linux/arch/arm/mach-ep93xx/edb93xx.c
<<
>>
Prefs
   1/*
   2 * arch/arm/mach-ep93xx/edb93xx.c
   3 * Cirrus Logic EDB93xx Development Board support.
   4 *
   5 * EDB93XX, EDB9301, EDB9307A
   6 * Copyright (C) 2008-2009 H Hartley Sweeten <hsweeten@visionengravers.com>
   7 *
   8 * EDB9302
   9 * Copyright (C) 2006 George Kashperko <george@chas.com.ua>
  10 *
  11 * EDB9302A, EDB9315, EDB9315A
  12 * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
  13 *
  14 * EDB9307
  15 * Copyright (C) 2007 Herbert Valerio Riedel <hvr@gnu.org>
  16 *
  17 * EDB9312
  18 * Copyright (C) 2006 Infosys Technologies Limited
  19 *                    Toufeeq Hussain <toufeeq_hussain@infosys.com>
  20 *
  21 * This program is free software; you can redistribute it and/or modify
  22 * it under the terms of the GNU General Public License as published by
  23 * the Free Software Foundation; either version 2 of the License, or (at
  24 * your option) any later version.
  25 */
  26
  27#include <linux/kernel.h>
  28#include <linux/init.h>
  29#include <linux/platform_device.h>
  30#include <linux/i2c.h>
  31#include <linux/spi/spi.h>
  32
  33#include <sound/cs4271.h>
  34
  35#include <mach/hardware.h>
  36#include <linux/platform_data/video-ep93xx.h>
  37#include <linux/platform_data/spi-ep93xx.h>
  38#include <mach/gpio-ep93xx.h>
  39
  40#include <asm/mach-types.h>
  41#include <asm/mach/arch.h>
  42
  43#include "soc.h"
  44
  45static void __init edb93xx_register_flash(void)
  46{
  47        if (machine_is_edb9307() || machine_is_edb9312() ||
  48            machine_is_edb9315()) {
  49                ep93xx_register_flash(4, EP93XX_CS6_PHYS_BASE, SZ_32M);
  50        } else {
  51                ep93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_16M);
  52        }
  53}
  54
  55static struct ep93xx_eth_data __initdata edb93xx_eth_data = {
  56        .phy_id         = 1,
  57};
  58
  59
  60/*************************************************************************
  61 * EDB93xx i2c peripheral handling
  62 *************************************************************************/
  63
  64static struct i2c_board_info __initdata edb93xxa_i2c_board_info[] = {
  65        {
  66                I2C_BOARD_INFO("isl1208", 0x6f),
  67        },
  68};
  69
  70static struct i2c_board_info __initdata edb93xx_i2c_board_info[] = {
  71        {
  72                I2C_BOARD_INFO("ds1337", 0x68),
  73        },
  74};
  75
  76static void __init edb93xx_register_i2c(void)
  77{
  78        if (machine_is_edb9302a() || machine_is_edb9307a() ||
  79            machine_is_edb9315a()) {
  80                ep93xx_register_i2c(edb93xxa_i2c_board_info,
  81                                    ARRAY_SIZE(edb93xxa_i2c_board_info));
  82        } else if (machine_is_edb9302() || machine_is_edb9307()
  83                || machine_is_edb9312() || machine_is_edb9315()) {
  84                ep93xx_register_i2c(edb93xx_i2c_board_info,
  85                                    ARRAY_SIZE(edb93xx_i2c_board_info));
  86        }
  87}
  88
  89
  90/*************************************************************************
  91 * EDB93xx SPI peripheral handling
  92 *************************************************************************/
  93static struct cs4271_platform_data edb93xx_cs4271_data = {
  94        .gpio_nreset    = -EINVAL,      /* filled in later */
  95};
  96
  97static struct spi_board_info edb93xx_spi_board_info[] __initdata = {
  98        {
  99                .modalias               = "cs4271",
 100                .platform_data          = &edb93xx_cs4271_data,
 101                .max_speed_hz           = 6000000,
 102                .bus_num                = 0,
 103                .chip_select            = 0,
 104                .mode                   = SPI_MODE_3,
 105        },
 106};
 107
 108static int edb93xx_spi_chipselects[] __initdata = {
 109        EP93XX_GPIO_LINE_EGPIO6,
 110};
 111
 112static struct ep93xx_spi_info edb93xx_spi_info __initdata = {
 113        .chipselect     = edb93xx_spi_chipselects,
 114        .num_chipselect = ARRAY_SIZE(edb93xx_spi_chipselects),
 115};
 116
 117static void __init edb93xx_register_spi(void)
 118{
 119        if (machine_is_edb9301() || machine_is_edb9302())
 120                edb93xx_cs4271_data.gpio_nreset = EP93XX_GPIO_LINE_EGPIO1;
 121        else if (machine_is_edb9302a() || machine_is_edb9307a())
 122                edb93xx_cs4271_data.gpio_nreset = EP93XX_GPIO_LINE_H(2);
 123        else if (machine_is_edb9315a())
 124                edb93xx_cs4271_data.gpio_nreset = EP93XX_GPIO_LINE_EGPIO14;
 125
 126        ep93xx_register_spi(&edb93xx_spi_info, edb93xx_spi_board_info,
 127                            ARRAY_SIZE(edb93xx_spi_board_info));
 128}
 129
 130
 131/*************************************************************************
 132 * EDB93xx I2S
 133 *************************************************************************/
 134static struct platform_device edb93xx_audio_device = {
 135        .name           = "edb93xx-audio",
 136        .id             = -1,
 137};
 138
 139static int __init edb93xx_has_audio(void)
 140{
 141        return (machine_is_edb9301() || machine_is_edb9302() ||
 142                machine_is_edb9302a() || machine_is_edb9307a() ||
 143                machine_is_edb9315a());
 144}
 145
 146static void __init edb93xx_register_i2s(void)
 147{
 148        if (edb93xx_has_audio()) {
 149                ep93xx_register_i2s();
 150                platform_device_register(&edb93xx_audio_device);
 151        }
 152}
 153
 154
 155/*************************************************************************
 156 * EDB93xx pwm
 157 *************************************************************************/
 158static void __init edb93xx_register_pwm(void)
 159{
 160        if (machine_is_edb9301() ||
 161            machine_is_edb9302() || machine_is_edb9302a()) {
 162                /* EP9301 and EP9302 only have pwm.1 (EGPIO14) */
 163                ep93xx_register_pwm(0, 1);
 164        } else if (machine_is_edb9307() || machine_is_edb9307a()) {
 165                /* EP9307 only has pwm.0 (PWMOUT) */
 166                ep93xx_register_pwm(1, 0);
 167        } else {
 168                /* EP9312 and EP9315 have both */
 169                ep93xx_register_pwm(1, 1);
 170        }
 171}
 172
 173
 174/*************************************************************************
 175 * EDB93xx framebuffer
 176 *************************************************************************/
 177static struct ep93xxfb_mach_info __initdata edb93xxfb_info = {
 178        .flags          = 0,
 179};
 180
 181static int __init edb93xx_has_fb(void)
 182{
 183        /* These platforms have an ep93xx with video capability */
 184        return machine_is_edb9307() || machine_is_edb9307a() ||
 185               machine_is_edb9312() || machine_is_edb9315() ||
 186               machine_is_edb9315a();
 187}
 188
 189static void __init edb93xx_register_fb(void)
 190{
 191        if (!edb93xx_has_fb())
 192                return;
 193
 194        if (machine_is_edb9307a() || machine_is_edb9315a())
 195                edb93xxfb_info.flags |= EP93XXFB_USE_SDCSN0;
 196        else
 197                edb93xxfb_info.flags |= EP93XXFB_USE_SDCSN3;
 198
 199        ep93xx_register_fb(&edb93xxfb_info);
 200}
 201
 202
 203/*************************************************************************
 204 * EDB93xx IDE
 205 *************************************************************************/
 206static int __init edb93xx_has_ide(void)
 207{
 208        /*
 209         * Although EDB9312 and EDB9315 do have IDE capability, they have
 210         * INTRQ line wired as pull-up, which makes using IDE interface
 211         * problematic.
 212         */
 213        return machine_is_edb9312() || machine_is_edb9315() ||
 214               machine_is_edb9315a();
 215}
 216
 217static void __init edb93xx_register_ide(void)
 218{
 219        if (!edb93xx_has_ide())
 220                return;
 221
 222        ep93xx_register_ide();
 223}
 224
 225
 226static void __init edb93xx_init_machine(void)
 227{
 228        ep93xx_init_devices();
 229        edb93xx_register_flash();
 230        ep93xx_register_eth(&edb93xx_eth_data, 1);
 231        edb93xx_register_i2c();
 232        edb93xx_register_spi();
 233        edb93xx_register_i2s();
 234        edb93xx_register_pwm();
 235        edb93xx_register_fb();
 236        edb93xx_register_ide();
 237        ep93xx_register_adc();
 238}
 239
 240
 241#ifdef CONFIG_MACH_EDB9301
 242MACHINE_START(EDB9301, "Cirrus Logic EDB9301 Evaluation Board")
 243        /* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */
 244        .atag_offset    = 0x100,
 245        .map_io         = ep93xx_map_io,
 246        .init_irq       = ep93xx_init_irq,
 247        .init_time      = ep93xx_timer_init,
 248        .init_machine   = edb93xx_init_machine,
 249        .init_late      = ep93xx_init_late,
 250        .restart        = ep93xx_restart,
 251MACHINE_END
 252#endif
 253
 254#ifdef CONFIG_MACH_EDB9302
 255MACHINE_START(EDB9302, "Cirrus Logic EDB9302 Evaluation Board")
 256        /* Maintainer: George Kashperko <george@chas.com.ua> */
 257        .atag_offset    = 0x100,
 258        .map_io         = ep93xx_map_io,
 259        .init_irq       = ep93xx_init_irq,
 260        .init_time      = ep93xx_timer_init,
 261        .init_machine   = edb93xx_init_machine,
 262        .init_late      = ep93xx_init_late,
 263        .restart        = ep93xx_restart,
 264MACHINE_END
 265#endif
 266
 267#ifdef CONFIG_MACH_EDB9302A
 268MACHINE_START(EDB9302A, "Cirrus Logic EDB9302A Evaluation Board")
 269        /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
 270        .atag_offset    = 0x100,
 271        .map_io         = ep93xx_map_io,
 272        .init_irq       = ep93xx_init_irq,
 273        .init_time      = ep93xx_timer_init,
 274        .init_machine   = edb93xx_init_machine,
 275        .init_late      = ep93xx_init_late,
 276        .restart        = ep93xx_restart,
 277MACHINE_END
 278#endif
 279
 280#ifdef CONFIG_MACH_EDB9307
 281MACHINE_START(EDB9307, "Cirrus Logic EDB9307 Evaluation Board")
 282        /* Maintainer: Herbert Valerio Riedel <hvr@gnu.org> */
 283        .atag_offset    = 0x100,
 284        .map_io         = ep93xx_map_io,
 285        .init_irq       = ep93xx_init_irq,
 286        .init_time      = ep93xx_timer_init,
 287        .init_machine   = edb93xx_init_machine,
 288        .init_late      = ep93xx_init_late,
 289        .restart        = ep93xx_restart,
 290MACHINE_END
 291#endif
 292
 293#ifdef CONFIG_MACH_EDB9307A
 294MACHINE_START(EDB9307A, "Cirrus Logic EDB9307A Evaluation Board")
 295        /* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */
 296        .atag_offset    = 0x100,
 297        .map_io         = ep93xx_map_io,
 298        .init_irq       = ep93xx_init_irq,
 299        .init_time      = ep93xx_timer_init,
 300        .init_machine   = edb93xx_init_machine,
 301        .init_late      = ep93xx_init_late,
 302        .restart        = ep93xx_restart,
 303MACHINE_END
 304#endif
 305
 306#ifdef CONFIG_MACH_EDB9312
 307MACHINE_START(EDB9312, "Cirrus Logic EDB9312 Evaluation Board")
 308        /* Maintainer: Toufeeq Hussain <toufeeq_hussain@infosys.com> */
 309        .atag_offset    = 0x100,
 310        .map_io         = ep93xx_map_io,
 311        .init_irq       = ep93xx_init_irq,
 312        .init_time      = ep93xx_timer_init,
 313        .init_machine   = edb93xx_init_machine,
 314        .init_late      = ep93xx_init_late,
 315        .restart        = ep93xx_restart,
 316MACHINE_END
 317#endif
 318
 319#ifdef CONFIG_MACH_EDB9315
 320MACHINE_START(EDB9315, "Cirrus Logic EDB9315 Evaluation Board")
 321        /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
 322        .atag_offset    = 0x100,
 323        .map_io         = ep93xx_map_io,
 324        .init_irq       = ep93xx_init_irq,
 325        .init_time      = ep93xx_timer_init,
 326        .init_machine   = edb93xx_init_machine,
 327        .init_late      = ep93xx_init_late,
 328        .restart        = ep93xx_restart,
 329MACHINE_END
 330#endif
 331
 332#ifdef CONFIG_MACH_EDB9315A
 333MACHINE_START(EDB9315A, "Cirrus Logic EDB9315A Evaluation Board")
 334        /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
 335        .atag_offset    = 0x100,
 336        .map_io         = ep93xx_map_io,
 337        .init_irq       = ep93xx_init_irq,
 338        .init_time      = ep93xx_timer_init,
 339        .init_machine   = edb93xx_init_machine,
 340        .init_late      = ep93xx_init_late,
 341        .restart        = ep93xx_restart,
 342MACHINE_END
 343#endif
 344