linux/drivers/gpu/drm/mxsfb/mxsfb_regs.h
<<
>>
Prefs
   1/*
   2 * Copyright (C) 2010 Juergen Beisert, Pengutronix
   3 * Copyright (C) 2016 Marek Vasut <marex@denx.de>
   4 *
   5 * i.MX23/i.MX28/i.MX6SX MXSFB LCD controller driver.
   6 *
   7 * This program is free software; you can redistribute it and/or
   8 * modify it under the terms of the GNU General Public License
   9 * as published by the Free Software Foundation; either version 2
  10 * of the License, or (at your option) any later version.
  11 * This program is distributed in the hope that it will be useful,
  12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
  13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  14 * GNU General Public License for more details.
  15 */
  16
  17#ifndef __MXSFB_REGS_H__
  18#define __MXSFB_REGS_H__
  19
  20#define REG_SET 4
  21#define REG_CLR 8
  22
  23#define LCDC_CTRL                       0x00
  24#define LCDC_CTRL1                      0x10
  25#define LCDC_V3_TRANSFER_COUNT          0x20
  26#define LCDC_V4_TRANSFER_COUNT          0x30
  27#define LCDC_V4_CUR_BUF                 0x40
  28#define LCDC_V4_NEXT_BUF                0x50
  29#define LCDC_V3_CUR_BUF                 0x30
  30#define LCDC_V3_NEXT_BUF                0x40
  31#define LCDC_VDCTRL0                    0x70
  32#define LCDC_VDCTRL1                    0x80
  33#define LCDC_VDCTRL2                    0x90
  34#define LCDC_VDCTRL3                    0xa0
  35#define LCDC_VDCTRL4                    0xb0
  36#define LCDC_V4_DEBUG0                  0x1d0
  37#define LCDC_V3_DEBUG0                  0x1f0
  38
  39#define CTRL_SFTRST                     (1 << 31)
  40#define CTRL_CLKGATE                    (1 << 30)
  41#define CTRL_BYPASS_COUNT               (1 << 19)
  42#define CTRL_VSYNC_MODE                 (1 << 18)
  43#define CTRL_DOTCLK_MODE                (1 << 17)
  44#define CTRL_DATA_SELECT                (1 << 16)
  45#define CTRL_SET_BUS_WIDTH(x)           (((x) & 0x3) << 10)
  46#define CTRL_GET_BUS_WIDTH(x)           (((x) >> 10) & 0x3)
  47#define CTRL_BUS_WIDTH_MASK             (0x3 << 10)
  48#define CTRL_SET_WORD_LENGTH(x)         (((x) & 0x3) << 8)
  49#define CTRL_GET_WORD_LENGTH(x)         (((x) >> 8) & 0x3)
  50#define CTRL_MASTER                     (1 << 5)
  51#define CTRL_DF16                       (1 << 3)
  52#define CTRL_DF18                       (1 << 2)
  53#define CTRL_DF24                       (1 << 1)
  54#define CTRL_RUN                        (1 << 0)
  55
  56#define CTRL1_FIFO_CLEAR                (1 << 21)
  57#define CTRL1_SET_BYTE_PACKAGING(x)     (((x) & 0xf) << 16)
  58#define CTRL1_GET_BYTE_PACKAGING(x)     (((x) >> 16) & 0xf)
  59#define CTRL1_CUR_FRAME_DONE_IRQ_EN     (1 << 13)
  60#define CTRL1_CUR_FRAME_DONE_IRQ        (1 << 9)
  61
  62#define TRANSFER_COUNT_SET_VCOUNT(x)    (((x) & 0xffff) << 16)
  63#define TRANSFER_COUNT_GET_VCOUNT(x)    (((x) >> 16) & 0xffff)
  64#define TRANSFER_COUNT_SET_HCOUNT(x)    ((x) & 0xffff)
  65#define TRANSFER_COUNT_GET_HCOUNT(x)    ((x) & 0xffff)
  66
  67#define VDCTRL0_ENABLE_PRESENT          (1 << 28)
  68#define VDCTRL0_VSYNC_ACT_HIGH          (1 << 27)
  69#define VDCTRL0_HSYNC_ACT_HIGH          (1 << 26)
  70#define VDCTRL0_DOTCLK_ACT_FALLING      (1 << 25)
  71#define VDCTRL0_ENABLE_ACT_HIGH         (1 << 24)
  72#define VDCTRL0_VSYNC_PERIOD_UNIT       (1 << 21)
  73#define VDCTRL0_VSYNC_PULSE_WIDTH_UNIT  (1 << 20)
  74#define VDCTRL0_HALF_LINE               (1 << 19)
  75#define VDCTRL0_HALF_LINE_MODE          (1 << 18)
  76#define VDCTRL0_SET_VSYNC_PULSE_WIDTH(x) ((x) & 0x3ffff)
  77#define VDCTRL0_GET_VSYNC_PULSE_WIDTH(x) ((x) & 0x3ffff)
  78
  79#define VDCTRL2_SET_HSYNC_PERIOD(x)     ((x) & 0x3ffff)
  80#define VDCTRL2_GET_HSYNC_PERIOD(x)     ((x) & 0x3ffff)
  81
  82#define VDCTRL3_MUX_SYNC_SIGNALS        (1 << 29)
  83#define VDCTRL3_VSYNC_ONLY              (1 << 28)
  84#define SET_HOR_WAIT_CNT(x)             (((x) & 0xfff) << 16)
  85#define GET_HOR_WAIT_CNT(x)             (((x) >> 16) & 0xfff)
  86#define SET_VERT_WAIT_CNT(x)            ((x) & 0xffff)
  87#define GET_VERT_WAIT_CNT(x)            ((x) & 0xffff)
  88
  89#define VDCTRL4_SET_DOTCLK_DLY(x)       (((x) & 0x7) << 29) /* v4 only */
  90#define VDCTRL4_GET_DOTCLK_DLY(x)       (((x) >> 29) & 0x7) /* v4 only */
  91#define VDCTRL4_SYNC_SIGNALS_ON         (1 << 18)
  92#define SET_DOTCLK_H_VALID_DATA_CNT(x)  ((x) & 0x3ffff)
  93
  94#define DEBUG0_HSYNC                    (1 < 26)
  95#define DEBUG0_VSYNC                    (1 < 25)
  96
  97#define MXSFB_MIN_XRES                  120
  98#define MXSFB_MIN_YRES                  120
  99#define MXSFB_MAX_XRES                  0xffff
 100#define MXSFB_MAX_YRES                  0xffff
 101
 102#define RED 0
 103#define GREEN 1
 104#define BLUE 2
 105#define TRANSP 3
 106
 107#define STMLCDIF_8BIT  1 /* pixel data bus to the display is of 8 bit width */
 108#define STMLCDIF_16BIT 0 /* pixel data bus to the display is of 16 bit width */
 109#define STMLCDIF_18BIT 2 /* pixel data bus to the display is of 18 bit width */
 110#define STMLCDIF_24BIT 3 /* pixel data bus to the display is of 24 bit width */
 111
 112#define MXSFB_SYNC_DATA_ENABLE_HIGH_ACT (1 << 6)
 113#define MXSFB_SYNC_DOTCLK_FALLING_ACT   (1 << 7) /* negative edge sampling */
 114
 115#endif /* __MXSFB_REGS_H__ */
 116