LXR linux/drivers/net/wan/pci200syn.c

   1/*
   2 * Goramo PCI200SYN synchronous serial card driver for Linux
   3 *
   4 * Copyright (C) 2002-2008 Krzysztof Halasa <khc@pm.waw.pl>
   5 *
   6 * This program is free software; you can redistribute it and/or modify it
   7 * under the terms of version 2 of the GNU General Public License
   8 * as published by the Free Software Foundation.
   9 *
  10 * For information see <http://www.kernel.org/pub/linux/utils/net/hdlc/>
  11 *
  12 * Sources of information:
  13 *    Hitachi HD64572 SCA-II User's Manual
  14 *    PLX Technology Inc. PCI9052 Data Book
  15 */
  16
  17#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
  18
  19#include <linux/module.h>
  20#include <linux/kernel.h>
  21#include <linux/capability.h>
  22#include <linux/slab.h>
  23#include <linux/types.h>
  24#include <linux/fcntl.h>
  25#include <linux/in.h>
  26#include <linux/string.h>
  27#include <linux/errno.h>
  28#include <linux/init.h>
  29#include <linux/ioport.h>
  30#include <linux/moduleparam.h>
  31#include <linux/netdevice.h>
  32#include <linux/hdlc.h>
  33#include <linux/pci.h>
  34#include <linux/delay.h>
  35#include <asm/io.h>
  36
  37#include "hd64572.h"
  38
  39#undef DEBUG_PKT
  40#define DEBUG_RINGS
  41
  42#define PCI200SYN_PLX_SIZE      0x80    /* PLX control window size (128b) */
  43#define PCI200SYN_SCA_SIZE      0x400   /* SCA window size (1Kb) */
  44#define MAX_TX_BUFFERS          10
  45
  46static int pci_clock_freq = 33000000;
  47#define CLOCK_BASE pci_clock_freq
  48
  49/*
  50 *      PLX PCI9052 local configuration and shared runtime registers.
  51 *      This structure can be used to access 9052 registers (memory mapped).
  52 */
  53typedef struct {
  54        u32 loc_addr_range[4];  /* 00-0Ch : Local Address Ranges */
  55        u32 loc_rom_range;      /* 10h : Local ROM Range */
  56        u32 loc_addr_base[4];   /* 14-20h : Local Address Base Addrs */
  57        u32 loc_rom_base;       /* 24h : Local ROM Base */
  58        u32 loc_bus_descr[4];   /* 28-34h : Local Bus Descriptors */
  59        u32 rom_bus_descr;      /* 38h : ROM Bus Descriptor */
  60        u32 cs_base[4];         /* 3C-48h : Chip Select Base Addrs */
  61        u32 intr_ctrl_stat;     /* 4Ch : Interrupt Control/Status */
  62        u32 init_ctrl;          /* 50h : EEPROM ctrl, Init Ctrl, etc */
  63}plx9052;
  64
  65
  66
  67typedef struct port_s {
  68        struct napi_struct napi;
  69        struct net_device *netdev;
  70        struct card_s *card;
  71        spinlock_t lock;        /* TX lock */
  72        sync_serial_settings settings;
  73        int rxpart;             /* partial frame received, next frame invalid*/
  74        unsigned short encoding;
  75        unsigned short parity;
  76        u16 rxin;               /* rx ring buffer 'in' pointer */
  77        u16 txin;               /* tx ring buffer 'in' and 'last' pointers */
  78        u16 txlast;
  79        u8 rxs, txs, tmc;       /* SCA registers */
  80        u8 chan;                /* physical port # - 0 or 1 */
  81}port_t;
  82
  83
  84
  85typedef struct card_s {
  86        u8 __iomem *rambase;    /* buffer memory base (virtual) */
  87        u8 __iomem *scabase;    /* SCA memory base (virtual) */
  88        plx9052 __iomem *plxbase;/* PLX registers memory base (virtual) */
  89        u16 rx_ring_buffers;    /* number of buffers in a ring */
  90        u16 tx_ring_buffers;
  91        u16 buff_offset;        /* offset of first buffer of first channel */
  92        u8 irq;                 /* interrupt request level */
  93
  94        port_t ports[2];
  95}card_t;
  96
  97
  98#define get_port(card, port)         (&card->ports[port])
  99#define sca_flush(card)              (sca_in(IER0, card));
 100
 101static inline void new_memcpy_toio(char __iomem *dest, char *src, int length)
 102{
 103        int len;
 104        do {
 105                len = length > 256 ? 256 : length;
 106                memcpy_toio(dest, src, len);
 107                dest += len;
 108                src += len;
 109                length -= len;
 110                readb(dest);
 111        } while (len);
 112}
 113
 114#undef memcpy_toio
 115#define memcpy_toio new_memcpy_toio
 116
 117#include "hd64572.c"
 118
 119
 120static void pci200_set_iface(port_t *port)
 121{
 122        card_t *card = port->card;
 123        u16 msci = get_msci(port);
 124        u8 rxs = port->rxs & CLK_BRG_MASK;
 125        u8 txs = port->txs & CLK_BRG_MASK;
 126
 127        sca_out(EXS_TES1, (port->chan ? MSCI1_OFFSET : MSCI0_OFFSET) + EXS,
 128                port->card);
 129        switch(port->settings.clock_type) {
 130        case CLOCK_INT:
 131                rxs |= CLK_BRG; /* BRG output */
 132                txs |= CLK_PIN_OUT | CLK_TX_RXCLK; /* RX clock */
 133                break;
 134
 135        case CLOCK_TXINT:
 136                rxs |= CLK_LINE; /* RXC input */
 137                txs |= CLK_PIN_OUT | CLK_BRG; /* BRG output */
 138                break;
 139
 140        case CLOCK_TXFROMRX:
 141                rxs |= CLK_LINE; /* RXC input */
 142                txs |= CLK_PIN_OUT | CLK_TX_RXCLK; /* RX clock */
 143                break;
 144
 145        default:                /* EXTernal clock */
 146                rxs |= CLK_LINE; /* RXC input */
 147                txs |= CLK_PIN_OUT | CLK_LINE; /* TXC input */
 148                break;
 149        }
 150
 151        port->rxs = rxs;
 152        port->txs = txs;
 153        sca_out(rxs, msci + RXS, card);
 154        sca_out(txs, msci + TXS, card);
 155        sca_set_port(port);
 156}
 157
 158
 159
 160static int pci200_open(struct net_device *dev)
 161{
 162        port_t *port = dev_to_port(dev);
 163
 164        int result = hdlc_open(dev);
 165        if (result)
 166                return result;
 167
 168        sca_open(dev);
 169        pci200_set_iface(port);
 170        sca_flush(port->card);
 171        return 0;
 172}
 173
 174
 175
 176static int pci200_close(struct net_device *dev)
 177{
 178        sca_close(dev);
 179        sca_flush(dev_to_port(dev)->card);
 180        hdlc_close(dev);
 181        return 0;
 182}
 183
 184
 185
 186static int pci200_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
 187{
 188        const size_t size = sizeof(sync_serial_settings);
 189        sync_serial_settings new_line;
 190        sync_serial_settings __user *line = ifr->ifr_settings.ifs_ifsu.sync;
 191        port_t *port = dev_to_port(dev);
 192
 193#ifdef DEBUG_RINGS
 194        if (cmd == SIOCDEVPRIVATE) {
 195                sca_dump_rings(dev);
 196                return 0;
 197        }
 198#endif
 199        if (cmd != SIOCWANDEV)
 200                return hdlc_ioctl(dev, ifr, cmd);
 201
 202        switch(ifr->ifr_settings.type) {
 203        case IF_GET_IFACE:
 204                ifr->ifr_settings.type = IF_IFACE_V35;
 205                if (ifr->ifr_settings.size < size) {
 206                        ifr->ifr_settings.size = size; /* data size wanted */
 207                        return -ENOBUFS;
 208                }
 209                if (copy_to_user(line, &port->settings, size))
 210                        return -EFAULT;
 211                return 0;
 212
 213        case IF_IFACE_V35:
 214        case IF_IFACE_SYNC_SERIAL:
 215                if (!capable(CAP_NET_ADMIN))
 216                        return -EPERM;
 217
 218                if (copy_from_user(&new_line, line, size))
 219                        return -EFAULT;
 220
 221                if (new_line.clock_type != CLOCK_EXT &&
 222                    new_line.clock_type != CLOCK_TXFROMRX &&
 223                    new_line.clock_type != CLOCK_INT &&
 224                    new_line.clock_type != CLOCK_TXINT)
 225                        return -EINVAL; /* No such clock setting */
 226
 227                if (new_line.loopback != 0 && new_line.loopback != 1)
 228                        return -EINVAL;
 229
 230                memcpy(&port->settings, &new_line, size); /* Update settings */
 231                pci200_set_iface(port);
 232                sca_flush(port->card);
 233                return 0;
 234
 235        default:
 236                return hdlc_ioctl(dev, ifr, cmd);
 237        }
 238}
 239
 240
 241
 242static void pci200_pci_remove_one(struct pci_dev *pdev)
 243{
 244        int i;
 245        card_t *card = pci_get_drvdata(pdev);
 246
 247        for (i = 0; i < 2; i++)
 248                if (card->ports[i].card)
 249                        unregister_hdlc_device(card->ports[i].netdev);
 250
 251        if (card->irq)
 252                free_irq(card->irq, card);
 253
 254        if (card->rambase)
 255                iounmap(card->rambase);
 256        if (card->scabase)
 257                iounmap(card->scabase);
 258        if (card->plxbase)
 259                iounmap(card->plxbase);
 260
 261        pci_release_regions(pdev);
 262        pci_disable_device(pdev);
 263        if (card->ports[0].netdev)
 264                free_netdev(card->ports[0].netdev);
 265        if (card->ports[1].netdev)
 266                free_netdev(card->ports[1].netdev);
 267        kfree(card);
 268}
 269
 270static const struct net_device_ops pci200_ops = {
 271        .ndo_open       = pci200_open,
 272        .ndo_stop       = pci200_close,
 273        .ndo_start_xmit = hdlc_start_xmit,
 274        .ndo_do_ioctl   = pci200_ioctl,
 275};
 276
 277static int pci200_pci_init_one(struct pci_dev *pdev,
 278                               const struct pci_device_id *ent)
 279{
 280        card_t *card;
 281        u32 __iomem *p;
 282        int i;
 283        u32 ramsize;
 284        u32 ramphys;            /* buffer memory base */
 285        u32 scaphys;            /* SCA memory base */
 286        u32 plxphys;            /* PLX registers memory base */
 287
 288        i = pci_enable_device(pdev);
 289        if (i)
 290                return i;
 291
 292        i = pci_request_regions(pdev, "PCI200SYN");
 293        if (i) {
 294                pci_disable_device(pdev);
 295                return i;
 296        }
 297
 298        card = kzalloc(sizeof(card_t), GFP_KERNEL);
 299        if (card == NULL) {
 300                pci_release_regions(pdev);
 301                pci_disable_device(pdev);
 302                return -ENOBUFS;
 303        }
 304        pci_set_drvdata(pdev, card);
 305        card->ports[0].netdev = alloc_hdlcdev(&card->ports[0]);
 306        card->ports[1].netdev = alloc_hdlcdev(&card->ports[1]);
 307        if (!card->ports[0].netdev || !card->ports[1].netdev) {
 308                pr_err("unable to allocate memory\n");
 309                pci200_pci_remove_one(pdev);
 310                return -ENOMEM;
 311        }
 312
 313        if (pci_resource_len(pdev, 0) != PCI200SYN_PLX_SIZE ||
 314            pci_resource_len(pdev, 2) != PCI200SYN_SCA_SIZE ||
 315            pci_resource_len(pdev, 3) < 16384) {
 316                pr_err("invalid card EEPROM parameters\n");
 317                pci200_pci_remove_one(pdev);
 318                return -EFAULT;
 319        }
 320
 321        plxphys = pci_resource_start(pdev,0) & PCI_BASE_ADDRESS_MEM_MASK;
 322        card->plxbase = ioremap(plxphys, PCI200SYN_PLX_SIZE);
 323
 324        scaphys = pci_resource_start(pdev,2) & PCI_BASE_ADDRESS_MEM_MASK;
 325        card->scabase = ioremap(scaphys, PCI200SYN_SCA_SIZE);
 326
 327        ramphys = pci_resource_start(pdev,3) & PCI_BASE_ADDRESS_MEM_MASK;
 328        card->rambase = pci_ioremap_bar(pdev, 3);
 329
 330        if (card->plxbase == NULL ||
 331            card->scabase == NULL ||
 332            card->rambase == NULL) {
 333                pr_err("ioremap() failed\n");
 334                pci200_pci_remove_one(pdev);
 335                return -EFAULT;
 336        }
 337
 338        /* Reset PLX */
 339        p = &card->plxbase->init_ctrl;
 340        writel(readl(p) | 0x40000000, p);
 341        readl(p);               /* Flush the write - do not use sca_flush */
 342        udelay(1);
 343
 344        writel(readl(p) & ~0x40000000, p);
 345        readl(p);               /* Flush the write - do not use sca_flush */
 346        udelay(1);
 347
 348        ramsize = sca_detect_ram(card, card->rambase,
 349                                 pci_resource_len(pdev, 3));
 350
 351        /* number of TX + RX buffers for one port - this is dual port card */
 352        i = ramsize / (2 * (sizeof(pkt_desc) + HDLC_MAX_MRU));
 353        card->tx_ring_buffers = min(i / 2, MAX_TX_BUFFERS);
 354        card->rx_ring_buffers = i - card->tx_ring_buffers;
 355
 356        card->buff_offset = 2 * sizeof(pkt_desc) * (card->tx_ring_buffers +
 357                                                    card->rx_ring_buffers);
 358
 359        pr_info("%u KB RAM at 0x%x, IRQ%u, using %u TX + %u RX packets rings\n",
 360                ramsize / 1024, ramphys,
 361                pdev->irq, card->tx_ring_buffers, card->rx_ring_buffers);
 362
 363        if (card->tx_ring_buffers < 1) {
 364                pr_err("RAM test failed\n");
 365                pci200_pci_remove_one(pdev);
 366                return -EFAULT;
 367        }
 368
 369        /* Enable interrupts on the PCI bridge */
 370        p = &card->plxbase->intr_ctrl_stat;
 371        writew(readw(p) | 0x0040, p);
 372
 373        /* Allocate IRQ */
 374        if (request_irq(pdev->irq, sca_intr, IRQF_SHARED, "pci200syn", card)) {
 375                pr_warn("could not allocate IRQ%d\n", pdev->irq);
 376                pci200_pci_remove_one(pdev);
 377                return -EBUSY;
 378        }
 379        card->irq = pdev->irq;
 380
 381        sca_init(card, 0);
 382
 383        for (i = 0; i < 2; i++) {
 384                port_t *port = &card->ports[i];
 385                struct net_device *dev = port->netdev;
 386                hdlc_device *hdlc = dev_to_hdlc(dev);
 387                port->chan = i;
 388
 389                spin_lock_init(&port->lock);
 390                dev->irq = card->irq;
 391                dev->mem_start = ramphys;
 392                dev->mem_end = ramphys + ramsize - 1;
 393                dev->tx_queue_len = 50;
 394                dev->netdev_ops = &pci200_ops;
 395                hdlc->attach = sca_attach;
 396                hdlc->xmit = sca_xmit;
 397                port->settings.clock_type = CLOCK_EXT;
 398                port->card = card;
 399                sca_init_port(port);
 400                if (register_hdlc_device(dev)) {
 401                        pr_err("unable to register hdlc device\n");
 402                        port->card = NULL;
 403                        pci200_pci_remove_one(pdev);
 404                        return -ENOBUFS;
 405                }
 406
 407                netdev_info(dev, "PCI200SYN channel %d\n", port->chan);
 408        }
 409
 410        sca_flush(card);
 411        return 0;
 412}
 413
 414
 415
 416static const struct pci_device_id pci200_pci_tbl[] = {
 417        { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, PCI_VENDOR_ID_PLX,
 418          PCI_DEVICE_ID_PLX_PCI200SYN, 0, 0, 0 },
 419        { 0, }
 420};
 421
 422
 423static struct pci_driver pci200_pci_driver = {
 424        .name           = "PCI200SYN",
 425        .id_table       = pci200_pci_tbl,
 426        .probe          = pci200_pci_init_one,
 427        .remove         = pci200_pci_remove_one,
 428};
 429
 430
 431static int __init pci200_init_module(void)
 432{
 433        if (pci_clock_freq < 1000000 || pci_clock_freq > 80000000) {
 434                pr_err("Invalid PCI clock frequency\n");
 435                return -EINVAL;
 436        }
 437        return pci_register_driver(&pci200_pci_driver);
 438}
 439
 440
 441
 442static void __exit pci200_cleanup_module(void)
 443{
 444        pci_unregister_driver(&pci200_pci_driver);
 445}
 446
 447MODULE_AUTHOR("Krzysztof Halasa <khc@pm.waw.pl>");
 448MODULE_DESCRIPTION("Goramo PCI200SYN serial port driver");
 449MODULE_LICENSE("GPL v2");
 450MODULE_DEVICE_TABLE(pci, pci200_pci_tbl);
 451module_param(pci_clock_freq, int, 0444);
 452MODULE_PARM_DESC(pci_clock_freq, "System PCI clock frequency in Hz");
 453module_init(pci200_init_module);
 454module_exit(pci200_cleanup_module);
 455