1/***************************************************************************** 2 * 3 * Copyright (C) 1997-2002 Inside Out Networks, Inc. 4 * 5 * This program is free software; you can redistribute it and/or modify 6 * it under the terms of the GNU General Public License as published by 7 * the Free Software Foundation; either version 2 of the License, or 8 * (at your option) any later version. 9 * 10 * 11 * Feb-16-2001 DMI Added I2C structure definitions 12 * May-29-2002 gkh Ported to Linux 13 * 14 * 15 ******************************************************************************/ 16 17#ifndef _IO_TI_H_ 18#define _IO_TI_H_ 19 20/* Address Space */ 21#define DTK_ADDR_SPACE_XDATA 0x03 /* Addr is placed in XDATA space */ 22#define DTK_ADDR_SPACE_I2C_TYPE_II 0x82 /* Addr is placed in I2C area */ 23#define DTK_ADDR_SPACE_I2C_TYPE_III 0x83 /* Addr is placed in I2C area */ 24 25// UART Defines 26#define UMPMEM_BASE_UART1 0xFFA0 /* UMP UART1 base address */ 27#define UMPMEM_BASE_UART2 0xFFB0 /* UMP UART2 base address */ 28#define UMPMEM_OFFS_UART_LSR 0x05 /* UMP UART LSR register offset */ 29 30/* Bits per character */ 31#define UMP_UART_CHAR5BITS 0x00 32#define UMP_UART_CHAR6BITS 0x01 33#define UMP_UART_CHAR7BITS 0x02 34#define UMP_UART_CHAR8BITS 0x03 35 36/* Parity */ 37#define UMP_UART_NOPARITY 0x00 38#define UMP_UART_ODDPARITY 0x01 39#define UMP_UART_EVENPARITY 0x02 40#define UMP_UART_MARKPARITY 0x03 41#define UMP_UART_SPACEPARITY 0x04 42 43/* Stop bits */ 44#define UMP_UART_STOPBIT1 0x00 45#define UMP_UART_STOPBIT15 0x01 46#define UMP_UART_STOPBIT2 0x02 47 48/* Line status register masks */ 49#define UMP_UART_LSR_OV_MASK 0x01 50#define UMP_UART_LSR_PE_MASK 0x02 51#define UMP_UART_LSR_FE_MASK 0x04 52#define UMP_UART_LSR_BR_MASK 0x08 53#define UMP_UART_LSR_ER_MASK 0x0F 54#define UMP_UART_LSR_RX_MASK 0x10 55#define UMP_UART_LSR_TX_MASK 0x20 56 57#define UMP_UART_LSR_DATA_MASK ( LSR_PAR_ERR | LSR_FRM_ERR | LSR_BREAK ) 58 59/* Port Settings Constants) */ 60#define UMP_MASK_UART_FLAGS_RTS_FLOW 0x0001 61#define UMP_MASK_UART_FLAGS_RTS_DISABLE 0x0002 62#define UMP_MASK_UART_FLAGS_PARITY 0x0008 63#define UMP_MASK_UART_FLAGS_OUT_X_DSR_FLOW 0x0010 64#define UMP_MASK_UART_FLAGS_OUT_X_CTS_FLOW 0x0020 65#define UMP_MASK_UART_FLAGS_OUT_X 0x0040 66#define UMP_MASK_UART_FLAGS_OUT_XA 0x0080 67#define UMP_MASK_UART_FLAGS_IN_X 0x0100 68#define UMP_MASK_UART_FLAGS_DTR_FLOW 0x0800 69#define UMP_MASK_UART_FLAGS_DTR_DISABLE 0x1000 70#define UMP_MASK_UART_FLAGS_RECEIVE_MS_INT 0x2000 71#define UMP_MASK_UART_FLAGS_AUTO_START_ON_ERR 0x4000 72 73#define UMP_DMA_MODE_CONTINOUS 0x01 74#define UMP_PIPE_TRANS_TIMEOUT_ENA 0x80 75#define UMP_PIPE_TRANSFER_MODE_MASK 0x03 76#define UMP_PIPE_TRANS_TIMEOUT_MASK 0x7C 77 78/* Purge port Direction Mask Bits */ 79#define UMP_PORT_DIR_OUT 0x01 80#define UMP_PORT_DIR_IN 0x02 81 82// Address of Port 0 83#define UMPM_UART1_PORT 0x03 84 85// Commands 86#define UMPC_SET_CONFIG 0x05 87#define UMPC_OPEN_PORT 0x06 88#define UMPC_CLOSE_PORT 0x07 89#define UMPC_START_PORT 0x08 90#define UMPC_STOP_PORT 0x09 91#define UMPC_TEST_PORT 0x0A 92#define UMPC_PURGE_PORT 0x0B 93 94#define UMPC_COMPLETE_READ 0x80 // Force the Firmware to complete the current Read 95#define UMPC_HARDWARE_RESET 0x81 // Force UMP back into BOOT Mode 96#define UMPC_COPY_DNLD_TO_I2C 0x82 // Copy current download image to type 0xf2 record in 16k I2C 97 // firmware will change 0xff record to type 2 record when complete 98 99 // Special function register commands 100 // wIndex is register address 101 // wValue is MSB/LSB mask/data 102#define UMPC_WRITE_SFR 0x83 // Write SFR Register 103 104 // wIndex is register address 105#define UMPC_READ_SFR 0x84 // Read SRF Register 106 107 // Set or Clear DTR (wValue bit 0 Set/Clear) wIndex ModuleID (port) 108#define UMPC_SET_CLR_DTR 0x85 109 110 // Set or Clear RTS (wValue bit 0 Set/Clear) wIndex ModuleID (port) 111#define UMPC_SET_CLR_RTS 0x86 112 113 // Set or Clear LOOPBACK (wValue bit 0 Set/Clear) wIndex ModuleID (port) 114#define UMPC_SET_CLR_LOOPBACK 0x87 115 116 // Set or Clear BREAK (wValue bit 0 Set/Clear) wIndex ModuleID (port) 117#define UMPC_SET_CLR_BREAK 0x88 118 119 // Read MSR wIndex ModuleID (port) 120#define UMPC_READ_MSR 0x89 121 122 /* Toolkit commands */ 123 /* Read-write group */ 124#define UMPC_MEMORY_READ 0x92 125#define UMPC_MEMORY_WRITE 0x93 126 127/* 128 * UMP DMA Definitions 129 */ 130#define UMPD_OEDB1_ADDRESS 0xFF08 131#define UMPD_OEDB2_ADDRESS 0xFF10 132 133struct out_endpoint_desc_block 134{ 135 __u8 Configuration; 136 __u8 XBufAddr; 137 __u8 XByteCount; 138 __u8 Unused1; 139 __u8 Unused2; 140 __u8 YBufAddr; 141 __u8 YByteCount; 142 __u8 BufferSize; 143} __attribute__((packed)); 144 145 146/* 147 * TYPE DEFINITIONS 148 * Structures for Firmware commands 149 */ 150struct ump_uart_config /* UART settings */ 151{ 152 __u16 wBaudRate; /* Baud rate */ 153 __u16 wFlags; /* Bitmap mask of flags */ 154 __u8 bDataBits; /* 5..8 - data bits per character */ 155 __u8 bParity; /* Parity settings */ 156 __u8 bStopBits; /* Stop bits settings */ 157 char cXon; /* XON character */ 158 char cXoff; /* XOFF character */ 159 __u8 bUartMode; /* Will be updated when a user */ 160 /* interface is defined */ 161} __attribute__((packed)); 162 163 164/* 165 * TYPE DEFINITIONS 166 * Structures for USB interrupts 167 */ 168struct ump_interrupt /* Interrupt packet structure */ 169{ 170 __u8 bICode; /* Interrupt code (interrupt num) */ 171 __u8 bIInfo; /* Interrupt information */ 172} __attribute__((packed)); 173 174 175#define TIUMP_GET_PORT_FROM_CODE(c) (((c) >> 4) - 3) 176#define TIUMP_GET_FUNC_FROM_CODE(c) ((c) & 0x0f) 177#define TIUMP_INTERRUPT_CODE_LSR 0x03 178#define TIUMP_INTERRUPT_CODE_MSR 0x04 179 180#endif 181