LXR linux/drivers/tty/serial/atmel

   1/* SPDX-License-Identifier: GPL-2.0+ */
   2/*
   3 * include/linux/atmel_serial.h
   4 *
   5 * Copyright (C) 2005 Ivan Kokshaysky
   6 * Copyright (C) SAN People
   7 *
   8 * USART registers.
   9 * Based on AT91RM9200 datasheet revision E.
  10 */
  11
  12#ifndef ATMEL_SERIAL_H
  13#define ATMEL_SERIAL_H
  14
  15#define ATMEL_US_CR             0x00    /* Control Register */
  16#define ATMEL_US_RSTRX          BIT(2)  /* Reset Receiver */
  17#define ATMEL_US_RSTTX          BIT(3)  /* Reset Transmitter */
  18#define ATMEL_US_RXEN           BIT(4)  /* Receiver Enable */
  19#define ATMEL_US_RXDIS          BIT(5)  /* Receiver Disable */
  20#define ATMEL_US_TXEN           BIT(6)  /* Transmitter Enable */
  21#define ATMEL_US_TXDIS          BIT(7)  /* Transmitter Disable */
  22#define ATMEL_US_RSTSTA         BIT(8)  /* Reset Status Bits */
  23#define ATMEL_US_STTBRK         BIT(9)  /* Start Break */
  24#define ATMEL_US_STPBRK         BIT(10) /* Stop Break */
  25#define ATMEL_US_STTTO          BIT(11) /* Start Time-out */
  26#define ATMEL_US_SENDA          BIT(12) /* Send Address */
  27#define ATMEL_US_RSTIT          BIT(13) /* Reset Iterations */
  28#define ATMEL_US_RSTNACK        BIT(14) /* Reset Non Acknowledge */
  29#define ATMEL_US_RETTO          BIT(15) /* Rearm Time-out */
  30#define ATMEL_US_DTREN          BIT(16) /* Data Terminal Ready Enable */
  31#define ATMEL_US_DTRDIS         BIT(17) /* Data Terminal Ready Disable */
  32#define ATMEL_US_RTSEN          BIT(18) /* Request To Send Enable */
  33#define ATMEL_US_RTSDIS         BIT(19) /* Request To Send Disable */
  34#define ATMEL_US_TXFCLR         BIT(24) /* Transmit FIFO Clear */
  35#define ATMEL_US_RXFCLR         BIT(25) /* Receive FIFO Clear */
  36#define ATMEL_US_TXFLCLR        BIT(26) /* Transmit FIFO Lock Clear */
  37#define ATMEL_US_FIFOEN         BIT(30) /* FIFO enable */
  38#define ATMEL_US_FIFODIS        BIT(31) /* FIFO disable */
  39
  40#define ATMEL_US_MR             0x04    /* Mode Register */
  41#define ATMEL_US_USMODE         GENMASK(3, 0)   /* Mode of the USART */
  42#define         ATMEL_US_USMODE_NORMAL          0
  43#define         ATMEL_US_USMODE_RS485           1
  44#define         ATMEL_US_USMODE_HWHS            2
  45#define         ATMEL_US_USMODE_MODEM           3
  46#define         ATMEL_US_USMODE_ISO7816_T0      4
  47#define         ATMEL_US_USMODE_ISO7816_T1      6
  48#define         ATMEL_US_USMODE_IRDA            8
  49#define ATMEL_US_USCLKS         GENMASK(5, 4)   /* Clock Selection */
  50#define         ATMEL_US_USCLKS_MCK             (0 <<  4)
  51#define         ATMEL_US_USCLKS_MCK_DIV8        (1 <<  4)
  52#define         ATMEL_US_USCLKS_SCK             (3 <<  4)
  53#define ATMEL_US_CHRL           GENMASK(7, 6)   /* Character Length */
  54#define         ATMEL_US_CHRL_5                 (0 <<  6)
  55#define         ATMEL_US_CHRL_6                 (1 <<  6)
  56#define         ATMEL_US_CHRL_7                 (2 <<  6)
  57#define         ATMEL_US_CHRL_8                 (3 <<  6)
  58#define ATMEL_US_SYNC           BIT(8)          /* Synchronous Mode Select */
  59#define ATMEL_US_PAR            GENMASK(11, 9)  /* Parity Type */
  60#define         ATMEL_US_PAR_EVEN               (0 <<  9)
  61#define         ATMEL_US_PAR_ODD                (1 <<  9)
  62#define         ATMEL_US_PAR_SPACE              (2 <<  9)
  63#define         ATMEL_US_PAR_MARK               (3 <<  9)
  64#define         ATMEL_US_PAR_NONE               (4 <<  9)
  65#define         ATMEL_US_PAR_MULTI_DROP         (6 <<  9)
  66#define ATMEL_US_NBSTOP         GENMASK(13, 12) /* Number of Stop Bits */
  67#define         ATMEL_US_NBSTOP_1               (0 << 12)
  68#define         ATMEL_US_NBSTOP_1_5             (1 << 12)
  69#define         ATMEL_US_NBSTOP_2               (2 << 12)
  70#define ATMEL_US_CHMODE         GENMASK(15, 14) /* Channel Mode */
  71#define         ATMEL_US_CHMODE_NORMAL          (0 << 14)
  72#define         ATMEL_US_CHMODE_ECHO            (1 << 14)
  73#define         ATMEL_US_CHMODE_LOC_LOOP        (2 << 14)
  74#define         ATMEL_US_CHMODE_REM_LOOP        (3 << 14)
  75#define ATMEL_US_MSBF           BIT(16) /* Bit Order */
  76#define ATMEL_US_MODE9          BIT(17) /* 9-bit Character Length */
  77#define ATMEL_US_CLKO           BIT(18) /* Clock Output Select */
  78#define ATMEL_US_OVER           BIT(19) /* Oversampling Mode */
  79#define ATMEL_US_INACK          BIT(20) /* Inhibit Non Acknowledge */
  80#define ATMEL_US_DSNACK         BIT(21) /* Disable Successive NACK */
  81#define ATMEL_US_MAX_ITER       GENMASK(26, 24) /* Max Iterations */
  82#define ATMEL_US_FILTER         BIT(28) /* Infrared Receive Line Filter */
  83
  84#define ATMEL_US_IER            0x08    /* Interrupt Enable Register */
  85#define ATMEL_US_RXRDY          BIT(0)  /* Receiver Ready */
  86#define ATMEL_US_TXRDY          BIT(1)  /* Transmitter Ready */
  87#define ATMEL_US_RXBRK          BIT(2)  /* Break Received / End of Break */
  88#define ATMEL_US_ENDRX          BIT(3)  /* End of Receiver Transfer */
  89#define ATMEL_US_ENDTX          BIT(4)  /* End of Transmitter Transfer */
  90#define ATMEL_US_OVRE           BIT(5)  /* Overrun Error */
  91#define ATMEL_US_FRAME          BIT(6)  /* Framing Error */
  92#define ATMEL_US_PARE           BIT(7)  /* Parity Error */
  93#define ATMEL_US_TIMEOUT        BIT(8)  /* Receiver Time-out */
  94#define ATMEL_US_TXEMPTY        BIT(9)  /* Transmitter Empty */
  95#define ATMEL_US_ITERATION      BIT(10) /* Max number of Repetitions Reached */
  96#define ATMEL_US_TXBUFE         BIT(11) /* Transmission Buffer Empty */
  97#define ATMEL_US_RXBUFF         BIT(12) /* Reception Buffer Full */
  98#define ATMEL_US_NACK           BIT(13) /* Non Acknowledge */
  99#define ATMEL_US_RIIC           BIT(16) /* Ring Indicator Input Change */
 100#define ATMEL_US_DSRIC          BIT(17) /* Data Set Ready Input Change */
 101#define ATMEL_US_DCDIC          BIT(18) /* Data Carrier Detect Input Change */
 102#define ATMEL_US_CTSIC          BIT(19) /* Clear to Send Input Change */
 103#define ATMEL_US_RI             BIT(20) /* RI */
 104#define ATMEL_US_DSR            BIT(21) /* DSR */
 105#define ATMEL_US_DCD            BIT(22) /* DCD */
 106#define ATMEL_US_CTS            BIT(23) /* CTS */
 107
 108#define ATMEL_US_IDR            0x0c    /* Interrupt Disable Register */
 109#define ATMEL_US_IMR            0x10    /* Interrupt Mask Register */
 110#define ATMEL_US_CSR            0x14    /* Channel Status Register */
 111#define ATMEL_US_RHR            0x18    /* Receiver Holding Register */
 112#define ATMEL_US_THR            0x1c    /* Transmitter Holding Register */
 113#define ATMEL_US_SYNH           BIT(15) /* Transmit/Receive Sync */
 114
 115#define ATMEL_US_BRGR           0x20    /* Baud Rate Generator Register */
 116#define ATMEL_US_CD             GENMASK(15, 0)  /* Clock Divider */
 117#define ATMEL_US_FP_OFFSET      16      /* Fractional Part */
 118#define ATMEL_US_FP_MASK        0x7
 119
 120#define ATMEL_US_RTOR           0x24    /* Receiver Time-out Register for USART */
 121#define ATMEL_UA_RTOR           0x28    /* Receiver Time-out Register for UART */
 122#define ATMEL_US_TO             GENMASK(15, 0)  /* Time-out Value */
 123
 124#define ATMEL_US_TTGR           0x28    /* Transmitter Timeguard Register */
 125#define ATMEL_US_TG             GENMASK(7, 0)   /* Timeguard Value */
 126
 127#define ATMEL_US_FIDI           0x40    /* FI DI Ratio Register */
 128#define ATMEL_US_NER            0x44    /* Number of Errors Register */
 129#define ATMEL_US_IF             0x4c    /* IrDA Filter Register */
 130
 131#define ATMEL_US_CMPR           0x90    /* Comparaison Register */
 132#define ATMEL_US_FMR            0xa0    /* FIFO Mode Register */
 133#define ATMEL_US_TXRDYM(data)   (((data) & 0x3) << 0)   /* TX Ready Mode */
 134#define ATMEL_US_RXRDYM(data)   (((data) & 0x3) << 4)   /* RX Ready Mode */
 135#define         ATMEL_US_ONE_DATA       0x0
 136#define         ATMEL_US_TWO_DATA       0x1
 137#define         ATMEL_US_FOUR_DATA      0x2
 138#define ATMEL_US_FRTSC          BIT(7)  /* FIFO RTS pin Control */
 139#define ATMEL_US_TXFTHRES(thr)  (((thr) & 0x3f) << 8)   /* TX FIFO Threshold */
 140#define ATMEL_US_RXFTHRES(thr)  (((thr) & 0x3f) << 16)  /* RX FIFO Threshold */
 141#define ATMEL_US_RXFTHRES2(thr) (((thr) & 0x3f) << 24)  /* RX FIFO Threshold2 */
 142
 143#define ATMEL_US_FLR            0xa4    /* FIFO Level Register */
 144#define ATMEL_US_TXFL(reg)      (((reg) >> 0) & 0x3f)   /* TX FIFO Level */
 145#define ATMEL_US_RXFL(reg)      (((reg) >> 16) & 0x3f)  /* RX FIFO Level */
 146
 147#define ATMEL_US_FIER           0xa8    /* FIFO Interrupt Enable Register */
 148#define ATMEL_US_FIDR           0xac    /* FIFO Interrupt Disable Register */
 149#define ATMEL_US_FIMR           0xb0    /* FIFO Interrupt Mask Register */
 150#define ATMEL_US_FESR           0xb4    /* FIFO Event Status Register */
 151#define ATMEL_US_TXFEF          BIT(0)  /* Transmit FIFO Empty Flag */
 152#define ATMEL_US_TXFFF          BIT(1)  /* Transmit FIFO Full Flag */
 153#define ATMEL_US_TXFTHF         BIT(2)  /* Transmit FIFO Threshold Flag */
 154#define ATMEL_US_RXFEF          BIT(3)  /* Receive FIFO Empty Flag */
 155#define ATMEL_US_RXFFF          BIT(4)  /* Receive FIFO Full Flag */
 156#define ATMEL_US_RXFTHF         BIT(5)  /* Receive FIFO Threshold Flag */
 157#define ATMEL_US_TXFPTEF        BIT(6)  /* Transmit FIFO Pointer Error Flag */
 158#define ATMEL_US_RXFPTEF        BIT(7)  /* Receive FIFO Pointer Error Flag */
 159#define ATMEL_US_TXFLOCK        BIT(8)  /* Transmit FIFO Lock (FESR only) */
 160#define ATMEL_US_RXFTHF2        BIT(9)  /* Receive FIFO Threshold Flag 2 */
 161
 162#define ATMEL_US_NAME           0xf0    /* Ip Name */
 163#define ATMEL_US_VERSION        0xfc    /* Ip Version */
 164
 165#endif
 166