LXR linux/arch/alpha/kernel/core

   1// SPDX-License-Identifier: GPL-2.0
   2/*
   3 *      linux/arch/alpha/kernel/core_mcpcia.c
   4 *
   5 * Based on code written by David A Rusling (david.rusling@reo.mts.dec.com).
   6 *
   7 * Code common to all MCbus-PCI Adaptor core logic chipsets
   8 */
   9
  10#define __EXTERN_INLINE inline
  11#include <asm/io.h>
  12#include <asm/core_mcpcia.h>
  13#undef __EXTERN_INLINE
  14
  15#include <linux/types.h>
  16#include <linux/pci.h>
  17#include <linux/sched.h>
  18#include <linux/init.h>
  19#include <linux/delay.h>
  20
  21#include <asm/ptrace.h>
  22
  23#include "proto.h"
  24#include "pci_impl.h"
  25
  26/*
  27 * NOTE: Herein lie back-to-back mb instructions.  They are magic. 
  28 * One plausible explanation is that the i/o controller does not properly
  29 * handle the system transaction.  Another involves timing.  Ho hum.
  30 */
  31
  32/*
  33 * BIOS32-style PCI interface:
  34 */
  35
  36#define DEBUG_CFG 0
  37
  38#if DEBUG_CFG
  39# define DBG_CFG(args)  printk args
  40#else
  41# define DBG_CFG(args)
  42#endif
  43
  44/*
  45 * Given a bus, device, and function number, compute resulting
  46 * configuration space address and setup the MCPCIA_HAXR2 register
  47 * accordingly.  It is therefore not safe to have concurrent
  48 * invocations to configuration space access routines, but there
  49 * really shouldn't be any need for this.
  50 *
  51 * Type 0:
  52 *
  53 *  3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1 
  54 *  3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
  55 * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
  56 * | | |D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|F|F|F|R|R|R|R|R|R|0|0|
  57 * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
  58 *
  59 *      31:11   Device select bit.
  60 *      10:8    Function number
  61 *       7:2    Register number
  62 *
  63 * Type 1:
  64 *
  65 *  3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1 
  66 *  3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
  67 * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
  68 * | | | | | | | | | | |B|B|B|B|B|B|B|B|D|D|D|D|D|F|F|F|R|R|R|R|R|R|0|1|
  69 * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
  70 *
  71 *      31:24   reserved
  72 *      23:16   bus number (8 bits = 128 possible buses)
  73 *      15:11   Device number (5 bits)
  74 *      10:8    function number
  75 *       7:2    register number
  76 *  
  77 * Notes:
  78 *      The function number selects which function of a multi-function device 
  79 *      (e.g., SCSI and Ethernet).
  80 * 
  81 *      The register selects a DWORD (32 bit) register offset.  Hence it
  82 *      doesn't get shifted by 2 bits as we want to "drop" the bottom two
  83 *      bits.
  84 */
  85
  86static unsigned int
  87conf_read(unsigned long addr, unsigned char type1,
  88          struct pci_controller *hose)
  89{
  90        unsigned long flags;
  91        unsigned long mid = MCPCIA_HOSE2MID(hose->index);
  92        unsigned int stat0, value, cpu;
  93
  94        cpu = smp_processor_id();
  95
  96        local_irq_save(flags);
  97
  98        DBG_CFG(("conf_read(addr=0x%lx, type1=%d, hose=%d)\n",
  99                 addr, type1, mid));
 100
 101        /* Reset status register to avoid losing errors.  */
 102        stat0 = *(vuip)MCPCIA_CAP_ERR(mid);
 103        *(vuip)MCPCIA_CAP_ERR(mid) = stat0;
 104        mb();
 105        *(vuip)MCPCIA_CAP_ERR(mid);
 106        DBG_CFG(("conf_read: MCPCIA_CAP_ERR(%d) was 0x%x\n", mid, stat0));
 107
 108        mb();
 109        draina();
 110        mcheck_expected(cpu) = 1;
 111        mcheck_taken(cpu) = 0;
 112        mcheck_extra(cpu) = mid;
 113        mb();
 114
 115        /* Access configuration space.  */
 116        value = *((vuip)addr);
 117        mb();
 118        mb();  /* magic */
 119
 120        if (mcheck_taken(cpu)) {
 121                mcheck_taken(cpu) = 0;
 122                value = 0xffffffffU;
 123                mb();
 124        }
 125        mcheck_expected(cpu) = 0;
 126        mb();
 127
 128        DBG_CFG(("conf_read(): finished\n"));
 129
 130        local_irq_restore(flags);
 131        return value;
 132}
 133
 134static void
 135conf_write(unsigned long addr, unsigned int value, unsigned char type1,
 136           struct pci_controller *hose)
 137{
 138        unsigned long flags;
 139        unsigned long mid = MCPCIA_HOSE2MID(hose->index);
 140        unsigned int stat0, cpu;
 141
 142        cpu = smp_processor_id();
 143
 144        local_irq_save(flags);  /* avoid getting hit by machine check */
 145
 146        /* Reset status register to avoid losing errors.  */
 147        stat0 = *(vuip)MCPCIA_CAP_ERR(mid);
 148        *(vuip)MCPCIA_CAP_ERR(mid) = stat0; mb();
 149        *(vuip)MCPCIA_CAP_ERR(mid);
 150        DBG_CFG(("conf_write: MCPCIA CAP_ERR(%d) was 0x%x\n", mid, stat0));
 151
 152        draina();
 153        mcheck_expected(cpu) = 1;
 154        mcheck_extra(cpu) = mid;
 155        mb();
 156
 157        /* Access configuration space.  */
 158        *((vuip)addr) = value;
 159        mb();
 160        mb();  /* magic */
 161        *(vuip)MCPCIA_CAP_ERR(mid); /* read to force the write */
 162        mcheck_expected(cpu) = 0;
 163        mb();
 164
 165        DBG_CFG(("conf_write(): finished\n"));
 166        local_irq_restore(flags);
 167}
 168
 169static int
 170mk_conf_addr(struct pci_bus *pbus, unsigned int devfn, int where,
 171             struct pci_controller *hose, unsigned long *pci_addr,
 172             unsigned char *type1)
 173{
 174        u8 bus = pbus->number;
 175        unsigned long addr;
 176
 177        DBG_CFG(("mk_conf_addr(bus=%d,devfn=0x%x,hose=%d,where=0x%x,"
 178                 " pci_addr=0x%p, type1=0x%p)\n",
 179                 bus, devfn, hose->index, where, pci_addr, type1));
 180
 181        /* Type 1 configuration cycle for *ALL* busses.  */
 182        *type1 = 1;
 183
 184        if (!pbus->parent) /* No parent means peer PCI bus. */
 185                bus = 0;
 186        addr = (bus << 16) | (devfn << 8) | (where);
 187        addr <<= 5; /* swizzle for SPARSE */
 188        addr |= hose->config_space_base;
 189
 190        *pci_addr = addr;
 191        DBG_CFG(("mk_conf_addr: returning pci_addr 0x%lx\n", addr));
 192        return 0;
 193}
 194
 195static int
 196mcpcia_read_config(struct pci_bus *bus, unsigned int devfn, int where,
 197                   int size, u32 *value)
 198{
 199        struct pci_controller *hose = bus->sysdata;
 200        unsigned long addr, w;
 201        unsigned char type1;
 202
 203        if (mk_conf_addr(bus, devfn, where, hose, &addr, &type1))
 204                return PCIBIOS_DEVICE_NOT_FOUND;
 205
 206        addr |= (size - 1) * 8;
 207        w = conf_read(addr, type1, hose);
 208        switch (size) {
 209        case 1:
 210                *value = __kernel_extbl(w, where & 3);
 211                break;
 212        case 2:
 213                *value = __kernel_extwl(w, where & 3);
 214                break;
 215        case 4:
 216                *value = w;
 217                break;
 218        }
 219        return PCIBIOS_SUCCESSFUL;
 220}
 221
 222static int
 223mcpcia_write_config(struct pci_bus *bus, unsigned int devfn, int where,
 224                    int size, u32 value)
 225{
 226        struct pci_controller *hose = bus->sysdata;
 227        unsigned long addr;
 228        unsigned char type1;
 229
 230        if (mk_conf_addr(bus, devfn, where, hose, &addr, &type1))
 231                return PCIBIOS_DEVICE_NOT_FOUND;
 232
 233        addr |= (size - 1) * 8;
 234        value = __kernel_insql(value, where & 3);
 235        conf_write(addr, value, type1, hose);
 236        return PCIBIOS_SUCCESSFUL;
 237}
 238
 239struct pci_ops mcpcia_pci_ops = 
 240{
 241        .read =         mcpcia_read_config,
 242        .write =        mcpcia_write_config,
 243};
 244
 245void
 246mcpcia_pci_tbi(struct pci_controller *hose, dma_addr_t start, dma_addr_t end)
 247{
 248        wmb();
 249        *(vuip)MCPCIA_SG_TBIA(MCPCIA_HOSE2MID(hose->index)) = 0;
 250        mb();
 251}
 252
 253static int __init
 254mcpcia_probe_hose(int h)
 255{
 256        int cpu = smp_processor_id();
 257        int mid = MCPCIA_HOSE2MID(h);
 258        unsigned int pci_rev;
 259
 260        /* Gotta be REAL careful.  If hose is absent, we get an mcheck.  */
 261
 262        mb();
 263        mb();
 264        draina();
 265        wrmces(7);
 266
 267        mcheck_expected(cpu) = 2;       /* indicates probing */
 268        mcheck_taken(cpu) = 0;
 269        mcheck_extra(cpu) = mid;
 270        mb();
 271
 272        /* Access the bus revision word. */
 273        pci_rev = *(vuip)MCPCIA_REV(mid);
 274
 275        mb();
 276        mb();  /* magic */
 277        if (mcheck_taken(cpu)) {
 278                mcheck_taken(cpu) = 0;
 279                pci_rev = 0xffffffff;
 280                mb();
 281        }
 282        mcheck_expected(cpu) = 0;
 283        mb();
 284
 285        return (pci_rev >> 16) == PCI_CLASS_BRIDGE_HOST;
 286}
 287
 288static void __init
 289mcpcia_new_hose(int h)
 290{
 291        struct pci_controller *hose;
 292        struct resource *io, *mem, *hae_mem;
 293        int mid = MCPCIA_HOSE2MID(h);
 294
 295        hose = alloc_pci_controller();
 296        if (h == 0)
 297                pci_isa_hose = hose;
 298        io = alloc_resource();
 299        mem = alloc_resource();
 300        hae_mem = alloc_resource();
 301                        
 302        hose->io_space = io;
 303        hose->mem_space = hae_mem;
 304        hose->sparse_mem_base = MCPCIA_SPARSE(mid) - IDENT_ADDR;
 305        hose->dense_mem_base = MCPCIA_DENSE(mid) - IDENT_ADDR;
 306        hose->sparse_io_base = MCPCIA_IO(mid) - IDENT_ADDR;
 307        hose->dense_io_base = 0;
 308        hose->config_space_base = MCPCIA_CONF(mid);
 309        hose->index = h;
 310
 311        io->start = MCPCIA_IO(mid) - MCPCIA_IO_BIAS;
 312        io->end = io->start + 0xffff;
 313        io->name = pci_io_names[h];
 314        io->flags = IORESOURCE_IO;
 315
 316        mem->start = MCPCIA_DENSE(mid) - MCPCIA_MEM_BIAS;
 317        mem->end = mem->start + 0xffffffff;
 318        mem->name = pci_mem_names[h];
 319        mem->flags = IORESOURCE_MEM;
 320
 321        hae_mem->start = mem->start;
 322        hae_mem->end = mem->start + MCPCIA_MEM_MASK;
 323        hae_mem->name = pci_hae0_name;
 324        hae_mem->flags = IORESOURCE_MEM;
 325
 326        if (request_resource(&ioport_resource, io) < 0)
 327                printk(KERN_ERR "Failed to request IO on hose %d\n", h);
 328        if (request_resource(&iomem_resource, mem) < 0)
 329                printk(KERN_ERR "Failed to request MEM on hose %d\n", h);
 330        if (request_resource(mem, hae_mem) < 0)
 331                printk(KERN_ERR "Failed to request HAE_MEM on hose %d\n", h);
 332}
 333
 334static void
 335mcpcia_pci_clr_err(int mid)
 336{
 337        *(vuip)MCPCIA_CAP_ERR(mid);
 338        *(vuip)MCPCIA_CAP_ERR(mid) = 0xffffffff;   /* Clear them all.  */
 339        mb();
 340        *(vuip)MCPCIA_CAP_ERR(mid);  /* Re-read for force write.  */
 341}
 342
 343static void __init
 344mcpcia_startup_hose(struct pci_controller *hose)
 345{
 346        int mid = MCPCIA_HOSE2MID(hose->index);
 347        unsigned int tmp;
 348
 349        mcpcia_pci_clr_err(mid);
 350
 351        /* 
 352         * Set up error reporting.
 353         */
 354        tmp = *(vuip)MCPCIA_CAP_ERR(mid);
 355        tmp |= 0x0006;          /* master/target abort */
 356        *(vuip)MCPCIA_CAP_ERR(mid) = tmp;
 357        mb();
 358        tmp = *(vuip)MCPCIA_CAP_ERR(mid);
 359
 360        /*
 361         * Set up the PCI->physical memory translation windows.
 362         *
 363         * Window 0 is scatter-gather 8MB at 8MB (for isa)
 364         * Window 1 is scatter-gather (up to) 1GB at 1GB (for pci)
 365         * Window 2 is direct access 2GB at 2GB
 366         */
 367        hose->sg_isa = iommu_arena_new(hose, 0x00800000, 0x00800000, 0);
 368        hose->sg_pci = iommu_arena_new(hose, 0x40000000,
 369                                       size_for_memory(0x40000000), 0);
 370
 371        __direct_map_base = 0x80000000;
 372        __direct_map_size = 0x80000000;
 373
 374        *(vuip)MCPCIA_W0_BASE(mid) = hose->sg_isa->dma_base | 3;
 375        *(vuip)MCPCIA_W0_MASK(mid) = (hose->sg_isa->size - 1) & 0xfff00000;
 376        *(vuip)MCPCIA_T0_BASE(mid) = virt_to_phys(hose->sg_isa->ptes) >> 8;
 377
 378        *(vuip)MCPCIA_W1_BASE(mid) = hose->sg_pci->dma_base | 3;
 379        *(vuip)MCPCIA_W1_MASK(mid) = (hose->sg_pci->size - 1) & 0xfff00000;
 380        *(vuip)MCPCIA_T1_BASE(mid) = virt_to_phys(hose->sg_pci->ptes) >> 8;
 381
 382        *(vuip)MCPCIA_W2_BASE(mid) = __direct_map_base | 1;
 383        *(vuip)MCPCIA_W2_MASK(mid) = (__direct_map_size - 1) & 0xfff00000;
 384        *(vuip)MCPCIA_T2_BASE(mid) = 0;
 385
 386        *(vuip)MCPCIA_W3_BASE(mid) = 0x0;
 387
 388        mcpcia_pci_tbi(hose, 0, -1);
 389
 390        *(vuip)MCPCIA_HBASE(mid) = 0x0;
 391        mb();
 392
 393        *(vuip)MCPCIA_HAE_MEM(mid) = 0U;
 394        mb();
 395        *(vuip)MCPCIA_HAE_MEM(mid); /* read it back. */
 396        *(vuip)MCPCIA_HAE_IO(mid) = 0;
 397        mb();
 398        *(vuip)MCPCIA_HAE_IO(mid);  /* read it back. */
 399}
 400
 401void __init
 402mcpcia_init_arch(void)
 403{
 404        /* With multiple PCI busses, we play with I/O as physical addrs.  */
 405        ioport_resource.end = ~0UL;
 406
 407        /* Allocate hose 0.  That's the one that all the ISA junk hangs
 408           off of, from which we'll be registering stuff here in a bit.
 409           Other hose detection is done in mcpcia_init_hoses, which is
 410           called from init_IRQ.  */
 411
 412        mcpcia_new_hose(0);
 413}
 414
 415/* This is called from init_IRQ, since we cannot take interrupts
 416   before then.  Which means we cannot do this in init_arch.  */
 417
 418void __init
 419mcpcia_init_hoses(void)
 420{
 421        struct pci_controller *hose;
 422        int hose_count;
 423        int h;
 424
 425        /* First, find how many hoses we have.  */
 426        hose_count = 0;
 427        for (h = 0; h < MCPCIA_MAX_HOSES; ++h) {
 428                if (mcpcia_probe_hose(h)) {
 429                        if (h != 0)
 430                                mcpcia_new_hose(h);
 431                        hose_count++;
 432                }
 433        }
 434
 435        printk("mcpcia_init_hoses: found %d hoses\n", hose_count);
 436
 437        /* Now do init for each hose.  */
 438        for (hose = hose_head; hose; hose = hose->next)
 439                mcpcia_startup_hose(hose);
 440}
 441
 442static void
 443mcpcia_print_uncorrectable(struct el_MCPCIA_uncorrected_frame_mcheck *logout)
 444{
 445        struct el_common_EV5_uncorrectable_mcheck *frame;
 446        int i;
 447
 448        frame = &logout->procdata;
 449
 450        /* Print PAL fields */
 451        for (i = 0; i < 24; i += 2) {
 452                printk("  paltmp[%d-%d] = %16lx %16lx\n",
 453                       i, i+1, frame->paltemp[i], frame->paltemp[i+1]);
 454        }
 455        for (i = 0; i < 8; i += 2) {
 456                printk("  shadow[%d-%d] = %16lx %16lx\n",
 457                       i, i+1, frame->shadow[i], 
 458                       frame->shadow[i+1]);
 459        }
 460        printk("  Addr of excepting instruction  = %16lx\n",
 461               frame->exc_addr);
 462        printk("  Summary of arithmetic traps    = %16lx\n",
 463               frame->exc_sum);
 464        printk("  Exception mask                 = %16lx\n",
 465               frame->exc_mask);
 466        printk("  Base address for PALcode       = %16lx\n",
 467               frame->pal_base);
 468        printk("  Interrupt Status Reg           = %16lx\n",
 469               frame->isr);
 470        printk("  CURRENT SETUP OF EV5 IBOX      = %16lx\n",
 471               frame->icsr);
 472        printk("  I-CACHE Reg %s parity error   = %16lx\n",
 473               (frame->ic_perr_stat & 0x800L) ? 
 474               "Data" : "Tag", 
 475               frame->ic_perr_stat); 
 476        printk("  D-CACHE error Reg              = %16lx\n",
 477               frame->dc_perr_stat);
 478        if (frame->dc_perr_stat & 0x2) {
 479                switch (frame->dc_perr_stat & 0x03c) {
 480                case 8:
 481                        printk("    Data error in bank 1\n");
 482                        break;
 483                case 4:
 484                        printk("    Data error in bank 0\n");
 485                        break;
 486                case 20:
 487                        printk("    Tag error in bank 1\n");
 488                        break;
 489                case 10:
 490                        printk("    Tag error in bank 0\n");
 491                        break;
 492                }
 493        }
 494        printk("  Effective VA                   = %16lx\n",
 495               frame->va);
 496        printk("  Reason for D-stream            = %16lx\n",
 497               frame->mm_stat);
 498        printk("  EV5 SCache address             = %16lx\n",
 499               frame->sc_addr);
 500        printk("  EV5 SCache TAG/Data parity     = %16lx\n",
 501               frame->sc_stat);
 502        printk("  EV5 BC_TAG_ADDR                = %16lx\n",
 503               frame->bc_tag_addr);
 504        printk("  EV5 EI_ADDR: Phys addr of Xfer = %16lx\n",
 505               frame->ei_addr);
 506        printk("  Fill Syndrome                  = %16lx\n",
 507               frame->fill_syndrome);
 508        printk("  EI_STAT reg                    = %16lx\n",
 509               frame->ei_stat);
 510        printk("  LD_LOCK                        = %16lx\n",
 511               frame->ld_lock);
 512}
 513
 514static void
 515mcpcia_print_system_area(unsigned long la_ptr)
 516{
 517        struct el_common *frame;
 518        struct pci_controller *hose;
 519
 520        struct IOD_subpacket {
 521          unsigned long base;
 522          unsigned int whoami;
 523          unsigned int rsvd1;
 524          unsigned int pci_rev;
 525          unsigned int cap_ctrl;
 526          unsigned int hae_mem;
 527          unsigned int hae_io;
 528          unsigned int int_ctl;
 529          unsigned int int_reg;
 530          unsigned int int_mask0;
 531          unsigned int int_mask1;
 532          unsigned int mc_err0;
 533          unsigned int mc_err1;
 534          unsigned int cap_err;
 535          unsigned int rsvd2;
 536          unsigned int pci_err1;
 537          unsigned int mdpa_stat;
 538          unsigned int mdpa_syn;
 539          unsigned int mdpb_stat;
 540          unsigned int mdpb_syn;
 541          unsigned int rsvd3;
 542          unsigned int rsvd4;
 543          unsigned int rsvd5;
 544        } *iodpp;
 545
 546        frame = (struct el_common *)la_ptr;
 547        iodpp = (struct IOD_subpacket *) (la_ptr + frame->sys_offset);
 548
 549        for (hose = hose_head; hose; hose = hose->next, iodpp++) {
 550
 551          printk("IOD %d Register Subpacket - Bridge Base Address %16lx\n",
 552                 hose->index, iodpp->base);
 553          printk("  WHOAMI      = %8x\n", iodpp->whoami);
 554          printk("  PCI_REV     = %8x\n", iodpp->pci_rev);
 555          printk("  CAP_CTRL    = %8x\n", iodpp->cap_ctrl);
 556          printk("  HAE_MEM     = %8x\n", iodpp->hae_mem);
 557          printk("  HAE_IO      = %8x\n", iodpp->hae_io);
 558          printk("  INT_CTL     = %8x\n", iodpp->int_ctl);
 559          printk("  INT_REG     = %8x\n", iodpp->int_reg);
 560          printk("  INT_MASK0   = %8x\n", iodpp->int_mask0);
 561          printk("  INT_MASK1   = %8x\n", iodpp->int_mask1);
 562          printk("  MC_ERR0     = %8x\n", iodpp->mc_err0);
 563          printk("  MC_ERR1     = %8x\n", iodpp->mc_err1);
 564          printk("  CAP_ERR     = %8x\n", iodpp->cap_err);
 565          printk("  PCI_ERR1    = %8x\n", iodpp->pci_err1);
 566          printk("  MDPA_STAT   = %8x\n", iodpp->mdpa_stat);
 567          printk("  MDPA_SYN    = %8x\n", iodpp->mdpa_syn);
 568          printk("  MDPB_STAT   = %8x\n", iodpp->mdpb_stat);
 569          printk("  MDPB_SYN    = %8x\n", iodpp->mdpb_syn);
 570        }
 571}
 572
 573void
 574mcpcia_machine_check(unsigned long vector, unsigned long la_ptr)
 575{
 576        struct el_MCPCIA_uncorrected_frame_mcheck *mchk_logout;
 577        unsigned int cpu = smp_processor_id();
 578        int expected;
 579
 580        mchk_logout = (struct el_MCPCIA_uncorrected_frame_mcheck *)la_ptr;
 581        expected = mcheck_expected(cpu);
 582
 583        mb();
 584        mb();  /* magic */
 585        draina();
 586
 587        switch (expected) {
 588        case 0:
 589            {
 590                /* FIXME: how do we figure out which hose the
 591                   error was on?  */    
 592                struct pci_controller *hose;
 593                for (hose = hose_head; hose; hose = hose->next)
 594                        mcpcia_pci_clr_err(MCPCIA_HOSE2MID(hose->index));
 595                break;
 596            }
 597        case 1:
 598                mcpcia_pci_clr_err(mcheck_extra(cpu));
 599                break;
 600        default:
 601                /* Otherwise, we're being called from mcpcia_probe_hose
 602                   and there's no hose clear an error from.  */
 603                break;
 604        }
 605
 606        wrmces(0x7);
 607        mb();
 608
 609        process_mcheck_info(vector, la_ptr, "MCPCIA", expected != 0);
 610        if (!expected && vector != 0x620 && vector != 0x630) {
 611                mcpcia_print_uncorrectable(mchk_logout);
 612                mcpcia_print_system_area(la_ptr);
 613        }
 614}
 615