#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt

#include <linux/kernel.h>
#include <linux/export.h>
#include <media/drv-intf/saa7146_vv.h>

static void calculate_output_format_register(struct saa7146_dev* saa, u32 palette, u32* clip_format)
{
        /* clear out the necessary bits */
        *clip_format &= 0x0000ffff;
        /* set these bits new */
        *clip_format |=  (( ((palette&0xf00)>>8) << 30) | ((palette&0x00f) << 24) | (((palette&0x0f0)>>4) << 16));
}

static void calculate_hps_source_and_sync(struct saa7146_dev *dev, int source, int sync, u32* hps_ctrl)
{
        *hps_ctrl &= ~(MASK_30 | MASK_31 | MASK_28);
        *hps_ctrl |= (source << 30) | (sync << 28);
}

static void calculate_hxo_and_hyo(struct saa7146_vv *vv, u32* hps_h_scale, u32* hps_ctrl)
{
        int hyo = 0, hxo = 0;

        hyo = vv->standard->v_offset;
        hxo = vv->standard->h_offset;

        *hps_h_scale    &= ~(MASK_B0 | 0xf00);
        *hps_h_scale    |= (hxo <<  0);

        *hps_ctrl       &= ~(MASK_W0 | MASK_B2);
        *hps_ctrl       |= (hyo << 12);
}

/* helper functions for the calculation of the horizontal- and vertical
   scaling registers, clip-format-register etc ...
   these functions take pointers to the (most-likely read-out
   original-values) and manipulate them according to the requested
   changes.
*/

/* hps_coeff used for CXY and CXUV; scale 1/1 -> scale 1/64 */
static struct {
        u16 hps_coeff;
        u16 weight_sum;
} hps_h_coeff_tab [] = {
        {0x00,   2}, {0x02,   4}, {0x00,   4}, {0x06,   8}, {0x02,   8},
        {0x08,   8}, {0x00,   8}, {0x1E,  16}, {0x0E,   8}, {0x26,   8},
        {0x06,   8}, {0x42,   8}, {0x02,   8}, {0x80,   8}, {0x00,   8},
        {0xFE,  16}, {0xFE,   8}, {0x7E,   8}, {0x7E,   8}, {0x3E,   8},
        {0x3E,   8}, {0x1E,   8}, {0x1E,   8}, {0x0E,   8}, {0x0E,   8},
        {0x06,   8}, {0x06,   8}, {0x02,   8}, {0x02,   8}, {0x00,   8},
        {0x00,   8}, {0xFE,  16}, {0xFE,   8}, {0xFE,   8}, {0xFE,   8},
        {0xFE,   8}, {0xFE,   8}, {0xFE,   8}, {0xFE,   8}, {0xFE,   8},
        {0xFE,   8}, {0xFE,   8}, {0xFE,   8}, {0xFE,   8}, {0xFE,   8},
        {0xFE,   8}, {0xFE,   8}, {0xFE,   8}, {0xFE,   8}, {0x7E,   8},
        {0x7E,   8}, {0x3E,   8}, {0x3E,   8}, {0x1E,   8}, {0x1E,   8},
        {0x0E,   8}, {0x0E,   8}, {0x06,   8}, {0x06,   8}, {0x02,   8},
        {0x02,   8}, {0x00,   8}, {0x00,   8}, {0xFE,  16}
};

/* table of attenuation values for horizontal scaling */
static u8 h_attenuation[] = { 1, 2, 4, 8, 2, 4, 8, 16, 0};

/* calculate horizontal scale registers */
static int calculate_h_scale_registers(struct saa7146_dev *dev,
        int in_x, int out_x, int flip_lr,
        u32* hps_ctrl, u32* hps_v_gain, u32* hps_h_prescale, u32* hps_h_scale)
{
        /* horizontal prescaler */
        u32 dcgx = 0, xpsc = 0, xacm = 0, cxy = 0, cxuv = 0;
        /* horizontal scaler */
        u32 xim = 0, xp = 0, xsci =0;
        /* vertical scale & gain */
        u32 pfuv = 0;

        /* helper variables */
        u32 h_atten = 0, i = 0;

        if ( 0 == out_x ) {
                return -EINVAL;
        }

        /* mask out vanity-bit */
        *hps_ctrl &= ~MASK_29;

        /* calculate prescale-(xspc)-value:     [n   .. 1/2) : 1
                                                [1/2 .. 1/3) : 2
                                                [1/3 .. 1/4) : 3
                                                ...             */
        if (in_x > out_x) {
                xpsc = in_x / out_x;
        }
        else {
                /* zooming */
                xpsc = 1;
        }

        /* if flip_lr-bit is set, number of pixels after
           horizontal prescaling must be < 384 */
        if ( 0 != flip_lr ) {

                /* set vanity bit */
                *hps_ctrl |= MASK_29;

                while (in_x / xpsc >= 384 )
                        xpsc++;
        }
        /* if zooming is wanted, number of pixels after
           horizontal prescaling must be < 768 */
        else {
                while ( in_x / xpsc >= 768 )
                        xpsc++;
        }

        /* maximum prescale is 64 (p.69) */
        if ( xpsc > 64 )
                xpsc = 64;

        /* keep xacm clear*/
        xacm = 0;

        /* set horizontal filter parameters (CXY = CXUV) */
        cxy = hps_h_coeff_tab[( (xpsc - 1) < 63 ? (xpsc - 1) : 63 )].hps_coeff;
        cxuv = cxy;

        /* calculate and set horizontal fine scale (xsci) */

        /* bypass the horizontal scaler ? */
        if ( (in_x == out_x) && ( 1 == xpsc ) )
                xsci = 0x400;
        else
                xsci = ( (1024 * in_x) / (out_x * xpsc) ) + xpsc;

        /* set start phase for horizontal fine scale (xp) to 0 */
        xp = 0;

        /* set xim, if we bypass the horizontal scaler */
        if ( 0x400 == xsci )
                xim = 1;
        else
                xim = 0;

        /* if the prescaler is bypassed, enable horizontal
           accumulation mode (xacm) and clear dcgx */
        if( 1 == xpsc ) {
                xacm = 1;
                dcgx = 0;
        } else {
                xacm = 0;
                /* get best match in the table of attenuations
                   for horizontal scaling */
                h_atten = hps_h_coeff_tab[( (xpsc - 1) < 63 ? (xpsc - 1) : 63 )].weight_sum;

                for (i = 0; h_attenuation[i] != 0; i++) {
                        if (h_attenuation[i] >= h_atten)
                                break;
                }

                dcgx = i;
        }

        /* the horizontal scaling increment controls the UV filter
           to reduce the bandwidth to improve the display quality,
           so set it ... */
        if ( xsci == 0x400)
                pfuv = 0x00;
        else if ( xsci < 0x600)
                pfuv = 0x01;
        else if ( xsci < 0x680)
                pfuv = 0x11;
        else if ( xsci < 0x700)
                pfuv = 0x22;
        else
                pfuv = 0x33;


        *hps_v_gain  &= MASK_W0|MASK_B2;
        *hps_v_gain  |= (pfuv << 24);

        *hps_h_scale    &= ~(MASK_W1 | 0xf000);
        *hps_h_scale    |= (xim << 31) | (xp << 24) | (xsci << 12);

        *hps_h_prescale |= (dcgx << 27) | ((xpsc-1) << 18) | (xacm << 17) | (cxy << 8) | (cxuv << 0);

        return 0;
}

static struct {
        u16 hps_coeff;
        u16 weight_sum;
} hps_v_coeff_tab [] = {
 {0x0100,   2},  {0x0102,   4},  {0x0300,   4},  {0x0106,   8},  {0x0502,   8},
 {0x0708,   8},  {0x0F00,   8},  {0x011E,  16},  {0x110E,  16},  {0x1926,  16},
 {0x3906,  16},  {0x3D42,  16},  {0x7D02,  16},  {0x7F80,  16},  {0xFF00,  16},
 {0x01FE,  32},  {0x01FE,  32},  {0x817E,  32},  {0x817E,  32},  {0xC13E,  32},
 {0xC13E,  32},  {0xE11E,  32},  {0xE11E,  32},  {0xF10E,  32},  {0xF10E,  32},
 {0xF906,  32},  {0xF906,  32},  {0xFD02,  32},  {0xFD02,  32},  {0xFF00,  32},
 {0xFF00,  32},  {0x01FE,  64},  {0x01FE,  64},  {0x01FE,  64},  {0x01FE,  64},
 {0x01FE,  64},  {0x01FE,  64},  {0x01FE,  64},  {0x01FE,  64},  {0x01FE,  64},
 {0x01FE,  64},  {0x01FE,  64},  {0x01FE,  64},  {0x01FE,  64},  {0x01FE,  64},
 {0x01FE,  64},  {0x01FE,  64},  {0x01FE,  64},  {0x01FE,  64},  {0x817E,  64},
 {0x817E,  64},  {0xC13E,  64},  {0xC13E,  64},  {0xE11E,  64},  {0xE11E,  64},
 {0xF10E,  64},  {0xF10E,  64},  {0xF906,  64},  {0xF906,  64},  {0xFD02,  64},
 {0xFD02,  64},  {0xFF00,  64},  {0xFF00,  64},  {0x01FE, 128}
};

/* table of attenuation values for vertical scaling */
static u16 v_attenuation[] = { 2, 4, 8, 16, 32, 64, 128, 256, 0};

/* calculate vertical scale registers */
static int calculate_v_scale_registers(struct saa7146_dev *dev, enum v4l2_field field,
        int in_y, int out_y, u32* hps_v_scale, u32* hps_v_gain)
{
        int lpi = 0;

        /* vertical scaling */
        u32 yacm = 0, ysci = 0, yacl = 0, ypo = 0, ype = 0;
        /* vertical scale & gain */
        u32 dcgy = 0, cya_cyb = 0;

        /* helper variables */
        u32 v_atten = 0, i = 0;

        /* error, if vertical zooming */
        if ( in_y < out_y ) {
                return -EINVAL;
        }

        /* linear phase interpolation may be used
           if scaling is between 1 and 1/2 (both fields used)
           or scaling is between 1/2 and 1/4 (if only one field is used) */

        if (V4L2_FIELD_HAS_BOTH(field)) {
                if( 2*out_y >= in_y) {
                        lpi = 1;
                }
        } else if (field == V4L2_FIELD_TOP
                || field == V4L2_FIELD_ALTERNATE
                || field == V4L2_FIELD_BOTTOM) {
                if( 4*out_y >= in_y ) {
                        lpi = 1;
                }
                out_y *= 2;
        }
        if( 0 != lpi ) {

                yacm = 0;
                yacl = 0;
                cya_cyb = 0x00ff;

                /* calculate scaling increment */
                if ( in_y > out_y )
                        ysci = ((1024 * in_y) / (out_y + 1)) - 1024;
                else
                        ysci = 0;

                dcgy = 0;

                /* calculate ype and ypo */
                ype = ysci / 16;
                ypo = ype + (ysci / 64);

        } else {
                yacm = 1;

                /* calculate scaling increment */
                ysci = (((10 * 1024 * (in_y - out_y - 1)) / in_y) + 9) / 10;

                /* calculate ype and ypo */
                ypo = ype = ((ysci + 15) / 16);

                /* the sequence length interval (yacl) has to be set according
                   to the prescale value, e.g.  [n   .. 1/2) : 0
                                                [1/2 .. 1/3) : 1
                                                [1/3 .. 1/4) : 2
                                                ... */
                if ( ysci < 512) {
                        yacl = 0;
                } else {
                        yacl = ( ysci / (1024 - ysci) );
                }

                /* get filter coefficients for cya, cyb from table hps_v_coeff_tab */
                cya_cyb = hps_v_coeff_tab[ (yacl < 63 ? yacl : 63 ) ].hps_coeff;

                /* get best match in the table of attenuations for vertical scaling */
                v_atten = hps_v_coeff_tab[ (yacl < 63 ? yacl : 63 ) ].weight_sum;

                for (i = 0; v_attenuation[i] != 0; i++) {
                        if (v_attenuation[i] >= v_atten)
                                break;
                }

                dcgy = i;
        }

        /* ypo and ype swapped in spec ? */
        *hps_v_scale    |= (yacm << 31) | (ysci << 21) | (yacl << 15) | (ypo << 8 ) | (ype << 1);

        *hps_v_gain     &= ~(MASK_W0|MASK_B2);
        *hps_v_gain     |= (dcgy << 16) | (cya_cyb << 0);

        return 0;
}

/* simple bubble-sort algorithm with duplicate elimination */
static int sort_and_eliminate(u32* values, int* count)
{
        int low = 0, high = 0, top = 0;
        int cur = 0, next = 0;

        /* sanity checks */
        if( (0 > *count) || (NULL == values) ) {
                return -EINVAL;
        }

        /* bubble sort the first @count items of the array @values */
        for( top = *count; top > 0; top--) {
                for( low = 0, high = 1; high < top; low++, high++) {
                        if( values[low] > values[high] )
                                swap(values[low], values[high]);
                }
        }

        /* remove duplicate items */
        for( cur = 0, next = 1; next < *count; next++) {
                if( values[cur] != values[next])
                        values[++cur] = values[next];
        }

        *count = cur + 1;

        return 0;
}

static void calculate_clipping_registers_rect(struct saa7146_dev *dev, struct saa7146_fh *fh,
        struct saa7146_video_dma *vdma2, u32* clip_format, u32* arbtr_ctrl, enum v4l2_field field)
{
        struct saa7146_vv *vv = dev->vv_data;
        __le32 *clipping = vv->d_clipping.cpu_addr;

        int width = vv->ov.win.w.width;
        int height =  vv->ov.win.w.height;
        int clipcount = vv->ov.nclips;

        u32 line_list[32];
        u32 pixel_list[32];
        int numdwords = 0;

        int i = 0, j = 0;
        int cnt_line = 0, cnt_pixel = 0;

        int x[32], y[32], w[32], h[32];

        /* clear out memory */
        memset(&line_list[0],  0x00, sizeof(u32)*32);
        memset(&pixel_list[0], 0x00, sizeof(u32)*32);
        memset(clipping,  0x00, SAA7146_CLIPPING_MEM);

        /* fill the line and pixel-lists */
        for(i = 0; i < clipcount; i++) {
                int l = 0, r = 0, t = 0, b = 0;

                x[i] = vv->ov.clips[i].c.left;
                y[i] = vv->ov.clips[i].c.top;
                w[i] = vv->ov.clips[i].c.width;
                h[i] = vv->ov.clips[i].c.height;

                if( w[i] < 0) {
                        x[i] += w[i]; w[i] = -w[i];
                }
                if( h[i] < 0) {
                        y[i] += h[i]; h[i] = -h[i];
                }
                if( x[i] < 0) {
                        w[i] += x[i]; x[i] = 0;
                }
                if( y[i] < 0) {
                        h[i] += y[i]; y[i] = 0;
                }
                if( 0 != vv->vflip ) {
                        y[i] = height - y[i] - h[i];
                }

                l = x[i];
                r = x[i]+w[i];
                t = y[i];
                b = y[i]+h[i];

                /* insert left/right coordinates */
                pixel_list[ 2*i   ] = min_t(int, l, width);
                pixel_list[(2*i)+1] = min_t(int, r, width);
                /* insert top/bottom coordinates */
                line_list[ 2*i   ] = min_t(int, t, height);
                line_list[(2*i)+1] = min_t(int, b, height);
        }

        /* sort and eliminate lists */
        cnt_line = cnt_pixel = 2*clipcount;
        sort_and_eliminate( &pixel_list[0], &cnt_pixel );
        sort_and_eliminate( &line_list[0], &cnt_line );

        /* calculate the number of used u32s */
        numdwords = max_t(int, (cnt_line+1), (cnt_pixel+1))*2;
        numdwords = max_t(int, 4, numdwords);
        numdwords = min_t(int, 64, numdwords);

        /* fill up cliptable */
        for(i = 0; i < cnt_pixel; i++) {
                clipping[2*i] |= cpu_to_le32(pixel_list[i] << 16);
        }
        for(i = 0; i < cnt_line; i++) {
                clipping[(2*i)+1] |= cpu_to_le32(line_list[i] << 16);
        }

        /* fill up cliptable with the display infos */
        for(j = 0; j < clipcount; j++) {

                for(i = 0; i < cnt_pixel; i++) {

                        if( x[j] < 0)
                                x[j] = 0;

                        if( pixel_list[i] < (x[j] + w[j])) {

                                if ( pixel_list[i] >= x[j] ) {
                                        clipping[2*i] |= cpu_to_le32(1 << j);
                                }
                        }
                }
                for(i = 0; i < cnt_line; i++) {

                        if( y[j] < 0)
                                y[j] = 0;

                        if( line_list[i] < (y[j] + h[j]) ) {

                                if( line_list[i] >= y[j] ) {
                                        clipping[(2*i)+1] |= cpu_to_le32(1 << j);
                                }
                        }
                }
        }

        /* adjust arbitration control register */
        *arbtr_ctrl &= 0xffff00ff;
        *arbtr_ctrl |= 0x00001c00;

        vdma2->base_even        = vv->d_clipping.dma_handle;
        vdma2->base_odd         = vv->d_clipping.dma_handle;
        vdma2->prot_addr        = vv->d_clipping.dma_handle+((sizeof(u32))*(numdwords));
        vdma2->base_page        = 0x04;
        vdma2->pitch            = 0x00;
        vdma2->num_line_byte    = (0 << 16 | (sizeof(u32))*(numdwords-1) );

        /* set clipping-mode. this depends on the field(s) used */
        *clip_format &= 0xfffffff7;
        if (V4L2_FIELD_HAS_BOTH(field)) {
                *clip_format |= 0x00000008;
        } else {
                *clip_format |= 0x00000000;
        }
}

/* disable clipping */
static void saa7146_disable_clipping(struct saa7146_dev *dev)
{
        u32 clip_format = saa7146_read(dev, CLIP_FORMAT_CTRL);

        /* mask out relevant bits (=lower word)*/
        clip_format &= MASK_W1;

        /* upload clipping-registers*/
        saa7146_write(dev, CLIP_FORMAT_CTRL,clip_format);
        saa7146_write(dev, MC2, (MASK_05 | MASK_21));

        /* disable video dma2 */
        saa7146_write(dev, MC1, MASK_21);
}

static void saa7146_set_clipping_rect(struct saa7146_fh *fh)
{
        struct saa7146_dev *dev = fh->dev;
        struct saa7146_vv *vv = dev->vv_data;
        enum v4l2_field field = vv->ov.win.field;
        struct  saa7146_video_dma vdma2;
        u32 clip_format;
        u32 arbtr_ctrl;

        /* check clipcount, disable clipping if clipcount == 0*/
        if (vv->ov.nclips == 0) {
                saa7146_disable_clipping(dev);
                return;
        }

        clip_format = saa7146_read(dev, CLIP_FORMAT_CTRL);
        arbtr_ctrl = saa7146_read(dev, PCI_BT_V1);

        calculate_clipping_registers_rect(dev, fh, &vdma2, &clip_format, &arbtr_ctrl, field);

        /* set clipping format */
        clip_format &= 0xffff0008;
        clip_format |= (SAA7146_CLIPPING_RECT << 4);

        /* prepare video dma2 */
        saa7146_write(dev, BASE_EVEN2,          vdma2.base_even);
        saa7146_write(dev, BASE_ODD2,           vdma2.base_odd);
        saa7146_write(dev, PROT_ADDR2,          vdma2.prot_addr);
        saa7146_write(dev, BASE_PAGE2,          vdma2.base_page);
        saa7146_write(dev, PITCH2,              vdma2.pitch);
        saa7146_write(dev, NUM_LINE_BYTE2,      vdma2.num_line_byte);

        /* prepare the rest */
        saa7146_write(dev, CLIP_FORMAT_CTRL,clip_format);
        saa7146_write(dev, PCI_BT_V1, arbtr_ctrl);

        /* upload clip_control-register, clipping-registers, enable video dma2 */
        saa7146_write(dev, MC2, (MASK_05 | MASK_21 | MASK_03 | MASK_19));
        saa7146_write(dev, MC1, (MASK_05 | MASK_21));
}

static void saa7146_set_window(struct saa7146_dev *dev, int width, int height, enum v4l2_field field)
{
        struct saa7146_vv *vv = dev->vv_data;

        int source = vv->current_hps_source;
        int sync = vv->current_hps_sync;

        u32 hps_v_scale = 0, hps_v_gain  = 0, hps_ctrl = 0, hps_h_prescale = 0, hps_h_scale = 0;

        /* set vertical scale */
        hps_v_scale = 0; /* all bits get set by the function-call */
        hps_v_gain  = 0; /* fixme: saa7146_read(dev, HPS_V_GAIN);*/
        calculate_v_scale_registers(dev, field, vv->standard->v_field*2, height, &hps_v_scale, &hps_v_gain);

        /* set horizontal scale */
        hps_ctrl        = 0;
        hps_h_prescale  = 0; /* all bits get set in the function */
        hps_h_scale     = 0;
        calculate_h_scale_registers(dev, vv->standard->h_pixels, width, vv->hflip, &hps_ctrl, &hps_v_gain, &hps_h_prescale, &hps_h_scale);

        /* set hyo and hxo */
        calculate_hxo_and_hyo(vv, &hps_h_scale, &hps_ctrl);
        calculate_hps_source_and_sync(dev, source, sync, &hps_ctrl);

        /* write out new register contents */
        saa7146_write(dev, HPS_V_SCALE, hps_v_scale);
        saa7146_write(dev, HPS_V_GAIN,  hps_v_gain);
        saa7146_write(dev, HPS_CTRL,    hps_ctrl);
        saa7146_write(dev, HPS_H_PRESCALE,hps_h_prescale);
        saa7146_write(dev, HPS_H_SCALE, hps_h_scale);

        /* upload shadow-ram registers */
        saa7146_write(dev, MC2, (MASK_05 | MASK_06 | MASK_21 | MASK_22) );
}

/* calculate the new memory offsets for a desired position */
static void saa7146_set_position(struct saa7146_dev *dev, int w_x, int w_y, int w_height, enum v4l2_field field, u32 pixelformat)
{
        struct saa7146_vv *vv = dev->vv_data;
        struct saa7146_format *sfmt = saa7146_format_by_fourcc(dev, pixelformat);

        int b_depth = vv->ov_fmt->depth;
        int b_bpl = vv->ov_fb.fmt.bytesperline;
        /* The unsigned long cast is to remove a 64-bit compile warning since
           it looks like a 64-bit address is cast to a 32-bit value, even
           though the base pointer is really a 32-bit physical address that
           goes into a 32-bit DMA register.
           FIXME: might not work on some 64-bit platforms, but see the FIXME
           in struct v4l2_framebuffer (videodev2.h) for that.
         */
        u32 base = (u32)(unsigned long)vv->ov_fb.base;

        struct  saa7146_video_dma vdma1;

        /* calculate memory offsets for picture, look if we shall top-down-flip */
        vdma1.pitch     = 2*b_bpl;
        if ( 0 == vv->vflip ) {
                vdma1.base_even = base + (w_y * (vdma1.pitch/2)) + (w_x * (b_depth / 8));
                vdma1.base_odd  = vdma1.base_even + (vdma1.pitch / 2);
                vdma1.prot_addr = vdma1.base_even + (w_height * (vdma1.pitch / 2));
        }
        else {
                vdma1.base_even = base + ((w_y+w_height) * (vdma1.pitch/2)) + (w_x * (b_depth / 8));
                vdma1.base_odd  = vdma1.base_even - (vdma1.pitch / 2);
                vdma1.prot_addr = vdma1.base_odd - (w_height * (vdma1.pitch / 2));
        }

        if (V4L2_FIELD_HAS_BOTH(field)) {
        } else if (field == V4L2_FIELD_ALTERNATE) {
                /* fixme */
                vdma1.base_odd = vdma1.prot_addr;
                vdma1.pitch /= 2;
        } else if (field == V4L2_FIELD_TOP) {
                vdma1.base_odd = vdma1.prot_addr;
                vdma1.pitch /= 2;
        } else if (field == V4L2_FIELD_BOTTOM) {
                vdma1.base_odd = vdma1.base_even;
                vdma1.base_even = vdma1.prot_addr;
                vdma1.pitch /= 2;
        }

        if ( 0 != vv->vflip ) {
                vdma1.pitch *= -1;
        }

        vdma1.base_page = sfmt->swap;
        vdma1.num_line_byte = (vv->standard->v_field<<16)+vv->standard->h_pixels;

        saa7146_write_out_dma(dev, 1, &vdma1);
}

static void saa7146_set_output_format(struct saa7146_dev *dev, unsigned long palette)
{
        u32 clip_format = saa7146_read(dev, CLIP_FORMAT_CTRL);

        /* call helper function */
        calculate_output_format_register(dev,palette,&clip_format);

        /* update the hps registers */
        saa7146_write(dev, CLIP_FORMAT_CTRL, clip_format);
        saa7146_write(dev, MC2, (MASK_05 | MASK_21));
}

/* select input-source */
void saa7146_set_hps_source_and_sync(struct saa7146_dev *dev, int source, int sync)
{
        struct saa7146_vv *vv = dev->vv_data;
        u32 hps_ctrl = 0;

        /* read old state */
        hps_ctrl = saa7146_read(dev, HPS_CTRL);

        hps_ctrl &= ~( MASK_31 | MASK_30 | MASK_28 );
        hps_ctrl |= (source << 30) | (sync << 28);

        /* write back & upload register */
        saa7146_write(dev, HPS_CTRL, hps_ctrl);
        saa7146_write(dev, MC2, (MASK_05 | MASK_21));

        vv->current_hps_source = source;
        vv->current_hps_sync = sync;
}
EXPORT_SYMBOL_GPL(saa7146_set_hps_source_and_sync);

int saa7146_enable_overlay(struct saa7146_fh *fh)
{
        struct saa7146_dev *dev = fh->dev;
        struct saa7146_vv *vv = dev->vv_data;

        saa7146_set_window(dev, vv->ov.win.w.width, vv->ov.win.w.height, vv->ov.win.field);
        saa7146_set_position(dev, vv->ov.win.w.left, vv->ov.win.w.top, vv->ov.win.w.height, vv->ov.win.field, vv->ov_fmt->pixelformat);
        saa7146_set_output_format(dev, vv->ov_fmt->trans);
        saa7146_set_clipping_rect(fh);

        /* enable video dma1 */
        saa7146_write(dev, MC1, (MASK_06 | MASK_22));
        return 0;
}

void saa7146_disable_overlay(struct saa7146_fh *fh)
{
        struct saa7146_dev *dev = fh->dev;

        /* disable clipping + video dma1 */
        saa7146_disable_clipping(dev);
        saa7146_write(dev, MC1, MASK_22);
}

void saa7146_write_out_dma(struct saa7146_dev* dev, int which, struct saa7146_video_dma* vdma)
{
        int where = 0;

        if( which < 1 || which > 3) {
                return;
        }

        /* calculate starting address */
        where  = (which-1)*0x18;

        saa7146_write(dev, where,       vdma->base_odd);
        saa7146_write(dev, where+0x04,  vdma->base_even);
        saa7146_write(dev, where+0x08,  vdma->prot_addr);
        saa7146_write(dev, where+0x0c,  vdma->pitch);
        saa7146_write(dev, where+0x10,  vdma->base_page);
        saa7146_write(dev, where+0x14,  vdma->num_line_byte);

        /* upload */
        saa7146_write(dev, MC2, (MASK_02<<(which-1))|(MASK_18<<(which-1)));
/*
        printk("vdma%d.base_even:     0x%08x\n", which,vdma->base_even);
        printk("vdma%d.base_odd:      0x%08x\n", which,vdma->base_odd);
        printk("vdma%d.prot_addr:     0x%08x\n", which,vdma->prot_addr);
        printk("vdma%d.base_page:     0x%08x\n", which,vdma->base_page);
        printk("vdma%d.pitch:         0x%08x\n", which,vdma->pitch);
        printk("vdma%d.num_line_byte: 0x%08x\n", which,vdma->num_line_byte);
*/
}

static int calculate_video_dma_grab_packed(struct saa7146_dev* dev, struct saa7146_buf *buf)
{
        struct saa7146_vv *vv = dev->vv_data;
        struct saa7146_video_dma vdma1;

        struct saa7146_format *sfmt = saa7146_format_by_fourcc(dev,buf->fmt->pixelformat);

        int width = buf->fmt->width;
        int height = buf->fmt->height;
        int bytesperline = buf->fmt->bytesperline;
        enum v4l2_field field = buf->fmt->field;

        int depth = sfmt->depth;

        DEB_CAP("[size=%dx%d,fields=%s]\n",
                width, height, v4l2_field_names[field]);

        if( bytesperline != 0) {
                vdma1.pitch = bytesperline*2;
        } else {
                vdma1.pitch = (width*depth*2)/8;
        }
        vdma1.num_line_byte     = ((vv->standard->v_field<<16) + vv->standard->h_pixels);
        vdma1.base_page         = buf->pt[0].dma | ME1 | sfmt->swap;

        if( 0 != vv->vflip ) {
                vdma1.prot_addr = buf->pt[0].offset;
                vdma1.base_even = buf->pt[0].offset+(vdma1.pitch/2)*height;
                vdma1.base_odd  = vdma1.base_even - (vdma1.pitch/2);
        } else {
                vdma1.base_even = buf->pt[0].offset;
                vdma1.base_odd  = vdma1.base_even + (vdma1.pitch/2);
                vdma1.prot_addr = buf->pt[0].offset+(vdma1.pitch/2)*height;
        }

        if (V4L2_FIELD_HAS_BOTH(field)) {
        } else if (field == V4L2_FIELD_ALTERNATE) {
                /* fixme */
                if ( vv->last_field == V4L2_FIELD_TOP ) {
                        vdma1.base_odd  = vdma1.prot_addr;
                        vdma1.pitch /= 2;
                } else if ( vv->last_field == V4L2_FIELD_BOTTOM ) {
                        vdma1.base_odd  = vdma1.base_even;
                        vdma1.base_even = vdma1.prot_addr;
                        vdma1.pitch /= 2;
                }
        } else if (field == V4L2_FIELD_TOP) {
                vdma1.base_odd  = vdma1.prot_addr;
                vdma1.pitch /= 2;
        } else if (field == V4L2_FIELD_BOTTOM) {
                vdma1.base_odd  = vdma1.base_even;
                vdma1.base_even = vdma1.prot_addr;
                vdma1.pitch /= 2;
        }

        if( 0 != vv->vflip ) {
                vdma1.pitch *= -1;
        }

        saa7146_write_out_dma(dev, 1, &vdma1);
        return 0;
}

static int calc_planar_422(struct saa7146_vv *vv, struct saa7146_buf *buf, struct saa7146_video_dma *vdma2, struct saa7146_video_dma *vdma3)
{
        int height = buf->fmt->height;
        int width = buf->fmt->width;

        vdma2->pitch    = width;
        vdma3->pitch    = width;

        /* fixme: look at bytesperline! */

        if( 0 != vv->vflip ) {
                vdma2->prot_addr        = buf->pt[1].offset;
                vdma2->base_even        = ((vdma2->pitch/2)*height)+buf->pt[1].offset;
                vdma2->base_odd         = vdma2->base_even - (vdma2->pitch/2);

                vdma3->prot_addr        = buf->pt[2].offset;
                vdma3->base_even        = ((vdma3->pitch/2)*height)+buf->pt[2].offset;
                vdma3->base_odd         = vdma3->base_even - (vdma3->pitch/2);
        } else {
                vdma3->base_even        = buf->pt[2].offset;
                vdma3->base_odd         = vdma3->base_even + (vdma3->pitch/2);
                vdma3->prot_addr        = (vdma3->pitch/2)*height+buf->pt[2].offset;

                vdma2->base_even        = buf->pt[1].offset;
                vdma2->base_odd         = vdma2->base_even + (vdma2->pitch/2);
                vdma2->prot_addr        = (vdma2->pitch/2)*height+buf->pt[1].offset;
        }

        return 0;
}

static int calc_planar_420(struct saa7146_vv *vv, struct saa7146_buf *buf, struct saa7146_video_dma *vdma2, struct saa7146_video_dma *vdma3)
{
        int height = buf->fmt->height;
        int width = buf->fmt->width;

        vdma2->pitch    = width/2;
        vdma3->pitch    = width/2;

        if( 0 != vv->vflip ) {
                vdma2->prot_addr        = buf->pt[2].offset;
                vdma2->base_even        = ((vdma2->pitch/2)*height)+buf->pt[2].offset;
                vdma2->base_odd         = vdma2->base_even - (vdma2->pitch/2);

                vdma3->prot_addr        = buf->pt[1].offset;
                vdma3->base_even        = ((vdma3->pitch/2)*height)+buf->pt[1].offset;
                vdma3->base_odd         = vdma3->base_even - (vdma3->pitch/2);

        } else {
                vdma3->base_even        = buf->pt[2].offset;
                vdma3->base_odd         = vdma3->base_even + (vdma3->pitch);
                vdma3->prot_addr        = (vdma3->pitch/2)*height+buf->pt[2].offset;

                vdma2->base_even        = buf->pt[1].offset;
                vdma2->base_odd         = vdma2->base_even + (vdma2->pitch);
                vdma2->prot_addr        = (vdma2->pitch/2)*height+buf->pt[1].offset;
        }
        return 0;
}

static int calculate_video_dma_grab_planar(struct saa7146_dev* dev, struct saa7146_buf *buf)
{
        struct saa7146_vv *vv = dev->vv_data;
        struct saa7146_video_dma vdma1;
        struct saa7146_video_dma vdma2;
        struct saa7146_video_dma vdma3;

        struct saa7146_format *sfmt = saa7146_format_by_fourcc(dev,buf->fmt->pixelformat);

        int width = buf->fmt->width;
        int height = buf->fmt->height;
        enum v4l2_field field = buf->fmt->field;

        BUG_ON(0 == buf->pt[0].dma);
        BUG_ON(0 == buf->pt[1].dma);
        BUG_ON(0 == buf->pt[2].dma);

        DEB_CAP("[size=%dx%d,fields=%s]\n",
                width, height, v4l2_field_names[field]);

        /* fixme: look at bytesperline! */

        /* fixme: what happens for user space buffers here?. The offsets are
           most likely wrong, this version here only works for page-aligned
           buffers, modifications to the pagetable-functions are necessary...*/

        vdma1.pitch             = width*2;
        vdma1.num_line_byte     = ((vv->standard->v_field<<16) + vv->standard->h_pixels);
        vdma1.base_page         = buf->pt[0].dma | ME1;

        if( 0 != vv->vflip ) {
                vdma1.prot_addr = buf->pt[0].offset;
                vdma1.base_even = ((vdma1.pitch/2)*height)+buf->pt[0].offset;
                vdma1.base_odd  = vdma1.base_even - (vdma1.pitch/2);
        } else {
                vdma1.base_even = buf->pt[0].offset;
                vdma1.base_odd  = vdma1.base_even + (vdma1.pitch/2);
                vdma1.prot_addr = (vdma1.pitch/2)*height+buf->pt[0].offset;
        }

        vdma2.num_line_byte     = 0; /* unused */
        vdma2.base_page         = buf->pt[1].dma | ME1;

        vdma3.num_line_byte     = 0; /* unused */
        vdma3.base_page         = buf->pt[2].dma | ME1;

        switch( sfmt->depth ) {
                case 12: {
                        calc_planar_420(vv,buf,&vdma2,&vdma3);
                        break;
                }
                case 16: {
                        calc_planar_422(vv,buf,&vdma2,&vdma3);
                        break;
                }
                default: {
                        return -1;
                }
        }

        if (V4L2_FIELD_HAS_BOTH(field)) {
        } else if (field == V4L2_FIELD_ALTERNATE) {
                /* fixme */
                vdma1.base_odd  = vdma1.prot_addr;
                vdma1.pitch /= 2;
                vdma2.base_odd  = vdma2.prot_addr;
                vdma2.pitch /= 2;
                vdma3.base_odd  = vdma3.prot_addr;
                vdma3.pitch /= 2;
        } else if (field == V4L2_FIELD_TOP) {
                vdma1.base_odd  = vdma1.prot_addr;
                vdma1.pitch /= 2;
                vdma2.base_odd  = vdma2.prot_addr;
                vdma2.pitch /= 2;
                vdma3.base_odd  = vdma3.prot_addr;
                vdma3.pitch /= 2;
        } else if (field == V4L2_FIELD_BOTTOM) {
                vdma1.base_odd  = vdma1.base_even;
                vdma1.base_even = vdma1.prot_addr;
                vdma1.pitch /= 2;
                vdma2.base_odd  = vdma2.base_even;
                vdma2.base_even = vdma2.prot_addr;
                vdma2.pitch /= 2;
                vdma3.base_odd  = vdma3.base_even;
                vdma3.base_even = vdma3.prot_addr;
                vdma3.pitch /= 2;
        }

        if( 0 != vv->vflip ) {
                vdma1.pitch *= -1;
                vdma2.pitch *= -1;
                vdma3.pitch *= -1;
        }

        saa7146_write_out_dma(dev, 1, &vdma1);
        if( (sfmt->flags & FORMAT_BYTE_SWAP) != 0 ) {
                saa7146_write_out_dma(dev, 3, &vdma2);
                saa7146_write_out_dma(dev, 2, &vdma3);
        } else {
                saa7146_write_out_dma(dev, 2, &vdma2);
                saa7146_write_out_dma(dev, 3, &vdma3);
        }
        return 0;
}

static void program_capture_engine(struct saa7146_dev *dev, int planar)
{
        struct saa7146_vv *vv = dev->vv_data;
        int count = 0;

        unsigned long e_wait = vv->current_hps_sync == SAA7146_HPS_SYNC_PORT_A ? CMD_E_FID_A : CMD_E_FID_B;
        unsigned long o_wait = vv->current_hps_sync == SAA7146_HPS_SYNC_PORT_A ? CMD_O_FID_A : CMD_O_FID_B;

        /* wait for o_fid_a/b / e_fid_a/b toggle only if rps register 0 is not set*/
        WRITE_RPS0(CMD_PAUSE | CMD_OAN | CMD_SIG0 | o_wait);
        WRITE_RPS0(CMD_PAUSE | CMD_OAN | CMD_SIG0 | e_wait);

        /* set rps register 0 */
        WRITE_RPS0(CMD_WR_REG | (1 << 8) | (MC2/4));
        WRITE_RPS0(MASK_27 | MASK_11);

        /* turn on video-dma1 */
        WRITE_RPS0(CMD_WR_REG_MASK | (MC1/4));
        WRITE_RPS0(MASK_06 | MASK_22);                  /* => mask */
        WRITE_RPS0(MASK_06 | MASK_22);                  /* => values */
        if( 0 != planar ) {
                /* turn on video-dma2 */
                WRITE_RPS0(CMD_WR_REG_MASK | (MC1/4));
                WRITE_RPS0(MASK_05 | MASK_21);                  /* => mask */
                WRITE_RPS0(MASK_05 | MASK_21);                  /* => values */

                /* turn on video-dma3 */
                WRITE_RPS0(CMD_WR_REG_MASK | (MC1/4));
                WRITE_RPS0(MASK_04 | MASK_20);                  /* => mask */
                WRITE_RPS0(MASK_04 | MASK_20);                  /* => values */
        }

        /* wait for o_fid_a/b / e_fid_a/b toggle */
        if ( vv->last_field == V4L2_FIELD_INTERLACED ) {
                WRITE_RPS0(CMD_PAUSE | o_wait);
                WRITE_RPS0(CMD_PAUSE | e_wait);
        } else if ( vv->last_field == V4L2_FIELD_TOP ) {
                WRITE_RPS0(CMD_PAUSE | (vv->current_hps_sync == SAA7146_HPS_SYNC_PORT_A ? MASK_10 : MASK_09));
                WRITE_RPS0(CMD_PAUSE | o_wait);
        } else if ( vv->last_field == V4L2_FIELD_BOTTOM ) {
                WRITE_RPS0(CMD_PAUSE | (vv->current_hps_sync == SAA7146_HPS_SYNC_PORT_A ? MASK_10 : MASK_09));
                WRITE_RPS0(CMD_PAUSE | e_wait);
        }

        /* turn off video-dma1 */
        WRITE_RPS0(CMD_WR_REG_MASK | (MC1/4));
        WRITE_RPS0(MASK_22 | MASK_06);                  /* => mask */
        WRITE_RPS0(MASK_22);                            /* => values */
        if( 0 != planar ) {
                /* turn off video-dma2 */
                WRITE_RPS0(CMD_WR_REG_MASK | (MC1/4));
                WRITE_RPS0(MASK_05 | MASK_21);                  /* => mask */
                WRITE_RPS0(MASK_21);                            /* => values */

                /* turn off video-dma3 */
                WRITE_RPS0(CMD_WR_REG_MASK | (MC1/4));
                WRITE_RPS0(MASK_04 | MASK_20);                  /* => mask */
                WRITE_RPS0(MASK_20);                            /* => values */
        }

        /* generate interrupt */
        WRITE_RPS0(CMD_INTERRUPT);

        /* stop */
        WRITE_RPS0(CMD_STOP);
}

void saa7146_set_capture(struct saa7146_dev *dev, struct saa7146_buf *buf, struct saa7146_buf *next)
{
        struct saa7146_format *sfmt = saa7146_format_by_fourcc(dev,buf->fmt->pixelformat);
        struct saa7146_vv *vv = dev->vv_data;
        u32 vdma1_prot_addr;

        DEB_CAP("buf:%p, next:%p\n", buf, next);

        vdma1_prot_addr = saa7146_read(dev, PROT_ADDR1);
        if( 0 == vdma1_prot_addr ) {
                /* clear out beginning of streaming bit (rps register 0)*/
                DEB_CAP("forcing sync to new frame\n");
                saa7146_write(dev, MC2, MASK_27 );
        }

        saa7146_set_window(dev, buf->fmt->width, buf->fmt->height, buf->fmt->field);
        saa7146_set_output_format(dev, sfmt->trans);
        saa7146_disable_clipping(dev);

        if ( vv->last_field == V4L2_FIELD_INTERLACED ) {
        } else if ( vv->last_field == V4L2_FIELD_TOP ) {
                vv->last_field = V4L2_FIELD_BOTTOM;
        } else if ( vv->last_field == V4L2_FIELD_BOTTOM ) {
                vv->last_field = V4L2_FIELD_TOP;
        }

        if( 0 != IS_PLANAR(sfmt->trans)) {
                calculate_video_dma_grab_planar(dev, buf);
                program_capture_engine(dev,1);
        } else {
                calculate_video_dma_grab_packed(dev, buf);
                program_capture_engine(dev,0);
        }

/*
        printk("vdma%d.base_even:     0x%08x\n", 1,saa7146_read(dev,BASE_EVEN1));
        printk("vdma%d.base_odd:      0x%08x\n", 1,saa7146_read(dev,BASE_ODD1));
        printk("vdma%d.prot_addr:     0x%08x\n", 1,saa7146_read(dev,PROT_ADDR1));
        printk("vdma%d.base_page:     0x%08x\n", 1,saa7146_read(dev,BASE_PAGE1));
        printk("vdma%d.pitch:         0x%08x\n", 1,saa7146_read(dev,PITCH1));
        printk("vdma%d.num_line_byte: 0x%08x\n", 1,saa7146_read(dev,NUM_LINE_BYTE1));
        printk("vdma%d => vptr      : 0x%08x\n", 1,saa7146_read(dev,PCI_VDP1));
*/

        /* write the address of the rps-program */
        saa7146_write(dev, RPS_ADDR0, dev->d_rps0.dma_handle);

        /* turn on rps */
        saa7146_write(dev, MC1, (MASK_12 | MASK_28));
}