/*
 * AD7190 AD7192 AD7193 AD7195 SPI ADC driver
 *
 * Copyright 2011-2015 Analog Devices Inc.
 *
 * Licensed under the GPL-2.
 */

#include <linux/interrupt.h>
#include <linux/device.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/sysfs.h>
#include <linux/spi/spi.h>
#include <linux/regulator/consumer.h>
#include <linux/err.h>
#include <linux/sched.h>
#include <linux/delay.h>

#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>
#include <linux/iio/buffer.h>
#include <linux/iio/trigger.h>
#include <linux/iio/trigger_consumer.h>
#include <linux/iio/triggered_buffer.h>
#include <linux/iio/adc/ad_sigma_delta.h>

#include "ad7192.h"

/* Registers */
#define AD7192_REG_COMM         0 /* Communications Register (WO, 8-bit) */
#define AD7192_REG_STAT         0 /* Status Register         (RO, 8-bit) */
#define AD7192_REG_MODE         1 /* Mode Register           (RW, 24-bit */
#define AD7192_REG_CONF         2 /* Configuration Register  (RW, 24-bit) */
#define AD7192_REG_DATA         3 /* Data Register           (RO, 24/32-bit) */
#define AD7192_REG_ID           4 /* ID Register             (RO, 8-bit) */
#define AD7192_REG_GPOCON       5 /* GPOCON Register         (RO, 8-bit) */
#define AD7192_REG_OFFSET       6 /* Offset Register         (RW, 16-bit */
                                  /* (AD7792)/24-bit (AD7192)) */
#define AD7192_REG_FULLSALE     7 /* Full-Scale Register */
                                  /* (RW, 16-bit (AD7792)/24-bit (AD7192)) */

/* Communications Register Bit Designations (AD7192_REG_COMM) */
#define AD7192_COMM_WEN         BIT(7) /* Write Enable */
#define AD7192_COMM_WRITE       0 /* Write Operation */
#define AD7192_COMM_READ        BIT(6) /* Read Operation */
#define AD7192_COMM_ADDR(x)     (((x) & 0x7) << 3) /* Register Address */
#define AD7192_COMM_CREAD       BIT(2) /* Continuous Read of Data Register */

/* Status Register Bit Designations (AD7192_REG_STAT) */
#define AD7192_STAT_RDY         BIT(7) /* Ready */
#define AD7192_STAT_ERR         BIT(6) /* Error (Overrange, Underrange) */
#define AD7192_STAT_NOREF       BIT(5) /* Error no external reference */
#define AD7192_STAT_PARITY      BIT(4) /* Parity */
#define AD7192_STAT_CH3         BIT(2) /* Channel 3 */
#define AD7192_STAT_CH2         BIT(1) /* Channel 2 */
#define AD7192_STAT_CH1         BIT(0) /* Channel 1 */

/* Mode Register Bit Designations (AD7192_REG_MODE) */
#define AD7192_MODE_SEL(x)      (((x) & 0x7) << 21) /* Operation Mode Select */
#define AD7192_MODE_SEL_MASK    (0x7 << 21) /* Operation Mode Select Mask */
#define AD7192_MODE_DAT_STA     BIT(20) /* Status Register transmission */
#define AD7192_MODE_CLKSRC(x)   (((x) & 0x3) << 18) /* Clock Source Select */
#define AD7192_MODE_SINC3       BIT(15) /* SINC3 Filter Select */
#define AD7192_MODE_ACX         BIT(14) /* AC excitation enable(AD7195 only)*/
#define AD7192_MODE_ENPAR       BIT(13) /* Parity Enable */
#define AD7192_MODE_CLKDIV      BIT(12) /* Clock divide by 2 (AD7190/2 only)*/
#define AD7192_MODE_SCYCLE      BIT(11) /* Single cycle conversion */
#define AD7192_MODE_REJ60       BIT(10) /* 50/60Hz notch filter */
#define AD7192_MODE_RATE(x)     ((x) & 0x3FF) /* Filter Update Rate Select */

/* Mode Register: AD7192_MODE_SEL options */
#define AD7192_MODE_CONT                0 /* Continuous Conversion Mode */
#define AD7192_MODE_SINGLE              1 /* Single Conversion Mode */
#define AD7192_MODE_IDLE                2 /* Idle Mode */
#define AD7192_MODE_PWRDN               3 /* Power-Down Mode */
#define AD7192_MODE_CAL_INT_ZERO        4 /* Internal Zero-Scale Calibration */
#define AD7192_MODE_CAL_INT_FULL        5 /* Internal Full-Scale Calibration */
#define AD7192_MODE_CAL_SYS_ZERO        6 /* System Zero-Scale Calibration */
#define AD7192_MODE_CAL_SYS_FULL        7 /* System Full-Scale Calibration */

/* Mode Register: AD7192_MODE_CLKSRC options */
#define AD7192_CLK_EXT_MCLK1_2          0 /* External 4.92 MHz Clock connected*/
                                          /* from MCLK1 to MCLK2 */
#define AD7192_CLK_EXT_MCLK2            1 /* External Clock applied to MCLK2 */
#define AD7192_CLK_INT                  2 /* Internal 4.92 MHz Clock not */
                                          /* available at the MCLK2 pin */
#define AD7192_CLK_INT_CO               3 /* Internal 4.92 MHz Clock available*/
                                          /* at the MCLK2 pin */

/* Configuration Register Bit Designations (AD7192_REG_CONF) */

#define AD7192_CONF_CHOP        BIT(23) /* CHOP enable */
#define AD7192_CONF_REFSEL      BIT(20) /* REFIN1/REFIN2 Reference Select */
#define AD7192_CONF_CHAN(x)     ((x) << 8) /* Channel select */
#define AD7192_CONF_CHAN_MASK   (0x7FF << 8) /* Channel select mask */
#define AD7192_CONF_BURN        BIT(7) /* Burnout current enable */
#define AD7192_CONF_REFDET      BIT(6) /* Reference detect enable */
#define AD7192_CONF_BUF         BIT(4) /* Buffered Mode Enable */
#define AD7192_CONF_UNIPOLAR    BIT(3) /* Unipolar/Bipolar Enable */
#define AD7192_CONF_GAIN(x)     ((x) & 0x7) /* Gain Select */

#define AD7192_CH_AIN1P_AIN2M   BIT(0) /* AIN1(+) - AIN2(-) */
#define AD7192_CH_AIN3P_AIN4M   BIT(1) /* AIN3(+) - AIN4(-) */
#define AD7192_CH_TEMP          BIT(2) /* Temp Sensor */
#define AD7192_CH_AIN2P_AIN2M   BIT(3) /* AIN2(+) - AIN2(-) */
#define AD7192_CH_AIN1          BIT(4) /* AIN1 - AINCOM */
#define AD7192_CH_AIN2          BIT(5) /* AIN2 - AINCOM */
#define AD7192_CH_AIN3          BIT(6) /* AIN3 - AINCOM */
#define AD7192_CH_AIN4          BIT(7) /* AIN4 - AINCOM */

#define AD7193_CH_AIN1P_AIN2M   0x000  /* AIN1(+) - AIN2(-) */
#define AD7193_CH_AIN3P_AIN4M   0x001  /* AIN3(+) - AIN4(-) */
#define AD7193_CH_AIN5P_AIN6M   0x002  /* AIN5(+) - AIN6(-) */
#define AD7193_CH_AIN7P_AIN8M   0x004  /* AIN7(+) - AIN8(-) */
#define AD7193_CH_TEMP          0x100 /* Temp senseor */
#define AD7193_CH_AIN2P_AIN2M   0x200 /* AIN2(+) - AIN2(-) */
#define AD7193_CH_AIN1          0x401 /* AIN1 - AINCOM */
#define AD7193_CH_AIN2          0x402 /* AIN2 - AINCOM */
#define AD7193_CH_AIN3          0x404 /* AIN3 - AINCOM */
#define AD7193_CH_AIN4          0x408 /* AIN4 - AINCOM */
#define AD7193_CH_AIN5          0x410 /* AIN5 - AINCOM */
#define AD7193_CH_AIN6          0x420 /* AIN6 - AINCOM */
#define AD7193_CH_AIN7          0x440 /* AIN7 - AINCOM */
#define AD7193_CH_AIN8          0x480 /* AIN7 - AINCOM */
#define AD7193_CH_AINCOM        0x600 /* AINCOM - AINCOM */

/* ID Register Bit Designations (AD7192_REG_ID) */
#define ID_AD7190               0x4
#define ID_AD7192               0x0
#define ID_AD7193               0x2
#define ID_AD7195               0x6
#define AD7192_ID_MASK          0x0F

/* GPOCON Register Bit Designations (AD7192_REG_GPOCON) */
#define AD7192_GPOCON_BPDSW     BIT(6) /* Bridge power-down switch enable */
#define AD7192_GPOCON_GP32EN    BIT(5) /* Digital Output P3 and P2 enable */
#define AD7192_GPOCON_GP10EN    BIT(4) /* Digital Output P1 and P0 enable */
#define AD7192_GPOCON_P3DAT     BIT(3) /* P3 state */
#define AD7192_GPOCON_P2DAT     BIT(2) /* P2 state */
#define AD7192_GPOCON_P1DAT     BIT(1) /* P1 state */
#define AD7192_GPOCON_P0DAT     BIT(0) /* P0 state */

#define AD7192_EXT_FREQ_MHZ_MIN 2457600
#define AD7192_EXT_FREQ_MHZ_MAX 5120000
#define AD7192_INT_FREQ_MHZ     4915200

/* NOTE:
 * The AD7190/2/5 features a dual use data out ready DOUT/RDY output.
 * In order to avoid contentions on the SPI bus, it's therefore necessary
 * to use spi bus locking.
 *
 * The DOUT/RDY output must also be wired to an interrupt capable GPIO.
 */

struct ad7192_state {
        struct regulator                *avdd;
        struct regulator                *dvdd;
        u16                             int_vref_mv;
        u32                             mclk;
        u32                             f_order;
        u32                             mode;
        u32                             conf;
        u32                             scale_avail[8][2];
        u8                              gpocon;
        u8                              devid;
        struct mutex                    lock;   /* protect sensor state */

        struct ad_sigma_delta           sd;
};

static struct ad7192_state *ad_sigma_delta_to_ad7192(struct ad_sigma_delta *sd)
{
        return container_of(sd, struct ad7192_state, sd);
}

static int ad7192_set_channel(struct ad_sigma_delta *sd, unsigned int channel)
{
        struct ad7192_state *st = ad_sigma_delta_to_ad7192(sd);

        st->conf &= ~AD7192_CONF_CHAN_MASK;
        st->conf |= AD7192_CONF_CHAN(channel);

        return ad_sd_write_reg(&st->sd, AD7192_REG_CONF, 3, st->conf);
}

static int ad7192_set_mode(struct ad_sigma_delta *sd,
                           enum ad_sigma_delta_mode mode)
{
        struct ad7192_state *st = ad_sigma_delta_to_ad7192(sd);

        st->mode &= ~AD7192_MODE_SEL_MASK;
        st->mode |= AD7192_MODE_SEL(mode);

        return ad_sd_write_reg(&st->sd, AD7192_REG_MODE, 3, st->mode);
}

static const struct ad_sigma_delta_info ad7192_sigma_delta_info = {
        .set_channel = ad7192_set_channel,
        .set_mode = ad7192_set_mode,
        .has_registers = true,
        .addr_shift = 3,
        .read_mask = BIT(6),
};

static const struct ad_sd_calib_data ad7192_calib_arr[8] = {
        {AD7192_MODE_CAL_INT_ZERO, AD7192_CH_AIN1},
        {AD7192_MODE_CAL_INT_FULL, AD7192_CH_AIN1},
        {AD7192_MODE_CAL_INT_ZERO, AD7192_CH_AIN2},
        {AD7192_MODE_CAL_INT_FULL, AD7192_CH_AIN2},
        {AD7192_MODE_CAL_INT_ZERO, AD7192_CH_AIN3},
        {AD7192_MODE_CAL_INT_FULL, AD7192_CH_AIN3},
        {AD7192_MODE_CAL_INT_ZERO, AD7192_CH_AIN4},
        {AD7192_MODE_CAL_INT_FULL, AD7192_CH_AIN4}
};

static int ad7192_calibrate_all(struct ad7192_state *st)
{
                return ad_sd_calibrate_all(&st->sd, ad7192_calib_arr,
                                ARRAY_SIZE(ad7192_calib_arr));
}

static inline bool ad7192_valid_external_frequency(u32 freq)
{
        return (freq >= AD7192_EXT_FREQ_MHZ_MIN &&
                freq <= AD7192_EXT_FREQ_MHZ_MAX);
}

static int ad7192_setup(struct ad7192_state *st,
                        const struct ad7192_platform_data *pdata)
{
        struct iio_dev *indio_dev = spi_get_drvdata(st->sd.spi);
        unsigned long long scale_uv;
        int i, ret, id;

        /* reset the serial interface */
        ret = ad_sd_reset(&st->sd, 48);
        if (ret < 0)
                goto out;
        usleep_range(500, 1000); /* Wait for at least 500us */

        /* write/read test for device presence */
        ret = ad_sd_read_reg(&st->sd, AD7192_REG_ID, 1, &id);
        if (ret)
                goto out;

        id &= AD7192_ID_MASK;

        if (id != st->devid)
                dev_warn(&st->sd.spi->dev, "device ID query failed (0x%X)\n",
                         id);

        switch (pdata->clock_source_sel) {
        case AD7192_CLK_INT:
        case AD7192_CLK_INT_CO:
                st->mclk = AD7192_INT_FREQ_MHZ;
                break;
        case AD7192_CLK_EXT_MCLK1_2:
        case AD7192_CLK_EXT_MCLK2:
                if (ad7192_valid_external_frequency(pdata->ext_clk_hz)) {
                        st->mclk = pdata->ext_clk_hz;
                        break;
                }
                dev_err(&st->sd.spi->dev, "Invalid frequency setting %u\n",
                        pdata->ext_clk_hz);
                ret = -EINVAL;
                goto out;
        default:
                ret = -EINVAL;
                goto out;
        }

        st->mode = AD7192_MODE_SEL(AD7192_MODE_IDLE) |
                AD7192_MODE_CLKSRC(pdata->clock_source_sel) |
                AD7192_MODE_RATE(480);

        st->conf = AD7192_CONF_GAIN(0);

        if (pdata->rej60_en)
                st->mode |= AD7192_MODE_REJ60;

        if (pdata->sinc3_en)
                st->mode |= AD7192_MODE_SINC3;

        if (pdata->refin2_en && st->devid != ID_AD7195)
                st->conf |= AD7192_CONF_REFSEL;

        if (pdata->chop_en) {
                st->conf |= AD7192_CONF_CHOP;
                if (pdata->sinc3_en)
                        st->f_order = 3; /* SINC 3rd order */
                else
                        st->f_order = 4; /* SINC 4th order */
        } else {
                st->f_order = 1;
        }

        if (pdata->buf_en)
                st->conf |= AD7192_CONF_BUF;

        if (pdata->unipolar_en)
                st->conf |= AD7192_CONF_UNIPOLAR;

        if (pdata->burnout_curr_en && pdata->buf_en && !pdata->chop_en) {
                st->conf |= AD7192_CONF_BURN;
        } else if (pdata->burnout_curr_en) {
                dev_warn(&st->sd.spi->dev,
                         "Can't enable burnout currents: see CHOP or buffer\n");
        }

        ret = ad_sd_write_reg(&st->sd, AD7192_REG_MODE, 3, st->mode);
        if (ret)
                goto out;

        ret = ad_sd_write_reg(&st->sd, AD7192_REG_CONF, 3, st->conf);
        if (ret)
                goto out;

        ret = ad7192_calibrate_all(st);
        if (ret)
                goto out;

        /* Populate available ADC input ranges */
        for (i = 0; i < ARRAY_SIZE(st->scale_avail); i++) {
                scale_uv = ((u64)st->int_vref_mv * 100000000)
                        >> (indio_dev->channels[0].scan_type.realbits -
                        ((st->conf & AD7192_CONF_UNIPOLAR) ? 0 : 1));
                scale_uv >>= i;

                st->scale_avail[i][1] = do_div(scale_uv, 100000000) * 10;
                st->scale_avail[i][0] = scale_uv;
        }

        return 0;
out:
        dev_err(&st->sd.spi->dev, "setup failed\n");
        return ret;
}

static ssize_t
ad7192_show_scale_available(struct device *dev,
                            struct device_attribute *attr, char *buf)
{
        struct iio_dev *indio_dev = dev_to_iio_dev(dev);
        struct ad7192_state *st = iio_priv(indio_dev);
        int i, len = 0;

        for (i = 0; i < ARRAY_SIZE(st->scale_avail); i++)
                len += sprintf(buf + len, "%d.%09u ", st->scale_avail[i][0],
                               st->scale_avail[i][1]);

        len += sprintf(buf + len, "\n");

        return len;
}

static IIO_DEVICE_ATTR_NAMED(in_v_m_v_scale_available,
                             in_voltage-voltage_scale_available,
                             0444, ad7192_show_scale_available, NULL, 0);

static IIO_DEVICE_ATTR(in_voltage_scale_available, 0444,
                       ad7192_show_scale_available, NULL, 0);

static ssize_t ad7192_show_ac_excitation(struct device *dev,
                                         struct device_attribute *attr,
                                         char *buf)
{
        struct iio_dev *indio_dev = dev_to_iio_dev(dev);
        struct ad7192_state *st = iio_priv(indio_dev);

        return sprintf(buf, "%d\n", !!(st->mode & AD7192_MODE_ACX));
}

static ssize_t ad7192_show_bridge_switch(struct device *dev,
                                         struct device_attribute *attr,
                                         char *buf)
{
        struct iio_dev *indio_dev = dev_to_iio_dev(dev);
        struct ad7192_state *st = iio_priv(indio_dev);

        return sprintf(buf, "%d\n", !!(st->gpocon & AD7192_GPOCON_BPDSW));
}

static ssize_t ad7192_set(struct device *dev,
                          struct device_attribute *attr,
                          const char *buf,
                          size_t len)
{
        struct iio_dev *indio_dev = dev_to_iio_dev(dev);
        struct ad7192_state *st = iio_priv(indio_dev);
        struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
        int ret;
        bool val;

        ret = strtobool(buf, &val);
        if (ret < 0)
                return ret;

        ret = iio_device_claim_direct_mode(indio_dev);
        if (ret)
                return ret;

        switch ((u32)this_attr->address) {
        case AD7192_REG_GPOCON:
                if (val)
                        st->gpocon |= AD7192_GPOCON_BPDSW;
                else
                        st->gpocon &= ~AD7192_GPOCON_BPDSW;

                ad_sd_write_reg(&st->sd, AD7192_REG_GPOCON, 1, st->gpocon);
                break;
        case AD7192_REG_MODE:
                if (val)
                        st->mode |= AD7192_MODE_ACX;
                else
                        st->mode &= ~AD7192_MODE_ACX;

                ad_sd_write_reg(&st->sd, AD7192_REG_MODE, 3, st->mode);
                break;
        default:
                ret = -EINVAL;
        }

        iio_device_release_direct_mode(indio_dev);

        return ret ? ret : len;
}

static IIO_DEVICE_ATTR(bridge_switch_en, 0644,
                       ad7192_show_bridge_switch, ad7192_set,
                       AD7192_REG_GPOCON);

static IIO_DEVICE_ATTR(ac_excitation_en, 0644,
                       ad7192_show_ac_excitation, ad7192_set,
                       AD7192_REG_MODE);

static struct attribute *ad7192_attributes[] = {
        &iio_dev_attr_in_v_m_v_scale_available.dev_attr.attr,
        &iio_dev_attr_in_voltage_scale_available.dev_attr.attr,
        &iio_dev_attr_bridge_switch_en.dev_attr.attr,
        &iio_dev_attr_ac_excitation_en.dev_attr.attr,
        NULL
};

static const struct attribute_group ad7192_attribute_group = {
        .attrs = ad7192_attributes,
};

static struct attribute *ad7195_attributes[] = {
        &iio_dev_attr_in_v_m_v_scale_available.dev_attr.attr,
        &iio_dev_attr_in_voltage_scale_available.dev_attr.attr,
        &iio_dev_attr_bridge_switch_en.dev_attr.attr,
        NULL
};

static const struct attribute_group ad7195_attribute_group = {
        .attrs = ad7195_attributes,
};

static unsigned int ad7192_get_temp_scale(bool unipolar)
{
        return unipolar ? 2815 * 2 : 2815;
}

static int ad7192_read_raw(struct iio_dev *indio_dev,
                           struct iio_chan_spec const *chan,
                           int *val,
                           int *val2,
                           long m)
{
        struct ad7192_state *st = iio_priv(indio_dev);
        bool unipolar = !!(st->conf & AD7192_CONF_UNIPOLAR);

        switch (m) {
        case IIO_CHAN_INFO_RAW:
                return ad_sigma_delta_single_conversion(indio_dev, chan, val);
        case IIO_CHAN_INFO_SCALE:
                switch (chan->type) {
                case IIO_VOLTAGE:
                        mutex_lock(&st->lock);
                        *val = st->scale_avail[AD7192_CONF_GAIN(st->conf)][0];
                        *val2 = st->scale_avail[AD7192_CONF_GAIN(st->conf)][1];
                        mutex_unlock(&st->lock);
                        return IIO_VAL_INT_PLUS_NANO;
                case IIO_TEMP:
                        *val = 0;
                        *val2 = 1000000000 / ad7192_get_temp_scale(unipolar);
                        return IIO_VAL_INT_PLUS_NANO;
                default:
                        return -EINVAL;
                }
        case IIO_CHAN_INFO_OFFSET:
                if (!unipolar)
                        *val = -(1 << (chan->scan_type.realbits - 1));
                else
                        *val = 0;
                /* Kelvin to Celsius */
                if (chan->type == IIO_TEMP)
                        *val -= 273 * ad7192_get_temp_scale(unipolar);
                return IIO_VAL_INT;
        case IIO_CHAN_INFO_SAMP_FREQ:
                *val = st->mclk /
                        (st->f_order * 1024 * AD7192_MODE_RATE(st->mode));
                return IIO_VAL_INT;
        }

        return -EINVAL;
}

static int ad7192_write_raw(struct iio_dev *indio_dev,
                            struct iio_chan_spec const *chan,
                            int val,
                            int val2,
                            long mask)
{
        struct ad7192_state *st = iio_priv(indio_dev);
        int ret, i, div;
        unsigned int tmp;

        ret = iio_device_claim_direct_mode(indio_dev);
        if (ret)
                return ret;

        switch (mask) {
        case IIO_CHAN_INFO_SCALE:
                ret = -EINVAL;
                mutex_lock(&st->lock);
                for (i = 0; i < ARRAY_SIZE(st->scale_avail); i++)
                        if (val2 == st->scale_avail[i][1]) {
                                ret = 0;
                                tmp = st->conf;
                                st->conf &= ~AD7192_CONF_GAIN(-1);
                                st->conf |= AD7192_CONF_GAIN(i);
                                if (tmp == st->conf)
                                        break;
                                ad_sd_write_reg(&st->sd, AD7192_REG_CONF,
                                                3, st->conf);
                                ad7192_calibrate_all(st);
                                break;
                        }
                mutex_unlock(&st->lock);
                break;
        case IIO_CHAN_INFO_SAMP_FREQ:
                if (!val) {
                        ret = -EINVAL;
                        break;
                }

                div = st->mclk / (val * st->f_order * 1024);
                if (div < 1 || div > 1023) {
                        ret = -EINVAL;
                        break;
                }

                st->mode &= ~AD7192_MODE_RATE(-1);
                st->mode |= AD7192_MODE_RATE(div);
                ad_sd_write_reg(&st->sd, AD7192_REG_MODE, 3, st->mode);
                break;
        default:
                ret = -EINVAL;
        }

        iio_device_release_direct_mode(indio_dev);

        return ret;
}

static int ad7192_write_raw_get_fmt(struct iio_dev *indio_dev,
                                    struct iio_chan_spec const *chan,
                                    long mask)
{
        switch (mask) {
        case IIO_CHAN_INFO_SCALE:
                return IIO_VAL_INT_PLUS_NANO;
        case IIO_CHAN_INFO_SAMP_FREQ:
                return IIO_VAL_INT;
        default:
                return -EINVAL;
        }
}

static const struct iio_info ad7192_info = {
        .read_raw = ad7192_read_raw,
        .write_raw = ad7192_write_raw,
        .write_raw_get_fmt = ad7192_write_raw_get_fmt,
        .attrs = &ad7192_attribute_group,
        .validate_trigger = ad_sd_validate_trigger,
};

static const struct iio_info ad7195_info = {
        .read_raw = ad7192_read_raw,
        .write_raw = ad7192_write_raw,
        .write_raw_get_fmt = ad7192_write_raw_get_fmt,
        .attrs = &ad7195_attribute_group,
        .validate_trigger = ad_sd_validate_trigger,
};

static const struct iio_chan_spec ad7192_channels[] = {
        AD_SD_DIFF_CHANNEL(0, 1, 2, AD7192_CH_AIN1P_AIN2M, 24, 32, 0),
        AD_SD_DIFF_CHANNEL(1, 3, 4, AD7192_CH_AIN3P_AIN4M, 24, 32, 0),
        AD_SD_TEMP_CHANNEL(2, AD7192_CH_TEMP, 24, 32, 0),
        AD_SD_SHORTED_CHANNEL(3, 2, AD7192_CH_AIN2P_AIN2M, 24, 32, 0),
        AD_SD_CHANNEL(4, 1, AD7192_CH_AIN1, 24, 32, 0),
        AD_SD_CHANNEL(5, 2, AD7192_CH_AIN2, 24, 32, 0),
        AD_SD_CHANNEL(6, 3, AD7192_CH_AIN3, 24, 32, 0),
        AD_SD_CHANNEL(7, 4, AD7192_CH_AIN4, 24, 32, 0),
        IIO_CHAN_SOFT_TIMESTAMP(8),
};

static const struct iio_chan_spec ad7193_channels[] = {
        AD_SD_DIFF_CHANNEL(0, 1, 2, AD7193_CH_AIN1P_AIN2M, 24, 32, 0),
        AD_SD_DIFF_CHANNEL(1, 3, 4, AD7193_CH_AIN3P_AIN4M, 24, 32, 0),
        AD_SD_DIFF_CHANNEL(2, 5, 6, AD7193_CH_AIN5P_AIN6M, 24, 32, 0),
        AD_SD_DIFF_CHANNEL(3, 7, 8, AD7193_CH_AIN7P_AIN8M, 24, 32, 0),
        AD_SD_TEMP_CHANNEL(4, AD7193_CH_TEMP, 24, 32, 0),
        AD_SD_SHORTED_CHANNEL(5, 2, AD7193_CH_AIN2P_AIN2M, 24, 32, 0),
        AD_SD_CHANNEL(6, 1, AD7193_CH_AIN1, 24, 32, 0),
        AD_SD_CHANNEL(7, 2, AD7193_CH_AIN2, 24, 32, 0),
        AD_SD_CHANNEL(8, 3, AD7193_CH_AIN3, 24, 32, 0),
        AD_SD_CHANNEL(9, 4, AD7193_CH_AIN4, 24, 32, 0),
        AD_SD_CHANNEL(10, 5, AD7193_CH_AIN5, 24, 32, 0),
        AD_SD_CHANNEL(11, 6, AD7193_CH_AIN6, 24, 32, 0),
        AD_SD_CHANNEL(12, 7, AD7193_CH_AIN7, 24, 32, 0),
        AD_SD_CHANNEL(13, 8, AD7193_CH_AIN8, 24, 32, 0),
        IIO_CHAN_SOFT_TIMESTAMP(14),
};

static int ad7192_probe(struct spi_device *spi)
{
        const struct ad7192_platform_data *pdata = dev_get_platdata(&spi->dev);
        struct ad7192_state *st;
        struct iio_dev *indio_dev;
        int ret, voltage_uv = 0;

        if (!pdata) {
                dev_err(&spi->dev, "no platform data?\n");
                return -ENODEV;
        }

        if (!spi->irq) {
                dev_err(&spi->dev, "no IRQ?\n");
                return -ENODEV;
        }

        indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
        if (!indio_dev)
                return -ENOMEM;

        st = iio_priv(indio_dev);

        mutex_init(&st->lock);

        st->avdd = devm_regulator_get(&spi->dev, "avdd");
        if (IS_ERR(st->avdd))
                return PTR_ERR(st->avdd);

        ret = regulator_enable(st->avdd);
        if (ret) {
                dev_err(&spi->dev, "Failed to enable specified AVdd supply\n");
                return ret;
        }

        st->dvdd = devm_regulator_get(&spi->dev, "dvdd");
        if (IS_ERR(st->dvdd)) {
                ret = PTR_ERR(st->dvdd);
                goto error_disable_avdd;
        }

        ret = regulator_enable(st->dvdd);
        if (ret) {
                dev_err(&spi->dev, "Failed to enable specified DVdd supply\n");
                goto error_disable_avdd;
        }

        voltage_uv = regulator_get_voltage(st->avdd);

        if (pdata->vref_mv)
                st->int_vref_mv = pdata->vref_mv;
        else if (voltage_uv)
                st->int_vref_mv = voltage_uv / 1000;
        else
                dev_warn(&spi->dev, "reference voltage undefined\n");

        spi_set_drvdata(spi, indio_dev);
        st->devid = spi_get_device_id(spi)->driver_data;
        indio_dev->dev.parent = &spi->dev;
        indio_dev->name = spi_get_device_id(spi)->name;
        indio_dev->modes = INDIO_DIRECT_MODE;

        switch (st->devid) {
        case ID_AD7193:
                indio_dev->channels = ad7193_channels;
                indio_dev->num_channels = ARRAY_SIZE(ad7193_channels);
                break;
        default:
                indio_dev->channels = ad7192_channels;
                indio_dev->num_channels = ARRAY_SIZE(ad7192_channels);
                break;
        }

        if (st->devid == ID_AD7195)
                indio_dev->info = &ad7195_info;
        else
                indio_dev->info = &ad7192_info;

        ad_sd_init(&st->sd, indio_dev, spi, &ad7192_sigma_delta_info);

        ret = ad_sd_setup_buffer_and_trigger(indio_dev);
        if (ret)
                goto error_disable_dvdd;

        ret = ad7192_setup(st, pdata);
        if (ret)
                goto error_remove_trigger;

        ret = iio_device_register(indio_dev);
        if (ret < 0)
                goto error_remove_trigger;
        return 0;

error_remove_trigger:
        ad_sd_cleanup_buffer_and_trigger(indio_dev);
error_disable_dvdd:
        regulator_disable(st->dvdd);
error_disable_avdd:
        regulator_disable(st->avdd);

        return ret;
}

static int ad7192_remove(struct spi_device *spi)
{
        struct iio_dev *indio_dev = spi_get_drvdata(spi);
        struct ad7192_state *st = iio_priv(indio_dev);

        iio_device_unregister(indio_dev);
        ad_sd_cleanup_buffer_and_trigger(indio_dev);

        regulator_disable(st->dvdd);
        regulator_disable(st->avdd);

        return 0;
}

static const struct spi_device_id ad7192_id[] = {
        {"ad7190", ID_AD7190},
        {"ad7192", ID_AD7192},
        {"ad7193", ID_AD7193},
        {"ad7195", ID_AD7195},
        {}
};
MODULE_DEVICE_TABLE(spi, ad7192_id);

static struct spi_driver ad7192_driver = {
        .driver = {
                .name   = "ad7192",
        },
        .probe          = ad7192_probe,
        .remove         = ad7192_remove,
        .id_table       = ad7192_id,
};
module_spi_driver(ad7192_driver);

MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
MODULE_DESCRIPTION("Analog Devices AD7190, AD7192, AD7193, AD7195 ADC");
MODULE_LICENSE("GPL v2");