linux/drivers/i2c/chips/menelaus.c
<<
>>
Prefs
   1/*
   2 * Copyright (C) 2004 Texas Instruments, Inc.
   3 *
   4 * Some parts based tps65010.c:
   5 * Copyright (C) 2004 Texas Instruments and
   6 * Copyright (C) 2004-2005 David Brownell
   7 *
   8 * Some parts based on tlv320aic24.c:
   9 * Copyright (C) by Kai Svahn <kai.svahn@nokia.com>
  10 *
  11 * Changes for interrupt handling and clean-up by
  12 * Tony Lindgren <tony@atomide.com> and Imre Deak <imre.deak@nokia.com>
  13 * Cleanup and generalized support for voltage setting by
  14 * Juha Yrjola
  15 * Added support for controlling VCORE and regulator sleep states,
  16 * Amit Kucheria <amit.kucheria@nokia.com>
  17 * Copyright (C) 2005, 2006 Nokia Corporation
  18 *
  19 * This program is free software; you can redistribute it and/or modify
  20 * it under the terms of the GNU General Public License as published by
  21 * the Free Software Foundation; either version 2 of the License, or
  22 * (at your option) any later version.
  23 *
  24 * This program is distributed in the hope that it will be useful,
  25 * but WITHOUT ANY WARRANTY; without even the implied warranty of
  26 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  27 * GNU General Public License for more details.
  28 *
  29 * You should have received a copy of the GNU General Public License
  30 * along with this program; if not, write to the Free Software
  31 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  32 */
  33
  34#include <linux/module.h>
  35#include <linux/i2c.h>
  36#include <linux/interrupt.h>
  37#include <linux/sched.h>
  38#include <linux/mutex.h>
  39#include <linux/workqueue.h>
  40#include <linux/delay.h>
  41#include <linux/rtc.h>
  42#include <linux/bcd.h>
  43
  44#include <asm/mach-types.h>
  45#include <asm/mach/irq.h>
  46
  47#include <asm/arch/gpio.h>
  48#include <asm/arch/menelaus.h>
  49
  50#define DRIVER_NAME                     "menelaus"
  51
  52#define MENELAUS_I2C_ADDRESS            0x72
  53
  54#define MENELAUS_REV                    0x01
  55#define MENELAUS_VCORE_CTRL1            0x02
  56#define MENELAUS_VCORE_CTRL2            0x03
  57#define MENELAUS_VCORE_CTRL3            0x04
  58#define MENELAUS_VCORE_CTRL4            0x05
  59#define MENELAUS_VCORE_CTRL5            0x06
  60#define MENELAUS_DCDC_CTRL1             0x07
  61#define MENELAUS_DCDC_CTRL2             0x08
  62#define MENELAUS_DCDC_CTRL3             0x09
  63#define MENELAUS_LDO_CTRL1              0x0A
  64#define MENELAUS_LDO_CTRL2              0x0B
  65#define MENELAUS_LDO_CTRL3              0x0C
  66#define MENELAUS_LDO_CTRL4              0x0D
  67#define MENELAUS_LDO_CTRL5              0x0E
  68#define MENELAUS_LDO_CTRL6              0x0F
  69#define MENELAUS_LDO_CTRL7              0x10
  70#define MENELAUS_LDO_CTRL8              0x11
  71#define MENELAUS_SLEEP_CTRL1            0x12
  72#define MENELAUS_SLEEP_CTRL2            0x13
  73#define MENELAUS_DEVICE_OFF             0x14
  74#define MENELAUS_OSC_CTRL               0x15
  75#define MENELAUS_DETECT_CTRL            0x16
  76#define MENELAUS_INT_MASK1              0x17
  77#define MENELAUS_INT_MASK2              0x18
  78#define MENELAUS_INT_STATUS1            0x19
  79#define MENELAUS_INT_STATUS2            0x1A
  80#define MENELAUS_INT_ACK1               0x1B
  81#define MENELAUS_INT_ACK2               0x1C
  82#define MENELAUS_GPIO_CTRL              0x1D
  83#define MENELAUS_GPIO_IN                0x1E
  84#define MENELAUS_GPIO_OUT               0x1F
  85#define MENELAUS_BBSMS                  0x20
  86#define MENELAUS_RTC_CTRL               0x21
  87#define MENELAUS_RTC_UPDATE             0x22
  88#define MENELAUS_RTC_SEC                0x23
  89#define MENELAUS_RTC_MIN                0x24
  90#define MENELAUS_RTC_HR                 0x25
  91#define MENELAUS_RTC_DAY                0x26
  92#define MENELAUS_RTC_MON                0x27
  93#define MENELAUS_RTC_YR                 0x28
  94#define MENELAUS_RTC_WKDAY              0x29
  95#define MENELAUS_RTC_AL_SEC             0x2A
  96#define MENELAUS_RTC_AL_MIN             0x2B
  97#define MENELAUS_RTC_AL_HR              0x2C
  98#define MENELAUS_RTC_AL_DAY             0x2D
  99#define MENELAUS_RTC_AL_MON             0x2E
 100#define MENELAUS_RTC_AL_YR              0x2F
 101#define MENELAUS_RTC_COMP_MSB           0x30
 102#define MENELAUS_RTC_COMP_LSB           0x31
 103#define MENELAUS_S1_PULL_EN             0x32
 104#define MENELAUS_S1_PULL_DIR            0x33
 105#define MENELAUS_S2_PULL_EN             0x34
 106#define MENELAUS_S2_PULL_DIR            0x35
 107#define MENELAUS_MCT_CTRL1              0x36
 108#define MENELAUS_MCT_CTRL2              0x37
 109#define MENELAUS_MCT_CTRL3              0x38
 110#define MENELAUS_MCT_PIN_ST             0x39
 111#define MENELAUS_DEBOUNCE1              0x3A
 112
 113#define IH_MENELAUS_IRQS                12
 114#define MENELAUS_MMC_S1CD_IRQ           0       /* MMC slot 1 card change */
 115#define MENELAUS_MMC_S2CD_IRQ           1       /* MMC slot 2 card change */
 116#define MENELAUS_MMC_S1D1_IRQ           2       /* MMC DAT1 low in slot 1 */
 117#define MENELAUS_MMC_S2D1_IRQ           3       /* MMC DAT1 low in slot 2 */
 118#define MENELAUS_LOWBAT_IRQ             4       /* Low battery */
 119#define MENELAUS_HOTDIE_IRQ             5       /* Hot die detect */
 120#define MENELAUS_UVLO_IRQ               6       /* UVLO detect */
 121#define MENELAUS_TSHUT_IRQ              7       /* Thermal shutdown */
 122#define MENELAUS_RTCTMR_IRQ             8       /* RTC timer */
 123#define MENELAUS_RTCALM_IRQ             9       /* RTC alarm */
 124#define MENELAUS_RTCERR_IRQ             10      /* RTC error */
 125#define MENELAUS_PSHBTN_IRQ             11      /* Push button */
 126#define MENELAUS_RESERVED12_IRQ         12      /* Reserved */
 127#define MENELAUS_RESERVED13_IRQ         13      /* Reserved */
 128#define MENELAUS_RESERVED14_IRQ         14      /* Reserved */
 129#define MENELAUS_RESERVED15_IRQ         15      /* Reserved */
 130
 131static void menelaus_work(struct work_struct *_menelaus);
 132
 133struct menelaus_chip {
 134        struct mutex            lock;
 135        struct i2c_client       *client;
 136        struct work_struct      work;
 137#ifdef CONFIG_RTC_DRV_TWL92330
 138        struct rtc_device       *rtc;
 139        u8                      rtc_control;
 140        unsigned                uie:1;
 141#endif
 142        unsigned                vcore_hw_mode:1;
 143        u8                      mask1, mask2;
 144        void                    (*handlers[16])(struct menelaus_chip *);
 145        void                    (*mmc_callback)(void *data, u8 mask);
 146        void                    *mmc_callback_data;
 147};
 148
 149static struct menelaus_chip *the_menelaus;
 150
 151static int menelaus_write_reg(int reg, u8 value)
 152{
 153        int val = i2c_smbus_write_byte_data(the_menelaus->client, reg, value);
 154
 155        if (val < 0) {
 156                pr_err(DRIVER_NAME ": write error");
 157                return val;
 158        }
 159
 160        return 0;
 161}
 162
 163static int menelaus_read_reg(int reg)
 164{
 165        int val = i2c_smbus_read_byte_data(the_menelaus->client, reg);
 166
 167        if (val < 0)
 168                pr_err(DRIVER_NAME ": read error");
 169
 170        return val;
 171}
 172
 173static int menelaus_enable_irq(int irq)
 174{
 175        if (irq > 7) {
 176                irq -= 8;
 177                the_menelaus->mask2 &= ~(1 << irq);
 178                return menelaus_write_reg(MENELAUS_INT_MASK2,
 179                                the_menelaus->mask2);
 180        } else {
 181                the_menelaus->mask1 &= ~(1 << irq);
 182                return menelaus_write_reg(MENELAUS_INT_MASK1,
 183                                the_menelaus->mask1);
 184        }
 185}
 186
 187static int menelaus_disable_irq(int irq)
 188{
 189        if (irq > 7) {
 190                irq -= 8;
 191                the_menelaus->mask2 |= (1 << irq);
 192                return menelaus_write_reg(MENELAUS_INT_MASK2,
 193                                the_menelaus->mask2);
 194        } else {
 195                the_menelaus->mask1 |= (1 << irq);
 196                return menelaus_write_reg(MENELAUS_INT_MASK1,
 197                                the_menelaus->mask1);
 198        }
 199}
 200
 201static int menelaus_ack_irq(int irq)
 202{
 203        if (irq > 7)
 204                return menelaus_write_reg(MENELAUS_INT_ACK2, 1 << (irq - 8));
 205        else
 206                return menelaus_write_reg(MENELAUS_INT_ACK1, 1 << irq);
 207}
 208
 209/* Adds a handler for an interrupt. Does not run in interrupt context */
 210static int menelaus_add_irq_work(int irq,
 211                void (*handler)(struct menelaus_chip *))
 212{
 213        int ret = 0;
 214
 215        mutex_lock(&the_menelaus->lock);
 216        the_menelaus->handlers[irq] = handler;
 217        ret = menelaus_enable_irq(irq);
 218        mutex_unlock(&the_menelaus->lock);
 219
 220        return ret;
 221}
 222
 223/* Removes handler for an interrupt */
 224static int menelaus_remove_irq_work(int irq)
 225{
 226        int ret = 0;
 227
 228        mutex_lock(&the_menelaus->lock);
 229        ret = menelaus_disable_irq(irq);
 230        the_menelaus->handlers[irq] = NULL;
 231        mutex_unlock(&the_menelaus->lock);
 232
 233        return ret;
 234}
 235
 236/*
 237 * Gets scheduled when a card detect interrupt happens. Note that in some cases
 238 * this line is wired to card cover switch rather than the card detect switch
 239 * in each slot. In this case the cards are not seen by menelaus.
 240 * FIXME: Add handling for D1 too
 241 */
 242static void menelaus_mmc_cd_work(struct menelaus_chip *menelaus_hw)
 243{
 244        int reg;
 245        unsigned char card_mask = 0;
 246
 247        reg = menelaus_read_reg(MENELAUS_MCT_PIN_ST);
 248        if (reg < 0)
 249                return;
 250
 251        if (!(reg & 0x1))
 252                card_mask |= (1 << 0);
 253
 254        if (!(reg & 0x2))
 255                card_mask |= (1 << 1);
 256
 257        if (menelaus_hw->mmc_callback)
 258                menelaus_hw->mmc_callback(menelaus_hw->mmc_callback_data,
 259                                          card_mask);
 260}
 261
 262/*
 263 * Toggles the MMC slots between open-drain and push-pull mode.
 264 */
 265int menelaus_set_mmc_opendrain(int slot, int enable)
 266{
 267        int ret, val;
 268
 269        if (slot != 1 && slot != 2)
 270                return -EINVAL;
 271        mutex_lock(&the_menelaus->lock);
 272        ret = menelaus_read_reg(MENELAUS_MCT_CTRL1);
 273        if (ret < 0) {
 274                mutex_unlock(&the_menelaus->lock);
 275                return ret;
 276        }
 277        val = ret;
 278        if (slot == 1) {
 279                if (enable)
 280                        val |= 1 << 2;
 281                else
 282                        val &= ~(1 << 2);
 283        } else {
 284                if (enable)
 285                        val |= 1 << 3;
 286                else
 287                        val &= ~(1 << 3);
 288        }
 289        ret = menelaus_write_reg(MENELAUS_MCT_CTRL1, val);
 290        mutex_unlock(&the_menelaus->lock);
 291
 292        return ret;
 293}
 294EXPORT_SYMBOL(menelaus_set_mmc_opendrain);
 295
 296int menelaus_set_slot_sel(int enable)
 297{
 298        int ret;
 299
 300        mutex_lock(&the_menelaus->lock);
 301        ret = menelaus_read_reg(MENELAUS_GPIO_CTRL);
 302        if (ret < 0)
 303                goto out;
 304        ret |= 0x02;
 305        if (enable)
 306                ret |= 1 << 5;
 307        else
 308                ret &= ~(1 << 5);
 309        ret = menelaus_write_reg(MENELAUS_GPIO_CTRL, ret);
 310out:
 311        mutex_unlock(&the_menelaus->lock);
 312        return ret;
 313}
 314EXPORT_SYMBOL(menelaus_set_slot_sel);
 315
 316int menelaus_set_mmc_slot(int slot, int enable, int power, int cd_en)
 317{
 318        int ret, val;
 319
 320        if (slot != 1 && slot != 2)
 321                return -EINVAL;
 322        if (power >= 3)
 323                return -EINVAL;
 324
 325        mutex_lock(&the_menelaus->lock);
 326
 327        ret = menelaus_read_reg(MENELAUS_MCT_CTRL2);
 328        if (ret < 0)
 329                goto out;
 330        val = ret;
 331        if (slot == 1) {
 332                if (cd_en)
 333                        val |= (1 << 4) | (1 << 6);
 334                else
 335                        val &= ~((1 << 4) | (1 << 6));
 336        } else {
 337                if (cd_en)
 338                        val |= (1 << 5) | (1 << 7);
 339                else
 340                        val &= ~((1 << 5) | (1 << 7));
 341        }
 342        ret = menelaus_write_reg(MENELAUS_MCT_CTRL2, val);
 343        if (ret < 0)
 344                goto out;
 345
 346        ret = menelaus_read_reg(MENELAUS_MCT_CTRL3);
 347        if (ret < 0)
 348                goto out;
 349        val = ret;
 350        if (slot == 1) {
 351                if (enable)
 352                        val |= 1 << 0;
 353                else
 354                        val &= ~(1 << 0);
 355        } else {
 356                int b;
 357
 358                if (enable)
 359                        ret |= 1 << 1;
 360                else
 361                        ret &= ~(1 << 1);
 362                b = menelaus_read_reg(MENELAUS_MCT_CTRL2);
 363                b &= ~0x03;
 364                b |= power;
 365                ret = menelaus_write_reg(MENELAUS_MCT_CTRL2, b);
 366                if (ret < 0)
 367                        goto out;
 368        }
 369        /* Disable autonomous shutdown */
 370        val &= ~(0x03 << 2);
 371        ret = menelaus_write_reg(MENELAUS_MCT_CTRL3, val);
 372out:
 373        mutex_unlock(&the_menelaus->lock);
 374        return ret;
 375}
 376EXPORT_SYMBOL(menelaus_set_mmc_slot);
 377
 378int menelaus_register_mmc_callback(void (*callback)(void *data, u8 card_mask),
 379                                   void *data)
 380{
 381        int ret = 0;
 382
 383        the_menelaus->mmc_callback_data = data;
 384        the_menelaus->mmc_callback = callback;
 385        ret = menelaus_add_irq_work(MENELAUS_MMC_S1CD_IRQ,
 386                                    menelaus_mmc_cd_work);
 387        if (ret < 0)
 388                return ret;
 389        ret = menelaus_add_irq_work(MENELAUS_MMC_S2CD_IRQ,
 390                                    menelaus_mmc_cd_work);
 391        if (ret < 0)
 392                return ret;
 393        ret = menelaus_add_irq_work(MENELAUS_MMC_S1D1_IRQ,
 394                                    menelaus_mmc_cd_work);
 395        if (ret < 0)
 396                return ret;
 397        ret = menelaus_add_irq_work(MENELAUS_MMC_S2D1_IRQ,
 398                                    menelaus_mmc_cd_work);
 399
 400        return ret;
 401}
 402EXPORT_SYMBOL(menelaus_register_mmc_callback);
 403
 404void menelaus_unregister_mmc_callback(void)
 405{
 406        menelaus_remove_irq_work(MENELAUS_MMC_S1CD_IRQ);
 407        menelaus_remove_irq_work(MENELAUS_MMC_S2CD_IRQ);
 408        menelaus_remove_irq_work(MENELAUS_MMC_S1D1_IRQ);
 409        menelaus_remove_irq_work(MENELAUS_MMC_S2D1_IRQ);
 410
 411        the_menelaus->mmc_callback = NULL;
 412        the_menelaus->mmc_callback_data = 0;
 413}
 414EXPORT_SYMBOL(menelaus_unregister_mmc_callback);
 415
 416struct menelaus_vtg {
 417        const char *name;
 418        u8 vtg_reg;
 419        u8 vtg_shift;
 420        u8 vtg_bits;
 421        u8 mode_reg;
 422};
 423
 424struct menelaus_vtg_value {
 425        u16 vtg;
 426        u16 val;
 427};
 428
 429static int menelaus_set_voltage(const struct menelaus_vtg *vtg, int mV,
 430                                int vtg_val, int mode)
 431{
 432        int val, ret;
 433        struct i2c_client *c = the_menelaus->client;
 434
 435        mutex_lock(&the_menelaus->lock);
 436        if (vtg == 0)
 437                goto set_voltage;
 438
 439        ret = menelaus_read_reg(vtg->vtg_reg);
 440        if (ret < 0)
 441                goto out;
 442        val = ret & ~(((1 << vtg->vtg_bits) - 1) << vtg->vtg_shift);
 443        val |= vtg_val << vtg->vtg_shift;
 444
 445        dev_dbg(&c->dev, "Setting voltage '%s'"
 446                         "to %d mV (reg 0x%02x, val 0x%02x)\n",
 447                        vtg->name, mV, vtg->vtg_reg, val);
 448
 449        ret = menelaus_write_reg(vtg->vtg_reg, val);
 450        if (ret < 0)
 451                goto out;
 452set_voltage:
 453        ret = menelaus_write_reg(vtg->mode_reg, mode);
 454out:
 455        mutex_unlock(&the_menelaus->lock);
 456        if (ret == 0) {
 457                /* Wait for voltage to stabilize */
 458                msleep(1);
 459        }
 460        return ret;
 461}
 462
 463static int menelaus_get_vtg_value(int vtg, const struct menelaus_vtg_value *tbl,
 464                                  int n)
 465{
 466        int i;
 467
 468        for (i = 0; i < n; i++, tbl++)
 469                if (tbl->vtg == vtg)
 470                        return tbl->val;
 471        return -EINVAL;
 472}
 473
 474/*
 475 * Vcore can be programmed in two ways:
 476 * SW-controlled: Required voltage is programmed into VCORE_CTRL1
 477 * HW-controlled: Required range (roof-floor) is programmed into VCORE_CTRL3
 478 * and VCORE_CTRL4
 479 *
 480 * Call correct 'set' function accordingly
 481 */
 482
 483static const struct menelaus_vtg_value vcore_values[] = {
 484        { 1000, 0 },
 485        { 1025, 1 },
 486        { 1050, 2 },
 487        { 1075, 3 },
 488        { 1100, 4 },
 489        { 1125, 5 },
 490        { 1150, 6 },
 491        { 1175, 7 },
 492        { 1200, 8 },
 493        { 1225, 9 },
 494        { 1250, 10 },
 495        { 1275, 11 },
 496        { 1300, 12 },
 497        { 1325, 13 },
 498        { 1350, 14 },
 499        { 1375, 15 },
 500        { 1400, 16 },
 501        { 1425, 17 },
 502        { 1450, 18 },
 503};
 504
 505int menelaus_set_vcore_sw(unsigned int mV)
 506{
 507        int val, ret;
 508        struct i2c_client *c = the_menelaus->client;
 509
 510        val = menelaus_get_vtg_value(mV, vcore_values,
 511                                     ARRAY_SIZE(vcore_values));
 512        if (val < 0)
 513                return -EINVAL;
 514
 515        dev_dbg(&c->dev, "Setting VCORE to %d mV (val 0x%02x)\n", mV, val);
 516
 517        /* Set SW mode and the voltage in one go. */
 518        mutex_lock(&the_menelaus->lock);
 519        ret = menelaus_write_reg(MENELAUS_VCORE_CTRL1, val);
 520        if (ret == 0)
 521                the_menelaus->vcore_hw_mode = 0;
 522        mutex_unlock(&the_menelaus->lock);
 523        msleep(1);
 524
 525        return ret;
 526}
 527
 528int menelaus_set_vcore_hw(unsigned int roof_mV, unsigned int floor_mV)
 529{
 530        int fval, rval, val, ret;
 531        struct i2c_client *c = the_menelaus->client;
 532
 533        rval = menelaus_get_vtg_value(roof_mV, vcore_values,
 534                                      ARRAY_SIZE(vcore_values));
 535        if (rval < 0)
 536                return -EINVAL;
 537        fval = menelaus_get_vtg_value(floor_mV, vcore_values,
 538                                      ARRAY_SIZE(vcore_values));
 539        if (fval < 0)
 540                return -EINVAL;
 541
 542        dev_dbg(&c->dev, "Setting VCORE FLOOR to %d mV and ROOF to %d mV\n",
 543               floor_mV, roof_mV);
 544
 545        mutex_lock(&the_menelaus->lock);
 546        ret = menelaus_write_reg(MENELAUS_VCORE_CTRL3, fval);
 547        if (ret < 0)
 548                goto out;
 549        ret = menelaus_write_reg(MENELAUS_VCORE_CTRL4, rval);
 550        if (ret < 0)
 551                goto out;
 552        if (!the_menelaus->vcore_hw_mode) {
 553                val = menelaus_read_reg(MENELAUS_VCORE_CTRL1);
 554                /* HW mode, turn OFF byte comparator */
 555                val |= ((1 << 7) | (1 << 5));
 556                ret = menelaus_write_reg(MENELAUS_VCORE_CTRL1, val);
 557                the_menelaus->vcore_hw_mode = 1;
 558        }
 559        msleep(1);
 560out:
 561        mutex_unlock(&the_menelaus->lock);
 562        return ret;
 563}
 564
 565static const struct menelaus_vtg vmem_vtg = {
 566        .name = "VMEM",
 567        .vtg_reg = MENELAUS_LDO_CTRL1,
 568        .vtg_shift = 0,
 569        .vtg_bits = 2,
 570        .mode_reg = MENELAUS_LDO_CTRL3,
 571};
 572
 573static const struct menelaus_vtg_value vmem_values[] = {
 574        { 1500, 0 },
 575        { 1800, 1 },
 576        { 1900, 2 },
 577        { 2500, 3 },
 578};
 579
 580int menelaus_set_vmem(unsigned int mV)
 581{
 582        int val;
 583
 584        if (mV == 0)
 585                return menelaus_set_voltage(&vmem_vtg, 0, 0, 0);
 586
 587        val = menelaus_get_vtg_value(mV, vmem_values, ARRAY_SIZE(vmem_values));
 588        if (val < 0)
 589                return -EINVAL;
 590        return menelaus_set_voltage(&vmem_vtg, mV, val, 0x02);
 591}
 592EXPORT_SYMBOL(menelaus_set_vmem);
 593
 594static const struct menelaus_vtg vio_vtg = {
 595        .name = "VIO",
 596        .vtg_reg = MENELAUS_LDO_CTRL1,
 597        .vtg_shift = 2,
 598        .vtg_bits = 2,
 599        .mode_reg = MENELAUS_LDO_CTRL4,
 600};
 601
 602static const struct menelaus_vtg_value vio_values[] = {
 603        { 1500, 0 },
 604        { 1800, 1 },
 605        { 2500, 2 },
 606        { 2800, 3 },
 607};
 608
 609int menelaus_set_vio(unsigned int mV)
 610{
 611        int val;
 612
 613        if (mV == 0)
 614                return menelaus_set_voltage(&vio_vtg, 0, 0, 0);
 615
 616        val = menelaus_get_vtg_value(mV, vio_values, ARRAY_SIZE(vio_values));
 617        if (val < 0)
 618                return -EINVAL;
 619        return menelaus_set_voltage(&vio_vtg, mV, val, 0x02);
 620}
 621EXPORT_SYMBOL(menelaus_set_vio);
 622
 623static const struct menelaus_vtg_value vdcdc_values[] = {
 624        { 1500, 0 },
 625        { 1800, 1 },
 626        { 2000, 2 },
 627        { 2200, 3 },
 628        { 2400, 4 },
 629        { 2800, 5 },
 630        { 3000, 6 },
 631        { 3300, 7 },
 632};
 633
 634static const struct menelaus_vtg vdcdc2_vtg = {
 635        .name = "VDCDC2",
 636        .vtg_reg = MENELAUS_DCDC_CTRL1,
 637        .vtg_shift = 0,
 638        .vtg_bits = 3,
 639        .mode_reg = MENELAUS_DCDC_CTRL2,
 640};
 641
 642static const struct menelaus_vtg vdcdc3_vtg = {
 643        .name = "VDCDC3",
 644        .vtg_reg = MENELAUS_DCDC_CTRL1,
 645        .vtg_shift = 3,
 646        .vtg_bits = 3,
 647        .mode_reg = MENELAUS_DCDC_CTRL3,
 648};
 649
 650int menelaus_set_vdcdc(int dcdc, unsigned int mV)
 651{
 652        const struct menelaus_vtg *vtg;
 653        int val;
 654
 655        if (dcdc != 2 && dcdc != 3)
 656                return -EINVAL;
 657        if (dcdc == 2)
 658                vtg = &vdcdc2_vtg;
 659        else
 660                vtg = &vdcdc3_vtg;
 661
 662        if (mV == 0)
 663                return menelaus_set_voltage(vtg, 0, 0, 0);
 664
 665        val = menelaus_get_vtg_value(mV, vdcdc_values,
 666                                     ARRAY_SIZE(vdcdc_values));
 667        if (val < 0)
 668                return -EINVAL;
 669        return menelaus_set_voltage(vtg, mV, val, 0x03);
 670}
 671
 672static const struct menelaus_vtg_value vmmc_values[] = {
 673        { 1850, 0 },
 674        { 2800, 1 },
 675        { 3000, 2 },
 676        { 3100, 3 },
 677};
 678
 679static const struct menelaus_vtg vmmc_vtg = {
 680        .name = "VMMC",
 681        .vtg_reg = MENELAUS_LDO_CTRL1,
 682        .vtg_shift = 6,
 683        .vtg_bits = 2,
 684        .mode_reg = MENELAUS_LDO_CTRL7,
 685};
 686
 687int menelaus_set_vmmc(unsigned int mV)
 688{
 689        int val;
 690
 691        if (mV == 0)
 692                return menelaus_set_voltage(&vmmc_vtg, 0, 0, 0);
 693
 694        val = menelaus_get_vtg_value(mV, vmmc_values, ARRAY_SIZE(vmmc_values));
 695        if (val < 0)
 696                return -EINVAL;
 697        return menelaus_set_voltage(&vmmc_vtg, mV, val, 0x02);
 698}
 699EXPORT_SYMBOL(menelaus_set_vmmc);
 700
 701
 702static const struct menelaus_vtg_value vaux_values[] = {
 703        { 1500, 0 },
 704        { 1800, 1 },
 705        { 2500, 2 },
 706        { 2800, 3 },
 707};
 708
 709static const struct menelaus_vtg vaux_vtg = {
 710        .name = "VAUX",
 711        .vtg_reg = MENELAUS_LDO_CTRL1,
 712        .vtg_shift = 4,
 713        .vtg_bits = 2,
 714        .mode_reg = MENELAUS_LDO_CTRL6,
 715};
 716
 717int menelaus_set_vaux(unsigned int mV)
 718{
 719        int val;
 720
 721        if (mV == 0)
 722                return menelaus_set_voltage(&vaux_vtg, 0, 0, 0);
 723
 724        val = menelaus_get_vtg_value(mV, vaux_values, ARRAY_SIZE(vaux_values));
 725        if (val < 0)
 726                return -EINVAL;
 727        return menelaus_set_voltage(&vaux_vtg, mV, val, 0x02);
 728}
 729EXPORT_SYMBOL(menelaus_set_vaux);
 730
 731int menelaus_get_slot_pin_states(void)
 732{
 733        return menelaus_read_reg(MENELAUS_MCT_PIN_ST);
 734}
 735EXPORT_SYMBOL(menelaus_get_slot_pin_states);
 736
 737int menelaus_set_regulator_sleep(int enable, u32 val)
 738{
 739        int t, ret;
 740        struct i2c_client *c = the_menelaus->client;
 741
 742        mutex_lock(&the_menelaus->lock);
 743        ret = menelaus_write_reg(MENELAUS_SLEEP_CTRL2, val);
 744        if (ret < 0)
 745                goto out;
 746
 747        dev_dbg(&c->dev, "regulator sleep configuration: %02x\n", val);
 748
 749        ret = menelaus_read_reg(MENELAUS_GPIO_CTRL);
 750        if (ret < 0)
 751                goto out;
 752        t = ((1 << 6) | 0x04);
 753        if (enable)
 754                ret |= t;
 755        else
 756                ret &= ~t;
 757        ret = menelaus_write_reg(MENELAUS_GPIO_CTRL, ret);
 758out:
 759        mutex_unlock(&the_menelaus->lock);
 760        return ret;
 761}
 762
 763/*-----------------------------------------------------------------------*/
 764
 765/* Handles Menelaus interrupts. Does not run in interrupt context */
 766static void menelaus_work(struct work_struct *_menelaus)
 767{
 768        struct menelaus_chip *menelaus =
 769                        container_of(_menelaus, struct menelaus_chip, work);
 770        void (*handler)(struct menelaus_chip *menelaus);
 771
 772        while (1) {
 773                unsigned isr;
 774
 775                isr = (menelaus_read_reg(MENELAUS_INT_STATUS2)
 776                                & ~menelaus->mask2) << 8;
 777                isr |= menelaus_read_reg(MENELAUS_INT_STATUS1)
 778                                & ~menelaus->mask1;
 779                if (!isr)
 780                        break;
 781
 782                while (isr) {
 783                        int irq = fls(isr) - 1;
 784                        isr &= ~(1 << irq);
 785
 786                        mutex_lock(&menelaus->lock);
 787                        menelaus_disable_irq(irq);
 788                        menelaus_ack_irq(irq);
 789                        handler = menelaus->handlers[irq];
 790                        if (handler)
 791                                handler(menelaus);
 792                        menelaus_enable_irq(irq);
 793                        mutex_unlock(&menelaus->lock);
 794                }
 795        }
 796        enable_irq(menelaus->client->irq);
 797}
 798
 799/*
 800 * We cannot use I2C in interrupt context, so we just schedule work.
 801 */
 802static irqreturn_t menelaus_irq(int irq, void *_menelaus)
 803{
 804        struct menelaus_chip *menelaus = _menelaus;
 805
 806        disable_irq_nosync(irq);
 807        (void)schedule_work(&menelaus->work);
 808
 809        return IRQ_HANDLED;
 810}
 811
 812/*-----------------------------------------------------------------------*/
 813
 814/*
 815 * The RTC needs to be set once, then it runs on backup battery power.
 816 * It supports alarms, including system wake alarms (from some modes);
 817 * and 1/second IRQs if requested.
 818 */
 819#ifdef CONFIG_RTC_DRV_TWL92330
 820
 821#define RTC_CTRL_RTC_EN         (1 << 0)
 822#define RTC_CTRL_AL_EN          (1 << 1)
 823#define RTC_CTRL_MODE12         (1 << 2)
 824#define RTC_CTRL_EVERY_MASK     (3 << 3)
 825#define RTC_CTRL_EVERY_SEC      (0 << 3)
 826#define RTC_CTRL_EVERY_MIN      (1 << 3)
 827#define RTC_CTRL_EVERY_HR       (2 << 3)
 828#define RTC_CTRL_EVERY_DAY      (3 << 3)
 829
 830#define RTC_UPDATE_EVERY        0x08
 831
 832#define RTC_HR_PM               (1 << 7)
 833
 834static void menelaus_to_time(char *regs, struct rtc_time *t)
 835{
 836        t->tm_sec = BCD2BIN(regs[0]);
 837        t->tm_min = BCD2BIN(regs[1]);
 838        if (the_menelaus->rtc_control & RTC_CTRL_MODE12) {
 839                t->tm_hour = BCD2BIN(regs[2] & 0x1f) - 1;
 840                if (regs[2] & RTC_HR_PM)
 841                        t->tm_hour += 12;
 842        } else
 843                t->tm_hour = BCD2BIN(regs[2] & 0x3f);
 844        t->tm_mday = BCD2BIN(regs[3]);
 845        t->tm_mon = BCD2BIN(regs[4]) - 1;
 846        t->tm_year = BCD2BIN(regs[5]) + 100;
 847}
 848
 849static int time_to_menelaus(struct rtc_time *t, int regnum)
 850{
 851        int     hour, status;
 852
 853        status = menelaus_write_reg(regnum++, BIN2BCD(t->tm_sec));
 854        if (status < 0)
 855                goto fail;
 856
 857        status = menelaus_write_reg(regnum++, BIN2BCD(t->tm_min));
 858        if (status < 0)
 859                goto fail;
 860
 861        if (the_menelaus->rtc_control & RTC_CTRL_MODE12) {
 862                hour = t->tm_hour + 1;
 863                if (hour > 12)
 864                        hour = RTC_HR_PM | BIN2BCD(hour - 12);
 865                else
 866                        hour = BIN2BCD(hour);
 867        } else
 868                hour = BIN2BCD(t->tm_hour);
 869        status = menelaus_write_reg(regnum++, hour);
 870        if (status < 0)
 871                goto fail;
 872
 873        status = menelaus_write_reg(regnum++, BIN2BCD(t->tm_mday));
 874        if (status < 0)
 875                goto fail;
 876
 877        status = menelaus_write_reg(regnum++, BIN2BCD(t->tm_mon + 1));
 878        if (status < 0)
 879                goto fail;
 880
 881        status = menelaus_write_reg(regnum++, BIN2BCD(t->tm_year - 100));
 882        if (status < 0)
 883                goto fail;
 884
 885        return 0;
 886fail:
 887        dev_err(&the_menelaus->client->dev, "rtc write reg %02x, err %d\n",
 888                        --regnum, status);
 889        return status;
 890}
 891
 892static int menelaus_read_time(struct device *dev, struct rtc_time *t)
 893{
 894        struct i2c_msg  msg[2];
 895        char            regs[7];
 896        int             status;
 897
 898        /* block read date and time registers */
 899        regs[0] = MENELAUS_RTC_SEC;
 900
 901        msg[0].addr = MENELAUS_I2C_ADDRESS;
 902        msg[0].flags = 0;
 903        msg[0].len = 1;
 904        msg[0].buf = regs;
 905
 906        msg[1].addr = MENELAUS_I2C_ADDRESS;
 907        msg[1].flags = I2C_M_RD;
 908        msg[1].len = sizeof(regs);
 909        msg[1].buf = regs;
 910
 911        status = i2c_transfer(the_menelaus->client->adapter, msg, 2);
 912        if (status != 2) {
 913                dev_err(dev, "%s error %d\n", "read", status);
 914                return -EIO;
 915        }
 916
 917        menelaus_to_time(regs, t);
 918        t->tm_wday = BCD2BIN(regs[6]);
 919
 920        return 0;
 921}
 922
 923static int menelaus_set_time(struct device *dev, struct rtc_time *t)
 924{
 925        int             status;
 926
 927        /* write date and time registers */
 928        status = time_to_menelaus(t, MENELAUS_RTC_SEC);
 929        if (status < 0)
 930                return status;
 931        status = menelaus_write_reg(MENELAUS_RTC_WKDAY, BIN2BCD(t->tm_wday));
 932        if (status < 0) {
 933                dev_err(&the_menelaus->client->dev, "rtc write reg %02x "
 934                                "err %d\n", MENELAUS_RTC_WKDAY, status);
 935                return status;
 936        }
 937
 938        /* now commit the write */
 939        status = menelaus_write_reg(MENELAUS_RTC_UPDATE, RTC_UPDATE_EVERY);
 940        if (status < 0)
 941                dev_err(&the_menelaus->client->dev, "rtc commit time, err %d\n",
 942                                status);
 943
 944        return 0;
 945}
 946
 947static int menelaus_read_alarm(struct device *dev, struct rtc_wkalrm *w)
 948{
 949        struct i2c_msg  msg[2];
 950        char            regs[6];
 951        int             status;
 952
 953        /* block read alarm registers */
 954        regs[0] = MENELAUS_RTC_AL_SEC;
 955
 956        msg[0].addr = MENELAUS_I2C_ADDRESS;
 957        msg[0].flags = 0;
 958        msg[0].len = 1;
 959        msg[0].buf = regs;
 960
 961        msg[1].addr = MENELAUS_I2C_ADDRESS;
 962        msg[1].flags = I2C_M_RD;
 963        msg[1].len = sizeof(regs);
 964        msg[1].buf = regs;
 965
 966        status = i2c_transfer(the_menelaus->client->adapter, msg, 2);
 967        if (status != 2) {
 968                dev_err(dev, "%s error %d\n", "alarm read", status);
 969                return -EIO;
 970        }
 971
 972        menelaus_to_time(regs, &w->time);
 973
 974        w->enabled = !!(the_menelaus->rtc_control & RTC_CTRL_AL_EN);
 975
 976        /* NOTE we *could* check if actually pending... */
 977        w->pending = 0;
 978
 979        return 0;
 980}
 981
 982static int menelaus_set_alarm(struct device *dev, struct rtc_wkalrm *w)
 983{
 984        int             status;
 985
 986        if (the_menelaus->client->irq <= 0 && w->enabled)
 987                return -ENODEV;
 988
 989        /* clear previous alarm enable */
 990        if (the_menelaus->rtc_control & RTC_CTRL_AL_EN) {
 991                the_menelaus->rtc_control &= ~RTC_CTRL_AL_EN;
 992                status = menelaus_write_reg(MENELAUS_RTC_CTRL,
 993                                the_menelaus->rtc_control);
 994                if (status < 0)
 995                        return status;
 996        }
 997
 998        /* write alarm registers */
 999        status = time_to_menelaus(&w->time, MENELAUS_RTC_AL_SEC);
1000        if (status < 0)
1001                return status;
1002
1003        /* enable alarm if requested */
1004        if (w->enabled) {
1005                the_menelaus->rtc_control |= RTC_CTRL_AL_EN;
1006                status = menelaus_write_reg(MENELAUS_RTC_CTRL,
1007                                the_menelaus->rtc_control);
1008        }
1009
1010        return status;
1011}
1012
1013#ifdef CONFIG_RTC_INTF_DEV
1014
1015static void menelaus_rtc_update_work(struct menelaus_chip *m)
1016{
1017        /* report 1/sec update */
1018        local_irq_disable();
1019        rtc_update_irq(m->rtc, 1, RTC_IRQF | RTC_UF);
1020        local_irq_enable();
1021}
1022
1023static int menelaus_ioctl(struct device *dev, unsigned cmd, unsigned long arg)
1024{
1025        int     status;
1026
1027        if (the_menelaus->client->irq <= 0)
1028                return -ENOIOCTLCMD;
1029
1030        switch (cmd) {
1031        /* alarm IRQ */
1032        case RTC_AIE_ON:
1033                if (the_menelaus->rtc_control & RTC_CTRL_AL_EN)
1034                        return 0;
1035                the_menelaus->rtc_control |= RTC_CTRL_AL_EN;
1036                break;
1037        case RTC_AIE_OFF:
1038                if (!(the_menelaus->rtc_control & RTC_CTRL_AL_EN))
1039                        return 0;
1040                the_menelaus->rtc_control &= ~RTC_CTRL_AL_EN;
1041                break;
1042        /* 1/second "update" IRQ */
1043        case RTC_UIE_ON:
1044                if (the_menelaus->uie)
1045                        return 0;
1046                status = menelaus_remove_irq_work(MENELAUS_RTCTMR_IRQ);
1047                status = menelaus_add_irq_work(MENELAUS_RTCTMR_IRQ,
1048                                menelaus_rtc_update_work);
1049                if (status == 0)
1050                        the_menelaus->uie = 1;
1051                return status;
1052        case RTC_UIE_OFF:
1053                if (!the_menelaus->uie)
1054                        return 0;
1055                status = menelaus_remove_irq_work(MENELAUS_RTCTMR_IRQ);
1056                if (status == 0)
1057                        the_menelaus->uie = 0;
1058                return status;
1059        default:
1060                return -ENOIOCTLCMD;
1061        }
1062        return menelaus_write_reg(MENELAUS_RTC_CTRL, the_menelaus->rtc_control);
1063}
1064
1065#else
1066#define menelaus_ioctl  NULL
1067#endif
1068
1069/* REVISIT no compensation register support ... */
1070
1071static const struct rtc_class_ops menelaus_rtc_ops = {
1072        .ioctl                  = menelaus_ioctl,
1073        .read_time              = menelaus_read_time,
1074        .set_time               = menelaus_set_time,
1075        .read_alarm             = menelaus_read_alarm,
1076        .set_alarm              = menelaus_set_alarm,
1077};
1078
1079static void menelaus_rtc_alarm_work(struct menelaus_chip *m)
1080{
1081        /* report alarm */
1082        local_irq_disable();
1083        rtc_update_irq(m->rtc, 1, RTC_IRQF | RTC_AF);
1084        local_irq_enable();
1085
1086        /* then disable it; alarms are oneshot */
1087        the_menelaus->rtc_control &= ~RTC_CTRL_AL_EN;
1088        menelaus_write_reg(MENELAUS_RTC_CTRL, the_menelaus->rtc_control);
1089}
1090
1091static inline void menelaus_rtc_init(struct menelaus_chip *m)
1092{
1093        int     alarm = (m->client->irq > 0);
1094
1095        /* assume 32KDETEN pin is pulled high */
1096        if (!(menelaus_read_reg(MENELAUS_OSC_CTRL) & 0x80)) {
1097                dev_dbg(&m->client->dev, "no 32k oscillator\n");
1098                return;
1099        }
1100
1101        /* support RTC alarm; it can issue wakeups */
1102        if (alarm) {
1103                if (menelaus_add_irq_work(MENELAUS_RTCALM_IRQ,
1104                                menelaus_rtc_alarm_work) < 0) {
1105                        dev_err(&m->client->dev, "can't handle RTC alarm\n");
1106                        return;
1107                }
1108                device_init_wakeup(&m->client->dev, 1);
1109        }
1110
1111        /* be sure RTC is enabled; allow 1/sec irqs; leave 12hr mode alone */
1112        m->rtc_control = menelaus_read_reg(MENELAUS_RTC_CTRL);
1113        if (!(m->rtc_control & RTC_CTRL_RTC_EN)
1114                        || (m->rtc_control & RTC_CTRL_AL_EN)
1115                        || (m->rtc_control & RTC_CTRL_EVERY_MASK)) {
1116                if (!(m->rtc_control & RTC_CTRL_RTC_EN)) {
1117                        dev_warn(&m->client->dev, "rtc clock needs setting\n");
1118                        m->rtc_control |= RTC_CTRL_RTC_EN;
1119                }
1120                m->rtc_control &= ~RTC_CTRL_EVERY_MASK;
1121                m->rtc_control &= ~RTC_CTRL_AL_EN;
1122                menelaus_write_reg(MENELAUS_RTC_CTRL, m->rtc_control);
1123        }
1124
1125        m->rtc = rtc_device_register(DRIVER_NAME,
1126                        &m->client->dev,
1127                        &menelaus_rtc_ops, THIS_MODULE);
1128        if (IS_ERR(m->rtc)) {
1129                if (alarm) {
1130                        menelaus_remove_irq_work(MENELAUS_RTCALM_IRQ);
1131                        device_init_wakeup(&m->client->dev, 0);
1132                }
1133                dev_err(&m->client->dev, "can't register RTC: %d\n",
1134                                (int) PTR_ERR(m->rtc));
1135                the_menelaus->rtc = NULL;
1136        }
1137}
1138
1139#else
1140
1141static inline void menelaus_rtc_init(struct menelaus_chip *m)
1142{
1143        /* nothing */
1144}
1145
1146#endif
1147
1148/*-----------------------------------------------------------------------*/
1149
1150static struct i2c_driver menelaus_i2c_driver;
1151
1152static int menelaus_probe(struct i2c_client *client)
1153{
1154        struct menelaus_chip    *menelaus;
1155        int                     rev = 0, val;
1156        int                     err = 0;
1157        struct menelaus_platform_data *menelaus_pdata =
1158                                        client->dev.platform_data;
1159
1160        if (the_menelaus) {
1161                dev_dbg(&client->dev, "only one %s for now\n",
1162                                DRIVER_NAME);
1163                return -ENODEV;
1164        }
1165
1166        menelaus = kzalloc(sizeof *menelaus, GFP_KERNEL);
1167        if (!menelaus)
1168                return -ENOMEM;
1169
1170        i2c_set_clientdata(client, menelaus);
1171
1172        the_menelaus = menelaus;
1173        menelaus->client = client;
1174
1175        /* If a true probe check the device */
1176        rev = menelaus_read_reg(MENELAUS_REV);
1177        if (rev < 0) {
1178                pr_err(DRIVER_NAME ": device not found");
1179                err = -ENODEV;
1180                goto fail1;
1181        }
1182
1183        /* Ack and disable all Menelaus interrupts */
1184        menelaus_write_reg(MENELAUS_INT_ACK1, 0xff);
1185        menelaus_write_reg(MENELAUS_INT_ACK2, 0xff);
1186        menelaus_write_reg(MENELAUS_INT_MASK1, 0xff);
1187        menelaus_write_reg(MENELAUS_INT_MASK2, 0xff);
1188        menelaus->mask1 = 0xff;
1189        menelaus->mask2 = 0xff;
1190
1191        /* Set output buffer strengths */
1192        menelaus_write_reg(MENELAUS_MCT_CTRL1, 0x73);
1193
1194        if (client->irq > 0) {
1195                err = request_irq(client->irq, menelaus_irq, IRQF_DISABLED,
1196                                  DRIVER_NAME, menelaus);
1197                if (err) {
1198                        dev_dbg(&client->dev,  "can't get IRQ %d, err %d\n",
1199                                        client->irq, err);
1200                        goto fail1;
1201                }
1202        }
1203
1204        mutex_init(&menelaus->lock);
1205        INIT_WORK(&menelaus->work, menelaus_work);
1206
1207        pr_info("Menelaus rev %d.%d\n", rev >> 4, rev & 0x0f);
1208
1209        val = menelaus_read_reg(MENELAUS_VCORE_CTRL1);
1210        if (val < 0)
1211                goto fail2;
1212        if (val & (1 << 7))
1213                menelaus->vcore_hw_mode = 1;
1214        else
1215                menelaus->vcore_hw_mode = 0;
1216
1217        if (menelaus_pdata != NULL && menelaus_pdata->late_init != NULL) {
1218                err = menelaus_pdata->late_init(&client->dev);
1219                if (err < 0)
1220                        goto fail2;
1221        }
1222
1223        menelaus_rtc_init(menelaus);
1224
1225        return 0;
1226fail2:
1227        free_irq(client->irq, menelaus);
1228        flush_scheduled_work();
1229fail1:
1230        kfree(menelaus);
1231        return err;
1232}
1233
1234static int __exit menelaus_remove(struct i2c_client *client)
1235{
1236        struct menelaus_chip    *menelaus = i2c_get_clientdata(client);
1237
1238        free_irq(client->irq, menelaus);
1239        kfree(menelaus);
1240        i2c_set_clientdata(client, NULL);
1241        the_menelaus = NULL;
1242        return 0;
1243}
1244
1245static struct i2c_driver menelaus_i2c_driver = {
1246        .driver = {
1247                .name           = DRIVER_NAME,
1248        },
1249        .probe          = menelaus_probe,
1250        .remove         = __exit_p(menelaus_remove),
1251};
1252
1253static int __init menelaus_init(void)
1254{
1255        int res;
1256
1257        res = i2c_add_driver(&menelaus_i2c_driver);
1258        if (res < 0) {
1259                pr_err(DRIVER_NAME ": driver registration failed\n");
1260                return res;
1261        }
1262
1263        return 0;
1264}
1265
1266static void __exit menelaus_exit(void)
1267{
1268        i2c_del_driver(&menelaus_i2c_driver);
1269
1270        /* FIXME: Shutdown menelaus parts that can be shut down */
1271}
1272
1273MODULE_AUTHOR("Texas Instruments, Inc. (and others)");
1274MODULE_DESCRIPTION("I2C interface for Menelaus.");
1275MODULE_LICENSE("GPL");
1276
1277module_init(menelaus_init);
1278module_exit(menelaus_exit);
1279