay << __ffs(mmc->delay_mask);
 249        }
 250
 251        writel(val, mmc->reg);
 252}
 253
 254static int meson_mmc_clk_set_phase(struct clk_hw *hw, int degrees)
 255{
 256        struct meson_mmc_phase *mmc = to_meson_mmc_phase(hw);
 257        unsigned int phase_num = 1 <<  hweight_long(mmc->phase_mask);
 258        unsigned long period_ps, d = 0, r;
 259        uint64_t p;
 260
 261        p = degrees % 360;
 262
 263        if (!mmc->delay_mask) {
 264                p = DIV_ROUND_CLOSEST_ULL(p, 360 / phase_num);
 265        } else {
 266                period_ps = DIV_ROUND_UP((unsigned long)NSEC_PER_SEC * 1000,
 267                                         clk_get_rate(hw->clk));
 268
 269                /* First compute the phase index (p), the remainder (r) is the
 270                 * part we'll try to acheive using the delays (d).
 271                 */
 272                r = do_div(p, 360 / phase_num);
 273                d = DIV_ROUND_CLOSEST(r * period_ps,
 274                                      360 * mmc->delay_step_ps);
 275                d = min(d, mmc->delay_mask >> __ffs(mmc->delay_mask));
 276        }
 277
 278        meson_mmc_apply_phase_delay(mmc, p, d);
 279        return 0;
 280}
 281
 282static const struct clk_ops meson_mmc_clk_phase_ops = {
 283        .get_phase = meson_mmc_clk_get_phase,
 284        .set_phase = meson_mmc_clk_set_phase,
 285};
 286
 287static unsigned int meson_mmc_get_timeout_msecs(struct mmc_data *data)
 288{
 289        unsigned int timeout = data->timeout_ns / NSEC_PER_MSEC;
 290
 291        if (!timeout)
 292                return SD_EMMC_CMD_TIMEOUT_DATA;
 293
 294        timeout = roundup_pow_of_two(timeout);
 295
 296        return min(timeout, 32768U); /* max. 2^15 ms */
 297}
 298
 299static struct mmc_command *meson_mmc_get_next_command(struct mmc_command *cmd)
 300{
 301        if (cmd->opcode == MMC_SET_BLOCK_COUNT && !cmd->error)
 302                return cmd->mrq->cmd;
 303        else if (mmc_op_multi(cmd->opcode) &&
 304                 (!cmd->mrq->sbc || cmd->error || cmd->data->error))
 305                return cmd->mrq->stop;
 306        else
 307                return NULL;
 308}
 309
 310static void meson_mmc_get_transfer_mode(struct mmc_host *mmc,
 311                                        struct mmc_request *mrq)
 312{
 313        struct mmc_data *data = mrq->data;
 314        struct scatterlist *sg;
 315        int i;
 316        bool use_desc_chain_mode = true;
 317
 318        /*
 319         * Broken SDIO with AP6255-based WiFi on Khadas VIM Pro has been
 320         * reported. For some strange reason this occurs in descriptor
 321         * chain mode only. So let's fall back to bounce buffer mode
 322         * for command SD_IO_RW_EXTENDED.
 323         */
 324        if (mrq->cmd->opcode == SD_IO_RW_EXTENDED)
 325                return;
 326
 327        for_each_sg(data->sg, sg, data->sg_len, i)
 328                /* check for 8 byte alignment */
 329                if (sg->offset & 7) {
 330                        WARN_ONCE(1, "unaligned scatterlist buffer\n");
 331                        use_desc_chain_mode = false;
 332                        break;
 333                }
 334
 335        if (use_desc_chain_mode)
 336                data->host_cookie |= SD_EMMC_DESC_CHAIN_MODE;
 337}
 338
 339static inline bool meson_mmc_desc_chain_mode(const struct mmc_data *data)
 340{
 341        return data->host_cookie & SD_EMMC_DESC_CHAIN_MODE;
 342}
 343
 344static inline bool meson_mmc_bounce_buf_read(const struct mmc_data *data)
 345{
 346        return data && data->flags & MMC_DATA_READ &&
 347               !meson_mmc_desc_chain_mode(data);
 348}
 349
 350static void meson_mmc_pre_req(struct mmc_host *mmc, struct mmc_request *mrq)
 351{
 352        struct mmc_data *data = mrq->data;
 353
 354        if (!data)
 355                return;
 356
 357        meson_mmc_get_transfer_mode(mmc, mrq);
 358        data->host_cookie |= SD_EMMC_PRE_REQ_DONE;
 359
 360        if (!meson_mmc_desc_chain_mode(data))
 361                return;
 362
 363        data->sg_count = dma_map_sg(mmc_dev(mmc), data->sg, data->sg_len,
 364                                   mmc_get_dma_dir(data));
 365        if (!data->sg_count)
 366                dev_err(mmc_dev(mmc), "dma_map_sg failed");
 367}
 368
 369static void meson_mmc_post_req(struct mmc_host *mmc, struct mmc_request *mrq,
 370                               int err)
 371{
 372        struct mmc_data *data = mrq->data;
 373
 374        if (data && meson_mmc_desc_chain_mode(data) && data->sg_count)
 375                dma_unmap_sg(mmc_dev(mmc), data->sg, data->sg_len,
 376                             mmc_get_dma_dir(data));
 377}
 378
 379static bool meson_mmc_timing_is_ddr(struct mmc_ios *ios)
 380{
 381        if (ios->timing == MMC_TIMING_MMC_DDR52 ||
 382            ios->timing == MMC_TIMING_UHS_DDR50 ||
 383            ios->timing == MMC_TIMING_MMC_HS400)
 384                return true;
 385
 386        return false;
 387}
 388
 389/*
 390 * Gating the clock on this controller is tricky.  It seems the mmc clock
 391 * is also used by the controller.  It may crash during some operation if the
 392 * clock is stopped.  The safest thing to do, whenever possible, is to keep
 393 * clock running at stop it at the pad using the pinmux.
 394 */
 395static void meson_mmc_clk_gate(struct meson_host *host)
 396{
 397        u32 cfg;
 398
 399        if (host->pins_clk_gate) {
 400                pinctrl_select_state(host->pinctrl, host->pins_clk_gate);
 401        } else {
 402                /*
 403                 * If the pinmux is not provided - default to the classic and
 404                 * unsafe method
 405                 */
 406                cfg = readl(host->regs + SD_EMMC_CFG);
 407                cfg |= CFG_STOP_CLOCK;
 408                writel(cfg, host->regs + SD_EMMC_CFG);
 409        }
 410}
 411
 412static void meson_mmc_clk_ungate(struct meson_host *host)
 413{
 414        u32 cfg;
 415
 416        if (host->pins_clk_gate)
 417                pinctrl_select_state(host->pinctrl, host->pins_default);
 418
 419        /* Make sure the clock is not stopped in the controller */
 420        cfg = readl(host->regs + SD_EMMC_CFG);
 421        cfg &= ~CFG_STOP_CLOCK;
 422        writel(cfg, host->regs + SD_EMMC_CFG);
 423}
 424
 425static int meson_mmc_clk_set(struct meson_host *host, struct mmc_ios *ios)
 426{
 427        struct mmc_host *mmc = host->mmc;
 428        unsigned long rate = ios->clock;
 429        int ret;
 430        u32 cfg;
 431
 432        /* DDR modes require higher module clock */
 433        if (meson_mmc_timing_is_ddr(ios))
 434                rate <<= 1;
 435
 436        /* Same request - bail-out */
 437        if (host->req_rate == rate)
 438                return 0;
 439
 440        /* stop clock */
 441        meson_mmc_clk_gate(host);
 442        host->req_rate = 0;
 443
 444        if (!rate) {
 445                mmc->actual_clock = 0;
 446                /* return with clock being stopped */
 447                return 0;
 448        }
 449
 450        /* Stop the clock during rate change to avoid glitches */
 451        cfg = readl(host->regs + SD_EMMC_CFG);
 452        cfg |= CFG_STOP_CLOCK;
 453        writel(cfg, host->regs + SD_EMMC_CFG);
 454
 455        ret = clk_set_rate(host->mmc_clk, rate);
 456        if (ret) {
 457                dev_err(host->dev, "Unable to set cfg_div_clk to %lu. ret=%d\n",
 458                        rate, ret);
 459                return ret;
 460        }
 461
 462        host->req_rate = rate;
 463        mmc->actual_clock = clk_get_rate(host->mmc_clk);
 464
 465        /* We should report the real output frequency of the controller */
 466        if (meson_mmc_timing_is_ddr(ios))
 467                mmc->actual_clock >>= 1;
 468
 469        dev_dbg(host->dev, "clk rate: %u Hz\n", mmc->actual_clock);
 470        if (ios->clock != mmc->actual_clock)
 471                dev_dbg(host->dev, "requested rate was %u\n", ios->clock);
 472
 473        /* (re)start clock */
 474        meson_mmc_clk_ungate(host);
 475
 476        return 0;
 477}
 478
 479/*
 480 * The SD/eMMC IP block has an internal mux and divider used for
 481 * generating the MMC clock.  Use the clock framework to create and
 482 * manage these clocks.
 483 */
 484static int meson_mmc_clk_init(struct meson_host *host)
 485{
 486        struct clk_init_data init;
 487        struct clk_mux *mux;
 488        struct clk_divider *div;
 489        struct meson_mmc_phase *core, *tx, *rx;
 490        struct clk *clk;
 491        char clk_name[32];
 492        int i, ret = 0;
 493        const char *mux_parent_names[MUX_CLK_NUM_PARENTS];
 494        const char *clk_parent[1];
 495        u32 clk_reg;
 496
 497        /* init SD_EMMC_CLOCK to sane defaults w/min clock rate */
 498        clk_reg = 0;
 499        clk_reg |= CLK_ALWAYS_ON(host);
 500        clk_reg |= CLK_DIV_MASK;
 501        writel(clk_reg, host->regs + SD_EMMC_CLOCK);
 502
 503        /* get the mux parents */
 504        for (i = 0; i < MUX_CLK_NUM_PARENTS; i++) {
 505                struct clk *clk;
 506                char name[16];
 507
 508                snprintf(name, sizeof(name), "clkin%d", i);
 509                clk = devm_clk_get(host->dev, name);
 510                if (IS_ERR(clk)) {
 511                        if (clk != ERR_PTR(-EPROBE_DEFER))
 512                                dev_err(host->dev, "Missing clock %s\n", name);
 513                        return PTR_ERR(clk);
 514                }
 515
 516                mux_parent_names[i] = __clk_get_name(clk);
 517        }
 518
 519        /* create the mux */
 520        mux = devm_kzalloc(host->dev, sizeof(*mux), GFP_KERNEL);
 521        if (!mux)
 522                return -ENOMEM;
 523
 524        snprintf(clk_name, sizeof(clk_name), "%s#mux", dev_name(host->dev));
 525        init.name = clk_name;
 526        init.ops = &clk_mux_ops;
 527        init.flags = 0;
 528        init.parent_names = mux_parent_names;
 529        init.num_parents = MUX_CLK_NUM_PARENTS;
 530
 531        mux->reg = host->regs + SD_EMMC_CLOCK;
 532        mux->shift = __ffs(CLK_SRC_MASK);
 533        mux->mask = CLK_SRC_MASK >> mux->shift;
 534        mux->hw.init = &init;
 535
 536        clk = devm_clk_register(host->dev, &mux->hw);
 537        if (WARN_ON(IS_ERR(clk)))
 538                return PTR_ERR(clk);
 539
 540        /* create the divider */
 541        div = devm_kzalloc(host->dev, sizeof(*div), GFP_KERNEL);
 542        if (!div)
 543                return -ENOMEM;
 544
 545        snprintf(clk_name, sizeof(clk_name), "%s#div", dev_name(host->dev));
 546        init.name = clk_name;
 547        init.ops = &clk_divider_ops;
 548        init.flags = CLK_SET_RATE_PARENT;
 549        clk_parent[0] = __clk_get_name(clk);
 550        init.parent_names = clk_parent;
 551        init.num_parents = 1;
 552
 553        div->reg = host->regs + SD_EMMC_CLOCK;
 554        div->shift = __ffs(CLK_DIV_MASK);
 555        div->width = __builtin_popcountl(CLK_DIV_MASK);
 556        div->hw.init = &init;
 557        div->flags = CLK_DIVIDER_ONE_BASED;
 558
 559        clk = devm_clk_register(host->dev, &div->hw);
 560        if (WARN_ON(IS_ERR(clk)))
 561                return PTR_ERR(clk);
 562
 563        /* create the mmc core clock */
 564        core = devm_kzalloc(host->dev, sizeof(*core), GFP_KERNEL);
 565        if (!core)
 566                return -ENOMEM;
 567
 568        snprintf(clk_name, sizeof(clk_name), "%s#core", dev_name(host->dev));
 569        init.name = clk_name;
 570        init.ops = &meson_mmc_clk_phase_ops;
 571        init.flags = CLK_SET_RATE_PARENT;
 572        clk_parent[0] = __clk_get_name(clk);
 573        init.parent_names = clk_parent;
 574        init.num_parents = 1;
 575
 576        core->reg = host->regs + SD_EMMC_CLOCK;
 577        core->phase_mask = CLK_CORE_PHASE_MASK;
 578        core->hw.init = &init;
 579
 580        host->mmc_clk = devm_clk_register(host->dev, &core->hw);
 581        if (WARN_ON(PTR_ERR_OR_ZERO(host->mmc_clk)))
 582                return PTR_ERR(host->mmc_clk);
 583
 584        /* create the mmc tx clock */
 585        tx = devm_kzalloc(host->dev, sizeof(*tx), GFP_KERNEL);
 586        if (!tx)
 587                return -ENOMEM;
 588
 589        snprintf(clk_name, sizeof(clk_name), "%s#tx", dev_name(host->dev));
 590        init.name = clk_name;
 591        init.ops = &meson_mmc_clk_phase_ops;
 592        init.flags = 0;
 593        clk_parent[0] = __clk_get_name(host->mmc_clk);
 594        init.parent_names = clk_parent;
 595        init.num_parents = 1;
 596
 597        tx->reg = host->regs + SD_EMMC_CLOCK;
 598        tx->phase_mask = CLK_TX_PHASE_MASK;
 599        tx->delay_mask = CLK_TX_DELAY_MASK(host);
 600        tx->delay_step_ps = CLK_DELAY_STEP_PS;
 601        tx->hw.init = &init;
 602
 603        host->tx_clk = devm_clk_register(host->dev, &tx->hw);
 604        if (WARN_ON(PTR_ERR_OR_ZERO(host->tx_clk)))
 605                return PTR_ERR(host->tx_clk);
 606
 607        /* create the mmc rx clock */
 608        rx = devm_kzalloc(host->dev, sizeof(*rx), GFP_KERNEL);
 609        if (!rx)
 610                return -ENOMEM;
 611
 612        snprintf(clk_name, sizeof(clk_name), "%s#rx", dev_name(host->dev));
 613        init.name = clk_name;
 614        init.ops = &meson_mmc_clk_phase_ops;
 615        init.flags = 0;
 616        clk_parent[0] = __clk_get_name(host->mmc_clk);
 617        init.parent_names = clk_parent;
 618        init.num_parents = 1;
 619
 620        rx->reg = host->regs + SD_EMMC_CLOCK;
 621        rx->phase_mask = CLK_RX_PHASE_MASK;
 622        rx->delay_mask = CLK_RX_DELAY_MASK(host);
 623        rx->delay_step_ps = CLK_DELAY_STEP_PS;
 624        rx->hw.init = &init;
 625
 626        host->rx_clk = devm_clk_register(host->dev, &rx->hw);
 627        if (WARN_ON(PTR_ERR_OR_ZERO(host->rx_clk)))
 628                return PTR_ERR(host->rx_clk);
 629
 630        /* init SD_EMMC_CLOCK to sane defaults w/min clock rate */
 631        host->mmc->f_min = clk_round_rate(host->mmc_clk, 400000);
 632        ret = clk_set_rate(host->mmc_clk, host->mmc->f_min);
 633        if (ret)
 634                return ret;
 635
 636        /*
 637         * Set phases : These values are mostly the datasheet recommended ones
 638         * except for the Tx phase. Datasheet recommends 180 but some cards
 639         * fail at initialisation with it. 270 works just fine, it fixes these
 640         * initialisation issues and enable eMMC DDR52 mode.
 641         */
 642        clk_set_phase(host->mmc_clk, 180);
 643        clk_set_phase(host->tx_clk, 270);
 644        clk_set_phase(host->rx_clk, 0);
 645
 646        return clk_prepare_enable(host->mmc_clk);
 647}
 648
 649static void meson_mmc_shift_map(unsigned long *map, unsigned long shift)
 650{
 651        DECLARE_BITMAP(left, CLK_PHASE_POINT_NUM);
 652        DECLARE_BITMAP(right, CLK_PHASE_POINT_NUM);
 653
 654        /*
 655         * shift the bitmap right and reintroduce the dropped bits on the left
 656         * of the bitmap
 657         */
 658        bitmap_shift_right(right, map, shift, CLK_PHASE_POINT_NUM);
 659        bitmap_shift_left(left, map, CLK_PHASE_POINT_NUM - shift,
 660                          CLK_PHASE_POINT_NUM);
 661        bitmap_or(map, left, right, CLK_PHASE_POINT_NUM);
 662}
 663
 664static void meson_mmc_find_next_region(unsigned long *map,
 665                                       unsigned long *start,
 666                                       unsigned long *stop)
 667{
 668        *start = find_next_bit(map, CLK_PHASE_POINT_NUM, *start);
 669        *stop = find_next_zero_bit(map, CLK_PHASE_POINT_NUM, *start);
 670}
 671
 672static int meson_mmc_find_tuning_point(unsigned long *test)
 673{
 674        unsigned long shift, stop, offset = 0, start = 0, size = 0;
 675
 676        /* Get the all good/all bad situation out the way */
 677        if (bitmap_full(test, CLK_PHASE_POINT_NUM))
 678                return 0; /* All points are good so point 0 will do */
 679        else if (bitmap_empty(test, CLK_PHASE_POINT_NUM))
 680                return -EIO; /* No successful tuning point */
 681
 682        /*
 683         * Now we know there is a least one region find. Make sure it does
 684         * not wrap by the shifting the bitmap if necessary
 685         */
 686        shift = find_first_zero_bit(test, CLK_PHASE_POINT_NUM);
 687        if (shift != 0)
 688                meson_mmc_shift_map(test, shift);
 689
 690        while (start < CLK_PHASE_POINT_NUM) {
 691                meson_mmc_find_next_region(test, &start, &stop);
 692
 693                if ((stop - start) > size) {
 694                        offset = start;
 695                        size = stop - start;
 696                }
 697
 698                start = stop;
 699        }
 700
 701        /* Get the center point of the region */
 702        offset += (size / 2);
 703
 704        /* Shift the result back */
 705        offset = (offset + shift) % CLK_PHASE_POINT_NUM;
 706
 707        return offset;
 708}
 709
 710static int meson_mmc_clk_phase_tuning(struct mmc_host *mmc, u32 opcode,
 711                                      struct clk *clk)
 712{
 713        int point, ret;
 714        DECLARE_BITMAP(test, CLK_PHASE_POINT_NUM);
 715
 716        dev_dbg(mmc_dev(mmc), "%s phase/delay tunning...\n",
 717                __clk_get_name(clk));
 718        bitmap_zero(test, CLK_PHASE_POINT_NUM);
 719
 720        /* Explore tuning points */
 721        for (point = 0; point < CLK_PHASE_POINT_NUM; point++) {
 722                clk_set_phase(clk, point * CLK_PHASE_STEP);
 723                ret = mmc_send_tuning(mmc, opcode, NULL);
 724                if (!ret)
 725                        set_bit(point, test);
 726        }
 727
 728        /* Find the optimal tuning point and apply it */
 729        point = meson_mmc_find_tuning_point(test);
 730        if (point < 0)
 731                return point; /* tuning failed */
 732
 733        clk_set_phase(clk, point * CLK_PHASE_STEP);
 734        dev_dbg(mmc_dev(mmc), "success with phase: %d\n",
 735                clk_get_phase(clk));
 736        return 0;
 737}
 738
 739static int meson_mmc_execute_tuning(struct mmc_host *mmc, u32 opcode)
 740{
 741        struct meson_host *host = mmc_priv(mmc);
 742
 743        return meson_mmc_clk_phase_tuning(mmc, opcode, host->rx_clk);
 744}
 745
 746static void meson_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 747{
 748        struct meson_host *host = mmc_priv(mmc);
 749        u32 bus_width, val;
 750        int err;
 751
 752        /*
 753         * GPIO regulator, only controls switching between 1v8 and
 754         * 3v3, doesn't support MMC_POWER_OFF, MMC_POWER_ON.
 755         */
 756        switch (ios->power_mode) {
 757        case MMC_POWER_OFF:
 758                if (!IS_ERR(mmc->supply.vmmc))
 759                        mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0);
 760
 761                if (!IS_ERR(mmc->supply.vqmmc) && host->vqmmc_enabled) {
 762                        regulator_disable(mmc->supply.vqmmc);
 763                        host->vqmmc_enabled = false;
 764                }
 765
 766                break;
 767
 768        case MMC_POWER_UP:
 769                if (!IS_ERR(mmc->supply.vmmc))
 770                        mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, ios->vdd);
 771
 772                /* Reset rx phase */
 773                clk_set_phase(host->rx_clk, 0);
 774
 775                break;
 776
 777        case MMC_POWER_ON:
 778                if (!IS_ERR(mmc->supply.vqmmc) && !host->vqmmc_enabled) {
 779                        int ret = regulator_enable(mmc->supply.vqmmc);
 780
 781                        if (ret < 0)
 782                                dev_err(host->dev,
 783                                        "failed to enable vqmmc regulator\n");
 784                        else
 785                                host->vqmmc_enabled = true;
 786                }
 787
 788                break;
 789        }
 790
 791        /* Bus width */
 792        switch (ios->bus_width) {
 793        case MMC_BUS_WIDTH_1:
 794                bus_width = CFG_BUS_WIDTH_1;
 795                break;
 796        case MMC_BUS_WIDTH_4:
 797                bus_width = CFG_BUS_WIDTH_4;
 798                break;
 799        case MMC_BUS_WIDTH_8:
 800                bus_width = CFG_BUS_WIDTH_8;
 801                break;
 802        default:
 803                dev_err(host->dev, "Invalid ios->bus_width: %u.  Setting to 4.\n",
 804                        ios->bus_width);
 805                bus_width = CFG_BUS_WIDTH_4;
 806        }
 807
 808        val = readl(host->regs + SD_EMMC_CFG);
 809        val &= ~CFG_BUS_WIDTH_MASK;
 810        val |= FIELD_PREP(CFG_BUS_WIDTH_MASK, bus_width);
 811
 812        val &= ~CFG_DDR;
 813        if (meson_mmc_timing_is_ddr(ios))
 814                val |= CFG_DDR;
 815
 816        val &= ~CFG_CHK_DS;
 817        if (ios->timing == MMC_TIMING_MMC_HS400)
 818                val |= CFG_CHK_DS;
 819
 820        err = meson_mmc_clk_set(host, ios);
 821        if (err)
 822                dev_err(host->dev, "Failed to set clock: %d\n,", err);
 823
 824        writel(val, host->regs + SD_EMMC_CFG);
 825        dev_dbg(host->dev, "SD_EMMC_CFG:  0x%08x\n", val);
 826}
 827
 828static void meson_mmc_request_done(struct mmc_host *mmc,
 829                                   struct mmc_request *mrq)
 830{
 831        struct meson_host *host = mmc_priv(mmc);
 832
 833        host->cmd = NULL;
 834        mmc_request_done(host->mmc, mrq);
 835}
 836
 837static void meson_mmc_set_blksz(struct mmc_host *mmc, unsigned int blksz)
 838{
 839        struct meson_host *host = mmc_priv(mmc);
 840        u32 cfg, blksz_old;
 841
 842        cfg = readl(host->regs + SD_EMMC_CFG);
 843        blksz_old = FIELD_GET(CFG_BLK_LEN_MASK, cfg);
 844
 845        if (!is_power_of_2(blksz))
 846                dev_err(host->dev, "blksz %u is not a power of 2\n", blksz);
 847
 848        blksz = ilog2(blksz);
 849
 850        /* check if block-size matches, if not update */
 851        if (blksz == blksz_old)
 852                return;
 853
 854        dev_dbg(host->dev, "%s: update blk_len %d -> %d\n", __func__,
 855                blksz_old, blksz);
 856
 857        cfg &= ~CFG_BLK_LEN_MASK;
 858        cfg |= FIELD_PREP(CFG_BLK_LEN_MASK, blksz);
 859        writel(cfg, host->regs + SD_EMMC_CFG);
 860}
 861
 862static void meson_mmc_set_response_bits(struct mmc_command *cmd, u32 *cmd_cfg)
 863{
 864        if (cmd->flags & MMC_RSP_PRESENT) {
 865                if (cmd->flags & MMC_RSP_136)
 866                        *cmd_cfg |= CMD_CFG_RESP_128;
 867                *cmd_cfg |= CMD_CFG_RESP_NUM;
 868
 869                if (!(cmd->flags & MMC_RSP_CRC))
 870                        *cmd_cfg |= CMD_CFG_RESP_NOCRC;
 871
 872                if (cmd->flags & MMC_RSP_BUSY)
 873                        *cmd_cfg |= CMD_CFG_R1B;
 874        } else {
 875                *cmd_cfg |= CMD_CFG_NO_RESP;
 876        }
 877}
 878
 879static void meson_mmc_desc_chain_transfer(struct mmc_host *mmc, u32 cmd_cfg)
 880{
 881        struct meson_host *host = mmc_priv(mmc);
 882        struct sd_emmc_desc *desc = host->descs;
 883        struct mmc_data *data = host->cmd->data;
 884        struct scatterlist *sg;
 885        u32 start;
 886        int i;
 887
 888        if (data->flags & MMC_DATA_WRITE)
 889                cmd_cfg |= CMD_CFG_DATA_WR;
 890
 891        if (data->blocks > 1) {
 892                cmd_cfg |= CMD_CFG_BLOCK_MODE;
 893                meson_mmc_set_blksz(mmc, data->blksz);
 894        }
 895
 896        for_each_sg(data->sg, sg, data->sg_count, i) {
 897                unsigned int len = sg_dma_len(sg);
 898
 899                if (data->blocks > 1)
 900                        len /= data->blksz;
 901
 902                desc[i].cmd_cfg = cmd_cfg;
 903                desc[i].cmd_cfg |= FIELD_PREP(CMD_CFG_LENGTH_MASK, len);
 904                if (i > 0)
 905                        desc[i].cmd_cfg |= CMD_CFG_NO_CMD;
 906                desc[i].cmd_arg = host->cmd->arg;
 907                desc[i].cmd_resp = 0;
 908                desc[i].cmd_data = sg_dma_address(sg);
 909        }
 910        desc[data->sg_count - 1].cmd_cfg |= CMD_CFG_END_OF_CHAIN;
 911
 912        dma_wmb(); /* ensure descriptor is written before kicked */
 913        start = host->descs_dma_addr | START_DESC_BUSY;
 914        writel(start, host->regs + SD_EMMC_START);
 915}
 916
 917static void meson_mmc_start_cmd(struct mmc_host *mmc, struct mmc_command *cmd)
 918{
 919        struct meson_host *host = mmc_priv(mmc);
 920        struct mmc_data *data = cmd->data;
 921        u32 cmd_cfg = 0, cmd_data = 0;
 922        unsigned int xfer_bytes = 0;
 923
 924        /* Setup descriptors */
 925        dma_rmb();
 926
 927        host->cmd = cmd;
 928
 929        cmd_cfg |= FIELD_PREP(CMD_CFG_CMD_INDEX_MASK, cmd->opcode);
 930        cmd_cfg |= CMD_CFG_OWNER;  /* owned by CPU */
 931
 932        meson_mmc_set_response_bits(cmd, &cmd_cfg);
 933
 934        /* data? */
 935        if (data) {
 936                data->bytes_xfered = 0;
 937                cmd_cfg |= CMD_CFG_DATA_IO;
 938                cmd_cfg |= FIELD_PREP(CMD_CFG_TIMEOUT_MASK,
 939                                      ilog2(meson_mmc_get_timeout_msecs(data)));
 940
 941                if (meson_mmc_desc_chain_mode(data)) {
 942                        meson_mmc_desc_chain_transfer(mmc, cmd_cfg);
 943                        return;
 944                }
 945
 946                if (data->blocks > 1) {
 947                        cmd_cfg |= CMD_CFG_BLOCK_MODE;
 948                        cmd_cfg |= FIELD_PREP(CMD_CFG_LENGTH_MASK,
 949                                              data->blocks);
 950                        meson_mmc_set_blksz(mmc, data->blksz);
 951                } else {
 952                        cmd_cfg |= FIELD_PREP(CMD_CFG_LENGTH_MASK, data->blksz);
 953                }
 954
 955                xfer_bytes = data->blksz * data->blocks;
 956                if (data->flags & MMC_DATA_WRITE) {
 957                        cmd_cfg |= CMD_CFG_DATA_WR;
 958                        WARN_ON(xfer_bytes > host->bounce_buf_size);
 959                        sg_copy_to_buffer(data->sg, data->sg_len,
 960                                          host->bounce_buf, xfer_bytes);
 961                        dma_wmb();
 962                }
 963
 964                cmd_data = host->bounce_dma_addr & CMD_DATA_MASK;
 965        } else {
 966                cmd_cfg |= FIELD_PREP(CMD_CFG_TIMEOUT_MASK,
 967                                      ilog2(SD_EMMC_CMD_TIMEOUT));
 968        }
 969
 970        /* Last descriptor */
 971        cmd_cfg |= CMD_CFG_END_OF_CHAIN;
 972        writel(cmd_cfg, host->regs + SD_EMMC_CMD_CFG);
 973        writel(cmd_data, host->regs + SD_EMMC_CMD_DAT);
 974        writel(0, host->regs + SD_EMMC_CMD_RSP);
 975        wmb(); /* ensure descriptor is written before kicked */
 976        writel(cmd->arg, host->regs + SD_EMMC_CMD_ARG);
 977}
 978
 979static void meson_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq)
 980{
 981        struct meson_host *host = mmc_priv(mmc);
 982        bool needs_pre_post_req = mrq->data &&
 983                        !(mrq->data->host_cookie & SD_EMMC_PRE_REQ_DONE);
 984
 985        if (needs_pre_post_req) {
 986                meson_mmc_get_transfer_mode(mmc, mrq);
 987                if (!meson_mmc_desc_chain_mode(mrq->data))
 988                        needs_pre_post_req = false;
 989        }
 990
 991        if (needs_pre_post_req)
 992                meson_mmc_pre_req(mmc, mrq);
 993
 994        /* Stop execution */
 995        writel(0, host->regs + SD_EMMC_START);
 996
 997        meson_mmc_start_cmd(mmc, mrq->sbc ?: mrq->cmd);
 998
 999        if (needs_pre_post_req)
1000                meson_mmc_post_req(mmc, mrq, 0);
1001}
1002
1003static void meson_mmc_read_resp(struct mmc_host *mmc, struct mmc_command *cmd)
1004{
1005        struct meson_host *host = mmc_priv(mmc);
1006
1007        if (cmd->flags & MMC_RSP_136) {
1008                cmd->resp[0] = readl(host->regs + SD_EMMC_CMD_RSP3);
1009                cmd->resp[1] = readl(host->regs + SD_EMMC_CMD_RSP2);
1010                cmd->resp[2] = readl(host->regs + SD_EMMC_CMD_RSP1);
1011                cmd->resp[3] = readl(host->regs + SD_EMMC_CMD_RSP);
1012        } else if (cmd->flags & MMC_RSP_PRESENT) {
1013                cmd->resp[0] = readl(host->regs + SD_EMMC_CMD_RSP);
1014        }
1015}
1016
1017static irqreturn_t meson_mmc_irq(int irq, void *dev_id)
1018{
1019        struct meson_host *host = dev_id;
1020        struct mmc_command *cmd;
1021        struct mmc_data *data;
1022        u32 irq_en, status, raw_status;
1023        irqreturn_t ret = IRQ_NONE;
1024
1025        if (WARN_ON(!host) || WARN_ON(!host->cmd))
1026                return IRQ_NONE;
1027
1028        spin_lock(&host->lock);
1029
1030        cmd = host->cmd;
1031        data = cmd->data;
1032        irq_en = readl(host->regs + SD_EMMC_IRQ_EN);
1033        raw_status = readl(host->regs + SD_EMMC_STATUS);
1034        status = raw_status & irq_en;
1035
1036        cmd->error = 0;
1037        if (status & IRQ_CRC_ERR) {
1038                dev_dbg(host->dev, "CRC Error - status 0x%08x\n", status);
1039                cmd->error = -EILSEQ;
1040                ret = IRQ_HANDLED;
1041                goto out;
1042        }
1043
1044        if (status & IRQ_TIMEOUTS) {
1045                dev_dbg(host->dev, "Timeout - status 0x%08x\n", status);
1046                cmd->error = -ETIMEDOUT;
1047                ret = IRQ_HANDLED;
1048                goto out;
1049        }
1050
1051        meson_mmc_read_resp(host->mmc, cmd);
1052
1053        if (status & IRQ_SDIO) {
1054                dev_dbg(host->dev, "IRQ: SDIO TODO.\n");
1055                ret = IRQ_HANDLED;
1056        }
1057
1058        if (status & (IRQ_END_OF_CHAIN | IRQ_RESP_STATUS)) {
1059                if (data && !cmd->error)
1060                        data->bytes_xfered = data->blksz * data->blocks;
1061                if (meson_mmc_bounce_buf_read(data) ||
1062                    meson_mmc_get_next_command(cmd))
1063                        ret = IRQ_WAKE_THREAD;
1064                else
1065                        ret = IRQ_HANDLED;
1066        }
1067
1068out:
1069        /* ack all enabled interrupts */
1070        writel(irq_en, host->regs + SD_EMMC_STATUS);
1071
1072        if (ret == IRQ_HANDLED)
1073                meson_mmc_request_done(host->mmc, cmd->mrq);
1074        else if (ret == IRQ_NONE)
1075                dev_warn(host->dev,
1076                         "Unexpected IRQ! status=0x%08x, irq_en=0x%08x\n",
1077                         raw_status, irq_en);
1078
1079        spin_unlock(&host->lock);
1080        return ret;
1081}
1082
1083static irqreturn_t meson_mmc_irq_thread(int irq, void *dev_id)
1084{
1085        struct meson_host *host = dev_id;
1086        struct mmc_command *next_cmd, *cmd = host->cmd;
1087        struct mmc_data *data;
1088        unsigned int xfer_bytes;
1089
1090        if (WARN_ON(!cmd))
1091                return IRQ_NONE;
1092
1093        data = cmd->data;
1094        if (meson_mmc_bounce_buf_read(data)) {
1095                xfer_bytes = data->blksz * data->blocks;
1096                WARN_ON(xfer_bytes > host->bounce_buf_size);
1097                sg_copy_from_buffer(data->sg, data->sg_len,
1098                                    host->bounce_buf, xfer_bytes);
1099        }
1100
1101        next_cmd = meson_mmc_get_next_command(cmd);
1102        if (next_cmd)
1103                meson_mmc_start_cmd(host->mmc, next_cmd);
1104        else
1105                meson_mmc_request_done(host->mmc, cmd->mrq);
1106
1107        return IRQ_HANDLED;
1108}
1109
1110/*
1111 * NOTE: we only need this until the GPIO/pinctrl driver can handle
1112 * interrupts.  For now, the MMC core will use this for polling.
1113 */
1114static int meson_mmc_get_cd(struct mmc_host *mmc)
1115{
1116        int status = mmc_gpio_get_cd(mmc);
1117
1118        if (status == -ENOSYS)
1119                return 1; /* assume present */
1120
1121        return status;
1122}
1123
1124static void meson_mmc_cfg_init(struct meson_host *host)
1125{
1126        u32 cfg = 0;
1127
1128        cfg |= FIELD_PREP(CFG_RESP_TIMEOUT_MASK,
1129                          ilog2(SD_EMMC_CFG_RESP_TIMEOUT));
1130        cfg |= FIELD_PREP(CFG_RC_CC_MASK, ilog2(SD_EMMC_CFG_CMD_GAP));
1131        cfg |= FIELD_PREP(CFG_BLK_LEN_MASK, ilog2(SD_EMMC_CFG_BLK_SIZE));
1132
1133        writel(cfg, host->regs + SD_EMMC_CFG);
1134}
1135
1136static int meson_mmc_card_busy(struct mmc_host *mmc)
1137{
1138        struct meson_host *host = mmc_priv(mmc);
1139        u32 regval;
1140
1141        regval = readl(host->regs + SD_EMMC_STATUS);
1142
1143        /* We are only interrested in lines 0 to 3, so mask the other ones */
1144        return !(FIELD_GET(STATUS_DATI, regval) & 0xf);
1145}
1146
1147static int meson_mmc_voltage_switch(struct mmc_host *mmc, struct mmc_ios *ios)
1148{
1149        /* vqmmc regulator is available */
1150        if (!IS_ERR(mmc->supply.vqmmc)) {
1151                /*
1152                 * The usual amlogic setup uses a GPIO to switch from one
1153                 * regulator to the other. While the voltage ramp up is
1154                 * pretty fast, care must be taken when switching from 3.3v
1155                 * to 1.8v. Please make sure the regulator framework is aware
1156                 * of your own regulator constraints
1157                 */
1158                return mmc_regulator_set_vqmmc(mmc, ios);
1159        }
1160
1161        /* no vqmmc regulator, assume fixed regulator at 3/3.3V */
1162        if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_330)
1163                return 0;
1164
1165        return -EINVAL;
1166}
1167
1168static const struct mmc_host_ops meson_mmc_ops = {
1169        .request        = meson_mmc_request,
1170        .set_ios        = meson_mmc_set_ios,
1171        .get_cd         = meson_mmc_get_cd,
1172        .pre_req        = meson_mmc_pre_req,
1173        .post_req       = meson_mmc_post_req,
1174        .execute_tuning = meson_mmc_execute_tuning,
1175        .card_busy      = meson_mmc_card_busy,
1176        .start_signal_voltage_switch = meson_mmc_voltage_switch,
1177};
1178
1179static int meson_mmc_probe(struct platform_device *pdev)
1180{
1181        struct resource *res;
1182        struct meson_host *host;
1183        struct mmc_host *mmc;
1184        int ret, irq;
1185
1186        mmc = mmc_alloc_host(sizeof(struct meson_host), &pdev->dev);
1187        if (!mmc)
1188                return -ENOMEM;
1189        host = mmc_priv(mmc);
1190        host->mmc = mmc;
1191        host->dev = &pdev->dev;
1192        dev_set_drvdata(&pdev->dev, host);
1193
1194        spin_lock_init(&host->lock);
1195
1196        /* Get regulators and the supported OCR mask */
1197        host->vqmmc_enabled = false;
1198        ret = mmc_regulator_get_supply(mmc);
1199        if (ret)
1200                goto free_host;
1201
1202        ret = mmc_of_parse(mmc);
1203        if (ret) {
1204                if (ret != -EPROBE_DEFER)
1205                        dev_warn(&pdev->dev, "error parsing DT: %d\n", ret);
1206                goto free_host;
1207        }
1208
1209        host->data = (struct meson_mmc_data *)
1210                of_device_get_match_data(&pdev->dev);
1211        if (!host->data) {
1212                ret = -EINVAL;
1213                goto free_host;
1214        }
1215
1216        ret = device_reset_optional(&pdev->dev);
1217        if (ret) {
1218                if (ret != -EPROBE_DEFER)
1219                        dev_err(&pdev->dev, "device reset failed: %d\n", ret);
1220
1221                return ret;
1222        }
1223
1224        res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1225        host->regs = devm_ioremap_resource(&pdev->dev, res);
1226        if (IS_ERR(host->regs)) {
1227                ret = PTR_ERR(host->regs);
1228                goto free_host;
1229        }
1230
1231        irq = platform_get_irq(pdev, 0);
1232        if (irq <= 0) {
1233                dev_err(&pdev->dev, "failed to get interrupt resource.\n");
1234                ret = -EINVAL;
1235                goto free_host;
1236        }
1237
1238        host->pinctrl = devm_pinctrl_get(&pdev->dev);
1239        if (IS_ERR(host->pinctrl)) {
1240                ret = PTR_ERR(host->pinctrl);
1241                goto free_host;
1242        }
1243
1244        host->pins_default = pinctrl_lookup_state(host->pinctrl,
1245                                                  PINCTRL_STATE_DEFAULT);
1246        if (IS_ERR(host->pins_default)) {
1247                ret = PTR_ERR(host->pins_default);
1248                goto free_host;
1249        }
1250
1251        host->pins_clk_gate = pinctrl_lookup_state(host->pinctrl,
1252                                                   "clk-gate");
1253        if (IS_ERR(host->pins_clk_gate)) {
1254                dev_warn(&pdev->dev,
1255                         "can't get clk-gate pinctrl, using clk_stop bit\n");
1256                host->pins_clk_gate = NULL;
1257        }
1258
1259        host->core_clk = devm_clk_get(&pdev->dev, "core");
1260        if (IS_ERR(host->core_clk)) {
1261                ret = PTR_ERR(host->core_clk);
1262                goto free_host;
1263        }
1264
1265        ret = clk_prepare_enable(host->core_clk);
1266        if (ret)
1267                goto free_host;
1268
1269        ret = meson_mmc_clk_init(host);
1270        if (ret)
1271                goto err_core_clk;
1272
1273        /* set config to sane default */
1274        meson_mmc_cfg_init(host);
1275
1276        /* Stop execution */
1277        writel(0, host->regs + SD_EMMC_START);
1278
1279        /* clear, ack and enable interrupts */
1280        writel(0, host->regs + SD_EMMC_IRQ_EN);
1281        writel(IRQ_CRC_ERR | IRQ_TIMEOUTS | IRQ_END_OF_CHAIN,
1282               host->regs + SD_EMMC_STATUS);
1283        writel(IRQ_CRC_ERR | IRQ_TIMEOUTS | IRQ_END_OF_CHAIN,
1284               host->regs + SD_EMMC_IRQ_EN);
1285
1286        ret = devm_request_threaded_irq(&pdev->dev, irq, meson_mmc_irq,
1287                                        meson_mmc_irq_thread, IRQF_SHARED,
1288                                        NULL, host);
1289        if (ret)
1290                goto err_init_clk;
1291
1292        mmc->caps |= MMC_CAP_CMD23;
1293        mmc->max_blk_count = CMD_CFG_LENGTH_MASK;
1294        mmc->max_req_size = mmc->max_blk_count * mmc->max_blk_size;
1295        mmc->max_segs = SD_EMMC_DESC_BUF_LEN / sizeof(struct sd_emmc_desc);
1296        mmc->max_seg_size = mmc->max_req_size;
1297
1298        /* data bounce buffer */
1299        host->bounce_buf_size = mmc->max_req_size;
1300        host->bounce_buf =
1301                dma_alloc_coherent(host->dev, host->bounce_buf_size,
1302                                   &host->bounce_dma_addr, GFP_KERNEL);
1303        if (host->bounce_buf == NULL) {
1304                dev_err(host->dev, "Unable to map allocate DMA bounce buffer.\n");
1305                ret = -ENOMEM;
1306                goto err_init_clk;
1307        }
1308
1309        host->descs = dma_alloc_coherent(host->dev, SD_EMMC_DESC_BUF_LEN,
1310                      &host->descs_dma_addr, GFP_KERNEL);
1311        if (!host->descs) {
1312                dev_err(host->dev, "Allocating descriptor DMA buffer failed\n");
1313                ret = -ENOMEM;
1314                goto err_bounce_buf;
1315        }
1316
1317        mmc->ops = &meson_mmc_ops;
1318        mmc_add_host(mmc);
1319
1320        return 0;
1321
1322err_bounce_buf:
1323        dma_free_coherent(host->dev, host->bounce_buf_size,
1324                          host->bounce_buf, host->bounce_dma_addr);
1325err_init_clk:
1326        clk_disable_unprepare(host->mmc_clk);
1327err_core_clk:
1328        clk_disable_unprepare(host->core_clk);
1329free_host:
1330        mmc_free_host(mmc);
1331        return ret;
1332}
1333
1334static int meson_mmc_remove(struct platform_device *pdev)
1335{
1336        struct meson_host *host = dev_get_drvdata(&pdev->dev);
1337
1338        mmc_remove_host(host->mmc);
1339
1340        /* disable interrupts */
1341        writel(0, host->regs + SD_EMMC_IRQ_EN);
1342
1343        dma_free_coherent(host->dev, SD_EMMC_DESC_BUF_LEN,
1344                          host->descs, host->descs_dma_addr);
1345        dma_free_coherent(host->dev, host->bounce_buf_size,
1346                          host->bounce_buf, host->bounce_dma_addr);
1347
1348        clk_disable_unprepare(host->mmc_clk);
1349        clk_disable_unprepare(host->core_clk);
1350
1351        mmc_free_host(host->mmc);
1352        return 0;
1353}
1354
1355static const struct meson_mmc_data meson_gx_data = {
1356        .tx_delay_mask  = CLK_V2_TX_DELAY_MASK,
1357        .rx_delay_mask  = CLK_V2_RX_DELAY_MASK,
1358        .always_on      = CLK_V2_ALWAYS_ON,
1359};
1360
1361static const struct meson_mmc_data meson_axg_data = {
1362        .tx_delay_mask  = CLK_V3_TX_DELAY_MASK,
1363        .rx_delay_mask  = CLK_V3_RX_DELAY_MASK,
1364        .always_on      = CLK_V3_ALWAYS_ON,
1365};
1366
1367static const struct of_device_id meson_mmc_of_match[] = {
1368        { .compatible = "amlogic,meson-gx-mmc",         .data = &meson_gx_data },
1369        { .compatible = "amlogic,meson-gxbb-mmc",       .data = &meson_gx_data },
1370        { .compatible = "amlogic,meson-gxl-mmc",        .data = &meson_gx_data },
1371        { .compatible = "amlogic,meson-gxm-mmc",        .data = &meson_gx_data },
1372        { .compatible = "amlogic,meson-axg-mmc",        .data = &meson_axg_data },
1373        {}
1374};
1375MODULE_DEVICE_TABLE(of, meson_mmc_of_match);
1376
1377static struct platform_driver meson_mmc_driver = {
1378        .probe          = meson_mmc_probe,
1379        .remove         = meson_mmc_remove,
1380        .driver         = {
1381                .name = DRIVER_NAME,
1382                .of_match_table = of_match_ptr(meson_mmc_of_match),
1383        },
1384};
1385
1386module_platform_driver(meson_mmc_driver);
1387
1388MODULE_DESCRIPTION("Amlogic S905*/GX*/AXG SD/eMMC driver");
1389MODULE_AUTHOR("Kevin Hilman <khilman@baylibre.com>");
1390MODULE_LICENSE("GPL v2");
1391