1 2/* 3 * This file contains defines for the 4 * Micro Memory MM5415 5 * family PCI Memory Module with Battery Backup. 6 * 7 * Copyright Micro Memory INC 2001. All rights reserved. 8 * Release under the terms of the GNU GENERAL PUBLIC LICENSE version 2. 9 * See the file COPYING. 10 */ 11 12#ifndef _DRIVERS_BLOCK_MM_H 13#define _DRIVERS_BLOCK_MM_H 14 15 16#define IRQ_TIMEOUT (1 * HZ) 17 18/* CSR register definition */ 19#define MEMCTRLSTATUS_MAGIC 0x00 20#define MM_MAGIC_VALUE (unsigned char)0x59 21 22#define MEMCTRLSTATUS_BATTERY 0x04 23#define BATTERY_1_DISABLED 0x01 24#define BATTERY_1_FAILURE 0x02 25#define BATTERY_2_DISABLED 0x04 26#define BATTERY_2_FAILURE 0x08 27 28#define MEMCTRLSTATUS_MEMORY 0x07 29#define MEM_128_MB 0xfe 30#define MEM_256_MB 0xfc 31#define MEM_512_MB 0xf8 32#define MEM_1_GB 0xf0 33#define MEM_2_GB 0xe0 34 35#define MEMCTRLCMD_LEDCTRL 0x08 36#define LED_REMOVE 2 37#define LED_FAULT 4 38#define LED_POWER 6 39#define LED_FLIP 255 40#define LED_OFF 0x00 41#define LED_ON 0x01 42#define LED_FLASH_3_5 0x02 43#define LED_FLASH_7_0 0x03 44#define LED_POWER_ON 0x00 45#define LED_POWER_OFF 0x01 46#define USER_BIT1 0x01 47#define USER_BIT2 0x02 48 49#define MEMORY_INITIALIZED USER_BIT1 50 51#define MEMCTRLCMD_ERRCTRL 0x0C 52#define EDC_NONE_DEFAULT 0x00 53#define EDC_NONE 0x01 54#define EDC_STORE_READ 0x02 55#define EDC_STORE_CORRECT 0x03 56 57#define MEMCTRLCMD_ERRCNT 0x0D 58#define MEMCTRLCMD_ERRSTATUS 0x0E 59 60#define ERROR_DATA_LOG 0x20 61#define ERROR_ADDR_LOG 0x28 62#define ERROR_COUNT 0x3D 63#define ERROR_SYNDROME 0x3E 64#define ERROR_CHECK 0x3F 65 66#define DMA_PCI_ADDR 0x40 67#define DMA_LOCAL_ADDR 0x48 68#define DMA_TRANSFER_SIZE 0x50 69#define DMA_DESCRIPTOR_ADDR 0x58 70#define DMA_SEMAPHORE_ADDR 0x60 71#define DMA_STATUS_CTRL 0x68 72#define DMASCR_GO 0x00001 73#define DMASCR_TRANSFER_READ 0x00002 74#define DMASCR_CHAIN_EN 0x00004 75#define DMASCR_SEM_EN 0x00010 76#define DMASCR_DMA_COMP_EN 0x00020 77#define DMASCR_CHAIN_COMP_EN 0x00040 78#define DMASCR_ERR_INT_EN 0x00080 79#define DMASCR_PARITY_INT_EN 0x00100 80#define DMASCR_ANY_ERR 0x00800 81#define DMASCR_MBE_ERR 0x01000 82#define DMASCR_PARITY_ERR_REP 0x02000 83#define DMASCR_PARITY_ERR_DET 0x04000 84#define DMASCR_SYSTEM_ERR_SIG 0x08000 85#define DMASCR_TARGET_ABT 0x10000 86#define DMASCR_MASTER_ABT 0x20000 87#define DMASCR_DMA_COMPLETE 0x40000 88#define DMASCR_CHAIN_COMPLETE 0x80000 89 90/* 913.SOME PCs HAVE HOST BRIDGES WHICH APPARENTLY DO NOT CORRECTLY HANDLE 92READ-LINE (0xE) OR READ-MULTIPLE (0xC) PCI COMMAND CODES DURING DMA 93TRANSFERS. IN OTHER SYSTEMS THESE COMMAND CODES WILL CAUSE THE HOST BRIDGE 94TO ALLOW LONGER BURSTS DURING DMA READ OPERATIONS. THE UPPER FOUR BITS 95(31..28) OF THE DMA CSR HAVE BEEN MADE PROGRAMMABLE, SO THAT EITHER A 0x6, 96AN 0xE OR A 0xC CAN BE WRITTEN TO THEM TO SET THE COMMAND CODE USED DURING 97DMA READ OPERATIONS. 98*/ 99#define DMASCR_READ 0x60000000 100#define DMASCR_READLINE 0xE0000000 101#define DMASCR_READMULTI 0xC0000000 102 103 104#define DMASCR_ERROR_MASK (DMASCR_MASTER_ABT | DMASCR_TARGET_ABT | DMASCR_SYSTEM_ERR_SIG | DMASCR_PARITY_ERR_DET | DMASCR_MBE_ERR | DMASCR_ANY_ERR) 105#define DMASCR_HARD_ERROR (DMASCR_MASTER_ABT | DMASCR_TARGET_ABT | DMASCR_SYSTEM_ERR_SIG | DMASCR_PARITY_ERR_DET | DMASCR_MBE_ERR) 106 107#define WINDOWMAP_WINNUM 0x7B 108 109#define DMA_READ_FROM_HOST 0 110#define DMA_WRITE_TO_HOST 1 111 112struct mm_dma_desc { 113 __le64 pci_addr; 114 __le64 local_addr; 115 __le32 transfer_size; 116 u32 zero1; 117 __le64 next_desc_addr; 118 __le64 sem_addr; 119 __le32 control_bits; 120 u32 zero2; 121 122 dma_addr_t data_dma_handle; 123 124 /* Copy of the bits */ 125 __le64 sem_control_bits; 126} __attribute__((aligned(8))); 127 128/* bits for card->flags */ 129#define UM_FLAG_DMA_IN_REGS 1 130#define UM_FLAG_NO_BYTE_STATUS 2 131#define UM_FLAG_NO_BATTREG 4 132#define UM_FLAG_NO_BATT 8 133#endif 134