// SPDX-License-Identifier: GPL-2.0
/*
 * Copyright (C) 2010 Red Hat, Inc.
 * All Rights Reserved.
 */
#include "xfs.h"
#include "xfs_shared.h"
#include "xfs_format.h"
#include "xfs_log_format.h"
#include "xfs_trans_resv.h"
#include "xfs_sb.h"
#include "xfs_mount.h"
#include "xfs_btree.h"
#include "xfs_alloc_btree.h"
#include "xfs_alloc.h"
#include "xfs_discard.h"
#include "xfs_error.h"
#include "xfs_extent_busy.h"
#include "xfs_trace.h"
#include "xfs_log.h"

STATIC int
xfs_trim_extents(
        struct xfs_mount        *mp,
        xfs_agnumber_t          agno,
        xfs_daddr_t             start,
        xfs_daddr_t             end,
        xfs_daddr_t             minlen,
        uint64_t                *blocks_trimmed)
{
        struct block_device     *bdev = mp->m_ddev_targp->bt_bdev;
        struct xfs_btree_cur    *cur;
        struct xfs_buf          *agbp;
        struct xfs_agf          *agf;
        struct xfs_perag        *pag;
        int                     error;
        int                     i;

        pag = xfs_perag_get(mp, agno);

        /*
         * Force out the log.  This means any transactions that might have freed
         * space before we take the AGF buffer lock are now on disk, and the
         * volatile disk cache is flushed.
         */
        xfs_log_force(mp, XFS_LOG_SYNC);

        error = xfs_alloc_read_agf(mp, NULL, agno, 0, &agbp);
        if (error)
                goto out_put_perag;
        agf = agbp->b_addr;

        cur = xfs_allocbt_init_cursor(mp, NULL, agbp, agno, XFS_BTNUM_CNT);

        /*
         * Look up the longest btree in the AGF and start with it.
         */
        error = xfs_alloc_lookup_ge(cur, 0, be32_to_cpu(agf->agf_longest), &i);
        if (error)
                goto out_del_cursor;

        /*
         * Loop until we are done with all extents that are large
         * enough to be worth discarding.
         */
        while (i) {
                xfs_agblock_t   fbno;
                xfs_extlen_t    flen;
                xfs_daddr_t     dbno;
                xfs_extlen_t    dlen;

                error = xfs_alloc_get_rec(cur, &fbno, &flen, &i);
                if (error)
                        goto out_del_cursor;
                if (XFS_IS_CORRUPT(mp, i != 1)) {
                        error = -EFSCORRUPTED;
                        goto out_del_cursor;
                }
                ASSERT(flen <= be32_to_cpu(agf->agf_longest));

                /*
                 * use daddr format for all range/len calculations as that is
                 * the format the range/len variables are supplied in by
                 * userspace.
                 */
                dbno = XFS_AGB_TO_DADDR(mp, agno, fbno);
                dlen = XFS_FSB_TO_BB(mp, flen);

                /*
                 * Too small?  Give up.
                 */
                if (dlen < minlen) {
                        trace_xfs_discard_toosmall(mp, agno, fbno, flen);
                        goto out_del_cursor;
                }

                /*
                 * If the extent is entirely outside of the range we are
                 * supposed to discard skip it.  Do not bother to trim
                 * down partially overlapping ranges for now.
                 */
                if (dbno + dlen < start || dbno > end) {
                        trace_xfs_discard_exclude(mp, agno, fbno, flen);
                        goto next_extent;
                }

                /*
                 * If any blocks in the range are still busy, skip the
                 * discard and try again the next time.
                 */
                if (xfs_extent_busy_search(mp, agno, fbno, flen)) {
                        trace_xfs_discard_busy(mp, agno, fbno, flen);
                        goto next_extent;
                }

                trace_xfs_discard_extent(mp, agno, fbno, flen);
                error = blkdev_issue_discard(bdev, dbno, dlen, GFP_NOFS, 0);
                if (error)
                        goto out_del_cursor;
                *blocks_trimmed += flen;

next_extent:
                error = xfs_btree_decrement(cur, 0, &i);
                if (error)
                        goto out_del_cursor;

                if (fatal_signal_pending(current)) {
                        error = -ERESTARTSYS;
                        goto out_del_cursor;
                }
        }

out_del_cursor:
        xfs_btree_del_cursor(cur, error);
        xfs_buf_relse(agbp);
out_put_perag:
        xfs_perag_put(pag);
        return error;
}

/*
 * trim a range of the filesystem.
 *
 * Note: the parameters passed from userspace are byte ranges into the
 * filesystem which does not match to the format we use for filesystem block
 * addressing. FSB addressing is sparse (AGNO|AGBNO), while the incoming format
 * is a linear address range. Hence we need to use DADDR based conversions and
 * comparisons for determining the correct offset and regions to trim.
 */
int
xfs_ioc_trim(
        struct xfs_mount                *mp,
        struct fstrim_range __user      *urange)
{
        struct request_queue    *q = bdev_get_queue(mp->m_ddev_targp->bt_bdev);
        unsigned int            granularity = q->limits.discard_granularity;
        struct fstrim_range     range;
        xfs_daddr_t             start, end, minlen;
        xfs_agnumber_t          start_agno, end_agno, agno;
        uint64_t                blocks_trimmed = 0;
        int                     error, last_error = 0;

        if (!capable(CAP_SYS_ADMIN))
                return -EPERM;
        if (!blk_queue_discard(q))
                return -EOPNOTSUPP;

        /*
         * We haven't recovered the log, so we cannot use our bnobt-guided
         * storage zapping commands.
         */
        if (mp->m_flags & XFS_MOUNT_NORECOVERY)
                return -EROFS;

        if (copy_from_user(&range, urange, sizeof(range)))
                return -EFAULT;

        range.minlen = max_t(u64, granularity, range.minlen);
        minlen = BTOBB(range.minlen);
        /*
         * Truncating down the len isn't actually quite correct, but using
         * BBTOB would mean we trivially get overflows for values
         * of ULLONG_MAX or slightly lower.  And ULLONG_MAX is the default
         * used by the fstrim application.  In the end it really doesn't
         * matter as trimming blocks is an advisory interface.
         */
        if (range.start >= XFS_FSB_TO_B(mp, mp->m_sb.sb_dblocks) ||
            range.minlen > XFS_FSB_TO_B(mp, mp->m_ag_max_usable) ||
            range.len < mp->m_sb.sb_blocksize)
                return -EINVAL;

        start = BTOBB(range.start);
        end = start + BTOBBT(range.len) - 1;

        if (end > XFS_FSB_TO_BB(mp, mp->m_sb.sb_dblocks) - 1)
                end = XFS_FSB_TO_BB(mp, mp->m_sb.sb_dblocks)- 1;

        start_agno = xfs_daddr_to_agno(mp, start);
        end_agno = xfs_daddr_to_agno(mp, end);

        for (agno = start_agno; agno <= end_agno; agno++) {
                error = xfs_trim_extents(mp, agno, start, end, minlen,
                                          &blocks_trimmed);
                if (error) {
                        last_error = error;
                        if (error == -ERESTARTSYS)
                                break;
                }
        }

        if (last_error)
                return last_error;

        range.len = XFS_FSB_TO_B(mp, blocks_trimmed);
        if (copy_to_user(urange, &range, sizeof(range)))
                return -EFAULT;
        return 0;
}