LXR linux/drivers/serial/8250

   1/*
   2 *      Serial Device Initialisation for Lasi/Asp/Wax/Dino
   3 *
   4 *      (c) Copyright Matthew Wilcox <willy@debian.org> 2001-2002
   5 *
   6 *      This program is free software; you can redistribute it and/or modify
   7 *      it under the terms of the GNU General Public License as published by
   8 *      the Free Software Foundation; either version 2 of the License, or
   9 *      (at your option) any later version.
  10 */
  11
  12#include <linux/errno.h>
  13#include <linux/init.h>
  14#include <linux/interrupt.h>
  15#include <linux/ioport.h>
  16#include <linux/module.h>
  17#include <linux/serial_core.h>
  18#include <linux/signal.h>
  19#include <linux/slab.h>
  20#include <linux/types.h>
  21
  22#include <asm/hardware.h>
  23#include <asm/parisc-device.h>
  24#include <asm/io.h>
  25
  26#include "8250.h"
  27
  28static int __init 
  29serial_init_chip(struct parisc_device *dev)
  30{
  31        struct uart_port port;
  32        unsigned long address;
  33        int err;
  34
  35        if (!dev->irq) {
  36                /* We find some unattached serial ports by walking native
  37                 * busses.  These should be silently ignored.  Otherwise,
  38                 * what we have here is a missing parent device, so tell
  39                 * the user what they're missing.
  40                 */
  41                if (parisc_parent(dev)->id.hw_type != HPHW_IOA) {
  42                        printk(KERN_INFO "Serial: device 0x%lx not configured.\n"
  43                                "Enable support for Wax, Lasi, Asp or Dino.\n",
  44                                dev->hpa.start);
  45                }
  46                return -ENODEV;
  47        }
  48
  49        address = dev->hpa.start;
  50        if (dev->id.sversion != 0x8d) {
  51                address += 0x800;
  52        }
  53
  54        memset(&port, 0, sizeof(port));
  55        port.iotype     = UPIO_MEM;
  56        /* 7.272727MHz on Lasi.  Assumed the same for Dino, Wax and Timi. */
  57        port.uartclk    = 7272727;
  58        port.mapbase    = address;
  59        port.membase    = ioremap_nocache(address, 16);
  60        port.irq        = dev->irq;
  61        port.flags      = UPF_BOOT_AUTOCONF;
  62        port.dev        = &dev->dev;
  63
  64        err = serial8250_register_port(&port);
  65        if (err < 0) {
  66                printk(KERN_WARNING "serial8250_register_port returned error %d\n", err);
  67                iounmap(port.membase);
  68                return err;
  69        }
  70        
  71        return 0;
  72}
  73
  74static struct parisc_device_id serial_tbl[] = {
  75        { HPHW_FIO, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x00075 },
  76        { HPHW_FIO, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x0008c },
  77        { HPHW_FIO, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x0008d },
  78        { 0 }
  79};
  80
  81/* Hack.  Some machines have SERIAL_0 attached to Lasi and SERIAL_1
  82 * attached to Dino.  Unfortunately, Dino appears before Lasi in the device
  83 * tree.  To ensure that ttyS0 == SERIAL_0, we register two drivers; one
  84 * which only knows about Lasi and then a second which will find all the
  85 * other serial ports.  HPUX ignores this problem.
  86 */
  87static struct parisc_device_id lasi_tbl[] = {
  88        { HPHW_FIO, HVERSION_REV_ANY_ID, 0x03B, 0x0008C }, /* C1xx/C1xxL */
  89        { HPHW_FIO, HVERSION_REV_ANY_ID, 0x03C, 0x0008C }, /* B132L */
  90        { HPHW_FIO, HVERSION_REV_ANY_ID, 0x03D, 0x0008C }, /* B160L */
  91        { HPHW_FIO, HVERSION_REV_ANY_ID, 0x03E, 0x0008C }, /* B132L+ */
  92        { HPHW_FIO, HVERSION_REV_ANY_ID, 0x03F, 0x0008C }, /* B180L+ */
  93        { HPHW_FIO, HVERSION_REV_ANY_ID, 0x046, 0x0008C }, /* Rocky2 120 */
  94        { HPHW_FIO, HVERSION_REV_ANY_ID, 0x047, 0x0008C }, /* Rocky2 150 */
  95        { HPHW_FIO, HVERSION_REV_ANY_ID, 0x04E, 0x0008C }, /* Kiji L2 132 */
  96        { HPHW_FIO, HVERSION_REV_ANY_ID, 0x056, 0x0008C }, /* Raven+ */
  97        { 0 }
  98};
  99
 100
 101MODULE_DEVICE_TABLE(parisc, serial_tbl);
 102
 103static struct parisc_driver lasi_driver = {
 104        .name           = "serial_1",
 105        .id_table       = lasi_tbl,
 106        .probe          = serial_init_chip,
 107};
 108
 109static struct parisc_driver serial_driver = {
 110        .name           = "serial",
 111        .id_table       = serial_tbl,
 112        .probe          = serial_init_chip,
 113};
 114
 115int __init probe_serial_gsc(void)
 116{
 117        register_parisc_driver(&lasi_driver);
 118        register_parisc_driver(&serial_driver);
 119        return 0;
 120}
 121
 122module_init(probe_serial_gsc);
 123