1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21#include <linux/kernel.h>
22#include <linux/init.h>
23#include <linux/mm.h>
24#include <linux/sched.h>
25#include <linux/interrupt.h>
26#include <linux/bitops.h>
27#include <linux/pci.h>
28#include <linux/ioport.h>
29#include <linux/slab.h>
30#include <linux/delay.h>
31#include <linux/serial.h>
32#include <linux/tty.h>
33#include <linux/serial_core.h>
34#include <linux/platform_device.h>
35#include <linux/io.h>
36
37#include <asm/irq.h>
38#include <asm/pgtable.h>
39#include <asm/page.h>
40#include <asm/system.h>
41#include <mach/hardware.h>
42#include <asm/mach-types.h>
43
44#include <asm/mach/pci.h>
45#include <asm/mach/map.h>
46#include <asm/mach/irq.h>
47#include <asm/mach/time.h>
48#include <asm/mach/arch.h>
49#include <asm/mach/flash.h>
50
51
52
53
54static void __init enp2611_timer_init(void)
55{
56 ixp2000_init_time(50 * 1000 * 1000);
57}
58
59static struct sys_timer enp2611_timer = {
60 .init = enp2611_timer_init,
61 .offset = ixp2000_gettimeoffset,
62};
63
64
65
66
67
68static struct map_desc enp2611_io_desc[] __initdata = {
69 {
70 .virtual = ENP2611_CALEB_VIRT_BASE,
71 .pfn = __phys_to_pfn(ENP2611_CALEB_PHYS_BASE),
72 .length = ENP2611_CALEB_SIZE,
73 .type = MT_DEVICE,
74 }, {
75 .virtual = ENP2611_PM3386_0_VIRT_BASE,
76 .pfn = __phys_to_pfn(ENP2611_PM3386_0_PHYS_BASE),
77 .length = ENP2611_PM3386_0_SIZE,
78 .type = MT_DEVICE,
79 }, {
80 .virtual = ENP2611_PM3386_1_VIRT_BASE,
81 .pfn = __phys_to_pfn(ENP2611_PM3386_1_PHYS_BASE),
82 .length = ENP2611_PM3386_1_SIZE,
83 .type = MT_DEVICE,
84 }
85};
86
87void __init enp2611_map_io(void)
88{
89 ixp2000_map_io();
90 iotable_init(enp2611_io_desc, ARRAY_SIZE(enp2611_io_desc));
91}
92
93
94
95
96
97static int enp2611_pci_setup(int nr, struct pci_sys_data *sys)
98{
99 sys->mem_offset = 0xe0000000;
100 ixp2000_pci_setup(nr, sys);
101 return 1;
102}
103
104static void __init enp2611_pci_preinit(void)
105{
106 ixp2000_reg_write(IXP2000_PCI_ADDR_EXT, 0x00100000);
107 ixp2000_pci_preinit();
108 pcibios_setup("firmware");
109}
110
111static inline int enp2611_pci_valid_device(struct pci_bus *bus,
112 unsigned int devfn)
113{
114
115
116
117 if (bus->number == 0x01 && devfn == 0x10)
118 return 0;
119
120 return 1;
121}
122
123static int enp2611_pci_read_config(struct pci_bus *bus, unsigned int devfn,
124 int where, int size, u32 *value)
125{
126 if (enp2611_pci_valid_device(bus, devfn))
127 return ixp2000_pci_read_config(bus, devfn, where, size, value);
128
129 return PCIBIOS_DEVICE_NOT_FOUND;
130}
131
132static int enp2611_pci_write_config(struct pci_bus *bus, unsigned int devfn,
133 int where, int size, u32 value)
134{
135 if (enp2611_pci_valid_device(bus, devfn))
136 return ixp2000_pci_write_config(bus, devfn, where, size, value);
137
138 return PCIBIOS_DEVICE_NOT_FOUND;
139}
140
141static struct pci_ops enp2611_pci_ops = {
142 .read = enp2611_pci_read_config,
143 .write = enp2611_pci_write_config
144};
145
146static struct pci_bus * __init enp2611_pci_scan_bus(int nr,
147 struct pci_sys_data *sys)
148{
149 return pci_scan_bus(sys->busnr, &enp2611_pci_ops, sys);
150}
151
152static int __init enp2611_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
153{
154 int irq;
155
156 if (dev->bus->number == 0 && PCI_SLOT(dev->devfn) == 0) {
157
158 irq = IRQ_IXP2000_PCIA;
159 } else if (dev->bus->number == 0 && PCI_SLOT(dev->devfn) == 1) {
160
161 irq = IRQ_IXP2000_PCIB;
162 } else if (dev->bus->number == 0 && PCI_SLOT(dev->devfn) == 4) {
163
164 irq = -1;
165 } else if (dev->bus->number == 1 && PCI_SLOT(dev->devfn) == 0) {
166
167 irq = IRQ_IXP2000_PCIA;
168 } else if (dev->bus->number == 1 && PCI_SLOT(dev->devfn) == 1) {
169
170 irq = IRQ_IXP2000_PCIB;
171 } else {
172 printk(KERN_ERR "enp2611_pci_map_irq() called for unknown "
173 "device PCI:%d:%d:%d\n", dev->bus->number,
174 PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
175 irq = -1;
176 }
177
178 return irq;
179}
180
181struct hw_pci enp2611_pci __initdata = {
182 .nr_controllers = 1,
183 .setup = enp2611_pci_setup,
184 .preinit = enp2611_pci_preinit,
185 .scan = enp2611_pci_scan_bus,
186 .map_irq = enp2611_pci_map_irq,
187};
188
189int __init enp2611_pci_init(void)
190{
191 if (machine_is_enp2611())
192 pci_common_init(&enp2611_pci);
193
194 return 0;
195}
196
197subsys_initcall(enp2611_pci_init);
198
199
200
201
202
203static struct flash_platform_data enp2611_flash_platform_data = {
204 .map_name = "cfi_probe",
205 .width = 1,
206};
207
208static struct ixp2000_flash_data enp2611_flash_data = {
209 .platform_data = &enp2611_flash_platform_data,
210 .nr_banks = 1
211};
212
213static struct resource enp2611_flash_resource = {
214 .start = 0xc4000000,
215 .end = 0xc4000000 + 0x00ffffff,
216 .flags = IORESOURCE_MEM,
217};
218
219static struct platform_device enp2611_flash = {
220 .name = "IXP2000-Flash",
221 .id = 0,
222 .dev = {
223 .platform_data = &enp2611_flash_data,
224 },
225 .num_resources = 1,
226 .resource = &enp2611_flash_resource,
227};
228
229static struct ixp2000_i2c_pins enp2611_i2c_gpio_pins = {
230 .sda_pin = ENP2611_GPIO_SDA,
231 .scl_pin = ENP2611_GPIO_SCL,
232};
233
234static struct platform_device enp2611_i2c_controller = {
235 .name = "IXP2000-I2C",
236 .id = 0,
237 .dev = {
238 .platform_data = &enp2611_i2c_gpio_pins
239 },
240 .num_resources = 0
241};
242
243static struct platform_device *enp2611_devices[] __initdata = {
244 &enp2611_flash,
245 &enp2611_i2c_controller
246};
247
248static void __init enp2611_init_machine(void)
249{
250 platform_add_devices(enp2611_devices, ARRAY_SIZE(enp2611_devices));
251 ixp2000_uart_init();
252}
253
254
255MACHINE_START(ENP2611, "Radisys ENP-2611 PCI network processor board")
256
257 .phys_io = IXP2000_UART_PHYS_BASE,
258 .io_pg_offst = ((IXP2000_UART_VIRT_BASE) >> 18) & 0xfffc,
259 .boot_params = 0x00000100,
260 .map_io = enp2611_map_io,
261 .init_irq = ixp2000_init_irq,
262 .timer = &enp2611_timer,
263 .init_machine = enp2611_init_machine,
264MACHINE_END
265
266
267