linux/drivers/ata/sata_sil24.c
<<
>>
Prefs
   1/*
   2 * sata_sil24.c - Driver for Silicon Image 3124/3132 SATA-2 controllers
   3 *
   4 * Copyright 2005  Tejun Heo
   5 *
   6 * Based on preview driver from Silicon Image.
   7 *
   8 * This program is free software; you can redistribute it and/or modify it
   9 * under the terms of the GNU General Public License as published by the
  10 * Free Software Foundation; either version 2, or (at your option) any
  11 * later version.
  12 *
  13 * This program is distributed in the hope that it will be useful, but
  14 * WITHOUT ANY WARRANTY; without even the implied warranty of
  15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  16 * General Public License for more details.
  17 *
  18 */
  19
  20#include <linux/kernel.h>
  21#include <linux/module.h>
  22#include <linux/gfp.h>
  23#include <linux/pci.h>
  24#include <linux/blkdev.h>
  25#include <linux/delay.h>
  26#include <linux/interrupt.h>
  27#include <linux/dma-mapping.h>
  28#include <linux/device.h>
  29#include <scsi/scsi_host.h>
  30#include <scsi/scsi_cmnd.h>
  31#include <linux/libata.h>
  32
  33#define DRV_NAME        "sata_sil24"
  34#define DRV_VERSION     "1.1"
  35
  36/*
  37 * Port request block (PRB) 32 bytes
  38 */
  39struct sil24_prb {
  40        __le16  ctrl;
  41        __le16  prot;
  42        __le32  rx_cnt;
  43        u8      fis[6 * 4];
  44};
  45
  46/*
  47 * Scatter gather entry (SGE) 16 bytes
  48 */
  49struct sil24_sge {
  50        __le64  addr;
  51        __le32  cnt;
  52        __le32  flags;
  53};
  54
  55
  56enum {
  57        SIL24_HOST_BAR          = 0,
  58        SIL24_PORT_BAR          = 2,
  59
  60        /* sil24 fetches in chunks of 64bytes.  The first block
  61         * contains the PRB and two SGEs.  From the second block, it's
  62         * consisted of four SGEs and called SGT.  Calculate the
  63         * number of SGTs that fit into one page.
  64         */
  65        SIL24_PRB_SZ            = sizeof(struct sil24_prb)
  66                                  + 2 * sizeof(struct sil24_sge),
  67        SIL24_MAX_SGT           = (PAGE_SIZE - SIL24_PRB_SZ)
  68                                  / (4 * sizeof(struct sil24_sge)),
  69
  70        /* This will give us one unused SGEs for ATA.  This extra SGE
  71         * will be used to store CDB for ATAPI devices.
  72         */
  73        SIL24_MAX_SGE           = 4 * SIL24_MAX_SGT + 1,
  74
  75        /*
  76         * Global controller registers (128 bytes @ BAR0)
  77         */
  78                /* 32 bit regs */
  79        HOST_SLOT_STAT          = 0x00, /* 32 bit slot stat * 4 */
  80        HOST_CTRL               = 0x40,
  81        HOST_IRQ_STAT           = 0x44,
  82        HOST_PHY_CFG            = 0x48,
  83        HOST_BIST_CTRL          = 0x50,
  84        HOST_BIST_PTRN          = 0x54,
  85        HOST_BIST_STAT          = 0x58,
  86        HOST_MEM_BIST_STAT      = 0x5c,
  87        HOST_FLASH_CMD          = 0x70,
  88                /* 8 bit regs */
  89        HOST_FLASH_DATA         = 0x74,
  90        HOST_TRANSITION_DETECT  = 0x75,
  91        HOST_GPIO_CTRL          = 0x76,
  92        HOST_I2C_ADDR           = 0x78, /* 32 bit */
  93        HOST_I2C_DATA           = 0x7c,
  94        HOST_I2C_XFER_CNT       = 0x7e,
  95        HOST_I2C_CTRL           = 0x7f,
  96
  97        /* HOST_SLOT_STAT bits */
  98        HOST_SSTAT_ATTN         = (1 << 31),
  99
 100        /* HOST_CTRL bits */
 101        HOST_CTRL_M66EN         = (1 << 16), /* M66EN PCI bus signal */
 102        HOST_CTRL_TRDY          = (1 << 17), /* latched PCI TRDY */
 103        HOST_CTRL_STOP          = (1 << 18), /* latched PCI STOP */
 104        HOST_CTRL_DEVSEL        = (1 << 19), /* latched PCI DEVSEL */
 105        HOST_CTRL_REQ64         = (1 << 20), /* latched PCI REQ64 */
 106        HOST_CTRL_GLOBAL_RST    = (1 << 31), /* global reset */
 107
 108        /*
 109         * Port registers
 110         * (8192 bytes @ +0x0000, +0x2000, +0x4000 and +0x6000 @ BAR2)
 111         */
 112        PORT_REGS_SIZE          = 0x2000,
 113
 114        PORT_LRAM               = 0x0000, /* 31 LRAM slots and PMP regs */
 115        PORT_LRAM_SLOT_SZ       = 0x0080, /* 32 bytes PRB + 2 SGE, ACT... */
 116
 117        PORT_PMP                = 0x0f80, /* 8 bytes PMP * 16 (128 bytes) */
 118        PORT_PMP_STATUS         = 0x0000, /* port device status offset */
 119        PORT_PMP_QACTIVE        = 0x0004, /* port device QActive offset */
 120        PORT_PMP_SIZE           = 0x0008, /* 8 bytes per PMP */
 121
 122                /* 32 bit regs */
 123        PORT_CTRL_STAT          = 0x1000, /* write: ctrl-set, read: stat */
 124        PORT_CTRL_CLR           = 0x1004, /* write: ctrl-clear */
 125        PORT_IRQ_STAT           = 0x1008, /* high: status, low: interrupt */
 126        PORT_IRQ_ENABLE_SET     = 0x1010, /* write: enable-set */
 127        PORT_IRQ_ENABLE_CLR     = 0x1014, /* write: enable-clear */
 128        PORT_ACTIVATE_UPPER_ADDR= 0x101c,
 129        PORT_EXEC_FIFO          = 0x1020, /* command execution fifo */
 130        PORT_CMD_ERR            = 0x1024, /* command error number */
 131        PORT_FIS_CFG            = 0x1028,
 132        PORT_FIFO_THRES         = 0x102c,
 133                /* 16 bit regs */
 134        PORT_DECODE_ERR_CNT     = 0x1040,
 135        PORT_DECODE_ERR_THRESH  = 0x1042,
 136        PORT_CRC_ERR_CNT        = 0x1044,
 137        PORT_CRC_ERR_THRESH     = 0x1046,
 138        PORT_HSHK_ERR_CNT       = 0x1048,
 139        PORT_HSHK_ERR_THRESH    = 0x104a,
 140                /* 32 bit regs */
 141        PORT_PHY_CFG            = 0x1050,
 142        PORT_SLOT_STAT          = 0x1800,
 143        PORT_CMD_ACTIVATE       = 0x1c00, /* 64 bit cmd activate * 31 (248 bytes) */
 144        PORT_CONTEXT            = 0x1e04,
 145        PORT_EXEC_DIAG          = 0x1e00, /* 32bit exec diag * 16 (64 bytes, 0-10 used on 3124) */
 146        PORT_PSD_DIAG           = 0x1e40, /* 32bit psd diag * 16 (64 bytes, 0-8 used on 3124) */
 147        PORT_SCONTROL           = 0x1f00,
 148        PORT_SSTATUS            = 0x1f04,
 149        PORT_SERROR             = 0x1f08,
 150        PORT_SACTIVE            = 0x1f0c,
 151
 152        /* PORT_CTRL_STAT bits */
 153        PORT_CS_PORT_RST        = (1 << 0), /* port reset */
 154        PORT_CS_DEV_RST         = (1 << 1), /* device reset */
 155        PORT_CS_INIT            = (1 << 2), /* port initialize */
 156        PORT_CS_IRQ_WOC         = (1 << 3), /* interrupt write one to clear */
 157        PORT_CS_CDB16           = (1 << 5), /* 0=12b cdb, 1=16b cdb */
 158        PORT_CS_PMP_RESUME      = (1 << 6), /* PMP resume */
 159        PORT_CS_32BIT_ACTV      = (1 << 10), /* 32-bit activation */
 160        PORT_CS_PMP_EN          = (1 << 13), /* port multiplier enable */
 161        PORT_CS_RDY             = (1 << 31), /* port ready to accept commands */
 162
 163        /* PORT_IRQ_STAT/ENABLE_SET/CLR */
 164        /* bits[11:0] are masked */
 165        PORT_IRQ_COMPLETE       = (1 << 0), /* command(s) completed */
 166        PORT_IRQ_ERROR          = (1 << 1), /* command execution error */
 167        PORT_IRQ_PORTRDY_CHG    = (1 << 2), /* port ready change */
 168        PORT_IRQ_PWR_CHG        = (1 << 3), /* power management change */
 169        PORT_IRQ_PHYRDY_CHG     = (1 << 4), /* PHY ready change */
 170        PORT_IRQ_COMWAKE        = (1 << 5), /* COMWAKE received */
 171        PORT_IRQ_UNK_FIS        = (1 << 6), /* unknown FIS received */
 172        PORT_IRQ_DEV_XCHG       = (1 << 7), /* device exchanged */
 173        PORT_IRQ_8B10B          = (1 << 8), /* 8b/10b decode error threshold */
 174        PORT_IRQ_CRC            = (1 << 9), /* CRC error threshold */
 175        PORT_IRQ_HANDSHAKE      = (1 << 10), /* handshake error threshold */
 176        PORT_IRQ_SDB_NOTIFY     = (1 << 11), /* SDB notify received */
 177
 178        DEF_PORT_IRQ            = PORT_IRQ_COMPLETE | PORT_IRQ_ERROR |
 179                                  PORT_IRQ_PHYRDY_CHG | PORT_IRQ_DEV_XCHG |
 180                                  PORT_IRQ_UNK_FIS | PORT_IRQ_SDB_NOTIFY,
 181
 182        /* bits[27:16] are unmasked (raw) */
 183        PORT_IRQ_RAW_SHIFT      = 16,
 184        PORT_IRQ_MASKED_MASK    = 0x7ff,
 185        PORT_IRQ_RAW_MASK       = (0x7ff << PORT_IRQ_RAW_SHIFT),
 186
 187        /* ENABLE_SET/CLR specific, intr steering - 2 bit field */
 188        PORT_IRQ_STEER_SHIFT    = 30,
 189        PORT_IRQ_STEER_MASK     = (3 << PORT_IRQ_STEER_SHIFT),
 190
 191        /* PORT_CMD_ERR constants */
 192        PORT_CERR_DEV           = 1, /* Error bit in D2H Register FIS */
 193        PORT_CERR_SDB           = 2, /* Error bit in SDB FIS */
 194        PORT_CERR_DATA          = 3, /* Error in data FIS not detected by dev */
 195        PORT_CERR_SEND          = 4, /* Initial cmd FIS transmission failure */
 196        PORT_CERR_INCONSISTENT  = 5, /* Protocol mismatch */
 197        PORT_CERR_DIRECTION     = 6, /* Data direction mismatch */
 198        PORT_CERR_UNDERRUN      = 7, /* Ran out of SGEs while writing */
 199        PORT_CERR_OVERRUN       = 8, /* Ran out of SGEs while reading */
 200        PORT_CERR_PKT_PROT      = 11, /* DIR invalid in 1st PIO setup of ATAPI */
 201        PORT_CERR_SGT_BOUNDARY  = 16, /* PLD ecode 00 - SGT not on qword boundary */
 202        PORT_CERR_SGT_TGTABRT   = 17, /* PLD ecode 01 - target abort */
 203        PORT_CERR_SGT_MSTABRT   = 18, /* PLD ecode 10 - master abort */
 204        PORT_CERR_SGT_PCIPERR   = 19, /* PLD ecode 11 - PCI parity err while fetching SGT */
 205        PORT_CERR_CMD_BOUNDARY  = 24, /* ctrl[15:13] 001 - PRB not on qword boundary */
 206        PORT_CERR_CMD_TGTABRT   = 25, /* ctrl[15:13] 010 - target abort */
 207        PORT_CERR_CMD_MSTABRT   = 26, /* ctrl[15:13] 100 - master abort */
 208        PORT_CERR_CMD_PCIPERR   = 27, /* ctrl[15:13] 110 - PCI parity err while fetching PRB */
 209        PORT_CERR_XFR_UNDEF     = 32, /* PSD ecode 00 - undefined */
 210        PORT_CERR_XFR_TGTABRT   = 33, /* PSD ecode 01 - target abort */
 211        PORT_CERR_XFR_MSTABRT   = 34, /* PSD ecode 10 - master abort */
 212        PORT_CERR_XFR_PCIPERR   = 35, /* PSD ecode 11 - PCI prity err during transfer */
 213        PORT_CERR_SENDSERVICE   = 36, /* FIS received while sending service */
 214
 215        /* bits of PRB control field */
 216        PRB_CTRL_PROTOCOL       = (1 << 0), /* override def. ATA protocol */
 217        PRB_CTRL_PACKET_READ    = (1 << 4), /* PACKET cmd read */
 218        PRB_CTRL_PACKET_WRITE   = (1 << 5), /* PACKET cmd write */
 219        PRB_CTRL_NIEN           = (1 << 6), /* Mask completion irq */
 220        PRB_CTRL_SRST           = (1 << 7), /* Soft reset request (ign BSY?) */
 221
 222        /* PRB protocol field */
 223        PRB_PROT_PACKET         = (1 << 0),
 224        PRB_PROT_TCQ            = (1 << 1),
 225        PRB_PROT_NCQ            = (1 << 2),
 226        PRB_PROT_READ           = (1 << 3),
 227        PRB_PROT_WRITE          = (1 << 4),
 228        PRB_PROT_TRANSPARENT    = (1 << 5),
 229
 230        /*
 231         * Other constants
 232         */
 233        SGE_TRM                 = (1 << 31), /* Last SGE in chain */
 234        SGE_LNK                 = (1 << 30), /* linked list
 235                                                Points to SGT, not SGE */
 236        SGE_DRD                 = (1 << 29), /* discard data read (/dev/null)
 237                                                data address ignored */
 238
 239        SIL24_MAX_CMDS          = 31,
 240
 241        /* board id */
 242        BID_SIL3124             = 0,
 243        BID_SIL3132             = 1,
 244        BID_SIL3131             = 2,
 245
 246        /* host flags */
 247        SIL24_COMMON_FLAGS      = ATA_FLAG_SATA | ATA_FLAG_PIO_DMA |
 248                                  ATA_FLAG_NCQ | ATA_FLAG_ACPI_SATA |
 249                                  ATA_FLAG_AN | ATA_FLAG_PMP,
 250        SIL24_FLAG_PCIX_IRQ_WOC = (1 << 24), /* IRQ loss errata on PCI-X */
 251
 252        IRQ_STAT_4PORTS         = 0xf,
 253};
 254
 255struct sil24_ata_block {
 256        struct sil24_prb prb;
 257        struct sil24_sge sge[SIL24_MAX_SGE];
 258};
 259
 260struct sil24_atapi_block {
 261        struct sil24_prb prb;
 262        u8 cdb[16];
 263        struct sil24_sge sge[SIL24_MAX_SGE];
 264};
 265
 266union sil24_cmd_block {
 267        struct sil24_ata_block ata;
 268        struct sil24_atapi_block atapi;
 269};
 270
 271static const struct sil24_cerr_info {
 272        unsigned int err_mask, action;
 273        const char *desc;
 274} sil24_cerr_db[] = {
 275        [0]                     = { AC_ERR_DEV, 0,
 276                                    "device error" },
 277        [PORT_CERR_DEV]         = { AC_ERR_DEV, 0,
 278                                    "device error via D2H FIS" },
 279        [PORT_CERR_SDB]         = { AC_ERR_DEV, 0,
 280                                    "device error via SDB FIS" },
 281        [PORT_CERR_DATA]        = { AC_ERR_ATA_BUS, ATA_EH_RESET,
 282                                    "error in data FIS" },
 283        [PORT_CERR_SEND]        = { AC_ERR_ATA_BUS, ATA_EH_RESET,
 284                                    "failed to transmit command FIS" },
 285        [PORT_CERR_INCONSISTENT] = { AC_ERR_HSM, ATA_EH_RESET,
 286                                     "protocol mismatch" },
 287        [PORT_CERR_DIRECTION]   = { AC_ERR_HSM, ATA_EH_RESET,
 288                                    "data direction mismatch" },
 289        [PORT_CERR_UNDERRUN]    = { AC_ERR_HSM, ATA_EH_RESET,
 290                                    "ran out of SGEs while writing" },
 291        [PORT_CERR_OVERRUN]     = { AC_ERR_HSM, ATA_EH_RESET,
 292                                    "ran out of SGEs while reading" },
 293        [PORT_CERR_PKT_PROT]    = { AC_ERR_HSM, ATA_EH_RESET,
 294                                    "invalid data direction for ATAPI CDB" },
 295        [PORT_CERR_SGT_BOUNDARY] = { AC_ERR_SYSTEM, ATA_EH_RESET,
 296                                     "SGT not on qword boundary" },
 297        [PORT_CERR_SGT_TGTABRT] = { AC_ERR_HOST_BUS, ATA_EH_RESET,
 298                                    "PCI target abort while fetching SGT" },
 299        [PORT_CERR_SGT_MSTABRT] = { AC_ERR_HOST_BUS, ATA_EH_RESET,
 300                                    "PCI master abort while fetching SGT" },
 301        [PORT_CERR_SGT_PCIPERR] = { AC_ERR_HOST_BUS, ATA_EH_RESET,
 302                                    "PCI parity error while fetching SGT" },
 303        [PORT_CERR_CMD_BOUNDARY] = { AC_ERR_SYSTEM, ATA_EH_RESET,
 304                                     "PRB not on qword boundary" },
 305        [PORT_CERR_CMD_TGTABRT] = { AC_ERR_HOST_BUS, ATA_EH_RESET,
 306                                    "PCI target abort while fetching PRB" },
 307        [PORT_CERR_CMD_MSTABRT] = { AC_ERR_HOST_BUS, ATA_EH_RESET,
 308                                    "PCI master abort while fetching PRB" },
 309        [PORT_CERR_CMD_PCIPERR] = { AC_ERR_HOST_BUS, ATA_EH_RESET,
 310                                    "PCI parity error while fetching PRB" },
 311        [PORT_CERR_XFR_UNDEF]   = { AC_ERR_HOST_BUS, ATA_EH_RESET,
 312                                    "undefined error while transferring data" },
 313        [PORT_CERR_XFR_TGTABRT] = { AC_ERR_HOST_BUS, ATA_EH_RESET,
 314                                    "PCI target abort while transferring data" },
 315        [PORT_CERR_XFR_MSTABRT] = { AC_ERR_HOST_BUS, ATA_EH_RESET,
 316                                    "PCI master abort while transferring data" },
 317        [PORT_CERR_XFR_PCIPERR] = { AC_ERR_HOST_BUS, ATA_EH_RESET,
 318                                    "PCI parity error while transferring data" },
 319        [PORT_CERR_SENDSERVICE] = { AC_ERR_HSM, ATA_EH_RESET,
 320                                    "FIS received while sending service FIS" },
 321};
 322
 323/*
 324 * ap->private_data
 325 *
 326 * The preview driver always returned 0 for status.  We emulate it
 327 * here from the previous interrupt.
 328 */
 329struct sil24_port_priv {
 330        union sil24_cmd_block *cmd_block;       /* 32 cmd blocks */
 331        dma_addr_t cmd_block_dma;               /* DMA base addr for them */
 332        int do_port_rst;
 333};
 334
 335static void sil24_dev_config(struct ata_device *dev);
 336static int sil24_scr_read(struct ata_link *link, unsigned sc_reg, u32 *val);
 337static int sil24_scr_write(struct ata_link *link, unsigned sc_reg, u32 val);
 338static int sil24_qc_defer(struct ata_queued_cmd *qc);
 339static void sil24_qc_prep(struct ata_queued_cmd *qc);
 340static unsigned int sil24_qc_issue(struct ata_queued_cmd *qc);
 341static bool sil24_qc_fill_rtf(struct ata_queued_cmd *qc);
 342static void sil24_pmp_attach(struct ata_port *ap);
 343static void sil24_pmp_detach(struct ata_port *ap);
 344static void sil24_freeze(struct ata_port *ap);
 345static void sil24_thaw(struct ata_port *ap);
 346static int sil24_softreset(struct ata_link *link, unsigned int *class,
 347                           unsigned long deadline);
 348static int sil24_hardreset(struct ata_link *link, unsigned int *class,
 349                           unsigned long deadline);
 350static int sil24_pmp_hardreset(struct ata_link *link, unsigned int *class,
 351                               unsigned long deadline);
 352static void sil24_error_handler(struct ata_port *ap);
 353static void sil24_post_internal_cmd(struct ata_queued_cmd *qc);
 354static int sil24_port_start(struct ata_port *ap);
 355static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
 356#ifdef CONFIG_PM_SLEEP
 357static int sil24_pci_device_resume(struct pci_dev *pdev);
 358#endif
 359#ifdef CONFIG_PM
 360static int sil24_port_resume(struct ata_port *ap);
 361#endif
 362
 363static const struct pci_device_id sil24_pci_tbl[] = {
 364        { PCI_VDEVICE(CMD, 0x3124), BID_SIL3124 },
 365        { PCI_VDEVICE(INTEL, 0x3124), BID_SIL3124 },
 366        { PCI_VDEVICE(CMD, 0x3132), BID_SIL3132 },
 367        { PCI_VDEVICE(CMD, 0x0242), BID_SIL3132 },
 368        { PCI_VDEVICE(CMD, 0x0244), BID_SIL3132 },
 369        { PCI_VDEVICE(CMD, 0x3131), BID_SIL3131 },
 370        { PCI_VDEVICE(CMD, 0x3531), BID_SIL3131 },
 371
 372        { } /* terminate list */
 373};
 374
 375static struct pci_driver sil24_pci_driver = {
 376        .name                   = DRV_NAME,
 377        .id_table               = sil24_pci_tbl,
 378        .probe                  = sil24_init_one,
 379        .remove                 = ata_pci_remove_one,
 380#ifdef CONFIG_PM_SLEEP
 381        .suspend                = ata_pci_device_suspend,
 382        .resume                 = sil24_pci_device_resume,
 383#endif
 384};
 385
 386static struct scsi_host_template sil24_sht = {
 387        ATA_NCQ_SHT(DRV_NAME),
 388        .can_queue              = SIL24_MAX_CMDS,
 389        .sg_tablesize           = SIL24_MAX_SGE,
 390        .dma_boundary           = ATA_DMA_BOUNDARY,
 391        .tag_alloc_policy       = BLK_TAG_ALLOC_FIFO,
 392};
 393
 394static struct ata_port_operations sil24_ops = {
 395        .inherits               = &sata_pmp_port_ops,
 396
 397        .qc_defer               = sil24_qc_defer,
 398        .qc_prep                = sil24_qc_prep,
 399        .qc_issue               = sil24_qc_issue,
 400        .qc_fill_rtf            = sil24_qc_fill_rtf,
 401
 402        .freeze                 = sil24_freeze,
 403        .thaw                   = sil24_thaw,
 404        .softreset              = sil24_softreset,
 405        .hardreset              = sil24_hardreset,
 406        .pmp_softreset          = sil24_softreset,
 407        .pmp_hardreset          = sil24_pmp_hardreset,
 408        .error_handler          = sil24_error_handler,
 409        .post_internal_cmd      = sil24_post_internal_cmd,
 410        .dev_config             = sil24_dev_config,
 411
 412        .scr_read               = sil24_scr_read,
 413        .scr_write              = sil24_scr_write,
 414        .pmp_attach             = sil24_pmp_attach,
 415        .pmp_detach             = sil24_pmp_detach,
 416
 417        .port_start             = sil24_port_start,
 418#ifdef CONFIG_PM
 419        .port_resume            = sil24_port_resume,
 420#endif
 421};
 422
 423static bool sata_sil24_msi;    /* Disable MSI */
 424module_param_named(msi, sata_sil24_msi, bool, S_IRUGO);
 425MODULE_PARM_DESC(msi, "Enable MSI (Default: false)");
 426
 427/*
 428 * Use bits 30-31 of port_flags to encode available port numbers.
 429 * Current maxium is 4.
 430 */
 431#define SIL24_NPORTS2FLAG(nports)       ((((unsigned)(nports) - 1) & 0x3) << 30)
 432#define SIL24_FLAG2NPORTS(flag)         ((((flag) >> 30) & 0x3) + 1)
 433
 434static const struct ata_port_info sil24_port_info[] = {
 435        /* sil_3124 */
 436        {
 437                .flags          = SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(4) |
 438                                  SIL24_FLAG_PCIX_IRQ_WOC,
 439                .pio_mask       = ATA_PIO4,
 440                .mwdma_mask     = ATA_MWDMA2,
 441                .udma_mask      = ATA_UDMA5,
 442                .port_ops       = &sil24_ops,
 443        },
 444        /* sil_3132 */
 445        {
 446                .flags          = SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(2),
 447                .pio_mask       = ATA_PIO4,
 448                .mwdma_mask     = ATA_MWDMA2,
 449                .udma_mask      = ATA_UDMA5,
 450                .port_ops       = &sil24_ops,
 451        },
 452        /* sil_3131/sil_3531 */
 453        {
 454                .flags          = SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(1),
 455                .pio_mask       = ATA_PIO4,
 456                .mwdma_mask     = ATA_MWDMA2,
 457                .udma_mask      = ATA_UDMA5,
 458                .port_ops       = &sil24_ops,
 459        },
 460};
 461
 462static int sil24_tag(int tag)
 463{
 464        if (unlikely(ata_tag_internal(tag)))
 465                return 0;
 466        return tag;
 467}
 468
 469static unsigned long sil24_port_offset(struct ata_port *ap)
 470{
 471        return ap->port_no * PORT_REGS_SIZE;
 472}
 473
 474static void __iomem *sil24_port_base(struct ata_port *ap)
 475{
 476        return ap->host->iomap[SIL24_PORT_BAR] + sil24_port_offset(ap);
 477}
 478
 479static void sil24_dev_config(struct ata_device *dev)
 480{
 481        void __iomem *port = sil24_port_base(dev->link->ap);
 482
 483        if (dev->cdb_len == 16)
 484                writel(PORT_CS_CDB16, port + PORT_CTRL_STAT);
 485        else
 486                writel(PORT_CS_CDB16, port + PORT_CTRL_CLR);
 487}
 488
 489static void sil24_read_tf(struct ata_port *ap, int tag, struct ata_taskfile *tf)
 490{
 491        void __iomem *port = sil24_port_base(ap);
 492        struct sil24_prb __iomem *prb;
 493        u8 fis[6 * 4];
 494
 495        prb = port + PORT_LRAM + sil24_tag(tag) * PORT_LRAM_SLOT_SZ;
 496        memcpy_fromio(fis, prb->fis, sizeof(fis));
 497        ata_tf_from_fis(fis, tf);
 498}
 499
 500static int sil24_scr_map[] = {
 501        [SCR_CONTROL]   = 0,
 502        [SCR_STATUS]    = 1,
 503        [SCR_ERROR]     = 2,
 504        [SCR_ACTIVE]    = 3,
 505};
 506
 507static int sil24_scr_read(struct ata_link *link, unsigned sc_reg, u32 *val)
 508{
 509        void __iomem *scr_addr = sil24_port_base(link->ap) + PORT_SCONTROL;
 510
 511        if (sc_reg < ARRAY_SIZE(sil24_scr_map)) {
 512                *val = readl(scr_addr + sil24_scr_map[sc_reg] * 4);
 513                return 0;
 514        }
 515        return -EINVAL;
 516}
 517
 518static int sil24_scr_write(struct ata_link *link, unsigned sc_reg, u32 val)
 519{
 520        void __iomem *scr_addr = sil24_port_base(link->ap) + PORT_SCONTROL;
 521
 522        if (sc_reg < ARRAY_SIZE(sil24_scr_map)) {
 523                writel(val, scr_addr + sil24_scr_map[sc_reg] * 4);
 524                return 0;
 525        }
 526        return -EINVAL;
 527}
 528
 529static void sil24_config_port(struct ata_port *ap)
 530{
 531        void __iomem *port = sil24_port_base(ap);
 532
 533        /* configure IRQ WoC */
 534        if (ap->flags & SIL24_FLAG_PCIX_IRQ_WOC)
 535                writel(PORT_CS_IRQ_WOC, port + PORT_CTRL_STAT);
 536        else
 537                writel(PORT_CS_IRQ_WOC, port + PORT_CTRL_CLR);
 538
 539        /* zero error counters. */
 540        writew(0x8000, port + PORT_DECODE_ERR_THRESH);
 541        writew(0x8000, port + PORT_CRC_ERR_THRESH);
 542        writew(0x8000, port + PORT_HSHK_ERR_THRESH);
 543        writew(0x0000, port + PORT_DECODE_ERR_CNT);
 544        writew(0x0000, port + PORT_CRC_ERR_CNT);
 545        writew(0x0000, port + PORT_HSHK_ERR_CNT);
 546
 547        /* always use 64bit activation */
 548        writel(PORT_CS_32BIT_ACTV, port + PORT_CTRL_CLR);
 549
 550        /* clear port multiplier enable and resume bits */
 551        writel(PORT_CS_PMP_EN | PORT_CS_PMP_RESUME, port + PORT_CTRL_CLR);
 552}
 553
 554static void sil24_config_pmp(struct ata_port *ap, int attached)
 555{
 556        void __iomem *port = sil24_port_base(ap);
 557
 558        if (attached)
 559                writel(PORT_CS_PMP_EN, port + PORT_CTRL_STAT);
 560        else
 561                writel(PORT_CS_PMP_EN, port + PORT_CTRL_CLR);
 562}
 563
 564static void sil24_clear_pmp(struct ata_port *ap)
 565{
 566        void __iomem *port = sil24_port_base(ap);
 567        int i;
 568
 569        writel(PORT_CS_PMP_RESUME, port + PORT_CTRL_CLR);
 570
 571        for (i = 0; i < SATA_PMP_MAX_PORTS; i++) {
 572                void __iomem *pmp_base = port + PORT_PMP + i * PORT_PMP_SIZE;
 573
 574                writel(0, pmp_base + PORT_PMP_STATUS);
 575                writel(0, pmp_base + PORT_PMP_QACTIVE);
 576        }
 577}
 578
 579static int sil24_init_port(struct ata_port *ap)
 580{
 581        void __iomem *port = sil24_port_base(ap);
 582        struct sil24_port_priv *pp = ap->private_data;
 583        u32 tmp;
 584
 585        /* clear PMP error status */
 586        if (sata_pmp_attached(ap))
 587                sil24_clear_pmp(ap);
 588
 589        writel(PORT_CS_INIT, port + PORT_CTRL_STAT);
 590        ata_wait_register(ap, port + PORT_CTRL_STAT,
 591                          PORT_CS_INIT, PORT_CS_INIT, 10, 100);
 592        tmp = ata_wait_register(ap, port + PORT_CTRL_STAT,
 593                                PORT_CS_RDY, 0, 10, 100);
 594
 595        if ((tmp & (PORT_CS_INIT | PORT_CS_RDY)) != PORT_CS_RDY) {
 596                pp->do_port_rst = 1;
 597                ap->link.eh_context.i.action |= ATA_EH_RESET;
 598                return -EIO;
 599        }
 600
 601        return 0;
 602}
 603
 604static int sil24_exec_polled_cmd(struct ata_port *ap, int pmp,
 605                                 const struct ata_taskfile *tf,
 606                                 int is_cmd, u32 ctrl,
 607                                 unsigned long timeout_msec)
 608{
 609        void __iomem *port = sil24_port_base(ap);
 610        struct sil24_port_priv *pp = ap->private_data;
 611        struct sil24_prb *prb = &pp->cmd_block[0].ata.prb;
 612        dma_addr_t paddr = pp->cmd_block_dma;
 613        u32 irq_enabled, irq_mask, irq_stat;
 614        int rc;
 615
 616        prb->ctrl = cpu_to_le16(ctrl);
 617        ata_tf_to_fis(tf, pmp, is_cmd, prb->fis);
 618
 619        /* temporarily plug completion and error interrupts */
 620        irq_enabled = readl(port + PORT_IRQ_ENABLE_SET);
 621        writel(PORT_IRQ_COMPLETE | PORT_IRQ_ERROR, port + PORT_IRQ_ENABLE_CLR);
 622
 623        /*
 624         * The barrier is required to ensure that writes to cmd_block reach
 625         * the memory before the write to PORT_CMD_ACTIVATE.
 626         */
 627        wmb();
 628        writel((u32)paddr, port + PORT_CMD_ACTIVATE);
 629        writel((u64)paddr >> 32, port + PORT_CMD_ACTIVATE + 4);
 630
 631        irq_mask = (PORT_IRQ_COMPLETE | PORT_IRQ_ERROR) << PORT_IRQ_RAW_SHIFT;
 632        irq_stat = ata_wait_register(ap, port + PORT_IRQ_STAT, irq_mask, 0x0,
 633                                     10, timeout_msec);
 634
 635        writel(irq_mask, port + PORT_IRQ_STAT); /* clear IRQs */
 636        irq_stat >>= PORT_IRQ_RAW_SHIFT;
 637
 638        if (irq_stat & PORT_IRQ_COMPLETE)
 639                rc = 0;
 640        else {
 641                /* force port into known state */
 642                sil24_init_port(ap);
 643
 644                if (irq_stat & PORT_IRQ_ERROR)
 645                        rc = -EIO;
 646                else
 647                        rc = -EBUSY;
 648        }
 649
 650        /* restore IRQ enabled */
 651        writel(irq_enabled, port + PORT_IRQ_ENABLE_SET);
 652
 653        return rc;
 654}
 655
 656static int sil24_softreset(struct ata_link *link, unsigned int *class,
 657                           unsigned long deadline)
 658{
 659        struct ata_port *ap = link->ap;
 660        int pmp = sata_srst_pmp(link);
 661        unsigned long timeout_msec = 0;
 662        struct ata_taskfile tf;
 663        const char *reason;
 664        int rc;
 665
 666        DPRINTK("ENTER\n");
 667
 668        /* put the port into known state */
 669        if (sil24_init_port(ap)) {
 670                reason = "port not ready";
 671                goto err;
 672        }
 673
 674        /* do SRST */
 675        if (time_after(deadline, jiffies))
 676                timeout_msec = jiffies_to_msecs(deadline - jiffies);
 677
 678        ata_tf_init(link->device, &tf); /* doesn't really matter */
 679        rc = sil24_exec_polled_cmd(ap, pmp, &tf, 0, PRB_CTRL_SRST,
 680                                   timeout_msec);
 681        if (rc == -EBUSY) {
 682                reason = "timeout";
 683                goto err;
 684        } else if (rc) {
 685                reason = "SRST command error";
 686                goto err;
 687        }
 688
 689        sil24_read_tf(ap, 0, &tf);
 690        *class = ata_dev_classify(&tf);
 691
 692        DPRINTK("EXIT, class=%u\n", *class);
 693        return 0;
 694
 695 err:
 696        ata_link_err(link, "softreset failed (%s)\n", reason);
 697        return -EIO;
 698}
 699
 700static int sil24_hardreset(struct ata_link *link, unsigned int *class,
 701                           unsigned long deadline)
 702{
 703        struct ata_port *ap = link->ap;
 704        void __iomem *port = sil24_port_base(ap);
 705        struct sil24_port_priv *pp = ap->private_data;
 706        int did_port_rst = 0;
 707        const char *reason;
 708        int tout_msec, rc;
 709        u32 tmp;
 710
 711 retry:
 712        /* Sometimes, DEV_RST is not enough to recover the controller.
 713         * This happens often after PM DMA CS errata.
 714         */
 715        if (pp->do_port_rst) {
 716                ata_port_warn(ap,
 717                              "controller in dubious state, performing PORT_RST\n");
 718
 719                writel(PORT_CS_PORT_RST, port + PORT_CTRL_STAT);
 720                ata_msleep(ap, 10);
 721                writel(PORT_CS_PORT_RST, port + PORT_CTRL_CLR);
 722                ata_wait_register(ap, port + PORT_CTRL_STAT, PORT_CS_RDY, 0,
 723                                  10, 5000);
 724
 725                /* restore port configuration */
 726                sil24_config_port(ap);
 727                sil24_config_pmp(ap, ap->nr_pmp_links);
 728
 729                pp->do_port_rst = 0;
 730                did_port_rst = 1;
 731        }
 732
 733        /* sil24 does the right thing(tm) without any protection */
 734        sata_set_spd(link);
 735
 736        tout_msec = 100;
 737        if (ata_link_online(link))
 738                tout_msec = 5000;
 739
 740        writel(PORT_CS_DEV_RST, port + PORT_CTRL_STAT);
 741        tmp = ata_wait_register(ap, port + PORT_CTRL_STAT,
 742                                PORT_CS_DEV_RST, PORT_CS_DEV_RST, 10,
 743                                tout_msec);
 744
 745        /* SStatus oscillates between zero and valid status after
 746         * DEV_RST, debounce it.
 747         */
 748        rc = sata_link_debounce(link, sata_deb_timing_long, deadline);
 749        if (rc) {
 750                reason = "PHY debouncing failed";
 751                goto err;
 752        }
 753
 754        if (tmp & PORT_CS_DEV_RST) {
 755                if (ata_link_offline(link))
 756                        return 0;
 757                reason = "link not ready";
 758                goto err;
 759        }
 760
 761        /* Sil24 doesn't store signature FIS after hardreset, so we
 762         * can't wait for BSY to clear.  Some devices take a long time
 763         * to get ready and those devices will choke if we don't wait
 764         * for BSY clearance here.  Tell libata to perform follow-up
 765         * softreset.
 766         */
 767        return -EAGAIN;
 768
 769 err:
 770        if (!did_port_rst) {
 771                pp->do_port_rst = 1;
 772                goto retry;
 773        }
 774
 775        ata_link_err(link, "hardreset failed (%s)\n", reason);
 776        return -EIO;
 777}
 778
 779static inline void sil24_fill_sg(struct ata_queued_cmd *qc,
 780                                 struct sil24_sge *sge)
 781{
 782        struct scatterlist *sg;
 783        struct sil24_sge *last_sge = NULL;
 784        unsigned int si;
 785
 786        for_each_sg(qc->sg, sg, qc->n_elem, si) {
 787                sge->addr = cpu_to_le64(sg_dma_address(sg));
 788                sge->cnt = cpu_to_le32(sg_dma_len(sg));
 789                sge->flags = 0;
 790
 791                last_sge = sge;
 792                sge++;
 793        }
 794
 795        last_sge->flags = cpu_to_le32(SGE_TRM);
 796}
 797
 798static int sil24_qc_defer(struct ata_queued_cmd *qc)
 799{
 800        struct ata_link *link = qc->dev->link;
 801        struct ata_port *ap = link->ap;
 802        u8 prot = qc->tf.protocol;
 803
 804        /*
 805         * There is a bug in the chip:
 806         * Port LRAM Causes the PRB/SGT Data to be Corrupted
 807         * If the host issues a read request for LRAM and SActive registers
 808         * while active commands are available in the port, PRB/SGT data in
 809         * the LRAM can become corrupted. This issue applies only when
 810         * reading from, but not writing to, the LRAM.
 811         *
 812         * Therefore, reading LRAM when there is no particular error [and
 813         * other commands may be outstanding] is prohibited.
 814         *
 815         * To avoid this bug there are two situations where a command must run
 816         * exclusive of any other commands on the port:
 817         *
 818         * - ATAPI commands which check the sense data
 819         * - Passthrough ATA commands which always have ATA_QCFLAG_RESULT_TF
 820         *   set.
 821         *
 822         */
 823        int is_excl = (ata_is_atapi(prot) ||
 824                       (qc->flags & ATA_QCFLAG_RESULT_TF));
 825
 826        if (unlikely(ap->excl_link)) {
 827                if (link == ap->excl_link) {
 828                        if (ap->nr_active_links)
 829                                return ATA_DEFER_PORT;
 830                        qc->flags |= ATA_QCFLAG_CLEAR_EXCL;
 831                } else
 832                        return ATA_DEFER_PORT;
 833        } else if (unlikely(is_excl)) {
 834                ap->excl_link = link;
 835                if (ap->nr_active_links)
 836                        return ATA_DEFER_PORT;
 837                qc->flags |= ATA_QCFLAG_CLEAR_EXCL;
 838        }
 839
 840        return ata_std_qc_defer(qc);
 841}
 842
 843static void sil24_qc_prep(struct ata_queued_cmd *qc)
 844{
 845        struct ata_port *ap = qc->ap;
 846        struct sil24_port_priv *pp = ap->private_data;
 847        union sil24_cmd_block *cb;
 848        struct sil24_prb *prb;
 849        struct sil24_sge *sge;
 850        u16 ctrl = 0;
 851
 852        cb = &pp->cmd_block[sil24_tag(qc->hw_tag)];
 853
 854        if (!ata_is_atapi(qc->tf.protocol)) {
 855                prb = &cb->ata.prb;
 856                sge = cb->ata.sge;
 857                if (ata_is_data(qc->tf.protocol)) {
 858                        u16 prot = 0;
 859                        ctrl = PRB_CTRL_PROTOCOL;
 860                        if (ata_is_ncq(qc->tf.protocol))
 861                                prot |= PRB_PROT_NCQ;
 862                        if (qc->tf.flags & ATA_TFLAG_WRITE)
 863                                prot |= PRB_PROT_WRITE;
 864                        else
 865                                prot |= PRB_PROT_READ;
 866                        prb->prot = cpu_to_le16(prot);
 867                }
 868        } else {
 869                prb = &cb->atapi.prb;
 870                sge = cb->atapi.sge;
 871                memset(cb->atapi.cdb, 0, sizeof(cb->atapi.cdb));
 872                memcpy(cb->atapi.cdb, qc->cdb, qc->dev->cdb_len);
 873
 874                if (ata_is_data(qc->tf.protocol)) {
 875                        if (qc->tf.flags & ATA_TFLAG_WRITE)
 876                                ctrl = PRB_CTRL_PACKET_WRITE;
 877                        else
 878                                ctrl = PRB_CTRL_PACKET_READ;
 879                }
 880        }
 881
 882        prb->ctrl = cpu_to_le16(ctrl);
 883        ata_tf_to_fis(&qc->tf, qc->dev->link->pmp, 1, prb->fis);
 884
 885        if (qc->flags & ATA_QCFLAG_DMAMAP)
 886                sil24_fill_sg(qc, sge);
 887}
 888
 889static unsigned int sil24_qc_issue(struct ata_queued_cmd *qc)
 890{
 891        struct ata_port *ap = qc->ap;
 892        struct sil24_port_priv *pp = ap->private_data;
 893        void __iomem *port = sil24_port_base(ap);
 894        unsigned int tag = sil24_tag(qc->hw_tag);
 895        dma_addr_t paddr;
 896        void __iomem *activate;
 897
 898        paddr = pp->cmd_block_dma + tag * sizeof(*pp->cmd_block);
 899        activate = port + PORT_CMD_ACTIVATE + tag * 8;
 900
 901        /*
 902         * The barrier is required to ensure that writes to cmd_block reach
 903         * the memory before the write to PORT_CMD_ACTIVATE.
 904         */
 905        wmb();
 906        writel((u32)paddr, activate);
 907        writel((u64)paddr >> 32, activate + 4);
 908
 909        return 0;
 910}
 911
 912static bool sil24_qc_fill_rtf(struct ata_queued_cmd *qc)
 913{
 914        sil24_read_tf(qc->ap, qc->hw_tag, &qc->result_tf);
 915        return true;
 916}
 917
 918static void sil24_pmp_attach(struct ata_port *ap)
 919{
 920        u32 *gscr = ap->link.device->gscr;
 921
 922        sil24_config_pmp(ap, 1);
 923        sil24_init_port(ap);
 924
 925        if (sata_pmp_gscr_vendor(gscr) == 0x11ab &&
 926            sata_pmp_gscr_devid(gscr) == 0x4140) {
 927                ata_port_info(ap,
 928                        "disabling NCQ support due to sil24-mv4140 quirk\n");
 929                ap->flags &= ~ATA_FLAG_NCQ;
 930        }
 931}
 932
 933static void sil24_pmp_detach(struct ata_port *ap)
 934{
 935        sil24_init_port(ap);
 936        sil24_config_pmp(ap, 0);
 937
 938        ap->flags |= ATA_FLAG_NCQ;
 939}
 940
 941static int sil24_pmp_hardreset(struct ata_link *link, unsigned int *class,
 942                               unsigned long deadline)
 943{
 944        int rc;
 945
 946        rc = sil24_init_port(link->ap);
 947        if (rc) {
 948                ata_link_err(link, "hardreset failed (port not ready)\n");
 949                return rc;
 950        }
 951
 952        return sata_std_hardreset(link, class, deadline);
 953}
 954
 955static void sil24_freeze(struct ata_port *ap)
 956{
 957        void __iomem *port = sil24_port_base(ap);
 958
 959        /* Port-wide IRQ mask in HOST_CTRL doesn't really work, clear
 960         * PORT_IRQ_ENABLE instead.
 961         */
 962        writel(0xffff, port + PORT_IRQ_ENABLE_CLR);
 963}
 964
 965static void sil24_thaw(struct ata_port *ap)
 966{
 967        void __iomem *port = sil24_port_base(ap);
 968        u32 tmp;
 969
 970        /* clear IRQ */
 971        tmp = readl(port + PORT_IRQ_STAT);
 972        writel(tmp, port + PORT_IRQ_STAT);
 973
 974        /* turn IRQ back on */
 975        writel(DEF_PORT_IRQ, port + PORT_IRQ_ENABLE_SET);
 976}
 977
 978static void sil24_error_intr(struct ata_port *ap)
 979{
 980        void __iomem *port = sil24_port_base(ap);
 981        struct sil24_port_priv *pp = ap->private_data;
 982        struct ata_queued_cmd *qc = NULL;
 983        struct ata_link *link;
 984        struct ata_eh_info *ehi;
 985        int abort = 0, freeze = 0;
 986        u32 irq_stat;
 987
 988        /* on error, we need to clear IRQ explicitly */
 989        irq_stat = readl(port + PORT_IRQ_STAT);
 990        writel(irq_stat, port + PORT_IRQ_STAT);
 991
 992        /* first, analyze and record host port events */
 993        link = &ap->link;
 994        ehi = &link->eh_info;
 995        ata_ehi_clear_desc(ehi);
 996
 997        ata_ehi_push_desc(ehi, "irq_stat 0x%08x", irq_stat);
 998
 999        if (irq_stat & PORT_IRQ_SDB_NOTIFY) {
1000                ata_ehi_push_desc(ehi, "SDB notify");
1001                sata_async_notification(ap);
1002        }
1003
1004        if (irq_stat & (PORT_IRQ_PHYRDY_CHG | PORT_IRQ_DEV_XCHG)) {
1005                ata_ehi_hotplugged(ehi);
1006                ata_ehi_push_desc(ehi, "%s",
1007                                  irq_stat & PORT_IRQ_PHYRDY_CHG ?
1008                                  "PHY RDY changed" : "device exchanged");
1009                freeze = 1;
1010        }
1011
1012        if (irq_stat & PORT_IRQ_UNK_FIS) {
1013                ehi->err_mask |= AC_ERR_HSM;
1014                ehi->action |= ATA_EH_RESET;
1015                ata_ehi_push_desc(ehi, "unknown FIS");
1016                freeze = 1;
1017        }
1018
1019        /* deal with command error */
1020        if (irq_stat & PORT_IRQ_ERROR) {
1021                const struct sil24_cerr_info *ci = NULL;
1022                unsigned int err_mask = 0, action = 0;
1023                u32 context, cerr;
1024                int pmp;
1025
1026                abort = 1;
1027
1028                /* DMA Context Switch Failure in Port Multiplier Mode
1029                 * errata.  If we have active commands to 3 or more
1030                 * devices, any error condition on active devices can
1031                 * corrupt DMA context switching.
1032                 */
1033                if (ap->nr_active_links >= 3) {
1034                        ehi->err_mask |= AC_ERR_OTHER;
1035                        ehi->action |= ATA_EH_RESET;
1036                        ata_ehi_push_desc(ehi, "PMP DMA CS errata");
1037                        pp->do_port_rst = 1;
1038                        freeze = 1;
1039                }
1040
1041                /* find out the offending link and qc */
1042                if (sata_pmp_attached(ap)) {
1043                        context = readl(port + PORT_CONTEXT);
1044                        pmp = (context >> 5) & 0xf;
1045
1046                        if (pmp < ap->nr_pmp_links) {
1047                                link = &ap->pmp_link[pmp];
1048                                ehi = &link->eh_info;
1049                                qc = ata_qc_from_tag(ap, link->active_tag);
1050
1051                                ata_ehi_clear_desc(ehi);
1052                                ata_ehi_push_desc(ehi, "irq_stat 0x%08x",
1053                                                  irq_stat);
1054                        } else {
1055                                err_mask |= AC_ERR_HSM;
1056                                action |= ATA_EH_RESET;
1057                                freeze = 1;
1058                        }
1059                } else
1060                        qc = ata_qc_from_tag(ap, link->active_tag);
1061
1062                /* analyze CMD_ERR */
1063                cerr = readl(port + PORT_CMD_ERR);
1064                if (cerr < ARRAY_SIZE(sil24_cerr_db))
1065                        ci = &sil24_cerr_db[cerr];
1066
1067                if (ci && ci->desc) {
1068                        err_mask |= ci->err_mask;
1069                        action |= ci->action;
1070                        if (action & ATA_EH_RESET)
1071                                freeze = 1;
1072                        ata_ehi_push_desc(ehi, "%s", ci->desc);
1073                } else {
1074                        err_mask |= AC_ERR_OTHER;
1075                        action |= ATA_EH_RESET;
1076                        freeze = 1;
1077                        ata_ehi_push_desc(ehi, "unknown command error %d",
1078                                          cerr);
1079                }
1080
1081                /* record error info */
1082                if (qc)
1083                        qc->err_mask |= err_mask;
1084                else
1085                        ehi->err_mask |= err_mask;
1086
1087                ehi->action |= action;
1088
1089                /* if PMP, resume */
1090                if (sata_pmp_attached(ap))
1091                        writel(PORT_CS_PMP_RESUME, port + PORT_CTRL_STAT);
1092        }
1093
1094        /* freeze or abort */
1095        if (freeze)
1096                ata_port_freeze(ap);
1097        else if (abort) {
1098                if (qc)
1099                        ata_link_abort(qc->dev->link);
1100                else
1101                        ata_port_abort(ap);
1102        }
1103}
1104
1105static inline void sil24_host_intr(struct ata_port *ap)
1106{
1107        void __iomem *port = sil24_port_base(ap);
1108        u32 slot_stat, qc_active;
1109        int rc;
1110
1111        /* If PCIX_IRQ_WOC, there's an inherent race window between
1112         * clearing IRQ pending status and reading PORT_SLOT_STAT
1113         * which may cause spurious interrupts afterwards.  This is
1114         * unavoidable and much better than losing interrupts which
1115         * happens if IRQ pending is cleared after reading
1116         * PORT_SLOT_STAT.
1117         */
1118        if (ap->flags & SIL24_FLAG_PCIX_IRQ_WOC)
1119                writel(PORT_IRQ_COMPLETE, port + PORT_IRQ_STAT);
1120
1121        slot_stat = readl(port + PORT_SLOT_STAT);
1122
1123        if (unlikely(slot_stat & HOST_SSTAT_ATTN)) {
1124                sil24_error_intr(ap);
1125                return;
1126        }
1127
1128        qc_active = slot_stat & ~HOST_SSTAT_ATTN;
1129        rc = ata_qc_complete_multiple(ap, qc_active);
1130        if (rc > 0)
1131                return;
1132        if (rc < 0) {
1133                struct ata_eh_info *ehi = &ap->link.eh_info;
1134                ehi->err_mask |= AC_ERR_HSM;
1135                ehi->action |= ATA_EH_RESET;
1136                ata_port_freeze(ap);
1137                return;
1138        }
1139
1140        /* spurious interrupts are expected if PCIX_IRQ_WOC */
1141        if (!(ap->flags & SIL24_FLAG_PCIX_IRQ_WOC) && ata_ratelimit())
1142                ata_port_info(ap,
1143                        "spurious interrupt (slot_stat 0x%x active_tag %d sactive 0x%x)\n",
1144                        slot_stat, ap->link.active_tag, ap->link.sactive);
1145}
1146
1147static irqreturn_t sil24_interrupt(int irq, void *dev_instance)
1148{
1149        struct ata_host *host = dev_instance;
1150        void __iomem *host_base = host->iomap[SIL24_HOST_BAR];
1151        unsigned handled = 0;
1152        u32 status;
1153        int i;
1154
1155        status = readl(host_base + HOST_IRQ_STAT);
1156
1157        if (status == 0xffffffff) {
1158                dev_err(host->dev, "IRQ status == 0xffffffff, "
1159                        "PCI fault or device removal?\n");
1160                goto out;
1161        }
1162
1163        if (!(status & IRQ_STAT_4PORTS))
1164                goto out;
1165
1166        spin_lock(&host->lock);
1167
1168        for (i = 0; i < host->n_ports; i++)
1169                if (status & (1 << i)) {
1170                        sil24_host_intr(host->ports[i]);
1171                        handled++;
1172                }
1173
1174        spin_unlock(&host->lock);
1175 out:
1176        return IRQ_RETVAL(handled);
1177}
1178
1179static void sil24_error_handler(struct ata_port *ap)
1180{
1181        struct sil24_port_priv *pp = ap->private_data;
1182
1183        if (sil24_init_port(ap))
1184                ata_eh_freeze_port(ap);
1185
1186        sata_pmp_error_handler(ap);
1187
1188        pp->do_port_rst = 0;
1189}
1190
1191static void sil24_post_internal_cmd(struct ata_queued_cmd *qc)
1192{
1193        struct ata_port *ap = qc->ap;
1194
1195        /* make DMA engine forget about the failed command */
1196        if ((qc->flags & ATA_QCFLAG_FAILED) && sil24_init_port(ap))
1197                ata_eh_freeze_port(ap);
1198}
1199
1200static int sil24_port_start(struct ata_port *ap)
1201{
1202        struct device *dev = ap->host->dev;
1203        struct sil24_port_priv *pp;
1204        union sil24_cmd_block *cb;
1205        size_t cb_size = sizeof(*cb) * SIL24_MAX_CMDS;
1206        dma_addr_t cb_dma;
1207
1208        pp = devm_kzalloc(dev, sizeof(*pp), GFP_KERNEL);
1209        if (!pp)
1210                return -ENOMEM;
1211
1212        cb = dmam_alloc_coherent(dev, cb_size, &cb_dma, GFP_KERNEL);
1213        if (!cb)
1214                return -ENOMEM;
1215        memset(cb, 0, cb_size);
1216
1217        pp->cmd_block = cb;
1218        pp->cmd_block_dma = cb_dma;
1219
1220        ap->private_data = pp;
1221
1222        ata_port_pbar_desc(ap, SIL24_HOST_BAR, -1, "host");
1223        ata_port_pbar_desc(ap, SIL24_PORT_BAR, sil24_port_offset(ap), "port");
1224
1225        return 0;
1226}
1227
1228static void sil24_init_controller(struct ata_host *host)
1229{
1230        void __iomem *host_base = host->iomap[SIL24_HOST_BAR];
1231        u32 tmp;
1232        int i;
1233
1234        /* GPIO off */
1235        writel(0, host_base + HOST_FLASH_CMD);
1236
1237        /* clear global reset & mask interrupts during initialization */
1238        writel(0, host_base + HOST_CTRL);
1239
1240        /* init ports */
1241        for (i = 0; i < host->n_ports; i++) {
1242                struct ata_port *ap = host->ports[i];
1243                void __iomem *port = sil24_port_base(ap);
1244
1245
1246                /* Initial PHY setting */
1247                writel(0x20c, port + PORT_PHY_CFG);
1248
1249                /* Clear port RST */
1250                tmp = readl(port + PORT_CTRL_STAT);
1251                if (tmp & PORT_CS_PORT_RST) {
1252                        writel(PORT_CS_PORT_RST, port + PORT_CTRL_CLR);
1253                        tmp = ata_wait_register(NULL, port + PORT_CTRL_STAT,
1254                                                PORT_CS_PORT_RST,
1255                                                PORT_CS_PORT_RST, 10, 100);
1256                        if (tmp & PORT_CS_PORT_RST)
1257                                dev_err(host->dev,
1258                                        "failed to clear port RST\n");
1259                }
1260
1261                /* configure port */
1262                sil24_config_port(ap);
1263        }
1264
1265        /* Turn on interrupts */
1266        writel(IRQ_STAT_4PORTS, host_base + HOST_CTRL);
1267}
1268
1269static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
1270{
1271        extern int __MARKER__sil24_cmd_block_is_sized_wrongly;
1272        struct ata_port_info pi = sil24_port_info[ent->driver_data];
1273        const struct ata_port_info *ppi[] = { &pi, NULL };
1274        void __iomem * const *iomap;
1275        struct ata_host *host;
1276        int rc;
1277        u32 tmp;
1278
1279        /* cause link error if sil24_cmd_block is sized wrongly */
1280        if (sizeof(union sil24_cmd_block) != PAGE_SIZE)
1281                __MARKER__sil24_cmd_block_is_sized_wrongly = 1;
1282
1283        ata_print_version_once(&pdev->dev, DRV_VERSION);
1284
1285        /* acquire resources */
1286        rc = pcim_enable_device(pdev);
1287        if (rc)
1288                return rc;
1289
1290        rc = pcim_iomap_regions(pdev,
1291                                (1 << SIL24_HOST_BAR) | (1 << SIL24_PORT_BAR),
1292                                DRV_NAME);
1293        if (rc)
1294                return rc;
1295        iomap = pcim_iomap_table(pdev);
1296
1297        /* apply workaround for completion IRQ loss on PCI-X errata */
1298        if (pi.flags & SIL24_FLAG_PCIX_IRQ_WOC) {
1299                tmp = readl(iomap[SIL24_HOST_BAR] + HOST_CTRL);
1300                if (tmp & (HOST_CTRL_TRDY | HOST_CTRL_STOP | HOST_CTRL_DEVSEL))
1301                        dev_info(&pdev->dev,
1302                                 "Applying completion IRQ loss on PCI-X errata fix\n");
1303                else
1304                        pi.flags &= ~SIL24_FLAG_PCIX_IRQ_WOC;
1305        }
1306
1307        /* allocate and fill host */
1308        host = ata_host_alloc_pinfo(&pdev->dev, ppi,
1309                                    SIL24_FLAG2NPORTS(ppi[0]->flags));
1310        if (!host)
1311                return -ENOMEM;
1312        host->iomap = iomap;
1313
1314        /* configure and activate the device */
1315        if (!dma_set_mask(&pdev->dev, DMA_BIT_MASK(64))) {
1316                rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64));
1317                if (rc) {
1318                        rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
1319                        if (rc) {
1320                                dev_err(&pdev->dev,
1321                                        "64-bit DMA enable failed\n");
1322                                return rc;
1323                        }
1324                }
1325        } else {
1326                rc = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
1327                if (rc) {
1328                        dev_err(&pdev->dev, "32-bit DMA enable failed\n");
1329                        return rc;
1330                }
1331                rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
1332                if (rc) {
1333                        dev_err(&pdev->dev,
1334                                "32-bit consistent DMA enable failed\n");
1335                        return rc;
1336                }
1337        }
1338
1339        /* Set max read request size to 4096.  This slightly increases
1340         * write throughput for pci-e variants.
1341         */
1342        pcie_set_readrq(pdev, 4096);
1343
1344        sil24_init_controller(host);
1345
1346        if (sata_sil24_msi && !pci_enable_msi(pdev)) {
1347                dev_info(&pdev->dev, "Using MSI\n");
1348                pci_intx(pdev, 0);
1349        }
1350
1351        pci_set_master(pdev);
1352        return ata_host_activate(host, pdev->irq, sil24_interrupt, IRQF_SHARED,
1353                                 &sil24_sht);
1354}
1355
1356#ifdef CONFIG_PM_SLEEP
1357static int sil24_pci_device_resume(struct pci_dev *pdev)
1358{
1359        struct ata_host *host = pci_get_drvdata(pdev);
1360        void __iomem *host_base = host->iomap[SIL24_HOST_BAR];
1361        int rc;
1362
1363        rc = ata_pci_device_do_resume(pdev);
1364        if (rc)
1365                return rc;
1366
1367        if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND)
1368                writel(HOST_CTRL_GLOBAL_RST, host_base + HOST_CTRL);
1369
1370        sil24_init_controller(host);
1371
1372        ata_host_resume(host);
1373
1374        return 0;
1375}
1376#endif
1377
1378#ifdef CONFIG_PM
1379static int sil24_port_resume(struct ata_port *ap)
1380{
1381        sil24_config_pmp(ap, ap->nr_pmp_links);
1382        return 0;
1383}
1384#endif
1385
1386module_pci_driver(sil24_pci_driver);
1387
1388MODULE_AUTHOR("Tejun Heo");
1389MODULE_DESCRIPTION("Silicon Image 3124/3132 SATA low-level driver");
1390MODULE_LICENSE("GPL");
1391MODULE_DEVICE_TABLE(pci, sil24_pci_tbl);
1392