linux/arch/arm/mach-pxa/mioa701.c
<<
>>
Prefs
   1/*
   2 * Handles the Mitac Mio A701 Board
   3 *
   4 * Copyright (C) 2008 Robert Jarzmik
   5 *
   6 * This program is free software; you can redistribute it and/or modify
   7 * it under the terms of the GNU General Public License as published by
   8 * the Free Software Foundation; either version 2 of the License, or
   9 * (at your option) any later version.
  10 *
  11 * This program is distributed in the hope that it will be useful,
  12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
  13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  14 * GNU General Public License for more details.
  15 *
  16 * You should have received a copy of the GNU General Public License
  17 * along with this program; if not, write to the Free Software
  18 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  19 *
  20 */
  21
  22#include <linux/kernel.h>
  23#include <linux/init.h>
  24#include <linux/platform_device.h>
  25#include <linux/sysdev.h>
  26#include <linux/input.h>
  27#include <linux/delay.h>
  28#include <linux/gpio_keys.h>
  29#include <linux/pwm_backlight.h>
  30#include <linux/rtc.h>
  31#include <linux/leds.h>
  32#include <linux/gpio.h>
  33#include <linux/interrupt.h>
  34#include <linux/irq.h>
  35#include <linux/pda_power.h>
  36#include <linux/power_supply.h>
  37#include <linux/wm97xx_batt.h>
  38#include <linux/mtd/physmap.h>
  39#include <linux/usb/gpio_vbus.h>
  40#include <linux/regulator/max1586.h>
  41
  42#include <asm/mach-types.h>
  43#include <asm/mach/arch.h>
  44
  45#include <mach/pxa27x.h>
  46#include <mach/regs-rtc.h>
  47#include <mach/pxa27x_keypad.h>
  48#include <mach/pxafb.h>
  49#include <mach/mmc.h>
  50#include <mach/udc.h>
  51#include <mach/pxa27x-udc.h>
  52#include <plat/i2c.h>
  53#include <mach/camera.h>
  54#include <mach/audio.h>
  55#include <media/soc_camera.h>
  56
  57#include <mach/mioa701.h>
  58
  59#include "generic.h"
  60#include "devices.h"
  61
  62static unsigned long mioa701_pin_config[] = {
  63        /* Mio global */
  64        MIO_CFG_OUT(GPIO9_CHARGE_EN, AF0, DRIVE_LOW),
  65        MIO_CFG_OUT(GPIO18_POWEROFF, AF0, DRIVE_LOW),
  66        MFP_CFG_OUT(GPIO3, AF0, DRIVE_HIGH),
  67        MFP_CFG_OUT(GPIO4, AF0, DRIVE_HIGH),
  68        MIO_CFG_IN(GPIO80_MAYBE_CHARGE_VDROP, AF0),
  69
  70        /* Backlight PWM 0 */
  71        GPIO16_PWM0_OUT,
  72
  73        /* MMC */
  74        GPIO32_MMC_CLK,
  75        GPIO92_MMC_DAT_0,
  76        GPIO109_MMC_DAT_1,
  77        GPIO110_MMC_DAT_2,
  78        GPIO111_MMC_DAT_3,
  79        GPIO112_MMC_CMD,
  80        MIO_CFG_IN(GPIO78_SDIO_RO, AF0),
  81        MIO_CFG_IN(GPIO15_SDIO_INSERT, AF0),
  82        MIO_CFG_OUT(GPIO91_SDIO_EN, AF0, DRIVE_LOW),
  83
  84        /* USB */
  85        MIO_CFG_IN(GPIO13_nUSB_DETECT, AF0),
  86        MIO_CFG_OUT(GPIO22_USB_ENABLE, AF0, DRIVE_LOW),
  87
  88        /* LCD */
  89        GPIO58_LCD_LDD_0,
  90        GPIO59_LCD_LDD_1,
  91        GPIO60_LCD_LDD_2,
  92        GPIO61_LCD_LDD_3,
  93        GPIO62_LCD_LDD_4,
  94        GPIO63_LCD_LDD_5,
  95        GPIO64_LCD_LDD_6,
  96        GPIO65_LCD_LDD_7,
  97        GPIO66_LCD_LDD_8,
  98        GPIO67_LCD_LDD_9,
  99        GPIO68_LCD_LDD_10,
 100        GPIO69_LCD_LDD_11,
 101        GPIO70_LCD_LDD_12,
 102        GPIO71_LCD_LDD_13,
 103        GPIO72_LCD_LDD_14,
 104        GPIO73_LCD_LDD_15,
 105        GPIO74_LCD_FCLK,
 106        GPIO75_LCD_LCLK,
 107        GPIO76_LCD_PCLK,
 108
 109        /* QCI */
 110        GPIO12_CIF_DD_7,
 111        GPIO17_CIF_DD_6,
 112        GPIO50_CIF_DD_3,
 113        GPIO51_CIF_DD_2,
 114        GPIO52_CIF_DD_4,
 115        GPIO53_CIF_MCLK,
 116        GPIO54_CIF_PCLK,
 117        GPIO55_CIF_DD_1,
 118        GPIO81_CIF_DD_0,
 119        GPIO82_CIF_DD_5,
 120        GPIO84_CIF_FV,
 121        GPIO85_CIF_LV,
 122
 123        /* Bluetooth */
 124        MIO_CFG_IN(GPIO14_BT_nACTIVITY, AF0),
 125        GPIO44_BTUART_CTS,
 126        GPIO42_BTUART_RXD,
 127        GPIO45_BTUART_RTS,
 128        GPIO43_BTUART_TXD,
 129        MIO_CFG_OUT(GPIO83_BT_ON, AF0, DRIVE_LOW),
 130        MIO_CFG_OUT(GPIO77_BT_UNKNOWN1, AF0, DRIVE_HIGH),
 131        MIO_CFG_OUT(GPIO86_BT_MAYBE_nRESET, AF0, DRIVE_HIGH),
 132
 133        /* GPS */
 134        MIO_CFG_OUT(GPIO23_GPS_UNKNOWN1, AF0, DRIVE_LOW),
 135        MIO_CFG_OUT(GPIO26_GPS_ON, AF0, DRIVE_LOW),
 136        MIO_CFG_OUT(GPIO27_GPS_RESET, AF0, DRIVE_LOW),
 137        MIO_CFG_OUT(GPIO106_GPS_UNKNOWN2, AF0, DRIVE_LOW),
 138        MIO_CFG_OUT(GPIO107_GPS_UNKNOWN3, AF0, DRIVE_LOW),
 139        GPIO46_STUART_RXD,
 140        GPIO47_STUART_TXD,
 141
 142        /* GSM */
 143        MIO_CFG_OUT(GPIO24_GSM_MOD_RESET_CMD, AF0, DRIVE_LOW),
 144        MIO_CFG_OUT(GPIO88_GSM_nMOD_ON_CMD, AF0, DRIVE_HIGH),
 145        MIO_CFG_OUT(GPIO90_GSM_nMOD_OFF_CMD, AF0, DRIVE_HIGH),
 146        MIO_CFG_OUT(GPIO114_GSM_nMOD_DTE_UART_STATE, AF0, DRIVE_HIGH),
 147        MIO_CFG_IN(GPIO25_GSM_MOD_ON_STATE, AF0),
 148        MIO_CFG_IN(GPIO113_GSM_EVENT, AF0) | WAKEUP_ON_EDGE_BOTH,
 149        GPIO34_FFUART_RXD,
 150        GPIO35_FFUART_CTS,
 151        GPIO36_FFUART_DCD,
 152        GPIO37_FFUART_DSR,
 153        GPIO39_FFUART_TXD,
 154        GPIO40_FFUART_DTR,
 155        GPIO41_FFUART_RTS,
 156
 157        /* Sound */
 158        GPIO89_AC97_SYSCLK,
 159        MIO_CFG_IN(GPIO12_HPJACK_INSERT, AF0),
 160
 161        /* Leds */
 162        MIO_CFG_OUT(GPIO10_LED_nCharging, AF0, DRIVE_HIGH),
 163        MIO_CFG_OUT(GPIO97_LED_nBlue, AF0, DRIVE_HIGH),
 164        MIO_CFG_OUT(GPIO98_LED_nOrange, AF0, DRIVE_HIGH),
 165        MIO_CFG_OUT(GPIO82_LED_nVibra, AF0, DRIVE_HIGH),
 166        MIO_CFG_OUT(GPIO115_LED_nKeyboard, AF0, DRIVE_HIGH),
 167
 168        /* Keyboard */
 169        MIO_CFG_IN(GPIO0_KEY_POWER, AF0) | WAKEUP_ON_EDGE_BOTH,
 170        MIO_CFG_IN(GPIO93_KEY_VOLUME_UP, AF0),
 171        MIO_CFG_IN(GPIO94_KEY_VOLUME_DOWN, AF0),
 172        GPIO100_KP_MKIN_0,
 173        GPIO101_KP_MKIN_1,
 174        GPIO102_KP_MKIN_2,
 175        GPIO103_KP_MKOUT_0,
 176        GPIO104_KP_MKOUT_1,
 177        GPIO105_KP_MKOUT_2,
 178
 179        /* I2C */
 180        GPIO117_I2C_SCL,
 181        GPIO118_I2C_SDA,
 182
 183        /* Unknown */
 184        MFP_CFG_IN(GPIO20, AF0),
 185        MFP_CFG_IN(GPIO21, AF0),
 186        MFP_CFG_IN(GPIO33, AF0),
 187        MFP_CFG_OUT(GPIO49, AF0, DRIVE_HIGH),
 188        MFP_CFG_OUT(GPIO57, AF0, DRIVE_HIGH),
 189        MFP_CFG_IN(GPIO96, AF0),
 190        MFP_CFG_OUT(GPIO116, AF0, DRIVE_HIGH),
 191};
 192
 193#define MIO_GPIO_IN(num, _desc) \
 194        { .gpio = (num), .dir = 0, .desc = (_desc) }
 195#define MIO_GPIO_OUT(num, _init, _desc) \
 196        { .gpio = (num), .dir = 1, .init = (_init), .desc = (_desc) }
 197struct gpio_ress {
 198        unsigned gpio : 8;
 199        unsigned dir : 1;
 200        unsigned init : 1;
 201        char *desc;
 202};
 203
 204static int mio_gpio_request(struct gpio_ress *gpios, int size)
 205{
 206        int i, rc = 0;
 207        int gpio;
 208        int dir;
 209
 210        for (i = 0; (!rc) && (i < size); i++) {
 211                gpio = gpios[i].gpio;
 212                dir = gpios[i].dir;
 213                rc = gpio_request(gpio, gpios[i].desc);
 214                if (rc) {
 215                        printk(KERN_ERR "Error requesting GPIO %d(%s) : %d\n",
 216                               gpio, gpios[i].desc, rc);
 217                        continue;
 218                }
 219                if (dir)
 220                        gpio_direction_output(gpio, gpios[i].init);
 221                else
 222                        gpio_direction_input(gpio);
 223        }
 224        while ((rc) && (--i >= 0))
 225                gpio_free(gpios[i].gpio);
 226        return rc;
 227}
 228
 229static void mio_gpio_free(struct gpio_ress *gpios, int size)
 230{
 231        int i;
 232
 233        for (i = 0; i < size; i++)
 234                gpio_free(gpios[i].gpio);
 235}
 236
 237/* LCD Screen and Backlight */
 238static struct platform_pwm_backlight_data mioa701_backlight_data = {
 239        .pwm_id         = 0,
 240        .max_brightness = 100,
 241        .dft_brightness = 50,
 242        .pwm_period_ns  = 4000 * 1024,  /* Fl = 250kHz */
 243};
 244
 245/*
 246 * LTM0305A776C LCD panel timings
 247 *
 248 * see:
 249 *  - the LTM0305A776C datasheet,
 250 *  - and the PXA27x Programmers' manual
 251 */
 252static struct pxafb_mode_info mioa701_ltm0305a776c = {
 253        .pixclock               = 220000,       /* CLK=4.545 MHz */
 254        .xres                   = 240,
 255        .yres                   = 320,
 256        .bpp                    = 16,
 257        .hsync_len              = 4,
 258        .vsync_len              = 2,
 259        .left_margin            = 6,
 260        .right_margin           = 4,
 261        .upper_margin           = 5,
 262        .lower_margin           = 3,
 263};
 264
 265static void mioa701_lcd_power(int on, struct fb_var_screeninfo *si)
 266{
 267        gpio_set_value(GPIO87_LCD_POWER, on);
 268}
 269
 270static struct pxafb_mach_info mioa701_pxafb_info = {
 271        .modes                  = &mioa701_ltm0305a776c,
 272        .num_modes              = 1,
 273        .lcd_conn               = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
 274        .pxafb_lcd_power        = mioa701_lcd_power,
 275};
 276
 277/*
 278 * Keyboard configuration
 279 */
 280static unsigned int mioa701_matrix_keys[] = {
 281        KEY(0, 0, KEY_UP),
 282        KEY(0, 1, KEY_RIGHT),
 283        KEY(0, 2, KEY_MEDIA),
 284        KEY(1, 0, KEY_DOWN),
 285        KEY(1, 1, KEY_ENTER),
 286        KEY(1, 2, KEY_CONNECT), /* GPS key */
 287        KEY(2, 0, KEY_LEFT),
 288        KEY(2, 1, KEY_PHONE),   /* Phone Green key */
 289        KEY(2, 2, KEY_CAMERA)   /* Camera key */
 290};
 291static struct pxa27x_keypad_platform_data mioa701_keypad_info = {
 292        .matrix_key_rows = 3,
 293        .matrix_key_cols = 3,
 294        .matrix_key_map = mioa701_matrix_keys,
 295        .matrix_key_map_size = ARRAY_SIZE(mioa701_matrix_keys),
 296};
 297
 298/*
 299 * GPIO Key Configuration
 300 */
 301#define MIO_KEY(key, _gpio, _desc, _wakeup) \
 302        { .code = (key), .gpio = (_gpio), .active_low = 0, \
 303        .desc = (_desc), .type = EV_KEY, .wakeup = (_wakeup) }
 304static struct gpio_keys_button mioa701_button_table[] = {
 305        MIO_KEY(KEY_EXIT, GPIO0_KEY_POWER, "Power button", 1),
 306        MIO_KEY(KEY_VOLUMEUP, GPIO93_KEY_VOLUME_UP, "Volume up", 0),
 307        MIO_KEY(KEY_VOLUMEDOWN, GPIO94_KEY_VOLUME_DOWN, "Volume down", 0),
 308        MIO_KEY(KEY_HP, GPIO12_HPJACK_INSERT, "HP jack detect", 0)
 309};
 310
 311static struct gpio_keys_platform_data mioa701_gpio_keys_data = {
 312        .buttons  = mioa701_button_table,
 313        .nbuttons = ARRAY_SIZE(mioa701_button_table),
 314};
 315
 316/*
 317 * Leds and vibrator
 318 */
 319#define ONE_LED(_gpio, _name) \
 320{ .gpio = (_gpio), .name = (_name), .active_low = true }
 321static struct gpio_led gpio_leds[] = {
 322        ONE_LED(GPIO10_LED_nCharging, "mioa701:charging"),
 323        ONE_LED(GPIO97_LED_nBlue, "mioa701:blue"),
 324        ONE_LED(GPIO98_LED_nOrange, "mioa701:orange"),
 325        ONE_LED(GPIO82_LED_nVibra, "mioa701:vibra"),
 326        ONE_LED(GPIO115_LED_nKeyboard, "mioa701:keyboard")
 327};
 328
 329static struct gpio_led_platform_data gpio_led_info = {
 330        .leds = gpio_leds,
 331        .num_leds = ARRAY_SIZE(gpio_leds),
 332};
 333
 334/*
 335 * GSM Sagem XS200 chip
 336 *
 337 * GSM handling was purged from kernel. For history, this is the way to go :
 338 *   - init : GPIO24_GSM_MOD_RESET_CMD = 0, GPIO114_GSM_nMOD_DTE_UART_STATE = 1
 339 *            GPIO88_GSM_nMOD_ON_CMD = 1, GPIO90_GSM_nMOD_OFF_CMD = 1
 340 *   - reset : GPIO24_GSM_MOD_RESET_CMD = 1, msleep(100),
 341 *             GPIO24_GSM_MOD_RESET_CMD = 0
 342 *   - turn on  : GPIO88_GSM_nMOD_ON_CMD = 0, msleep(1000),
 343 *                GPIO88_GSM_nMOD_ON_CMD = 1
 344 *   - turn off : GPIO90_GSM_nMOD_OFF_CMD = 0, msleep(1000),
 345 *                GPIO90_GSM_nMOD_OFF_CMD = 1
 346 */
 347static int is_gsm_on(void)
 348{
 349        int is_on;
 350
 351        is_on = !!gpio_get_value(GPIO25_GSM_MOD_ON_STATE);
 352        return is_on;
 353}
 354
 355irqreturn_t gsm_on_irq(int irq, void *p)
 356{
 357        printk(KERN_DEBUG "Mioa701: GSM status changed to %s\n",
 358               is_gsm_on() ? "on" : "off");
 359        return IRQ_HANDLED;
 360}
 361
 362struct gpio_ress gsm_gpios[] = {
 363        MIO_GPIO_IN(GPIO25_GSM_MOD_ON_STATE, "GSM state"),
 364        MIO_GPIO_IN(GPIO113_GSM_EVENT, "GSM event"),
 365};
 366
 367static int __init gsm_init(void)
 368{
 369        int rc;
 370
 371        rc = mio_gpio_request(ARRAY_AND_SIZE(gsm_gpios));
 372        if (rc)
 373                goto err_gpio;
 374        rc = request_irq(gpio_to_irq(GPIO25_GSM_MOD_ON_STATE), gsm_on_irq,
 375                         IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
 376                         "GSM XS200 Power Irq", NULL);
 377        if (rc)
 378                goto err_irq;
 379
 380        gpio_set_wake(GPIO113_GSM_EVENT, 1);
 381        return 0;
 382
 383err_irq:
 384        printk(KERN_ERR "Mioa701: Can't request GSM_ON irq\n");
 385        mio_gpio_free(ARRAY_AND_SIZE(gsm_gpios));
 386err_gpio:
 387        printk(KERN_ERR "Mioa701: gsm not available\n");
 388        return rc;
 389}
 390
 391static void gsm_exit(void)
 392{
 393        free_irq(gpio_to_irq(GPIO25_GSM_MOD_ON_STATE), NULL);
 394        mio_gpio_free(ARRAY_AND_SIZE(gsm_gpios));
 395}
 396
 397/*
 398 * Bluetooth BRF6150 chip
 399 *
 400 * BT handling was purged from kernel. For history, this is the way to go :
 401 * - turn on  : GPIO83_BT_ON = 1
 402 * - turn off : GPIO83_BT_ON = 0
 403 */
 404
 405/*
 406 * GPS Sirf Star III chip
 407 *
 408 * GPS handling was purged from kernel. For history, this is the way to go :
 409 * - init : GPIO23_GPS_UNKNOWN1 = 1, GPIO26_GPS_ON = 0, GPIO27_GPS_RESET = 0
 410 *          GPIO106_GPS_UNKNOWN2 = 0, GPIO107_GPS_UNKNOWN3 = 0
 411 * - turn on  : GPIO27_GPS_RESET = 1, GPIO26_GPS_ON = 1
 412 * - turn off : GPIO26_GPS_ON = 0, GPIO27_GPS_RESET = 0
 413 */
 414
 415/*
 416 * USB UDC
 417 */
 418static int is_usb_connected(void)
 419{
 420        return !gpio_get_value(GPIO13_nUSB_DETECT);
 421}
 422
 423static struct pxa2xx_udc_mach_info mioa701_udc_info = {
 424        .udc_is_connected = is_usb_connected,
 425        .gpio_pullup      = GPIO22_USB_ENABLE,
 426};
 427
 428struct gpio_vbus_mach_info gpio_vbus_data = {
 429        .gpio_vbus = GPIO13_nUSB_DETECT,
 430        .gpio_vbus_inverted = 1,
 431        .gpio_pullup = -1,
 432};
 433
 434/*
 435 * SDIO/MMC Card controller
 436 */
 437/**
 438 * The card detect interrupt isn't debounced so we delay it by 250ms
 439 * to give the card a chance to fully insert/eject.
 440 */
 441static struct pxamci_platform_data mioa701_mci_info = {
 442        .ocr_mask               = MMC_VDD_32_33 | MMC_VDD_33_34,
 443        .gpio_card_detect       = GPIO15_SDIO_INSERT,
 444        .gpio_card_ro           = GPIO78_SDIO_RO,
 445        .gpio_power             = GPIO91_SDIO_EN,
 446};
 447
 448/* FlashRAM */
 449static struct resource strataflash_resource = {
 450        .start = PXA_CS0_PHYS,
 451        .end   = PXA_CS0_PHYS + SZ_64M - 1,
 452        .flags = IORESOURCE_MEM,
 453};
 454
 455static struct physmap_flash_data strataflash_data = {
 456        .width = 2,
 457        /* .set_vpp = mioa701_set_vpp, */
 458};
 459
 460static struct platform_device strataflash = {
 461        .name          = "physmap-flash",
 462        .id            = -1,
 463        .resource      = &strataflash_resource,
 464        .num_resources = 1,
 465        .dev = {
 466                .platform_data = &strataflash_data,
 467        },
 468};
 469
 470/*
 471 * Suspend/Resume bootstrap management
 472 *
 473 * MIO A701 reboot sequence is highly ROM dependant. From the one dissassembled,
 474 * this sequence is as follows :
 475 *   - disables interrupts
 476 *   - initialize SDRAM (self refresh RAM into active RAM)
 477 *   - initialize GPIOs (depends on value at 0xa020b020)
 478 *   - initialize coprossessors
 479 *   - if edge detect on PWR_SCL(GPIO3), then proceed to cold start
 480 *   - or if value at 0xa020b000 not equal to 0x0f0f0f0f, proceed to cold start
 481 *   - else do a resume, ie. jump to addr 0xa0100000
 482 */
 483#define RESUME_ENABLE_ADDR      0xa020b000
 484#define RESUME_ENABLE_VAL       0x0f0f0f0f
 485#define RESUME_BT_ADDR          0xa020b020
 486#define RESUME_UNKNOWN_ADDR     0xa020b024
 487#define RESUME_VECTOR_ADDR      0xa0100000
 488#define BOOTSTRAP_WORDS         mioa701_bootstrap_lg/4
 489
 490static u32 *save_buffer;
 491
 492static void install_bootstrap(void)
 493{
 494        int i;
 495        u32 *rom_bootstrap  = phys_to_virt(RESUME_VECTOR_ADDR);
 496        u32 *src = &mioa701_bootstrap;
 497
 498        for (i = 0; i < BOOTSTRAP_WORDS; i++)
 499                rom_bootstrap[i] = src[i];
 500}
 501
 502
 503static int mioa701_sys_suspend(struct sys_device *sysdev, pm_message_t state)
 504{
 505        int i = 0, is_bt_on;
 506        u32 *mem_resume_vector  = phys_to_virt(RESUME_VECTOR_ADDR);
 507        u32 *mem_resume_enabler = phys_to_virt(RESUME_ENABLE_ADDR);
 508        u32 *mem_resume_bt      = phys_to_virt(RESUME_BT_ADDR);
 509        u32 *mem_resume_unknown = phys_to_virt(RESUME_UNKNOWN_ADDR);
 510
 511        /* Devices prepare suspend */
 512        is_bt_on = !!gpio_get_value(GPIO83_BT_ON);
 513        pxa2xx_mfp_set_lpm(GPIO83_BT_ON,
 514                           is_bt_on ? MFP_LPM_DRIVE_HIGH : MFP_LPM_DRIVE_LOW);
 515
 516        for (i = 0; i < BOOTSTRAP_WORDS; i++)
 517                save_buffer[i] = mem_resume_vector[i];
 518        save_buffer[i++] = *mem_resume_enabler;
 519        save_buffer[i++] = *mem_resume_bt;
 520        save_buffer[i++] = *mem_resume_unknown;
 521
 522        *mem_resume_enabler = RESUME_ENABLE_VAL;
 523        *mem_resume_bt      = is_bt_on;
 524
 525        install_bootstrap();
 526        return 0;
 527}
 528
 529static int mioa701_sys_resume(struct sys_device *sysdev)
 530{
 531        int i = 0;
 532        u32 *mem_resume_vector  = phys_to_virt(RESUME_VECTOR_ADDR);
 533        u32 *mem_resume_enabler = phys_to_virt(RESUME_ENABLE_ADDR);
 534        u32 *mem_resume_bt      = phys_to_virt(RESUME_BT_ADDR);
 535        u32 *mem_resume_unknown = phys_to_virt(RESUME_UNKNOWN_ADDR);
 536
 537        for (i = 0; i < BOOTSTRAP_WORDS; i++)
 538                mem_resume_vector[i] = save_buffer[i];
 539        *mem_resume_enabler = save_buffer[i++];
 540        *mem_resume_bt      = save_buffer[i++];
 541        *mem_resume_unknown = save_buffer[i++];
 542
 543        return 0;
 544}
 545
 546static struct sysdev_class mioa701_sysclass = {
 547        .name = "mioa701",
 548};
 549
 550static struct sys_device sysdev_bootstrap = {
 551        .cls            = &mioa701_sysclass,
 552};
 553
 554static struct sysdev_driver driver_bootstrap = {
 555        .suspend        = &mioa701_sys_suspend,
 556        .resume         = &mioa701_sys_resume,
 557};
 558
 559static int __init bootstrap_init(void)
 560{
 561        int rc;
 562        int save_size = mioa701_bootstrap_lg + (sizeof(u32) * 3);
 563
 564        rc = sysdev_class_register(&mioa701_sysclass);
 565        if (rc) {
 566                printk(KERN_ERR "Failed registering mioa701 sys class\n");
 567                return -ENODEV;
 568        }
 569        rc = sysdev_register(&sysdev_bootstrap);
 570        if (rc) {
 571                printk(KERN_ERR "Failed registering mioa701 sys device\n");
 572                return -ENODEV;
 573        }
 574        rc = sysdev_driver_register(&mioa701_sysclass, &driver_bootstrap);
 575        if (rc) {
 576                printk(KERN_ERR "Failed registering PMU sys driver\n");
 577                return -ENODEV;
 578        }
 579
 580        save_buffer = kmalloc(save_size, GFP_KERNEL);
 581        if (!save_buffer)
 582                return -ENOMEM;
 583        printk(KERN_INFO "MioA701: allocated %d bytes for bootstrap\n",
 584               save_size);
 585        return 0;
 586}
 587
 588static void bootstrap_exit(void)
 589{
 590        kfree(save_buffer);
 591        sysdev_driver_unregister(&mioa701_sysclass, &driver_bootstrap);
 592        sysdev_unregister(&sysdev_bootstrap);
 593        sysdev_class_unregister(&mioa701_sysclass);
 594
 595        printk(KERN_CRIT "Unregistering mioa701 suspend will hang next"
 596               "resume !!!\n");
 597}
 598
 599/*
 600 * Power Supply
 601 */
 602static char *supplicants[] = {
 603        "mioa701_battery"
 604};
 605
 606static int is_ac_connected(void)
 607{
 608        return gpio_get_value(GPIO96_AC_DETECT);
 609}
 610
 611static void mioa701_set_charge(int flags)
 612{
 613        gpio_set_value(GPIO9_CHARGE_EN, (flags == PDA_POWER_CHARGE_USB));
 614}
 615
 616static struct pda_power_pdata power_pdata = {
 617        .is_ac_online   = is_ac_connected,
 618        .is_usb_online  = is_usb_connected,
 619        .set_charge = mioa701_set_charge,
 620        .supplied_to = supplicants,
 621        .num_supplicants = ARRAY_SIZE(supplicants),
 622};
 623
 624static struct resource power_resources[] = {
 625        [0] = {
 626                .name   = "ac",
 627                .start  = gpio_to_irq(GPIO96_AC_DETECT),
 628                .end    = gpio_to_irq(GPIO96_AC_DETECT),
 629                .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
 630                IORESOURCE_IRQ_LOWEDGE,
 631        },
 632        [1] = {
 633                .name   = "usb",
 634                .start  = gpio_to_irq(GPIO13_nUSB_DETECT),
 635                .end    = gpio_to_irq(GPIO13_nUSB_DETECT),
 636                .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
 637                IORESOURCE_IRQ_LOWEDGE,
 638        },
 639};
 640
 641static struct platform_device power_dev = {
 642        .name           = "pda-power",
 643        .id             = -1,
 644        .resource       = power_resources,
 645        .num_resources  = ARRAY_SIZE(power_resources),
 646        .dev = {
 647                .platform_data  = &power_pdata,
 648        },
 649};
 650
 651static struct wm97xx_batt_info mioa701_battery_data = {
 652        .batt_aux       = WM97XX_AUX_ID1,
 653        .temp_aux       = -1,
 654        .charge_gpio    = -1,
 655        .min_voltage    = 0xc00,
 656        .max_voltage    = 0xfc0,
 657        .batt_tech      = POWER_SUPPLY_TECHNOLOGY_LION,
 658        .batt_div       = 1,
 659        .batt_mult      = 1,
 660        .batt_name      = "mioa701_battery",
 661};
 662
 663/*
 664 * Voltage regulation
 665 */
 666static struct regulator_consumer_supply max1586_consumers[] = {
 667        {
 668                .supply = "vcc_core",
 669        }
 670};
 671
 672static struct regulator_init_data max1586_v3_info = {
 673        .constraints = {
 674                .name = "vcc_core range",
 675                .min_uV = 1000000,
 676                .max_uV = 1705000,
 677                .always_on = 1,
 678                .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
 679        },
 680        .num_consumer_supplies = ARRAY_SIZE(max1586_consumers),
 681        .consumer_supplies = max1586_consumers,
 682};
 683
 684static struct max1586_subdev_data max1586_subdevs[] = {
 685        { .name = "vcc_core", .id = MAX1586_V3,
 686          .platform_data = &max1586_v3_info },
 687};
 688
 689static struct max1586_platform_data max1586_info = {
 690        .subdevs = max1586_subdevs,
 691        .num_subdevs = ARRAY_SIZE(max1586_subdevs),
 692        .v3_gain = MAX1586_GAIN_NO_R24, /* 700..1475 mV */
 693};
 694
 695/*
 696 * Camera interface
 697 */
 698struct pxacamera_platform_data mioa701_pxacamera_platform_data = {
 699        .flags  = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 |
 700                PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN,
 701        .mclk_10khz = 5000,
 702};
 703
 704static struct i2c_board_info __initdata mioa701_pi2c_devices[] = {
 705        {
 706                I2C_BOARD_INFO("max1586", 0x14),
 707                .platform_data = &max1586_info,
 708        },
 709};
 710
 711/* Board I2C devices. */
 712static struct i2c_board_info __initdata mioa701_i2c_devices[] = {
 713        {
 714                I2C_BOARD_INFO("mt9m111", 0x5d),
 715        },
 716};
 717
 718static struct soc_camera_link iclink = {
 719        .bus_id         = 0, /* Match id in pxa27x_device_camera in device.c */
 720        .board_info     = &mioa701_i2c_devices[0],
 721        .i2c_adapter_id = 0,
 722        .module_name    = "mt9m111",
 723};
 724
 725struct i2c_pxa_platform_data i2c_pdata = {
 726        .fast_mode = 1,
 727};
 728
 729static pxa2xx_audio_ops_t mioa701_ac97_info = {
 730        .reset_gpio = 95,
 731};
 732
 733/*
 734 * Mio global
 735 */
 736
 737/* Devices */
 738#define MIO_PARENT_DEV(var, strname, tparent, pdata)    \
 739static struct platform_device var = {                   \
 740        .name           = strname,                      \
 741        .id             = -1,                           \
 742        .dev            = {                             \
 743                .platform_data = pdata,                 \
 744                .parent = tparent,                      \
 745        },                                              \
 746};
 747#define MIO_SIMPLE_DEV(var, strname, pdata)     \
 748        MIO_PARENT_DEV(var, strname, NULL, pdata)
 749
 750MIO_SIMPLE_DEV(mioa701_gpio_keys, "gpio-keys",      &mioa701_gpio_keys_data)
 751MIO_PARENT_DEV(mioa701_backlight, "pwm-backlight",  &pxa27x_device_pwm0.dev,
 752                &mioa701_backlight_data);
 753MIO_SIMPLE_DEV(mioa701_led,       "leds-gpio",      &gpio_led_info)
 754MIO_SIMPLE_DEV(pxa2xx_pcm,        "pxa2xx-pcm",     NULL)
 755MIO_SIMPLE_DEV(mioa701_sound,     "mioa701-wm9713", NULL)
 756MIO_SIMPLE_DEV(mioa701_board,     "mioa701-board",  NULL)
 757MIO_SIMPLE_DEV(gpio_vbus,         "gpio-vbus",      &gpio_vbus_data);
 758MIO_SIMPLE_DEV(mioa701_camera,    "soc-camera-pdrv",&iclink);
 759
 760static struct platform_device *devices[] __initdata = {
 761        &mioa701_gpio_keys,
 762        &mioa701_backlight,
 763        &mioa701_led,
 764        &pxa2xx_pcm,
 765        &mioa701_sound,
 766        &power_dev,
 767        &strataflash,
 768        &gpio_vbus,
 769        &mioa701_camera,
 770        &mioa701_board,
 771};
 772
 773static void mioa701_machine_exit(void);
 774
 775static void mioa701_poweroff(void)
 776{
 777        mioa701_machine_exit();
 778        arm_machine_restart('s', NULL);
 779}
 780
 781static void mioa701_restart(char c, const char *cmd)
 782{
 783        mioa701_machine_exit();
 784        arm_machine_restart('s', cmd);
 785}
 786
 787static struct gpio_ress global_gpios[] = {
 788        MIO_GPIO_OUT(GPIO9_CHARGE_EN, 1, "Charger enable"),
 789        MIO_GPIO_OUT(GPIO18_POWEROFF, 0, "Power Off"),
 790        MIO_GPIO_OUT(GPIO87_LCD_POWER, 0, "LCD Power"),
 791};
 792
 793static void __init mioa701_machine_init(void)
 794{
 795        PSLR  = 0xff100000; /* SYSDEL=125ms, PWRDEL=125ms, PSLR_SL_ROD=1 */
 796        PCFR = PCFR_DC_EN | PCFR_GPR_EN | PCFR_OPDE;
 797        RTTR = 32768 - 1; /* Reset crazy WinCE value */
 798        UP2OCR = UP2OCR_HXOE;
 799
 800        pxa2xx_mfp_config(ARRAY_AND_SIZE(mioa701_pin_config));
 801        mio_gpio_request(ARRAY_AND_SIZE(global_gpios));
 802        bootstrap_init();
 803        set_pxa_fb_info(&mioa701_pxafb_info);
 804        mioa701_mci_info.detect_delay = msecs_to_jiffies(250);
 805        pxa_set_mci_info(&mioa701_mci_info);
 806        pxa_set_keypad_info(&mioa701_keypad_info);
 807        wm97xx_bat_set_pdata(&mioa701_battery_data);
 808        pxa_set_udc_info(&mioa701_udc_info);
 809        pxa_set_ac97_info(&mioa701_ac97_info);
 810        pm_power_off = mioa701_poweroff;
 811        arm_pm_restart = mioa701_restart;
 812        platform_add_devices(devices, ARRAY_SIZE(devices));
 813        gsm_init();
 814
 815        i2c_register_board_info(1, ARRAY_AND_SIZE(mioa701_pi2c_devices));
 816        pxa_set_i2c_info(&i2c_pdata);
 817        pxa27x_set_i2c_power_info(NULL);
 818        pxa_set_camera_info(&mioa701_pxacamera_platform_data);
 819}
 820
 821static void mioa701_machine_exit(void)
 822{
 823        bootstrap_exit();
 824        gsm_exit();
 825}
 826
 827MACHINE_START(MIOA701, "MIO A701")
 828        .phys_io        = 0x40000000,
 829        .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
 830        .boot_params    = 0xa0000100,
 831        .map_io         = &pxa_map_io,
 832        .init_irq       = &pxa27x_init_irq,
 833        .init_machine   = mioa701_machine_init,
 834        .timer          = &pxa_timer,
 835MACHINE_END
 836