linux/drivers/scsi/mac53c94.c
<<
>>
Prefs
   1/*
   2 * SCSI low-level driver for the 53c94 SCSI bus adaptor found
   3 * on Power Macintosh computers, controlling the external SCSI chain.
   4 * We assume the 53c94 is connected to a DBDMA (descriptor-based DMA)
   5 * controller.
   6 *
   7 * Paul Mackerras, August 1996.
   8 * Copyright (C) 1996 Paul Mackerras.
   9 */
  10#include <linux/kernel.h>
  11#include <linux/delay.h>
  12#include <linux/types.h>
  13#include <linux/string.h>
  14#include <linux/slab.h>
  15#include <linux/blkdev.h>
  16#include <linux/proc_fs.h>
  17#include <linux/stat.h>
  18#include <linux/spinlock.h>
  19#include <linux/interrupt.h>
  20#include <asm/dbdma.h>
  21#include <asm/io.h>
  22#include <asm/pgtable.h>
  23#include <asm/prom.h>
  24#include <asm/system.h>
  25#include <asm/pci-bridge.h>
  26#include <asm/macio.h>
  27
  28#include <scsi/scsi.h>
  29#include <scsi/scsi_cmnd.h>
  30#include <scsi/scsi_device.h>
  31#include <scsi/scsi_host.h>
  32
  33#include "mac53c94.h"
  34
  35enum fsc_phase {
  36        idle,
  37        selecting,
  38        dataing,
  39        completing,
  40        busfreeing,
  41};
  42
  43struct fsc_state {
  44        struct  mac53c94_regs __iomem *regs;
  45        int     intr;
  46        struct  dbdma_regs __iomem *dma;
  47        int     dmaintr;
  48        int     clk_freq;
  49        struct  Scsi_Host *host;
  50        struct scsi_cmnd *request_q;
  51        struct scsi_cmnd *request_qtail;
  52        struct scsi_cmnd *current_req;          /* req we're currently working on */
  53        enum fsc_phase phase;           /* what we're currently trying to do */
  54        struct dbdma_cmd *dma_cmds;     /* space for dbdma commands, aligned */
  55        void    *dma_cmd_space;
  56        struct  pci_dev *pdev;
  57        dma_addr_t dma_addr;
  58        struct macio_dev *mdev;
  59};
  60
  61static void mac53c94_init(struct fsc_state *);
  62static void mac53c94_start(struct fsc_state *);
  63static void mac53c94_interrupt(int, void *);
  64static irqreturn_t do_mac53c94_interrupt(int, void *);
  65static void cmd_done(struct fsc_state *, int result);
  66static void set_dma_cmds(struct fsc_state *, struct scsi_cmnd *);
  67
  68
  69static int mac53c94_queue(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
  70{
  71        struct fsc_state *state;
  72
  73#if 0
  74        if (cmd->sc_data_direction == DMA_TO_DEVICE) {
  75                int i;
  76                printk(KERN_DEBUG "mac53c94_queue %p: command is", cmd);
  77                for (i = 0; i < cmd->cmd_len; ++i)
  78                        printk(" %.2x", cmd->cmnd[i]);
  79                printk("\n" KERN_DEBUG "use_sg=%d request_bufflen=%d request_buffer=%p\n",
  80                       scsi_sg_count(cmd), scsi_bufflen(cmd), scsi_sglist(cmd));
  81        }
  82#endif
  83
  84        cmd->scsi_done = done;
  85        cmd->host_scribble = NULL;
  86
  87        state = (struct fsc_state *) cmd->device->host->hostdata;
  88
  89        if (state->request_q == NULL)
  90                state->request_q = cmd;
  91        else
  92                state->request_qtail->host_scribble = (void *) cmd;
  93        state->request_qtail = cmd;
  94
  95        if (state->phase == idle)
  96                mac53c94_start(state);
  97
  98        return 0;
  99}
 100
 101static int mac53c94_host_reset(struct scsi_cmnd *cmd)
 102{
 103        struct fsc_state *state = (struct fsc_state *) cmd->device->host->hostdata;
 104        struct mac53c94_regs __iomem *regs = state->regs;
 105        struct dbdma_regs __iomem *dma = state->dma;
 106        unsigned long flags;
 107
 108        spin_lock_irqsave(cmd->device->host->host_lock, flags);
 109
 110        writel((RUN|PAUSE|FLUSH|WAKE) << 16, &dma->control);
 111        writeb(CMD_SCSI_RESET, &regs->command); /* assert RST */
 112        udelay(100);                    /* leave it on for a while (>= 25us) */
 113        writeb(CMD_RESET, &regs->command);
 114        udelay(20);
 115        mac53c94_init(state);
 116        writeb(CMD_NOP, &regs->command);
 117
 118        spin_unlock_irqrestore(cmd->device->host->host_lock, flags);
 119        return SUCCESS;
 120}
 121
 122static void mac53c94_init(struct fsc_state *state)
 123{
 124        struct mac53c94_regs __iomem *regs = state->regs;
 125        struct dbdma_regs __iomem *dma = state->dma;
 126        int x;
 127
 128        writeb(state->host->this_id | CF1_PAR_ENABLE, &regs->config1);
 129        writeb(TIMO_VAL(250), &regs->sel_timeout);      /* 250ms */
 130        writeb(CLKF_VAL(state->clk_freq), &regs->clk_factor);
 131        writeb(CF2_FEATURE_EN, &regs->config2);
 132        writeb(0, &regs->config3);
 133        writeb(0, &regs->sync_period);
 134        writeb(0, &regs->sync_offset);
 135        x = readb(&regs->interrupt);
 136        writel((RUN|PAUSE|FLUSH|WAKE) << 16, &dma->control);
 137}
 138
 139/*
 140 * Start the next command for a 53C94.
 141 * Should be called with interrupts disabled.
 142 */
 143static void mac53c94_start(struct fsc_state *state)
 144{
 145        struct scsi_cmnd *cmd;
 146        struct mac53c94_regs __iomem *regs = state->regs;
 147        int i;
 148
 149        if (state->phase != idle || state->current_req != NULL)
 150                panic("inappropriate mac53c94_start (state=%p)", state);
 151        if (state->request_q == NULL)
 152                return;
 153        state->current_req = cmd = state->request_q;
 154        state->request_q = (struct scsi_cmnd *) cmd->host_scribble;
 155
 156        /* Off we go */
 157        writeb(0, &regs->count_lo);
 158        writeb(0, &regs->count_mid);
 159        writeb(0, &regs->count_hi);
 160        writeb(CMD_NOP + CMD_DMA_MODE, &regs->command);
 161        udelay(1);
 162        writeb(CMD_FLUSH, &regs->command);
 163        udelay(1);
 164        writeb(cmd->device->id, &regs->dest_id);
 165        writeb(0, &regs->sync_period);
 166        writeb(0, &regs->sync_offset);
 167
 168        /* load the command into the FIFO */
 169        for (i = 0; i < cmd->cmd_len; ++i)
 170                writeb(cmd->cmnd[i], &regs->fifo);
 171
 172        /* do select without ATN XXX */
 173        writeb(CMD_SELECT, &regs->command);
 174        state->phase = selecting;
 175
 176        set_dma_cmds(state, cmd);
 177}
 178
 179static irqreturn_t do_mac53c94_interrupt(int irq, void *dev_id)
 180{
 181        unsigned long flags;
 182        struct Scsi_Host *dev = ((struct fsc_state *) dev_id)->current_req->device->host;
 183        
 184        spin_lock_irqsave(dev->host_lock, flags);
 185        mac53c94_interrupt(irq, dev_id);
 186        spin_unlock_irqrestore(dev->host_lock, flags);
 187        return IRQ_HANDLED;
 188}
 189
 190static void mac53c94_interrupt(int irq, void *dev_id)
 191{
 192        struct fsc_state *state = (struct fsc_state *) dev_id;
 193        struct mac53c94_regs __iomem *regs = state->regs;
 194        struct dbdma_regs __iomem *dma = state->dma;
 195        struct scsi_cmnd *cmd = state->current_req;
 196        int nb, stat, seq, intr;
 197        static int mac53c94_errors;
 198
 199        /*
 200         * Apparently, reading the interrupt register unlatches
 201         * the status and sequence step registers.
 202         */
 203        seq = readb(&regs->seqstep);
 204        stat = readb(&regs->status);
 205        intr = readb(&regs->interrupt);
 206
 207#if 0
 208        printk(KERN_DEBUG "mac53c94_intr, intr=%x stat=%x seq=%x phase=%d\n",
 209               intr, stat, seq, state->phase);
 210#endif
 211
 212        if (intr & INTR_RESET) {
 213                /* SCSI bus was reset */
 214                printk(KERN_INFO "external SCSI bus reset detected\n");
 215                writeb(CMD_NOP, &regs->command);
 216                writel(RUN << 16, &dma->control);       /* stop dma */
 217                cmd_done(state, DID_RESET << 16);
 218                return;
 219        }
 220        if (intr & INTR_ILL_CMD) {
 221                printk(KERN_ERR "53c94: invalid cmd, intr=%x stat=%x seq=%x phase=%d\n",
 222                       intr, stat, seq, state->phase);
 223                cmd_done(state, DID_ERROR << 16);
 224                return;
 225        }
 226        if (stat & STAT_ERROR) {
 227#if 0
 228                /* XXX these seem to be harmless? */
 229                printk("53c94: bad error, intr=%x stat=%x seq=%x phase=%d\n",
 230                       intr, stat, seq, state->phase);
 231#endif
 232                ++mac53c94_errors;
 233                writeb(CMD_NOP + CMD_DMA_MODE, &regs->command);
 234        }
 235        if (cmd == 0) {
 236                printk(KERN_DEBUG "53c94: interrupt with no command active?\n");
 237                return;
 238        }
 239        if (stat & STAT_PARITY) {
 240                printk(KERN_ERR "mac53c94: parity error\n");
 241                cmd_done(state, DID_PARITY << 16);
 242                return;
 243        }
 244        switch (state->phase) {
 245        case selecting:
 246                if (intr & INTR_DISCONNECT) {
 247                        /* selection timed out */
 248                        cmd_done(state, DID_BAD_TARGET << 16);
 249                        return;
 250                }
 251                if (intr != INTR_BUS_SERV + INTR_DONE) {
 252                        printk(KERN_DEBUG "got intr %x during selection\n", intr);
 253                        cmd_done(state, DID_ERROR << 16);
 254                        return;
 255                }
 256                if ((seq & SS_MASK) != SS_DONE) {
 257                        printk(KERN_DEBUG "seq step %x after command\n", seq);
 258                        cmd_done(state, DID_ERROR << 16);
 259                        return;
 260                }
 261                writeb(CMD_NOP, &regs->command);
 262                /* set DMA controller going if any data to transfer */
 263                if ((stat & (STAT_MSG|STAT_CD)) == 0
 264                    && (scsi_sg_count(cmd) > 0 || scsi_bufflen(cmd))) {
 265                        nb = cmd->SCp.this_residual;
 266                        if (nb > 0xfff0)
 267                                nb = 0xfff0;
 268                        cmd->SCp.this_residual -= nb;
 269                        writeb(nb, &regs->count_lo);
 270                        writeb(nb >> 8, &regs->count_mid);
 271                        writeb(CMD_DMA_MODE + CMD_NOP, &regs->command);
 272                        writel(virt_to_phys(state->dma_cmds), &dma->cmdptr);
 273                        writel((RUN << 16) | RUN, &dma->control);
 274                        writeb(CMD_DMA_MODE + CMD_XFER_DATA, &regs->command);
 275                        state->phase = dataing;
 276                        break;
 277                } else if ((stat & STAT_PHASE) == STAT_CD + STAT_IO) {
 278                        /* up to status phase already */
 279                        writeb(CMD_I_COMPLETE, &regs->command);
 280                        state->phase = completing;
 281                } else {
 282                        printk(KERN_DEBUG "in unexpected phase %x after cmd\n",
 283                               stat & STAT_PHASE);
 284                        cmd_done(state, DID_ERROR << 16);
 285                        return;
 286                }
 287                break;
 288
 289        case dataing:
 290                if (intr != INTR_BUS_SERV) {
 291                        printk(KERN_DEBUG "got intr %x before status\n", intr);
 292                        cmd_done(state, DID_ERROR << 16);
 293                        return;
 294                }
 295                if (cmd->SCp.this_residual != 0
 296                    && (stat & (STAT_MSG|STAT_CD)) == 0) {
 297                        /* Set up the count regs to transfer more */
 298                        nb = cmd->SCp.this_residual;
 299                        if (nb > 0xfff0)
 300                                nb = 0xfff0;
 301                        cmd->SCp.this_residual -= nb;
 302                        writeb(nb, &regs->count_lo);
 303                        writeb(nb >> 8, &regs->count_mid);
 304                        writeb(CMD_DMA_MODE + CMD_NOP, &regs->command);
 305                        writeb(CMD_DMA_MODE + CMD_XFER_DATA, &regs->command);
 306                        break;
 307                }
 308                if ((stat & STAT_PHASE) != STAT_CD + STAT_IO) {
 309                        printk(KERN_DEBUG "intr %x before data xfer complete\n", intr);
 310                }
 311                writel(RUN << 16, &dma->control);       /* stop dma */
 312                scsi_dma_unmap(cmd);
 313                /* should check dma status */
 314                writeb(CMD_I_COMPLETE, &regs->command);
 315                state->phase = completing;
 316                break;
 317        case completing:
 318                if (intr != INTR_DONE) {
 319                        printk(KERN_DEBUG "got intr %x on completion\n", intr);
 320                        cmd_done(state, DID_ERROR << 16);
 321                        return;
 322                }
 323                cmd->SCp.Status = readb(&regs->fifo);
 324                cmd->SCp.Message = readb(&regs->fifo);
 325                cmd->result = CMD_ACCEPT_MSG;
 326                writeb(CMD_ACCEPT_MSG, &regs->command);
 327                state->phase = busfreeing;
 328                break;
 329        case busfreeing:
 330                if (intr != INTR_DISCONNECT) {
 331                        printk(KERN_DEBUG "got intr %x when expected disconnect\n", intr);
 332                }
 333                cmd_done(state, (DID_OK << 16) + (cmd->SCp.Message << 8)
 334                         + cmd->SCp.Status);
 335                break;
 336        default:
 337                printk(KERN_DEBUG "don't know about phase %d\n", state->phase);
 338        }
 339}
 340
 341static void cmd_done(struct fsc_state *state, int result)
 342{
 343        struct scsi_cmnd *cmd;
 344
 345        cmd = state->current_req;
 346        if (cmd != 0) {
 347                cmd->result = result;
 348                (*cmd->scsi_done)(cmd);
 349                state->current_req = NULL;
 350        }
 351        state->phase = idle;
 352        mac53c94_start(state);
 353}
 354
 355/*
 356 * Set up DMA commands for transferring data.
 357 */
 358static void set_dma_cmds(struct fsc_state *state, struct scsi_cmnd *cmd)
 359{
 360        int i, dma_cmd, total, nseg;
 361        struct scatterlist *scl;
 362        struct dbdma_cmd *dcmds;
 363        dma_addr_t dma_addr;
 364        u32 dma_len;
 365
 366        nseg = scsi_dma_map(cmd);
 367        BUG_ON(nseg < 0);
 368        if (!nseg)
 369                return;
 370
 371        dma_cmd = cmd->sc_data_direction == DMA_TO_DEVICE ?
 372                        OUTPUT_MORE : INPUT_MORE;
 373        dcmds = state->dma_cmds;
 374        total = 0;
 375
 376        scsi_for_each_sg(cmd, scl, nseg, i) {
 377                dma_addr = sg_dma_address(scl);
 378                dma_len = sg_dma_len(scl);
 379                if (dma_len > 0xffff)
 380                        panic("mac53c94: scatterlist element >= 64k");
 381                total += dma_len;
 382                st_le16(&dcmds->req_count, dma_len);
 383                st_le16(&dcmds->command, dma_cmd);
 384                st_le32(&dcmds->phy_addr, dma_addr);
 385                dcmds->xfer_status = 0;
 386                ++dcmds;
 387        }
 388
 389        dma_cmd += OUTPUT_LAST - OUTPUT_MORE;
 390        st_le16(&dcmds[-1].command, dma_cmd);
 391        st_le16(&dcmds->command, DBDMA_STOP);
 392        cmd->SCp.this_residual = total;
 393}
 394
 395static struct scsi_host_template mac53c94_template = {
 396        .proc_name      = "53c94",
 397        .name           = "53C94",
 398        .queuecommand   = mac53c94_queue,
 399        .eh_host_reset_handler = mac53c94_host_reset,
 400        .can_queue      = 1,
 401        .this_id        = 7,
 402        .sg_tablesize   = SG_ALL,
 403        .cmd_per_lun    = 1,
 404        .use_clustering = DISABLE_CLUSTERING,
 405        .use_sg_chaining = ENABLE_SG_CHAINING,
 406};
 407
 408static int mac53c94_probe(struct macio_dev *mdev, const struct of_device_id *match)
 409{
 410        struct device_node *node = macio_get_of_node(mdev);
 411        struct pci_dev *pdev = macio_get_pci_dev(mdev);
 412        struct fsc_state *state;
 413        struct Scsi_Host *host;
 414        void *dma_cmd_space;
 415        const unsigned char *clkprop;
 416        int proplen, rc = -ENODEV;
 417
 418        if (macio_resource_count(mdev) != 2 || macio_irq_count(mdev) != 2) {
 419                printk(KERN_ERR "mac53c94: expected 2 addrs and intrs"
 420                       " (got %d/%d)\n",
 421                       macio_resource_count(mdev), macio_irq_count(mdev));
 422                return -ENODEV;
 423        }
 424
 425        if (macio_request_resources(mdev, "mac53c94") != 0) {
 426                printk(KERN_ERR "mac53c94: unable to request memory resources");
 427                return -EBUSY;
 428        }
 429
 430        host = scsi_host_alloc(&mac53c94_template, sizeof(struct fsc_state));
 431        if (host == NULL) {
 432                printk(KERN_ERR "mac53c94: couldn't register host");
 433                rc = -ENOMEM;
 434                goto out_release;
 435        }
 436
 437        state = (struct fsc_state *) host->hostdata;
 438        macio_set_drvdata(mdev, state);
 439        state->host = host;
 440        state->pdev = pdev;
 441        state->mdev = mdev;
 442
 443        state->regs = (struct mac53c94_regs __iomem *)
 444                ioremap(macio_resource_start(mdev, 0), 0x1000);
 445        state->intr = macio_irq(mdev, 0);
 446        state->dma = (struct dbdma_regs __iomem *)
 447                ioremap(macio_resource_start(mdev, 1), 0x1000);
 448        state->dmaintr = macio_irq(mdev, 1);
 449        if (state->regs == NULL || state->dma == NULL) {
 450                printk(KERN_ERR "mac53c94: ioremap failed for %s\n",
 451                       node->full_name);
 452                goto out_free;
 453        }
 454
 455        clkprop = of_get_property(node, "clock-frequency", &proplen);
 456        if (clkprop == NULL || proplen != sizeof(int)) {
 457                printk(KERN_ERR "%s: can't get clock frequency, "
 458                       "assuming 25MHz\n", node->full_name);
 459                state->clk_freq = 25000000;
 460        } else
 461                state->clk_freq = *(int *)clkprop;
 462
 463        /* Space for dma command list: +1 for stop command,
 464         * +1 to allow for aligning.
 465         * XXX FIXME: Use DMA consistent routines
 466         */
 467        dma_cmd_space = kmalloc((host->sg_tablesize + 2) *
 468                                sizeof(struct dbdma_cmd), GFP_KERNEL);
 469        if (dma_cmd_space == 0) {
 470                printk(KERN_ERR "mac53c94: couldn't allocate dma "
 471                       "command space for %s\n", node->full_name);
 472                rc = -ENOMEM;
 473                goto out_free;
 474        }
 475        state->dma_cmds = (struct dbdma_cmd *)DBDMA_ALIGN(dma_cmd_space);
 476        memset(state->dma_cmds, 0, (host->sg_tablesize + 1)
 477               * sizeof(struct dbdma_cmd));
 478        state->dma_cmd_space = dma_cmd_space;
 479
 480        mac53c94_init(state);
 481
 482        if (request_irq(state->intr, do_mac53c94_interrupt, 0, "53C94",state)) {
 483                printk(KERN_ERR "mac53C94: can't get irq %d for %s\n",
 484                       state->intr, node->full_name);
 485                goto out_free_dma;
 486        }
 487
 488        rc = scsi_add_host(host, &mdev->ofdev.dev);
 489        if (rc != 0)
 490                goto out_release_irq;
 491
 492        scsi_scan_host(host);
 493        return 0;
 494
 495 out_release_irq:
 496        free_irq(state->intr, state);
 497 out_free_dma:
 498        kfree(state->dma_cmd_space);
 499 out_free:
 500        if (state->dma != NULL)
 501                iounmap(state->dma);
 502        if (state->regs != NULL)
 503                iounmap(state->regs);
 504        scsi_host_put(host);
 505 out_release:
 506        macio_release_resources(mdev);
 507
 508        return rc;
 509}
 510
 511static int mac53c94_remove(struct macio_dev *mdev)
 512{
 513        struct fsc_state *fp = (struct fsc_state *)macio_get_drvdata(mdev);
 514        struct Scsi_Host *host = fp->host;
 515
 516        scsi_remove_host(host);
 517
 518        free_irq(fp->intr, fp);
 519
 520        if (fp->regs)
 521                iounmap(fp->regs);
 522        if (fp->dma)
 523                iounmap(fp->dma);
 524        kfree(fp->dma_cmd_space);
 525
 526        scsi_host_put(host);
 527
 528        macio_release_resources(mdev);
 529
 530        return 0;
 531}
 532
 533
 534static struct of_device_id mac53c94_match[] = 
 535{
 536        {
 537        .name           = "53c94",
 538        },
 539        {},
 540};
 541MODULE_DEVICE_TABLE (of, mac53c94_match);
 542
 543static struct macio_driver mac53c94_driver = 
 544{
 545        .name           = "mac53c94",
 546        .match_table    = mac53c94_match,
 547        .probe          = mac53c94_probe,
 548        .remove         = mac53c94_remove,
 549};
 550
 551
 552static int __init init_mac53c94(void)
 553{
 554        return macio_register_driver(&mac53c94_driver);
 555}
 556
 557static void __exit exit_mac53c94(void)
 558{
 559        return macio_unregister_driver(&mac53c94_driver);
 560}
 561
 562module_init(init_mac53c94);
 563module_exit(exit_mac53c94);
 564
 565MODULE_DESCRIPTION("PowerMac 53c94 SCSI driver");
 566MODULE_AUTHOR("Paul Mackerras <paulus@samba.org>");
 567MODULE_LICENSE("GPL");
 568