linux/drivers/firmware/dcdbas.c
<<
>>
Prefs
   1/*
   2 *  dcdbas.c: Dell Systems Management Base Driver
   3 *
   4 *  The Dell Systems Management Base Driver provides a sysfs interface for
   5 *  systems management software to perform System Management Interrupts (SMIs)
   6 *  and Host Control Actions (power cycle or power off after OS shutdown) on
   7 *  Dell systems.
   8 *
   9 *  See Documentation/dcdbas.txt for more information.
  10 *
  11 *  Copyright (C) 1995-2006 Dell Inc.
  12 *
  13 *  This program is free software; you can redistribute it and/or modify
  14 *  it under the terms of the GNU General Public License v2.0 as published by
  15 *  the Free Software Foundation.
  16 *
  17 *  This program is distributed in the hope that it will be useful,
  18 *  but WITHOUT ANY WARRANTY; without even the implied warranty of
  19 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  20 *  GNU General Public License for more details.
  21 */
  22
  23#include <linux/platform_device.h>
  24#include <linux/dma-mapping.h>
  25#include <linux/errno.h>
  26#include <linux/init.h>
  27#include <linux/kernel.h>
  28#include <linux/mc146818rtc.h>
  29#include <linux/module.h>
  30#include <linux/reboot.h>
  31#include <linux/sched.h>
  32#include <linux/smp.h>
  33#include <linux/spinlock.h>
  34#include <linux/string.h>
  35#include <linux/types.h>
  36#include <linux/mutex.h>
  37#include <asm/io.h>
  38#include <asm/semaphore.h>
  39
  40#include "dcdbas.h"
  41
  42#define DRIVER_NAME             "dcdbas"
  43#define DRIVER_VERSION          "5.6.0-3.2"
  44#define DRIVER_DESCRIPTION      "Dell Systems Management Base Driver"
  45
  46static struct platform_device *dcdbas_pdev;
  47
  48static u8 *smi_data_buf;
  49static dma_addr_t smi_data_buf_handle;
  50static unsigned long smi_data_buf_size;
  51static u32 smi_data_buf_phys_addr;
  52static DEFINE_MUTEX(smi_data_lock);
  53
  54static unsigned int host_control_action;
  55static unsigned int host_control_smi_type;
  56static unsigned int host_control_on_shutdown;
  57
  58/**
  59 * smi_data_buf_free: free SMI data buffer
  60 */
  61static void smi_data_buf_free(void)
  62{
  63        if (!smi_data_buf)
  64                return;
  65
  66        dev_dbg(&dcdbas_pdev->dev, "%s: phys: %x size: %lu\n",
  67                __FUNCTION__, smi_data_buf_phys_addr, smi_data_buf_size);
  68
  69        dma_free_coherent(&dcdbas_pdev->dev, smi_data_buf_size, smi_data_buf,
  70                          smi_data_buf_handle);
  71        smi_data_buf = NULL;
  72        smi_data_buf_handle = 0;
  73        smi_data_buf_phys_addr = 0;
  74        smi_data_buf_size = 0;
  75}
  76
  77/**
  78 * smi_data_buf_realloc: grow SMI data buffer if needed
  79 */
  80static int smi_data_buf_realloc(unsigned long size)
  81{
  82        void *buf;
  83        dma_addr_t handle;
  84
  85        if (smi_data_buf_size >= size)
  86                return 0;
  87
  88        if (size > MAX_SMI_DATA_BUF_SIZE)
  89                return -EINVAL;
  90
  91        /* new buffer is needed */
  92        buf = dma_alloc_coherent(&dcdbas_pdev->dev, size, &handle, GFP_KERNEL);
  93        if (!buf) {
  94                dev_dbg(&dcdbas_pdev->dev,
  95                        "%s: failed to allocate memory size %lu\n",
  96                        __FUNCTION__, size);
  97                return -ENOMEM;
  98        }
  99        /* memory zeroed by dma_alloc_coherent */
 100
 101        if (smi_data_buf)
 102                memcpy(buf, smi_data_buf, smi_data_buf_size);
 103
 104        /* free any existing buffer */
 105        smi_data_buf_free();
 106
 107        /* set up new buffer for use */
 108        smi_data_buf = buf;
 109        smi_data_buf_handle = handle;
 110        smi_data_buf_phys_addr = (u32) virt_to_phys(buf);
 111        smi_data_buf_size = size;
 112
 113        dev_dbg(&dcdbas_pdev->dev, "%s: phys: %x size: %lu\n",
 114                __FUNCTION__, smi_data_buf_phys_addr, smi_data_buf_size);
 115
 116        return 0;
 117}
 118
 119static ssize_t smi_data_buf_phys_addr_show(struct device *dev,
 120                                           struct device_attribute *attr,
 121                                           char *buf)
 122{
 123        return sprintf(buf, "%x\n", smi_data_buf_phys_addr);
 124}
 125
 126static ssize_t smi_data_buf_size_show(struct device *dev,
 127                                      struct device_attribute *attr,
 128                                      char *buf)
 129{
 130        return sprintf(buf, "%lu\n", smi_data_buf_size);
 131}
 132
 133static ssize_t smi_data_buf_size_store(struct device *dev,
 134                                       struct device_attribute *attr,
 135                                       const char *buf, size_t count)
 136{
 137        unsigned long buf_size;
 138        ssize_t ret;
 139
 140        buf_size = simple_strtoul(buf, NULL, 10);
 141
 142        /* make sure SMI data buffer is at least buf_size */
 143        mutex_lock(&smi_data_lock);
 144        ret = smi_data_buf_realloc(buf_size);
 145        mutex_unlock(&smi_data_lock);
 146        if (ret)
 147                return ret;
 148
 149        return count;
 150}
 151
 152static ssize_t smi_data_read(struct kobject *kobj,
 153                             struct bin_attribute *bin_attr,
 154                             char *buf, loff_t pos, size_t count)
 155{
 156        size_t max_read;
 157        ssize_t ret;
 158
 159        mutex_lock(&smi_data_lock);
 160
 161        if (pos >= smi_data_buf_size) {
 162                ret = 0;
 163                goto out;
 164        }
 165
 166        max_read = smi_data_buf_size - pos;
 167        ret = min(max_read, count);
 168        memcpy(buf, smi_data_buf + pos, ret);
 169out:
 170        mutex_unlock(&smi_data_lock);
 171        return ret;
 172}
 173
 174static ssize_t smi_data_write(struct kobject *kobj,
 175                              struct bin_attribute *bin_attr,
 176                              char *buf, loff_t pos, size_t count)
 177{
 178        ssize_t ret;
 179
 180        if ((pos + count) > MAX_SMI_DATA_BUF_SIZE)
 181                return -EINVAL;
 182
 183        mutex_lock(&smi_data_lock);
 184
 185        ret = smi_data_buf_realloc(pos + count);
 186        if (ret)
 187                goto out;
 188
 189        memcpy(smi_data_buf + pos, buf, count);
 190        ret = count;
 191out:
 192        mutex_unlock(&smi_data_lock);
 193        return ret;
 194}
 195
 196static ssize_t host_control_action_show(struct device *dev,
 197                                        struct device_attribute *attr,
 198                                        char *buf)
 199{
 200        return sprintf(buf, "%u\n", host_control_action);
 201}
 202
 203static ssize_t host_control_action_store(struct device *dev,
 204                                         struct device_attribute *attr,
 205                                         const char *buf, size_t count)
 206{
 207        ssize_t ret;
 208
 209        /* make sure buffer is available for host control command */
 210        mutex_lock(&smi_data_lock);
 211        ret = smi_data_buf_realloc(sizeof(struct apm_cmd));
 212        mutex_unlock(&smi_data_lock);
 213        if (ret)
 214                return ret;
 215
 216        host_control_action = simple_strtoul(buf, NULL, 10);
 217        return count;
 218}
 219
 220static ssize_t host_control_smi_type_show(struct device *dev,
 221                                          struct device_attribute *attr,
 222                                          char *buf)
 223{
 224        return sprintf(buf, "%u\n", host_control_smi_type);
 225}
 226
 227static ssize_t host_control_smi_type_store(struct device *dev,
 228                                           struct device_attribute *attr,
 229                                           const char *buf, size_t count)
 230{
 231        host_control_smi_type = simple_strtoul(buf, NULL, 10);
 232        return count;
 233}
 234
 235static ssize_t host_control_on_shutdown_show(struct device *dev,
 236                                             struct device_attribute *attr,
 237                                             char *buf)
 238{
 239        return sprintf(buf, "%u\n", host_control_on_shutdown);
 240}
 241
 242static ssize_t host_control_on_shutdown_store(struct device *dev,
 243                                              struct device_attribute *attr,
 244                                              const char *buf, size_t count)
 245{
 246        host_control_on_shutdown = simple_strtoul(buf, NULL, 10);
 247        return count;
 248}
 249
 250/**
 251 * smi_request: generate SMI request
 252 *
 253 * Called with smi_data_lock.
 254 */
 255static int smi_request(struct smi_cmd *smi_cmd)
 256{
 257        cpumask_t old_mask;
 258        int ret = 0;
 259
 260        if (smi_cmd->magic != SMI_CMD_MAGIC) {
 261                dev_info(&dcdbas_pdev->dev, "%s: invalid magic value\n",
 262                         __FUNCTION__);
 263                return -EBADR;
 264        }
 265
 266        /* SMI requires CPU 0 */
 267        old_mask = current->cpus_allowed;
 268        set_cpus_allowed(current, cpumask_of_cpu(0));
 269        if (smp_processor_id() != 0) {
 270                dev_dbg(&dcdbas_pdev->dev, "%s: failed to get CPU 0\n",
 271                        __FUNCTION__);
 272                ret = -EBUSY;
 273                goto out;
 274        }
 275
 276        /* generate SMI */
 277        asm volatile (
 278                "outb %b0,%w1"
 279                : /* no output args */
 280                : "a" (smi_cmd->command_code),
 281                  "d" (smi_cmd->command_address),
 282                  "b" (smi_cmd->ebx),
 283                  "c" (smi_cmd->ecx)
 284                : "memory"
 285        );
 286
 287out:
 288        set_cpus_allowed(current, old_mask);
 289        return ret;
 290}
 291
 292/**
 293 * smi_request_store:
 294 *
 295 * The valid values are:
 296 * 0: zero SMI data buffer
 297 * 1: generate calling interface SMI
 298 * 2: generate raw SMI
 299 *
 300 * User application writes smi_cmd to smi_data before telling driver
 301 * to generate SMI.
 302 */
 303static ssize_t smi_request_store(struct device *dev,
 304                                 struct device_attribute *attr,
 305                                 const char *buf, size_t count)
 306{
 307        struct smi_cmd *smi_cmd;
 308        unsigned long val = simple_strtoul(buf, NULL, 10);
 309        ssize_t ret;
 310
 311        mutex_lock(&smi_data_lock);
 312
 313        if (smi_data_buf_size < sizeof(struct smi_cmd)) {
 314                ret = -ENODEV;
 315                goto out;
 316        }
 317        smi_cmd = (struct smi_cmd *)smi_data_buf;
 318
 319        switch (val) {
 320        case 2:
 321                /* Raw SMI */
 322                ret = smi_request(smi_cmd);
 323                if (!ret)
 324                        ret = count;
 325                break;
 326        case 1:
 327                /* Calling Interface SMI */
 328                smi_cmd->ebx = (u32) virt_to_phys(smi_cmd->command_buffer);
 329                ret = smi_request(smi_cmd);
 330                if (!ret)
 331                        ret = count;
 332                break;
 333        case 0:
 334                memset(smi_data_buf, 0, smi_data_buf_size);
 335                ret = count;
 336                break;
 337        default:
 338                ret = -EINVAL;
 339                break;
 340        }
 341
 342out:
 343        mutex_unlock(&smi_data_lock);
 344        return ret;
 345}
 346
 347/**
 348 * host_control_smi: generate host control SMI
 349 *
 350 * Caller must set up the host control command in smi_data_buf.
 351 */
 352static int host_control_smi(void)
 353{
 354        struct apm_cmd *apm_cmd;
 355        u8 *data;
 356        unsigned long flags;
 357        u32 num_ticks;
 358        s8 cmd_status;
 359        u8 index;
 360
 361        apm_cmd = (struct apm_cmd *)smi_data_buf;
 362        apm_cmd->status = ESM_STATUS_CMD_UNSUCCESSFUL;
 363
 364        switch (host_control_smi_type) {
 365        case HC_SMITYPE_TYPE1:
 366                spin_lock_irqsave(&rtc_lock, flags);
 367                /* write SMI data buffer physical address */
 368                data = (u8 *)&smi_data_buf_phys_addr;
 369                for (index = PE1300_CMOS_CMD_STRUCT_PTR;
 370                     index < (PE1300_CMOS_CMD_STRUCT_PTR + 4);
 371                     index++, data++) {
 372                        outb(index,
 373                             (CMOS_BASE_PORT + CMOS_PAGE2_INDEX_PORT_PIIX4));
 374                        outb(*data,
 375                             (CMOS_BASE_PORT + CMOS_PAGE2_DATA_PORT_PIIX4));
 376                }
 377
 378                /* first set status to -1 as called by spec */
 379                cmd_status = ESM_STATUS_CMD_UNSUCCESSFUL;
 380                outb((u8) cmd_status, PCAT_APM_STATUS_PORT);
 381
 382                /* generate SMM call */
 383                outb(ESM_APM_CMD, PCAT_APM_CONTROL_PORT);
 384                spin_unlock_irqrestore(&rtc_lock, flags);
 385
 386                /* wait a few to see if it executed */
 387                num_ticks = TIMEOUT_USEC_SHORT_SEMA_BLOCKING;
 388                while ((cmd_status = inb(PCAT_APM_STATUS_PORT))
 389                       == ESM_STATUS_CMD_UNSUCCESSFUL) {
 390                        num_ticks--;
 391                        if (num_ticks == EXPIRED_TIMER)
 392                                return -ETIME;
 393                }
 394                break;
 395
 396        case HC_SMITYPE_TYPE2:
 397        case HC_SMITYPE_TYPE3:
 398                spin_lock_irqsave(&rtc_lock, flags);
 399                /* write SMI data buffer physical address */
 400                data = (u8 *)&smi_data_buf_phys_addr;
 401                for (index = PE1400_CMOS_CMD_STRUCT_PTR;
 402                     index < (PE1400_CMOS_CMD_STRUCT_PTR + 4);
 403                     index++, data++) {
 404                        outb(index, (CMOS_BASE_PORT + CMOS_PAGE1_INDEX_PORT));
 405                        outb(*data, (CMOS_BASE_PORT + CMOS_PAGE1_DATA_PORT));
 406                }
 407
 408                /* generate SMM call */
 409                if (host_control_smi_type == HC_SMITYPE_TYPE3)
 410                        outb(ESM_APM_CMD, PCAT_APM_CONTROL_PORT);
 411                else
 412                        outb(ESM_APM_CMD, PE1400_APM_CONTROL_PORT);
 413
 414                /* restore RTC index pointer since it was written to above */
 415                CMOS_READ(RTC_REG_C);
 416                spin_unlock_irqrestore(&rtc_lock, flags);
 417
 418                /* read control port back to serialize write */
 419                cmd_status = inb(PE1400_APM_CONTROL_PORT);
 420
 421                /* wait a few to see if it executed */
 422                num_ticks = TIMEOUT_USEC_SHORT_SEMA_BLOCKING;
 423                while (apm_cmd->status == ESM_STATUS_CMD_UNSUCCESSFUL) {
 424                        num_ticks--;
 425                        if (num_ticks == EXPIRED_TIMER)
 426                                return -ETIME;
 427                }
 428                break;
 429
 430        default:
 431                dev_dbg(&dcdbas_pdev->dev, "%s: invalid SMI type %u\n",
 432                        __FUNCTION__, host_control_smi_type);
 433                return -ENOSYS;
 434        }
 435
 436        return 0;
 437}
 438
 439/**
 440 * dcdbas_host_control: initiate host control
 441 *
 442 * This function is called by the driver after the system has
 443 * finished shutting down if the user application specified a
 444 * host control action to perform on shutdown.  It is safe to
 445 * use smi_data_buf at this point because the system has finished
 446 * shutting down and no userspace apps are running.
 447 */
 448static void dcdbas_host_control(void)
 449{
 450        struct apm_cmd *apm_cmd;
 451        u8 action;
 452
 453        if (host_control_action == HC_ACTION_NONE)
 454                return;
 455
 456        action = host_control_action;
 457        host_control_action = HC_ACTION_NONE;
 458
 459        if (!smi_data_buf) {
 460                dev_dbg(&dcdbas_pdev->dev, "%s: no SMI buffer\n", __FUNCTION__);
 461                return;
 462        }
 463
 464        if (smi_data_buf_size < sizeof(struct apm_cmd)) {
 465                dev_dbg(&dcdbas_pdev->dev, "%s: SMI buffer too small\n",
 466                        __FUNCTION__);
 467                return;
 468        }
 469
 470        apm_cmd = (struct apm_cmd *)smi_data_buf;
 471
 472        /* power off takes precedence */
 473        if (action & HC_ACTION_HOST_CONTROL_POWEROFF) {
 474                apm_cmd->command = ESM_APM_POWER_CYCLE;
 475                apm_cmd->reserved = 0;
 476                *((s16 *)&apm_cmd->parameters.shortreq.parm[0]) = (s16) 0;
 477                host_control_smi();
 478        } else if (action & HC_ACTION_HOST_CONTROL_POWERCYCLE) {
 479                apm_cmd->command = ESM_APM_POWER_CYCLE;
 480                apm_cmd->reserved = 0;
 481                *((s16 *)&apm_cmd->parameters.shortreq.parm[0]) = (s16) 20;
 482                host_control_smi();
 483        }
 484}
 485
 486/**
 487 * dcdbas_reboot_notify: handle reboot notification for host control
 488 */
 489static int dcdbas_reboot_notify(struct notifier_block *nb, unsigned long code,
 490                                void *unused)
 491{
 492        switch (code) {
 493        case SYS_DOWN:
 494        case SYS_HALT:
 495        case SYS_POWER_OFF:
 496                if (host_control_on_shutdown) {
 497                        /* firmware is going to perform host control action */
 498                        printk(KERN_WARNING "Please wait for shutdown "
 499                               "action to complete...\n");
 500                        dcdbas_host_control();
 501                }
 502                break;
 503        }
 504
 505        return NOTIFY_DONE;
 506}
 507
 508static struct notifier_block dcdbas_reboot_nb = {
 509        .notifier_call = dcdbas_reboot_notify,
 510        .next = NULL,
 511        .priority = INT_MIN
 512};
 513
 514static DCDBAS_BIN_ATTR_RW(smi_data);
 515
 516static struct bin_attribute *dcdbas_bin_attrs[] = {
 517        &bin_attr_smi_data,
 518        NULL
 519};
 520
 521static DCDBAS_DEV_ATTR_RW(smi_data_buf_size);
 522static DCDBAS_DEV_ATTR_RO(smi_data_buf_phys_addr);
 523static DCDBAS_DEV_ATTR_WO(smi_request);
 524static DCDBAS_DEV_ATTR_RW(host_control_action);
 525static DCDBAS_DEV_ATTR_RW(host_control_smi_type);
 526static DCDBAS_DEV_ATTR_RW(host_control_on_shutdown);
 527
 528static struct attribute *dcdbas_dev_attrs[] = {
 529        &dev_attr_smi_data_buf_size.attr,
 530        &dev_attr_smi_data_buf_phys_addr.attr,
 531        &dev_attr_smi_request.attr,
 532        &dev_attr_host_control_action.attr,
 533        &dev_attr_host_control_smi_type.attr,
 534        &dev_attr_host_control_on_shutdown.attr,
 535        NULL
 536};
 537
 538static struct attribute_group dcdbas_attr_group = {
 539        .attrs = dcdbas_dev_attrs,
 540};
 541
 542static int __devinit dcdbas_probe(struct platform_device *dev)
 543{
 544        int i, error;
 545
 546        host_control_action = HC_ACTION_NONE;
 547        host_control_smi_type = HC_SMITYPE_NONE;
 548
 549        /*
 550         * BIOS SMI calls require buffer addresses be in 32-bit address space.
 551         * This is done by setting the DMA mask below.
 552         */
 553        dcdbas_pdev->dev.coherent_dma_mask = DMA_32BIT_MASK;
 554        dcdbas_pdev->dev.dma_mask = &dcdbas_pdev->dev.coherent_dma_mask;
 555
 556        error = sysfs_create_group(&dev->dev.kobj, &dcdbas_attr_group);
 557        if (error)
 558                return error;
 559
 560        for (i = 0; dcdbas_bin_attrs[i]; i++) {
 561                error = sysfs_create_bin_file(&dev->dev.kobj,
 562                                              dcdbas_bin_attrs[i]);
 563                if (error) {
 564                        while (--i >= 0)
 565                                sysfs_remove_bin_file(&dev->dev.kobj,
 566                                                      dcdbas_bin_attrs[i]);
 567                        sysfs_remove_group(&dev->dev.kobj, &dcdbas_attr_group);
 568                        return error;
 569                }
 570        }
 571
 572        register_reboot_notifier(&dcdbas_reboot_nb);
 573
 574        dev_info(&dev->dev, "%s (version %s)\n",
 575                 DRIVER_DESCRIPTION, DRIVER_VERSION);
 576
 577        return 0;
 578}
 579
 580static int __devexit dcdbas_remove(struct platform_device *dev)
 581{
 582        int i;
 583
 584        unregister_reboot_notifier(&dcdbas_reboot_nb);
 585        for (i = 0; dcdbas_bin_attrs[i]; i++)
 586                sysfs_remove_bin_file(&dev->dev.kobj, dcdbas_bin_attrs[i]);
 587        sysfs_remove_group(&dev->dev.kobj, &dcdbas_attr_group);
 588
 589        return 0;
 590}
 591
 592static struct platform_driver dcdbas_driver = {
 593        .driver         = {
 594                .name   = DRIVER_NAME,
 595                .owner  = THIS_MODULE,
 596        },
 597        .probe          = dcdbas_probe,
 598        .remove         = __devexit_p(dcdbas_remove),
 599};
 600
 601/**
 602 * dcdbas_init: initialize driver
 603 */
 604static int __init dcdbas_init(void)
 605{
 606        int error;
 607
 608        error = platform_driver_register(&dcdbas_driver);
 609        if (error)
 610                return error;
 611
 612        dcdbas_pdev = platform_device_alloc(DRIVER_NAME, -1);
 613        if (!dcdbas_pdev) {
 614                error = -ENOMEM;
 615                goto err_unregister_driver;
 616        }
 617
 618        error = platform_device_add(dcdbas_pdev);
 619        if (error)
 620                goto err_free_device;
 621
 622        return 0;
 623
 624 err_free_device:
 625        platform_device_put(dcdbas_pdev);
 626 err_unregister_driver:
 627        platform_driver_unregister(&dcdbas_driver);
 628        return error;
 629}
 630
 631/**
 632 * dcdbas_exit: perform driver cleanup
 633 */
 634static void __exit dcdbas_exit(void)
 635{
 636        /*
 637         * make sure functions that use dcdbas_pdev are called
 638         * before platform_device_unregister
 639         */
 640        unregister_reboot_notifier(&dcdbas_reboot_nb);
 641        smi_data_buf_free();
 642        platform_device_unregister(dcdbas_pdev);
 643        platform_driver_unregister(&dcdbas_driver);
 644
 645        /*
 646         * We have to free the buffer here instead of dcdbas_remove
 647         * because only in module exit function we can be sure that
 648         * all sysfs attributes belonging to this module have been
 649         * released.
 650         */
 651        smi_data_buf_free();
 652}
 653
 654module_init(dcdbas_init);
 655module_exit(dcdbas_exit);
 656
 657MODULE_DESCRIPTION(DRIVER_DESCRIPTION " (version " DRIVER_VERSION ")");
 658MODULE_VERSION(DRIVER_VERSION);
 659MODULE_AUTHOR("Dell Inc.");
 660MODULE_LICENSE("GPL");
 661
 662