linux/drivers/regulator/s2mps11.c
<<
>>
Prefs
   1/*
   2 * s2mps11.c
   3 *
   4 * Copyright (c) 2012-2014 Samsung Electronics Co., Ltd
   5 *              http://www.samsung.com
   6 *
   7 * This program is free software; you can redistribute  it and/or modify it
   8 * under  the terms of  the GNU General  Public License as published by the
   9 * Free Software Foundation;  either version 2 of the  License, or (at your
  10 * option) any later version.
  11 *
  12 * This program is distributed in the hope that it will be useful,
  13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
  14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15 * GNU General Public License for more details.
  16 *
  17 */
  18
  19#include <linux/bug.h>
  20#include <linux/err.h>
  21#include <linux/gpio.h>
  22#include <linux/slab.h>
  23#include <linux/module.h>
  24#include <linux/of.h>
  25#include <linux/regmap.h>
  26#include <linux/platform_device.h>
  27#include <linux/regulator/driver.h>
  28#include <linux/regulator/machine.h>
  29#include <linux/regulator/of_regulator.h>
  30#include <linux/of_gpio.h>
  31#include <linux/mfd/samsung/core.h>
  32#include <linux/mfd/samsung/s2mps11.h>
  33#include <linux/mfd/samsung/s2mps13.h>
  34#include <linux/mfd/samsung/s2mps14.h>
  35#include <linux/mfd/samsung/s2mps15.h>
  36#include <linux/mfd/samsung/s2mpu02.h>
  37
  38/* The highest number of possible regulators for supported devices. */
  39#define S2MPS_REGULATOR_MAX             S2MPS13_REGULATOR_MAX
  40struct s2mps11_info {
  41        int ramp_delay2;
  42        int ramp_delay34;
  43        int ramp_delay5;
  44        int ramp_delay16;
  45        int ramp_delay7810;
  46        int ramp_delay9;
  47
  48        enum sec_device_type dev_type;
  49
  50        /*
  51         * One bit for each S2MPS13/S2MPS14/S2MPU02 regulator whether
  52         * the suspend mode was enabled.
  53         */
  54        DECLARE_BITMAP(suspend_state, S2MPS_REGULATOR_MAX);
  55
  56        /*
  57         * Array (size: number of regulators) with GPIO-s for external
  58         * sleep control.
  59         */
  60        int *ext_control_gpio;
  61};
  62
  63static int get_ramp_delay(int ramp_delay)
  64{
  65        unsigned char cnt = 0;
  66
  67        ramp_delay /= 6250;
  68
  69        while (true) {
  70                ramp_delay = ramp_delay >> 1;
  71                if (ramp_delay == 0)
  72                        break;
  73                cnt++;
  74        }
  75
  76        if (cnt > 3)
  77                cnt = 3;
  78
  79        return cnt;
  80}
  81
  82static int s2mps11_regulator_set_voltage_time_sel(struct regulator_dev *rdev,
  83                                   unsigned int old_selector,
  84                                   unsigned int new_selector)
  85{
  86        struct s2mps11_info *s2mps11 = rdev_get_drvdata(rdev);
  87        unsigned int ramp_delay = 0;
  88        int old_volt, new_volt;
  89
  90        switch (rdev_get_id(rdev)) {
  91        case S2MPS11_BUCK2:
  92                ramp_delay = s2mps11->ramp_delay2;
  93                break;
  94        case S2MPS11_BUCK3:
  95        case S2MPS11_BUCK4:
  96                ramp_delay = s2mps11->ramp_delay34;
  97                break;
  98        case S2MPS11_BUCK5:
  99                ramp_delay = s2mps11->ramp_delay5;
 100                break;
 101        case S2MPS11_BUCK6:
 102        case S2MPS11_BUCK1:
 103                ramp_delay = s2mps11->ramp_delay16;
 104                break;
 105        case S2MPS11_BUCK7:
 106        case S2MPS11_BUCK8:
 107        case S2MPS11_BUCK10:
 108                ramp_delay = s2mps11->ramp_delay7810;
 109                break;
 110        case S2MPS11_BUCK9:
 111                ramp_delay = s2mps11->ramp_delay9;
 112        }
 113
 114        if (ramp_delay == 0)
 115                ramp_delay = rdev->desc->ramp_delay;
 116
 117        old_volt = rdev->desc->min_uV + (rdev->desc->uV_step * old_selector);
 118        new_volt = rdev->desc->min_uV + (rdev->desc->uV_step * new_selector);
 119
 120        return DIV_ROUND_UP(abs(new_volt - old_volt), ramp_delay);
 121}
 122
 123static int s2mps11_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
 124{
 125        struct s2mps11_info *s2mps11 = rdev_get_drvdata(rdev);
 126        unsigned int ramp_val, ramp_shift, ramp_reg = S2MPS11_REG_RAMP_BUCK;
 127        unsigned int ramp_enable = 1, enable_shift = 0;
 128        int ret;
 129
 130        switch (rdev_get_id(rdev)) {
 131        case S2MPS11_BUCK1:
 132                if (ramp_delay > s2mps11->ramp_delay16)
 133                        s2mps11->ramp_delay16 = ramp_delay;
 134                else
 135                        ramp_delay = s2mps11->ramp_delay16;
 136
 137                ramp_shift = S2MPS11_BUCK16_RAMP_SHIFT;
 138                break;
 139        case S2MPS11_BUCK2:
 140                enable_shift = S2MPS11_BUCK2_RAMP_EN_SHIFT;
 141                if (!ramp_delay) {
 142                        ramp_enable = 0;
 143                        break;
 144                }
 145
 146                s2mps11->ramp_delay2 = ramp_delay;
 147                ramp_shift = S2MPS11_BUCK2_RAMP_SHIFT;
 148                ramp_reg = S2MPS11_REG_RAMP;
 149                break;
 150        case S2MPS11_BUCK3:
 151                enable_shift = S2MPS11_BUCK3_RAMP_EN_SHIFT;
 152                if (!ramp_delay) {
 153                        ramp_enable = 0;
 154                        break;
 155                }
 156
 157                if (ramp_delay > s2mps11->ramp_delay34)
 158                        s2mps11->ramp_delay34 = ramp_delay;
 159                else
 160                        ramp_delay = s2mps11->ramp_delay34;
 161
 162                ramp_shift = S2MPS11_BUCK34_RAMP_SHIFT;
 163                ramp_reg = S2MPS11_REG_RAMP;
 164                break;
 165        case S2MPS11_BUCK4:
 166                enable_shift = S2MPS11_BUCK4_RAMP_EN_SHIFT;
 167                if (!ramp_delay) {
 168                        ramp_enable = 0;
 169                        break;
 170                }
 171
 172                if (ramp_delay > s2mps11->ramp_delay34)
 173                        s2mps11->ramp_delay34 = ramp_delay;
 174                else
 175                        ramp_delay = s2mps11->ramp_delay34;
 176
 177                ramp_shift = S2MPS11_BUCK34_RAMP_SHIFT;
 178                ramp_reg = S2MPS11_REG_RAMP;
 179                break;
 180        case S2MPS11_BUCK5:
 181                s2mps11->ramp_delay5 = ramp_delay;
 182                ramp_shift = S2MPS11_BUCK5_RAMP_SHIFT;
 183                break;
 184        case S2MPS11_BUCK6:
 185                enable_shift = S2MPS11_BUCK6_RAMP_EN_SHIFT;
 186                if (!ramp_delay) {
 187                        ramp_enable = 0;
 188                        break;
 189                }
 190
 191                if (ramp_delay > s2mps11->ramp_delay16)
 192                        s2mps11->ramp_delay16 = ramp_delay;
 193                else
 194                        ramp_delay = s2mps11->ramp_delay16;
 195
 196                ramp_shift = S2MPS11_BUCK16_RAMP_SHIFT;
 197                break;
 198        case S2MPS11_BUCK7:
 199        case S2MPS11_BUCK8:
 200        case S2MPS11_BUCK10:
 201                if (ramp_delay > s2mps11->ramp_delay7810)
 202                        s2mps11->ramp_delay7810 = ramp_delay;
 203                else
 204                        ramp_delay = s2mps11->ramp_delay7810;
 205
 206                ramp_shift = S2MPS11_BUCK7810_RAMP_SHIFT;
 207                break;
 208        case S2MPS11_BUCK9:
 209                s2mps11->ramp_delay9 = ramp_delay;
 210                ramp_shift = S2MPS11_BUCK9_RAMP_SHIFT;
 211                break;
 212        default:
 213                return 0;
 214        }
 215
 216        if (!ramp_enable)
 217                goto ramp_disable;
 218
 219        /* Ramp delay can be enabled/disabled only for buck[2346] */
 220        if ((rdev_get_id(rdev) >= S2MPS11_BUCK2 &&
 221                        rdev_get_id(rdev) <= S2MPS11_BUCK4) ||
 222                        rdev_get_id(rdev) == S2MPS11_BUCK6)  {
 223                ret = regmap_update_bits(rdev->regmap, S2MPS11_REG_RAMP,
 224                                         1 << enable_shift, 1 << enable_shift);
 225                if (ret) {
 226                        dev_err(&rdev->dev, "failed to enable ramp rate\n");
 227                        return ret;
 228                }
 229        }
 230
 231        ramp_val = get_ramp_delay(ramp_delay);
 232
 233        return regmap_update_bits(rdev->regmap, ramp_reg, 0x3 << ramp_shift,
 234                                  ramp_val << ramp_shift);
 235
 236ramp_disable:
 237        return regmap_update_bits(rdev->regmap, S2MPS11_REG_RAMP,
 238                                  1 << enable_shift, 0);
 239}
 240
 241static const struct regulator_ops s2mps11_ldo_ops = {
 242        .list_voltage           = regulator_list_voltage_linear,
 243        .map_voltage            = regulator_map_voltage_linear,
 244        .is_enabled             = regulator_is_enabled_regmap,
 245        .enable                 = regulator_enable_regmap,
 246        .disable                = regulator_disable_regmap,
 247        .get_voltage_sel        = regulator_get_voltage_sel_regmap,
 248        .set_voltage_sel        = regulator_set_voltage_sel_regmap,
 249        .set_voltage_time_sel   = regulator_set_voltage_time_sel,
 250};
 251
 252static const struct regulator_ops s2mps11_buck_ops = {
 253        .list_voltage           = regulator_list_voltage_linear,
 254        .map_voltage            = regulator_map_voltage_linear,
 255        .is_enabled             = regulator_is_enabled_regmap,
 256        .enable                 = regulator_enable_regmap,
 257        .disable                = regulator_disable_regmap,
 258        .get_voltage_sel        = regulator_get_voltage_sel_regmap,
 259        .set_voltage_sel        = regulator_set_voltage_sel_regmap,
 260        .set_voltage_time_sel   = s2mps11_regulator_set_voltage_time_sel,
 261        .set_ramp_delay         = s2mps11_set_ramp_delay,
 262};
 263
 264#define regulator_desc_s2mps11_ldo(num, step) {         \
 265        .name           = "LDO"#num,                    \
 266        .id             = S2MPS11_LDO##num,             \
 267        .ops            = &s2mps11_ldo_ops,             \
 268        .type           = REGULATOR_VOLTAGE,            \
 269        .owner          = THIS_MODULE,                  \
 270        .ramp_delay     = RAMP_DELAY_12_MVUS,           \
 271        .min_uV         = MIN_800_MV,                   \
 272        .uV_step        = step,                         \
 273        .n_voltages     = S2MPS11_LDO_N_VOLTAGES,       \
 274        .vsel_reg       = S2MPS11_REG_L1CTRL + num - 1, \
 275        .vsel_mask      = S2MPS11_LDO_VSEL_MASK,        \
 276        .enable_reg     = S2MPS11_REG_L1CTRL + num - 1, \
 277        .enable_mask    = S2MPS11_ENABLE_MASK           \
 278}
 279
 280#define regulator_desc_s2mps11_buck1_4(num) {                   \
 281        .name           = "BUCK"#num,                           \
 282        .id             = S2MPS11_BUCK##num,                    \
 283        .ops            = &s2mps11_buck_ops,                    \
 284        .type           = REGULATOR_VOLTAGE,                    \
 285        .owner          = THIS_MODULE,                          \
 286        .min_uV         = MIN_600_MV,                           \
 287        .uV_step        = STEP_6_25_MV,                         \
 288        .n_voltages     = S2MPS11_BUCK_N_VOLTAGES,              \
 289        .ramp_delay     = S2MPS11_RAMP_DELAY,                   \
 290        .vsel_reg       = S2MPS11_REG_B1CTRL2 + (num - 1) * 2,  \
 291        .vsel_mask      = S2MPS11_BUCK_VSEL_MASK,               \
 292        .enable_reg     = S2MPS11_REG_B1CTRL1 + (num - 1) * 2,  \
 293        .enable_mask    = S2MPS11_ENABLE_MASK                   \
 294}
 295
 296#define regulator_desc_s2mps11_buck5 {                          \
 297        .name           = "BUCK5",                              \
 298        .id             = S2MPS11_BUCK5,                        \
 299        .ops            = &s2mps11_buck_ops,                    \
 300        .type           = REGULATOR_VOLTAGE,                    \
 301        .owner          = THIS_MODULE,                          \
 302        .min_uV         = MIN_600_MV,                           \
 303        .uV_step        = STEP_6_25_MV,                         \
 304        .n_voltages     = S2MPS11_BUCK_N_VOLTAGES,              \
 305        .ramp_delay     = S2MPS11_RAMP_DELAY,                   \
 306        .vsel_reg       = S2MPS11_REG_B5CTRL2,                  \
 307        .vsel_mask      = S2MPS11_BUCK_VSEL_MASK,               \
 308        .enable_reg     = S2MPS11_REG_B5CTRL1,                  \
 309        .enable_mask    = S2MPS11_ENABLE_MASK                   \
 310}
 311
 312#define regulator_desc_s2mps11_buck67810(num, min, step) {      \
 313        .name           = "BUCK"#num,                           \
 314        .id             = S2MPS11_BUCK##num,                    \
 315        .ops            = &s2mps11_buck_ops,                    \
 316        .type           = REGULATOR_VOLTAGE,                    \
 317        .owner          = THIS_MODULE,                          \
 318        .min_uV         = min,                                  \
 319        .uV_step        = step,                                 \
 320        .n_voltages     = S2MPS11_BUCK_N_VOLTAGES,              \
 321        .ramp_delay     = S2MPS11_RAMP_DELAY,                   \
 322        .vsel_reg       = S2MPS11_REG_B6CTRL2 + (num - 6) * 2,  \
 323        .vsel_mask      = S2MPS11_BUCK_VSEL_MASK,               \
 324        .enable_reg     = S2MPS11_REG_B6CTRL1 + (num - 6) * 2,  \
 325        .enable_mask    = S2MPS11_ENABLE_MASK                   \
 326}
 327
 328#define regulator_desc_s2mps11_buck9 {                          \
 329        .name           = "BUCK9",                              \
 330        .id             = S2MPS11_BUCK9,                        \
 331        .ops            = &s2mps11_buck_ops,                    \
 332        .type           = REGULATOR_VOLTAGE,                    \
 333        .owner          = THIS_MODULE,                          \
 334        .min_uV         = MIN_3000_MV,                          \
 335        .uV_step        = STEP_25_MV,                           \
 336        .n_voltages     = S2MPS11_BUCK9_N_VOLTAGES,             \
 337        .ramp_delay     = S2MPS11_RAMP_DELAY,                   \
 338        .vsel_reg       = S2MPS11_REG_B9CTRL2,                  \
 339        .vsel_mask      = S2MPS11_BUCK9_VSEL_MASK,              \
 340        .enable_reg     = S2MPS11_REG_B9CTRL1,                  \
 341        .enable_mask    = S2MPS11_ENABLE_MASK                   \
 342}
 343
 344static const struct regulator_desc s2mps11_regulators[] = {
 345        regulator_desc_s2mps11_ldo(1, STEP_25_MV),
 346        regulator_desc_s2mps11_ldo(2, STEP_50_MV),
 347        regulator_desc_s2mps11_ldo(3, STEP_50_MV),
 348        regulator_desc_s2mps11_ldo(4, STEP_50_MV),
 349        regulator_desc_s2mps11_ldo(5, STEP_50_MV),
 350        regulator_desc_s2mps11_ldo(6, STEP_25_MV),
 351        regulator_desc_s2mps11_ldo(7, STEP_50_MV),
 352        regulator_desc_s2mps11_ldo(8, STEP_50_MV),
 353        regulator_desc_s2mps11_ldo(9, STEP_50_MV),
 354        regulator_desc_s2mps11_ldo(10, STEP_50_MV),
 355        regulator_desc_s2mps11_ldo(11, STEP_25_MV),
 356        regulator_desc_s2mps11_ldo(12, STEP_50_MV),
 357        regulator_desc_s2mps11_ldo(13, STEP_50_MV),
 358        regulator_desc_s2mps11_ldo(14, STEP_50_MV),
 359        regulator_desc_s2mps11_ldo(15, STEP_50_MV),
 360        regulator_desc_s2mps11_ldo(16, STEP_50_MV),
 361        regulator_desc_s2mps11_ldo(17, STEP_50_MV),
 362        regulator_desc_s2mps11_ldo(18, STEP_50_MV),
 363        regulator_desc_s2mps11_ldo(19, STEP_50_MV),
 364        regulator_desc_s2mps11_ldo(20, STEP_50_MV),
 365        regulator_desc_s2mps11_ldo(21, STEP_50_MV),
 366        regulator_desc_s2mps11_ldo(22, STEP_25_MV),
 367        regulator_desc_s2mps11_ldo(23, STEP_25_MV),
 368        regulator_desc_s2mps11_ldo(24, STEP_50_MV),
 369        regulator_desc_s2mps11_ldo(25, STEP_50_MV),
 370        regulator_desc_s2mps11_ldo(26, STEP_50_MV),
 371        regulator_desc_s2mps11_ldo(27, STEP_25_MV),
 372        regulator_desc_s2mps11_ldo(28, STEP_50_MV),
 373        regulator_desc_s2mps11_ldo(29, STEP_50_MV),
 374        regulator_desc_s2mps11_ldo(30, STEP_50_MV),
 375        regulator_desc_s2mps11_ldo(31, STEP_50_MV),
 376        regulator_desc_s2mps11_ldo(32, STEP_50_MV),
 377        regulator_desc_s2mps11_ldo(33, STEP_50_MV),
 378        regulator_desc_s2mps11_ldo(34, STEP_50_MV),
 379        regulator_desc_s2mps11_ldo(35, STEP_50_MV),
 380        regulator_desc_s2mps11_ldo(36, STEP_50_MV),
 381        regulator_desc_s2mps11_ldo(37, STEP_50_MV),
 382        regulator_desc_s2mps11_ldo(38, STEP_50_MV),
 383        regulator_desc_s2mps11_buck1_4(1),
 384        regulator_desc_s2mps11_buck1_4(2),
 385        regulator_desc_s2mps11_buck1_4(3),
 386        regulator_desc_s2mps11_buck1_4(4),
 387        regulator_desc_s2mps11_buck5,
 388        regulator_desc_s2mps11_buck67810(6, MIN_600_MV, STEP_6_25_MV),
 389        regulator_desc_s2mps11_buck67810(7, MIN_600_MV, STEP_6_25_MV),
 390        regulator_desc_s2mps11_buck67810(8, MIN_600_MV, STEP_6_25_MV),
 391        regulator_desc_s2mps11_buck9,
 392        regulator_desc_s2mps11_buck67810(10, MIN_750_MV, STEP_12_5_MV),
 393};
 394
 395static const struct regulator_ops s2mps14_reg_ops;
 396
 397#define regulator_desc_s2mps13_ldo(num, min, step, min_sel) {   \
 398        .name           = "LDO"#num,                            \
 399        .id             = S2MPS13_LDO##num,                     \
 400        .ops            = &s2mps14_reg_ops,                     \
 401        .type           = REGULATOR_VOLTAGE,                    \
 402        .owner          = THIS_MODULE,                          \
 403        .min_uV         = min,                                  \
 404        .uV_step        = step,                                 \
 405        .linear_min_sel = min_sel,                              \
 406        .n_voltages     = S2MPS14_LDO_N_VOLTAGES,               \
 407        .vsel_reg       = S2MPS13_REG_L1CTRL + num - 1,         \
 408        .vsel_mask      = S2MPS14_LDO_VSEL_MASK,                \
 409        .enable_reg     = S2MPS13_REG_L1CTRL + num - 1,         \
 410        .enable_mask    = S2MPS14_ENABLE_MASK                   \
 411}
 412
 413#define regulator_desc_s2mps13_buck(num, min, step, min_sel) {  \
 414        .name           = "BUCK"#num,                           \
 415        .id             = S2MPS13_BUCK##num,                    \
 416        .ops            = &s2mps14_reg_ops,                     \
 417        .type           = REGULATOR_VOLTAGE,                    \
 418        .owner          = THIS_MODULE,                          \
 419        .min_uV         = min,                                  \
 420        .uV_step        = step,                                 \
 421        .linear_min_sel = min_sel,                              \
 422        .n_voltages     = S2MPS14_BUCK_N_VOLTAGES,              \
 423        .ramp_delay     = S2MPS13_BUCK_RAMP_DELAY,              \
 424        .vsel_reg       = S2MPS13_REG_B1OUT + (num - 1) * 2,    \
 425        .vsel_mask      = S2MPS14_BUCK_VSEL_MASK,               \
 426        .enable_reg     = S2MPS13_REG_B1CTRL + (num - 1) * 2,   \
 427        .enable_mask    = S2MPS14_ENABLE_MASK                   \
 428}
 429
 430#define regulator_desc_s2mps13_buck7(num, min, step, min_sel) { \
 431        .name           = "BUCK"#num,                           \
 432        .id             = S2MPS13_BUCK##num,                    \
 433        .ops            = &s2mps14_reg_ops,                     \
 434        .type           = REGULATOR_VOLTAGE,                    \
 435        .owner          = THIS_MODULE,                          \
 436        .min_uV         = min,                                  \
 437        .uV_step        = step,                                 \
 438        .linear_min_sel = min_sel,                              \
 439        .n_voltages     = S2MPS14_BUCK_N_VOLTAGES,              \
 440        .ramp_delay     = S2MPS13_BUCK_RAMP_DELAY,              \
 441        .vsel_reg       = S2MPS13_REG_B1OUT + (num) * 2 - 1,    \
 442        .vsel_mask      = S2MPS14_BUCK_VSEL_MASK,               \
 443        .enable_reg     = S2MPS13_REG_B1CTRL + (num - 1) * 2,   \
 444        .enable_mask    = S2MPS14_ENABLE_MASK                   \
 445}
 446
 447#define regulator_desc_s2mps13_buck8_10(num, min, step, min_sel) {      \
 448        .name           = "BUCK"#num,                           \
 449        .id             = S2MPS13_BUCK##num,                    \
 450        .ops            = &s2mps14_reg_ops,                     \
 451        .type           = REGULATOR_VOLTAGE,                    \
 452        .owner          = THIS_MODULE,                          \
 453        .min_uV         = min,                                  \
 454        .uV_step        = step,                                 \
 455        .linear_min_sel = min_sel,                              \
 456        .n_voltages     = S2MPS14_BUCK_N_VOLTAGES,              \
 457        .ramp_delay     = S2MPS13_BUCK_RAMP_DELAY,              \
 458        .vsel_reg       = S2MPS13_REG_B1OUT + (num) * 2 - 1,    \
 459        .vsel_mask      = S2MPS14_BUCK_VSEL_MASK,               \
 460        .enable_reg     = S2MPS13_REG_B1CTRL + (num) * 2 - 1,   \
 461        .enable_mask    = S2MPS14_ENABLE_MASK                   \
 462}
 463
 464static const struct regulator_desc s2mps13_regulators[] = {
 465        regulator_desc_s2mps13_ldo(1,  MIN_800_MV,  STEP_12_5_MV, 0x00),
 466        regulator_desc_s2mps13_ldo(2,  MIN_1400_MV, STEP_50_MV,   0x0C),
 467        regulator_desc_s2mps13_ldo(3,  MIN_1000_MV, STEP_25_MV,   0x08),
 468        regulator_desc_s2mps13_ldo(4,  MIN_800_MV,  STEP_12_5_MV, 0x00),
 469        regulator_desc_s2mps13_ldo(5,  MIN_800_MV,  STEP_12_5_MV, 0x00),
 470        regulator_desc_s2mps13_ldo(6,  MIN_800_MV,  STEP_12_5_MV, 0x00),
 471        regulator_desc_s2mps13_ldo(7,  MIN_1000_MV, STEP_25_MV,   0x08),
 472        regulator_desc_s2mps13_ldo(8,  MIN_1000_MV, STEP_25_MV,   0x08),
 473        regulator_desc_s2mps13_ldo(9,  MIN_1000_MV, STEP_25_MV,   0x08),
 474        regulator_desc_s2mps13_ldo(10, MIN_1400_MV, STEP_50_MV,   0x0C),
 475        regulator_desc_s2mps13_ldo(11, MIN_800_MV,  STEP_25_MV,   0x10),
 476        regulator_desc_s2mps13_ldo(12, MIN_800_MV,  STEP_25_MV,   0x10),
 477        regulator_desc_s2mps13_ldo(13, MIN_800_MV,  STEP_25_MV,   0x10),
 478        regulator_desc_s2mps13_ldo(14, MIN_800_MV,  STEP_12_5_MV, 0x00),
 479        regulator_desc_s2mps13_ldo(15, MIN_800_MV,  STEP_12_5_MV, 0x00),
 480        regulator_desc_s2mps13_ldo(16, MIN_1400_MV, STEP_50_MV,   0x0C),
 481        regulator_desc_s2mps13_ldo(17, MIN_1400_MV, STEP_50_MV,   0x0C),
 482        regulator_desc_s2mps13_ldo(18, MIN_1000_MV, STEP_25_MV,   0x08),
 483        regulator_desc_s2mps13_ldo(19, MIN_1000_MV, STEP_25_MV,   0x08),
 484        regulator_desc_s2mps13_ldo(20, MIN_1400_MV, STEP_50_MV,   0x0C),
 485        regulator_desc_s2mps13_ldo(21, MIN_1000_MV, STEP_25_MV,   0x08),
 486        regulator_desc_s2mps13_ldo(22, MIN_1000_MV, STEP_25_MV,   0x08),
 487        regulator_desc_s2mps13_ldo(23, MIN_800_MV,  STEP_12_5_MV, 0x00),
 488        regulator_desc_s2mps13_ldo(24, MIN_800_MV,  STEP_12_5_MV, 0x00),
 489        regulator_desc_s2mps13_ldo(25, MIN_1400_MV, STEP_50_MV,   0x0C),
 490        regulator_desc_s2mps13_ldo(26, MIN_1400_MV, STEP_50_MV,   0x0C),
 491        regulator_desc_s2mps13_ldo(27, MIN_1400_MV, STEP_50_MV,   0x0C),
 492        regulator_desc_s2mps13_ldo(28, MIN_1000_MV, STEP_25_MV,   0x08),
 493        regulator_desc_s2mps13_ldo(29, MIN_1400_MV, STEP_50_MV,   0x0C),
 494        regulator_desc_s2mps13_ldo(30, MIN_1400_MV, STEP_50_MV,   0x0C),
 495        regulator_desc_s2mps13_ldo(31, MIN_1000_MV, STEP_25_MV,   0x08),
 496        regulator_desc_s2mps13_ldo(32, MIN_1000_MV, STEP_25_MV,   0x08),
 497        regulator_desc_s2mps13_ldo(33, MIN_1400_MV, STEP_50_MV,   0x0C),
 498        regulator_desc_s2mps13_ldo(34, MIN_1000_MV, STEP_25_MV,   0x08),
 499        regulator_desc_s2mps13_ldo(35, MIN_1400_MV, STEP_50_MV,   0x0C),
 500        regulator_desc_s2mps13_ldo(36, MIN_800_MV,  STEP_12_5_MV, 0x00),
 501        regulator_desc_s2mps13_ldo(37, MIN_1000_MV, STEP_25_MV,   0x08),
 502        regulator_desc_s2mps13_ldo(38, MIN_1400_MV, STEP_50_MV,   0x0C),
 503        regulator_desc_s2mps13_ldo(39, MIN_1000_MV, STEP_25_MV,   0x08),
 504        regulator_desc_s2mps13_ldo(40, MIN_1400_MV, STEP_50_MV,   0x0C),
 505        regulator_desc_s2mps13_buck(1,  MIN_500_MV,  STEP_6_25_MV, 0x10),
 506        regulator_desc_s2mps13_buck(2,  MIN_500_MV,  STEP_6_25_MV, 0x10),
 507        regulator_desc_s2mps13_buck(3,  MIN_500_MV,  STEP_6_25_MV, 0x10),
 508        regulator_desc_s2mps13_buck(4,  MIN_500_MV,  STEP_6_25_MV, 0x10),
 509        regulator_desc_s2mps13_buck(5,  MIN_500_MV,  STEP_6_25_MV, 0x10),
 510        regulator_desc_s2mps13_buck(6,  MIN_500_MV,  STEP_6_25_MV, 0x10),
 511        regulator_desc_s2mps13_buck7(7,  MIN_500_MV,  STEP_6_25_MV, 0x10),
 512        regulator_desc_s2mps13_buck8_10(8,  MIN_1000_MV, STEP_12_5_MV, 0x20),
 513        regulator_desc_s2mps13_buck8_10(9,  MIN_1000_MV, STEP_12_5_MV, 0x20),
 514        regulator_desc_s2mps13_buck8_10(10, MIN_500_MV,  STEP_6_25_MV, 0x10),
 515};
 516
 517static int s2mps14_regulator_enable(struct regulator_dev *rdev)
 518{
 519        struct s2mps11_info *s2mps11 = rdev_get_drvdata(rdev);
 520        unsigned int val;
 521
 522        switch (s2mps11->dev_type) {
 523        case S2MPS13X:
 524        case S2MPS14X:
 525                if (test_bit(rdev_get_id(rdev), s2mps11->suspend_state))
 526                        val = S2MPS14_ENABLE_SUSPEND;
 527                else if (gpio_is_valid(s2mps11->ext_control_gpio[rdev_get_id(rdev)]))
 528                        val = S2MPS14_ENABLE_EXT_CONTROL;
 529                else
 530                        val = rdev->desc->enable_mask;
 531                break;
 532        case S2MPU02:
 533                if (test_bit(rdev_get_id(rdev), s2mps11->suspend_state))
 534                        val = S2MPU02_ENABLE_SUSPEND;
 535                else
 536                        val = rdev->desc->enable_mask;
 537                break;
 538        default:
 539                return -EINVAL;
 540        }
 541
 542        return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
 543                        rdev->desc->enable_mask, val);
 544}
 545
 546static int s2mps14_regulator_set_suspend_disable(struct regulator_dev *rdev)
 547{
 548        int ret;
 549        unsigned int val, state;
 550        struct s2mps11_info *s2mps11 = rdev_get_drvdata(rdev);
 551        int rdev_id = rdev_get_id(rdev);
 552
 553        /* Below LDO should be always on or does not support suspend mode. */
 554        switch (s2mps11->dev_type) {
 555        case S2MPS13X:
 556        case S2MPS14X:
 557                switch (rdev_id) {
 558                case S2MPS14_LDO3:
 559                        return 0;
 560                default:
 561                        state = S2MPS14_ENABLE_SUSPEND;
 562                        break;
 563                }
 564                break;
 565        case S2MPU02:
 566                switch (rdev_id) {
 567                case S2MPU02_LDO13:
 568                case S2MPU02_LDO14:
 569                case S2MPU02_LDO15:
 570                case S2MPU02_LDO17:
 571                case S2MPU02_BUCK7:
 572                        state = S2MPU02_DISABLE_SUSPEND;
 573                        break;
 574                default:
 575                        state = S2MPU02_ENABLE_SUSPEND;
 576                        break;
 577                }
 578                break;
 579        default:
 580                return -EINVAL;
 581        }
 582
 583        ret = regmap_read(rdev->regmap, rdev->desc->enable_reg, &val);
 584        if (ret < 0)
 585                return ret;
 586
 587        set_bit(rdev_get_id(rdev), s2mps11->suspend_state);
 588        /*
 589         * Don't enable suspend mode if regulator is already disabled because
 590         * this would effectively for a short time turn on the regulator after
 591         * resuming.
 592         * However we still want to toggle the suspend_state bit for regulator
 593         * in case if it got enabled before suspending the system.
 594         */
 595        if (!(val & rdev->desc->enable_mask))
 596                return 0;
 597
 598        return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
 599                        rdev->desc->enable_mask, state);
 600}
 601
 602static const struct regulator_ops s2mps14_reg_ops = {
 603        .list_voltage           = regulator_list_voltage_linear,
 604        .map_voltage            = regulator_map_voltage_linear,
 605        .is_enabled             = regulator_is_enabled_regmap,
 606        .enable                 = s2mps14_regulator_enable,
 607        .disable                = regulator_disable_regmap,
 608        .get_voltage_sel        = regulator_get_voltage_sel_regmap,
 609        .set_voltage_sel        = regulator_set_voltage_sel_regmap,
 610        .set_voltage_time_sel   = regulator_set_voltage_time_sel,
 611        .set_suspend_disable    = s2mps14_regulator_set_suspend_disable,
 612};
 613
 614#define regulator_desc_s2mps14_ldo(num, min, step) {    \
 615        .name           = "LDO"#num,                    \
 616        .id             = S2MPS14_LDO##num,             \
 617        .ops            = &s2mps14_reg_ops,             \
 618        .type           = REGULATOR_VOLTAGE,            \
 619        .owner          = THIS_MODULE,                  \
 620        .min_uV         = min,                          \
 621        .uV_step        = step,                         \
 622        .n_voltages     = S2MPS14_LDO_N_VOLTAGES,       \
 623        .vsel_reg       = S2MPS14_REG_L1CTRL + num - 1, \
 624        .vsel_mask      = S2MPS14_LDO_VSEL_MASK,        \
 625        .enable_reg     = S2MPS14_REG_L1CTRL + num - 1, \
 626        .enable_mask    = S2MPS14_ENABLE_MASK           \
 627}
 628
 629#define regulator_desc_s2mps14_buck(num, min, step, min_sel) {  \
 630        .name           = "BUCK"#num,                           \
 631        .id             = S2MPS14_BUCK##num,                    \
 632        .ops            = &s2mps14_reg_ops,                     \
 633        .type           = REGULATOR_VOLTAGE,                    \
 634        .owner          = THIS_MODULE,                          \
 635        .min_uV         = min,                                  \
 636        .uV_step        = step,                                 \
 637        .n_voltages     = S2MPS14_BUCK_N_VOLTAGES,              \
 638        .linear_min_sel = min_sel,                              \
 639        .ramp_delay     = S2MPS14_BUCK_RAMP_DELAY,              \
 640        .vsel_reg       = S2MPS14_REG_B1CTRL2 + (num - 1) * 2,  \
 641        .vsel_mask      = S2MPS14_BUCK_VSEL_MASK,               \
 642        .enable_reg     = S2MPS14_REG_B1CTRL1 + (num - 1) * 2,  \
 643        .enable_mask    = S2MPS14_ENABLE_MASK                   \
 644}
 645
 646static const struct regulator_desc s2mps14_regulators[] = {
 647        regulator_desc_s2mps14_ldo(1, MIN_800_MV, STEP_12_5_MV),
 648        regulator_desc_s2mps14_ldo(2, MIN_800_MV, STEP_12_5_MV),
 649        regulator_desc_s2mps14_ldo(3, MIN_800_MV, STEP_25_MV),
 650        regulator_desc_s2mps14_ldo(4, MIN_800_MV, STEP_25_MV),
 651        regulator_desc_s2mps14_ldo(5, MIN_800_MV, STEP_12_5_MV),
 652        regulator_desc_s2mps14_ldo(6, MIN_800_MV, STEP_12_5_MV),
 653        regulator_desc_s2mps14_ldo(7, MIN_800_MV, STEP_25_MV),
 654        regulator_desc_s2mps14_ldo(8, MIN_1800_MV, STEP_25_MV),
 655        regulator_desc_s2mps14_ldo(9, MIN_800_MV, STEP_12_5_MV),
 656        regulator_desc_s2mps14_ldo(10, MIN_800_MV, STEP_12_5_MV),
 657        regulator_desc_s2mps14_ldo(11, MIN_800_MV, STEP_25_MV),
 658        regulator_desc_s2mps14_ldo(12, MIN_1800_MV, STEP_25_MV),
 659        regulator_desc_s2mps14_ldo(13, MIN_1800_MV, STEP_25_MV),
 660        regulator_desc_s2mps14_ldo(14, MIN_1800_MV, STEP_25_MV),
 661        regulator_desc_s2mps14_ldo(15, MIN_1800_MV, STEP_25_MV),
 662        regulator_desc_s2mps14_ldo(16, MIN_1800_MV, STEP_25_MV),
 663        regulator_desc_s2mps14_ldo(17, MIN_1800_MV, STEP_25_MV),
 664        regulator_desc_s2mps14_ldo(18, MIN_1800_MV, STEP_25_MV),
 665        regulator_desc_s2mps14_ldo(19, MIN_800_MV, STEP_25_MV),
 666        regulator_desc_s2mps14_ldo(20, MIN_800_MV, STEP_25_MV),
 667        regulator_desc_s2mps14_ldo(21, MIN_800_MV, STEP_25_MV),
 668        regulator_desc_s2mps14_ldo(22, MIN_800_MV, STEP_12_5_MV),
 669        regulator_desc_s2mps14_ldo(23, MIN_800_MV, STEP_25_MV),
 670        regulator_desc_s2mps14_ldo(24, MIN_1800_MV, STEP_25_MV),
 671        regulator_desc_s2mps14_ldo(25, MIN_1800_MV, STEP_25_MV),
 672        regulator_desc_s2mps14_buck(1, MIN_600_MV, STEP_6_25_MV,
 673                                    S2MPS14_BUCK1235_START_SEL),
 674        regulator_desc_s2mps14_buck(2, MIN_600_MV, STEP_6_25_MV,
 675                                    S2MPS14_BUCK1235_START_SEL),
 676        regulator_desc_s2mps14_buck(3, MIN_600_MV, STEP_6_25_MV,
 677                                    S2MPS14_BUCK1235_START_SEL),
 678        regulator_desc_s2mps14_buck(4, MIN_1400_MV, STEP_12_5_MV,
 679                                    S2MPS14_BUCK4_START_SEL),
 680        regulator_desc_s2mps14_buck(5, MIN_600_MV, STEP_6_25_MV,
 681                                    S2MPS14_BUCK1235_START_SEL),
 682};
 683
 684static const struct regulator_ops s2mps15_reg_ldo_ops = {
 685        .list_voltage           = regulator_list_voltage_linear_range,
 686        .map_voltage            = regulator_map_voltage_linear_range,
 687        .is_enabled             = regulator_is_enabled_regmap,
 688        .enable                 = regulator_enable_regmap,
 689        .disable                = regulator_disable_regmap,
 690        .get_voltage_sel        = regulator_get_voltage_sel_regmap,
 691        .set_voltage_sel        = regulator_set_voltage_sel_regmap,
 692};
 693
 694static const struct regulator_ops s2mps15_reg_buck_ops = {
 695        .list_voltage           = regulator_list_voltage_linear_range,
 696        .map_voltage            = regulator_map_voltage_linear_range,
 697        .is_enabled             = regulator_is_enabled_regmap,
 698        .enable                 = regulator_enable_regmap,
 699        .disable                = regulator_disable_regmap,
 700        .get_voltage_sel        = regulator_get_voltage_sel_regmap,
 701        .set_voltage_sel        = regulator_set_voltage_sel_regmap,
 702        .set_voltage_time_sel   = regulator_set_voltage_time_sel,
 703};
 704
 705#define regulator_desc_s2mps15_ldo(num, range) {        \
 706        .name           = "LDO"#num,                    \
 707        .id             = S2MPS15_LDO##num,             \
 708        .ops            = &s2mps15_reg_ldo_ops,         \
 709        .type           = REGULATOR_VOLTAGE,            \
 710        .owner          = THIS_MODULE,                  \
 711        .linear_ranges  = range,                        \
 712        .n_linear_ranges = ARRAY_SIZE(range),           \
 713        .n_voltages     = S2MPS15_LDO_N_VOLTAGES,       \
 714        .vsel_reg       = S2MPS15_REG_L1CTRL + num - 1, \
 715        .vsel_mask      = S2MPS15_LDO_VSEL_MASK,        \
 716        .enable_reg     = S2MPS15_REG_L1CTRL + num - 1, \
 717        .enable_mask    = S2MPS15_ENABLE_MASK           \
 718}
 719
 720#define regulator_desc_s2mps15_buck(num, range) {                       \
 721        .name           = "BUCK"#num,                                   \
 722        .id             = S2MPS15_BUCK##num,                            \
 723        .ops            = &s2mps15_reg_buck_ops,                        \
 724        .type           = REGULATOR_VOLTAGE,                            \
 725        .owner          = THIS_MODULE,                                  \
 726        .linear_ranges  = range,                                        \
 727        .n_linear_ranges = ARRAY_SIZE(range),                           \
 728        .ramp_delay     = 12500,                                        \
 729        .n_voltages     = S2MPS15_BUCK_N_VOLTAGES,                      \
 730        .vsel_reg       = S2MPS15_REG_B1CTRL2 + ((num - 1) * 2),        \
 731        .vsel_mask      = S2MPS15_BUCK_VSEL_MASK,                       \
 732        .enable_reg     = S2MPS15_REG_B1CTRL1 + ((num - 1) * 2),        \
 733        .enable_mask    = S2MPS15_ENABLE_MASK                           \
 734}
 735
 736/* voltage range for s2mps15 LDO 3, 5, 15, 16, 18, 20, 23 and 27 */
 737static const struct regulator_linear_range s2mps15_ldo_voltage_ranges1[] = {
 738        REGULATOR_LINEAR_RANGE(1000000, 0xc, 0x38, 25000),
 739};
 740
 741/* voltage range for s2mps15 LDO 2, 6, 14, 17, 19, 21, 24 and 25 */
 742static const struct regulator_linear_range s2mps15_ldo_voltage_ranges2[] = {
 743        REGULATOR_LINEAR_RANGE(1800000, 0x0, 0x3f, 25000),
 744};
 745
 746/* voltage range for s2mps15 LDO 4, 11, 12, 13, 22 and 26 */
 747static const struct regulator_linear_range s2mps15_ldo_voltage_ranges3[] = {
 748        REGULATOR_LINEAR_RANGE(700000, 0x0, 0x34, 12500),
 749};
 750
 751/* voltage range for s2mps15 LDO 7, 8, 9 and 10 */
 752static const struct regulator_linear_range s2mps15_ldo_voltage_ranges4[] = {
 753        REGULATOR_LINEAR_RANGE(700000, 0x10, 0x20, 25000),
 754};
 755
 756/* voltage range for s2mps15 LDO 1 */
 757static const struct regulator_linear_range s2mps15_ldo_voltage_ranges5[] = {
 758        REGULATOR_LINEAR_RANGE(500000, 0x0, 0x20, 12500),
 759};
 760
 761/* voltage range for s2mps15 BUCK 1, 2, 3, 4, 5, 6 and 7 */
 762static const struct regulator_linear_range s2mps15_buck_voltage_ranges1[] = {
 763        REGULATOR_LINEAR_RANGE(500000, 0x20, 0xc0, 6250),
 764};
 765
 766/* voltage range for s2mps15 BUCK 8, 9 and 10 */
 767static const struct regulator_linear_range s2mps15_buck_voltage_ranges2[] = {
 768        REGULATOR_LINEAR_RANGE(1000000, 0x20, 0x78, 12500),
 769};
 770
 771static const struct regulator_desc s2mps15_regulators[] = {
 772        regulator_desc_s2mps15_ldo(1, s2mps15_ldo_voltage_ranges5),
 773        regulator_desc_s2mps15_ldo(2, s2mps15_ldo_voltage_ranges2),
 774        regulator_desc_s2mps15_ldo(3, s2mps15_ldo_voltage_ranges1),
 775        regulator_desc_s2mps15_ldo(4, s2mps15_ldo_voltage_ranges3),
 776        regulator_desc_s2mps15_ldo(5, s2mps15_ldo_voltage_ranges1),
 777        regulator_desc_s2mps15_ldo(6, s2mps15_ldo_voltage_ranges2),
 778        regulator_desc_s2mps15_ldo(7, s2mps15_ldo_voltage_ranges4),
 779        regulator_desc_s2mps15_ldo(8, s2mps15_ldo_voltage_ranges4),
 780        regulator_desc_s2mps15_ldo(9, s2mps15_ldo_voltage_ranges4),
 781        regulator_desc_s2mps15_ldo(10, s2mps15_ldo_voltage_ranges4),
 782        regulator_desc_s2mps15_ldo(11, s2mps15_ldo_voltage_ranges3),
 783        regulator_desc_s2mps15_ldo(12, s2mps15_ldo_voltage_ranges3),
 784        regulator_desc_s2mps15_ldo(13, s2mps15_ldo_voltage_ranges3),
 785        regulator_desc_s2mps15_ldo(14, s2mps15_ldo_voltage_ranges2),
 786        regulator_desc_s2mps15_ldo(15, s2mps15_ldo_voltage_ranges1),
 787        regulator_desc_s2mps15_ldo(16, s2mps15_ldo_voltage_ranges1),
 788        regulator_desc_s2mps15_ldo(17, s2mps15_ldo_voltage_ranges2),
 789        regulator_desc_s2mps15_ldo(18, s2mps15_ldo_voltage_ranges1),
 790        regulator_desc_s2mps15_ldo(19, s2mps15_ldo_voltage_ranges2),
 791        regulator_desc_s2mps15_ldo(20, s2mps15_ldo_voltage_ranges1),
 792        regulator_desc_s2mps15_ldo(21, s2mps15_ldo_voltage_ranges2),
 793        regulator_desc_s2mps15_ldo(22, s2mps15_ldo_voltage_ranges3),
 794        regulator_desc_s2mps15_ldo(23, s2mps15_ldo_voltage_ranges1),
 795        regulator_desc_s2mps15_ldo(24, s2mps15_ldo_voltage_ranges2),
 796        regulator_desc_s2mps15_ldo(25, s2mps15_ldo_voltage_ranges2),
 797        regulator_desc_s2mps15_ldo(26, s2mps15_ldo_voltage_ranges3),
 798        regulator_desc_s2mps15_ldo(27, s2mps15_ldo_voltage_ranges1),
 799        regulator_desc_s2mps15_buck(1, s2mps15_buck_voltage_ranges1),
 800        regulator_desc_s2mps15_buck(2, s2mps15_buck_voltage_ranges1),
 801        regulator_desc_s2mps15_buck(3, s2mps15_buck_voltage_ranges1),
 802        regulator_desc_s2mps15_buck(4, s2mps15_buck_voltage_ranges1),
 803        regulator_desc_s2mps15_buck(5, s2mps15_buck_voltage_ranges1),
 804        regulator_desc_s2mps15_buck(6, s2mps15_buck_voltage_ranges1),
 805        regulator_desc_s2mps15_buck(7, s2mps15_buck_voltage_ranges1),
 806        regulator_desc_s2mps15_buck(8, s2mps15_buck_voltage_ranges2),
 807        regulator_desc_s2mps15_buck(9, s2mps15_buck_voltage_ranges2),
 808        regulator_desc_s2mps15_buck(10, s2mps15_buck_voltage_ranges2),
 809};
 810
 811static int s2mps14_pmic_enable_ext_control(struct s2mps11_info *s2mps11,
 812                struct regulator_dev *rdev)
 813{
 814        return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
 815                        rdev->desc->enable_mask, S2MPS14_ENABLE_EXT_CONTROL);
 816}
 817
 818static void s2mps14_pmic_dt_parse_ext_control_gpio(struct platform_device *pdev,
 819                struct of_regulator_match *rdata, struct s2mps11_info *s2mps11)
 820{
 821        int *gpio = s2mps11->ext_control_gpio;
 822        unsigned int i;
 823        unsigned int valid_regulators[3] = { S2MPS14_LDO10, S2MPS14_LDO11,
 824                S2MPS14_LDO12 };
 825
 826        for (i = 0; i < ARRAY_SIZE(valid_regulators); i++) {
 827                unsigned int reg = valid_regulators[i];
 828
 829                if (!rdata[reg].init_data || !rdata[reg].of_node)
 830                        continue;
 831
 832                gpio[reg] = of_get_named_gpio(rdata[reg].of_node,
 833                                "samsung,ext-control-gpios", 0);
 834                if (gpio_is_valid(gpio[reg]))
 835                        dev_dbg(&pdev->dev, "Using GPIO %d for ext-control over %d/%s\n",
 836                                        gpio[reg], reg, rdata[reg].name);
 837        }
 838}
 839
 840static int s2mps11_pmic_dt_parse(struct platform_device *pdev,
 841                struct of_regulator_match *rdata, struct s2mps11_info *s2mps11,
 842                unsigned int rdev_num)
 843{
 844        struct device_node *reg_np;
 845
 846        reg_np = of_get_child_by_name(pdev->dev.parent->of_node, "regulators");
 847        if (!reg_np) {
 848                dev_err(&pdev->dev, "could not find regulators sub-node\n");
 849                return -EINVAL;
 850        }
 851
 852        of_regulator_match(&pdev->dev, reg_np, rdata, rdev_num);
 853        if (s2mps11->dev_type == S2MPS14X)
 854                s2mps14_pmic_dt_parse_ext_control_gpio(pdev, rdata, s2mps11);
 855
 856        of_node_put(reg_np);
 857
 858        return 0;
 859}
 860
 861static int s2mpu02_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
 862{
 863        unsigned int ramp_val, ramp_shift, ramp_reg;
 864
 865        switch (rdev_get_id(rdev)) {
 866        case S2MPU02_BUCK1:
 867                ramp_shift = S2MPU02_BUCK1_RAMP_SHIFT;
 868                break;
 869        case S2MPU02_BUCK2:
 870                ramp_shift = S2MPU02_BUCK2_RAMP_SHIFT;
 871                break;
 872        case S2MPU02_BUCK3:
 873                ramp_shift = S2MPU02_BUCK3_RAMP_SHIFT;
 874                break;
 875        case S2MPU02_BUCK4:
 876                ramp_shift = S2MPU02_BUCK4_RAMP_SHIFT;
 877                break;
 878        default:
 879                return 0;
 880        }
 881        ramp_reg = S2MPU02_REG_RAMP1;
 882        ramp_val = get_ramp_delay(ramp_delay);
 883
 884        return regmap_update_bits(rdev->regmap, ramp_reg,
 885                                  S2MPU02_BUCK1234_RAMP_MASK << ramp_shift,
 886                                  ramp_val << ramp_shift);
 887}
 888
 889static const struct regulator_ops s2mpu02_ldo_ops = {
 890        .list_voltage           = regulator_list_voltage_linear,
 891        .map_voltage            = regulator_map_voltage_linear,
 892        .is_enabled             = regulator_is_enabled_regmap,
 893        .enable                 = s2mps14_regulator_enable,
 894        .disable                = regulator_disable_regmap,
 895        .get_voltage_sel        = regulator_get_voltage_sel_regmap,
 896        .set_voltage_sel        = regulator_set_voltage_sel_regmap,
 897        .set_voltage_time_sel   = regulator_set_voltage_time_sel,
 898        .set_suspend_disable    = s2mps14_regulator_set_suspend_disable,
 899};
 900
 901static const struct regulator_ops s2mpu02_buck_ops = {
 902        .list_voltage           = regulator_list_voltage_linear,
 903        .map_voltage            = regulator_map_voltage_linear,
 904        .is_enabled             = regulator_is_enabled_regmap,
 905        .enable                 = s2mps14_regulator_enable,
 906        .disable                = regulator_disable_regmap,
 907        .get_voltage_sel        = regulator_get_voltage_sel_regmap,
 908        .set_voltage_sel        = regulator_set_voltage_sel_regmap,
 909        .set_voltage_time_sel   = regulator_set_voltage_time_sel,
 910        .set_suspend_disable    = s2mps14_regulator_set_suspend_disable,
 911        .set_ramp_delay         = s2mpu02_set_ramp_delay,
 912};
 913
 914#define regulator_desc_s2mpu02_ldo1(num) {              \
 915        .name           = "LDO"#num,                    \
 916        .id             = S2MPU02_LDO##num,             \
 917        .ops            = &s2mpu02_ldo_ops,             \
 918        .type           = REGULATOR_VOLTAGE,            \
 919        .owner          = THIS_MODULE,                  \
 920        .min_uV         = S2MPU02_LDO_MIN_900MV,        \
 921        .uV_step        = S2MPU02_LDO_STEP_12_5MV,      \
 922        .linear_min_sel = S2MPU02_LDO_GROUP1_START_SEL, \
 923        .n_voltages     = S2MPU02_LDO_N_VOLTAGES,       \
 924        .vsel_reg       = S2MPU02_REG_L1CTRL,           \
 925        .vsel_mask      = S2MPU02_LDO_VSEL_MASK,        \
 926        .enable_reg     = S2MPU02_REG_L1CTRL,           \
 927        .enable_mask    = S2MPU02_ENABLE_MASK           \
 928}
 929#define regulator_desc_s2mpu02_ldo2(num) {              \
 930        .name           = "LDO"#num,                    \
 931        .id             = S2MPU02_LDO##num,             \
 932        .ops            = &s2mpu02_ldo_ops,             \
 933        .type           = REGULATOR_VOLTAGE,            \
 934        .owner          = THIS_MODULE,                  \
 935        .min_uV         = S2MPU02_LDO_MIN_1050MV,       \
 936        .uV_step        = S2MPU02_LDO_STEP_25MV,        \
 937        .linear_min_sel = S2MPU02_LDO_GROUP2_START_SEL, \
 938        .n_voltages     = S2MPU02_LDO_N_VOLTAGES,       \
 939        .vsel_reg       = S2MPU02_REG_L2CTRL1,          \
 940        .vsel_mask      = S2MPU02_LDO_VSEL_MASK,        \
 941        .enable_reg     = S2MPU02_REG_L2CTRL1,          \
 942        .enable_mask    = S2MPU02_ENABLE_MASK           \
 943}
 944#define regulator_desc_s2mpu02_ldo3(num) {              \
 945        .name           = "LDO"#num,                    \
 946        .id             = S2MPU02_LDO##num,             \
 947        .ops            = &s2mpu02_ldo_ops,             \
 948        .type           = REGULATOR_VOLTAGE,            \
 949        .owner          = THIS_MODULE,                  \
 950        .min_uV         = S2MPU02_LDO_MIN_900MV,        \
 951        .uV_step        = S2MPU02_LDO_STEP_12_5MV,      \
 952        .linear_min_sel = S2MPU02_LDO_GROUP1_START_SEL, \
 953        .n_voltages     = S2MPU02_LDO_N_VOLTAGES,       \
 954        .vsel_reg       = S2MPU02_REG_L3CTRL + num - 3, \
 955        .vsel_mask      = S2MPU02_LDO_VSEL_MASK,        \
 956        .enable_reg     = S2MPU02_REG_L3CTRL + num - 3, \
 957        .enable_mask    = S2MPU02_ENABLE_MASK           \
 958}
 959#define regulator_desc_s2mpu02_ldo4(num) {              \
 960        .name           = "LDO"#num,                    \
 961        .id             = S2MPU02_LDO##num,             \
 962        .ops            = &s2mpu02_ldo_ops,             \
 963        .type           = REGULATOR_VOLTAGE,            \
 964        .owner          = THIS_MODULE,                  \
 965        .min_uV         = S2MPU02_LDO_MIN_1050MV,       \
 966        .uV_step        = S2MPU02_LDO_STEP_25MV,        \
 967        .linear_min_sel = S2MPU02_LDO_GROUP2_START_SEL, \
 968        .n_voltages     = S2MPU02_LDO_N_VOLTAGES,       \
 969        .vsel_reg       = S2MPU02_REG_L3CTRL + num - 3, \
 970        .vsel_mask      = S2MPU02_LDO_VSEL_MASK,        \
 971        .enable_reg     = S2MPU02_REG_L3CTRL + num - 3, \
 972        .enable_mask    = S2MPU02_ENABLE_MASK           \
 973}
 974#define regulator_desc_s2mpu02_ldo5(num) {              \
 975        .name           = "LDO"#num,                    \
 976        .id             = S2MPU02_LDO##num,             \
 977        .ops            = &s2mpu02_ldo_ops,             \
 978        .type           = REGULATOR_VOLTAGE,            \
 979        .owner          = THIS_MODULE,                  \
 980        .min_uV         = S2MPU02_LDO_MIN_1600MV,       \
 981        .uV_step        = S2MPU02_LDO_STEP_50MV,        \
 982        .linear_min_sel = S2MPU02_LDO_GROUP3_START_SEL, \
 983        .n_voltages     = S2MPU02_LDO_N_VOLTAGES,       \
 984        .vsel_reg       = S2MPU02_REG_L3CTRL + num - 3, \
 985        .vsel_mask      = S2MPU02_LDO_VSEL_MASK,        \
 986        .enable_reg     = S2MPU02_REG_L3CTRL + num - 3, \
 987        .enable_mask    = S2MPU02_ENABLE_MASK           \
 988}
 989
 990#define regulator_desc_s2mpu02_buck1234(num) {                  \
 991        .name           = "BUCK"#num,                           \
 992        .id             = S2MPU02_BUCK##num,                    \
 993        .ops            = &s2mpu02_buck_ops,                    \
 994        .type           = REGULATOR_VOLTAGE,                    \
 995        .owner          = THIS_MODULE,                          \
 996        .min_uV         = S2MPU02_BUCK1234_MIN_600MV,           \
 997        .uV_step        = S2MPU02_BUCK1234_STEP_6_25MV,         \
 998        .n_voltages     = S2MPU02_BUCK_N_VOLTAGES,              \
 999        .linear_min_sel = S2MPU02_BUCK1234_START_SEL,           \
1000        .ramp_delay     = S2MPU02_BUCK_RAMP_DELAY,              \
1001        .vsel_reg       = S2MPU02_REG_B1CTRL2 + (num - 1) * 2,  \
1002        .vsel_mask      = S2MPU02_BUCK_VSEL_MASK,               \
1003        .enable_reg     = S2MPU02_REG_B1CTRL1 + (num - 1) * 2,  \
1004        .enable_mask    = S2MPU02_ENABLE_MASK                   \
1005}
1006#define regulator_desc_s2mpu02_buck5(num) {                     \
1007        .name           = "BUCK"#num,                           \
1008        .id             = S2MPU02_BUCK##num,                    \
1009        .ops            = &s2mpu02_ldo_ops,                     \
1010        .type           = REGULATOR_VOLTAGE,                    \
1011        .owner          = THIS_MODULE,                          \
1012        .min_uV         = S2MPU02_BUCK5_MIN_1081_25MV,          \
1013        .uV_step        = S2MPU02_BUCK5_STEP_6_25MV,            \
1014        .n_voltages     = S2MPU02_BUCK_N_VOLTAGES,              \
1015        .linear_min_sel = S2MPU02_BUCK5_START_SEL,              \
1016        .ramp_delay     = S2MPU02_BUCK_RAMP_DELAY,              \
1017        .vsel_reg       = S2MPU02_REG_B5CTRL2,                  \
1018        .vsel_mask      = S2MPU02_BUCK_VSEL_MASK,               \
1019        .enable_reg     = S2MPU02_REG_B5CTRL1,                  \
1020        .enable_mask    = S2MPU02_ENABLE_MASK                   \
1021}
1022#define regulator_desc_s2mpu02_buck6(num) {                     \
1023        .name           = "BUCK"#num,                           \
1024        .id             = S2MPU02_BUCK##num,                    \
1025        .ops            = &s2mpu02_ldo_ops,                     \
1026        .type           = REGULATOR_VOLTAGE,                    \
1027        .owner          = THIS_MODULE,                          \
1028        .min_uV         = S2MPU02_BUCK6_MIN_1700MV,             \
1029        .uV_step        = S2MPU02_BUCK6_STEP_2_50MV,            \
1030        .n_voltages     = S2MPU02_BUCK_N_VOLTAGES,              \
1031        .linear_min_sel = S2MPU02_BUCK6_START_SEL,              \
1032        .ramp_delay     = S2MPU02_BUCK_RAMP_DELAY,              \
1033        .vsel_reg       = S2MPU02_REG_B6CTRL2,                  \
1034        .vsel_mask      = S2MPU02_BUCK_VSEL_MASK,               \
1035        .enable_reg     = S2MPU02_REG_B6CTRL1,                  \
1036        .enable_mask    = S2MPU02_ENABLE_MASK                   \
1037}
1038#define regulator_desc_s2mpu02_buck7(num) {                     \
1039        .name           = "BUCK"#num,                           \
1040        .id             = S2MPU02_BUCK##num,                    \
1041        .ops            = &s2mpu02_ldo_ops,                     \
1042        .type           = REGULATOR_VOLTAGE,                    \
1043        .owner          = THIS_MODULE,                          \
1044        .min_uV         = S2MPU02_BUCK7_MIN_900MV,              \
1045        .uV_step        = S2MPU02_BUCK7_STEP_6_25MV,            \
1046        .n_voltages     = S2MPU02_BUCK_N_VOLTAGES,              \
1047        .linear_min_sel = S2MPU02_BUCK7_START_SEL,              \
1048        .ramp_delay     = S2MPU02_BUCK_RAMP_DELAY,              \
1049        .vsel_reg       = S2MPU02_REG_B7CTRL2,                  \
1050        .vsel_mask      = S2MPU02_BUCK_VSEL_MASK,               \
1051        .enable_reg     = S2MPU02_REG_B7CTRL1,                  \
1052        .enable_mask    = S2MPU02_ENABLE_MASK                   \
1053}
1054
1055static const struct regulator_desc s2mpu02_regulators[] = {
1056        regulator_desc_s2mpu02_ldo1(1),
1057        regulator_desc_s2mpu02_ldo2(2),
1058        regulator_desc_s2mpu02_ldo4(3),
1059        regulator_desc_s2mpu02_ldo5(4),
1060        regulator_desc_s2mpu02_ldo4(5),
1061        regulator_desc_s2mpu02_ldo3(6),
1062        regulator_desc_s2mpu02_ldo3(7),
1063        regulator_desc_s2mpu02_ldo4(8),
1064        regulator_desc_s2mpu02_ldo5(9),
1065        regulator_desc_s2mpu02_ldo3(10),
1066        regulator_desc_s2mpu02_ldo4(11),
1067        regulator_desc_s2mpu02_ldo5(12),
1068        regulator_desc_s2mpu02_ldo5(13),
1069        regulator_desc_s2mpu02_ldo5(14),
1070        regulator_desc_s2mpu02_ldo5(15),
1071        regulator_desc_s2mpu02_ldo5(16),
1072        regulator_desc_s2mpu02_ldo4(17),
1073        regulator_desc_s2mpu02_ldo5(18),
1074        regulator_desc_s2mpu02_ldo3(19),
1075        regulator_desc_s2mpu02_ldo4(20),
1076        regulator_desc_s2mpu02_ldo5(21),
1077        regulator_desc_s2mpu02_ldo5(22),
1078        regulator_desc_s2mpu02_ldo5(23),
1079        regulator_desc_s2mpu02_ldo4(24),
1080        regulator_desc_s2mpu02_ldo5(25),
1081        regulator_desc_s2mpu02_ldo4(26),
1082        regulator_desc_s2mpu02_ldo5(27),
1083        regulator_desc_s2mpu02_ldo5(28),
1084        regulator_desc_s2mpu02_buck1234(1),
1085        regulator_desc_s2mpu02_buck1234(2),
1086        regulator_desc_s2mpu02_buck1234(3),
1087        regulator_desc_s2mpu02_buck1234(4),
1088        regulator_desc_s2mpu02_buck5(5),
1089        regulator_desc_s2mpu02_buck6(6),
1090        regulator_desc_s2mpu02_buck7(7),
1091};
1092
1093static int s2mps11_pmic_probe(struct platform_device *pdev)
1094{
1095        struct sec_pmic_dev *iodev = dev_get_drvdata(pdev->dev.parent);
1096        struct sec_platform_data *pdata = NULL;
1097        struct of_regulator_match *rdata = NULL;
1098        struct regulator_config config = { };
1099        struct s2mps11_info *s2mps11;
1100        unsigned int rdev_num = 0;
1101        int i, ret = 0;
1102        const struct regulator_desc *regulators;
1103
1104        s2mps11 = devm_kzalloc(&pdev->dev, sizeof(struct s2mps11_info),
1105                                GFP_KERNEL);
1106        if (!s2mps11)
1107                return -ENOMEM;
1108
1109        s2mps11->dev_type = platform_get_device_id(pdev)->driver_data;
1110        switch (s2mps11->dev_type) {
1111        case S2MPS11X:
1112                rdev_num = ARRAY_SIZE(s2mps11_regulators);
1113                regulators = s2mps11_regulators;
1114                BUILD_BUG_ON(S2MPS_REGULATOR_MAX < ARRAY_SIZE(s2mps11_regulators));
1115                break;
1116        case S2MPS13X:
1117                rdev_num = ARRAY_SIZE(s2mps13_regulators);
1118                regulators = s2mps13_regulators;
1119                BUILD_BUG_ON(S2MPS_REGULATOR_MAX < ARRAY_SIZE(s2mps13_regulators));
1120                break;
1121        case S2MPS14X:
1122                rdev_num = ARRAY_SIZE(s2mps14_regulators);
1123                regulators = s2mps14_regulators;
1124                BUILD_BUG_ON(S2MPS_REGULATOR_MAX < ARRAY_SIZE(s2mps14_regulators));
1125                break;
1126        case S2MPS15X:
1127                rdev_num = ARRAY_SIZE(s2mps15_regulators);
1128                regulators = s2mps15_regulators;
1129                BUILD_BUG_ON(S2MPS_REGULATOR_MAX < ARRAY_SIZE(s2mps15_regulators));
1130                break;
1131        case S2MPU02:
1132                rdev_num = ARRAY_SIZE(s2mpu02_regulators);
1133                regulators = s2mpu02_regulators;
1134                BUILD_BUG_ON(S2MPS_REGULATOR_MAX < ARRAY_SIZE(s2mpu02_regulators));
1135                break;
1136        default:
1137                dev_err(&pdev->dev, "Invalid device type: %u\n",
1138                                    s2mps11->dev_type);
1139                return -EINVAL;
1140        }
1141
1142        s2mps11->ext_control_gpio = devm_kmalloc_array(&pdev->dev,
1143                        rdev_num, sizeof(*s2mps11->ext_control_gpio),
1144                        GFP_KERNEL);
1145        if (!s2mps11->ext_control_gpio)
1146                return -ENOMEM;
1147        /*
1148         * 0 is a valid GPIO so initialize all GPIO-s to negative value
1149         * to indicate that external control won't be used for this regulator.
1150         */
1151        for (i = 0; i < rdev_num; i++)
1152                s2mps11->ext_control_gpio[i] = -EINVAL;
1153
1154        if (!iodev->dev->of_node) {
1155                if (iodev->pdata) {
1156                        pdata = iodev->pdata;
1157                        goto common_reg;
1158                } else {
1159                        dev_err(pdev->dev.parent,
1160                                "Platform data or DT node not supplied\n");
1161                        return -ENODEV;
1162                }
1163        }
1164
1165        rdata = kcalloc(rdev_num, sizeof(*rdata), GFP_KERNEL);
1166        if (!rdata)
1167                return -ENOMEM;
1168
1169        for (i = 0; i < rdev_num; i++)
1170                rdata[i].name = regulators[i].name;
1171
1172        ret = s2mps11_pmic_dt_parse(pdev, rdata, s2mps11, rdev_num);
1173        if (ret)
1174                goto out;
1175
1176common_reg:
1177        platform_set_drvdata(pdev, s2mps11);
1178
1179        config.dev = &pdev->dev;
1180        config.regmap = iodev->regmap_pmic;
1181        config.driver_data = s2mps11;
1182        config.ena_gpio_flags = GPIOF_OUT_INIT_HIGH;
1183        config.ena_gpio_initialized = true;
1184        for (i = 0; i < rdev_num; i++) {
1185                struct regulator_dev *regulator;
1186
1187                if (pdata) {
1188                        config.init_data = pdata->regulators[i].initdata;
1189                        config.of_node = pdata->regulators[i].reg_node;
1190                } else {
1191                        config.init_data = rdata[i].init_data;
1192                        config.of_node = rdata[i].of_node;
1193                }
1194                config.ena_gpio = s2mps11->ext_control_gpio[i];
1195
1196                regulator = devm_regulator_register(&pdev->dev,
1197                                                &regulators[i], &config);
1198                if (IS_ERR(regulator)) {
1199                        ret = PTR_ERR(regulator);
1200                        dev_err(&pdev->dev, "regulator init failed for %d\n",
1201                                i);
1202                        goto out;
1203                }
1204
1205                if (gpio_is_valid(s2mps11->ext_control_gpio[i])) {
1206                        ret = s2mps14_pmic_enable_ext_control(s2mps11,
1207                                        regulator);
1208                        if (ret < 0) {
1209                                dev_err(&pdev->dev,
1210                                                "failed to enable GPIO control over %s: %d\n",
1211                                                regulator->desc->name, ret);
1212                                goto out;
1213                        }
1214                }
1215        }
1216
1217out:
1218        kfree(rdata);
1219
1220        return ret;
1221}
1222
1223static const struct platform_device_id s2mps11_pmic_id[] = {
1224        { "s2mps11-regulator", S2MPS11X},
1225        { "s2mps13-regulator", S2MPS13X},
1226        { "s2mps14-regulator", S2MPS14X},
1227        { "s2mps15-regulator", S2MPS15X},
1228        { "s2mpu02-regulator", S2MPU02},
1229        { },
1230};
1231MODULE_DEVICE_TABLE(platform, s2mps11_pmic_id);
1232
1233static struct platform_driver s2mps11_pmic_driver = {
1234        .driver = {
1235                .name = "s2mps11-pmic",
1236        },
1237        .probe = s2mps11_pmic_probe,
1238        .id_table = s2mps11_pmic_id,
1239};
1240
1241module_platform_driver(s2mps11_pmic_driver);
1242
1243/* Module information */
1244MODULE_AUTHOR("Sangbeom Kim <sbkim73@samsung.com>");
1245MODULE_DESCRIPTION("SAMSUNG S2MPS11/S2MPS14/S2MPS15/S2MPU02 Regulator Driver");
1246MODULE_LICENSE("GPL");
1247